mpc83xx: Add support for MPC83xx PCI-E controllers
This patch adds support for MPC83xx PCI-E controllers in Root Complex
mode.
The patch is based on Tony Li and Dave Liu work[1].
Though unlike the original patch, by default we don't register PCI-E
buses for use in U-Boot, we only configure the controllers for future
use in other OSes (Linux). This is done because we don't have enough
of spare BATs to map all the PCI-E regions.
To actually use PCI-E in U-Boot, users should explicitly define
CONFIG_83XX_GENERIC_PCIE_REGISTER_HOSES symbol in the board file. And
only then U-Boot will able to access PCI-E, but at the cost of disabled
address translation.
[1] http://lists.denx.de/pipermail/u-boot/2008-January/027630.html
Signed-off-by: Tony Li <tony.li@freescale.com>
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
diff --git a/cpu/mpc83xx/Makefile b/cpu/mpc83xx/Makefile
index fcb6a52..dd35e6b 100644
--- a/cpu/mpc83xx/Makefile
+++ b/cpu/mpc83xx/Makefile
@@ -39,6 +39,7 @@
COBJS-$(CONFIG_QE) += qe_io.o
COBJS-$(CONFIG_FSL_SERDES) += serdes.o
COBJS-$(CONFIG_83XX_GENERIC_PCI) += pci.o
+COBJS-$(CONFIG_83XX_GENERIC_PCIE) += pcie.o
COBJS-$(CONFIG_OF_LIBFDT) += fdt.o
COBJS := $(COBJS-y)
diff --git a/cpu/mpc83xx/pcie.c b/cpu/mpc83xx/pcie.c
new file mode 100644
index 0000000..02150ba
--- /dev/null
+++ b/cpu/mpc83xx/pcie.c
@@ -0,0 +1,314 @@
+/*
+ * Copyright (C) 2007-2009 Freescale Semiconductor, Inc.
+ * Copyright (C) 2008-2009 MontaVista Software, Inc.
+ *
+ * Authors: Tony Li <tony.li@freescale.com>
+ * Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <pci.h>
+#include <mpc83xx.h>
+#include <asm/io.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define PCIE_MAX_BUSES 2
+
+#ifdef CONFIG_83XX_GENERIC_PCIE_REGISTER_HOSES
+
+static int mpc83xx_pcie_remap_cfg(struct pci_controller *hose, pci_dev_t dev)
+{
+ int bus = PCI_BUS(dev) - hose->first_busno;
+ immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
+ pex83xx_t *pex = &immr->pciexp[bus];
+ struct pex_outbound_window *out_win = &pex->bridge.pex_outbound_win[0];
+ u8 devfn = PCI_DEV(dev) << 3 | PCI_FUNC(dev);
+ u32 dev_base = bus << 24 | devfn << 16;
+
+ if (hose->indirect_type == INDIRECT_TYPE_NO_PCIE_LINK)
+ return -1;
+ /*
+ * Workaround for the HW bug: for Type 0 configure transactions the
+ * PCI-E controller does not check the device number bits and just
+ * assumes that the device number bits are 0.
+ */
+ if (devfn & 0xf8)
+ return -1;
+
+ out_le32(&out_win->tarl, dev_base);
+ return 0;
+}
+
+#define cfg_read(val, addr, type, op) \
+ do { *val = op((type)(addr)); } while (0)
+#define cfg_write(val, addr, type, op) \
+ do { op((type *)(addr), (val)); } while (0)
+
+#define PCIE_OP(rw, size, type, op) \
+static int pcie_##rw##_config_##size(struct pci_controller *hose, \
+ pci_dev_t dev, int offset, \
+ type val) \
+{ \
+ int ret; \
+ \
+ ret = mpc83xx_pcie_remap_cfg(hose, dev); \
+ if (ret) \
+ return ret; \
+ cfg_##rw(val, (void *)hose->cfg_addr + offset, type, op); \
+ return 0; \
+}
+
+PCIE_OP(read, byte, u8 *, in_8)
+PCIE_OP(read, word, u16 *, in_le16)
+PCIE_OP(read, dword, u32 *, in_le32)
+PCIE_OP(write, byte, u8, out_8)
+PCIE_OP(write, word, u16, out_le16)
+PCIE_OP(write, dword, u32, out_le32)
+
+static void mpc83xx_pcie_register_hose(int bus, struct pci_region *reg,
+ u8 link)
+{
+ extern void disable_addr_trans(void); /* start.S */
+ static struct pci_controller pcie_hose[PCIE_MAX_BUSES];
+ static int max_bus;
+ struct pci_controller *hose = &pcie_hose[bus];
+ int i;
+
+ /*
+ * There are no spare BATs to remap all PCI-E windows for U-Boot, so
+ * disable translations. In general, this is not great solution, and
+ * that's why we don't register PCI-E hoses by default.
+ */
+ disable_addr_trans();
+
+ for (i = 0; i < 2; i++, reg++) {
+ if (reg->size == 0)
+ break;
+
+ hose->regions[i] = *reg;
+ hose->region_count++;
+ }
+
+ i = hose->region_count++;
+ hose->regions[i].bus_start = 0;
+ hose->regions[i].phys_start = 0;
+ hose->regions[i].size = gd->ram_size;
+ hose->regions[i].flags = PCI_REGION_MEM | PCI_REGION_MEMORY;
+
+ i = hose->region_count++;
+ hose->regions[i].bus_start = CONFIG_SYS_IMMR;
+ hose->regions[i].phys_start = CONFIG_SYS_IMMR;
+ hose->regions[i].size = 0x100000;
+ hose->regions[i].flags = PCI_REGION_MEM | PCI_REGION_MEMORY;
+
+ hose->first_busno = max_bus;
+ hose->last_busno = 0xff;
+
+ if (bus == 0)
+ hose->cfg_addr = (unsigned int *)CONFIG_SYS_PCIE1_CFG_BASE;
+ else
+ hose->cfg_addr = (unsigned int *)CONFIG_SYS_PCIE2_CFG_BASE;
+
+ pci_set_ops(hose,
+ pcie_read_config_byte,
+ pcie_read_config_word,
+ pcie_read_config_dword,
+ pcie_write_config_byte,
+ pcie_write_config_word,
+ pcie_write_config_dword);
+
+ if (!link)
+ hose->indirect_type = INDIRECT_TYPE_NO_PCIE_LINK;
+
+ pci_register_hose(hose);
+
+#ifdef CONFIG_PCI_SCAN_SHOW
+ printf("PCI: Bus Dev VenId DevId Class Int\n");
+#endif
+ /*
+ * Hose scan.
+ */
+ hose->last_busno = pci_hose_scan(hose);
+ max_bus = hose->last_busno + 1;
+}
+
+#else
+
+static void mpc83xx_pcie_register_hose(int bus, struct pci_region *reg,
+ u8 link) {}
+
+#endif /* CONFIG_83XX_GENERIC_PCIE_REGISTER_HOSES */
+
+static void mpc83xx_pcie_init_bus(int bus, struct pci_region *reg)
+{
+ immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
+ pex83xx_t *pex = &immr->pciexp[bus];
+ struct pex_outbound_window *out_win;
+ struct pex_inbound_window *in_win;
+ void *hose_cfg_base;
+ unsigned int ram_sz;
+ unsigned int barl;
+ unsigned int tar;
+ u16 reg16;
+ int i;
+
+ /* Enable pex csb bridge inbound & outbound transactions */
+ out_le32(&pex->bridge.pex_csb_ctrl,
+ in_le32(&pex->bridge.pex_csb_ctrl) | PEX_CSB_CTRL_OBPIOE |
+ PEX_CSB_CTRL_IBPIOE);
+
+ /* Enable bridge outbound */
+ out_le32(&pex->bridge.pex_csb_obctrl, PEX_CSB_OBCTRL_PIOE |
+ PEX_CSB_OBCTRL_MEMWE | PEX_CSB_OBCTRL_IOWE |
+ PEX_CSB_OBCTRL_CFGWE);
+
+ out_win = &pex->bridge.pex_outbound_win[0];
+ if (bus) {
+ out_le32(&out_win->ar, PEX_OWAR_EN | PEX_OWAR_TYPE_CFG |
+ CONFIG_SYS_PCIE2_CFG_SIZE);
+ out_le32(&out_win->bar, CONFIG_SYS_PCIE2_CFG_BASE);
+ } else {
+ out_le32(&out_win->ar, PEX_OWAR_EN | PEX_OWAR_TYPE_CFG |
+ CONFIG_SYS_PCIE1_CFG_SIZE);
+ out_le32(&out_win->bar, CONFIG_SYS_PCIE1_CFG_BASE);
+ }
+ out_le32(&out_win->tarl, 0);
+ out_le32(&out_win->tarh, 0);
+
+ for (i = 0; i < 2; i++, reg++) {
+ u32 ar;
+
+ if (reg->size == 0)
+ break;
+
+ out_win = &pex->bridge.pex_outbound_win[i + 1];
+ out_le32(&out_win->bar, reg->phys_start);
+ out_le32(&out_win->tarl, reg->bus_start);
+ out_le32(&out_win->tarh, 0);
+ ar = PEX_OWAR_EN | (reg->size & PEX_OWAR_SIZE);
+ if (reg->flags & PCI_REGION_IO)
+ ar |= PEX_OWAR_TYPE_IO;
+ else
+ ar |= PEX_OWAR_TYPE_MEM;
+ out_le32(&out_win->ar, ar);
+ }
+
+ out_le32(&pex->bridge.pex_csb_ibctrl, PEX_CSB_IBCTRL_PIOE);
+
+ ram_sz = gd->ram_size;
+ barl = 0;
+ tar = 0;
+ i = 0;
+ while (ram_sz > 0) {
+ in_win = &pex->bridge.pex_inbound_win[i];
+ out_le32(&in_win->barl, barl);
+ out_le32(&in_win->barh, 0x0);
+ out_le32(&in_win->tar, tar);
+ if (ram_sz >= 0x10000000) {
+ /* The maxium windows size is 256M */
+ out_le32(&in_win->ar, PEX_IWAR_EN | PEX_IWAR_NSOV |
+ PEX_IWAR_TYPE_PF | 0x0FFFF000);
+ barl += 0x10000000;
+ tar += 0x10000000;
+ ram_sz -= 0x10000000;
+ } else {
+ /* The UM is not clear here.
+ * So, round up to even Mb boundary */
+
+ ram_sz = ram_sz >> (20 +
+ ((ram_sz & 0xFFFFF) ? 1 : 0));
+ if (!(ram_sz % 2))
+ ram_sz -= 1;
+ out_le32(&in_win->ar, PEX_IWAR_EN | PEX_IWAR_NSOV |
+ PEX_IWAR_TYPE_PF | (ram_sz << 20) | 0xFF000);
+ ram_sz = 0;
+ }
+ i++;
+ }
+
+ in_win = &pex->bridge.pex_inbound_win[i];
+ out_le32(&in_win->barl, CONFIG_SYS_IMMR);
+ out_le32(&in_win->barh, 0);
+ out_le32(&in_win->tar, CONFIG_SYS_IMMR);
+ out_le32(&in_win->ar, PEX_IWAR_EN |
+ PEX_IWAR_TYPE_NO_PF | PEX_IWAR_SIZE_1M);
+
+ /* Enable the host virtual INTX interrupts */
+ out_le32(&pex->bridge.pex_int_axi_misc_enb,
+ in_le32(&pex->bridge.pex_int_axi_misc_enb) | 0x1E0);
+
+ /* Hose configure header is memory-mapped */
+ hose_cfg_base = (void *)pex;
+
+ get_clocks();
+ /* Configure the PCIE controller core clock ratio */
+ out_le32(hose_cfg_base + PEX_GCLK_RATIO,
+ (((bus ? gd->pciexp2_clk : gd->pciexp1_clk) / 1000000) * 16)
+ / 333);
+ udelay(1000000);
+
+ /* Do Type 1 bridge configuration */
+ out_8(hose_cfg_base + PCI_PRIMARY_BUS, 0);
+ out_8(hose_cfg_base + PCI_SECONDARY_BUS, 1);
+ out_8(hose_cfg_base + PCI_SUBORDINATE_BUS, 255);
+
+ /*
+ * Write to Command register
+ */
+ reg16 = in_le16(hose_cfg_base + PCI_COMMAND);
+ reg16 |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY | PCI_COMMAND_IO |
+ PCI_COMMAND_SERR | PCI_COMMAND_PARITY;
+ out_le16(hose_cfg_base + PCI_COMMAND, reg16);
+
+ /*
+ * Clear non-reserved bits in status register.
+ */
+ out_le16(hose_cfg_base + PCI_STATUS, 0xffff);
+ out_8(hose_cfg_base + PCI_LATENCY_TIMER, 0x80);
+ out_8(hose_cfg_base + PCI_CACHE_LINE_SIZE, 0x08);
+
+ printf("PCIE%d: ", bus);
+
+ reg16 = in_le16(hose_cfg_base + PCI_LTSSM);
+ if (reg16 >= PCI_LTSSM_L0)
+ printf("link\n");
+ else
+ printf("No link\n");
+
+ mpc83xx_pcie_register_hose(bus, reg, reg16 >= PCI_LTSSM_L0);
+}
+
+/*
+ * The caller must have already set SCCR, SERDES and the PCIE_LAW BARs
+ * must have been set to cover all of the requested regions.
+ */
+void mpc83xx_pcie_init(int num_buses, struct pci_region **reg, int warmboot)
+{
+ int i;
+
+ /*
+ * Release PCI RST Output signal.
+ * Power on to RST high must be at least 100 ms as per PCI spec.
+ * On warm boots only 1 ms is required.
+ */
+ udelay(warmboot ? 1000 : 100000);
+
+ for (i = 0; i < num_buses; i++)
+ mpc83xx_pcie_init_bus(i, reg[i]);
+}
diff --git a/cpu/mpc83xx/speed.c b/cpu/mpc83xx/speed.c
index bf9bf36..4230099 100644
--- a/cpu/mpc83xx/speed.c
+++ b/cpu/mpc83xx/speed.c
@@ -132,7 +132,7 @@
u32 qe_clk;
u32 brg_clk;
#endif
-#if defined(CONFIG_MPC837X)
+#if defined(CONFIG_MPC837X) || defined(CONFIG_MPC831X)
u32 pciexp1_clk;
u32 pciexp2_clk;
#endif
@@ -328,7 +328,7 @@
i2c2_clk = csb_clk; /* i2c-2 clk is equal to csb clk */
#endif
-#if defined(CONFIG_MPC837X)
+#if defined(CONFIG_MPC837X) || defined(CONFIG_MPC831X)
switch ((sccr & SCCR_PCIEXP1CM) >> SCCR_PCIEXP1CM_SHIFT) {
case 0:
pciexp1_clk = 0;
diff --git a/include/asm-ppc/global_data.h b/include/asm-ppc/global_data.h
index 2bb50b4..e5a3b2c 100644
--- a/include/asm-ppc/global_data.h
+++ b/include/asm-ppc/global_data.h
@@ -75,7 +75,7 @@
u32 lbiu_clk;
u32 lclk_clk;
u32 pci_clk;
-#if defined(CONFIG_MPC837X)
+#if defined(CONFIG_MPC837X) || defined(CONFIG_MPC831X)
u32 pciexp1_clk;
u32 pciexp2_clk;
#endif
diff --git a/include/asm-ppc/immap_83xx.h b/include/asm-ppc/immap_83xx.h
index df24a6e..77c09db 100644
--- a/include/asm-ppc/immap_83xx.h
+++ b/include/asm-ppc/immap_83xx.h
@@ -52,23 +52,28 @@
law83xx_t lblaw[4]; /* LBIU local access window */
u8 res2[0x20];
law83xx_t pcilaw[2]; /* PCI local access window */
- u8 res3[0x30];
+ u8 res3[0x10];
+ law83xx_t pcielaw[2]; /* PCI Express local access window */
+ u8 res4[0x10];
law83xx_t ddrlaw[2]; /* DDR local access window */
- u8 res4[0x50];
+ u8 res5[0x50];
u32 sgprl; /* System General Purpose Register Low */
u32 sgprh; /* System General Purpose Register High */
u32 spridr; /* System Part and Revision ID Register */
- u8 res5[0x04];
+ u8 res6[0x04];
u32 spcr; /* System Priority Configuration Register */
u32 sicrl; /* System I/O Configuration Register Low */
u32 sicrh; /* System I/O Configuration Register High */
- u8 res6[0x04];
+ u8 res7[0x04];
u32 sidcr0; /* System I/O Delay Configuration Register 0 */
u32 sidcr1; /* System I/O Delay Configuration Register 1 */
u32 ddrcdr; /* DDR Control Driver Register */
u32 ddrdsr; /* DDR Debug Status Register */
u32 obir; /* Output Buffer Impedance Register */
- u8 res7[0xCC];
+ u8 res8[0xC];
+ u32 pecr1; /* PCI Express control register 1 */
+ u32 pecr2; /* PCI Express control register 2 */
+ u8 res9[0xB8];
} sysconf83xx_t;
/*
@@ -503,8 +508,110 @@
/*
* PCI Express
*/
+struct pex_inbound_window {
+ u32 ar;
+ u32 tar;
+ u32 barl;
+ u32 barh;
+};
+
+struct pex_outbound_window {
+ u32 ar;
+ u32 bar;
+ u32 tarl;
+ u32 tarh;
+};
+
+struct pex_csb_bridge {
+ u32 pex_csb_ver;
+ u32 pex_csb_cab;
+ u32 pex_csb_ctrl;
+ u8 res0[8];
+ u32 pex_dms_dstmr;
+ u8 res1[4];
+ u32 pex_cbs_stat;
+ u8 res2[0x20];
+ u32 pex_csb_obctrl;
+ u32 pex_csb_obstat;
+ u8 res3[0x98];
+ u32 pex_csb_ibctrl;
+ u32 pex_csb_ibstat;
+ u8 res4[0xb8];
+ u32 pex_wdma_ctrl;
+ u32 pex_wdma_addr;
+ u32 pex_wdma_stat;
+ u8 res5[0x94];
+ u32 pex_rdma_ctrl;
+ u32 pex_rdma_addr;
+ u32 pex_rdma_stat;
+ u8 res6[0xd4];
+ u32 pex_ombcr;
+ u32 pex_ombdr;
+ u8 res7[0x38];
+ u32 pex_imbcr;
+ u32 pex_imbdr;
+ u8 res8[0x38];
+ u32 pex_int_enb;
+ u32 pex_int_stat;
+ u32 pex_int_apio_vec1;
+ u32 pex_int_apio_vec2;
+ u8 res9[0x10];
+ u32 pex_int_ppio_vec1;
+ u32 pex_int_ppio_vec2;
+ u32 pex_int_wdma_vec1;
+ u32 pex_int_wdma_vec2;
+ u32 pex_int_rdma_vec1;
+ u32 pex_int_rdma_vec2;
+ u32 pex_int_misc_vec;
+ u8 res10[4];
+ u32 pex_int_axi_pio_enb;
+ u32 pex_int_axi_wdma_enb;
+ u32 pex_int_axi_rdma_enb;
+ u32 pex_int_axi_misc_enb;
+ u32 pex_int_axi_pio_stat;
+ u32 pex_int_axi_wdma_stat;
+ u32 pex_int_axi_rdma_stat;
+ u32 pex_int_axi_misc_stat;
+ u8 res11[0xa0];
+ struct pex_outbound_window pex_outbound_win[4];
+ u8 res12[0x100];
+ u32 pex_epiwtar0;
+ u32 pex_epiwtar1;
+ u32 pex_epiwtar2;
+ u32 pex_epiwtar3;
+ u8 res13[0x70];
+ struct pex_inbound_window pex_inbound_win[4];
+};
+
typedef struct pex83xx {
- u8 fixme[0x1000];
+ u8 pex_cfg_header[0x404];
+ u32 pex_ltssm_stat;
+ u8 res0[0x30];
+ u32 pex_ack_replay_timeout;
+ u8 res1[4];
+ u32 pex_gclk_ratio;
+ u8 res2[0xc];
+ u32 pex_pm_timer;
+ u32 pex_pme_timeout;
+ u8 res3[4];
+ u32 pex_aspm_req_timer;
+ u8 res4[0x18];
+ u32 pex_ssvid_update;
+ u8 res5[0x34];
+ u32 pex_cfg_ready;
+ u8 res6[0x24];
+ u32 pex_bar_sizel;
+ u8 res7[4];
+ u32 pex_bar_sel;
+ u8 res8[0x20];
+ u32 pex_bar_pf;
+ u8 res9[0x88];
+ u32 pex_pme_to_ack_tor;
+ u8 res10[0xc];
+ u32 pex_ss_intr_mask;
+ u8 res11[0x25c];
+ struct pex_csb_bridge bridge;
+ u8 res12[0x160];
} pex83xx_t;
/*
diff --git a/include/mpc83xx.h b/include/mpc83xx.h
index e5dfe3f..191488a 100644
--- a/include/mpc83xx.h
+++ b/include/mpc83xx.h
@@ -751,9 +751,6 @@
#define SCCR_USBDRCM_2 0x00800000
#define SCCR_USBDRCM_3 0x00c00000
-#define SCCR_PCIEXP1CM 0x00300000
-#define SCCR_PCIEXP2CM 0x000c0000
-
#define SCCR_SATA1CM 0x00003000
#define SCCR_SATA1CM_SHIFT 12
#define SCCR_SATACM 0x00003c00
@@ -800,6 +797,17 @@
#define SCCR_USBDRCM_2 0x00800000
#define SCCR_USBDRCM_3 0x00c00000
+/* All of the four SATA controllers must have the same clock ratio */
+#define SCCR_SATA1CM 0x000000c0
+#define SCCR_SATA1CM_SHIFT 6
+#define SCCR_SATACM 0x000000ff
+#define SCCR_SATACM_SHIFT 0
+#define SCCR_SATACM_0 0x00000000
+#define SCCR_SATACM_1 0x00000055
+#define SCCR_SATACM_2 0x000000aa
+#define SCCR_SATACM_3 0x000000ff
+#endif
+
#define SCCR_PCIEXP1CM 0x00300000
#define SCCR_PCIEXP1CM_SHIFT 20
#define SCCR_PCIEXP1CM_0 0x00000000
@@ -814,17 +822,6 @@
#define SCCR_PCIEXP2CM_2 0x00080000
#define SCCR_PCIEXP2CM_3 0x000c0000
-/* All of the four SATA controllers must have the same clock ratio */
-#define SCCR_SATA1CM 0x000000c0
-#define SCCR_SATA1CM_SHIFT 6
-#define SCCR_SATACM 0x000000ff
-#define SCCR_SATACM_SHIFT 0
-#define SCCR_SATACM_0 0x00000000
-#define SCCR_SATACM_1 0x00000055
-#define SCCR_SATACM_2 0x000000aa
-#define SCCR_SATACM_3 0x000000ff
-#endif
-
/* CSn_BDNS - Chip Select memory Bounds Register
*/
#define CSBNDS_SA 0x00FF0000
@@ -1170,10 +1167,52 @@
#define DDRCDR_M_ODR 0x00000002
#define DDRCDR_Q_DRN 0x00000001
+/* PCIE Bridge Register
+*/
+#define PEX_CSB_CTRL_OBPIOE 0x00000001
+#define PEX_CSB_CTRL_IBPIOE 0x00000002
+#define PEX_CSB_CTRL_WDMAE 0x00000004
+#define PEX_CSB_CTRL_RDMAE 0x00000008
+
+#define PEX_CSB_OBCTRL_PIOE 0x00000001
+#define PEX_CSB_OBCTRL_MEMWE 0x00000002
+#define PEX_CSB_OBCTRL_IOWE 0x00000004
+#define PEX_CSB_OBCTRL_CFGWE 0x00000008
+
+#define PEX_CSB_IBCTRL_PIOE 0x00000001
+
+#define PEX_OWAR_EN 0x00000001
+#define PEX_OWAR_TYPE_CFG 0x00000000
+#define PEX_OWAR_TYPE_IO 0x00000002
+#define PEX_OWAR_TYPE_MEM 0x00000004
+#define PEX_OWAR_RLXO 0x00000008
+#define PEX_OWAR_NANP 0x00000010
+#define PEX_OWAR_SIZE 0xFFFFF000
+
+#define PEX_IWAR_EN 0x00000001
+#define PEX_IWAR_TYPE_INT 0x00000000
+#define PEX_IWAR_TYPE_PF 0x00000004
+#define PEX_IWAR_TYPE_NO_PF 0x00000006
+#define PEX_IWAR_NSOV 0x00000008
+#define PEX_IWAR_NSNP 0x00000010
+#define PEX_IWAR_SIZE 0xFFFFF000
+#define PEX_IWAR_SIZE_1M 0x000FF000
+#define PEX_IWAR_SIZE_2M 0x001FF000
+#define PEX_IWAR_SIZE_4M 0x003FF000
+#define PEX_IWAR_SIZE_8M 0x007FF000
+#define PEX_IWAR_SIZE_16M 0x00FFF000
+#define PEX_IWAR_SIZE_32M 0x01FFF000
+#define PEX_IWAR_SIZE_64M 0x03FFF000
+#define PEX_IWAR_SIZE_128M 0x07FFF000
+#define PEX_IWAR_SIZE_256M 0x0FFFF000
+
+#define PEX_GCLK_RATIO 0x440
+
#ifndef __ASSEMBLY__
struct pci_region;
void mpc83xx_pci_init(int num_buses, struct pci_region **reg, int warmboot);
void mpc83xx_pcislave_unlock(int bus);
+void mpc83xx_pcie_init(int num_buses, struct pci_region **reg, int warmboot);
#endif
#endif /* __MPC83XX_H__ */
diff --git a/include/pci.h b/include/pci.h
index eebe8a8..072273b 100644
--- a/include/pci.h
+++ b/include/pci.h
@@ -382,6 +382,8 @@
#define MAX_PCI_REGIONS 7
+#define INDIRECT_TYPE_NO_PCIE_LINK 1
+
/*
* Structure of a PCI controller (host bridge)
*/
@@ -394,6 +396,8 @@
volatile unsigned int *cfg_addr;
volatile unsigned char *cfg_data;
+ int indirect_type;
+
struct pci_region regions[MAX_PCI_REGIONS];
int region_count;