x86: rtc: mc146818: Add helpers to read/write CMOS RAM
On x86 we use CMOS RAM to read and write some settings. Add basic support
for this, including access to registers 128-255.
Signed-off-by: Simon Glass <sjg@chromium.org>
diff --git a/drivers/rtc/mc146818.c b/drivers/rtc/mc146818.c
index 39e6041..c9d318c 100644
--- a/drivers/rtc/mc146818.c
+++ b/drivers/rtc/mc146818.c
@@ -27,9 +27,6 @@
/* Set this to 1 to clear the CMOS RAM */
#define CLEAR_CMOS 0
-static uchar rtc_read (uchar reg);
-static void rtc_write (uchar reg, uchar val);
-
#define RTC_PORT_MC146818 CONFIG_SYS_ISA_IO_BASE_ADDRESS + 0x70
#define RTC_SECONDS 0x00
#define RTC_SECONDS_ALARM 0x01
@@ -60,24 +57,24 @@
{
uchar sec, min, hour, mday, wday, mon, year;
/* here check if rtc can be accessed */
- while((rtc_read(RTC_CONFIG_A)&0x80)==0x80);
- sec = rtc_read (RTC_SECONDS);
- min = rtc_read (RTC_MINUTES);
- hour = rtc_read (RTC_HOURS);
- mday = rtc_read (RTC_DATE_OF_MONTH);
- wday = rtc_read (RTC_DAY_OF_WEEK);
- mon = rtc_read (RTC_MONTH);
- year = rtc_read (RTC_YEAR);
+ while ((rtc_read8(RTC_CONFIG_A) & 0x80) == 0x80);
+ sec = rtc_read8(RTC_SECONDS);
+ min = rtc_read8(RTC_MINUTES);
+ hour = rtc_read8(RTC_HOURS);
+ mday = rtc_read8(RTC_DATE_OF_MONTH);
+ wday = rtc_read8(RTC_DAY_OF_WEEK);
+ mon = rtc_read8(RTC_MONTH);
+ year = rtc_read8(RTC_YEAR);
#ifdef RTC_DEBUG
printf ( "Get RTC year: %02x mon/cent: %02x mday: %02x wday: %02x "
"hr: %02x min: %02x sec: %02x\n",
year, mon, mday, wday,
hour, min, sec );
printf ( "Alarms: month: %02x hour: %02x min: %02x sec: %02x\n",
- rtc_read (RTC_CONFIG_D) & 0x3F,
- rtc_read (RTC_HOURS_ALARM),
- rtc_read (RTC_MINUTES_ALARM),
- rtc_read (RTC_SECONDS_ALARM) );
+ rtc_read8(RTC_CONFIG_D) & 0x3F,
+ rtc_read8(RTC_HOURS_ALARM),
+ rtc_read8(RTC_MINUTES_ALARM),
+ rtc_read8(RTC_SECONDS_ALARM));
#endif
tmp->tm_sec = bcd2bin (sec & 0x7F);
tmp->tm_min = bcd2bin (min & 0x7F);
@@ -108,80 +105,108 @@
tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
#endif
- rtc_write(RTC_CONFIG_B,0x82); /* disables the RTC to update the regs */
+ rtc_write8(RTC_CONFIG_B, 0x82); /* disable the RTC to update the regs */
- rtc_write (RTC_YEAR, bin2bcd(tmp->tm_year % 100));
- rtc_write (RTC_MONTH, bin2bcd(tmp->tm_mon));
- rtc_write (RTC_DAY_OF_WEEK, bin2bcd(tmp->tm_wday));
- rtc_write (RTC_DATE_OF_MONTH, bin2bcd(tmp->tm_mday));
- rtc_write (RTC_HOURS, bin2bcd(tmp->tm_hour));
- rtc_write (RTC_MINUTES, bin2bcd(tmp->tm_min ));
- rtc_write (RTC_SECONDS, bin2bcd(tmp->tm_sec ));
- rtc_write(RTC_CONFIG_B,0x02); /* enables the RTC to update the regs */
+ rtc_write8(RTC_YEAR, bin2bcd(tmp->tm_year % 100));
+ rtc_write8(RTC_MONTH, bin2bcd(tmp->tm_mon));
+ rtc_write8(RTC_DAY_OF_WEEK, bin2bcd(tmp->tm_wday));
+ rtc_write8(RTC_DATE_OF_MONTH, bin2bcd(tmp->tm_mday));
+ rtc_write8(RTC_HOURS, bin2bcd(tmp->tm_hour));
+ rtc_write8(RTC_MINUTES, bin2bcd(tmp->tm_min));
+ rtc_write8(RTC_SECONDS, bin2bcd(tmp->tm_sec));
+ rtc_write8(RTC_CONFIG_B, 0x02); /* enable the RTC to update the regs */
return 0;
}
void rtc_reset (void)
{
- rtc_write(RTC_CONFIG_B,0x82); /* disables the RTC to update the regs */
- rtc_write(RTC_CONFIG_A,0x20); /* Normal OP */
- rtc_write(RTC_CONFIG_B,0x00);
- rtc_write(RTC_CONFIG_B,0x00);
- rtc_write(RTC_CONFIG_B,0x02); /* enables the RTC to update the regs */
+ rtc_write8(RTC_CONFIG_B, 0x82); /* disable the RTC to update the regs */
+ rtc_write8(RTC_CONFIG_A, 0x20); /* Normal OP */
+ rtc_write8(RTC_CONFIG_B, 0x00);
+ rtc_write8(RTC_CONFIG_B, 0x00);
+ rtc_write8(RTC_CONFIG_B, 0x02); /* enable the RTC to update the regs */
}
/* ------------------------------------------------------------------------- */
-#ifdef CONFIG_SYS_RTC_REG_BASE_ADDR
/*
* use direct memory access
*/
-static uchar rtc_read (uchar reg)
+int rtc_read8(int reg)
{
+#ifdef CONFIG_SYS_RTC_REG_BASE_ADDR
return in8(CONFIG_SYS_RTC_REG_BASE_ADDR + reg);
-}
-
-static void rtc_write (uchar reg, uchar val)
-{
- out8(CONFIG_SYS_RTC_REG_BASE_ADDR + reg, val);
-}
#else
-static uchar rtc_read (uchar reg)
-{
- out8(RTC_PORT_MC146818,reg);
- return in8(RTC_PORT_MC146818 + 1);
+ int ofs = 0;
+
+ if (reg >= 128) {
+ ofs = 2;
+ reg -= 128;
+ }
+ out8(RTC_PORT_MC146818 + ofs, reg);
+
+ return in8(RTC_PORT_MC146818 + ofs + 1);
+#endif
}
-static void rtc_write (uchar reg, uchar val)
+void rtc_write8(int reg, uchar val)
{
- out8(RTC_PORT_MC146818,reg);
- out8(RTC_PORT_MC146818+1, val);
-}
+#ifdef CONFIG_SYS_RTC_REG_BASE_ADDR
+ out8(CONFIG_SYS_RTC_REG_BASE_ADDR + reg, val);
+#else
+ int ofs = 0;
+
+ if (reg >= 128) {
+ ofs = 2;
+ reg -= 128;
+ }
+ out8(RTC_PORT_MC146818 + ofs, reg);
+ out8(RTC_PORT_MC146818 + ofs + 1, val);
#endif
+}
+
+u32 rtc_read32(int reg)
+{
+ u32 value = 0;
+ int i;
+
+ for (i = 0; i < sizeof(value); i++)
+ value |= rtc_read8(reg + i) << (i << 3);
+
+ return value;
+}
+
+void rtc_write32(int reg, u32 value)
+{
+ int i;
+
+ for (i = 0; i < sizeof(value); i++)
+ rtc_write8(reg + i, (value >> (i << 3)) & 0xff);
+}
void rtc_init(void)
{
#if CLEAR_CMOS
int i;
- rtc_write(RTC_SECONDS_ALARM, 0);
- rtc_write(RTC_MINUTES_ALARM, 0);
- rtc_write(RTC_HOURS_ALARM, 0);
+ rtc_write8(RTC_SECONDS_ALARM, 0);
+ rtc_write8(RTC_MINUTES_ALARM, 0);
+ rtc_write8(RTC_HOURS_ALARM, 0);
for (i = RTC_CONFIG_A; i < RTC_REG_SIZE; i++)
- rtc_write(i, 0);
+ rtc_write8(i, 0);
printf("RTC: zeroing CMOS RAM\n");
#endif
/* Setup the real time clock */
- rtc_write(RTC_CONFIG_B, RTC_CONFIG_B_24H);
+ rtc_write8(RTC_CONFIG_B, RTC_CONFIG_B_24H);
/* Setup the frequency it operates at */
- rtc_write(RTC_CONFIG_A, RTC_CONFIG_A_REF_CLCK_32KHZ |
+ rtc_write8(RTC_CONFIG_A, RTC_CONFIG_A_REF_CLCK_32KHZ |
RTC_CONFIG_A_RATE_1024HZ);
/* Ensure all reserved bits are 0 in register D */
- rtc_write(RTC_CONFIG_D, RTC_CONFIG_D_VALID_RAM_AND_TIME);
+ rtc_write8(RTC_CONFIG_D, RTC_CONFIG_D_VALID_RAM_AND_TIME);
/* Clear any pending interrupts */
- rtc_read(RTC_CONFIG_C);
+ rtc_read8(RTC_CONFIG_C);
}
#endif
diff --git a/include/rtc.h b/include/rtc.h
index d11aa8b..54e361e 100644
--- a/include/rtc.h
+++ b/include/rtc.h
@@ -51,6 +51,38 @@
unsigned int, unsigned int, unsigned int);
/**
+ * rtc_read8() - Read an 8-bit register
+ *
+ * @reg: Register to read
+ * @return value read
+ */
+int rtc_read8(int reg);
+
+/**
+ * rtc_write8() - Write an 8-bit register
+ *
+ * @reg: Register to write
+ * @value: Value to write
+ */
+void rtc_write8(int reg, uchar val);
+
+/**
+ * rtc_read32() - Read a 32-bit value from the RTC
+ *
+ * @reg: Offset to start reading from
+ * @return value read
+ */
+u32 rtc_read32(int reg);
+
+/**
+ * rtc_write32() - Write a 32-bit value to the RTC
+ *
+ * @reg: Register to start writing to
+ * @value: Value to write
+ */
+void rtc_write32(int reg, u32 value);
+
+/**
* rtc_init() - Set up the real time clock ready for use
*/
void rtc_init(void);