blob: af066f3a8ad817cd77f40a657e154c5f042cc460 [file] [log] [blame]
Stefan Roese211ea912007-10-22 07:34:34 +02001/*
Stefan Roese869d14b2008-05-10 10:30:36 +02002 * (C) Copyright 2007-2008
Stefan Roese211ea912007-10-22 07:34:34 +02003 * Stefan Roese, DENX Software Engineering, sr@denx.de.
4 *
5 * See file CREDITS for list of people who contributed to this
6 * project.
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21 * MA 02111-1307 USA
22 */
23
24/************************************************************************
25 * makalu.h - configuration for AMCC Makalu (405EX)
26 ***********************************************************************/
27
28#ifndef __CONFIG_H
29#define __CONFIG_H
30
31/*-----------------------------------------------------------------------
32 * High Level Configuration Options
33 *----------------------------------------------------------------------*/
34#define CONFIG_MAKALU 1 /* Board is Makalu */
35#define CONFIG_4xx 1 /* ... PPC4xx family */
36#define CONFIG_405EX 1 /* Specifc 405EX support*/
37#define CONFIG_SYS_CLK_FREQ 33330000 /* ext frequency to pll */
38
39#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
40#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */
41
42/*-----------------------------------------------------------------------
43 * Base addresses -- Note these are effective addresses where the
44 * actual resources get mapped (not physical addresses)
45 *----------------------------------------------------------------------*/
46#define CFG_SDRAM_BASE 0x00000000
Stefan Roeseecdcbd42007-11-16 14:00:59 +010047#define CFG_FLASH_BASE 0xFC000000
Stefan Roese211ea912007-10-22 07:34:34 +020048#define CFG_FPGA_BASE 0xF0000000
49#define CFG_PERIPHERAL_BASE 0xEF600000 /* internal peripherals*/
50#define CFG_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Monitor */
Stefan Roeseecdcbd42007-11-16 14:00:59 +010051#define CFG_MALLOC_LEN (512 * 1024) /* Reserve 512 kB for malloc() */
Stefan Roese211ea912007-10-22 07:34:34 +020052#define CFG_MONITOR_BASE (TEXT_BASE)
53
54/*-----------------------------------------------------------------------
55 * Initial RAM & stack pointer
56 *----------------------------------------------------------------------*/
57#define CFG_INIT_RAM_ADDR 0x02000000 /* inside of SDRAM */
58#define CFG_INIT_RAM_END (4 << 10)
59#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data */
60#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
61/* reserve some memory for POST and BOOT limit info */
62#define CFG_INIT_SP_OFFSET (CFG_GBL_DATA_OFFSET - 16)
63
64/* extra data in init-ram */
65#define CFG_POST_WORD_ADDR (CFG_GBL_DATA_OFFSET - 4)
66#define CFG_POST_MAGIC (CFG_INIT_RAM_ADDR + CFG_GBL_DATA_OFFSET - 8)
67#define CFG_POST_VAL (CFG_INIT_RAM_ADDR + CFG_GBL_DATA_OFFSET - 12)
68#define CFG_OCM_DATA_ADDR CFG_INIT_RAM_ADDR /* for commproc.c */
69
70/*-----------------------------------------------------------------------
71 * Serial Port
72 *----------------------------------------------------------------------*/
73#undef CFG_EXT_SERIAL_CLOCK /* no ext. clk */
74#define CONFIG_BAUDRATE 115200
75#define CONFIG_SERIAL_MULTI 1
76/* define this if you want console on UART1 */
77#undef CONFIG_UART1_CONSOLE
78
79#define CFG_BAUDRATE_TABLE \
80 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
81
82/*-----------------------------------------------------------------------
83 * Environment
84 *----------------------------------------------------------------------*/
85#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */
86
87/*-----------------------------------------------------------------------
88 * FLASH related
89 *----------------------------------------------------------------------*/
90#define CFG_FLASH_CFI /* The flash is CFI compatible */
91#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */
92
93#define CFG_FLASH_BANKS_LIST {CFG_FLASH_BASE}
94#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
95#define CFG_MAX_FLASH_SECT 512 /* max number of sectors on one chip */
96
97#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
98#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
99
100#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
101#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
102
103#ifdef CFG_ENV_IS_IN_FLASH
Wolfgang Denk53677ef2008-05-20 16:00:29 +0200104#define CFG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */
Stefan Roese211ea912007-10-22 07:34:34 +0200105#define CFG_ENV_ADDR (CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE)
106#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
107
108/* Address and size of Redundant Environment Sector */
109#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
110#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
111#endif /* CFG_ENV_IS_IN_FLASH */
112
113/*-----------------------------------------------------------------------
114 * DDR SDRAM
115 *----------------------------------------------------------------------*/
Stefan Roeseecdcbd42007-11-16 14:00:59 +0100116#define CFG_MBYTES_SDRAM 256
Stefan Roese211ea912007-10-22 07:34:34 +0200117
118/*-----------------------------------------------------------------------
119 * I2C
120 *----------------------------------------------------------------------*/
121#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
122#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
123#define CFG_I2C_SLAVE 0x7F
124
125#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 6 /* 24C02 requires 5ms delay */
126#define CFG_I2C_EEPROM_ADDR 0x52 /* I2C boot EEPROM (24C02BN) */
127#define CFG_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */
128
129/* Standard DTT sensor configuration */
130#define CONFIG_DTT_DS1775 1
131#define CONFIG_DTT_SENSORS { 0 }
132#define CFG_I2C_DTT_ADDR 0x48
133
134/* RTC configuration */
135#define CONFIG_RTC_X1205 1
136#define CFG_I2C_RTC_ADDR 0x6f
137
138/*-----------------------------------------------------------------------
139 * Ethernet
140 *----------------------------------------------------------------------*/
141#define CONFIG_M88E1111_PHY 1
142#define CONFIG_IBM_EMAC4_V4 1
143#define CONFIG_MII 1 /* MII PHY management */
144#define CONFIG_PHY_ADDR 6 /* PHY address, See schematics */
145
146#define CONFIG_PHY_RESET 1 /* reset phy upon startup */
147#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */
148
149#define CONFIG_HAS_ETH0 1
150
151#define CONFIG_NET_MULTI 1
152#define CONFIG_HAS_ETH1 1 /* add support for "eth1addr" */
Stefan Roeseecdcbd42007-11-16 14:00:59 +0100153#define CONFIG_PHY1_ADDR 0
Stefan Roese211ea912007-10-22 07:34:34 +0200154
155#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */
156
157#define CONFIG_PREBOOT "echo;" \
Wolfgang Denk32bf3d12008-03-03 12:16:44 +0100158 "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
Stefan Roese211ea912007-10-22 07:34:34 +0200159 "echo"
160
161#undef CONFIG_BOOTARGS
162
163#define CONFIG_EXTRA_ENV_SETTINGS \
164 "logversion=2\0" \
165 "netdev=eth0\0" \
166 "hostname=makalu\0" \
167 "nfsargs=setenv bootargs root=/dev/nfs rw " \
168 "nfsroot=${serverip}:${rootpath}\0" \
169 "ramargs=setenv bootargs root=/dev/ram rw\0" \
170 "addip=setenv bootargs ${bootargs} " \
171 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
172 ":${hostname}:${netdev}:off panic=1\0" \
173 "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
174 "addmisc=setenv bootargs ${bootargs} rtc-x1205.probe=0,0x6f\0" \
Stefan Roese869d14b2008-05-10 10:30:36 +0200175 "flash_self_old=run ramargs addip addtty addmisc;" \
Stefan Roese211ea912007-10-22 07:34:34 +0200176 "bootm ${kernel_addr} ${ramdisk_addr}\0" \
Stefan Roese869d14b2008-05-10 10:30:36 +0200177 "flash_self=run ramargs addip addtty addmisc;" \
178 "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \
179 "flash_nfs_old=run nfsargs addip addtty addmisc;" \
180 "bootm ${kernel_addr}\0" \
181 "flash_nfs=run nfsargs addip addtty addmisc;" \
182 "bootm ${kernel_addr} - ${fdt_addr}\0" \
183 "net_nfs_old=tftp ${kernel_addr_r} ${bootfile};" \
184 "run nfsargs addip addtty addmisc;" \
185 "bootm ${kernel_addr_r}\0" \
186 "net_nfs=tftp ${kernel_addr_r} ${bootfile}; " \
187 "tftp ${fdt_addr_r} ${fdt_file}; " \
188 "run nfsargs addip addtty addmisc;" \
189 "bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \
Stefan Roese211ea912007-10-22 07:34:34 +0200190 "rootpath=/opt/eldk/ppc_4xx\0" \
191 "bootfile=makalu/uImage\0" \
192 "fdt_file=makalu/makalu.dtb\0" \
Stefan Roese869d14b2008-05-10 10:30:36 +0200193 "kernel_addr_r=400000\0" \
194 "fdt_addr_r=800000\0" \
Stefan Roeseecdcbd42007-11-16 14:00:59 +0100195 "kernel_addr=fc000000\0" \
Stefan Roese869d14b2008-05-10 10:30:36 +0200196 "fdt_addr=fc1e0000\0" \
Stefan Roeseecdcbd42007-11-16 14:00:59 +0100197 "ramdisk_addr=fc200000\0" \
Stefan Roese211ea912007-10-22 07:34:34 +0200198 "initrd_high=30000000\0" \
199 "load=tftp 200000 makalu/u-boot.bin\0" \
200 "update=protect off fffa0000 ffffffff;era fffa0000 ffffffff;" \
201 "cp.b ${fileaddr} fffa0000 ${filesize};" \
202 "setenv filesize;saveenv\0" \
203 "upd=run load update\0" \
204 "pciconfighost=1\0" \
205 "pcie_mode=RP:RP\0" \
206 ""
207#define CONFIG_BOOTCOMMAND "run flash_self"
208
209#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
210
211#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
212#define CFG_LOADS_BAUD_CHANGE /* allow baudrate change */
213
214/*
215 * BOOTP options
216 */
217#define CONFIG_BOOTP_BOOTFILESIZE
218#define CONFIG_BOOTP_BOOTPATH
219#define CONFIG_BOOTP_GATEWAY
220#define CONFIG_BOOTP_HOSTNAME
Stefan Roese869d14b2008-05-10 10:30:36 +0200221#define CONFIG_BOOTP_SUBNETMASK
Stefan Roese211ea912007-10-22 07:34:34 +0200222
223/*
224 * Command line configuration.
225 */
226#include <config_cmd_default.h>
227
228#define CONFIG_CMD_ASKENV
229#define CONFIG_CMD_DATE
230#define CONFIG_CMD_DHCP
231#define CONFIG_CMD_DIAG
232#define CONFIG_CMD_DTT
233#define CONFIG_CMD_EEPROM
234#define CONFIG_CMD_ELF
235#define CONFIG_CMD_I2C
236#define CONFIG_CMD_IRQ
237#define CONFIG_CMD_LOG
238#define CONFIG_CMD_MII
239#define CONFIG_CMD_NET
240#define CONFIG_CMD_NFS
241#define CONFIG_CMD_PCI
242#define CONFIG_CMD_PING
243#define CONFIG_CMD_REGINFO
Stefan Roeseafe9fa52007-10-22 16:24:44 +0200244#define CONFIG_CMD_SNTP
Stefan Roese211ea912007-10-22 07:34:34 +0200245
246/* POST support */
247#define CONFIG_POST (CFG_POST_MEMORY | \
248 CFG_POST_CACHE | \
249 CFG_POST_CPU | \
250 CFG_POST_ETHER | \
251 CFG_POST_I2C | \
252 CFG_POST_MEMORY | \
253 CFG_POST_UART)
254
255/* Define here the base-addresses of the UARTs to test in POST */
256#define CFG_POST_UART_TABLE {UART0_BASE, UART1_BASE}
257
258#define CONFIG_LOGBUFFER
259#define CFG_POST_CACHE_ADDR 0x00800000 /* free virtual address */
260
261#define CFG_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */
262
263#undef CONFIG_WATCHDOG /* watchdog disabled */
264
265/*-----------------------------------------------------------------------
266 * Miscellaneous configurable options
267 *----------------------------------------------------------------------*/
268#define CFG_LONGHELP /* undef to save memory */
269#define CFG_PROMPT "=> " /* Monitor Command Prompt */
270#if defined(CONFIG_CMD_KGDB)
271#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
272#else
273#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
274#endif
275#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
276#define CFG_MAXARGS 16 /* max number of command args */
277#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
278
279#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
280#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
281
282#define CFG_LOAD_ADDR 0x100000 /* default load address */
283#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
284
285#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
286
287#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
288#define CONFIG_LOOPW 1 /* enable loopw command */
289#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */
290#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
291#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
Stefan Roeseecdcbd42007-11-16 14:00:59 +0100292#define CFG_CONSOLE_INFO_QUIET 1 /* don't print console @ startup*/
Stefan Roese211ea912007-10-22 07:34:34 +0200293
294/*-----------------------------------------------------------------------
295 * PCI stuff
296 *----------------------------------------------------------------------*/
297#define CONFIG_PCI /* include pci support */
298#define CONFIG_PCI_PNP 1 /* do pci plug-and-play */
299#define CONFIG_PCI_SCAN_SHOW 1 /* show pci devices on startup */
300#define CONFIG_PCI_CONFIG_HOST_BRIDGE
301
302/*-----------------------------------------------------------------------
303 * PCIe stuff
304 *----------------------------------------------------------------------*/
305#define CFG_PCIE_MEMBASE 0x90000000 /* mapped PCIe memory */
306#define CFG_PCIE_MEMSIZE 0x08000000 /* 128 Meg, smallest incr per port */
307
308#define CFG_PCIE0_CFGBASE 0xa0000000 /* remote access */
309#define CFG_PCIE0_XCFGBASE 0xb0000000 /* local access */
310#define CFG_PCIE0_CFGMASK 0xe0000001 /* 512 Meg */
311
312#define CFG_PCIE1_CFGBASE 0xc0000000 /* remote access */
313#define CFG_PCIE1_XCFGBASE 0xd0000000 /* local access */
314#define CFG_PCIE1_CFGMASK 0xe0000001 /* 512 Meg */
315
316#define CFG_PCIE0_UTLBASE 0xef502000
317#define CFG_PCIE1_UTLBASE 0xef503000
318
319/* base address of inbound PCIe window */
320#define CFG_PCIE_INBOUND_BASE 0x0000000000000000ULL
321
322/*
323 * For booting Linux, the board info and command line data
324 * have to be in the first 8 MB of memory, since this is
325 * the maximum mapped by the Linux kernel during initialization.
326 */
327#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
328
329/*-----------------------------------------------------------------------
Stefan Roese211ea912007-10-22 07:34:34 +0200330 * External Bus Controller (EBC) Setup
331 *----------------------------------------------------------------------*/
332/* Memory Bank 0 (NOR-FLASH) initialization */
Stefan Roese63362cf2007-11-26 15:06:14 +0100333#define CFG_EBC_PB0AP 0x08033700
Stefan Roeseecdcbd42007-11-16 14:00:59 +0100334#define CFG_EBC_PB0CR (CFG_FLASH_BASE | 0xda000)
Stefan Roese211ea912007-10-22 07:34:34 +0200335
336/* Memory Bank 2 (CPLD) initialization */
337#define CFG_EBC_PB2AP 0x9400C800
338#define CFG_EBC_PB2CR 0xF0018000 /* BAS=0x800,BS=1MB,BU=R/W,BW=8bit */
339
340#define CFG_EBC_CFG 0x7FC00000 /* EBC0_CFG */
341
342/*-----------------------------------------------------------------------
343 * GPIO Setup
344 *----------------------------------------------------------------------*/
Stefan Roeseecdcbd42007-11-16 14:00:59 +0100345#define CFG_4xx_GPIO_TABLE { /* Out GPIO Alternate1 Alternate2 Alternate3 */ \
346{ \
347/* GPIO Core 0 */ \
348{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_0}, /* GPIO0 EBC_DATA_PAR(0) */ \
349{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_0}, /* GPIO1 EBC_DATA_PAR(1) */ \
350{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_0}, /* GPIO2 EBC_DATA_PAR(2) */ \
351{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_0}, /* GPIO3 EBC_DATA_PAR(3) */ \
Stefan Roese7cfc12a2007-12-08 14:47:34 +0100352{GPIO0_BASE, GPIO_BI, GPIO_ALT2, GPIO_OUT_0}, /* GPIO4 EBC_DATA(20) USB2_DATA(4) */ \
353{GPIO0_BASE, GPIO_BI, GPIO_ALT2, GPIO_OUT_0}, /* GPIO5 EBC_DATA(21) USB2_DATA(5) */ \
354{GPIO0_BASE, GPIO_BI, GPIO_ALT2, GPIO_OUT_0}, /* GPIO6 EBC_DATA(22) USB2_DATA(6) */ \
355{GPIO0_BASE, GPIO_BI, GPIO_ALT2, GPIO_OUT_0}, /* GPIO7 EBC_DATA(23) USB2_DATA(7) */ \
Stefan Roese8be76092007-11-27 11:57:35 +0100356{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO8 CS(1)/NFCE(1) IRQ(7) */ \
357{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO9 CS(2)/NFCE(2) IRQ(8) */ \
358{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO10 CS(3)/NFCE(3) IRQ(9) */ \
Stefan Roeseecdcbd42007-11-16 14:00:59 +0100359{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO11 IRQ(6) */ \
Stefan Roese7cfc12a2007-12-08 14:47:34 +0100360{GPIO0_BASE, GPIO_BI, GPIO_ALT2, GPIO_OUT_0}, /* GPIO12 EBC_DATA(16) USB2_DATA(0) */ \
361{GPIO0_BASE, GPIO_BI, GPIO_ALT2, GPIO_OUT_0}, /* GPIO13 EBC_DATA(17) USB2_DATA(1) */ \
362{GPIO0_BASE, GPIO_BI, GPIO_ALT2, GPIO_OUT_0}, /* GPIO14 EBC_DATA(18) USB2_DATA(2) */ \
363{GPIO0_BASE, GPIO_BI, GPIO_ALT2, GPIO_OUT_0}, /* GPIO15 EBC_DATA(19) USB2_DATA(3) */ \
Stefan Roeseecdcbd42007-11-16 14:00:59 +0100364{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO16 UART0_DCD UART1_CTS */ \
365{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO17 UART0_DSR UART1_RTS */ \
366{GPIO0_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_0}, /* GPIO18 UART0_CTS */ \
367{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO19 UART0_RTS */ \
368{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_0}, /* GPIO20 UART0_DTR UART1_TX */ \
369{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_0}, /* GPIO21 UART0_RI UART1_RX */ \
370{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_0}, /* GPIO22 EBC_HOLD_REQ DMA_ACK2 */ \
371{GPIO0_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_0}, /* GPIO23 EBC_HOLD_ACK DMA_REQ2 */ \
372{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_0}, /* GPIO24 EBC_EXT_REQ DMA_EOT2 IRQ(4) */ \
373{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_0}, /* GPIO25 EBC_EXT_ACK DMA_ACK3 IRQ(3) */ \
374{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO26 EBC_ADDR(5) DMA_EOT0 TS(3) */ \
375{GPIO0_BASE, GPIO_IN, GPIO_SEL , GPIO_OUT_0}, /* GPIO27 EBC_BUS_REQ DMA_EOT3 IRQ(5) */ \
376{GPIO0_BASE, GPIO_IN, GPIO_SEL , GPIO_OUT_0}, /* GPIO28 */ \
Stefan Roese8be76092007-11-27 11:57:35 +0100377{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_0}, /* GPIO29 DMA_EOT1 IRQ(2) */ \
378{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_0}, /* GPIO30 DMA_REQ1 IRQ(1) */ \
379{GPIO0_BASE, GPIO_IN, GPIO_ALT2, GPIO_OUT_0}, /* GPIO31 DMA_ACK1 IRQ(0) */ \
Stefan Roeseecdcbd42007-11-16 14:00:59 +0100380} \
381}
382
383#define CFG_GPIO_PCIE_RST 23
384#define CFG_GPIO_PCIE_CLKREQ 27
385#define CFG_GPIO_PCIE_WAKE 28
Stefan Roese211ea912007-10-22 07:34:34 +0200386
387/*
388 * Internal Definitions
389 *
390 * Boot Flags
391 */
392#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
393#define BOOTFLAG_WARM 0x02 /* Software reboot */
394
Stefan Roesebe88b162008-01-17 07:50:17 +0100395#if defined(CONFIG_CMD_KGDB)
Stefan Roese211ea912007-10-22 07:34:34 +0200396#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
397#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
398#endif
399
400/* pass open firmware flat tree */
401#define CONFIG_OF_LIBFDT 1
402#define CONFIG_OF_BOARD_SETUP 1
403
Stefan Roese211ea912007-10-22 07:34:34 +0200404#endif /* __CONFIG_H */