Convert CONFIG_BOOTCOUNT_RAM to Kconfig
This converts the following to Kconfig:
CONFIG_BOOTCOUNT_RAM
Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
diff --git a/README b/README
index 4478bad..5ab683d 100644
--- a/README
+++ b/README
@@ -2270,8 +2270,6 @@
- bootcount support:
CONFIG_AT91SAM9XE
enable special bootcounter support on at91sam9xe based boards.
- CONFIG_BOOTCOUNT_RAM
- enable support for the bootcounter in RAM
CONFIG_BOOTCOUNT_I2C
enable support for the bootcounter on an i2c (like RTC) device.
CONFIG_SYS_I2C_RTC_ADDR = i2c chip address
diff --git a/configs/km_kirkwood_128m16_defconfig b/configs/km_kirkwood_128m16_defconfig
index 3c7709d..653dc92 100644
--- a/configs/km_kirkwood_128m16_defconfig
+++ b/configs/km_kirkwood_128m16_defconfig
@@ -30,6 +30,7 @@
CONFIG_BOOTP_GATEWAY=y
CONFIG_BOOTP_HOSTNAME=y
CONFIG_BOOTCOUNT_LIMIT=y
+CONFIG_BOOTCOUNT_RAM=y
# CONFIG_MMC is not set
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_STMICRO=y
diff --git a/configs/km_kirkwood_defconfig b/configs/km_kirkwood_defconfig
index 04513a4..0a55ed4 100644
--- a/configs/km_kirkwood_defconfig
+++ b/configs/km_kirkwood_defconfig
@@ -30,6 +30,7 @@
CONFIG_BOOTP_GATEWAY=y
CONFIG_BOOTP_HOSTNAME=y
CONFIG_BOOTCOUNT_LIMIT=y
+CONFIG_BOOTCOUNT_RAM=y
# CONFIG_MMC is not set
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_STMICRO=y
diff --git a/configs/km_kirkwood_pci_defconfig b/configs/km_kirkwood_pci_defconfig
index 1e8f511..dba9eb7 100644
--- a/configs/km_kirkwood_pci_defconfig
+++ b/configs/km_kirkwood_pci_defconfig
@@ -30,6 +30,7 @@
CONFIG_BOOTP_GATEWAY=y
CONFIG_BOOTP_HOSTNAME=y
CONFIG_BOOTCOUNT_LIMIT=y
+CONFIG_BOOTCOUNT_RAM=y
# CONFIG_MMC is not set
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_STMICRO=y
diff --git a/configs/kmcoge5un_defconfig b/configs/kmcoge5un_defconfig
index c7c0021..63654c3 100644
--- a/configs/kmcoge5un_defconfig
+++ b/configs/kmcoge5un_defconfig
@@ -30,6 +30,7 @@
CONFIG_BOOTP_GATEWAY=y
CONFIG_BOOTP_HOSTNAME=y
CONFIG_BOOTCOUNT_LIMIT=y
+CONFIG_BOOTCOUNT_RAM=y
# CONFIG_MMC is not set
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_STMICRO=y
diff --git a/configs/kmnusa_defconfig b/configs/kmnusa_defconfig
index 960ca12..0dd3201 100644
--- a/configs/kmnusa_defconfig
+++ b/configs/kmnusa_defconfig
@@ -30,6 +30,7 @@
CONFIG_BOOTP_GATEWAY=y
CONFIG_BOOTP_HOSTNAME=y
CONFIG_BOOTCOUNT_LIMIT=y
+CONFIG_BOOTCOUNT_RAM=y
# CONFIG_MMC is not set
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_STMICRO=y
diff --git a/configs/kmsugp1_defconfig b/configs/kmsugp1_defconfig
index d5d5cd7..ed6540f 100644
--- a/configs/kmsugp1_defconfig
+++ b/configs/kmsugp1_defconfig
@@ -30,6 +30,7 @@
CONFIG_BOOTP_GATEWAY=y
CONFIG_BOOTP_HOSTNAME=y
CONFIG_BOOTCOUNT_LIMIT=y
+CONFIG_BOOTCOUNT_RAM=y
# CONFIG_MMC is not set
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_STMICRO=y
diff --git a/configs/kmsuv31_defconfig b/configs/kmsuv31_defconfig
index 33335cd..b662077 100644
--- a/configs/kmsuv31_defconfig
+++ b/configs/kmsuv31_defconfig
@@ -30,6 +30,7 @@
CONFIG_BOOTP_GATEWAY=y
CONFIG_BOOTP_HOSTNAME=y
CONFIG_BOOTCOUNT_LIMIT=y
+CONFIG_BOOTCOUNT_RAM=y
# CONFIG_MMC is not set
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_STMICRO=y
diff --git a/configs/mgcoge3un_defconfig b/configs/mgcoge3un_defconfig
index 5c0946a..6a96b62 100644
--- a/configs/mgcoge3un_defconfig
+++ b/configs/mgcoge3un_defconfig
@@ -30,6 +30,7 @@
CONFIG_BOOTP_GATEWAY=y
CONFIG_BOOTP_HOSTNAME=y
CONFIG_BOOTCOUNT_LIMIT=y
+CONFIG_BOOTCOUNT_RAM=y
# CONFIG_MMC is not set
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_STMICRO=y
diff --git a/configs/portl2_defconfig b/configs/portl2_defconfig
index e3cf637..6dc270a 100644
--- a/configs/portl2_defconfig
+++ b/configs/portl2_defconfig
@@ -30,6 +30,7 @@
CONFIG_BOOTP_GATEWAY=y
CONFIG_BOOTP_HOSTNAME=y
CONFIG_BOOTCOUNT_LIMIT=y
+CONFIG_BOOTCOUNT_RAM=y
# CONFIG_MMC is not set
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_STMICRO=y
diff --git a/configs/theadorable_debug_defconfig b/configs/theadorable_debug_defconfig
index aa6e5e1..918447a 100644
--- a/configs/theadorable_debug_defconfig
+++ b/configs/theadorable_debug_defconfig
@@ -45,6 +45,7 @@
CONFIG_SPL_OF_TRANSLATE=y
CONFIG_SATA_MV=y
CONFIG_BOOTCOUNT_LIMIT=y
+CONFIG_BOOTCOUNT_RAM=y
CONFIG_FPGA_ALTERA=y
CONFIG_DM_GPIO=y
# CONFIG_MMC is not set
diff --git a/drivers/bootcount/Kconfig b/drivers/bootcount/Kconfig
index 40a0755..eabfd13 100644
--- a/drivers/bootcount/Kconfig
+++ b/drivers/bootcount/Kconfig
@@ -40,6 +40,12 @@
So the Userspace Application must set the "upgrade_available"
and "bootcount" variable to 0, if a boot was successfully.
+config BOOTCOUNT_RAM
+ bool "Boot counter in RAM"
+ help
+ Store the bootcount in DRAM protected against against bit errors
+ due to short power loss or holding a system in RESET.
+
endchoice
config SYS_BOOTCOUNT_SINGLEWORD
diff --git a/include/configs/km/km_arm.h b/include/configs/km/km_arm.h
index faa3d94..cc36a68 100644
--- a/include/configs/km/km_arm.h
+++ b/include/configs/km/km_arm.h
@@ -276,8 +276,6 @@
#define CONFIG_KM_RESERVED_PRAM 0x801000
/* address for the bootcount (taken from end of RAM) */
#define BOOTCOUNT_ADDR (CONFIG_KM_RESERVED_PRAM)
-/* Use generic bootcount RAM driver */
-#define CONFIG_BOOTCOUNT_RAM
/* enable POST tests */
#define CONFIG_POST (CONFIG_SYS_POST_MEM_REGIONS)
diff --git a/include/configs/theadorable.h b/include/configs/theadorable.h
index a213e7e..e4ec2c0 100644
--- a/include/configs/theadorable.h
+++ b/include/configs/theadorable.h
@@ -82,7 +82,6 @@
/*
* Bootcounter
*/
-#define CONFIG_BOOTCOUNT_RAM
/* Max size of RAM minus BOOTCOUNT_ADDR is the bootcounter address */
#define BOOTCOUNT_ADDR 0x1000
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index 80a3876..deb3c0c 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -147,7 +147,6 @@
CONFIG_BOOTBLOCK
CONFIG_BOOTCOUNT_ALEN
CONFIG_BOOTCOUNT_I2C
-CONFIG_BOOTCOUNT_RAM
CONFIG_BOOTFILE
CONFIG_BOOTMAPSZ
CONFIG_BOOTMODE