blob: 5b33c1ffcedda0cff658be4b15c26f99568eb3cf [file] [log] [blame]
Peter Tysera7c93102008-12-17 16:36:22 -06001/*
2 * Copyright 2008 Extreme Engineering Solutions, Inc.
3 *
4 * This program is free software; you can redistribute it and/or
5 * modify it under the terms of the GNU General Public License
6 * Version 2 as published by the Free Software Foundation.
7 *
8 * This program is distributed in the hope that it will be useful,
9 * but WITHOUT ANY WARRANTY; without even the implied warranty of
10 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
11 * GNU General Public License for more details.
12 *
13 * You should have received a copy of the GNU General Public License
14 * along with this program; if not, write to the Free Software
15 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
16 * MA 02111-1307 USA
17 */
18
19/*
20 * Driver for DS4510, a CPU supervisor with integrated EEPROM, SRAM,
21 * and 4 programmable non-volatile GPIO pins.
22 */
23
24#include <common.h>
25#include <i2c.h>
26#include <command.h>
27#include <ds4510.h>
28
29/* Default to an address that hopefully won't corrupt other i2c devices */
30#ifndef CONFIG_SYS_I2C_DS4510_ADDR
31#define CONFIG_SYS_I2C_DS4510_ADDR (~0)
32#endif
33
34enum {
35 DS4510_CMD_INFO,
36 DS4510_CMD_DEVICE,
37 DS4510_CMD_NV,
38 DS4510_CMD_RSTDELAY,
39 DS4510_CMD_OUTPUT,
40 DS4510_CMD_INPUT,
41 DS4510_CMD_PULLUP,
42 DS4510_CMD_EEPROM,
43 DS4510_CMD_SEEPROM,
44 DS4510_CMD_SRAM,
45};
46
47/*
48 * Write to DS4510, taking page boundaries into account
49 */
50int ds4510_mem_write(uint8_t chip, int offset, uint8_t *buf, int count)
51{
52 int wrlen;
53 int i = 0;
54
55 do {
56 wrlen = DS4510_EEPROM_PAGE_SIZE -
57 DS4510_EEPROM_PAGE_OFFSET(offset);
58 if (count < wrlen)
59 wrlen = count;
60 if (i2c_write(chip, offset, 1, &buf[i], wrlen))
61 return -1;
62
63 /*
64 * This delay isn't needed for SRAM writes but shouldn't delay
65 * things too much, so do it unconditionally for simplicity
66 */
67 udelay(DS4510_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
68 count -= wrlen;
69 offset += wrlen;
70 i += wrlen;
71 } while (count > 0);
72
73 return 0;
74}
75
76/*
77 * General read from DS4510
78 */
79int ds4510_mem_read(uint8_t chip, int offset, uint8_t *buf, int count)
80{
81 return i2c_read(chip, offset, 1, buf, count);
82}
83
84/*
85 * Write SEE bit in config register.
86 * nv = 0 - Writes to SEEPROM registers behave like EEPROM
87 * nv = 1 - Writes to SEEPROM registers behave like SRAM
88 */
89int ds4510_see_write(uint8_t chip, uint8_t nv)
90{
91 uint8_t data;
92
93 if (i2c_read(chip, DS4510_CFG, 1, &data, 1))
94 return -1;
95
96 if (nv) /* Treat SEEPROM bits as EEPROM */
97 data &= ~DS4510_CFG_SEE;
98 else /* Treat SEEPROM bits as SRAM */
99 data |= DS4510_CFG_SEE;
100
101 return ds4510_mem_write(chip, DS4510_CFG, &data, 1);
102}
103
104/*
105 * Write de-assertion of reset signal delay
106 */
107int ds4510_rstdelay_write(uint8_t chip, uint8_t delay)
108{
109 uint8_t data;
110
111 if (i2c_read(chip, DS4510_RSTDELAY, 1, &data, 1))
112 return -1;
113
114 data &= ~DS4510_RSTDELAY_MASK;
115 data |= delay & DS4510_RSTDELAY_MASK;
116
117 return ds4510_mem_write(chip, DS4510_RSTDELAY, &data, 1);
118}
119
120/*
121 * Write pullup characteristics of IO pins
122 */
123int ds4510_pullup_write(uint8_t chip, uint8_t val)
124{
125 val &= DS4510_IO_MASK;
126
127 return ds4510_mem_write(chip, DS4510_PULLUP, (uint8_t *)&val, 1);
128}
129
130/*
131 * Read pullup characteristics of IO pins
132 */
133int ds4510_pullup_read(uint8_t chip)
134{
135 uint8_t val;
136
137 if (i2c_read(chip, DS4510_PULLUP, 1, &val, 1))
138 return -1;
139
140 return val & DS4510_IO_MASK;
141}
142
143/*
144 * Write drive level of IO pins
145 */
146int ds4510_gpio_write(uint8_t chip, uint8_t val)
147{
148 uint8_t data;
149 int i;
150
151 for (i = 0; i < DS4510_NUM_IO; i++) {
152 if (i2c_read(chip, DS4510_IO0 - i, 1, &data, 1))
153 return -1;
154
155 if (val & (0x1 << i))
156 data |= 0x1;
157 else
158 data &= ~0x1;
159
160 if (ds4510_mem_write(chip, DS4510_IO0 - i, &data, 1))
161 return -1;
162 }
163
164 return 0;
165}
166
167/*
168 * Read drive level of IO pins
169 */
170int ds4510_gpio_read(uint8_t chip)
171{
172 uint8_t data;
173 int val = 0;
174 int i;
175
176 for (i = 0; i < DS4510_NUM_IO; i++) {
177 if (i2c_read(chip, DS4510_IO0 - i, 1, &data, 1))
178 return -1;
179
180 if (data & 1)
181 val |= (1 << i);
182 }
183
184 return val;
185}
186
187/*
188 * Read physical level of IO pins
189 */
190int ds4510_gpio_read_val(uint8_t chip)
191{
192 uint8_t val;
193
194 if (i2c_read(chip, DS4510_IO_STATUS, 1, &val, 1))
195 return -1;
196
197 return val & DS4510_IO_MASK;
198}
199
200#ifdef CONFIG_CMD_DS4510
201#ifdef CONFIG_CMD_DS4510_INFO
202/*
203 * Display DS4510 information
204 */
205static int ds4510_info(uint8_t chip)
206{
207 int i;
208 int tmp;
209 uint8_t data;
210
211 printf("DS4510 @ 0x%x:\n\n", chip);
212
213 if (i2c_read(chip, DS4510_RSTDELAY, 1, &data, 1))
214 return -1;
215 printf("rstdelay = 0x%x\n\n", data & DS4510_RSTDELAY_MASK);
216
217 if (i2c_read(chip, DS4510_CFG, 1, &data, 1))
218 return -1;
219 printf("config = 0x%x\n", data);
220 printf(" /ready = %d\n", data & DS4510_CFG_READY ? 1 : 0);
221 printf(" trip pt = %d\n", data & DS4510_CFG_TRIP_POINT ? 1 : 0);
222 printf(" rst sts = %d\n", data & DS4510_CFG_RESET ? 1 : 0);
223 printf(" /see = %d\n", data & DS4510_CFG_SEE ? 1 : 0);
224 printf(" swrst = %d\n\n", data & DS4510_CFG_SWRST ? 1 : 0);
225
226 printf("gpio pins: 3210\n");
227 printf("---------------\n");
228 printf("pullup ");
229
230 tmp = ds4510_pullup_read(chip);
231 if (tmp == -1)
232 return tmp;
233 for (i = DS4510_NUM_IO - 1; i >= 0; i--)
234 printf("%d", (tmp & (1 << i)) ? 1 : 0);
235 printf("\n");
236
237 printf("driven ");
238 tmp = ds4510_gpio_read(chip);
239 if (tmp == -1)
240 return -1;
241 for (i = DS4510_NUM_IO - 1; i >= 0; i--)
242 printf("%d", (tmp & (1 << i)) ? 1 : 0);
243 printf("\n");
244
245 printf("read ");
246 tmp = ds4510_gpio_read_val(chip);
247 if (tmp == -1)
248 return -1;
249 for (i = DS4510_NUM_IO - 1; i >= 0; i--)
250 printf("%d", (tmp & (1 << i)) ? 1 : 0);
251 printf("\n");
252
253 return 0;
254}
255#endif /* CONFIG_CMD_DS4510_INFO */
256
257cmd_tbl_t cmd_ds4510[] = {
258 U_BOOT_CMD_MKENT(device, 3, 0, (void *)DS4510_CMD_DEVICE, "", ""),
259 U_BOOT_CMD_MKENT(nv, 3, 0, (void *)DS4510_CMD_NV, "", ""),
260 U_BOOT_CMD_MKENT(output, 4, 0, (void *)DS4510_CMD_OUTPUT, "", ""),
261 U_BOOT_CMD_MKENT(input, 3, 0, (void *)DS4510_CMD_INPUT, "", ""),
262 U_BOOT_CMD_MKENT(pullup, 4, 0, (void *)DS4510_CMD_PULLUP, "", ""),
263#ifdef CONFIG_CMD_DS4510_INFO
264 U_BOOT_CMD_MKENT(info, 2, 0, (void *)DS4510_CMD_INFO, "", ""),
265#endif
266#ifdef CONFIG_CMD_DS4510_RST
267 U_BOOT_CMD_MKENT(rstdelay, 3, 0, (void *)DS4510_CMD_RSTDELAY, "", ""),
268#endif
269#ifdef CONFIG_CMD_DS4510_MEM
270 U_BOOT_CMD_MKENT(eeprom, 6, 0, (void *)DS4510_CMD_EEPROM, "", ""),
271 U_BOOT_CMD_MKENT(seeprom, 6, 0, (void *)DS4510_CMD_SEEPROM, "", ""),
272 U_BOOT_CMD_MKENT(sram, 6, 0, (void *)DS4510_CMD_SRAM, "", ""),
273#endif
274};
275
Wolfgang Denk54841ab2010-06-28 22:00:46 +0200276int do_ds4510(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
Peter Tysera7c93102008-12-17 16:36:22 -0600277{
278 static uint8_t chip = CONFIG_SYS_I2C_DS4510_ADDR;
279 cmd_tbl_t *c;
280 ulong ul_arg2 = 0;
281 ulong ul_arg3 = 0;
282 int tmp;
283#ifdef CONFIG_CMD_DS4510_MEM
284 ulong addr;
285 ulong off;
286 ulong cnt;
287 int end;
288 int (*rw_func)(uint8_t, int, uint8_t *, int);
289#endif
290
291 c = find_cmd_tbl(argv[1], cmd_ds4510, ARRAY_SIZE(cmd_ds4510));
292
293 /* All commands but "device" require 'maxargs' arguments */
294 if (!c || !((argc == (c->maxargs)) ||
295 (((int)c->cmd == DS4510_CMD_DEVICE) &&
296 (argc == (c->maxargs - 1))))) {
Peter Tyser62c3ae72009-01-27 18:03:10 -0600297 cmd_usage(cmdtp);
Peter Tysera7c93102008-12-17 16:36:22 -0600298 return 1;
299 }
300
301 /* arg2 used as chip addr and pin number */
302 if (argc > 2)
303 ul_arg2 = simple_strtoul(argv[2], NULL, 16);
304
305 /* arg3 used as output/pullup value */
306 if (argc > 3)
307 ul_arg3 = simple_strtoul(argv[3], NULL, 16);
308
309 switch ((int)c->cmd) {
310 case DS4510_CMD_DEVICE:
311 if (argc == 3)
312 chip = ul_arg2;
313 printf("Current device address: 0x%x\n", chip);
314 return 0;
315 case DS4510_CMD_NV:
316 return ds4510_see_write(chip, ul_arg2);
317 case DS4510_CMD_OUTPUT:
318 tmp = ds4510_gpio_read(chip);
319 if (tmp == -1)
320 return -1;
321 if (ul_arg3)
322 tmp |= (1 << ul_arg2);
323 else
324 tmp &= ~(1 << ul_arg2);
325 return ds4510_gpio_write(chip, tmp);
326 case DS4510_CMD_INPUT:
327 tmp = ds4510_gpio_read_val(chip);
328 if (tmp == -1)
329 return -1;
330 return (tmp & (1 << ul_arg2)) != 0;
331 case DS4510_CMD_PULLUP:
332 tmp = ds4510_pullup_read(chip);
333 if (tmp == -1)
334 return -1;
335 if (ul_arg3)
336 tmp |= (1 << ul_arg2);
337 else
338 tmp &= ~(1 << ul_arg2);
339 return ds4510_pullup_write(chip, tmp);
340#ifdef CONFIG_CMD_DS4510_INFO
341 case DS4510_CMD_INFO:
342 return ds4510_info(chip);
343#endif
344#ifdef CONFIG_CMD_DS4510_RST
345 case DS4510_CMD_RSTDELAY:
346 return ds4510_rstdelay_write(chip, ul_arg2);
347#endif
348#ifdef CONFIG_CMD_DS4510_MEM
349 case DS4510_CMD_EEPROM:
350 end = DS4510_EEPROM + DS4510_EEPROM_SIZE;
351 off = DS4510_EEPROM;
352 break;
353 case DS4510_CMD_SEEPROM:
354 end = DS4510_SEEPROM + DS4510_SEEPROM_SIZE;
355 off = DS4510_SEEPROM;
356 break;
357 case DS4510_CMD_SRAM:
358 end = DS4510_SRAM + DS4510_SRAM_SIZE;
359 off = DS4510_SRAM;
360 break;
361#endif
362 default:
363 /* We should never get here... */
364 return 1;
365 }
366
367#ifdef CONFIG_CMD_DS4510_MEM
368 /* Only eeprom, seeprom, and sram commands should make it here */
369 if (strcmp(argv[2], "read") == 0) {
370 rw_func = ds4510_mem_read;
371 } else if (strcmp(argv[2], "write") == 0) {
372 rw_func = ds4510_mem_write;
373 } else {
Peter Tyser62c3ae72009-01-27 18:03:10 -0600374 cmd_usage(cmdtp);
Peter Tysera7c93102008-12-17 16:36:22 -0600375 return 1;
376 }
377
378 addr = simple_strtoul(argv[3], NULL, 16);
379 off += simple_strtoul(argv[4], NULL, 16);
380 cnt = simple_strtoul(argv[5], NULL, 16);
381
382 if ((off + cnt) > end) {
383 printf("ERROR: invalid len\n");
384 return -1;
385 }
386
387 return rw_func(chip, off, (uint8_t *)addr, cnt);
388#endif
389}
390
391U_BOOT_CMD(
392 ds4510, 6, 1, do_ds4510,
Peter Tyser2fb26042009-01-27 18:03:12 -0600393 "ds4510 eeprom/seeprom/sram/gpio access",
Peter Tysera7c93102008-12-17 16:36:22 -0600394 "device [dev]\n"
395 " - show or set current device address\n"
396#ifdef CONFIG_CMD_DS4510_INFO
397 "ds4510 info\n"
398 " - display ds4510 info\n"
399#endif
400 "ds4510 output pin 0|1\n"
401 " - set pin low or high-Z\n"
402 "ds4510 input pin\n"
403 " - read value of pin\n"
404 "ds4510 pullup pin 0|1\n"
405 " - disable/enable pullup on specified pin\n"
406 "ds4510 nv 0|1\n"
Wolfgang Denka89c33d2009-05-24 17:06:54 +0200407 " - make gpio and seeprom writes volatile/non-volatile"
Peter Tysera7c93102008-12-17 16:36:22 -0600408#ifdef CONFIG_CMD_DS4510_RST
Wolfgang Denka89c33d2009-05-24 17:06:54 +0200409 "\n"
Peter Tysera7c93102008-12-17 16:36:22 -0600410 "ds4510 rstdelay 0-3\n"
Wolfgang Denka89c33d2009-05-24 17:06:54 +0200411 " - set reset output delay"
Peter Tysera7c93102008-12-17 16:36:22 -0600412#endif
413#ifdef CONFIG_CMD_DS4510_MEM
Wolfgang Denka89c33d2009-05-24 17:06:54 +0200414 "\n"
Peter Tysera7c93102008-12-17 16:36:22 -0600415 "ds4510 eeprom read addr off cnt\n"
416 "ds4510 eeprom write addr off cnt\n"
417 " - read/write 'cnt' bytes at EEPROM offset 'off'\n"
418 "ds4510 seeprom read addr off cnt\n"
419 "ds4510 seeprom write addr off cnt\n"
420 " - read/write 'cnt' bytes at SRAM-shadowed EEPROM offset 'off'\n"
421 "ds4510 sram read addr off cnt\n"
422 "ds4510 sram write addr off cnt\n"
Wolfgang Denka89c33d2009-05-24 17:06:54 +0200423 " - read/write 'cnt' bytes at SRAM offset 'off'"
Peter Tysera7c93102008-12-17 16:36:22 -0600424#endif
425);
426#endif /* CONFIG_CMD_DS4510 */