blob: 364ad2d2d58eacec5c477e694773479cc75eafea [file] [log] [blame]
Mike Frysingerad2d1632008-12-22 02:56:07 -05001/*
2 * smc911x_eeprom.c - EEPROM interface to SMC911x parts.
3 * Only tested on SMSC9118 though ...
4 *
Mike Frysingerc44efcf2009-11-12 22:26:02 -05005 * Copyright 2004-2009 Analog Devices Inc.
Mike Frysingerad2d1632008-12-22 02:56:07 -05006 *
7 * Licensed under the GPL-2 or later.
8 *
9 * Based on smc91111_eeprom.c which:
10 * Heavily borrowed from the following peoples GPL'ed software:
11 * - Wolfgang Denk, DENX Software Engineering, wd@denx.de
12 * Das U-boot
13 * - Ladislav Michl ladis@linux-mips.org
14 * A rejected patch on the U-Boot mailing list
15 */
16
17#include <common.h>
Simon Glass24b852a2015-11-08 23:47:45 -070018#include <console.h>
Mike Frysingerad2d1632008-12-22 02:56:07 -050019#include <exports.h>
Jason Hobbs4d91a6e2011-08-23 11:06:54 +000020#include <linux/ctype.h>
Mike Frysingerad2d1632008-12-22 02:56:07 -050021#include "../drivers/net/smc911x.h"
22
23/**
24 * smsc_ctrlc - detect press of CTRL+C (common ctrlc() isnt exported!?)
25 */
26static int smsc_ctrlc(void)
27{
28 return (tstc() && getc() == 0x03);
29}
30
31/**
32 * usage - dump usage information
33 */
34static void usage(void)
35{
36 puts(
37 "MAC/EEPROM Commands:\n"
38 " P : Print the MAC addresses\n"
39 " D : Dump the EEPROM contents\n"
40 " M : Dump the MAC contents\n"
41 " C : Copy the MAC address from the EEPROM to the MAC\n"
42 " W : Write a register in the EEPROM or in the MAC\n"
43 " Q : Quit\n"
44 "\n"
45 "Some commands take arguments:\n"
46 " W <E|M> <register> <value>\n"
47 " E: EEPROM M: MAC\n"
48 );
49}
50
51/**
52 * dump_regs - dump the MAC registers
53 *
54 * Registers 0x00 - 0x50 are FIFOs. The 0x50+ are the control registers
55 * and they're all 32bits long. 0xB8+ are reserved, so don't bother.
56 */
Mike Frysingerc44efcf2009-11-12 22:26:02 -050057static void dump_regs(struct eth_device *dev)
Mike Frysingerad2d1632008-12-22 02:56:07 -050058{
59 u8 i, j = 0;
60 for (i = 0x50; i < 0xB8; i += sizeof(u32))
Mike Frysinger069f4362009-02-25 17:29:40 -050061 printf("%02x: 0x%08x %c", i,
Mike Frysingerc44efcf2009-11-12 22:26:02 -050062 smc911x_reg_read(dev, i),
Mike Frysingerad2d1632008-12-22 02:56:07 -050063 (j++ % 2 ? '\n' : ' '));
64}
65
66/**
67 * do_eeprom_cmd - handle eeprom communication
68 */
Mike Frysingerc44efcf2009-11-12 22:26:02 -050069static int do_eeprom_cmd(struct eth_device *dev, int cmd, u8 reg)
Mike Frysingerad2d1632008-12-22 02:56:07 -050070{
Mike Frysingerc44efcf2009-11-12 22:26:02 -050071 if (smc911x_reg_read(dev, E2P_CMD) & E2P_CMD_EPC_BUSY) {
Mike Frysingerad2d1632008-12-22 02:56:07 -050072 printf("eeprom_cmd: busy at start (E2P_CMD = 0x%08x)\n",
Mike Frysingerc44efcf2009-11-12 22:26:02 -050073 smc911x_reg_read(dev, E2P_CMD));
Mike Frysingerad2d1632008-12-22 02:56:07 -050074 return -1;
75 }
76
Mike Frysingerc44efcf2009-11-12 22:26:02 -050077 smc911x_reg_write(dev, E2P_CMD, E2P_CMD_EPC_BUSY | cmd | reg);
Mike Frysingerad2d1632008-12-22 02:56:07 -050078
Mike Frysingerc44efcf2009-11-12 22:26:02 -050079 while (smc911x_reg_read(dev, E2P_CMD) & E2P_CMD_EPC_BUSY)
Mike Frysingerad2d1632008-12-22 02:56:07 -050080 if (smsc_ctrlc()) {
81 printf("eeprom_cmd: timeout (E2P_CMD = 0x%08x)\n",
Mike Frysingerc44efcf2009-11-12 22:26:02 -050082 smc911x_reg_read(dev, E2P_CMD));
Mike Frysingerad2d1632008-12-22 02:56:07 -050083 return -1;
84 }
85
86 return 0;
87}
88
89/**
90 * read_eeprom_reg - read specified register in EEPROM
91 */
Mike Frysingerc44efcf2009-11-12 22:26:02 -050092static u8 read_eeprom_reg(struct eth_device *dev, u8 reg)
Mike Frysingerad2d1632008-12-22 02:56:07 -050093{
Mike Frysingerc44efcf2009-11-12 22:26:02 -050094 int ret = do_eeprom_cmd(dev, E2P_CMD_EPC_CMD_READ, reg);
95 return (ret ? : smc911x_reg_read(dev, E2P_DATA));
Mike Frysingerad2d1632008-12-22 02:56:07 -050096}
97
98/**
99 * write_eeprom_reg - write specified value into specified register in EEPROM
100 */
Mike Frysingerc44efcf2009-11-12 22:26:02 -0500101static int write_eeprom_reg(struct eth_device *dev, u8 value, u8 reg)
Mike Frysingerad2d1632008-12-22 02:56:07 -0500102{
103 int ret;
104
105 /* enable erasing/writing */
Mike Frysingerc44efcf2009-11-12 22:26:02 -0500106 ret = do_eeprom_cmd(dev, E2P_CMD_EPC_CMD_EWEN, reg);
Mike Frysingerad2d1632008-12-22 02:56:07 -0500107 if (ret)
108 goto done;
109
110 /* erase the eeprom reg */
Mike Frysingerc44efcf2009-11-12 22:26:02 -0500111 ret = do_eeprom_cmd(dev, E2P_CMD_EPC_CMD_ERASE, reg);
Mike Frysingerad2d1632008-12-22 02:56:07 -0500112 if (ret)
113 goto done;
114
115 /* write the eeprom reg */
Mike Frysingerc44efcf2009-11-12 22:26:02 -0500116 smc911x_reg_write(dev, E2P_DATA, value);
117 ret = do_eeprom_cmd(dev, E2P_CMD_EPC_CMD_WRITE, reg);
Mike Frysingerad2d1632008-12-22 02:56:07 -0500118 if (ret)
119 goto done;
120
121 /* disable erasing/writing */
Mike Frysingerc44efcf2009-11-12 22:26:02 -0500122 ret = do_eeprom_cmd(dev, E2P_CMD_EPC_CMD_EWDS, reg);
Mike Frysingerad2d1632008-12-22 02:56:07 -0500123
124 done:
125 return ret;
126}
127
128/**
129 * skip_space - find first non-whitespace in given pointer
130 */
131static char *skip_space(char *buf)
132{
Jason Hobbs4d91a6e2011-08-23 11:06:54 +0000133 while (isblank(buf[0]))
Mike Frysingerad2d1632008-12-22 02:56:07 -0500134 ++buf;
135 return buf;
136}
137
138/**
139 * write_stuff - handle writing of MAC registers / eeprom
140 */
Mike Frysingerc44efcf2009-11-12 22:26:02 -0500141static void write_stuff(struct eth_device *dev, char *line)
Mike Frysingerad2d1632008-12-22 02:56:07 -0500142{
143 char dest;
144 char *endp;
145 u8 reg;
146 u32 value;
147
148 /* Skip over the "W " part of the command */
149 line = skip_space(line + 1);
150
151 /* Figure out destination */
152 switch (line[0]) {
153 case 'E':
154 case 'M':
155 dest = line[0];
156 break;
157 default:
158 invalid_usage:
159 printf("ERROR: Invalid write usage\n");
160 usage();
161 return;
162 }
163
164 /* Get the register to write */
165 line = skip_space(line + 1);
166 reg = simple_strtoul(line, &endp, 16);
167 if (line == endp)
168 goto invalid_usage;
169
170 /* Get the value to write */
171 line = skip_space(endp);
172 value = simple_strtoul(line, &endp, 16);
173 if (line == endp)
174 goto invalid_usage;
175
176 /* Check for trailing cruft */
177 line = skip_space(endp);
178 if (line[0])
179 goto invalid_usage;
180
181 /* Finally, execute the command */
182 if (dest == 'E') {
183 printf("Writing EEPROM register %02x with %02x\n", reg, value);
Mike Frysingerc44efcf2009-11-12 22:26:02 -0500184 write_eeprom_reg(dev, value, reg);
Mike Frysingerad2d1632008-12-22 02:56:07 -0500185 } else {
186 printf("Writing MAC register %02x with %08x\n", reg, value);
Mike Frysingerc44efcf2009-11-12 22:26:02 -0500187 smc911x_reg_write(dev, reg, value);
Mike Frysingerad2d1632008-12-22 02:56:07 -0500188 }
189}
190
191/**
192 * copy_from_eeprom - copy MAC address in eeprom to address registers
193 */
Mike Frysingerc44efcf2009-11-12 22:26:02 -0500194static void copy_from_eeprom(struct eth_device *dev)
Mike Frysingerad2d1632008-12-22 02:56:07 -0500195{
196 ulong addrl =
Mike Frysingerc44efcf2009-11-12 22:26:02 -0500197 read_eeprom_reg(dev, 0x01) |
198 read_eeprom_reg(dev, 0x02) << 8 |
199 read_eeprom_reg(dev, 0x03) << 16 |
200 read_eeprom_reg(dev, 0x04) << 24;
Mike Frysingerad2d1632008-12-22 02:56:07 -0500201 ulong addrh =
Mike Frysingerc44efcf2009-11-12 22:26:02 -0500202 read_eeprom_reg(dev, 0x05) |
203 read_eeprom_reg(dev, 0x06) << 8;
204 smc911x_set_mac_csr(dev, ADDRL, addrl);
205 smc911x_set_mac_csr(dev, ADDRH, addrh);
Mike Frysingerad2d1632008-12-22 02:56:07 -0500206 puts("EEPROM contents copied to MAC\n");
207}
208
209/**
210 * print_macaddr - print MAC address registers and MAC address in eeprom
211 */
Mike Frysingerc44efcf2009-11-12 22:26:02 -0500212static void print_macaddr(struct eth_device *dev)
Mike Frysingerad2d1632008-12-22 02:56:07 -0500213{
214 puts("Current MAC Address in MAC: ");
Mike Frysingerc44efcf2009-11-12 22:26:02 -0500215 ulong addrl = smc911x_get_mac_csr(dev, ADDRL);
216 ulong addrh = smc911x_get_mac_csr(dev, ADDRH);
Mike Frysingerad2d1632008-12-22 02:56:07 -0500217 printf("%02x:%02x:%02x:%02x:%02x:%02x\n",
218 (u8)(addrl), (u8)(addrl >> 8), (u8)(addrl >> 16),
219 (u8)(addrl >> 24), (u8)(addrh), (u8)(addrh >> 8));
220
221 puts("Current MAC Address in EEPROM: ");
222 int i;
223 for (i = 1; i < 6; ++i)
Mike Frysingerc44efcf2009-11-12 22:26:02 -0500224 printf("%02x:", read_eeprom_reg(dev, i));
225 printf("%02x\n", read_eeprom_reg(dev, i));
Mike Frysingerad2d1632008-12-22 02:56:07 -0500226}
227
228/**
229 * dump_eeprom - dump the whole content of the EEPROM
230 */
Mike Frysingerc44efcf2009-11-12 22:26:02 -0500231static void dump_eeprom(struct eth_device *dev)
Mike Frysingerad2d1632008-12-22 02:56:07 -0500232{
233 int i;
234 puts("EEPROM:\n");
235 for (i = 0; i < 7; ++i)
Mike Frysingerc44efcf2009-11-12 22:26:02 -0500236 printf("%02x: 0x%02x\n", i, read_eeprom_reg(dev, i));
Mike Frysingerad2d1632008-12-22 02:56:07 -0500237}
238
239/**
240 * smc911x_init - get the MAC/EEPROM up and ready for use
241 */
Mike Frysingerc44efcf2009-11-12 22:26:02 -0500242static int smc911x_init(struct eth_device *dev)
Mike Frysingerad2d1632008-12-22 02:56:07 -0500243{
244 /* See if there is anything there */
Juergen Kilbaa9fba52010-06-12 21:22:01 +0200245 if (smc911x_detect_chip(dev))
Mike Frysingerad2d1632008-12-22 02:56:07 -0500246 return 1;
247
Mike Frysingerc44efcf2009-11-12 22:26:02 -0500248 smc911x_reset(dev);
Mike Frysingerad2d1632008-12-22 02:56:07 -0500249
250 /* Make sure we set EEDIO/EECLK to the EEPROM */
Mike Frysingerc44efcf2009-11-12 22:26:02 -0500251 if (smc911x_reg_read(dev, GPIO_CFG) & GPIO_CFG_EEPR_EN) {
252 while (smc911x_reg_read(dev, E2P_CMD) & E2P_CMD_EPC_BUSY)
Mike Frysingerad2d1632008-12-22 02:56:07 -0500253 if (smsc_ctrlc()) {
Mike Frysinger069f4362009-02-25 17:29:40 -0500254 printf("init: timeout (E2P_CMD = 0x%08x)\n",
Mike Frysingerc44efcf2009-11-12 22:26:02 -0500255 smc911x_reg_read(dev, E2P_CMD));
Mike Frysingerad2d1632008-12-22 02:56:07 -0500256 return 1;
257 }
Mike Frysingerc44efcf2009-11-12 22:26:02 -0500258 smc911x_reg_write(dev, GPIO_CFG,
259 smc911x_reg_read(dev, GPIO_CFG) & ~GPIO_CFG_EEPR_EN);
Mike Frysingerad2d1632008-12-22 02:56:07 -0500260 }
261
262 return 0;
263}
264
265/**
266 * getline - consume a line of input and handle some escape sequences
267 */
268static char *getline(void)
269{
270 static char buffer[100];
271 char c;
272 size_t i;
273
274 i = 0;
275 while (1) {
276 buffer[i] = '\0';
277 while (!tstc())
278 continue;
279
280 c = getc();
281 /* Convert to uppercase */
282 if (c >= 'a' && c <= 'z')
283 c -= ('a' - 'A');
284
285 switch (c) {
286 case '\r': /* Enter/Return key */
287 case '\n':
288 puts("\n");
289 return buffer;
290
291 case 0x03: /* ^C - break */
292 return NULL;
293
294 case 0x5F:
295 case 0x08: /* ^H - backspace */
296 case 0x7F: /* DEL - backspace */
297 if (i) {
298 puts("\b \b");
299 i--;
300 }
301 break;
302
303 default:
304 /* Ignore control characters */
305 if (c < 0x20)
306 break;
307 /* Queue up all other characters */
308 buffer[i++] = c;
309 printf("%c", c);
310 break;
311 }
312 }
313}
314
315/**
316 * smc911x_eeprom - our application's main() function
317 */
Wolfgang Denk54841ab2010-06-28 22:00:46 +0200318int smc911x_eeprom(int argc, char * const argv[])
Mike Frysingerad2d1632008-12-22 02:56:07 -0500319{
Mike Frysingerc44efcf2009-11-12 22:26:02 -0500320 /* Avoid initializing on stack as gcc likes to call memset() */
321 struct eth_device dev;
Mike Frysingerc44efcf2009-11-12 22:26:02 -0500322 dev.iobase = CONFIG_SMC911X_BASE;
323
Mike Frysingerad2d1632008-12-22 02:56:07 -0500324 /* Print the ABI version */
325 app_startup(argv);
326 if (XF_VERSION != get_version()) {
327 printf("Expects ABI version %d\n", XF_VERSION);
328 printf("Actual U-Boot ABI version %lu\n", get_version());
329 printf("Can't run\n\n");
330 return 1;
331 }
332
333 /* Initialize the MAC/EEPROM somewhat */
334 puts("\n");
Mike Frysingerc44efcf2009-11-12 22:26:02 -0500335 if (smc911x_init(&dev))
Mike Frysingerad2d1632008-12-22 02:56:07 -0500336 return 1;
337
338 /* Dump helpful usage information */
339 puts("\n");
340 usage();
341 puts("\n");
342
343 while (1) {
344 char *line;
345
346 /* Send the prompt and wait for a line */
347 puts("eeprom> ");
348 line = getline();
349
350 /* Got a ctrl+c */
351 if (!line)
352 return 0;
353
354 /* Eat leading space */
355 line = skip_space(line);
356
357 /* Empty line, try again */
358 if (!line[0])
359 continue;
360
361 /* Only accept 1 letter commands */
Jason Hobbs4d91a6e2011-08-23 11:06:54 +0000362 if (line[0] && line[1] && !isblank(line[1]))
Mike Frysingerad2d1632008-12-22 02:56:07 -0500363 goto unknown_cmd;
364
365 /* Now parse the command */
366 switch (line[0]) {
Mike Frysingerc44efcf2009-11-12 22:26:02 -0500367 case 'W': write_stuff(&dev, line); break;
368 case 'D': dump_eeprom(&dev); break;
369 case 'M': dump_regs(&dev); break;
370 case 'C': copy_from_eeprom(&dev); break;
371 case 'P': print_macaddr(&dev); break;
Mike Frysingerad2d1632008-12-22 02:56:07 -0500372 unknown_cmd:
373 default: puts("ERROR: Unknown command!\n\n");
374 case '?':
375 case 'H': usage(); break;
376 case 'Q': return 0;
377 }
378 }
379}