Merge branch 'master' of git://git.denx.de/u-boot-arm
* 'master' of git://git.denx.de/u-boot-arm:
drivers/rtc: add Marvell Integrated RTC
Armada100: Add Board Support for Marvell GuruPlug-Display
Armada100: MFP macro naming correction
arm: auto gen asm-offsets.h for mb86r0x
spear: fix build errors for spear3xx/spear600 platforms
cosmetic: arm: lib/board.c: Coding Style cleanup
ARM: versatile: fix board support
SMDKV310: Enable device tree support
SMDKV310: MMC_SPL: Fix building when using "make O="
arm: a320: enable tagged list support
arm: a320: fix multiline comment style
ARMv7: u8500_href: Add missing header to fix compiler warning
Removed unused define, CONFIG_ARMV7.
avr32: add grasshopper (ICnova AP7000) board
AT91/SPI: fix atmel_dataflash_spi.c to allow building without warnings
MAKEALL: remove AT91 boards that are in boards.cfg
AT91: Makes AT91SAM9263-EK build correctly against u-boot-atmel/master
AT91: Makes AT91SAM9263 SoC build correctly against u-boot-atmel/master
AT91: Board fix for AT91SAM9261-EK
AT91: SoC fix at91sam9261_matrix.h
AT91: Makes AT91SAM9RL-EK build correctly against u-boot-atmel/master
AT91: Makes AT91SAM9RL SoC build correctly against u-boot-atmel/master
AT91: change common at91sam9261 files to compile with new scheme
AT91: fix mistake in at91sam9260_devices.c(spi1_hw_init)
a/a/c/arm920t/at91/reset.c: drop obsolete CONFIG_AT91RM9200_USART
README: fix arm920t/at91 path
net/eth.c: drop obsolete at91rm9200 support
README.at91-soc: remove AT91(RM9200) joining notice
a/a/c/arm920t/cpu.c: remove CONFIG_AT91_LEGACY warning
MAKEALL: remove obsolete at91rm9200 soc
ARM: remove obsolete at91rm9200
omap4: clock init support for omap4460
omap4: support TPS programming
omap: reuse omap3 gpio support in omap4
omap4: sdram init changes for omap4460
omap4: add omap4460 revision detection
mkimage: Add OMAP boot image support
omap: add MMC and FAT support to SPL
omap: add basic SPL support
armv7: start.S: fixes and enhancements for SPL
omap4: automatic sdram detection
omap4: calculate EMIF register values
omap4: add sdram init support
omap4: add clock support
omap4: add OMAP4430 revision check
omap4: cleanup pin mux data
omap4: utility function to identify the context of hw init
DA8xx: fix LPSC constants
DA8xx: switch an enum to defines for consistency
DA8xx: add MMC/SD controller addresses
DaVinci EMAC: declare function for all DA8xx CPUs
DA8xx: add generic GPIO driver
DaVinci: rename gpio_defs.h to gpio.h
omap3evm: eth: Include functions only when necessary
omap3evm: Update ethernet reset sequence for Rev.G board
omap3evm: eth: split function setup_net_chip
omap3: Include array definition only when it is used
omap730p2: fix build breaks
omap2420h4: fix build breaks
omap1610inn: fix build breaks
omap1510inn: fix build breaks
omap5912osk: fix build breaks
omap1610h2: fix build breaks
diff --git a/MAINTAINERS b/MAINTAINERS
index f8d8559..94e7da4 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -593,6 +593,10 @@
cpu9260 ARM926EJS (AT91SAM9260 SoC)
cpu9G20 ARM926EJS (AT91SAM9G20 SoC)
+Ajay Bhargav <ajay.bhargav@einfochips.com>
+
+ gplugd ARM926EJS (ARMADA100 88AP168 SoC)
+
Rishi Bhattacharya <rishi@ti.com>
omap5912osk ARM926EJS
@@ -600,6 +604,7 @@
Andreas Bießmann <andreas.devel@gmail.com>
at91rm9200ek at91rm9200
+ grasshopper avr32
Cliff Brake <cliff.brake@gmail.com>
diff --git a/MAKEALL b/MAKEALL
index 266e231..3b98f03 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -444,14 +444,7 @@
#########################################################################
LIST_at91="$(boards_by_soc at91)\
- $(boards_by_soc at91rm9200)\
- at91sam9260ek \
- at91sam9261ek \
- at91sam9263ek \
- at91sam9g10ek \
- at91sam9g20ek \
at91sam9m10g45ek \
- at91sam9rlek \
pm9g45 \
SBC35_A9G20 \
TNY_A9260 \
diff --git a/Makefile b/Makefile
index e081c25..03d80b7 100644
--- a/Makefile
+++ b/Makefile
@@ -802,60 +802,6 @@
## ARM926EJ-S Systems
#########################################################################
-at91sam9261ek_nandflash_config \
-at91sam9261ek_dataflash_cs0_config \
-at91sam9261ek_dataflash_cs3_config \
-at91sam9261ek_config \
-at91sam9g10ek_nandflash_config \
-at91sam9g10ek_dataflash_cs0_config \
-at91sam9g10ek_dataflash_cs3_config \
-at91sam9g10ek_config : unconfig
- @mkdir -p $(obj)include
- @if [ "$(findstring 9g10,$@)" ] ; then \
- echo "#define CONFIG_AT91SAM9G10EK 1" >>$(obj)include/config.h ; \
- else \
- echo "#define CONFIG_AT91SAM9261EK 1" >>$(obj)include/config.h ; \
- fi;
- @if [ "$(findstring _nandflash,$@)" ] ; then \
- echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \
- elif [ "$(findstring dataflash_cs0,$@)" ] ; then \
- echo "#define CONFIG_SYS_USE_DATAFLASH_CS3 1" >>$(obj)include/config.h ; \
- else \
- echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1" >>$(obj)include/config.h ; \
- fi;
- @$(MKCONFIG) -n $@ -a at91sam9261ek arm arm926ejs at91sam9261ek atmel at91
-
-at91sam9263ek_norflash_config \
-at91sam9263ek_norflash_boot_config \
-at91sam9263ek_nandflash_config \
-at91sam9263ek_dataflash_config \
-at91sam9263ek_dataflash_cs0_config \
-at91sam9263ek_config : unconfig
- @mkdir -p $(obj)include
- @if [ "$(findstring _nandflash,$@)" ] ; then \
- echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \
- elif [ "$(findstring norflash,$@)" ] ; then \
- echo "#define CONFIG_SYS_USE_NORFLASH 1" >>$(obj)include/config.h ; \
- else \
- echo "#define CONFIG_SYS_USE_DATAFLASH 1" >>$(obj)include/config.h ; \
- fi;
- @if [ "$(findstring norflash_boot,$@)" ] ; then \
- echo "#define CONFIG_SYS_USE_BOOT_NORFLASH 1" >>$(obj)include/config.h ; \
- fi;
- @$(MKCONFIG) -n $@ -a at91sam9263ek arm arm926ejs at91sam9263ek atmel at91
-
-at91sam9rlek_nandflash_config \
-at91sam9rlek_dataflash_config \
-at91sam9rlek_dataflash_cs0_config \
-at91sam9rlek_config : unconfig
- @mkdir -p $(obj)include
- @if [ "$(findstring _nandflash,$@)" ] ; then \
- echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \
- else \
- echo "#define CONFIG_SYS_USE_DATAFLASH 1" >>$(obj)include/config.h ; \
- fi;
- @$(MKCONFIG) -n $@ -a at91sam9rlek arm arm926ejs at91sam9rlek atmel at91
-
at91sam9m10g45ek_nandflash_config \
at91sam9m10g45ek_dataflash_config \
at91sam9m10g45ek_dataflash_cs0_config \
@@ -988,15 +934,6 @@
@$(MKCONFIG) -n $@ -t $(@:_config=) edb93xx arm arm920t edb93xx - ep93xx
#########################################################################
-# ARM supplied Versatile development boards
-#########################################################################
-
-versatile_config \
-versatileab_config \
-versatilepb_config : unconfig
- @board/armltd/versatile/split_by_variant.sh $@
-
-#########################################################################
## XScale Systems
#########################################################################
diff --git a/README b/README
index a325892..0886987 100644
--- a/README
+++ b/README
@@ -147,7 +147,7 @@
/cpu CPU specific files
/arm720t Files specific to ARM 720 CPUs
/arm920t Files specific to ARM 920 CPUs
- /at91rm9200 Files specific to Atmel AT91RM9200 CPU
+ /at91 Files specific to Atmel AT91RM9200 CPU
/imx Files specific to Freescale MC9328 i.MX CPUs
/s3c24x0 Files specific to Samsung S3C24X0 CPUs
/arm925t Files specific to ARM 925 CPUs
diff --git a/arch/arm/cpu/arm920t/at91/reset.c b/arch/arm/cpu/arm920t/at91/reset.c
index 4fa0f98..cd9c9f3 100644
--- a/arch/arm/cpu/arm920t/at91/reset.c
+++ b/arch/arm/cpu/arm920t/at91/reset.c
@@ -43,10 +43,6 @@
void reset_cpu(ulong ignored)
{
at91_st_t *st = (at91_st_t *) ATMEL_BASE_ST;
-#if defined(CONFIG_AT91RM9200_USART)
- /*shutdown the console to avoid strange chars during reset */
- serial_exit();
-#endif
board_reset();
diff --git a/arch/arm/cpu/arm920t/at91rm9200/bcm5221.c b/arch/arm/cpu/arm920t/at91rm9200/bcm5221.c
deleted file mode 100644
index 8de3cba..0000000
--- a/arch/arm/cpu/arm920t/at91rm9200/bcm5221.c
+++ /dev/null
@@ -1,232 +0,0 @@
-/*
- * Broadcom BCM5221 Ethernet PHY
- *
- * (C) Copyright 2005 REA Elektronik GmbH <www.rea.de>
- * Anders Larsen <alarsen@rea.de>
- *
- * (C) Copyright 2003
- * Author : Hamid Ikdoumi (Atmel)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <at91rm9200_net.h>
-#include <net.h>
-#ifdef CONFIG_DRIVER_ETHER
-
-#include <bcm5221.h>
-
-#if defined(CONFIG_CMD_NET)
-
-/*
- * Name:
- * bcm5221_IsPhyConnected
- * Description:
- * Reads the 2 PHY ID registers
- * Arguments:
- * p_mac - pointer to AT91S_EMAC struct
- * Return value:
- * TRUE - if id read successfully
- * FALSE- if error
- */
-unsigned int bcm5221_IsPhyConnected (AT91PS_EMAC p_mac)
-{
- unsigned short Id1, Id2;
-
- at91rm9200_EmacEnableMDIO (p_mac);
- at91rm9200_EmacReadPhy (p_mac, BCM5221_PHYID1, &Id1);
- at91rm9200_EmacReadPhy (p_mac, BCM5221_PHYID2, &Id2);
- at91rm9200_EmacDisableMDIO (p_mac);
-
- if ((Id1 == (BCM5221_PHYID1_OUI >> 6)) &&
- ((Id2 >> 10) == (BCM5221_PHYID1_OUI & BCM5221_LSB_MASK)))
- return TRUE;
-
- return FALSE;
-}
-
-/*
- * Name:
- * bcm5221_GetLinkSpeed
- * Description:
- * Link parallel detection status of MAC is checked and set in the
- * MAC configuration registers
- * Arguments:
- * p_mac - pointer to MAC
- * Return value:
- * TRUE - if link status set succesfully
- * FALSE - if link status not set
- */
-unsigned char bcm5221_GetLinkSpeed (AT91PS_EMAC p_mac)
-{
- unsigned short stat1, stat2;
-
- if (!at91rm9200_EmacReadPhy (p_mac, BCM5221_BMSR, &stat1))
- return FALSE;
-
- if (!(stat1 & BCM5221_LINK_STATUS)) /* link status up? */
- return FALSE;
-
- if (!at91rm9200_EmacReadPhy (p_mac, BCM5221_ACSR, &stat2))
- return FALSE;
-
- if ((stat1 & BCM5221_100BASE_TX_FD) && (stat2 & BCM5221_100) && (stat2 & BCM5221_FDX)) {
- /*set Emac for 100BaseTX and Full Duplex */
- p_mac->EMAC_CFG |= AT91C_EMAC_SPD | AT91C_EMAC_FD;
- return TRUE;
- }
-
- if ((stat1 & BCM5221_10BASE_T_FD) && !(stat2 & BCM5221_100) && (stat2 & BCM5221_FDX)) {
- /*set MII for 10BaseT and Full Duplex */
- p_mac->EMAC_CFG = (p_mac->EMAC_CFG &
- ~(AT91C_EMAC_SPD | AT91C_EMAC_FD))
- | AT91C_EMAC_FD;
- return TRUE;
- }
-
- if ((stat1 & BCM5221_100BASE_TX_HD) && (stat2 & BCM5221_100) && !(stat2 & BCM5221_FDX)) {
- /*set MII for 100BaseTX and Half Duplex */
- p_mac->EMAC_CFG = (p_mac->EMAC_CFG &
- ~(AT91C_EMAC_SPD | AT91C_EMAC_FD))
- | AT91C_EMAC_SPD;
- return TRUE;
- }
-
- if ((stat1 & BCM5221_10BASE_T_HD) && !(stat2 & BCM5221_100) && !(stat2 & BCM5221_FDX)) {
- /*set MII for 10BaseT and Half Duplex */
- p_mac->EMAC_CFG &= ~(AT91C_EMAC_SPD | AT91C_EMAC_FD);
- return TRUE;
- }
- return FALSE;
-}
-
-
-/*
- * Name:
- * bcm5221_InitPhy
- * Description:
- * MAC starts checking its link by using parallel detection and
- * Autonegotiation and the same is set in the MAC configuration registers
- * Arguments:
- * p_mac - pointer to struct AT91S_EMAC
- * Return value:
- * TRUE - if link status set succesfully
- * FALSE - if link status not set
- */
-unsigned char bcm5221_InitPhy (AT91PS_EMAC p_mac)
-{
- unsigned char ret = TRUE;
- unsigned short IntValue;
-
- at91rm9200_EmacEnableMDIO (p_mac);
-
- if (!bcm5221_GetLinkSpeed (p_mac)) {
- /* Try another time */
- ret = bcm5221_GetLinkSpeed (p_mac);
- }
-
- /* Disable PHY Interrupts */
- at91rm9200_EmacReadPhy (p_mac, BCM5221_INTR, &IntValue);
- /* clear FDX LED and INTR Enable */
- IntValue &= ~(BCM5221_FDX_LED | BCM5221_INTR_ENABLE);
- /* set FDX, SPD, Link, INTR masks */
- IntValue |= (BCM5221_FDX_MASK | BCM5221_SPD_MASK |
- BCM5221_LINK_MASK | BCM5221_INTR_MASK);
- at91rm9200_EmacWritePhy (p_mac, BCM5221_INTR, &IntValue);
- at91rm9200_EmacDisableMDIO (p_mac);
-
- return (ret);
-}
-
-
-/*
- * Name:
- * bcm5221_AutoNegotiate
- * Description:
- * MAC Autonegotiates with the partner status of same is set in the
- * MAC configuration registers
- * Arguments:
- * dev - pointer to struct net_device
- * Return value:
- * TRUE - if link status set successfully
- * FALSE - if link status not set
- */
-unsigned char bcm5221_AutoNegotiate (AT91PS_EMAC p_mac, int *status)
-{
- unsigned short value;
- unsigned short PhyAnar;
- unsigned short PhyAnalpar;
-
- /* Set bcm5221 control register */
- if (!at91rm9200_EmacReadPhy (p_mac, BCM5221_BMCR, &value))
- return FALSE;
- value &= ~BCM5221_AUTONEG; /* remove autonegotiation enable */
- value |= BCM5221_ISOLATE; /* Electrically isolate PHY */
- if (!at91rm9200_EmacWritePhy (p_mac, BCM5221_BMCR, &value))
- return FALSE;
-
- /* Set the Auto_negotiation Advertisement Register */
- /* MII advertising for 100BaseTxFD and HD, 10BaseTFD and HD, IEEE 802.3 */
- PhyAnar = BCM5221_TX_FDX | BCM5221_TX_HDX |
- BCM5221_10_FDX | BCM5221_10_HDX | BCM5221_AN_IEEE_802_3;
- if (!at91rm9200_EmacWritePhy (p_mac, BCM5221_ANAR, &PhyAnar))
- return FALSE;
-
- /* Read the Control Register */
- if (!at91rm9200_EmacReadPhy (p_mac, BCM5221_BMCR, &value))
- return FALSE;
-
- value |= BCM5221_SPEED_SELECT | BCM5221_AUTONEG | BCM5221_DUPLEX_MODE;
- if (!at91rm9200_EmacWritePhy (p_mac, BCM5221_BMCR, &value))
- return FALSE;
- /* Restart Auto_negotiation */
- value |= BCM5221_RESTART_AUTONEG;
- value &= ~BCM5221_ISOLATE;
- if (!at91rm9200_EmacWritePhy (p_mac, BCM5221_BMCR, &value))
- return FALSE;
-
- /*check AutoNegotiate complete */
- udelay (10000);
- at91rm9200_EmacReadPhy (p_mac, BCM5221_BMSR, &value);
- if (!(value & BCM5221_AUTONEG_COMP))
- return FALSE;
-
- /* Get the AutoNeg Link partner base page */
- if (!at91rm9200_EmacReadPhy (p_mac, BCM5221_ANLPAR, &PhyAnalpar))
- return FALSE;
-
- if ((PhyAnar & BCM5221_TX_FDX) && (PhyAnalpar & BCM5221_TX_FDX)) {
- /*set MII for 100BaseTX and Full Duplex */
- p_mac->EMAC_CFG |= AT91C_EMAC_SPD | AT91C_EMAC_FD;
- return TRUE;
- }
-
- if ((PhyAnar & BCM5221_10_FDX) && (PhyAnalpar & BCM5221_10_FDX)) {
- /*set MII for 10BaseT and Full Duplex */
- p_mac->EMAC_CFG = (p_mac->EMAC_CFG &
- ~(AT91C_EMAC_SPD | AT91C_EMAC_FD))
- | AT91C_EMAC_FD;
- return TRUE;
- }
- return FALSE;
-}
-
-#endif
-
-#endif /* CONFIG_DRIVER_ETHER */
diff --git a/arch/arm/cpu/arm920t/at91rm9200/dm9161.c b/arch/arm/cpu/arm920t/at91rm9200/dm9161.c
deleted file mode 100644
index 6d4384f..0000000
--- a/arch/arm/cpu/arm920t/at91rm9200/dm9161.c
+++ /dev/null
@@ -1,225 +0,0 @@
-/*
- * (C) Copyright 2003
- * Author : Hamid Ikdoumi (Atmel)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <at91rm9200_net.h>
-#include <net.h>
-#ifdef CONFIG_DRIVER_ETHER
-#include <dm9161.h>
-
-#if defined(CONFIG_CMD_NET)
-
-/*
- * Name:
- * dm9161_IsPhyConnected
- * Description:
- * Reads the 2 PHY ID registers
- * Arguments:
- * p_mac - pointer to AT91S_EMAC struct
- * Return value:
- * TRUE - if id read successfully
- * FALSE- if error
- */
-unsigned int dm9161_IsPhyConnected (AT91PS_EMAC p_mac)
-{
- unsigned short Id1, Id2;
-
- at91rm9200_EmacEnableMDIO (p_mac);
- at91rm9200_EmacReadPhy (p_mac, DM9161_PHYID1, &Id1);
- at91rm9200_EmacReadPhy (p_mac, DM9161_PHYID2, &Id2);
- at91rm9200_EmacDisableMDIO (p_mac);
-
- if ((Id1 == (DM9161_PHYID1_OUI >> 6)) &&
- ((Id2 >> 10) == (DM9161_PHYID1_OUI & DM9161_LSB_MASK)))
- return TRUE;
-
- return FALSE;
-}
-
-/*
- * Name:
- * dm9161_GetLinkSpeed
- * Description:
- * Link parallel detection status of MAC is checked and set in the
- * MAC configuration registers
- * Arguments:
- * p_mac - pointer to MAC
- * Return value:
- * TRUE - if link status set succesfully
- * FALSE - if link status not set
- */
-UCHAR dm9161_GetLinkSpeed (AT91PS_EMAC p_mac)
-{
- unsigned short stat1, stat2;
-
- if (!at91rm9200_EmacReadPhy (p_mac, DM9161_BMSR, &stat1))
- return FALSE;
-
- if (!(stat1 & DM9161_LINK_STATUS)) /* link status up? */
- return FALSE;
-
- if (!at91rm9200_EmacReadPhy (p_mac, DM9161_DSCSR, &stat2))
- return FALSE;
-
- if ((stat1 & DM9161_100BASE_TX_FD) && (stat2 & DM9161_100FDX)) {
- /*set Emac for 100BaseTX and Full Duplex */
- p_mac->EMAC_CFG |= AT91C_EMAC_SPD | AT91C_EMAC_FD;
- return TRUE;
- }
-
- if ((stat1 & DM9161_10BASE_T_FD) && (stat2 & DM9161_10FDX)) {
- /*set MII for 10BaseT and Full Duplex */
- p_mac->EMAC_CFG = (p_mac->EMAC_CFG &
- ~(AT91C_EMAC_SPD | AT91C_EMAC_FD))
- | AT91C_EMAC_FD;
- return TRUE;
- }
-
- if ((stat1 & DM9161_100BASE_TX_HD) && (stat2 & DM9161_100HDX)) {
- /*set MII for 100BaseTX and Half Duplex */
- p_mac->EMAC_CFG = (p_mac->EMAC_CFG &
- ~(AT91C_EMAC_SPD | AT91C_EMAC_FD))
- | AT91C_EMAC_SPD;
- return TRUE;
- }
-
- if ((stat1 & DM9161_10BASE_T_HD) && (stat2 & DM9161_10HDX)) {
- /*set MII for 10BaseT and Half Duplex */
- p_mac->EMAC_CFG &= ~(AT91C_EMAC_SPD | AT91C_EMAC_FD);
- return TRUE;
- }
- return FALSE;
-}
-
-
-/*
- * Name:
- * dm9161_InitPhy
- * Description:
- * MAC starts checking its link by using parallel detection and
- * Autonegotiation and the same is set in the MAC configuration registers
- * Arguments:
- * p_mac - pointer to struct AT91S_EMAC
- * Return value:
- * TRUE - if link status set succesfully
- * FALSE - if link status not set
- */
-UCHAR dm9161_InitPhy (AT91PS_EMAC p_mac)
-{
- UCHAR ret = TRUE;
- unsigned short IntValue;
-
- at91rm9200_EmacEnableMDIO (p_mac);
-
- if (!dm9161_GetLinkSpeed (p_mac)) {
- /* Try another time */
- ret = dm9161_GetLinkSpeed (p_mac);
- }
-
- /* Disable PHY Interrupts */
- at91rm9200_EmacReadPhy (p_mac, DM9161_MDINTR, &IntValue);
- /* set FDX, SPD, Link, INTR masks */
- IntValue |= (DM9161_FDX_MASK | DM9161_SPD_MASK |
- DM9161_LINK_MASK | DM9161_INTR_MASK);
- at91rm9200_EmacWritePhy (p_mac, DM9161_MDINTR, &IntValue);
- at91rm9200_EmacDisableMDIO (p_mac);
-
- return (ret);
-}
-
-
-/*
- * Name:
- * dm9161_AutoNegotiate
- * Description:
- * MAC Autonegotiates with the partner status of same is set in the
- * MAC configuration registers
- * Arguments:
- * dev - pointer to struct net_device
- * Return value:
- * TRUE - if link status set successfully
- * FALSE - if link status not set
- */
-UCHAR dm9161_AutoNegotiate (AT91PS_EMAC p_mac, int *status)
-{
- unsigned short value;
- unsigned short PhyAnar;
- unsigned short PhyAnalpar;
-
- /* Set dm9161 control register */
- if (!at91rm9200_EmacReadPhy (p_mac, DM9161_BMCR, &value))
- return FALSE;
- value &= ~DM9161_AUTONEG; /* remove autonegotiation enable */
- value |= DM9161_ISOLATE; /* Electrically isolate PHY */
- if (!at91rm9200_EmacWritePhy (p_mac, DM9161_BMCR, &value))
- return FALSE;
-
- /* Set the Auto_negotiation Advertisement Register */
- /* MII advertising for Next page, 100BaseTxFD and HD, */
- /* 10BaseTFD and HD, IEEE 802.3 */
- PhyAnar = DM9161_NP | DM9161_TX_FDX | DM9161_TX_HDX |
- DM9161_10_FDX | DM9161_10_HDX | DM9161_AN_IEEE_802_3;
- if (!at91rm9200_EmacWritePhy (p_mac, DM9161_ANAR, &PhyAnar))
- return FALSE;
-
- /* Read the Control Register */
- if (!at91rm9200_EmacReadPhy (p_mac, DM9161_BMCR, &value))
- return FALSE;
-
- value |= DM9161_SPEED_SELECT | DM9161_AUTONEG | DM9161_DUPLEX_MODE;
- if (!at91rm9200_EmacWritePhy (p_mac, DM9161_BMCR, &value))
- return FALSE;
- /* Restart Auto_negotiation */
- value |= DM9161_RESTART_AUTONEG;
- value &= ~DM9161_ISOLATE;
- if (!at91rm9200_EmacWritePhy (p_mac, DM9161_BMCR, &value))
- return FALSE;
-
- /*check AutoNegotiate complete */
- udelay (10000);
- at91rm9200_EmacReadPhy (p_mac, DM9161_BMSR, &value);
- if (!(value & DM9161_AUTONEG_COMP))
- return FALSE;
-
- /* Get the AutoNeg Link partner base page */
- if (!at91rm9200_EmacReadPhy (p_mac, DM9161_ANLPAR, &PhyAnalpar))
- return FALSE;
-
- if ((PhyAnar & DM9161_TX_FDX) && (PhyAnalpar & DM9161_TX_FDX)) {
- /*set MII for 100BaseTX and Full Duplex */
- p_mac->EMAC_CFG |= AT91C_EMAC_SPD | AT91C_EMAC_FD;
- return TRUE;
- }
-
- if ((PhyAnar & DM9161_10_FDX) && (PhyAnalpar & DM9161_10_FDX)) {
- /*set MII for 10BaseT and Full Duplex */
- p_mac->EMAC_CFG = (p_mac->EMAC_CFG &
- ~(AT91C_EMAC_SPD | AT91C_EMAC_FD))
- | AT91C_EMAC_FD;
- return TRUE;
- }
- return FALSE;
-}
-
-#endif
-
-#endif /* CONFIG_DRIVER_ETHER */
diff --git a/arch/arm/cpu/arm920t/at91rm9200/ether.c b/arch/arm/cpu/arm920t/at91rm9200/ether.c
deleted file mode 100644
index d7135c5..0000000
--- a/arch/arm/cpu/arm920t/at91rm9200/ether.c
+++ /dev/null
@@ -1,316 +0,0 @@
-/*
- * (C) Copyright 2003
- * Author : Hamid Ikdoumi (Atmel)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <at91rm9200_net.h>
-#include <net.h>
-#include <miiphy.h>
-#include <asm/mach-types.h>
-
-/* ----- Ethernet Buffer definitions ----- */
-
-typedef struct {
- unsigned long addr, size;
-} rbf_t;
-
-#define RBF_ADDR 0xfffffffc
-#define RBF_OWNER (1<<0)
-#define RBF_WRAP (1<<1)
-#define RBF_BROADCAST (1<<31)
-#define RBF_MULTICAST (1<<30)
-#define RBF_UNICAST (1<<29)
-#define RBF_EXTERNAL (1<<28)
-#define RBF_UNKNOWN (1<<27)
-#define RBF_SIZE 0x07ff
-#define RBF_LOCAL4 (1<<26)
-#define RBF_LOCAL3 (1<<25)
-#define RBF_LOCAL2 (1<<24)
-#define RBF_LOCAL1 (1<<23)
-
-#define RBF_FRAMEMAX 64
-#define RBF_FRAMELEN 0x600
-
-#ifdef CONFIG_DRIVER_ETHER
-
-#if defined(CONFIG_CMD_NET)
-
-/* alignment as per Errata #11 (64 bytes) is insufficient! */
-rbf_t rbfdt[RBF_FRAMEMAX] __attribute__((aligned(512)));
-rbf_t *rbfp;
-
-unsigned char rbf_framebuf[RBF_FRAMEMAX][RBF_FRAMELEN]
- __attribute__((aligned(4)));
-
-/* structure to interface the PHY */
-AT91S_PhyOps PhyOps;
-
-AT91PS_EMAC p_mac;
-
-/*********** EMAC Phy layer Management functions *************************/
-/*
- * Name:
- * at91rm9200_EmacEnableMDIO
- * Description:
- * Enables the MDIO bit in MAC control register
- * Arguments:
- * p_mac - pointer to struct AT91S_EMAC
- * Return value:
- * none
- */
-void at91rm9200_EmacEnableMDIO (AT91PS_EMAC p_mac)
-{
- /* Mac CTRL reg set for MDIO enable */
- p_mac->EMAC_CTL |= AT91C_EMAC_MPE; /* Management port enable */
-}
-
-/*
- * Name:
- * at91rm9200_EmacDisableMDIO
- * Description:
- * Disables the MDIO bit in MAC control register
- * Arguments:
- * p_mac - pointer to struct AT91S_EMAC
- * Return value:
- * none
- */
-void at91rm9200_EmacDisableMDIO (AT91PS_EMAC p_mac)
-{
- /* Mac CTRL reg set for MDIO disable */
- p_mac->EMAC_CTL &= ~AT91C_EMAC_MPE; /* Management port disable */
-}
-
-
-/*
- * Name:
- * at91rm9200_EmacReadPhy
- * Description:
- * Reads data from the PHY register
- * Arguments:
- * dev - pointer to struct net_device
- * RegisterAddress - unsigned char
- * pInput - pointer to value read from register
- * Return value:
- * TRUE - if data read successfully
- */
-UCHAR at91rm9200_EmacReadPhy (AT91PS_EMAC p_mac,
- unsigned char RegisterAddress,
- unsigned short *pInput)
-{
- p_mac->EMAC_MAN = (AT91C_EMAC_HIGH & ~AT91C_EMAC_LOW) |
- (AT91C_EMAC_RW_R) |
- (RegisterAddress << 18) |
- (AT91C_EMAC_CODE_802_3);
-
- udelay (10000);
-
- *pInput = (unsigned short) p_mac->EMAC_MAN;
-
- return TRUE;
-}
-
-
-/*
- * Name:
- * at91rm9200_EmacWritePhy
- * Description:
- * Writes data to the PHY register
- * Arguments:
- * dev - pointer to struct net_device
- * RegisterAddress - unsigned char
- * pOutput - pointer to value to be written in the register
- * Return value:
- * TRUE - if data read successfully
- */
-UCHAR at91rm9200_EmacWritePhy (AT91PS_EMAC p_mac,
- unsigned char RegisterAddress,
- unsigned short *pOutput)
-{
- p_mac->EMAC_MAN = (AT91C_EMAC_HIGH & ~AT91C_EMAC_LOW) |
- AT91C_EMAC_CODE_802_3 | AT91C_EMAC_RW_W |
- (RegisterAddress << 18) | *pOutput;
-
- udelay (10000);
-
- return TRUE;
-}
-
-int eth_init (bd_t * bd)
-{
- int ret;
- int i;
- uchar enetaddr[6];
-
- p_mac = AT91C_BASE_EMAC;
-
- /* PIO Disable Register */
- *AT91C_PIOA_PDR = AT91C_PA16_EMDIO | AT91C_PA15_EMDC | AT91C_PA14_ERXER |
- AT91C_PA13_ERX1 | AT91C_PA12_ERX0 | AT91C_PA11_ECRS_ECRSDV |
- AT91C_PA10_ETX1 | AT91C_PA9_ETX0 | AT91C_PA8_ETXEN |
- AT91C_PA7_ETXCK_EREFCK;
-
-#ifdef CONFIG_AT91C_USE_RMII
- *AT91C_PIOB_PDR = AT91C_PB19_ERXCK;
- *AT91C_PIOB_BSR = AT91C_PB19_ERXCK;
-#else
- *AT91C_PIOB_PDR = AT91C_PB19_ERXCK | AT91C_PB18_ECOL | AT91C_PB17_ERXDV |
- AT91C_PB16_ERX3 | AT91C_PB15_ERX2 | AT91C_PB14_ETXER |
- AT91C_PB13_ETX3 | AT91C_PB12_ETX2;
-
- /* Select B Register */
- *AT91C_PIOB_BSR = AT91C_PB19_ERXCK | AT91C_PB18_ECOL |
- AT91C_PB17_ERXDV | AT91C_PB16_ERX3 | AT91C_PB15_ERX2 |
- AT91C_PB14_ETXER | AT91C_PB13_ETX3 | AT91C_PB12_ETX2;
-#endif
-
- *AT91C_PMC_PCER = 1 << AT91C_ID_EMAC; /* Peripheral Clock Enable Register */
-
- p_mac->EMAC_CFG |= AT91C_EMAC_CSR; /* Clear statistics */
-
- /* Init Ethernet buffers */
- for (i = 0; i < RBF_FRAMEMAX; i++) {
- rbfdt[i].addr = (unsigned long)rbf_framebuf[i];
- rbfdt[i].size = 0;
- }
- rbfdt[RBF_FRAMEMAX - 1].addr |= RBF_WRAP;
- rbfp = &rbfdt[0];
-
- eth_getenv_enetaddr("ethaddr", enetaddr);
-
- /* The CSB337 originally used a version of the MicroMonitor bootloader
- * which saved Ethernet addresses in the "wrong" order. Operating
- * systems (like Linux) know this, and apply a workaround. Replicate
- * that MicroMonitor behavior so we avoid needing to make such OS code
- * care about which bootloader was used.
- */
- if (machine_is_csb337()) {
- p_mac->EMAC_SA2H = (enetaddr[0] << 8) | (enetaddr[1]);
- p_mac->EMAC_SA2L = (enetaddr[2] << 24) | (enetaddr[3] << 16)
- | (enetaddr[4] << 8) | (enetaddr[5]);
- } else {
- p_mac->EMAC_SA2L = (enetaddr[3] << 24) | (enetaddr[2] << 16)
- | (enetaddr[1] << 8) | (enetaddr[0]);
- p_mac->EMAC_SA2H = (enetaddr[5] << 8) | (enetaddr[4]);
- }
-
- p_mac->EMAC_RBQP = (long) (&rbfdt[0]);
- p_mac->EMAC_RSR &= ~(AT91C_EMAC_RSR_OVR | AT91C_EMAC_REC | AT91C_EMAC_BNA);
-
- p_mac->EMAC_CFG = (p_mac->EMAC_CFG | AT91C_EMAC_CAF | AT91C_EMAC_NBC)
- & ~AT91C_EMAC_CLK;
-
-#ifdef CONFIG_AT91C_USE_RMII
- p_mac->EMAC_CFG |= AT91C_EMAC_RMII;
-#endif
-
-#if (AT91C_MASTER_CLOCK > 40000000)
- /* MDIO clock must not exceed 2.5 MHz, so enable MCK divider */
- p_mac->EMAC_CFG |= AT91C_EMAC_CLK_HCLK_64;
-#endif
-
- p_mac->EMAC_CTL |= AT91C_EMAC_TE | AT91C_EMAC_RE;
-
- at91rm9200_GetPhyInterface (& PhyOps);
-
- if (!PhyOps.IsPhyConnected (p_mac))
- printf ("PHY not connected!!\n\r");
-
- /* MII management start from here */
- if (!(p_mac->EMAC_SR & AT91C_EMAC_LINK)) {
- if (!(ret = PhyOps.Init (p_mac))) {
- printf ("MAC: error during MII initialization\n");
- return 0;
- }
- } else {
- printf ("No link\n\r");
- return 0;
- }
-
- return 0;
-}
-
-int eth_send (volatile void *packet, int length)
-{
- while (!(p_mac->EMAC_TSR & AT91C_EMAC_BNQ));
- p_mac->EMAC_TAR = (long) packet;
- p_mac->EMAC_TCR = length;
- while (p_mac->EMAC_TCR & 0x7ff);
- p_mac->EMAC_TSR |= AT91C_EMAC_COMP;
- return 0;
-}
-
-int eth_rx (void)
-{
- int size;
-
- if (!(rbfp->addr & RBF_OWNER))
- return 0;
-
- size = rbfp->size & RBF_SIZE;
- NetReceive ((volatile uchar *) (rbfp->addr & RBF_ADDR), size);
-
- rbfp->addr &= ~RBF_OWNER;
- if (rbfp->addr & RBF_WRAP)
- rbfp = &rbfdt[0];
- else
- rbfp++;
-
- p_mac->EMAC_RSR |= AT91C_EMAC_REC;
-
- return size;
-}
-
-void eth_halt (void)
-{
-};
-
-#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
-int at91rm9200_miiphy_read(const char *devname, unsigned char addr,
- unsigned char reg, unsigned short * value)
-{
- at91rm9200_EmacEnableMDIO (p_mac);
- at91rm9200_EmacReadPhy (p_mac, reg, value);
- at91rm9200_EmacDisableMDIO (p_mac);
- return 0;
-}
-
-int at91rm9200_miiphy_write(const char *devname, unsigned char addr,
- unsigned char reg, unsigned short value)
-{
- at91rm9200_EmacEnableMDIO (p_mac);
- at91rm9200_EmacWritePhy (p_mac, reg, &value);
- at91rm9200_EmacDisableMDIO (p_mac);
- return 0;
-}
-
-#endif
-
-int at91rm9200_miiphy_initialize(bd_t *bis)
-{
-#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
- miiphy_register("at91rm9200phy", at91rm9200_miiphy_read, at91rm9200_miiphy_write);
-#endif
- return 0;
-}
-
-#endif
-
-#endif /* CONFIG_DRIVER_ETHER */
diff --git a/arch/arm/cpu/arm920t/at91rm9200/i2c.c b/arch/arm/cpu/arm920t/at91rm9200/i2c.c
deleted file mode 100644
index 1711088..0000000
--- a/arch/arm/cpu/arm920t/at91rm9200/i2c.c
+++ /dev/null
@@ -1,192 +0,0 @@
-/*
- * i2c Support for Atmel's AT91RM9200 Two-Wire Interface
- *
- * (c) Rick Bronson
- *
- * Borrowed heavily from original work by:
- * Copyright (c) 2000 Philip Edelbrock <phil@stimpy.netroedge.com>
- *
- * Modified to work with u-boot by (C) 2004 Gary Jennejohn garyj@denx.de
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
-*/
-#include <common.h>
-
-#ifdef CONFIG_HARD_I2C
-
-#include <i2c.h>
-#include <asm/io.h>
-#include <asm/arch/hardware.h>
-
-#include <at91rm9200_i2c.h>
-
-/* define DEBUG */
-
-/*
- * Poll the i2c status register until the specified bit is set.
- * Returns 0 if timed out (100 msec)
- */
-static short at91_poll_status(AT91PS_TWI twi, unsigned long bit) {
- int loop_cntr = 10000;
- do {
- udelay(10);
- } while (!(twi->TWI_SR & bit) && (--loop_cntr > 0));
-
- return (loop_cntr > 0);
-}
-
-/*
- * Generic i2c master transfer entrypoint
- *
- * rw == 1 means that this is a read
- */
-static int
-at91_xfer(unsigned char chip, unsigned int addr, int alen,
- unsigned char *buffer, int len, int rw)
-{
- AT91PS_TWI twi = (AT91PS_TWI) AT91_TWI_BASE;
- int length;
- unsigned char *buf;
- /* Set the TWI Master Mode Register */
- twi->TWI_MMR = (chip << 16) | (alen << 8)
- | ((rw == 1) ? AT91C_TWI_MREAD : 0);
-
- /* Set TWI Internal Address Register with first messages data field */
- if (alen > 0)
- twi->TWI_IADR = addr;
-
- length = len;
- buf = buffer;
- if (length && buf) { /* sanity check */
- if (rw) {
- twi->TWI_CR = AT91C_TWI_START;
- while (length--) {
- if (!length)
- twi->TWI_CR = AT91C_TWI_STOP;
- /* Wait until transfer is finished */
- if (!at91_poll_status(twi, AT91C_TWI_RXRDY)) {
- debug ("at91_i2c: timeout 1\n");
- return 1;
- }
- *buf++ = twi->TWI_RHR;
- }
- if (!at91_poll_status(twi, AT91C_TWI_TXCOMP)) {
- debug ("at91_i2c: timeout 2\n");
- return 1;
- }
- } else {
- twi->TWI_CR = AT91C_TWI_START;
- while (length--) {
- twi->TWI_THR = *buf++;
- if (!length)
- twi->TWI_CR = AT91C_TWI_STOP;
- if (!at91_poll_status(twi, AT91C_TWI_TXRDY)) {
- debug ("at91_i2c: timeout 3\n");
- return 1;
- }
- }
- /* Wait until transfer is finished */
- if (!at91_poll_status(twi, AT91C_TWI_TXCOMP)) {
- debug ("at91_i2c: timeout 4\n");
- return 1;
- }
- }
- }
- return 0;
-}
-
-int
-i2c_probe(unsigned char chip)
-{
- unsigned char buffer[1];
-
- return at91_xfer(chip, 0, 0, buffer, 1, 1);
-}
-
-int
-i2c_read (unsigned char chip, unsigned int addr, int alen,
- unsigned char *buffer, int len)
-{
-#ifdef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
- /* we only allow one address byte */
- if (alen > 1)
- return 1;
- /* XXX assume an ATMEL AT24C16 */
- if (alen == 1) {
-#if 0 /* EEPROM code already sets this correctly */
- chip |= (addr >> 8) & 0xff;
-#endif
- addr = addr & 0xff;
- }
-#endif
- return at91_xfer(chip, addr, alen, buffer, len, 1);
-}
-
-int
-i2c_write(unsigned char chip, unsigned int addr, int alen,
- unsigned char *buffer, int len)
-{
-#ifdef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
- int i;
- unsigned char *buf;
-
- /* we only allow one address byte */
- if (alen > 1)
- return 1;
- /* XXX assume an ATMEL AT24C16 */
- if (alen == 1) {
- buf = buffer;
- /* do single byte writes */
- for (i = 0; i < len; i++) {
-#if 0 /* EEPROM code already sets this correctly */
- chip |= (addr >> 8) & 0xff;
-#endif
- addr = addr & 0xff;
- if (at91_xfer(chip, addr, alen, buf++, 1, 0))
- return 1;
- addr++;
- }
- return 0;
- }
-#endif
- return at91_xfer(chip, addr, alen, buffer, len, 0);
-}
-
-/*
- * Main initialization routine
- */
-void
-i2c_init(int speed, int slaveaddr)
-{
- AT91PS_TWI twi = (AT91PS_TWI) AT91_TWI_BASE;
-
- *AT91C_PIOA_PDR = AT91C_PA25_TWD | AT91C_PA26_TWCK;
- *AT91C_PIOA_ASR = AT91C_PA25_TWD | AT91C_PA26_TWCK;
- *AT91C_PIOA_MDER = AT91C_PA25_TWD | AT91C_PA26_TWCK;
- *AT91C_PMC_PCER = 1 << AT91C_ID_TWI; /* enable peripheral clock */
-
- twi->TWI_IDR = 0x3ff; /* Disable all interrupts */
- twi->TWI_CR = AT91C_TWI_SWRST; /* Reset peripheral */
- twi->TWI_CR = AT91C_TWI_MSEN | AT91C_TWI_SVDIS; /* Set Master mode */
-
- /* Here, CKDIV = 1 and CHDIV=CLDIV ==> CLDIV = CHDIV = 1/4*((Fmclk/FTWI) -6) */
- twi->TWI_CWGR = AT91C_TWI_CKDIV1 | AT91C_TWI_CLDIV3 | (AT91C_TWI_CLDIV3 << 8);
-
- debug ("Found AT91 i2c\n");
- return;
-}
-
-#endif /* CONFIG_HARD_I2C */
diff --git a/arch/arm/cpu/arm920t/at91rm9200/ks8721.c b/arch/arm/cpu/arm920t/at91rm9200/ks8721.c
deleted file mode 100644
index 9fe3793..0000000
--- a/arch/arm/cpu/arm920t/at91rm9200/ks8721.c
+++ /dev/null
@@ -1,249 +0,0 @@
-/*
- * (C) Copyright 2006
- * Author : Eric Benard (Eukrea Electromatique)
- * based on dm9161.c which is :
- * (C) Copyright 2003
- * Author : Hamid Ikdoumi (Atmel)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <at91rm9200_net.h>
-#include <net.h>
-#include <ks8721.h>
-
-#ifdef CONFIG_DRIVER_ETHER
-
-#if defined(CONFIG_CMD_NET)
-
-/*
- * Name:
- * ks8721_isphyconnected
- * Description:
- * Reads the 2 PHY ID registers
- * Arguments:
- * p_mac - pointer to AT91S_EMAC struct
- * Return value:
- * 1 - if id read successfully
- * 0 - if error
- */
-unsigned int ks8721_isphyconnected(AT91PS_EMAC p_mac)
-{
- unsigned short id1, id2;
-
- at91rm9200_EmacEnableMDIO(p_mac);
- at91rm9200_EmacReadPhy(p_mac,
- CONFIG_PHY_ADDRESS | KS8721_PHYID1, &id1);
- at91rm9200_EmacReadPhy(p_mac,
- CONFIG_PHY_ADDRESS | KS8721_PHYID2, &id2);
- at91rm9200_EmacDisableMDIO(p_mac);
-
- if ((id1 == (KS8721_PHYID_OUI >> 6)) &&
- ((id2 >> 10) == (KS8721_PHYID_OUI & KS8721_LSB_MASK))) {
- if ((id2 & KS8721_MODELMASK) == KS8721BL_MODEL)
- printf("Micrel KS8721bL PHY detected : ");
- else
- printf("Unknown Micrel PHY detected : ");
- return 1;
- }
- return 0;
-}
-
-/*
- * Name:
- * ks8721_getlinkspeed
- * Description:
- * Link parallel detection status of MAC is checked and set in the
- * MAC configuration registers
- * Arguments:
- * p_mac - pointer to MAC
- * Return value:
- * 1 - if link status set succesfully
- * 0 - if link status not set
- */
-unsigned char ks8721_getlinkspeed(AT91PS_EMAC p_mac)
-{
- unsigned short stat1;
-
- if (!at91rm9200_EmacReadPhy(p_mac, KS8721_BMSR, &stat1))
- return 0;
-
- if (!(stat1 & KS8721_LINK_STATUS)) {
- /* link status up? */
- printf("Link Down !\n");
- return 0;
- }
-
- if (stat1 & KS8721_100BASE_TX_FD) {
- /* set Emac for 100BaseTX and Full Duplex */
- printf("100BT FD\n");
- p_mac->EMAC_CFG |= AT91C_EMAC_SPD | AT91C_EMAC_FD;
- return 1;
- }
-
- if (stat1 & KS8721_10BASE_T_FD) {
- /* set MII for 10BaseT and Full Duplex */
- printf("10BT FD\n");
- p_mac->EMAC_CFG = (p_mac->EMAC_CFG &
- ~(AT91C_EMAC_SPD | AT91C_EMAC_FD))
- | AT91C_EMAC_FD;
- return 1;
- }
-
- if (stat1 & KS8721_100BASE_T4_HD) {
- /* set MII for 100BaseTX and Half Duplex */
- printf("100BT HD\n");
- p_mac->EMAC_CFG = (p_mac->EMAC_CFG &
- ~(AT91C_EMAC_SPD | AT91C_EMAC_FD))
- | AT91C_EMAC_SPD;
- return 1;
- }
-
- if (stat1 & KS8721_10BASE_T_HD) {
- /* set MII for 10BaseT and Half Duplex */
- printf("10BT HD\n");
- p_mac->EMAC_CFG &= ~(AT91C_EMAC_SPD | AT91C_EMAC_FD);
- return 1;
- }
- return 0;
-}
-
-/*
- * Name:
- * ks8721_initphy
- * Description:
- * MAC starts checking its link by using parallel detection and
- * Autonegotiation and the same is set in the MAC configuration registers
- * Arguments:
- * p_mac - pointer to struct AT91S_EMAC
- * Return value:
- * 1 - if link status set succesfully
- * 0 - if link status not set
- */
-unsigned char ks8721_initphy(AT91PS_EMAC p_mac)
-{
- unsigned char ret = 1;
- unsigned short intvalue;
-
- at91rm9200_EmacEnableMDIO(p_mac);
-
- /* Try another time */
- if (!ks8721_getlinkspeed(p_mac))
- ret = ks8721_getlinkspeed(p_mac);
-
- /* Disable PHY Interrupts */
- intvalue = 0;
- at91rm9200_EmacWritePhy(p_mac,
- CONFIG_PHY_ADDRESS | KS8721_MDINTR, &intvalue);
- at91rm9200_EmacDisableMDIO(p_mac);
-
- return ret;
-}
-
-/*
- * Name:
- * ks8721_autonegotiate
- * Description:
- * MAC Autonegotiates with the partner status of same is set in the
- * MAC configuration registers
- * Arguments:
- * dev - pointer to struct net_device
- * Return value:
- * 1 - if link status set successfully
- * 0 - if link status not set
- */
-unsigned char ks8721_autonegotiate(AT91PS_EMAC p_mac, int *status)
-{
- unsigned short value;
- unsigned short phyanar;
- unsigned short phyanalpar;
-
- /* Set ks8721 control register */
- if (!at91rm9200_EmacReadPhy(p_mac,
- CONFIG_PHY_ADDRESS | KS8721_BMCR, &value))
- return 0;
-
- /* remove autonegotiation enable */
- value &= ~KS8721_AUTONEG;
- /* Electrically isolate PHY */
- value |= KS8721_ISOLATE;
- if (!at91rm9200_EmacWritePhy(p_mac,
- CONFIG_PHY_ADDRESS | KS8721_BMCR, &value)) {
- return 0;
- }
- /*
- * Set the Auto_negotiation Advertisement Register
- * MII advertising for Next page, 100BaseTxFD and HD,
- * 10BaseTFD and HD, IEEE 802.3
- */
- phyanar = KS8721_NP | KS8721_TX_FDX | KS8721_TX_HDX |
- KS8721_10_FDX | KS8721_10_HDX | KS8721_AN_IEEE_802_3;
- if (!at91rm9200_EmacWritePhy(p_mac,
- CONFIG_PHY_ADDRESS | KS8721_ANAR, &phyanar)) {
- return 0;
- }
- /* Read the Control Register */
- if (!at91rm9200_EmacReadPhy(p_mac,
- CONFIG_PHY_ADDRESS | KS8721_BMCR, &value)) {
- return 0;
- }
- value |= KS8721_SPEED_SELECT | KS8721_AUTONEG | KS8721_DUPLEX_MODE;
- if (!at91rm9200_EmacWritePhy(p_mac,
- CONFIG_PHY_ADDRESS | KS8721_BMCR, &value)) {
- return 0;
- }
- /* Restart Auto_negotiation */
- value |= KS8721_RESTART_AUTONEG;
- value &= ~KS8721_ISOLATE;
- if (!at91rm9200_EmacWritePhy(p_mac,
- CONFIG_PHY_ADDRESS | KS8721_BMCR, &value)) {
- return 0;
- }
- /* Check AutoNegotiate complete */
- udelay(10000);
- at91rm9200_EmacReadPhy(p_mac,
- CONFIG_PHY_ADDRESS | KS8721_BMSR, &value);
- if (!(value & KS8721_AUTONEG_COMP))
- return 0;
-
- /* Get the AutoNeg Link partner base page */
- if (!at91rm9200_EmacReadPhy(p_mac,
- CONFIG_PHY_ADDRESS | KS8721_ANLPAR, &phyanalpar)) {
- return 0;
- }
-
- if ((phyanar & KS8721_TX_FDX) && (phyanalpar & KS8721_TX_FDX)) {
- /* Set MII for 100BaseTX and Full Duplex */
- p_mac->EMAC_CFG |= AT91C_EMAC_SPD | AT91C_EMAC_FD;
- return 1;
- }
-
- if ((phyanar & KS8721_10_FDX) && (phyanalpar & KS8721_10_FDX)) {
- /* Set MII for 10BaseT and Full Duplex */
- p_mac->EMAC_CFG = (p_mac->EMAC_CFG &
- ~(AT91C_EMAC_SPD | AT91C_EMAC_FD))
- | AT91C_EMAC_FD;
- return 1;
- }
- return 0;
-}
-
-#endif /* CONFIG_CMD_NET */
-
-#endif /* CONFIG_DRIVER_ETHER */
diff --git a/arch/arm/cpu/arm920t/at91rm9200/lowlevel_init.S b/arch/arm/cpu/arm920t/at91rm9200/lowlevel_init.S
deleted file mode 100644
index 2e7160f..0000000
--- a/arch/arm/cpu/arm920t/at91rm9200/lowlevel_init.S
+++ /dev/null
@@ -1,169 +0,0 @@
-/*
- * Memory Setup stuff - taken from blob memsetup.S
- *
- * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and
- * Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl)
- *
- * Modified for the at91rm9200dk board by
- * (C) Copyright 2004
- * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <version.h>
-
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
-/*
- * some parameters for the board
- *
- * This is based on rm9200dk.cfg for the BDI2000 from ABATRON which in
- * turn is based on the boot.bin code from ATMEL
- *
- */
-#include <asm/arch/AT91RM9200.h>
-
-_MTEXT_BASE:
-#undef START_FROM_MEM
-#ifdef START_FROM_MEM
- .word CONFIG_SYS_TEXT_BASE-PHYS_FLASH_1
-#else
- .word CONFIG_SYS_TEXT_BASE
-#endif
-
-.globl lowlevel_init
-lowlevel_init:
- /* Get the CKGR Base Address */
- ldr r1, =AT91C_BASE_CKGR
- /* Main oscillator Enable register */
-#ifdef CONFIG_SYS_USE_MAIN_OSCILLATOR
- ldr r0, =0x0000FF01 /* Enable main oscillator, OSCOUNT = 0xFF */
-#else
- ldr r0, =0x0000FF00 /* Disable main oscillator, OSCOUNT = 0xFF */
-#endif
- str r0, [r1, #AT91C_CKGR_MOR]
- /* Add loop to compensate Main Oscillator startup time */
- ldr r0, =0x00000010
-LoopOsc:
- subs r0, r0, #1
- bhi LoopOsc
-
- /* memory control configuration */
- /* this isn't very elegant, but what the heck */
- ldr r0, =SMRDATA
- ldr r1, _MTEXT_BASE
- sub r0, r0, r1
- add r2, r0, #80
-0:
- /* the address */
- ldr r1, [r0], #4
- /* the value */
- ldr r3, [r0], #4
- str r3, [r1]
- cmp r2, r0
- bne 0b
- /* delay - this is all done by guess */
- ldr r0, =0x00010000
- /* (vs reading PMC_SR for LOCKA, LOCKB ... or MOSCS earlier) */
-1:
- subs r0, r0, #1
- bhi 1b
- ldr r0, =SMRDATA1
- ldr r1, _MTEXT_BASE
- sub r0, r0, r1
- add r2, r0, #176
-2:
- /* the address */
- ldr r1, [r0], #4
- /* the value */
- ldr r3, [r0], #4
- str r3, [r1]
- cmp r2, r0
- bne 2b
-
- /* switch from FastBus to Asynchronous clock mode */
- mrc p15, 0, r0, c1, c0, 0
- orr r0, r0, #0xC0000000 @ set bit 31 (iA) and 30 (nF)
- mcr p15, 0, r0, c1, c0, 0
-
- /* everything is fine now */
- mov pc, lr
-
- .ltorg
-
-SMRDATA:
- .word AT91C_EBI_CFGR
- .word CONFIG_SYS_EBI_CFGR_VAL
- .word AT91C_SMC_CSR0
- .word CONFIG_SYS_SMC_CSR0_VAL
- .word AT91C_PLLAR
- .word CONFIG_SYS_PLLAR_VAL
- .word AT91C_PLLBR
- .word CONFIG_SYS_PLLBR_VAL
- .word AT91C_MCKR
- .word CONFIG_SYS_MCKR_VAL
- /* here there's a delay */
-SMRDATA1:
- .word AT91C_PIOC_ASR
- .word CONFIG_SYS_PIOC_ASR_VAL
- .word AT91C_PIOC_BSR
- .word CONFIG_SYS_PIOC_BSR_VAL
- .word AT91C_PIOC_PDR
- .word CONFIG_SYS_PIOC_PDR_VAL
- .word AT91C_EBI_CSA
- .word CONFIG_SYS_EBI_CSA_VAL
- .word AT91C_SDRC_CR
- .word CONFIG_SYS_SDRC_CR_VAL
- .word AT91C_SDRC_MR
- .word CONFIG_SYS_SDRC_MR_VAL
- .word CONFIG_SYS_SDRAM
- .word CONFIG_SYS_SDRAM_VAL
- .word AT91C_SDRC_MR
- .word CONFIG_SYS_SDRC_MR_VAL1
- .word CONFIG_SYS_SDRAM
- .word CONFIG_SYS_SDRAM_VAL
- .word CONFIG_SYS_SDRAM
- .word CONFIG_SYS_SDRAM_VAL
- .word CONFIG_SYS_SDRAM
- .word CONFIG_SYS_SDRAM_VAL
- .word CONFIG_SYS_SDRAM
- .word CONFIG_SYS_SDRAM_VAL
- .word CONFIG_SYS_SDRAM
- .word CONFIG_SYS_SDRAM_VAL
- .word CONFIG_SYS_SDRAM
- .word CONFIG_SYS_SDRAM_VAL
- .word CONFIG_SYS_SDRAM
- .word CONFIG_SYS_SDRAM_VAL
- .word CONFIG_SYS_SDRAM
- .word CONFIG_SYS_SDRAM_VAL
- .word AT91C_SDRC_MR
- .word CONFIG_SYS_SDRC_MR_VAL2
- .word CONFIG_SYS_SDRAM1
- .word CONFIG_SYS_SDRAM_VAL
- .word AT91C_SDRC_TR
- .word CONFIG_SYS_SDRC_TR_VAL
- .word CONFIG_SYS_SDRAM
- .word CONFIG_SYS_SDRAM_VAL
- .word AT91C_SDRC_MR
- .word CONFIG_SYS_SDRC_MR_VAL3
- .word CONFIG_SYS_SDRAM
- .word CONFIG_SYS_SDRAM_VAL
- /* SMRDATA1 is 176 bytes long */
-#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
diff --git a/arch/arm/cpu/arm920t/at91rm9200/lxt972.c b/arch/arm/cpu/arm920t/at91rm9200/lxt972.c
deleted file mode 100644
index f02cfdd..0000000
--- a/arch/arm/cpu/arm920t/at91rm9200/lxt972.c
+++ /dev/null
@@ -1,192 +0,0 @@
-/*
- *
- * (C) Copyright 2003
- * Author : Hamid Ikdoumi (Atmel)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * Adapted for KwikByte KB920x board: 22APR2005
- */
-
-#include <common.h>
-#include <at91rm9200_net.h>
-#include <net.h>
-#include <miiphy.h>
-#include <lxt971a.h>
-
-#ifdef CONFIG_DRIVER_ETHER
-
-#if defined(CONFIG_CMD_NET)
-
-/*
- * Name:
- * lxt972_IsPhyConnected
- * Description:
- * Reads the 2 PHY ID registers
- * Arguments:
- * p_mac - pointer to AT91S_EMAC struct
- * Return value:
- * TRUE - if id read successfully
- * FALSE- if error
- */
-unsigned int lxt972_IsPhyConnected (AT91PS_EMAC p_mac)
-{
- unsigned short Id1, Id2;
-
- at91rm9200_EmacEnableMDIO (p_mac);
- at91rm9200_EmacReadPhy(p_mac, MII_PHYSID1, &Id1);
- at91rm9200_EmacReadPhy(p_mac, MII_PHYSID2, &Id2);
- at91rm9200_EmacDisableMDIO (p_mac);
-
- if ((Id1 == (0x0013)) && ((Id2 & 0xFFF0) == 0x78E0))
- return TRUE;
-
- return FALSE;
-}
-
-/*
- * Name:
- * lxt972_GetLinkSpeed
- * Description:
- * Link parallel detection status of MAC is checked and set in the
- * MAC configuration registers
- * Arguments:
- * p_mac - pointer to MAC
- * Return value:
- * TRUE - if link status set succesfully
- * FALSE - if link status not set
- */
-UCHAR lxt972_GetLinkSpeed (AT91PS_EMAC p_mac)
-{
- unsigned short stat1;
-
- if (!at91rm9200_EmacReadPhy (p_mac, PHY_LXT971_STAT2, &stat1))
- return FALSE;
-
- if (!(stat1 & PHY_LXT971_STAT2_LINK)) /* link status up? */
- return FALSE;
-
- if (stat1 & PHY_LXT971_STAT2_100BTX) {
-
- if (stat1 & PHY_LXT971_STAT2_DUPLEX_MODE) {
-
- /*set Emac for 100BaseTX and Full Duplex */
- p_mac->EMAC_CFG |= AT91C_EMAC_SPD | AT91C_EMAC_FD;
- } else {
-
- /*set Emac for 100BaseTX and Half Duplex */
- p_mac->EMAC_CFG = (p_mac->EMAC_CFG &
- ~(AT91C_EMAC_SPD | AT91C_EMAC_FD))
- | AT91C_EMAC_SPD;
- }
-
- return TRUE;
-
- } else {
-
- if (stat1 & PHY_LXT971_STAT2_DUPLEX_MODE) {
-
- /*set MII for 10BaseT and Full Duplex */
- p_mac->EMAC_CFG = (p_mac->EMAC_CFG &
- ~(AT91C_EMAC_SPD | AT91C_EMAC_FD))
- | AT91C_EMAC_FD;
- } else {
-
- /*set MII for 10BaseT and Half Duplex */
- p_mac->EMAC_CFG &= ~(AT91C_EMAC_SPD | AT91C_EMAC_FD);
- }
-
- return TRUE;
- }
-
- return FALSE;
-}
-
-
-/*
- * Name:
- * lxt972_InitPhy
- * Description:
- * MAC starts checking its link by using parallel detection and
- * Autonegotiation and the same is set in the MAC configuration registers
- * Arguments:
- * p_mac - pointer to struct AT91S_EMAC
- * Return value:
- * TRUE - if link status set succesfully
- * FALSE - if link status not set
- */
-UCHAR lxt972_InitPhy (AT91PS_EMAC p_mac)
-{
- UCHAR ret = TRUE;
-
- at91rm9200_EmacEnableMDIO (p_mac);
-
- if (!lxt972_GetLinkSpeed (p_mac)) {
- /* Try another time */
- ret = lxt972_GetLinkSpeed (p_mac);
- }
-
- /* Disable PHY Interrupts */
- at91rm9200_EmacWritePhy (p_mac, PHY_LXT971_INT_ENABLE, 0);
-
- at91rm9200_EmacDisableMDIO (p_mac);
-
- return (ret);
-}
-
-
-/*
- * Name:
- * lxt972_AutoNegotiate
- * Description:
- * MAC Autonegotiates with the partner status of same is set in the
- * MAC configuration registers
- * Arguments:
- * dev - pointer to struct net_device
- * Return value:
- * TRUE - if link status set successfully
- * FALSE - if link status not set
- */
-UCHAR lxt972_AutoNegotiate (AT91PS_EMAC p_mac, int *status)
-{
- unsigned short value;
-
- /* Set lxt972 control register */
- if (!at91rm9200_EmacReadPhy (p_mac, MII_BMCR, &value))
- return FALSE;
-
- /* Restart Auto_negotiation */
- value |= BMCR_ANRESTART;
- if (!at91rm9200_EmacWritePhy (p_mac, MII_BMCR, &value))
- return FALSE;
-
- /*check AutoNegotiate complete */
- udelay (10000);
- at91rm9200_EmacReadPhy(p_mac, MII_BMSR, &value);
- if (!(value & BMSR_ANEGCOMPLETE))
- return FALSE;
-
- return (lxt972_GetLinkSpeed (p_mac));
-}
-
-#endif
-
-#endif /* CONFIG_DRIVER_ETHER */
diff --git a/arch/arm/cpu/arm920t/at91rm9200/reset.c b/arch/arm/cpu/arm920t/at91rm9200/reset.c
deleted file mode 100644
index 945ea2c..0000000
--- a/arch/arm/cpu/arm920t/at91rm9200/reset.c
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * (C) Copyright 2002
- * Lineo, Inc. <www.lineo.com>
- * Bernhard Kuhn <bkuhn@lineo.com>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Alex Zuepke <azu@sysgo.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/arch/hardware.h>
-
-void board_reset(void) __attribute__((__weak__));
-
-/*
- * Reset the cpu by setting up the watchdog timer and let him time out
- * or toggle a GPIO pin on the AT91RM9200DK board
- */
-void reset_cpu (ulong ignored)
-{
-
-#if defined(CONFIG_AT91RM9200_USART)
- /*shutdown the console to avoid strange chars during reset */
- serial_exit();
-#endif
-
- if (board_reset)
- board_reset();
-
- /* this is the way Linux does it */
-
- /* FIXME:
- * These defines should be moved into
- * include/asm-arm/arch-at91rm9200/AT91RM9200.h
- * as soon as the whitespace fix gets applied.
- */
- #define AT91C_ST_RSTEN (0x1 << 16)
- #define AT91C_ST_EXTEN (0x1 << 17)
- #define AT91C_ST_WDRST (0x1 << 0)
- #define ST_WDMR *((unsigned long *)0xfffffd08) /* watchdog mode register */
- #define ST_CR *((unsigned long *)0xfffffd00) /* system clock control register */
-
- ST_WDMR = AT91C_ST_RSTEN | AT91C_ST_EXTEN | 1 ;
- ST_CR = AT91C_ST_WDRST;
-
- while (1);
- /* Never reached */
-}
diff --git a/arch/arm/cpu/arm920t/at91rm9200/spi.c b/arch/arm/cpu/arm920t/at91rm9200/spi.c
deleted file mode 100644
index c70efc6..0000000
--- a/arch/arm/cpu/arm920t/at91rm9200/spi.c
+++ /dev/null
@@ -1,152 +0,0 @@
-/* Driver for ATMEL DataFlash support
- * Author : Hamid Ikdoumi (Atmel)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- */
-
-#include <config.h>
-#include <common.h>
-#include <asm/hardware.h>
-
-#ifdef CONFIG_HAS_DATAFLASH
-#include <dataflash.h>
-
-#define AT91C_SPI_CLK 10000000 /* Max Value = 10MHz to be compliant to
- the Continuous Array Read function */
-
-/* AC Characteristics */
-/* DLYBS = tCSS = 250ns min and DLYBCT = tCSH = 250ns */
-#define DATAFLASH_TCSS (0xC << 16)
-#define DATAFLASH_TCHS (0x1 << 24)
-
-#define AT91C_TIMEOUT_WRDY 200000
-#define AT91C_SPI_PCS0_SERIAL_DATAFLASH 0xE /* Chip Select 0: NPCS0%1110 */
-#define AT91C_SPI_PCS3_DATAFLASH_CARD 0x7 /* Chip Select 3: NPCS3%0111 */
-
-/*-------------------------------------------------------------------*/
-/* SPI DataFlash Init */
-/*-------------------------------------------------------------------*/
-void AT91F_SpiInit(void)
-{
- /* Configure PIOs */
- AT91C_BASE_PIOA->PIO_ASR =
- AT91C_PA3_NPCS0 | AT91C_PA4_NPCS1 | AT91C_PA1_MOSI |
- AT91C_PA5_NPCS2 | AT91C_PA6_NPCS3 | AT91C_PA0_MISO |
- AT91C_PA2_SPCK;
- AT91C_BASE_PIOA->PIO_PDR =
- AT91C_PA3_NPCS0 | AT91C_PA4_NPCS1 | AT91C_PA1_MOSI |
- AT91C_PA5_NPCS2 | AT91C_PA6_NPCS3 | AT91C_PA0_MISO |
- AT91C_PA2_SPCK;
- /* Enable CLock */
- AT91C_BASE_PMC->PMC_PCER = 1 << AT91C_ID_SPI;
-
- /* Reset the SPI */
- AT91C_BASE_SPI->SPI_CR = AT91C_SPI_SWRST;
-
- /* Configure SPI in Master Mode with No CS selected !!! */
- AT91C_BASE_SPI->SPI_MR =
- AT91C_SPI_MSTR | AT91C_SPI_MODFDIS | AT91C_SPI_PCS;
-
- /* Configure CS0 and CS3 */
- *(AT91C_SPI_CSR + 0) =
- AT91C_SPI_CPOL | (AT91C_SPI_DLYBS & DATAFLASH_TCSS) |
- (AT91C_SPI_DLYBCT & DATAFLASH_TCHS) |
- ((AT91C_MASTER_CLOCK / (2*AT91C_SPI_CLK)) << 8);
-
- *(AT91C_SPI_CSR + 3) =
- AT91C_SPI_CPOL | (AT91C_SPI_DLYBS & DATAFLASH_TCSS) |
- (AT91C_SPI_DLYBCT & DATAFLASH_TCHS) |
- ((AT91C_MASTER_CLOCK / (2*AT91C_SPI_CLK)) << 8);
-}
-
-void AT91F_SpiEnable(int cs)
-{
- switch(cs) {
- case 0: /* Configure SPI CS0 for Serial DataFlash AT45DBxx */
- AT91C_BASE_SPI->SPI_MR &= 0xFFF0FFFF;
- AT91C_BASE_SPI->SPI_MR |=
- ((AT91C_SPI_PCS0_SERIAL_DATAFLASH<<16) &
- AT91C_SPI_PCS);
- break;
- case 3: /* Configure SPI CS3 for Serial DataFlash Card */
- /* Set up PIO SDC_TYPE to switch on DataFlash Card */
- /* and not MMC/SDCard */
- AT91C_BASE_PIOB->PIO_PER =
- AT91C_PIO_PB7; /* Set in PIO mode */
- AT91C_BASE_PIOB->PIO_OER =
- AT91C_PIO_PB7; /* Configure in output */
- /* Clear Output */
- AT91C_BASE_PIOB->PIO_CODR = AT91C_PIO_PB7;
- /* Configure PCS */
- AT91C_BASE_SPI->SPI_MR &= 0xFFF0FFFF;
- AT91C_BASE_SPI->SPI_MR |=
- ((AT91C_SPI_PCS3_DATAFLASH_CARD<<16) & AT91C_SPI_PCS);
- break;
- }
-
- /* SPI_Enable */
- AT91C_BASE_SPI->SPI_CR = AT91C_SPI_SPIEN; }
-
-/*---------------------------------------------------------------------------*/
-/* \fn AT91F_SpiWrite */
-/* \brief Set the PDC registers for a transfert */
-/*---------------------------------------------------------------------------*/
-unsigned int AT91F_SpiWrite ( AT91PS_DataflashDesc pDesc )
-{
- unsigned int timeout;
- unsigned long start;
-
- pDesc->state = BUSY;
-
- AT91C_BASE_SPI->SPI_PTCR = AT91C_PDC_TXTDIS + AT91C_PDC_RXTDIS;
-
- /* Initialize the Transmit and Receive Pointer */
- AT91C_BASE_SPI->SPI_RPR = (unsigned int)pDesc->rx_cmd_pt ;
- AT91C_BASE_SPI->SPI_TPR = (unsigned int)pDesc->tx_cmd_pt ;
-
- /* Intialize the Transmit and Receive Counters */
- AT91C_BASE_SPI->SPI_RCR = pDesc->rx_cmd_size;
- AT91C_BASE_SPI->SPI_TCR = pDesc->tx_cmd_size;
-
- if ( pDesc->tx_data_size != 0 ) {
- /* Initialize the Next Transmit and Next Receive Pointer */
- AT91C_BASE_SPI->SPI_RNPR = (unsigned int)pDesc->rx_data_pt ;
- AT91C_BASE_SPI->SPI_TNPR = (unsigned int)pDesc->tx_data_pt ;
-
- /* Intialize the Next Transmit and Next Receive Counters */
- AT91C_BASE_SPI->SPI_RNCR = pDesc->rx_data_size ;
- AT91C_BASE_SPI->SPI_TNCR = pDesc->tx_data_size ;
- }
-
- /* arm simple, non interrupt dependent timer */
- start = get_timer(0);
- timeout = 0;
-
- AT91C_BASE_SPI->SPI_PTCR = AT91C_PDC_TXTEN + AT91C_PDC_RXTEN;
- while(!(AT91C_BASE_SPI->SPI_SR & AT91C_SPI_RXBUFF) &&
- ((timeout = get_timer(start) ) < CONFIG_SYS_SPI_WRITE_TOUT));
- AT91C_BASE_SPI->SPI_PTCR = AT91C_PDC_TXTDIS + AT91C_PDC_RXTDIS;
- pDesc->state = IDLE;
-
- if (timeout >= CONFIG_SYS_SPI_WRITE_TOUT){
- printf("Error Timeout\n\r");
- return DATAFLASH_ERROR;
- }
-
- return DATAFLASH_OK;
-}
-#endif
diff --git a/arch/arm/cpu/arm920t/at91rm9200/timer.c b/arch/arm/cpu/arm920t/at91rm9200/timer.c
deleted file mode 100644
index fbe74b6..0000000
--- a/arch/arm/cpu/arm920t/at91rm9200/timer.c
+++ /dev/null
@@ -1,142 +0,0 @@
-/*
- * (C) Copyright 2002
- * Lineo, Inc. <www.lineo.com>
- * Bernhard Kuhn <bkuhn@lineo.com>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Alex Zuepke <azu@sysgo.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-/*#include <asm/io.h>*/
-#include <asm/arch/hardware.h>
-/*#include <asm/proc/ptrace.h>*/
-
-/* the number of clocks per CONFIG_SYS_HZ */
-#define TIMER_LOAD_VAL (CONFIG_SYS_HZ_CLOCK/CONFIG_SYS_HZ)
-
-/* macro to read the 16 bit timer */
-#define READ_TIMER (tmr->TC_CV & 0x0000ffff)
-AT91PS_TC tmr;
-
-static ulong timestamp;
-static ulong lastinc;
-
-int timer_init (void)
-{
- tmr = AT91C_BASE_TC0;
-
- /* enables TC1.0 clock */
- *AT91C_PMC_PCER = 1 << AT91C_ID_TC0; /* enable clock */
-
- *AT91C_TCB0_BCR = 0;
- *AT91C_TCB0_BMR = AT91C_TCB_TC0XC0S_NONE | AT91C_TCB_TC1XC1S_NONE | AT91C_TCB_TC2XC2S_NONE;
- tmr->TC_CCR = AT91C_TC_CLKDIS;
-#define AT91C_TC_CMR_CPCTRG (1 << 14)
- /* set to MCLK/2 and restart the timer when the vlaue in TC_RC is reached */
- tmr->TC_CMR = AT91C_TC_TIMER_DIV1_CLOCK | AT91C_TC_CMR_CPCTRG;
-
- tmr->TC_IDR = ~0ul;
- tmr->TC_RC = TIMER_LOAD_VAL;
- lastinc = 0;
- tmr->TC_CCR = AT91C_TC_SWTRG | AT91C_TC_CLKEN;
- timestamp = 0;
-
- return (0);
-}
-
-/*
- * timer without interrupts
- */
-ulong get_timer (ulong base)
-{
- return get_timer_masked () - base;
-}
-
-void __udelay (unsigned long usec)
-{
- udelay_masked(usec);
-}
-
-ulong get_timer_raw (void)
-{
- ulong now = READ_TIMER;
-
- if (now >= lastinc) {
- /* normal mode */
- timestamp += now - lastinc;
- } else {
- /* we have an overflow ... */
- timestamp += now + TIMER_LOAD_VAL - lastinc;
- }
- lastinc = now;
-
- return timestamp;
-}
-
-ulong get_timer_masked (void)
-{
- return get_timer_raw()/TIMER_LOAD_VAL;
-}
-
-void udelay_masked (unsigned long usec)
-{
- ulong tmo;
- ulong endtime;
- signed long diff;
-
- tmo = CONFIG_SYS_HZ_CLOCK / 1000;
- tmo *= usec;
- tmo /= 1000;
-
- endtime = get_timer_raw () + tmo;
-
- do {
- ulong now = get_timer_raw ();
- diff = endtime - now;
- } while (diff >= 0);
-}
-
-/*
- * This function is derived from PowerPC code (read timebase as long long).
- * On ARM it just returns the timer value.
- */
-unsigned long long get_ticks(void)
-{
- return get_timer(0);
-}
-
-/*
- * This function is derived from PowerPC code (timebase clock frequency).
- * On ARM it returns the number of timer ticks per second.
- */
-ulong get_tbclk (void)
-{
- ulong tbclk;
-
- tbclk = CONFIG_SYS_HZ;
- return tbclk;
-}
diff --git a/arch/arm/cpu/arm920t/at91rm9200/usb.c b/arch/arm/cpu/arm920t/at91rm9200/usb.c
deleted file mode 100644
index 72355dc..0000000
--- a/arch/arm/cpu/arm920t/at91rm9200/usb.c
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * (C) Copyright 2006
- * DENX Software Engineering <mk@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-#if defined(CONFIG_USB_OHCI_NEW) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT)
-# ifdef CONFIG_AT91RM9200
-
-#include <asm/arch/hardware.h>
-
-int usb_cpu_init(void)
-{
- /* Enable USB host clock. */
- *AT91C_PMC_SCER = AT91C_PMC_UHP; /* 48MHz clock enabled for UHP */
- *AT91C_PMC_PCER = 1 << AT91C_ID_UHP; /* Peripheral Clock Enable Register */
- return 0;
-}
-
-int usb_cpu_stop(void)
-{
- /* Initialization failed */
- *AT91C_PMC_PCDR = 1 << AT91C_ID_UHP; /* Peripheral Clock Disable Register */
- *AT91C_PMC_SCDR = AT91C_PMC_UHP; /* 48MHz clock disabled for UHP */
- return 0;
-}
-
-int usb_cpu_init_fail(void)
-{
- return usb_cpu_stop();
-}
-
-# endif /* CONFIG_AT91RM9200 */
-#endif /* defined(CONFIG_USB_OHCI) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT) */
diff --git a/arch/arm/cpu/arm920t/cpu.c b/arch/arm/cpu/arm920t/cpu.c
index be82c87..34adb11 100644
--- a/arch/arm/cpu/arm920t/cpu.c
+++ b/arch/arm/cpu/arm920t/cpu.c
@@ -33,10 +33,6 @@
#include <command.h>
#include <asm/system.h>
-#ifdef CONFIG_AT91_LEGACY
-#warning Your board is using legacy AT91RM9200 SoC access. Please update!
-#endif
-
static void cache_flush(void);
int cleanup_before_linux (void)
diff --git a/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c b/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c
index 6bdc75c..65b8d51 100644
--- a/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c
+++ b/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c
@@ -138,7 +138,7 @@
at91_set_b_periph(AT91_PIO_PORTC, 4, 1);
}
if (cs_mask & (1 << 3)) {
- at91_set_pio_output(AT91_PIO_PORTC, 3, 1);
+ at91_set_b_periph(AT91_PIO_PORTC, 3, 1);
}
if (cs_mask & (1 << 4)) {
at91_set_pio_output(AT91_PIO_PORTB, 3, 1);
diff --git a/arch/arm/cpu/arm926ejs/at91/at91sam9261_devices.c b/arch/arm/cpu/arm926ejs/at91/at91sam9261_devices.c
index b4353ef..edc7972 100644
--- a/arch/arm/cpu/arm926ejs/at91/at91sam9261_devices.c
+++ b/arch/arm/cpu/arm926ejs/at91/at91sam9261_devices.c
@@ -23,77 +23,73 @@
*/
#include <common.h>
+#include <asm/io.h>
#include <asm/arch/at91_common.h>
#include <asm/arch/at91_pmc.h>
#include <asm/arch/gpio.h>
-#include <asm/arch/io.h>
+
+/*
+ * if CONFIG_AT91_GPIO_PULLUP ist set, keep pullups on on all
+ * peripheral pins. Good to have if hardware is soldered optionally
+ * or in case of SPI no slave is selected. Avoid lines to float
+ * needlessly. Use a short local PUP define.
+ *
+ * Due to errata "TXD floats when CTS is inactive" pullups are always
+ * on for TXD pins.
+ */
+#ifdef CONFIG_AT91_GPIO_PULLUP
+# define PUP CONFIG_AT91_GPIO_PULLUP
+#else
+# define PUP 0
+#endif
void at91_serial0_hw_init(void)
{
- at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
+ at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
at91_set_a_periph(AT91_PIO_PORTC, 8, 1); /* TXD0 */
at91_set_a_periph(AT91_PIO_PORTC, 9, 0); /* RXD0 */
- writel(1 << AT91SAM9261_ID_US0, &pmc->pcer);
+ writel(1 << ATMEL_ID_USART0, &pmc->pcer);
}
void at91_serial1_hw_init(void)
{
- at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
+ at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
at91_set_a_periph(AT91_PIO_PORTC, 12, 1); /* TXD1 */
at91_set_a_periph(AT91_PIO_PORTC, 13, 0); /* RXD1 */
- writel(1 << AT91SAM9261_ID_US1, &pmc->pcer);
+ writel(1 << ATMEL_ID_USART1, &pmc->pcer);
}
void at91_serial2_hw_init(void)
{
- at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
+ at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
at91_set_a_periph(AT91_PIO_PORTC, 14, 1); /* TXD2 */
at91_set_a_periph(AT91_PIO_PORTC, 15, 0); /* RXD2 */
- writel(1 << AT91SAM9261_ID_US2, &pmc->pcer);
+ writel(1 << ATMEL_ID_USART2, &pmc->pcer);
}
-void at91_serial3_hw_init(void)
+void at91_seriald_hw_init(void)
{
- at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
+ at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
at91_set_a_periph(AT91_PIO_PORTA, 9, 0); /* DRXD */
at91_set_a_periph(AT91_PIO_PORTA, 10, 1); /* DTXD */
- writel(1 << AT91_ID_SYS, &pmc->pcer);
+ writel(1 << ATMEL_ID_SYS, &pmc->pcer);
}
-void at91_serial_hw_init(void)
-{
-#ifdef CONFIG_USART0
- at91_serial0_hw_init();
-#endif
-
-#ifdef CONFIG_USART1
- at91_serial1_hw_init();
-#endif
-
-#ifdef CONFIG_USART2
- at91_serial2_hw_init();
-#endif
-
-#ifdef CONFIG_USART3 /* DBGU */
- at91_serial3_hw_init();
-#endif
-}
-
-#ifdef CONFIG_HAS_DATAFLASH
+#if defined(CONFIG_HAS_DATAFLASH) || defined(CONFIG_ATMEL_SPI)
void at91_spi0_hw_init(unsigned long cs_mask)
{
- at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
+ at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
- at91_set_a_periph(AT91_PIO_PORTA, 0, 0); /* SPI0_MISO */
- at91_set_a_periph(AT91_PIO_PORTA, 1, 0); /* SPI0_MOSI */
- at91_set_a_periph(AT91_PIO_PORTA, 2, 0); /* SPI0_SPCK */
+ at91_set_a_periph(AT91_PIO_PORTA, 0, PUP); /* SPI0_MISO */
+ at91_set_a_periph(AT91_PIO_PORTA, 1, PUP); /* SPI0_MOSI */
+ at91_set_a_periph(AT91_PIO_PORTA, 2, PUP); /* SPI0_SPCK */
/* Enable clock */
- writel(1 << AT91SAM9261_ID_SPI0, &pmc->pcer);
+ writel(1 << ATMEL_ID_SPI0, &pmc->pcer);
if (cs_mask & (1 << 0)) {
at91_set_a_periph(AT91_PIO_PORTA, 3, 1);
@@ -123,14 +119,14 @@
void at91_spi1_hw_init(unsigned long cs_mask)
{
- at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
+ at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
- at91_set_a_periph(AT91_PIO_PORTB, 30, 0); /* SPI1_MISO */
- at91_set_a_periph(AT91_PIO_PORTB, 31, 0); /* SPI1_MOSI */
- at91_set_a_periph(AT91_PIO_PORTB, 29, 0); /* SPI1_SPCK */
+ at91_set_a_periph(AT91_PIO_PORTB, 30, PUP); /* SPI1_MISO */
+ at91_set_a_periph(AT91_PIO_PORTB, 31, PUP); /* SPI1_MOSI */
+ at91_set_a_periph(AT91_PIO_PORTB, 29, PUP); /* SPI1_SPCK */
/* Enable clock */
- writel(1 << AT91SAM9261_ID_SPI1, &pmc->pcer);
+ writel(1 << ATMEL_ID_SPI1, &pmc->pcer);
if (cs_mask & (1 << 0)) {
at91_set_a_periph(AT91_PIO_PORTB, 28, 1);
diff --git a/arch/arm/cpu/arm926ejs/at91/at91sam9263_devices.c b/arch/arm/cpu/arm926ejs/at91/at91sam9263_devices.c
index 15e880a..6eb0f30 100644
--- a/arch/arm/cpu/arm926ejs/at91/at91sam9263_devices.c
+++ b/arch/arm/cpu/arm926ejs/at91/at91sam9263_devices.c
@@ -28,17 +28,31 @@
#include <common.h>
#include <asm/io.h>
-#include <asm/arch/hardware.h>
#include <asm/arch/at91_common.h>
#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_pio.h>
+#include <asm/arch/gpio.h>
+
+/*
+ * if CONFIG_AT91_GPIO_PULLUP ist set, keep pullups on on all
+ * peripheral pins. Good to have if hardware is soldered optionally
+ * or in case of SPI no slave is selected. Avoid lines to float
+ * needlessly. Use a short local PUP define.
+ *
+ * Due to errata "TXD floats when CTS is inactive" pullups are always
+ * on for TXD pins.
+ */
+#ifdef CONFIG_AT91_GPIO_PULLUP
+# define PUP CONFIG_AT91_GPIO_PULLUP
+#else
+# define PUP 0
+#endif
void at91_serial0_hw_init(void)
{
at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
at91_set_a_periph(AT91_PIO_PORTA, 26, 1); /* TXD0 */
- at91_set_a_periph(AT91_PIO_PORTA, 27, 0); /* RXD0 */
+ at91_set_a_periph(AT91_PIO_PORTA, 27, PUP); /* RXD0 */
writel(1 << ATMEL_ID_USART0, &pmc->pcer);
}
@@ -47,7 +61,7 @@
at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
at91_set_a_periph(AT91_PIO_PORTD, 0, 1); /* TXD1 */
- at91_set_a_periph(AT91_PIO_PORTD, 1, 0); /* RXD1 */
+ at91_set_a_periph(AT91_PIO_PORTD, 1, PUP); /* RXD1 */
writel(1 << ATMEL_ID_USART1, &pmc->pcer);
}
@@ -56,7 +70,7 @@
at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
at91_set_a_periph(AT91_PIO_PORTD, 2, 1); /* TXD2 */
- at91_set_a_periph(AT91_PIO_PORTD, 3, 0); /* RXD2 */
+ at91_set_a_periph(AT91_PIO_PORTD, 3, PUP); /* RXD2 */
writel(1 << ATMEL_ID_USART2, &pmc->pcer);
}
@@ -64,7 +78,7 @@
{
at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
- at91_set_a_periph(AT91_PIO_PORTC, 30, 0); /* DRXD */
+ at91_set_a_periph(AT91_PIO_PORTC, 30, PUP); /* DRXD */
at91_set_a_periph(AT91_PIO_PORTC, 31, 1); /* DTXD */
writel(1 << ATMEL_ID_SYS, &pmc->pcer);
}
@@ -74,9 +88,9 @@
{
at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
- at91_set_b_periph(AT91_PIO_PORTA, 0, 0); /* SPI0_MISO */
- at91_set_b_periph(AT91_PIO_PORTA, 1, 0); /* SPI0_MOSI */
- at91_set_b_periph(AT91_PIO_PORTA, 2, 0); /* SPI0_SPCK */
+ at91_set_b_periph(AT91_PIO_PORTA, 0, PUP); /* SPI0_MISO */
+ at91_set_b_periph(AT91_PIO_PORTA, 1, PUP); /* SPI0_MOSI */
+ at91_set_b_periph(AT91_PIO_PORTA, 2, PUP); /* SPI0_SPCK */
/* Enable clock */
writel(1 << ATMEL_ID_SPI0, &pmc->pcer);
@@ -111,9 +125,9 @@
{
at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
- at91_set_a_periph(AT91_PIO_PORTB, 12, 0); /* SPI1_MISO */
- at91_set_a_periph(AT91_PIO_PORTB, 13, 0); /* SPI1_MOSI */
- at91_set_a_periph(AT91_PIO_PORTB, 14, 0); /* SPI1_SPCK */
+ at91_set_a_periph(AT91_PIO_PORTB, 12, PUP); /* SPI1_MISO */
+ at91_set_a_periph(AT91_PIO_PORTB, 13, PUP); /* SPI1_MOSI */
+ at91_set_a_periph(AT91_PIO_PORTB, 14, PUP); /* SPI1_SPCK */
/* Enable clock */
writel(1 << ATMEL_ID_SPI1, &pmc->pcer);
diff --git a/arch/arm/cpu/arm926ejs/at91/at91sam9rl_devices.c b/arch/arm/cpu/arm926ejs/at91/at91sam9rl_devices.c
index 4f570f4..b0a1687 100644
--- a/arch/arm/cpu/arm926ejs/at91/at91sam9rl_devices.c
+++ b/arch/arm/cpu/arm926ejs/at91/at91sam9rl_devices.c
@@ -23,77 +23,73 @@
*/
#include <common.h>
+#include <asm/io.h>
#include <asm/arch/at91_common.h>
#include <asm/arch/at91_pmc.h>
#include <asm/arch/gpio.h>
-#include <asm/arch/io.h>
+
+/*
+ * if CONFIG_AT91_GPIO_PULLUP ist set, keep pullups on on all
+ * peripheral pins. Good to have if hardware is soldered optionally
+ * or in case of SPI no slave is selected. Avoid lines to float
+ * needlessly. Use a short local PUP define.
+ *
+ * Due to errata "TXD floats when CTS is inactive" pullups are always
+ * on for TXD pins.
+ */
+#ifdef CONFIG_AT91_GPIO_PULLUP
+# define PUP CONFIG_AT91_GPIO_PULLUP
+#else
+# define PUP 0
+#endif
void at91_serial0_hw_init(void)
{
- at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
+ at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
at91_set_a_periph(AT91_PIO_PORTA, 6, 1); /* TXD0 */
- at91_set_a_periph(AT91_PIO_PORTA, 7, 0); /* RXD0 */
- writel(1 << AT91SAM9RL_ID_US0, &pmc->pcer);
+ at91_set_a_periph(AT91_PIO_PORTA, 7, PUP); /* RXD0 */
+ writel(1 << ATMEL_ID_USART0, &pmc->pcer);
}
void at91_serial1_hw_init(void)
{
- at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
+ at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
at91_set_a_periph(AT91_PIO_PORTA, 11, 1); /* TXD1 */
- at91_set_a_periph(AT91_PIO_PORTA, 12, 0); /* RXD1 */
- writel(1 << AT91SAM9RL_ID_US1, &pmc->pcer);
+ at91_set_a_periph(AT91_PIO_PORTA, 12, PUP); /* RXD1 */
+ writel(1 << ATMEL_ID_USART1, &pmc->pcer);
}
void at91_serial2_hw_init(void)
{
- at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
+ at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
at91_set_a_periph(AT91_PIO_PORTA, 13, 1); /* TXD2 */
- at91_set_a_periph(AT91_PIO_PORTA, 14, 0); /* RXD2 */
- writel(1 << AT91SAM9RL_ID_US2, &pmc->pcer);
+ at91_set_a_periph(AT91_PIO_PORTA, 14, PUP); /* RXD2 */
+ writel(1 << ATMEL_ID_USART2, &pmc->pcer);
}
-void at91_serial3_hw_init(void)
+void at91_seriald_hw_init(void)
{
- at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
+ at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
- at91_set_a_periph(AT91_PIO_PORTA, 21, 0); /* DRXD */
+ at91_set_a_periph(AT91_PIO_PORTA, 21, PUP); /* DRXD */
at91_set_a_periph(AT91_PIO_PORTA, 22, 1); /* DTXD */
- writel(1 << AT91_ID_SYS, &pmc->pcer);
+ writel(1 << ATMEL_ID_SYS, &pmc->pcer);
}
-void at91_serial_hw_init(void)
-{
-#ifdef CONFIG_USART0
- at91_serial0_hw_init();
-#endif
-
-#ifdef CONFIG_USART1
- at91_serial1_hw_init();
-#endif
-
-#ifdef CONFIG_USART2
- at91_serial2_hw_init();
-#endif
-
-#ifdef CONFIG_USART3 /* DBGU */
- at91_serial3_hw_init();
-#endif
-}
-
-#ifdef CONFIG_HAS_DATAFLASH
+#if defined(CONFIG_HAS_DATAFLASH) || defined(CONFIG_ATMEL_SPI)
void at91_spi0_hw_init(unsigned long cs_mask)
{
- at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
+ at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
- at91_set_a_periph(AT91_PIO_PORTA, 25, 0); /* SPI0_MISO */
- at91_set_a_periph(AT91_PIO_PORTA, 26, 0); /* SPI0_MOSI */
- at91_set_a_periph(AT91_PIO_PORTA, 27, 0); /* SPI0_SPCK */
+ at91_set_a_periph(AT91_PIO_PORTA, 25, PUP); /* SPI0_MISO */
+ at91_set_a_periph(AT91_PIO_PORTA, 26, PUP); /* SPI0_MOSI */
+ at91_set_a_periph(AT91_PIO_PORTA, 27, PUP); /* SPI0_SPCK */
/* Enable clock */
- writel(1 << AT91SAM9RL_ID_SPI, &pmc->pcer);
+ writel(1 << ATMEL_ID_SPI, &pmc->pcer);
if (cs_mask & (1 << 0)) {
at91_set_a_periph(AT91_PIO_PORTA, 28, 1);
diff --git a/arch/arm/cpu/arm926ejs/at91/lowlevel_init.S b/arch/arm/cpu/arm926ejs/at91/lowlevel_init.S
index 17ff0dd..d102195 100644
--- a/arch/arm/cpu/arm926ejs/at91/lowlevel_init.S
+++ b/arch/arm/cpu/arm926ejs/at91/lowlevel_init.S
@@ -35,7 +35,7 @@
#include <asm/arch/at91sam9_sdramc.h>
#include <asm/arch/at91sam9_smc.h>
#include <asm/arch/at91_rstc.h>
-#ifdef CONFIG_AT91_LEGACY
+#ifdef CONFIG_ATMEL_LEGACY
#include <asm/arch/at91sam9_matrix.h>
#endif
#ifndef CONFIG_SYS_MATRIX_EBICSA_VAL
diff --git a/arch/arm/cpu/arm926ejs/mb86r0x/Makefile b/arch/arm/cpu/arm926ejs/mb86r0x/Makefile
index bab048b..974d0be 100644
--- a/arch/arm/cpu/arm926ejs/mb86r0x/Makefile
+++ b/arch/arm/cpu/arm926ejs/mb86r0x/Makefile
@@ -37,6 +37,8 @@
$(LIB): $(OBJS)
$(call cmd_link_o_target, $(OBJS))
+$(OBJS) : $(TOPDIR)/include/asm/arch/asm-offsets.h
+
#########################################################################
# defines $(obj).depend target
diff --git a/arch/arm/cpu/arm926ejs/mb86r0x/asm-offsets.c b/arch/arm/cpu/arm926ejs/mb86r0x/asm-offsets.c
new file mode 100644
index 0000000..6f9c722
--- /dev/null
+++ b/arch/arm/cpu/arm926ejs/mb86r0x/asm-offsets.c
@@ -0,0 +1,65 @@
+/*
+ * Adapted from Linux v2.6.36 kernel: arch/powerpc/kernel/asm-offsets.c
+ *
+ * This program is used to generate definitions needed by
+ * assembly language modules.
+ *
+ * We use the technique used in the OSF Mach kernel code:
+ * generate asm statements containing #defines,
+ * compile this file to assembler, and then extract the
+ * #defines from the assembly-language output.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <common.h>
+#include <asm/arch/mb86r0x.h>
+
+#include <linux/kbuild.h>
+
+int main(void)
+{
+ /* ddr2 controller */
+ DEFINE(DDR2_DRIC, offsetof(struct mb86r0x_ddr2c, dric));
+ DEFINE(DDR2_DRIC1, offsetof(struct mb86r0x_ddr2c, dric1));
+ DEFINE(DDR2_DRIC2, offsetof(struct mb86r0x_ddr2c, dric2));
+ DEFINE(DDR2_DRCA, offsetof(struct mb86r0x_ddr2c, drca));
+ DEFINE(DDR2_DRCM, offsetof(struct mb86r0x_ddr2c, drcm));
+ DEFINE(DDR2_DRCST1, offsetof(struct mb86r0x_ddr2c, drcst1));
+ DEFINE(DDR2_DRCST2, offsetof(struct mb86r0x_ddr2c, drcst2));
+ DEFINE(DDR2_DRCR, offsetof(struct mb86r0x_ddr2c, drcr));
+ DEFINE(DDR2_DRCF, offsetof(struct mb86r0x_ddr2c, drcf));
+ DEFINE(DDR2_DRASR, offsetof(struct mb86r0x_ddr2c, drasr));
+ DEFINE(DDR2_DRIMS, offsetof(struct mb86r0x_ddr2c, drims));
+ DEFINE(DDR2_DROS, offsetof(struct mb86r0x_ddr2c, dros));
+ DEFINE(DDR2_DRIBSODT1, offsetof(struct mb86r0x_ddr2c, dribsodt1));
+ DEFINE(DDR2_DROABA, offsetof(struct mb86r0x_ddr2c, droaba));
+ DEFINE(DDR2_DROBS, offsetof(struct mb86r0x_ddr2c, drobs));
+
+ /* clock reset generator */
+ DEFINE(CRG_CRPR, offsetof(struct mb86r0x_crg, crpr));
+ DEFINE(CRG_CRHA, offsetof(struct mb86r0x_crg, crha));
+ DEFINE(CRG_CRPA, offsetof(struct mb86r0x_crg, crpa));
+ DEFINE(CRG_CRPB, offsetof(struct mb86r0x_crg, crpb));
+ DEFINE(CRG_CRHB, offsetof(struct mb86r0x_crg, crhb));
+ DEFINE(CRG_CRAM, offsetof(struct mb86r0x_crg, cram));
+
+ /* chip control module */
+ DEFINE(CCNT_CDCRC, offsetof(struct mb86r0x_ccnt, cdcrc));
+
+ /* external bus interface */
+ DEFINE(MEMC_MCFMODE0, offsetof(struct mb86r0x_memc, mcfmode[0]));
+ DEFINE(MEMC_MCFMODE2, offsetof(struct mb86r0x_memc, mcfmode[2]));
+ DEFINE(MEMC_MCFMODE4, offsetof(struct mb86r0x_memc, mcfmode[4]));
+ DEFINE(MEMC_MCFTIM0, offsetof(struct mb86r0x_memc, mcftim[0]));
+ DEFINE(MEMC_MCFTIM2, offsetof(struct mb86r0x_memc, mcftim[2]));
+ DEFINE(MEMC_MCFTIM4, offsetof(struct mb86r0x_memc, mcftim[4]));
+ DEFINE(MEMC_MCFAREA0, offsetof(struct mb86r0x_memc, mcfarea[0]));
+ DEFINE(MEMC_MCFAREA2, offsetof(struct mb86r0x_memc, mcfarea[2]));
+ DEFINE(MEMC_MCFAREA4, offsetof(struct mb86r0x_memc, mcfarea[4]));
+
+ return 0;
+}
diff --git a/arch/arm/cpu/armv7/Makefile b/arch/arm/cpu/armv7/Makefile
index 299792a..92a5a96 100644
--- a/arch/arm/cpu/armv7/Makefile
+++ b/arch/arm/cpu/armv7/Makefile
@@ -26,7 +26,12 @@
LIB = $(obj)lib$(CPU).o
START := start.o
-COBJS := cpu.o cache_v7.o
+
+ifndef CONFIG_SPL_BUILD
+COBJS += cache_v7.o
+COBJS += cpu.o
+endif
+
COBJS += syslib.o
SRCS := $(START:.o=.S) $(COBJS:.o=.c)
diff --git a/arch/arm/cpu/armv7/cpu.c b/arch/arm/cpu/armv7/cpu.c
index def9ced..091e3e0 100644
--- a/arch/arm/cpu/armv7/cpu.c
+++ b/arch/arm/cpu/armv7/cpu.c
@@ -37,6 +37,13 @@
#include <asm/cache.h>
#include <asm/armv7.h>
+void save_boot_params_default(u32 r0, u32 r1, u32 r2, u32 r3)
+{
+}
+
+void save_boot_params(u32 r0, u32 r1, u32 r2, u32 r3)
+ __attribute__((weak, alias("save_boot_params_default")));
+
int cleanup_before_linux(void)
{
/*
diff --git a/arch/arm/cpu/armv7/omap-common/Makefile b/arch/arm/cpu/armv7/omap-common/Makefile
index dc01ee5..ea9f8ec 100644
--- a/arch/arm/cpu/armv7/omap-common/Makefile
+++ b/arch/arm/cpu/armv7/omap-common/Makefile
@@ -28,6 +28,12 @@
SOBJS := reset.o
COBJS := timer.o
+COBJS += utils.o
+COBJS += gpio.o
+
+ifdef CONFIG_SPL_BUILD
+COBJS += spl.o
+endif
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
diff --git a/arch/arm/cpu/armv7/omap3/gpio.c b/arch/arm/cpu/armv7/omap-common/gpio.c
similarity index 76%
rename from arch/arm/cpu/armv7/omap3/gpio.c
rename to arch/arm/cpu/armv7/omap-common/gpio.c
index aeb6066..f4c3479 100644
--- a/arch/arm/cpu/armv7/omap3/gpio.c
+++ b/arch/arm/cpu/armv7/omap-common/gpio.c
@@ -36,24 +36,13 @@
* published by the Free Software Foundation.
*/
#include <common.h>
-#include <asm/arch/gpio.h>
+#include <asm/omap_gpio.h>
#include <asm/io.h>
#include <asm/errno.h>
-static struct gpio_bank gpio_bank_34xx[6] = {
- { (void *)OMAP34XX_GPIO1_BASE, METHOD_GPIO_24XX },
- { (void *)OMAP34XX_GPIO2_BASE, METHOD_GPIO_24XX },
- { (void *)OMAP34XX_GPIO3_BASE, METHOD_GPIO_24XX },
- { (void *)OMAP34XX_GPIO4_BASE, METHOD_GPIO_24XX },
- { (void *)OMAP34XX_GPIO5_BASE, METHOD_GPIO_24XX },
- { (void *)OMAP34XX_GPIO6_BASE, METHOD_GPIO_24XX },
-};
-
-static struct gpio_bank *gpio_bank = &gpio_bank_34xx[0];
-
-static inline struct gpio_bank *get_gpio_bank(int gpio)
+static inline const struct gpio_bank *get_gpio_bank(int gpio)
{
- return &gpio_bank[gpio >> 5];
+ return &omap_gpio_bank[gpio >> 5];
}
static inline int get_gpio_index(int gpio)
@@ -79,14 +68,15 @@
return 0;
}
-static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input)
+static void _set_gpio_direction(const struct gpio_bank *bank, int gpio,
+ int is_input)
{
void *reg = bank->base;
u32 l;
switch (bank->method) {
case METHOD_GPIO_24XX:
- reg += OMAP24XX_GPIO_OE;
+ reg += OMAP_GPIO_OE;
break;
default:
return;
@@ -101,7 +91,7 @@
void omap_set_gpio_direction(int gpio, int is_input)
{
- struct gpio_bank *bank;
+ const struct gpio_bank *bank;
if (check_gpio(gpio) < 0)
return;
@@ -109,7 +99,8 @@
_set_gpio_direction(bank, get_gpio_index(gpio), is_input);
}
-static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
+static void _set_gpio_dataout(const struct gpio_bank *bank, int gpio,
+ int enable)
{
void *reg = bank->base;
u32 l = 0;
@@ -117,9 +108,9 @@
switch (bank->method) {
case METHOD_GPIO_24XX:
if (enable)
- reg += OMAP24XX_GPIO_SETDATAOUT;
+ reg += OMAP_GPIO_SETDATAOUT;
else
- reg += OMAP24XX_GPIO_CLEARDATAOUT;
+ reg += OMAP_GPIO_CLEARDATAOUT;
l = 1 << gpio;
break;
default:
@@ -132,7 +123,7 @@
void omap_set_gpio_dataout(int gpio, int enable)
{
- struct gpio_bank *bank;
+ const struct gpio_bank *bank;
if (check_gpio(gpio) < 0)
return;
@@ -142,7 +133,7 @@
int omap_get_gpio_datain(int gpio)
{
- struct gpio_bank *bank;
+ const struct gpio_bank *bank;
void *reg;
if (check_gpio(gpio) < 0)
@@ -151,7 +142,7 @@
reg = bank->base;
switch (bank->method) {
case METHOD_GPIO_24XX:
- reg += OMAP24XX_GPIO_DATAIN;
+ reg += OMAP_GPIO_DATAIN;
break;
default:
return -EINVAL;
@@ -160,7 +151,7 @@
& (1 << get_gpio_index(gpio))) != 0;
}
-static void _reset_gpio(struct gpio_bank *bank, int gpio)
+static void _reset_gpio(const struct gpio_bank *bank, int gpio)
{
_set_gpio_direction(bank, get_gpio_index(gpio), 1);
}
@@ -175,7 +166,7 @@
void omap_free_gpio(int gpio)
{
- struct gpio_bank *bank;
+ const struct gpio_bank *bank;
if (check_gpio(gpio) < 0)
return;
diff --git a/arch/arm/cpu/armv7/omap-common/spl.c b/arch/arm/cpu/armv7/omap-common/spl.c
new file mode 100644
index 0000000..d177652
--- /dev/null
+++ b/arch/arm/cpu/armv7/omap-common/spl.c
@@ -0,0 +1,272 @@
+/*
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ *
+ * Aneesh V <aneesh@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <asm/u-boot.h>
+#include <asm/utils.h>
+#include <asm/arch/sys_proto.h>
+#include <mmc.h>
+#include <fat.h>
+#include <timestamp_autogenerated.h>
+#include <version_autogenerated.h>
+#include <asm/omap_common.h>
+#include <asm/arch/mmc_host_def.h>
+#include <i2c.h>
+#include <image.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* Define global data structure pointer to it*/
+static gd_t gdata __attribute__ ((section(".data")));
+static bd_t bdata __attribute__ ((section(".data")));
+static const char *image_name;
+static u8 image_os;
+static u32 image_load_addr;
+static u32 image_entry_point;
+static u32 image_size;
+
+inline void hang(void)
+{
+ puts("### ERROR ### Please RESET the board ###\n");
+ for (;;)
+ ;
+}
+
+void board_init_f(ulong dummy)
+{
+ /*
+ * We call relocate_code() with relocation target same as the
+ * CONFIG_SYS_SPL_TEXT_BASE. This will result in relocation getting
+ * skipped. Instead, only .bss initialization will happen. That's
+ * all we need
+ */
+ debug(">>board_init_f()\n");
+ relocate_code(CONFIG_SPL_STACK, &gdata, CONFIG_SPL_TEXT_BASE);
+}
+
+#ifdef CONFIG_GENERIC_MMC
+int board_mmc_init(bd_t *bis)
+{
+ switch (omap_boot_device()) {
+ case BOOT_DEVICE_MMC1:
+ omap_mmc_init(0);
+ break;
+ case BOOT_DEVICE_MMC2:
+ omap_mmc_init(1);
+ break;
+ }
+ return 0;
+}
+#endif
+
+static void parse_image_header(const struct image_header *header)
+{
+ u32 header_size = sizeof(struct image_header);
+
+ if (__be32_to_cpu(header->ih_magic) == IH_MAGIC) {
+ image_size = __be32_to_cpu(header->ih_size) + header_size;
+ image_entry_point = __be32_to_cpu(header->ih_load);
+ /* Load including the header */
+ image_load_addr = image_entry_point - header_size;
+ image_os = header->ih_os;
+ image_name = (const char *)&header->ih_name;
+ debug("spl: payload image: %s load addr: 0x%x size: %d\n",
+ image_name, image_load_addr, image_size);
+ } else {
+ /* Signature not found - assume u-boot.bin */
+ printf("mkimage signature not found - ih_magic = %x\n",
+ header->ih_magic);
+ puts("Assuming u-boot.bin ..\n");
+ /* Let's assume U-Boot will not be more than 200 KB */
+ image_size = 200 * 1024;
+ image_entry_point = CONFIG_SYS_TEXT_BASE;
+ image_load_addr = CONFIG_SYS_TEXT_BASE;
+ image_os = IH_OS_U_BOOT;
+ image_name = "U-Boot";
+ }
+}
+
+static void mmc_load_image_raw(struct mmc *mmc)
+{
+ u32 image_size_sectors, err;
+ const struct image_header *header;
+
+ header = (struct image_header *)(CONFIG_SYS_TEXT_BASE -
+ sizeof(struct image_header));
+
+ /* read image header to find the image size & load address */
+ err = mmc->block_dev.block_read(0,
+ CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR, 1,
+ (void *)header);
+
+ if (err <= 0)
+ goto end;
+
+ parse_image_header(header);
+
+ /* convert size to sectors - round up */
+ image_size_sectors = (image_size + MMCSD_SECTOR_SIZE - 1) /
+ MMCSD_SECTOR_SIZE;
+
+ /* Read the header too to avoid extra memcpy */
+ err = mmc->block_dev.block_read(0,
+ CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR,
+ image_size_sectors, (void *)image_load_addr);
+
+end:
+ if (err <= 0) {
+ printf("spl: mmc blk read err - %d\n", err);
+ hang();
+ }
+}
+
+static void mmc_load_image_fat(struct mmc *mmc)
+{
+ s32 err;
+ struct image_header *header;
+
+ header = (struct image_header *)(CONFIG_SYS_TEXT_BASE -
+ sizeof(struct image_header));
+
+ err = fat_register_device(&mmc->block_dev,
+ CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION);
+ if (err) {
+ printf("spl: fat register err - %d\n", err);
+ hang();
+ }
+
+ err = file_fat_read(CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME,
+ (u8 *)header, sizeof(struct image_header));
+ if (err <= 0)
+ goto end;
+
+ parse_image_header(header);
+
+ err = file_fat_read(CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME,
+ (u8 *)image_load_addr, 0);
+
+end:
+ if (err <= 0) {
+ printf("spl: error reading image %s, err - %d\n",
+ CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME, err);
+ hang();
+ }
+}
+
+static void mmc_load_image(void)
+{
+ struct mmc *mmc;
+ int err;
+ u32 boot_mode;
+
+ mmc_initialize(gd->bd);
+ /* We register only one device. So, the dev id is always 0 */
+ mmc = find_mmc_device(0);
+ if (!mmc) {
+ puts("spl: mmc device not found!!\n");
+ hang();
+ }
+
+ err = mmc_init(mmc);
+ if (err) {
+ printf("spl: mmc init failed: err - %d\n", err);
+ hang();
+ }
+
+ boot_mode = omap_boot_mode();
+ if (boot_mode == MMCSD_MODE_RAW) {
+ debug("boot mode - RAW\n");
+ mmc_load_image_raw(mmc);
+ } else if (boot_mode == MMCSD_MODE_FAT) {
+ debug("boot mode - FAT\n");
+ mmc_load_image_fat(mmc);
+ } else {
+ puts("spl: wrong MMC boot mode\n");
+ hang();
+ }
+}
+
+void jump_to_image_no_args(void)
+{
+ typedef void (*image_entry_noargs_t)(void)__attribute__ ((noreturn));
+ image_entry_noargs_t image_entry =
+ (image_entry_noargs_t) image_entry_point;
+
+ image_entry();
+}
+
+void jump_to_image_no_args(void) __attribute__ ((noreturn));
+void board_init_r(gd_t *id, ulong dummy)
+{
+ u32 boot_device;
+ debug(">>spl:board_init_r()\n");
+
+ timer_init();
+ i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+
+ boot_device = omap_boot_device();
+ debug("boot device - %d\n", boot_device);
+ switch (boot_device) {
+ case BOOT_DEVICE_MMC1:
+ case BOOT_DEVICE_MMC2:
+ mmc_load_image();
+ break;
+ default:
+ printf("SPL: Un-supported Boot Device - %d!!!\n", boot_device);
+ hang();
+ break;
+ }
+
+ switch (image_os) {
+ case IH_OS_U_BOOT:
+ debug("Jumping to U-Boot\n");
+ jump_to_image_no_args();
+ break;
+ default:
+ puts("Unsupported OS image.. Jumping nevertheless..\n");
+ jump_to_image_no_args();
+ }
+}
+
+void preloader_console_init(void)
+{
+ const char *u_boot_rev = U_BOOT_VERSION;
+ char rev_string_buffer[50];
+
+ gd = &gdata;
+ gd->bd = &bdata;
+ gd->flags |= GD_FLG_RELOC;
+ gd->baudrate = CONFIG_BAUDRATE;
+
+ setup_clocks_for_console();
+ serial_init(); /* serial communications setup */
+
+ /* Avoid a second "U-Boot" coming from this string */
+ u_boot_rev = &u_boot_rev[7];
+
+ printf("\nU-Boot SPL %s (%s - %s)\n", u_boot_rev, U_BOOT_DATE,
+ U_BOOT_TIME);
+ omap_rev_string(rev_string_buffer);
+ printf("Texas Instruments %s\n", rev_string_buffer);
+}
diff --git a/arch/arm/cpu/armv7/omap-common/u-boot-spl.lds b/arch/arm/cpu/armv7/omap-common/u-boot-spl.lds
new file mode 100644
index 0000000..8867e06
--- /dev/null
+++ b/arch/arm/cpu/armv7/omap-common/u-boot-spl.lds
@@ -0,0 +1,62 @@
+/*
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
+ *
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ * Aneesh V <aneesh@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+MEMORY { .sram : ORIGIN = CONFIG_SPL_TEXT_BASE,\
+ LENGTH = CONFIG_SPL_MAX_SIZE }
+MEMORY { .sdram : ORIGIN = CONFIG_SPL_BSS_START_ADDR, \
+ LENGTH = CONFIG_SPL_BSS_MAX_SIZE }
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+ .text :
+ {
+ __start = .;
+ arch/arm/cpu/armv7/start.o (.text)
+ *(.text*)
+ } >.sram
+
+ . = ALIGN(4);
+ .rodata : { *(SORT_BY_ALIGNMENT(.rodata*)) } >.sram
+
+ . = ALIGN(4);
+ .data : { *(SORT_BY_ALIGNMENT(.data*)) } >.sram
+ . = ALIGN(4);
+ __image_copy_end = .;
+ _end = .;
+
+ .bss :
+ {
+ . = ALIGN(4);
+ __bss_start = .;
+ *(.bss*)
+ . = ALIGN(4);
+ __bss_end__ = .;
+ } >.sdram
+}
diff --git a/arch/arm/cpu/armv7/omap-common/utils.c b/arch/arm/cpu/armv7/omap-common/utils.c
new file mode 100644
index 0000000..ea935da
--- /dev/null
+++ b/arch/arm/cpu/armv7/omap-common/utils.c
@@ -0,0 +1,57 @@
+/*
+ * Copyright 2011 Linaro Limited
+ * Aneesh V <aneesh@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+static void do_cancel_out(u32 *num, u32 *den, u32 factor)
+{
+ while (1) {
+ if (((*num)/factor*factor == (*num)) &&
+ ((*den)/factor*factor == (*den))) {
+ (*num) /= factor;
+ (*den) /= factor;
+ } else
+ break;
+ }
+}
+
+/*
+ * Cancel out the denominator and numerator of a fraction
+ * to get smaller numerator and denominator.
+ */
+void cancel_out(u32 *num, u32 *den, u32 den_limit)
+{
+ do_cancel_out(num, den, 2);
+ do_cancel_out(num, den, 3);
+ do_cancel_out(num, den, 5);
+ do_cancel_out(num, den, 7);
+ do_cancel_out(num, den, 11);
+ do_cancel_out(num, den, 13);
+ do_cancel_out(num, den, 17);
+ while ((*den) > den_limit) {
+ *num /= 2;
+ /*
+ * Round up the denominator so that the final fraction
+ * (num/den) is always <= the desired value
+ */
+ *den = (*den + 1) / 2;
+ }
+}
diff --git a/arch/arm/cpu/armv7/omap3/Makefile b/arch/arm/cpu/armv7/omap3/Makefile
index 522bcd2..8e85891 100644
--- a/arch/arm/cpu/armv7/omap3/Makefile
+++ b/arch/arm/cpu/armv7/omap3/Makefile
@@ -29,7 +29,6 @@
COBJS += board.o
COBJS += clock.o
-COBJS += gpio.o
COBJS += mem.o
COBJS += sys_info.o
diff --git a/arch/arm/cpu/armv7/omap3/board.c b/arch/arm/cpu/armv7/omap3/board.c
index 98519a9..4aaf97b 100644
--- a/arch/arm/cpu/armv7/omap3/board.c
+++ b/arch/arm/cpu/armv7/omap3/board.c
@@ -38,12 +38,24 @@
#include <asm/arch/mem.h>
#include <asm/cache.h>
#include <asm/armv7.h>
+#include <asm/omap_gpio.h>
/* Declarations */
extern omap3_sysinfo sysinfo;
static void omap3_setup_aux_cr(void);
static void omap3_invalidate_l2_cache_secure(void);
+static const struct gpio_bank gpio_bank_34xx[6] = {
+ { (void *)OMAP34XX_GPIO1_BASE, METHOD_GPIO_24XX },
+ { (void *)OMAP34XX_GPIO2_BASE, METHOD_GPIO_24XX },
+ { (void *)OMAP34XX_GPIO3_BASE, METHOD_GPIO_24XX },
+ { (void *)OMAP34XX_GPIO4_BASE, METHOD_GPIO_24XX },
+ { (void *)OMAP34XX_GPIO5_BASE, METHOD_GPIO_24XX },
+ { (void *)OMAP34XX_GPIO6_BASE, METHOD_GPIO_24XX },
+};
+
+const struct gpio_bank *const omap_gpio_bank = gpio_bank_34xx;
+
/******************************************************************************
* Routine: delay
* Description: spinning delay to use before udelay works
diff --git a/arch/arm/cpu/armv7/omap3/sys_info.c b/arch/arm/cpu/armv7/omap3/sys_info.c
index 549ac19..8d0496c 100644
--- a/arch/arm/cpu/armv7/omap3/sys_info.c
+++ b/arch/arm/cpu/armv7/omap3/sys_info.c
@@ -33,6 +33,8 @@
extern omap3_sysinfo sysinfo;
static struct ctrl *ctrl_base = (struct ctrl *)OMAP34XX_CTRL_BASE;
+
+#ifdef CONFIG_DISPLAY_CPUINFO
static char *rev_s[CPU_3XX_MAX_REV] = {
"1.0",
"2.0",
@@ -42,6 +44,7 @@
"UNKNOWN",
"UNKNOWN",
"3.1.2"};
+#endif /* CONFIG_DISPLAY_CPUINFO */
/*****************************************************************
* dieid_num_r(void) - read and set die ID
diff --git a/arch/arm/cpu/armv7/omap4/Makefile b/arch/arm/cpu/armv7/omap4/Makefile
index 987dc9d..e7ee0b8 100644
--- a/arch/arm/cpu/armv7/omap4/Makefile
+++ b/arch/arm/cpu/armv7/omap4/Makefile
@@ -28,8 +28,14 @@
SOBJS += lowlevel_init.o
COBJS += board.o
+COBJS += clocks.o
+COBJS += emif.o
+COBJS += sdram_elpida.o
+
+ifndef CONFIG_SPL_BUILD
COBJS += mem.o
COBJS += sys_info.o
+endif
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS))
diff --git a/arch/arm/cpu/armv7/omap4/board.c b/arch/arm/cpu/armv7/omap4/board.c
index de4cc2a..5943d61 100644
--- a/arch/arm/cpu/armv7/omap4/board.c
+++ b/arch/arm/cpu/armv7/omap4/board.c
@@ -28,20 +28,181 @@
* MA 02111-1307 USA
*/
#include <common.h>
+#include <asm/armv7.h>
#include <asm/arch/cpu.h>
#include <asm/arch/sys_proto.h>
#include <asm/sizes.h>
+#include <asm/arch/emif.h>
+#include <asm/omap_gpio.h>
+#include "omap4_mux_data.h"
DECLARE_GLOBAL_DATA_PTR;
+u32 *const omap4_revision = (u32 *)OMAP4_SRAM_SCRATCH_OMAP4_REV;
+
+static const struct gpio_bank gpio_bank_44xx[6] = {
+ { (void *)OMAP44XX_GPIO1_BASE, METHOD_GPIO_24XX },
+ { (void *)OMAP44XX_GPIO2_BASE, METHOD_GPIO_24XX },
+ { (void *)OMAP44XX_GPIO3_BASE, METHOD_GPIO_24XX },
+ { (void *)OMAP44XX_GPIO4_BASE, METHOD_GPIO_24XX },
+ { (void *)OMAP44XX_GPIO5_BASE, METHOD_GPIO_24XX },
+ { (void *)OMAP44XX_GPIO6_BASE, METHOD_GPIO_24XX },
+};
+
+const struct gpio_bank *const omap_gpio_bank = gpio_bank_44xx;
+
+#ifdef CONFIG_SPL_BUILD
+/*
+ * We use static variables because global data is not ready yet.
+ * Initialized data is available in SPL right from the beginning.
+ * We would not typically need to save these parameters in regular
+ * U-Boot. This is needed only in SPL at the moment.
+ */
+u32 omap4_boot_device = BOOT_DEVICE_MMC1;
+u32 omap4_boot_mode = MMCSD_MODE_FAT;
+
+u32 omap_boot_device(void)
+{
+ return omap4_boot_device;
+}
+
+u32 omap_boot_mode(void)
+{
+ return omap4_boot_mode;
+}
+#endif
+
+void do_set_mux(u32 base, struct pad_conf_entry const *array, int size)
+{
+ int i;
+ struct pad_conf_entry *pad = (struct pad_conf_entry *) array;
+
+ for (i = 0; i < size; i++, pad++)
+ writew(pad->val, base + pad->offset);
+}
+
+static void set_muxconf_regs_essential(void)
+{
+ do_set_mux(CONTROL_PADCONF_CORE, core_padconf_array_essential,
+ sizeof(core_padconf_array_essential) /
+ sizeof(struct pad_conf_entry));
+
+ do_set_mux(CONTROL_PADCONF_WKUP, wkup_padconf_array_essential,
+ sizeof(wkup_padconf_array_essential) /
+ sizeof(struct pad_conf_entry));
+
+ /* gpio_wk7 is used for controlling TPS on 4460 */
+ if (omap_revision() >= OMAP4460_ES1_0)
+ writew(M3, CONTROL_WKUP_PAD1_FREF_CLK4_REQ);
+}
+
+static void set_mux_conf_regs(void)
+{
+ switch (omap4_hw_init_context()) {
+ case OMAP_INIT_CONTEXT_SPL:
+ set_muxconf_regs_essential();
+ break;
+ case OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL:
+ set_muxconf_regs_non_essential();
+ break;
+ case OMAP_INIT_CONTEXT_UBOOT_FROM_NOR:
+ case OMAP_INIT_CONTEXT_UBOOT_AFTER_CH:
+ set_muxconf_regs_essential();
+ set_muxconf_regs_non_essential();
+ break;
+ }
+}
+
+static u32 cortex_a9_rev(void)
+{
+
+ unsigned int rev;
+
+ /* Read Main ID Register (MIDR) */
+ asm ("mrc p15, 0, %0, c0, c0, 0" : "=r" (rev));
+
+ return rev;
+}
+
+static void init_omap4_revision(void)
+{
+ /*
+ * For some of the ES2/ES1 boards ID_CODE is not reliable:
+ * Also, ES1 and ES2 have different ARM revisions
+ * So use ARM revision for identification
+ */
+ unsigned int arm_rev = cortex_a9_rev();
+
+ switch (arm_rev) {
+ case MIDR_CORTEX_A9_R0P1:
+ *omap4_revision = OMAP4430_ES1_0;
+ break;
+ case MIDR_CORTEX_A9_R1P2:
+ switch (readl(CONTROL_ID_CODE)) {
+ case OMAP4_CONTROL_ID_CODE_ES2_0:
+ *omap4_revision = OMAP4430_ES2_0;
+ break;
+ case OMAP4_CONTROL_ID_CODE_ES2_1:
+ *omap4_revision = OMAP4430_ES2_1;
+ break;
+ case OMAP4_CONTROL_ID_CODE_ES2_2:
+ *omap4_revision = OMAP4430_ES2_2;
+ break;
+ default:
+ *omap4_revision = OMAP4430_ES2_0;
+ break;
+ }
+ break;
+ case MIDR_CORTEX_A9_R1P3:
+ *omap4_revision = OMAP4430_ES2_3;
+ break;
+ case MIDR_CORTEX_A9_R2P10:
+ *omap4_revision = OMAP4460_ES1_0;
+ break;
+ default:
+ *omap4_revision = OMAP4430_SILICON_ID_INVALID;
+ break;
+ }
+}
+
+void omap_rev_string(char *omap4_rev_string)
+{
+ u32 omap4_rev = omap_revision();
+ u32 omap4_variant = (omap4_rev & 0xFFFF0000) >> 16;
+ u32 major_rev = (omap4_rev & 0x00000F00) >> 8;
+ u32 minor_rev = (omap4_rev & 0x000000F0) >> 4;
+
+ sprintf(omap4_rev_string, "OMAP%x ES%x.%x", omap4_variant, major_rev,
+ minor_rev);
+}
+
/*
* Routine: s_init
- * Description: Does early system init of muxing and clocks.
- * - Called path is with SRAM stack.
+ * Description: Does early system init of watchdog, muxing, andclocks
+ * Watchdog disable is done always. For the rest what gets done
+ * depends on the boot mode in which this function is executed
+ * 1. s_init of SPL running from SRAM
+ * 2. s_init of U-Boot running from FLASH
+ * 3. s_init of U-Boot loaded to SDRAM by SPL
+ * 4. s_init of U-Boot loaded to SDRAM by ROM code using the
+ * Configuration Header feature
+ * Please have a look at the respective functions to see what gets
+ * done in each of these cases
+ * This function is called with SRAM stack.
*/
void s_init(void)
{
+ init_omap4_revision();
watchdog_init();
+ set_mux_conf_regs();
+#ifdef CONFIG_SPL_BUILD
+ preloader_console_init();
+#endif
+ prcm_init();
+#ifdef CONFIG_SPL_BUILD
+ /* For regular u-boot sdram_init() is called from dram_init() */
+ sdram_init();
+#endif
}
/*
@@ -76,17 +237,17 @@
* This is needed because the size of memory installed may be
* different on different versions of the board
*/
-u32 sdram_size(void)
+u32 omap4_sdram_size(void)
{
u32 section, i, total_size = 0, size, addr;
for (i = 0; i < 4; i++) {
- section = __raw_readl(DMM_LISA_MAP_BASE + i*4);
- addr = section & DMM_LISA_MAP_SYS_ADDR_MASK;
+ section = __raw_readl(OMAP44XX_DMM_LISA_MAP_BASE + i*4);
+ addr = section & OMAP44XX_SYS_ADDR_MASK;
/* See if the address is valid */
if ((addr >= OMAP44XX_DRAM_ADDR_SPACE_START) &&
(addr < OMAP44XX_DRAM_ADDR_SPACE_END)) {
- size = ((section & DMM_LISA_MAP_SYS_SIZE_MASK) >>
- DMM_LISA_MAP_SYS_SIZE_SHIFT);
+ size = ((section & OMAP44XX_SYS_SIZE_MASK) >>
+ OMAP44XX_SYS_SIZE_SHIFT);
size = 1 << size;
size *= SZ_16M;
total_size += size;
@@ -102,8 +263,8 @@
*/
int dram_init(void)
{
-
- gd->ram_size = sdram_size();
+ sdram_init();
+ gd->ram_size = omap4_sdram_size();
return 0;
}
@@ -124,7 +285,6 @@
*/
int arch_cpu_init(void)
{
- set_muxconf_regs();
return 0;
}
diff --git a/arch/arm/cpu/armv7/omap4/clocks.c b/arch/arm/cpu/armv7/omap4/clocks.c
new file mode 100644
index 0000000..eda960c
--- /dev/null
+++ b/arch/arm/cpu/armv7/omap4/clocks.c
@@ -0,0 +1,940 @@
+/*
+ *
+ * Clock initialization for OMAP4
+ *
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ *
+ * Aneesh V <aneesh@ti.com>
+ *
+ * Based on previous work by:
+ * Santosh Shilimkar <santosh.shilimkar@ti.com>
+ * Rajendra Nayak <rnayak@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <asm/omap_common.h>
+#include <asm/arch/clocks.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/utils.h>
+#include <asm/omap_gpio.h>
+
+#ifndef CONFIG_SPL_BUILD
+/*
+ * printing to console doesn't work unless
+ * this code is executed from SPL
+ */
+#define printf(fmt, args...)
+#define puts(s)
+#endif
+
+#define abs(x) (((x) < 0) ? ((x)*-1) : (x))
+
+struct omap4_prcm_regs *const prcm = (struct omap4_prcm_regs *)0x4A004100;
+
+static const u32 sys_clk_array[8] = {
+ 12000000, /* 12 MHz */
+ 13000000, /* 13 MHz */
+ 16800000, /* 16.8 MHz */
+ 19200000, /* 19.2 MHz */
+ 26000000, /* 26 MHz */
+ 27000000, /* 27 MHz */
+ 38400000, /* 38.4 MHz */
+};
+
+/*
+ * The M & N values in the following tables are created using the
+ * following tool:
+ * tools/omap/clocks_get_m_n.c
+ * Please use this tool for creating the table for any new frequency.
+ */
+
+/* dpll locked at 1840 MHz MPU clk at 920 MHz(OPP Turbo 4460) - DCC OFF */
+static const struct dpll_params mpu_dpll_params_1840mhz[NUM_SYS_CLKS] = {
+ {230, 2, 1, -1, -1, -1, -1, -1}, /* 12 MHz */
+ {920, 12, 1, -1, -1, -1, -1, -1}, /* 13 MHz */
+ {219, 3, 1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
+ {575, 11, 1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
+ {460, 12, 1, -1, -1, -1, -1, -1}, /* 26 MHz */
+ {920, 26, 1, -1, -1, -1, -1, -1}, /* 27 MHz */
+ {575, 23, 1, -1, -1, -1, -1, -1} /* 38.4 MHz */
+};
+
+/* dpll locked at 1584 MHz - MPU clk at 792 MHz(OPP Turbo 4430) */
+static const struct dpll_params mpu_dpll_params_1584mhz[NUM_SYS_CLKS] = {
+ {66, 0, 1, -1, -1, -1, -1, -1}, /* 12 MHz */
+ {792, 12, 1, -1, -1, -1, -1, -1}, /* 13 MHz */
+ {330, 6, 1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
+ {165, 3, 1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
+ {396, 12, 1, -1, -1, -1, -1, -1}, /* 26 MHz */
+ {88, 2, 1, -1, -1, -1, -1, -1}, /* 27 MHz */
+ {165, 7, 1, -1, -1, -1, -1, -1} /* 38.4 MHz */
+};
+
+/* dpll locked at 1200 MHz - MPU clk at 600 MHz */
+static const struct dpll_params mpu_dpll_params_1200mhz[NUM_SYS_CLKS] = {
+ {50, 0, 1, -1, -1, -1, -1, -1}, /* 12 MHz */
+ {600, 12, 1, -1, -1, -1, -1, -1}, /* 13 MHz */
+ {250, 6, 1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
+ {125, 3, 1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
+ {300, 12, 1, -1, -1, -1, -1, -1}, /* 26 MHz */
+ {200, 8, 1, -1, -1, -1, -1, -1}, /* 27 MHz */
+ {125, 7, 1, -1, -1, -1, -1, -1} /* 38.4 MHz */
+};
+
+static const struct dpll_params core_dpll_params_1600mhz[NUM_SYS_CLKS] = {
+ {200, 2, 1, 5, 8, 4, 6, 5}, /* 12 MHz */
+ {800, 12, 1, 5, 8, 4, 6, 5}, /* 13 MHz */
+ {619, 12, 1, 5, 8, 4, 6, 5}, /* 16.8 MHz */
+ {125, 2, 1, 5, 8, 4, 6, 5}, /* 19.2 MHz */
+ {400, 12, 1, 5, 8, 4, 6, 5}, /* 26 MHz */
+ {800, 26, 1, 5, 8, 4, 6, 5}, /* 27 MHz */
+ {125, 5, 1, 5, 8, 4, 6, 5} /* 38.4 MHz */
+};
+
+static const struct dpll_params core_dpll_params_es1_1524mhz[NUM_SYS_CLKS] = {
+ {127, 1, 1, 5, 8, 4, 6, 5}, /* 12 MHz */
+ {762, 12, 1, 5, 8, 4, 6, 5}, /* 13 MHz */
+ {635, 13, 1, 5, 8, 4, 6, 5}, /* 16.8 MHz */
+ {635, 15, 1, 5, 8, 4, 6, 5}, /* 19.2 MHz */
+ {381, 12, 1, 5, 8, 4, 6, 5}, /* 26 MHz */
+ {254, 8, 1, 5, 8, 4, 6, 5}, /* 27 MHz */
+ {496, 24, 1, 5, 8, 4, 6, 5} /* 38.4 MHz */
+};
+
+static const struct dpll_params
+ core_dpll_params_es2_1600mhz_ddr200mhz[NUM_SYS_CLKS] = {
+ {200, 2, 2, 5, 8, 4, 6, 5}, /* 12 MHz */
+ {800, 12, 2, 5, 8, 4, 6, 5}, /* 13 MHz */
+ {619, 12, 2, 5, 8, 4, 6, 5}, /* 16.8 MHz */
+ {125, 2, 2, 5, 8, 4, 6, 5}, /* 19.2 MHz */
+ {400, 12, 2, 5, 8, 4, 6, 5}, /* 26 MHz */
+ {800, 26, 2, 5, 8, 4, 6, 5}, /* 27 MHz */
+ {125, 5, 2, 5, 8, 4, 6, 5} /* 38.4 MHz */
+};
+
+static const struct dpll_params per_dpll_params_1536mhz[NUM_SYS_CLKS] = {
+ {64, 0, 8, 6, 12, 9, 4, 5}, /* 12 MHz */
+ {768, 12, 8, 6, 12, 9, 4, 5}, /* 13 MHz */
+ {320, 6, 8, 6, 12, 9, 4, 5}, /* 16.8 MHz */
+ {40, 0, 8, 6, 12, 9, 4, 5}, /* 19.2 MHz */
+ {384, 12, 8, 6, 12, 9, 4, 5}, /* 26 MHz */
+ {256, 8, 8, 6, 12, 9, 4, 5}, /* 27 MHz */
+ {20, 0, 8, 6, 12, 9, 4, 5} /* 38.4 MHz */
+};
+
+static const struct dpll_params iva_dpll_params_1862mhz[NUM_SYS_CLKS] = {
+ {931, 11, -1, -1, 4, 7, -1, -1}, /* 12 MHz */
+ {931, 12, -1, -1, 4, 7, -1, -1}, /* 13 MHz */
+ {665, 11, -1, -1, 4, 7, -1, -1}, /* 16.8 MHz */
+ {727, 14, -1, -1, 4, 7, -1, -1}, /* 19.2 MHz */
+ {931, 25, -1, -1, 4, 7, -1, -1}, /* 26 MHz */
+ {931, 26, -1, -1, 4, 7, -1, -1}, /* 27 MHz */
+ {412, 16, -1, -1, 4, 7, -1, -1} /* 38.4 MHz */
+};
+
+/* ABE M & N values with sys_clk as source */
+static const struct dpll_params
+ abe_dpll_params_sysclk_196608khz[NUM_SYS_CLKS] = {
+ {49, 5, 1, 1, -1, -1, -1, -1}, /* 12 MHz */
+ {68, 8, 1, 1, -1, -1, -1, -1}, /* 13 MHz */
+ {35, 5, 1, 1, -1, -1, -1, -1}, /* 16.8 MHz */
+ {46, 8, 1, 1, -1, -1, -1, -1}, /* 19.2 MHz */
+ {34, 8, 1, 1, -1, -1, -1, -1}, /* 26 MHz */
+ {29, 7, 1, 1, -1, -1, -1, -1}, /* 27 MHz */
+ {64, 24, 1, 1, -1, -1, -1, -1} /* 38.4 MHz */
+};
+
+/* ABE M & N values with 32K clock as source */
+static const struct dpll_params abe_dpll_params_32k_196608khz = {
+ 750, 0, 1, 1, -1, -1, -1, -1
+};
+
+
+static const struct dpll_params usb_dpll_params_1920mhz[NUM_SYS_CLKS] = {
+ {80, 0, 2, -1, -1, -1, -1, -1}, /* 12 MHz */
+ {960, 12, 2, -1, -1, -1, -1, -1}, /* 13 MHz */
+ {400, 6, 2, -1, -1, -1, -1, -1}, /* 16.8 MHz */
+ {50, 0, 2, -1, -1, -1, -1, -1}, /* 19.2 MHz */
+ {480, 12, 2, -1, -1, -1, -1, -1}, /* 26 MHz */
+ {320, 8, 2, -1, -1, -1, -1, -1}, /* 27 MHz */
+ {25, 0, 2, -1, -1, -1, -1, -1} /* 38.4 MHz */
+};
+
+static inline u32 __get_sys_clk_index(void)
+{
+ u32 ind;
+ /*
+ * For ES1 the ROM code calibration of sys clock is not reliable
+ * due to hw issue. So, use hard-coded value. If this value is not
+ * correct for any board over-ride this function in board file
+ * From ES2.0 onwards you will get this information from
+ * CM_SYS_CLKSEL
+ */
+ if (omap_revision() == OMAP4430_ES1_0)
+ ind = OMAP_SYS_CLK_IND_38_4_MHZ;
+ else {
+ /* SYS_CLKSEL - 1 to match the dpll param array indices */
+ ind = (readl(&prcm->cm_sys_clksel) &
+ CM_SYS_CLKSEL_SYS_CLKSEL_MASK) - 1;
+ }
+ return ind;
+}
+
+u32 get_sys_clk_index(void)
+ __attribute__ ((weak, alias("__get_sys_clk_index")));
+
+u32 get_sys_clk_freq(void)
+{
+ u8 index = get_sys_clk_index();
+ return sys_clk_array[index];
+}
+
+static inline void do_bypass_dpll(u32 *const base)
+{
+ struct dpll_regs *dpll_regs = (struct dpll_regs *)base;
+
+ clrsetbits_le32(&dpll_regs->cm_clkmode_dpll,
+ CM_CLKMODE_DPLL_DPLL_EN_MASK,
+ DPLL_EN_FAST_RELOCK_BYPASS <<
+ CM_CLKMODE_DPLL_EN_SHIFT);
+}
+
+static inline void wait_for_bypass(u32 *const base)
+{
+ struct dpll_regs *const dpll_regs = (struct dpll_regs *)base;
+
+ if (!wait_on_value(ST_DPLL_CLK_MASK, 0, &dpll_regs->cm_idlest_dpll,
+ LDELAY)) {
+ printf("Bypassing DPLL failed %p\n", base);
+ }
+}
+
+static inline void do_lock_dpll(u32 *const base)
+{
+ struct dpll_regs *const dpll_regs = (struct dpll_regs *)base;
+
+ clrsetbits_le32(&dpll_regs->cm_clkmode_dpll,
+ CM_CLKMODE_DPLL_DPLL_EN_MASK,
+ DPLL_EN_LOCK << CM_CLKMODE_DPLL_EN_SHIFT);
+}
+
+static inline void wait_for_lock(u32 *const base)
+{
+ struct dpll_regs *const dpll_regs = (struct dpll_regs *)base;
+
+ if (!wait_on_value(ST_DPLL_CLK_MASK, ST_DPLL_CLK_MASK,
+ &dpll_regs->cm_idlest_dpll, LDELAY)) {
+ printf("DPLL locking failed for %p\n", base);
+ hang();
+ }
+}
+
+static void do_setup_dpll(u32 *const base, const struct dpll_params *params,
+ u8 lock)
+{
+ u32 temp;
+ struct dpll_regs *const dpll_regs = (struct dpll_regs *)base;
+
+ bypass_dpll(base);
+
+ /* Set M & N */
+ temp = readl(&dpll_regs->cm_clksel_dpll);
+
+ temp &= ~CM_CLKSEL_DPLL_M_MASK;
+ temp |= (params->m << CM_CLKSEL_DPLL_M_SHIFT) & CM_CLKSEL_DPLL_M_MASK;
+
+ temp &= ~CM_CLKSEL_DPLL_N_MASK;
+ temp |= (params->n << CM_CLKSEL_DPLL_N_SHIFT) & CM_CLKSEL_DPLL_N_MASK;
+
+ writel(temp, &dpll_regs->cm_clksel_dpll);
+
+ /* Lock */
+ if (lock)
+ do_lock_dpll(base);
+
+ /* Setup post-dividers */
+ if (params->m2 >= 0)
+ writel(params->m2, &dpll_regs->cm_div_m2_dpll);
+ if (params->m3 >= 0)
+ writel(params->m3, &dpll_regs->cm_div_m3_dpll);
+ if (params->m4 >= 0)
+ writel(params->m4, &dpll_regs->cm_div_m4_dpll);
+ if (params->m5 >= 0)
+ writel(params->m5, &dpll_regs->cm_div_m5_dpll);
+ if (params->m6 >= 0)
+ writel(params->m6, &dpll_regs->cm_div_m6_dpll);
+ if (params->m7 >= 0)
+ writel(params->m7, &dpll_regs->cm_div_m7_dpll);
+
+ /* Wait till the DPLL locks */
+ if (lock)
+ wait_for_lock(base);
+}
+
+const struct dpll_params *get_core_dpll_params(void)
+{
+ u32 sysclk_ind = get_sys_clk_index();
+
+ switch (omap_revision()) {
+ case OMAP4430_ES1_0:
+ return &core_dpll_params_es1_1524mhz[sysclk_ind];
+ case OMAP4430_ES2_0:
+ case OMAP4430_SILICON_ID_INVALID:
+ /* safest */
+ return &core_dpll_params_es2_1600mhz_ddr200mhz[sysclk_ind];
+ default:
+ return &core_dpll_params_1600mhz[sysclk_ind];
+ }
+}
+
+u32 omap4_ddr_clk(void)
+{
+ u32 ddr_clk, sys_clk_khz;
+ const struct dpll_params *core_dpll_params;
+
+ sys_clk_khz = get_sys_clk_freq() / 1000;
+
+ core_dpll_params = get_core_dpll_params();
+
+ debug("sys_clk %d\n ", sys_clk_khz * 1000);
+
+ /* Find Core DPLL locked frequency first */
+ ddr_clk = sys_clk_khz * 2 * core_dpll_params->m /
+ (core_dpll_params->n + 1);
+ /*
+ * DDR frequency is PHY_ROOT_CLK/2
+ * PHY_ROOT_CLK = Fdpll/2/M2
+ */
+ ddr_clk = ddr_clk / 4 / core_dpll_params->m2;
+
+ ddr_clk *= 1000; /* convert to Hz */
+ debug("ddr_clk %d\n ", ddr_clk);
+
+ return ddr_clk;
+}
+
+/*
+ * Lock MPU dpll
+ *
+ * Resulting MPU frequencies:
+ * 4430 ES1.0 : 600 MHz
+ * 4430 ES2.x : 792 MHz (OPP Turbo)
+ * 4460 : 920 MHz (OPP Turbo) - DCC disabled
+ */
+void configure_mpu_dpll(void)
+{
+ const struct dpll_params *params;
+ struct dpll_regs *mpu_dpll_regs;
+ u32 omap4_rev, sysclk_ind;
+
+ omap4_rev = omap_revision();
+ sysclk_ind = get_sys_clk_index();
+
+ if (omap4_rev == OMAP4430_ES1_0)
+ params = &mpu_dpll_params_1200mhz[sysclk_ind];
+ else if (omap4_rev < OMAP4460_ES1_0)
+ params = &mpu_dpll_params_1584mhz[sysclk_ind];
+ else
+ params = &mpu_dpll_params_1840mhz[sysclk_ind];
+
+ /* DCC and clock divider settings for 4460 */
+ if (omap4_rev >= OMAP4460_ES1_0) {
+ mpu_dpll_regs =
+ (struct dpll_regs *)&prcm->cm_clkmode_dpll_mpu;
+ bypass_dpll(&prcm->cm_clkmode_dpll_mpu);
+ clrbits_le32(&prcm->cm_mpu_mpu_clkctrl,
+ MPU_CLKCTRL_CLKSEL_EMIF_DIV_MODE_MASK);
+ setbits_le32(&prcm->cm_mpu_mpu_clkctrl,
+ MPU_CLKCTRL_CLKSEL_ABE_DIV_MODE_MASK);
+ clrbits_le32(&mpu_dpll_regs->cm_clksel_dpll,
+ CM_CLKSEL_DCC_EN_MASK);
+ }
+
+ do_setup_dpll(&prcm->cm_clkmode_dpll_mpu, params, DPLL_LOCK);
+ debug("MPU DPLL locked\n");
+}
+
+static void setup_dplls(void)
+{
+ u32 sysclk_ind, temp;
+ const struct dpll_params *params;
+ debug("setup_dplls\n");
+
+ sysclk_ind = get_sys_clk_index();
+
+ /* CORE dpll */
+ params = get_core_dpll_params(); /* default - safest */
+ /*
+ * Do not lock the core DPLL now. Just set it up.
+ * Core DPLL will be locked after setting up EMIF
+ * using the FREQ_UPDATE method(freq_update_core())
+ */
+ do_setup_dpll(&prcm->cm_clkmode_dpll_core, params, DPLL_NO_LOCK);
+ /* Set the ratios for CORE_CLK, L3_CLK, L4_CLK */
+ temp = (CLKSEL_CORE_X2_DIV_1 << CLKSEL_CORE_SHIFT) |
+ (CLKSEL_L3_CORE_DIV_2 << CLKSEL_L3_SHIFT) |
+ (CLKSEL_L4_L3_DIV_2 << CLKSEL_L4_SHIFT);
+ writel(temp, &prcm->cm_clksel_core);
+ debug("Core DPLL configured\n");
+
+ /* lock PER dpll */
+ do_setup_dpll(&prcm->cm_clkmode_dpll_per,
+ &per_dpll_params_1536mhz[sysclk_ind], DPLL_LOCK);
+ debug("PER DPLL locked\n");
+
+ /* MPU dpll */
+ configure_mpu_dpll();
+}
+
+static void setup_non_essential_dplls(void)
+{
+ u32 sys_clk_khz, abe_ref_clk;
+ u32 sysclk_ind, sd_div, num, den;
+ const struct dpll_params *params;
+
+ sysclk_ind = get_sys_clk_index();
+ sys_clk_khz = get_sys_clk_freq() / 1000;
+
+ /* IVA */
+ clrsetbits_le32(&prcm->cm_bypclk_dpll_iva,
+ CM_BYPCLK_DPLL_IVA_CLKSEL_MASK, DPLL_IVA_CLKSEL_CORE_X2_DIV_2);
+
+ do_setup_dpll(&prcm->cm_clkmode_dpll_iva,
+ &iva_dpll_params_1862mhz[sysclk_ind], DPLL_LOCK);
+
+ /*
+ * USB:
+ * USB dpll is J-type. Need to set DPLL_SD_DIV for jitter correction
+ * DPLL_SD_DIV = CEILING ([DPLL_MULT/(DPLL_DIV+1)]* CLKINP / 250)
+ * - where CLKINP is sys_clk in MHz
+ * Use CLKINP in KHz and adjust the denominator accordingly so
+ * that we have enough accuracy and at the same time no overflow
+ */
+ params = &usb_dpll_params_1920mhz[sysclk_ind];
+ num = params->m * sys_clk_khz;
+ den = (params->n + 1) * 250 * 1000;
+ num += den - 1;
+ sd_div = num / den;
+ clrsetbits_le32(&prcm->cm_clksel_dpll_usb,
+ CM_CLKSEL_DPLL_DPLL_SD_DIV_MASK,
+ sd_div << CM_CLKSEL_DPLL_DPLL_SD_DIV_SHIFT);
+
+ /* Now setup the dpll with the regular function */
+ do_setup_dpll(&prcm->cm_clkmode_dpll_usb, params, DPLL_LOCK);
+
+#ifdef CONFIG_SYS_OMAP4_ABE_SYSCK
+ params = &abe_dpll_params_sysclk_196608khz[sysclk_ind];
+ abe_ref_clk = CM_ABE_PLL_REF_CLKSEL_CLKSEL_SYSCLK;
+#else
+ params = &abe_dpll_params_32k_196608khz;
+ abe_ref_clk = CM_ABE_PLL_REF_CLKSEL_CLKSEL_32KCLK;
+ /*
+ * We need to enable some additional options to achieve
+ * 196.608MHz from 32768 Hz
+ */
+ setbits_le32(&prcm->cm_clkmode_dpll_abe,
+ CM_CLKMODE_DPLL_DRIFTGUARD_EN_MASK|
+ CM_CLKMODE_DPLL_RELOCK_RAMP_EN_MASK|
+ CM_CLKMODE_DPLL_LPMODE_EN_MASK|
+ CM_CLKMODE_DPLL_REGM4XEN_MASK);
+ /* Spend 4 REFCLK cycles at each stage */
+ clrsetbits_le32(&prcm->cm_clkmode_dpll_abe,
+ CM_CLKMODE_DPLL_RAMP_RATE_MASK,
+ 1 << CM_CLKMODE_DPLL_RAMP_RATE_SHIFT);
+#endif
+
+ /* Select the right reference clk */
+ clrsetbits_le32(&prcm->cm_abe_pll_ref_clksel,
+ CM_ABE_PLL_REF_CLKSEL_CLKSEL_MASK,
+ abe_ref_clk << CM_ABE_PLL_REF_CLKSEL_CLKSEL_SHIFT);
+ /* Lock the dpll */
+ do_setup_dpll(&prcm->cm_clkmode_dpll_abe, params, DPLL_LOCK);
+}
+
+static void do_scale_tps62361(u32 reg, u32 volt_mv)
+{
+ u32 temp, step;
+
+ step = volt_mv - TPS62361_BASE_VOLT_MV;
+ step /= 10;
+
+ /*
+ * Select SET1 in TPS62361:
+ * VSEL1 is grounded on board. So the following selects
+ * VSEL1 = 0 and VSEL0 = 1
+ */
+ omap_set_gpio_direction(TPS62361_VSEL0_GPIO, 0);
+ omap_set_gpio_dataout(TPS62361_VSEL0_GPIO, 1);
+
+ temp = TPS62361_I2C_SLAVE_ADDR |
+ (reg << PRM_VC_VAL_BYPASS_REGADDR_SHIFT) |
+ (step << PRM_VC_VAL_BYPASS_DATA_SHIFT) |
+ PRM_VC_VAL_BYPASS_VALID_BIT;
+ debug("do_scale_tps62361: volt - %d step - 0x%x\n", volt_mv, step);
+
+ writel(temp, &prcm->prm_vc_val_bypass);
+ if (!wait_on_value(PRM_VC_VAL_BYPASS_VALID_BIT, 0,
+ &prcm->prm_vc_val_bypass, LDELAY)) {
+ puts("Scaling voltage failed for vdd_mpu from TPS\n");
+ }
+}
+
+static void do_scale_vcore(u32 vcore_reg, u32 volt_mv)
+{
+ u32 temp, offset_code;
+ u32 step = 12660; /* 12.66 mV represented in uV */
+ u32 offset = volt_mv;
+
+ /* convert to uV for better accuracy in the calculations */
+ offset *= 1000;
+
+ if (omap_revision() == OMAP4430_ES1_0)
+ offset -= PHOENIX_SMPS_BASE_VOLT_STD_MODE_UV;
+ else
+ offset -= PHOENIX_SMPS_BASE_VOLT_STD_MODE_WITH_OFFSET_UV;
+
+ offset_code = (offset + step - 1) / step;
+ /* The code starts at 1 not 0 */
+ offset_code++;
+
+ debug("do_scale_vcore: volt - %d offset_code - 0x%x\n", volt_mv,
+ offset_code);
+
+ temp = SMPS_I2C_SLAVE_ADDR |
+ (vcore_reg << PRM_VC_VAL_BYPASS_REGADDR_SHIFT) |
+ (offset_code << PRM_VC_VAL_BYPASS_DATA_SHIFT) |
+ PRM_VC_VAL_BYPASS_VALID_BIT;
+ writel(temp, &prcm->prm_vc_val_bypass);
+ if (!wait_on_value(PRM_VC_VAL_BYPASS_VALID_BIT, 0,
+ &prcm->prm_vc_val_bypass, LDELAY)) {
+ printf("Scaling voltage failed for 0x%x\n", vcore_reg);
+ }
+}
+
+/*
+ * Setup the voltages for vdd_mpu, vdd_core, and vdd_iva
+ * We set the maximum voltages allowed here because Smart-Reflex is not
+ * enabled in bootloader. Voltage initialization in the kernel will set
+ * these to the nominal values after enabling Smart-Reflex
+ */
+static void scale_vcores(void)
+{
+ u32 volt, sys_clk_khz, cycles_hi, cycles_low, temp, omap4_rev;
+
+ sys_clk_khz = get_sys_clk_freq() / 1000;
+
+ /*
+ * Setup the dedicated I2C controller for Voltage Control
+ * I2C clk - high period 40% low period 60%
+ */
+ cycles_hi = sys_clk_khz * 4 / PRM_VC_I2C_CHANNEL_FREQ_KHZ / 10;
+ cycles_low = sys_clk_khz * 6 / PRM_VC_I2C_CHANNEL_FREQ_KHZ / 10;
+ /* values to be set in register - less by 5 & 7 respectively */
+ cycles_hi -= 5;
+ cycles_low -= 7;
+ temp = (cycles_hi << PRM_VC_CFG_I2C_CLK_SCLH_SHIFT) |
+ (cycles_low << PRM_VC_CFG_I2C_CLK_SCLL_SHIFT);
+ writel(temp, &prcm->prm_vc_cfg_i2c_clk);
+
+ /* Disable high speed mode and all advanced features */
+ writel(0x0, &prcm->prm_vc_cfg_i2c_mode);
+
+ omap4_rev = omap_revision();
+ /* TPS - supplies vdd_mpu on 4460 */
+ if (omap4_rev >= OMAP4460_ES1_0) {
+ volt = 1430;
+ do_scale_tps62361(TPS62361_REG_ADDR_SET1, volt);
+ }
+
+ /*
+ * VCORE 1
+ *
+ * 4430 : supplies vdd_mpu
+ * Setting a high voltage for Nitro mode as smart reflex is not enabled.
+ * We use the maximum possible value in the AVS range because the next
+ * higher voltage in the discrete range (code >= 0b111010) is way too
+ * high
+ *
+ * 4460 : supplies vdd_core
+ */
+ if (omap4_rev < OMAP4460_ES1_0) {
+ volt = 1417;
+ do_scale_vcore(SMPS_REG_ADDR_VCORE1, volt);
+ } else {
+ volt = 1200;
+ do_scale_vcore(SMPS_REG_ADDR_VCORE1, volt);
+ }
+
+ /* VCORE 2 - supplies vdd_iva */
+ volt = 1200;
+ do_scale_vcore(SMPS_REG_ADDR_VCORE2, volt);
+
+ /*
+ * VCORE 3
+ * 4430 : supplies vdd_core
+ * 4460 : not connected
+ */
+ if (omap4_rev < OMAP4460_ES1_0) {
+ volt = 1200;
+ do_scale_vcore(SMPS_REG_ADDR_VCORE3, volt);
+ }
+}
+
+static inline void enable_clock_domain(u32 *const clkctrl_reg, u32 enable_mode)
+{
+ clrsetbits_le32(clkctrl_reg, CD_CLKCTRL_CLKTRCTRL_MASK,
+ enable_mode << CD_CLKCTRL_CLKTRCTRL_SHIFT);
+ debug("Enable clock domain - 0x%08x\n", clkctrl_reg);
+}
+
+static inline void wait_for_clk_enable(u32 *clkctrl_addr)
+{
+ u32 clkctrl, idlest = MODULE_CLKCTRL_IDLEST_DISABLED;
+ u32 bound = LDELAY;
+
+ while ((idlest == MODULE_CLKCTRL_IDLEST_DISABLED) ||
+ (idlest == MODULE_CLKCTRL_IDLEST_TRANSITIONING)) {
+
+ clkctrl = readl(clkctrl_addr);
+ idlest = (clkctrl & MODULE_CLKCTRL_IDLEST_MASK) >>
+ MODULE_CLKCTRL_IDLEST_SHIFT;
+ if (--bound == 0) {
+ printf("Clock enable failed for 0x%p idlest 0x%x\n",
+ clkctrl_addr, clkctrl);
+ return;
+ }
+ }
+}
+
+static inline void enable_clock_module(u32 *const clkctrl_addr, u32 enable_mode,
+ u32 wait_for_enable)
+{
+ clrsetbits_le32(clkctrl_addr, MODULE_CLKCTRL_MODULEMODE_MASK,
+ enable_mode << MODULE_CLKCTRL_MODULEMODE_SHIFT);
+ debug("Enable clock module - 0x%08x\n", clkctrl_addr);
+ if (wait_for_enable)
+ wait_for_clk_enable(clkctrl_addr);
+}
+
+/*
+ * Enable essential clock domains, modules and
+ * do some additional special settings needed
+ */
+static void enable_basic_clocks(void)
+{
+ u32 i, max = 100, wait_for_enable = 1;
+ u32 *const clk_domains_essential[] = {
+ &prcm->cm_l4per_clkstctrl,
+ &prcm->cm_l3init_clkstctrl,
+ &prcm->cm_memif_clkstctrl,
+ &prcm->cm_l4cfg_clkstctrl,
+ 0
+ };
+
+ u32 *const clk_modules_hw_auto_essential[] = {
+ &prcm->cm_wkup_gpio1_clkctrl,
+ &prcm->cm_l4per_gpio2_clkctrl,
+ &prcm->cm_l4per_gpio3_clkctrl,
+ &prcm->cm_l4per_gpio4_clkctrl,
+ &prcm->cm_l4per_gpio5_clkctrl,
+ &prcm->cm_l4per_gpio6_clkctrl,
+ &prcm->cm_memif_emif_1_clkctrl,
+ &prcm->cm_memif_emif_2_clkctrl,
+ &prcm->cm_l3init_hsusbotg_clkctrl,
+ &prcm->cm_l3init_usbphy_clkctrl,
+ &prcm->cm_l4cfg_l4_cfg_clkctrl,
+ 0
+ };
+
+ u32 *const clk_modules_explicit_en_essential[] = {
+ &prcm->cm_l4per_gptimer2_clkctrl,
+ &prcm->cm_l3init_hsmmc1_clkctrl,
+ &prcm->cm_l3init_hsmmc2_clkctrl,
+ &prcm->cm_l4per_mcspi1_clkctrl,
+ &prcm->cm_wkup_gptimer1_clkctrl,
+ &prcm->cm_l4per_i2c1_clkctrl,
+ &prcm->cm_l4per_i2c2_clkctrl,
+ &prcm->cm_l4per_i2c3_clkctrl,
+ &prcm->cm_l4per_i2c4_clkctrl,
+ &prcm->cm_wkup_wdtimer2_clkctrl,
+ &prcm->cm_l4per_uart3_clkctrl,
+ 0
+ };
+
+ /* Enable optional additional functional clock for GPIO4 */
+ setbits_le32(&prcm->cm_l4per_gpio4_clkctrl,
+ GPIO4_CLKCTRL_OPTFCLKEN_MASK);
+
+ /* Enable 96 MHz clock for MMC1 & MMC2 */
+ setbits_le32(&prcm->cm_l3init_hsmmc1_clkctrl,
+ HSMMC_CLKCTRL_CLKSEL_MASK);
+ setbits_le32(&prcm->cm_l3init_hsmmc2_clkctrl,
+ HSMMC_CLKCTRL_CLKSEL_MASK);
+
+ /* Select 32KHz clock as the source of GPTIMER1 */
+ setbits_le32(&prcm->cm_wkup_gptimer1_clkctrl,
+ GPTIMER1_CLKCTRL_CLKSEL_MASK);
+
+ /* Enable optional 48M functional clock for USB PHY */
+ setbits_le32(&prcm->cm_l3init_usbphy_clkctrl,
+ USBPHY_CLKCTRL_OPTFCLKEN_PHY_48M_MASK);
+
+ /* Put the clock domains in SW_WKUP mode */
+ for (i = 0; (i < max) && clk_domains_essential[i]; i++) {
+ enable_clock_domain(clk_domains_essential[i],
+ CD_CLKCTRL_CLKTRCTRL_SW_WKUP);
+ }
+
+ /* Clock modules that need to be put in HW_AUTO */
+ for (i = 0; (i < max) && clk_modules_hw_auto_essential[i]; i++) {
+ enable_clock_module(clk_modules_hw_auto_essential[i],
+ MODULE_CLKCTRL_MODULEMODE_HW_AUTO,
+ wait_for_enable);
+ };
+
+ /* Clock modules that need to be put in SW_EXPLICIT_EN mode */
+ for (i = 0; (i < max) && clk_modules_explicit_en_essential[i]; i++) {
+ enable_clock_module(clk_modules_explicit_en_essential[i],
+ MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN,
+ wait_for_enable);
+ };
+
+ /* Put the clock domains in HW_AUTO mode now */
+ for (i = 0; (i < max) && clk_domains_essential[i]; i++) {
+ enable_clock_domain(clk_domains_essential[i],
+ CD_CLKCTRL_CLKTRCTRL_HW_AUTO);
+ }
+}
+
+/*
+ * Enable non-essential clock domains, modules and
+ * do some additional special settings needed
+ */
+static void enable_non_essential_clocks(void)
+{
+ u32 i, max = 100, wait_for_enable = 0;
+ u32 *const clk_domains_non_essential[] = {
+ &prcm->cm_mpu_m3_clkstctrl,
+ &prcm->cm_ivahd_clkstctrl,
+ &prcm->cm_dsp_clkstctrl,
+ &prcm->cm_dss_clkstctrl,
+ &prcm->cm_sgx_clkstctrl,
+ &prcm->cm1_abe_clkstctrl,
+ &prcm->cm_c2c_clkstctrl,
+ &prcm->cm_cam_clkstctrl,
+ &prcm->cm_dss_clkstctrl,
+ &prcm->cm_sdma_clkstctrl,
+ 0
+ };
+
+ u32 *const clk_modules_hw_auto_non_essential[] = {
+ &prcm->cm_mpu_m3_mpu_m3_clkctrl,
+ &prcm->cm_ivahd_ivahd_clkctrl,
+ &prcm->cm_ivahd_sl2_clkctrl,
+ &prcm->cm_dsp_dsp_clkctrl,
+ &prcm->cm_l3_2_gpmc_clkctrl,
+ &prcm->cm_l3instr_l3_3_clkctrl,
+ &prcm->cm_l3instr_l3_instr_clkctrl,
+ &prcm->cm_l3instr_intrconn_wp1_clkctrl,
+ &prcm->cm_l3init_hsi_clkctrl,
+ &prcm->cm_l3init_hsusbtll_clkctrl,
+ 0
+ };
+
+ u32 *const clk_modules_explicit_en_non_essential[] = {
+ &prcm->cm1_abe_aess_clkctrl,
+ &prcm->cm1_abe_pdm_clkctrl,
+ &prcm->cm1_abe_dmic_clkctrl,
+ &prcm->cm1_abe_mcasp_clkctrl,
+ &prcm->cm1_abe_mcbsp1_clkctrl,
+ &prcm->cm1_abe_mcbsp2_clkctrl,
+ &prcm->cm1_abe_mcbsp3_clkctrl,
+ &prcm->cm1_abe_slimbus_clkctrl,
+ &prcm->cm1_abe_timer5_clkctrl,
+ &prcm->cm1_abe_timer6_clkctrl,
+ &prcm->cm1_abe_timer7_clkctrl,
+ &prcm->cm1_abe_timer8_clkctrl,
+ &prcm->cm1_abe_wdt3_clkctrl,
+ &prcm->cm_l4per_gptimer9_clkctrl,
+ &prcm->cm_l4per_gptimer10_clkctrl,
+ &prcm->cm_l4per_gptimer11_clkctrl,
+ &prcm->cm_l4per_gptimer3_clkctrl,
+ &prcm->cm_l4per_gptimer4_clkctrl,
+ &prcm->cm_l4per_hdq1w_clkctrl,
+ &prcm->cm_l4per_mcbsp4_clkctrl,
+ &prcm->cm_l4per_mcspi2_clkctrl,
+ &prcm->cm_l4per_mcspi3_clkctrl,
+ &prcm->cm_l4per_mcspi4_clkctrl,
+ &prcm->cm_l4per_mmcsd3_clkctrl,
+ &prcm->cm_l4per_mmcsd4_clkctrl,
+ &prcm->cm_l4per_mmcsd5_clkctrl,
+ &prcm->cm_l4per_uart1_clkctrl,
+ &prcm->cm_l4per_uart2_clkctrl,
+ &prcm->cm_l4per_uart4_clkctrl,
+ &prcm->cm_wkup_keyboard_clkctrl,
+ &prcm->cm_wkup_wdtimer2_clkctrl,
+ &prcm->cm_cam_iss_clkctrl,
+ &prcm->cm_cam_fdif_clkctrl,
+ &prcm->cm_dss_dss_clkctrl,
+ &prcm->cm_sgx_sgx_clkctrl,
+ &prcm->cm_l3init_hsusbhost_clkctrl,
+ &prcm->cm_l3init_fsusb_clkctrl,
+ 0
+ };
+
+ /* Enable optional functional clock for ISS */
+ setbits_le32(&prcm->cm_cam_iss_clkctrl, ISS_CLKCTRL_OPTFCLKEN_MASK);
+
+ /* Enable all optional functional clocks of DSS */
+ setbits_le32(&prcm->cm_dss_dss_clkctrl, DSS_CLKCTRL_OPTFCLKEN_MASK);
+
+
+ /* Put the clock domains in SW_WKUP mode */
+ for (i = 0; (i < max) && clk_domains_non_essential[i]; i++) {
+ enable_clock_domain(clk_domains_non_essential[i],
+ CD_CLKCTRL_CLKTRCTRL_SW_WKUP);
+ }
+
+ /* Clock modules that need to be put in HW_AUTO */
+ for (i = 0; (i < max) && clk_modules_hw_auto_non_essential[i]; i++) {
+ enable_clock_module(clk_modules_hw_auto_non_essential[i],
+ MODULE_CLKCTRL_MODULEMODE_HW_AUTO,
+ wait_for_enable);
+ };
+
+ /* Clock modules that need to be put in SW_EXPLICIT_EN mode */
+ for (i = 0; (i < max) && clk_modules_explicit_en_non_essential[i];
+ i++) {
+ enable_clock_module(clk_modules_explicit_en_non_essential[i],
+ MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN,
+ wait_for_enable);
+ };
+
+ /* Put the clock domains in HW_AUTO mode now */
+ for (i = 0; (i < max) && clk_domains_non_essential[i]; i++) {
+ enable_clock_domain(clk_domains_non_essential[i],
+ CD_CLKCTRL_CLKTRCTRL_HW_AUTO);
+ }
+
+ /* Put camera module in no sleep mode */
+ clrsetbits_le32(&prcm->cm_cam_clkstctrl, MODULE_CLKCTRL_MODULEMODE_MASK,
+ CD_CLKCTRL_CLKTRCTRL_NO_SLEEP <<
+ MODULE_CLKCTRL_MODULEMODE_SHIFT);
+}
+
+
+void freq_update_core(void)
+{
+ u32 freq_config1 = 0;
+ const struct dpll_params *core_dpll_params;
+
+ core_dpll_params = get_core_dpll_params();
+ /* Put EMIF clock domain in sw wakeup mode */
+ enable_clock_domain(&prcm->cm_memif_clkstctrl,
+ CD_CLKCTRL_CLKTRCTRL_SW_WKUP);
+ wait_for_clk_enable(&prcm->cm_memif_emif_1_clkctrl);
+ wait_for_clk_enable(&prcm->cm_memif_emif_2_clkctrl);
+
+ freq_config1 = SHADOW_FREQ_CONFIG1_FREQ_UPDATE_MASK |
+ SHADOW_FREQ_CONFIG1_DLL_RESET_MASK;
+
+ freq_config1 |= (DPLL_EN_LOCK << SHADOW_FREQ_CONFIG1_DPLL_EN_SHIFT) &
+ SHADOW_FREQ_CONFIG1_DPLL_EN_MASK;
+
+ freq_config1 |= (core_dpll_params->m2 <<
+ SHADOW_FREQ_CONFIG1_M2_DIV_SHIFT) &
+ SHADOW_FREQ_CONFIG1_M2_DIV_MASK;
+
+ writel(freq_config1, &prcm->cm_shadow_freq_config1);
+ if (!wait_on_value(SHADOW_FREQ_CONFIG1_FREQ_UPDATE_MASK, 0,
+ &prcm->cm_shadow_freq_config1, LDELAY)) {
+ puts("FREQ UPDATE procedure failed!!");
+ hang();
+ }
+
+ /* Put EMIF clock domain back in hw auto mode */
+ enable_clock_domain(&prcm->cm_memif_clkstctrl,
+ CD_CLKCTRL_CLKTRCTRL_HW_AUTO);
+ wait_for_clk_enable(&prcm->cm_memif_emif_1_clkctrl);
+ wait_for_clk_enable(&prcm->cm_memif_emif_2_clkctrl);
+}
+
+void bypass_dpll(u32 *const base)
+{
+ do_bypass_dpll(base);
+ wait_for_bypass(base);
+}
+
+void lock_dpll(u32 *const base)
+{
+ do_lock_dpll(base);
+ wait_for_lock(base);
+}
+
+void setup_clocks_for_console(void)
+{
+ /* Do not add any spl_debug prints in this function */
+ clrsetbits_le32(&prcm->cm_l4per_clkstctrl, CD_CLKCTRL_CLKTRCTRL_MASK,
+ CD_CLKCTRL_CLKTRCTRL_SW_WKUP <<
+ CD_CLKCTRL_CLKTRCTRL_SHIFT);
+
+ /* Enable all UARTs - console will be on one of them */
+ clrsetbits_le32(&prcm->cm_l4per_uart1_clkctrl,
+ MODULE_CLKCTRL_MODULEMODE_MASK,
+ MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN <<
+ MODULE_CLKCTRL_MODULEMODE_SHIFT);
+
+ clrsetbits_le32(&prcm->cm_l4per_uart2_clkctrl,
+ MODULE_CLKCTRL_MODULEMODE_MASK,
+ MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN <<
+ MODULE_CLKCTRL_MODULEMODE_SHIFT);
+
+ clrsetbits_le32(&prcm->cm_l4per_uart3_clkctrl,
+ MODULE_CLKCTRL_MODULEMODE_MASK,
+ MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN <<
+ MODULE_CLKCTRL_MODULEMODE_SHIFT);
+
+ clrsetbits_le32(&prcm->cm_l4per_uart3_clkctrl,
+ MODULE_CLKCTRL_MODULEMODE_MASK,
+ MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN <<
+ MODULE_CLKCTRL_MODULEMODE_SHIFT);
+
+ clrsetbits_le32(&prcm->cm_l4per_clkstctrl, CD_CLKCTRL_CLKTRCTRL_MASK,
+ CD_CLKCTRL_CLKTRCTRL_HW_AUTO <<
+ CD_CLKCTRL_CLKTRCTRL_SHIFT);
+}
+
+void prcm_init(void)
+{
+ switch (omap4_hw_init_context()) {
+ case OMAP_INIT_CONTEXT_SPL:
+ case OMAP_INIT_CONTEXT_UBOOT_FROM_NOR:
+ case OMAP_INIT_CONTEXT_UBOOT_AFTER_CH:
+ enable_basic_clocks();
+ scale_vcores();
+ setup_dplls();
+ setup_non_essential_dplls();
+ enable_non_essential_clocks();
+ break;
+ default:
+ break;
+ }
+}
diff --git a/board/ti/panda/config.mk b/arch/arm/cpu/armv7/omap4/config.mk
similarity index 64%
rename from board/ti/panda/config.mk
rename to arch/arm/cpu/armv7/omap4/config.mk
index 33901a7..b34fa64 100644
--- a/board/ti/panda/config.mk
+++ b/arch/arm/cpu/armv7/omap4/config.mk
@@ -1,13 +1,13 @@
#
-# (C) Copyright 2006-2009
-# Texas Instruments Incorporated, <www.ti.com>
-#
-# OMAP 4430 SDP
-# see http://www.ti.com/ for more information on Texas Instruments
-#
+# Copyright 2011 Linaro Limited
# See file CREDITS for list of people who contributed to this
# project.
#
+# (C) Copyright 2010
+# Texas Instruments, <www.ti.com>
+#
+# Aneesh V <aneesh@ti.com>
+#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundation; either version 2 of
@@ -15,7 +15,7 @@
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
@@ -23,9 +23,8 @@
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
#
-# SDRAM Address Space:
-# 8000'0000 - 9fff'ffff (512 MB)
-# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
-# (mem base + reserved)
-
-CONFIG_SYS_TEXT_BASE = 0x80e80000
+ifdef CONFIG_SPL_BUILD
+ALL-y += $(OBJTREE)/MLO
+else
+ALL-y += $(obj)u-boot.img
+endif
diff --git a/arch/arm/cpu/armv7/omap4/emif.c b/arch/arm/cpu/armv7/omap4/emif.c
new file mode 100644
index 0000000..487ec42
--- /dev/null
+++ b/arch/arm/cpu/armv7/omap4/emif.c
@@ -0,0 +1,1310 @@
+/*
+ * EMIF programming
+ *
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ *
+ * Aneesh V <aneesh@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/emif.h>
+#include <asm/arch/clocks.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/omap_common.h>
+#include <asm/utils.h>
+
+static inline u32 emif_num(u32 base)
+{
+ if (base == OMAP44XX_EMIF1)
+ return 1;
+ else if (base == OMAP44XX_EMIF2)
+ return 2;
+ else
+ return 0;
+}
+
+static inline u32 get_mr(u32 base, u32 cs, u32 mr_addr)
+{
+ u32 mr;
+ struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
+
+ mr_addr |= cs << OMAP44XX_REG_CS_SHIFT;
+ writel(mr_addr, &emif->emif_lpddr2_mode_reg_cfg);
+ if (omap_revision() == OMAP4430_ES2_0)
+ mr = readl(&emif->emif_lpddr2_mode_reg_data_es2);
+ else
+ mr = readl(&emif->emif_lpddr2_mode_reg_data);
+ debug("get_mr: EMIF%d cs %d mr %08x val 0x%x\n", emif_num(base),
+ cs, mr_addr, mr);
+ return mr;
+}
+
+static inline void set_mr(u32 base, u32 cs, u32 mr_addr, u32 mr_val)
+{
+ struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
+
+ mr_addr |= cs << OMAP44XX_REG_CS_SHIFT;
+ writel(mr_addr, &emif->emif_lpddr2_mode_reg_cfg);
+ writel(mr_val, &emif->emif_lpddr2_mode_reg_data);
+}
+
+void emif_reset_phy(u32 base)
+{
+ struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
+ u32 iodft;
+
+ iodft = readl(&emif->emif_iodft_tlgc);
+ iodft |= OMAP44XX_REG_RESET_PHY_MASK;
+ writel(iodft, &emif->emif_iodft_tlgc);
+}
+
+static void do_lpddr2_init(u32 base, u32 cs)
+{
+ u32 mr_addr;
+
+ /* Wait till device auto initialization is complete */
+ while (get_mr(base, cs, LPDDR2_MR0) & LPDDR2_MR0_DAI_MASK)
+ ;
+ set_mr(base, cs, LPDDR2_MR10, MR10_ZQ_ZQINIT);
+ /*
+ * tZQINIT = 1 us
+ * Enough loops assuming a maximum of 2GHz
+ */
+ sdelay(2000);
+ set_mr(base, cs, LPDDR2_MR1, MR1_BL_8_BT_SEQ_WRAP_EN_NWR_3);
+ set_mr(base, cs, LPDDR2_MR16, MR16_REF_FULL_ARRAY);
+ /*
+ * Enable refresh along with writing MR2
+ * Encoding of RL in MR2 is (RL - 2)
+ */
+ mr_addr = LPDDR2_MR2 | OMAP44XX_REG_REFRESH_EN_MASK;
+ set_mr(base, cs, mr_addr, RL_FINAL - 2);
+}
+
+static void lpddr2_init(u32 base, const struct emif_regs *regs)
+{
+ struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
+
+ /* Not NVM */
+ clrbits_le32(&emif->emif_lpddr2_nvm_config, OMAP44XX_REG_CS1NVMEN_MASK);
+
+ /*
+ * Keep REG_INITREF_DIS = 1 to prevent re-initialization of SDRAM
+ * when EMIF_SDRAM_CONFIG register is written
+ */
+ setbits_le32(&emif->emif_sdram_ref_ctrl, OMAP44XX_REG_INITREF_DIS_MASK);
+
+ /*
+ * Set the SDRAM_CONFIG and PHY_CTRL for the
+ * un-locked frequency & default RL
+ */
+ writel(regs->sdram_config_init, &emif->emif_sdram_config);
+ writel(regs->emif_ddr_phy_ctlr_1_init, &emif->emif_ddr_phy_ctrl_1);
+
+ do_lpddr2_init(base, CS0);
+ if (regs->sdram_config & OMAP44XX_REG_EBANK_MASK)
+ do_lpddr2_init(base, CS1);
+
+ writel(regs->sdram_config, &emif->emif_sdram_config);
+ writel(regs->emif_ddr_phy_ctlr_1, &emif->emif_ddr_phy_ctrl_1);
+
+ /* Enable refresh now */
+ clrbits_le32(&emif->emif_sdram_ref_ctrl, OMAP44XX_REG_INITREF_DIS_MASK);
+
+}
+
+static void emif_update_timings(u32 base, const struct emif_regs *regs)
+{
+ struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
+
+ writel(regs->ref_ctrl, &emif->emif_sdram_ref_ctrl_shdw);
+ writel(regs->sdram_tim1, &emif->emif_sdram_tim_1_shdw);
+ writel(regs->sdram_tim2, &emif->emif_sdram_tim_2_shdw);
+ writel(regs->sdram_tim3, &emif->emif_sdram_tim_3_shdw);
+ if (omap_revision() == OMAP4430_ES1_0) {
+ /* ES1 bug EMIF should be in force idle during freq_update */
+ writel(0, &emif->emif_pwr_mgmt_ctrl);
+ } else {
+ writel(EMIF_PWR_MGMT_CTRL, &emif->emif_pwr_mgmt_ctrl);
+ writel(EMIF_PWR_MGMT_CTRL_SHDW, &emif->emif_pwr_mgmt_ctrl_shdw);
+ }
+ writel(regs->read_idle_ctrl, &emif->emif_read_idlectrl_shdw);
+ writel(regs->zq_config, &emif->emif_zq_config);
+ writel(regs->temp_alert_config, &emif->emif_temp_alert_config);
+ writel(regs->emif_ddr_phy_ctlr_1, &emif->emif_ddr_phy_ctrl_1_shdw);
+
+ if (omap_revision() >= OMAP4460_ES1_0) {
+ writel(EMIF_L3_CONFIG_VAL_SYS_10_MPU_3_LL_0,
+ &emif->emif_l3_config);
+ } else {
+ writel(EMIF_L3_CONFIG_VAL_SYS_10_LL_0,
+ &emif->emif_l3_config);
+ }
+}
+
+#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
+#define print_timing_reg(reg) debug(#reg" - 0x%08x\n", (reg))
+
+static u32 *const T_num = (u32 *)OMAP4_SRAM_SCRATCH_EMIF_T_NUM;
+static u32 *const T_den = (u32 *)OMAP4_SRAM_SCRATCH_EMIF_T_DEN;
+static u32 *const emif_sizes = (u32 *)OMAP4_SRAM_SCRATCH_EMIF_SIZE;
+
+/*
+ * Organization and refresh requirements for LPDDR2 devices of different
+ * types and densities. Derived from JESD209-2 section 2.4
+ */
+const struct lpddr2_addressing addressing_table[] = {
+ /* Banks tREFIx10 rowx32,rowx16 colx32,colx16 density */
+ {BANKS4, T_REFI_15_6, {ROW_12, ROW_12}, {COL_7, COL_8} },/*64M */
+ {BANKS4, T_REFI_15_6, {ROW_12, ROW_12}, {COL_8, COL_9} },/*128M */
+ {BANKS4, T_REFI_7_8, {ROW_13, ROW_13}, {COL_8, COL_9} },/*256M */
+ {BANKS4, T_REFI_7_8, {ROW_13, ROW_13}, {COL_9, COL_10} },/*512M */
+ {BANKS8, T_REFI_7_8, {ROW_13, ROW_13}, {COL_9, COL_10} },/*1GS4 */
+ {BANKS8, T_REFI_3_9, {ROW_14, ROW_14}, {COL_9, COL_10} },/*2GS4 */
+ {BANKS8, T_REFI_3_9, {ROW_14, ROW_14}, {COL_10, COL_11} },/*4G */
+ {BANKS8, T_REFI_3_9, {ROW_15, ROW_15}, {COL_10, COL_11} },/*8G */
+ {BANKS4, T_REFI_7_8, {ROW_14, ROW_14}, {COL_9, COL_10} },/*1GS2 */
+ {BANKS4, T_REFI_3_9, {ROW_15, ROW_15}, {COL_9, COL_10} },/*2GS2 */
+};
+
+static const u32 lpddr2_density_2_size_in_mbytes[] = {
+ 8, /* 64Mb */
+ 16, /* 128Mb */
+ 32, /* 256Mb */
+ 64, /* 512Mb */
+ 128, /* 1Gb */
+ 256, /* 2Gb */
+ 512, /* 4Gb */
+ 1024, /* 8Gb */
+ 2048, /* 16Gb */
+ 4096 /* 32Gb */
+};
+
+/*
+ * Calculate the period of DDR clock from frequency value and set the
+ * denominator and numerator in global variables for easy access later
+ */
+static void set_ddr_clk_period(u32 freq)
+{
+ /*
+ * period = 1/freq
+ * period_in_ns = 10^9/freq
+ */
+ *T_num = 1000000000;
+ *T_den = freq;
+ cancel_out(T_num, T_den, 200);
+
+}
+
+/*
+ * Convert time in nano seconds to number of cycles of DDR clock
+ */
+static inline u32 ns_2_cycles(u32 ns)
+{
+ return ((ns * (*T_den)) + (*T_num) - 1) / (*T_num);
+}
+
+/*
+ * ns_2_cycles with the difference that the time passed is 2 times the actual
+ * value(to avoid fractions). The cycles returned is for the original value of
+ * the timing parameter
+ */
+static inline u32 ns_x2_2_cycles(u32 ns)
+{
+ return ((ns * (*T_den)) + (*T_num) * 2 - 1) / ((*T_num) * 2);
+}
+
+/*
+ * Find addressing table index based on the device's type(S2 or S4) and
+ * density
+ */
+s8 addressing_table_index(u8 type, u8 density, u8 width)
+{
+ u8 index;
+ if ((density > LPDDR2_DENSITY_8Gb) || (width == LPDDR2_IO_WIDTH_8))
+ return -1;
+
+ /*
+ * Look at the way ADDR_TABLE_INDEX* values have been defined
+ * in emif.h compared to LPDDR2_DENSITY_* values
+ * The table is layed out in the increasing order of density
+ * (ignoring type). The exceptions 1GS2 and 2GS2 have been placed
+ * at the end
+ */
+ if ((type == LPDDR2_TYPE_S2) && (density == LPDDR2_DENSITY_1Gb))
+ index = ADDR_TABLE_INDEX1GS2;
+ else if ((type == LPDDR2_TYPE_S2) && (density == LPDDR2_DENSITY_2Gb))
+ index = ADDR_TABLE_INDEX2GS2;
+ else
+ index = density;
+
+ debug("emif: addressing table index %d\n", index);
+
+ return index;
+}
+
+/*
+ * Find the the right timing table from the array of timing
+ * tables of the device using DDR clock frequency
+ */
+static const struct lpddr2_ac_timings *get_timings_table(const struct
+ lpddr2_ac_timings const *const *device_timings,
+ u32 freq)
+{
+ u32 i, temp, freq_nearest;
+ const struct lpddr2_ac_timings *timings = 0;
+
+ emif_assert(freq <= MAX_LPDDR2_FREQ);
+ emif_assert(device_timings);
+
+ /*
+ * Start with the maximum allowed frequency - that is always safe
+ */
+ freq_nearest = MAX_LPDDR2_FREQ;
+ /*
+ * Find the timings table that has the max frequency value:
+ * i. Above or equal to the DDR frequency - safe
+ * ii. The lowest that satisfies condition (i) - optimal
+ */
+ for (i = 0; (i < MAX_NUM_SPEEDBINS) && device_timings[i]; i++) {
+ temp = device_timings[i]->max_freq;
+ if ((temp >= freq) && (temp <= freq_nearest)) {
+ freq_nearest = temp;
+ timings = device_timings[i];
+ }
+ }
+ debug("emif: timings table: %d\n", freq_nearest);
+ return timings;
+}
+
+/*
+ * Finds the value of emif_sdram_config_reg
+ * All parameters are programmed based on the device on CS0.
+ * If there is a device on CS1, it will be same as that on CS0 or
+ * it will be NVM. We don't support NVM yet.
+ * If cs1_device pointer is NULL it is assumed that there is no device
+ * on CS1
+ */
+static u32 get_sdram_config_reg(const struct lpddr2_device_details *cs0_device,
+ const struct lpddr2_device_details *cs1_device,
+ const struct lpddr2_addressing *addressing,
+ u8 RL)
+{
+ u32 config_reg = 0;
+
+ config_reg |= (cs0_device->type + 4) << OMAP44XX_REG_SDRAM_TYPE_SHIFT;
+ config_reg |= EMIF_INTERLEAVING_POLICY_MAX_INTERLEAVING <<
+ OMAP44XX_REG_IBANK_POS_SHIFT;
+
+ config_reg |= cs0_device->io_width << OMAP44XX_REG_NARROW_MODE_SHIFT;
+
+ config_reg |= RL << OMAP44XX_REG_CL_SHIFT;
+
+ config_reg |= addressing->row_sz[cs0_device->io_width] <<
+ OMAP44XX_REG_ROWSIZE_SHIFT;
+
+ config_reg |= addressing->num_banks << OMAP44XX_REG_IBANK_SHIFT;
+
+ config_reg |= (cs1_device ? EBANK_CS1_EN : EBANK_CS1_DIS) <<
+ OMAP44XX_REG_EBANK_SHIFT;
+
+ config_reg |= addressing->col_sz[cs0_device->io_width] <<
+ OMAP44XX_REG_PAGESIZE_SHIFT;
+
+ return config_reg;
+}
+
+static u32 get_sdram_ref_ctrl(u32 freq,
+ const struct lpddr2_addressing *addressing)
+{
+ u32 ref_ctrl = 0, val = 0, freq_khz;
+ freq_khz = freq / 1000;
+ /*
+ * refresh rate to be set is 'tREFI * freq in MHz
+ * division by 10000 to account for khz and x10 in t_REFI_us_x10
+ */
+ val = addressing->t_REFI_us_x10 * freq_khz / 10000;
+ ref_ctrl |= val << OMAP44XX_REG_REFRESH_RATE_SHIFT;
+
+ return ref_ctrl;
+}
+
+static u32 get_sdram_tim_1_reg(const struct lpddr2_ac_timings *timings,
+ const struct lpddr2_min_tck *min_tck,
+ const struct lpddr2_addressing *addressing)
+{
+ u32 tim1 = 0, val = 0;
+ val = max(min_tck->tWTR, ns_x2_2_cycles(timings->tWTRx2)) - 1;
+ tim1 |= val << OMAP44XX_REG_T_WTR_SHIFT;
+
+ if (addressing->num_banks == BANKS8)
+ val = (timings->tFAW * (*T_den) + 4 * (*T_num) - 1) /
+ (4 * (*T_num)) - 1;
+ else
+ val = max(min_tck->tRRD, ns_2_cycles(timings->tRRD)) - 1;
+
+ tim1 |= val << OMAP44XX_REG_T_RRD_SHIFT;
+
+ val = ns_2_cycles(timings->tRASmin + timings->tRPab) - 1;
+ tim1 |= val << OMAP44XX_REG_T_RC_SHIFT;
+
+ val = max(min_tck->tRAS_MIN, ns_2_cycles(timings->tRASmin)) - 1;
+ tim1 |= val << OMAP44XX_REG_T_RAS_SHIFT;
+
+ val = max(min_tck->tWR, ns_2_cycles(timings->tWR)) - 1;
+ tim1 |= val << OMAP44XX_REG_T_WR_SHIFT;
+
+ val = max(min_tck->tRCD, ns_2_cycles(timings->tRCD)) - 1;
+ tim1 |= val << OMAP44XX_REG_T_RCD_SHIFT;
+
+ val = max(min_tck->tRP_AB, ns_2_cycles(timings->tRPab)) - 1;
+ tim1 |= val << OMAP44XX_REG_T_RP_SHIFT;
+
+ return tim1;
+}
+
+static u32 get_sdram_tim_2_reg(const struct lpddr2_ac_timings *timings,
+ const struct lpddr2_min_tck *min_tck)
+{
+ u32 tim2 = 0, val = 0;
+ val = max(min_tck->tCKE, timings->tCKE) - 1;
+ tim2 |= val << OMAP44XX_REG_T_CKE_SHIFT;
+
+ val = max(min_tck->tRTP, ns_x2_2_cycles(timings->tRTPx2)) - 1;
+ tim2 |= val << OMAP44XX_REG_T_RTP_SHIFT;
+
+ /*
+ * tXSRD = tRFCab + 10 ns. XSRD and XSNR should have the
+ * same value
+ */
+ val = ns_2_cycles(timings->tXSR) - 1;
+ tim2 |= val << OMAP44XX_REG_T_XSRD_SHIFT;
+ tim2 |= val << OMAP44XX_REG_T_XSNR_SHIFT;
+
+ val = max(min_tck->tXP, ns_x2_2_cycles(timings->tXPx2)) - 1;
+ tim2 |= val << OMAP44XX_REG_T_XP_SHIFT;
+
+ return tim2;
+}
+
+static u32 get_sdram_tim_3_reg(const struct lpddr2_ac_timings *timings,
+ const struct lpddr2_min_tck *min_tck,
+ const struct lpddr2_addressing *addressing)
+{
+ u32 tim3 = 0, val = 0;
+ val = min(timings->tRASmax * 10 / addressing->t_REFI_us_x10 - 1, 0xF);
+ tim3 |= val << OMAP44XX_REG_T_RAS_MAX_SHIFT;
+
+ val = ns_2_cycles(timings->tRFCab) - 1;
+ tim3 |= val << OMAP44XX_REG_T_RFC_SHIFT;
+
+ val = ns_x2_2_cycles(timings->tDQSCKMAXx2) - 1;
+ tim3 |= val << OMAP44XX_REG_T_TDQSCKMAX_SHIFT;
+
+ val = ns_2_cycles(timings->tZQCS) - 1;
+ tim3 |= val << OMAP44XX_REG_ZQ_ZQCS_SHIFT;
+
+ val = max(min_tck->tCKESR, ns_2_cycles(timings->tCKESR)) - 1;
+ tim3 |= val << OMAP44XX_REG_T_CKESR_SHIFT;
+
+ return tim3;
+}
+
+static u32 get_zq_config_reg(const struct lpddr2_device_details *cs1_device,
+ const struct lpddr2_addressing *addressing,
+ u8 volt_ramp)
+{
+ u32 zq = 0, val = 0;
+ if (volt_ramp)
+ val =
+ EMIF_ZQCS_INTERVAL_DVFS_IN_US * 10 /
+ addressing->t_REFI_us_x10;
+ else
+ val =
+ EMIF_ZQCS_INTERVAL_NORMAL_IN_US * 10 /
+ addressing->t_REFI_us_x10;
+ zq |= val << OMAP44XX_REG_ZQ_REFINTERVAL_SHIFT;
+
+ zq |= (REG_ZQ_ZQCL_MULT - 1) << OMAP44XX_REG_ZQ_ZQCL_MULT_SHIFT;
+
+ zq |= (REG_ZQ_ZQINIT_MULT - 1) << OMAP44XX_REG_ZQ_ZQINIT_MULT_SHIFT;
+
+ zq |= REG_ZQ_SFEXITEN_ENABLE << OMAP44XX_REG_ZQ_SFEXITEN_SHIFT;
+
+ /*
+ * Assuming that two chipselects have a single calibration resistor
+ * If there are indeed two calibration resistors, then this flag should
+ * be enabled to take advantage of dual calibration feature.
+ * This data should ideally come from board files. But considering
+ * that none of the boards today have calibration resistors per CS,
+ * it would be an unnecessary overhead.
+ */
+ zq |= REG_ZQ_DUALCALEN_DISABLE << OMAP44XX_REG_ZQ_DUALCALEN_SHIFT;
+
+ zq |= REG_ZQ_CS0EN_ENABLE << OMAP44XX_REG_ZQ_CS0EN_SHIFT;
+
+ zq |= (cs1_device ? 1 : 0) << OMAP44XX_REG_ZQ_CS1EN_SHIFT;
+
+ return zq;
+}
+
+static u32 get_temp_alert_config(const struct lpddr2_device_details *cs1_device,
+ const struct lpddr2_addressing *addressing,
+ u8 is_derated)
+{
+ u32 alert = 0, interval;
+ interval =
+ TEMP_ALERT_POLL_INTERVAL_MS * 10000 / addressing->t_REFI_us_x10;
+ if (is_derated)
+ interval *= 4;
+ alert |= interval << OMAP44XX_REG_TA_REFINTERVAL_SHIFT;
+
+ alert |= TEMP_ALERT_CONFIG_DEVCT_1 << OMAP44XX_REG_TA_DEVCNT_SHIFT;
+
+ alert |= TEMP_ALERT_CONFIG_DEVWDT_32 << OMAP44XX_REG_TA_DEVWDT_SHIFT;
+
+ alert |= 1 << OMAP44XX_REG_TA_SFEXITEN_SHIFT;
+
+ alert |= 1 << OMAP44XX_REG_TA_CS0EN_SHIFT;
+
+ alert |= (cs1_device ? 1 : 0) << OMAP44XX_REG_TA_CS1EN_SHIFT;
+
+ return alert;
+}
+
+static u32 get_read_idle_ctrl_reg(u8 volt_ramp)
+{
+ u32 idle = 0, val = 0;
+ if (volt_ramp)
+ val = ns_2_cycles(READ_IDLE_INTERVAL_DVFS) / 64 - 1;
+ else
+ /*Maximum value in normal conditions - suggested by hw team */
+ val = 0x1FF;
+ idle |= val << OMAP44XX_REG_READ_IDLE_INTERVAL_SHIFT;
+
+ idle |= EMIF_REG_READ_IDLE_LEN_VAL << OMAP44XX_REG_READ_IDLE_LEN_SHIFT;
+
+ return idle;
+}
+
+static u32 get_ddr_phy_ctrl_1(u32 freq, u8 RL)
+{
+ u32 phy = 0, val = 0;
+
+ phy |= (RL + 2) << OMAP44XX_REG_READ_LATENCY_SHIFT;
+
+ if (freq <= 100000000)
+ val = EMIF_DLL_SLAVE_DLY_CTRL_100_MHZ_AND_LESS;
+ else if (freq <= 200000000)
+ val = EMIF_DLL_SLAVE_DLY_CTRL_200_MHZ;
+ else
+ val = EMIF_DLL_SLAVE_DLY_CTRL_400_MHZ;
+ phy |= val << OMAP44XX_REG_DLL_SLAVE_DLY_CTRL_SHIFT;
+
+ /* Other fields are constant magic values. Hardcode them together */
+ phy |= EMIF_DDR_PHY_CTRL_1_BASE_VAL <<
+ OMAP44XX_EMIF_DDR_PHY_CTRL_1_BASE_VAL_SHIFT;
+
+ return phy;
+}
+
+static u32 get_emif_mem_size(struct emif_device_details *devices)
+{
+ u32 size_mbytes = 0, temp;
+
+ if (!devices)
+ return 0;
+
+ if (devices->cs0_device_details) {
+ temp = devices->cs0_device_details->density;
+ size_mbytes += lpddr2_density_2_size_in_mbytes[temp];
+ }
+
+ if (devices->cs1_device_details) {
+ temp = devices->cs1_device_details->density;
+ size_mbytes += lpddr2_density_2_size_in_mbytes[temp];
+ }
+ /* convert to bytes */
+ return size_mbytes << 20;
+}
+
+/* Gets the encoding corresponding to a given DMM section size */
+u32 get_dmm_section_size_map(u32 section_size)
+{
+ /*
+ * Section size mapping:
+ * 0x0: 16-MiB section
+ * 0x1: 32-MiB section
+ * 0x2: 64-MiB section
+ * 0x3: 128-MiB section
+ * 0x4: 256-MiB section
+ * 0x5: 512-MiB section
+ * 0x6: 1-GiB section
+ * 0x7: 2-GiB section
+ */
+ section_size >>= 24; /* divide by 16 MB */
+ return log_2_n_round_down(section_size);
+}
+
+static void emif_calculate_regs(
+ const struct emif_device_details *emif_dev_details,
+ u32 freq, struct emif_regs *regs)
+{
+ u32 temp, sys_freq;
+ const struct lpddr2_addressing *addressing;
+ const struct lpddr2_ac_timings *timings;
+ const struct lpddr2_min_tck *min_tck;
+ const struct lpddr2_device_details *cs0_dev_details =
+ emif_dev_details->cs0_device_details;
+ const struct lpddr2_device_details *cs1_dev_details =
+ emif_dev_details->cs1_device_details;
+ const struct lpddr2_device_timings *cs0_dev_timings =
+ emif_dev_details->cs0_device_timings;
+
+ emif_assert(emif_dev_details);
+ emif_assert(regs);
+ /*
+ * You can not have a device on CS1 without one on CS0
+ * So configuring EMIF without a device on CS0 doesn't
+ * make sense
+ */
+ emif_assert(cs0_dev_details);
+ emif_assert(cs0_dev_details->type != LPDDR2_TYPE_NVM);
+ /*
+ * If there is a device on CS1 it should be same type as CS0
+ * (or NVM. But NVM is not supported in this driver yet)
+ */
+ emif_assert((cs1_dev_details == NULL) ||
+ (cs1_dev_details->type == LPDDR2_TYPE_NVM) ||
+ (cs0_dev_details->type == cs1_dev_details->type));
+ emif_assert(freq <= MAX_LPDDR2_FREQ);
+
+ set_ddr_clk_period(freq);
+
+ /*
+ * The device on CS0 is used for all timing calculations
+ * There is only one set of registers for timings per EMIF. So, if the
+ * second CS(CS1) has a device, it should have the same timings as the
+ * device on CS0
+ */
+ timings = get_timings_table(cs0_dev_timings->ac_timings, freq);
+ emif_assert(timings);
+ min_tck = cs0_dev_timings->min_tck;
+
+ temp = addressing_table_index(cs0_dev_details->type,
+ cs0_dev_details->density,
+ cs0_dev_details->io_width);
+
+ emif_assert((temp >= 0));
+ addressing = &(addressing_table[temp]);
+ emif_assert(addressing);
+
+ sys_freq = get_sys_clk_freq();
+
+ regs->sdram_config_init = get_sdram_config_reg(cs0_dev_details,
+ cs1_dev_details,
+ addressing, RL_BOOT);
+
+ regs->sdram_config = get_sdram_config_reg(cs0_dev_details,
+ cs1_dev_details,
+ addressing, RL_FINAL);
+
+ regs->ref_ctrl = get_sdram_ref_ctrl(freq, addressing);
+
+ regs->sdram_tim1 = get_sdram_tim_1_reg(timings, min_tck, addressing);
+
+ regs->sdram_tim2 = get_sdram_tim_2_reg(timings, min_tck);
+
+ regs->sdram_tim3 = get_sdram_tim_3_reg(timings, min_tck, addressing);
+
+ regs->read_idle_ctrl = get_read_idle_ctrl_reg(LPDDR2_VOLTAGE_STABLE);
+
+ regs->temp_alert_config =
+ get_temp_alert_config(cs1_dev_details, addressing, 0);
+
+ regs->zq_config = get_zq_config_reg(cs1_dev_details, addressing,
+ LPDDR2_VOLTAGE_STABLE);
+
+ regs->emif_ddr_phy_ctlr_1_init =
+ get_ddr_phy_ctrl_1(sys_freq / 2, RL_BOOT);
+
+ regs->emif_ddr_phy_ctlr_1 =
+ get_ddr_phy_ctrl_1(freq, RL_FINAL);
+
+ regs->freq = freq;
+
+ print_timing_reg(regs->sdram_config_init);
+ print_timing_reg(regs->sdram_config);
+ print_timing_reg(regs->ref_ctrl);
+ print_timing_reg(regs->sdram_tim1);
+ print_timing_reg(regs->sdram_tim2);
+ print_timing_reg(regs->sdram_tim3);
+ print_timing_reg(regs->read_idle_ctrl);
+ print_timing_reg(regs->temp_alert_config);
+ print_timing_reg(regs->zq_config);
+ print_timing_reg(regs->emif_ddr_phy_ctlr_1);
+ print_timing_reg(regs->emif_ddr_phy_ctlr_1_init);
+}
+#endif /* CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS */
+
+#ifdef CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS
+/* Base AC Timing values specified by JESD209-2 for 400MHz operation */
+static const struct lpddr2_ac_timings timings_jedec_400_mhz = {
+ .max_freq = 400000000,
+ .RL = 6,
+ .tRPab = 21,
+ .tRCD = 18,
+ .tWR = 15,
+ .tRASmin = 42,
+ .tRRD = 10,
+ .tWTRx2 = 15,
+ .tXSR = 140,
+ .tXPx2 = 15,
+ .tRFCab = 130,
+ .tRTPx2 = 15,
+ .tCKE = 3,
+ .tCKESR = 15,
+ .tZQCS = 90,
+ .tZQCL = 360,
+ .tZQINIT = 1000,
+ .tDQSCKMAXx2 = 11,
+ .tRASmax = 70,
+ .tFAW = 50
+};
+
+/* Base AC Timing values specified by JESD209-2 for 333 MHz operation */
+static const struct lpddr2_ac_timings timings_jedec_333_mhz = {
+ .max_freq = 333000000,
+ .RL = 5,
+ .tRPab = 21,
+ .tRCD = 18,
+ .tWR = 15,
+ .tRASmin = 42,
+ .tRRD = 10,
+ .tWTRx2 = 15,
+ .tXSR = 140,
+ .tXPx2 = 15,
+ .tRFCab = 130,
+ .tRTPx2 = 15,
+ .tCKE = 3,
+ .tCKESR = 15,
+ .tZQCS = 90,
+ .tZQCL = 360,
+ .tZQINIT = 1000,
+ .tDQSCKMAXx2 = 11,
+ .tRASmax = 70,
+ .tFAW = 50
+};
+
+/* Base AC Timing values specified by JESD209-2 for 200 MHz operation */
+static const struct lpddr2_ac_timings timings_jedec_200_mhz = {
+ .max_freq = 200000000,
+ .RL = 3,
+ .tRPab = 21,
+ .tRCD = 18,
+ .tWR = 15,
+ .tRASmin = 42,
+ .tRRD = 10,
+ .tWTRx2 = 20,
+ .tXSR = 140,
+ .tXPx2 = 15,
+ .tRFCab = 130,
+ .tRTPx2 = 15,
+ .tCKE = 3,
+ .tCKESR = 15,
+ .tZQCS = 90,
+ .tZQCL = 360,
+ .tZQINIT = 1000,
+ .tDQSCKMAXx2 = 11,
+ .tRASmax = 70,
+ .tFAW = 50
+};
+
+/*
+ * Min tCK values specified by JESD209-2
+ * Min tCK specifies the minimum duration of some AC timing parameters in terms
+ * of the number of cycles. If the calculated number of cycles based on the
+ * absolute time value is less than the min tCK value, min tCK value should
+ * be used instead. This typically happens at low frequencies.
+ */
+static const struct lpddr2_min_tck min_tck_jedec = {
+ .tRL = 3,
+ .tRP_AB = 3,
+ .tRCD = 3,
+ .tWR = 3,
+ .tRAS_MIN = 3,
+ .tRRD = 2,
+ .tWTR = 2,
+ .tXP = 2,
+ .tRTP = 2,
+ .tCKE = 3,
+ .tCKESR = 3,
+ .tFAW = 8
+};
+
+static const struct lpddr2_ac_timings const*
+ jedec_ac_timings[MAX_NUM_SPEEDBINS] = {
+ &timings_jedec_200_mhz,
+ &timings_jedec_333_mhz,
+ &timings_jedec_400_mhz
+};
+
+static const struct lpddr2_device_timings jedec_default_timings = {
+ .ac_timings = jedec_ac_timings,
+ .min_tck = &min_tck_jedec
+};
+
+void emif_get_device_timings(u32 emif_nr,
+ const struct lpddr2_device_timings **cs0_device_timings,
+ const struct lpddr2_device_timings **cs1_device_timings)
+{
+ /* Assume Identical devices on EMIF1 & EMIF2 */
+ *cs0_device_timings = &jedec_default_timings;
+ *cs1_device_timings = &jedec_default_timings;
+}
+#endif /* CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS */
+
+#ifdef CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION
+const char *get_lpddr2_type(u8 type_id)
+{
+ switch (type_id) {
+ case LPDDR2_TYPE_S4:
+ return "LPDDR2-S4";
+ case LPDDR2_TYPE_S2:
+ return "LPDDR2-S2";
+ default:
+ return NULL;
+ }
+}
+
+const char *get_lpddr2_io_width(u8 width_id)
+{
+ switch (width_id) {
+ case LPDDR2_IO_WIDTH_8:
+ return "x8";
+ case LPDDR2_IO_WIDTH_16:
+ return "x16";
+ case LPDDR2_IO_WIDTH_32:
+ return "x32";
+ default:
+ return NULL;
+ }
+}
+
+const char *get_lpddr2_manufacturer(u32 manufacturer)
+{
+ switch (manufacturer) {
+ case LPDDR2_MANUFACTURER_SAMSUNG:
+ return "Samsung";
+ case LPDDR2_MANUFACTURER_QIMONDA:
+ return "Qimonda";
+ case LPDDR2_MANUFACTURER_ELPIDA:
+ return "Elpida";
+ case LPDDR2_MANUFACTURER_ETRON:
+ return "Etron";
+ case LPDDR2_MANUFACTURER_NANYA:
+ return "Nanya";
+ case LPDDR2_MANUFACTURER_HYNIX:
+ return "Hynix";
+ case LPDDR2_MANUFACTURER_MOSEL:
+ return "Mosel";
+ case LPDDR2_MANUFACTURER_WINBOND:
+ return "Winbond";
+ case LPDDR2_MANUFACTURER_ESMT:
+ return "ESMT";
+ case LPDDR2_MANUFACTURER_SPANSION:
+ return "Spansion";
+ case LPDDR2_MANUFACTURER_SST:
+ return "SST";
+ case LPDDR2_MANUFACTURER_ZMOS:
+ return "ZMOS";
+ case LPDDR2_MANUFACTURER_INTEL:
+ return "Intel";
+ case LPDDR2_MANUFACTURER_NUMONYX:
+ return "Numonyx";
+ case LPDDR2_MANUFACTURER_MICRON:
+ return "Micron";
+ default:
+ return NULL;
+ }
+}
+
+static void display_sdram_details(u32 emif_nr, u32 cs,
+ struct lpddr2_device_details *device)
+{
+ const char *mfg_str;
+ const char *type_str;
+ char density_str[10];
+ u32 density;
+
+ debug("EMIF%d CS%d\t", emif_nr, cs);
+
+ if (!device) {
+ debug("None\n");
+ return;
+ }
+
+ mfg_str = get_lpddr2_manufacturer(device->manufacturer);
+ type_str = get_lpddr2_type(device->type);
+
+ density = lpddr2_density_2_size_in_mbytes[device->density];
+ if ((density / 1024 * 1024) == density) {
+ density /= 1024;
+ sprintf(density_str, "%d GB", density);
+ } else
+ sprintf(density_str, "%d MB", density);
+ if (mfg_str && type_str)
+ debug("%s\t\t%s\t%s\n", mfg_str, type_str, density_str);
+}
+
+static u8 is_lpddr2_sdram_present(u32 base, u32 cs,
+ struct lpddr2_device_details *lpddr2_device)
+{
+ u32 mr = 0, temp;
+
+ mr = get_mr(base, cs, LPDDR2_MR0);
+ if (mr > 0xFF) {
+ /* Mode register value bigger than 8 bit */
+ return 0;
+ }
+
+ temp = (mr & LPDDR2_MR0_DI_MASK) >> LPDDR2_MR0_DI_SHIFT;
+ if (temp) {
+ /* Not SDRAM */
+ return 0;
+ }
+ temp = (mr & LPDDR2_MR0_DNVI_MASK) >> LPDDR2_MR0_DNVI_SHIFT;
+
+ if (temp) {
+ /* DNV supported - But DNV is only supported for NVM */
+ return 0;
+ }
+
+ mr = get_mr(base, cs, LPDDR2_MR4);
+ if (mr > 0xFF) {
+ /* Mode register value bigger than 8 bit */
+ return 0;
+ }
+
+ mr = get_mr(base, cs, LPDDR2_MR5);
+ if (mr >= 0xFF) {
+ /* Mode register value bigger than 8 bit */
+ return 0;
+ }
+
+ if (!get_lpddr2_manufacturer(mr)) {
+ /* Manufacturer not identified */
+ return 0;
+ }
+ lpddr2_device->manufacturer = mr;
+
+ mr = get_mr(base, cs, LPDDR2_MR6);
+ if (mr >= 0xFF) {
+ /* Mode register value bigger than 8 bit */
+ return 0;
+ }
+
+ mr = get_mr(base, cs, LPDDR2_MR7);
+ if (mr >= 0xFF) {
+ /* Mode register value bigger than 8 bit */
+ return 0;
+ }
+
+ mr = get_mr(base, cs, LPDDR2_MR8);
+ if (mr >= 0xFF) {
+ /* Mode register value bigger than 8 bit */
+ return 0;
+ }
+
+ temp = (mr & MR8_TYPE_MASK) >> MR8_TYPE_SHIFT;
+ if (!get_lpddr2_type(temp)) {
+ /* Not SDRAM */
+ return 0;
+ }
+ lpddr2_device->type = temp;
+
+ temp = (mr & MR8_DENSITY_MASK) >> MR8_DENSITY_SHIFT;
+ if (temp > LPDDR2_DENSITY_32Gb) {
+ /* Density not supported */
+ return 0;
+ }
+ lpddr2_device->density = temp;
+
+ temp = (mr & MR8_IO_WIDTH_MASK) >> MR8_IO_WIDTH_SHIFT;
+ if (!get_lpddr2_io_width(temp)) {
+ /* IO width unsupported value */
+ return 0;
+ }
+ lpddr2_device->io_width = temp;
+
+ /*
+ * If all the above tests pass we should
+ * have a device on this chip-select
+ */
+ return 1;
+}
+
+static struct lpddr2_device_details *get_lpddr2_details(u32 base, u8 cs,
+ struct lpddr2_device_details *lpddr2_dev_details)
+{
+ u32 phy;
+ struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
+
+ if (!lpddr2_dev_details)
+ return NULL;
+
+ /* Do the minimum init for mode register accesses */
+ if (!running_from_sdram()) {
+ phy = get_ddr_phy_ctrl_1(get_sys_clk_freq() / 2, RL_BOOT);
+ writel(phy, &emif->emif_ddr_phy_ctrl_1);
+ }
+
+ if (!(is_lpddr2_sdram_present(base, cs, lpddr2_dev_details)))
+ return NULL;
+
+ display_sdram_details(emif_num(base), cs, lpddr2_dev_details);
+
+ return lpddr2_dev_details;
+}
+
+void emif_get_device_details(u32 emif_nr,
+ struct lpddr2_device_details *cs0_device_details,
+ struct lpddr2_device_details *cs1_device_details)
+{
+ u32 base = (emif_nr == 1) ? OMAP44XX_EMIF1 : OMAP44XX_EMIF2;
+
+ if (running_from_sdram()) {
+ /*
+ * We can not do automatic discovery running from SDRAM
+ * Most likely we came here by mistake. Indicate error
+ * by returning NULL
+ */
+ cs0_device_details = NULL;
+ cs1_device_details = NULL;
+ } else {
+ /*
+ * Automatically find the device details:
+ *
+ * Reset the PHY after each call to get_lpddr2_details().
+ * If there is nothing connected to a given chip select
+ * (typically CS1) mode register reads will mess up with
+ * the PHY state and subsequent initialization won't work.
+ * PHY reset brings back PHY to a good state.
+ */
+ cs0_device_details =
+ get_lpddr2_details(base, CS0, cs0_device_details);
+ emif_reset_phy(base);
+
+ cs1_device_details =
+ get_lpddr2_details(base, CS1, cs1_device_details);
+ emif_reset_phy(base);
+ }
+}
+#endif /* CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION */
+
+static void do_sdram_init(u32 base)
+{
+ const struct emif_regs *regs;
+ u32 in_sdram, emif_nr;
+
+ debug(">>do_sdram_init() %x\n", base);
+
+ in_sdram = running_from_sdram();
+ emif_nr = (base == OMAP44XX_EMIF1) ? 1 : 2;
+
+#ifdef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
+ emif_get_reg_dump(emif_nr, ®s);
+ if (!regs) {
+ debug("EMIF: reg dump not provided\n");
+ return;
+ }
+#else
+ /*
+ * The user has not provided the register values. We need to
+ * calculate it based on the timings and the DDR frequency
+ */
+ struct emif_device_details dev_details;
+ struct emif_regs calculated_regs;
+
+ /*
+ * Get device details:
+ * - Discovered if CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION is set
+ * - Obtained from user otherwise
+ */
+ struct lpddr2_device_details cs0_dev_details, cs1_dev_details;
+ emif_get_device_details(emif_nr, &cs0_dev_details,
+ &cs1_dev_details);
+ dev_details.cs0_device_details = &cs0_dev_details;
+ dev_details.cs1_device_details = &cs1_dev_details;
+
+ /* Return if no devices on this EMIF */
+ if (!dev_details.cs0_device_details &&
+ !dev_details.cs1_device_details) {
+ emif_sizes[emif_nr - 1] = 0;
+ return;
+ }
+
+ if (!in_sdram)
+ emif_sizes[emif_nr - 1] = get_emif_mem_size(&dev_details);
+
+ /*
+ * Get device timings:
+ * - Default timings specified by JESD209-2 if
+ * CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS is set
+ * - Obtained from user otherwise
+ */
+ emif_get_device_timings(emif_nr, &dev_details.cs0_device_timings,
+ &dev_details.cs1_device_timings);
+
+ /* Calculate the register values */
+ emif_calculate_regs(&dev_details, omap4_ddr_clk(), &calculated_regs);
+ regs = &calculated_regs;
+#endif /* CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS */
+
+ /*
+ * Initializing the LPDDR2 device can not happen from SDRAM.
+ * Changing the timing registers in EMIF can happen(going from one
+ * OPP to another)
+ */
+ if (!in_sdram)
+ lpddr2_init(base, regs);
+
+ /* Write to the shadow registers */
+ emif_update_timings(base, regs);
+
+ debug("<<do_sdram_init() %x\n", base);
+}
+
+void sdram_init_pads(void)
+{
+ u32 lpddr2io;
+ struct control_lpddr2io_regs *lpddr2io_regs =
+ (struct control_lpddr2io_regs *)LPDDR2_IO_REGS_BASE;
+ u32 omap4_rev = omap_revision();
+
+ if (omap4_rev == OMAP4430_ES1_0)
+ lpddr2io = CONTROL_LPDDR2IO_SLEW_125PS_DRV8_PULL_DOWN;
+ else if (omap4_rev == OMAP4430_ES2_0)
+ lpddr2io = CONTROL_LPDDR2IO_SLEW_325PS_DRV8_GATE_KEEPER;
+ else
+ return; /* Post ES2.1 reset values will work */
+
+ writel(lpddr2io, &lpddr2io_regs->control_lpddr2io1_0);
+ writel(lpddr2io, &lpddr2io_regs->control_lpddr2io1_1);
+ writel(lpddr2io, &lpddr2io_regs->control_lpddr2io1_2);
+ writel(lpddr2io, &lpddr2io_regs->control_lpddr2io2_0);
+ writel(lpddr2io, &lpddr2io_regs->control_lpddr2io2_1);
+ writel(lpddr2io, &lpddr2io_regs->control_lpddr2io2_2);
+
+ writel(CONTROL_EFUSE_2_NMOS_PMOS_PTV_CODE_1, CONTROL_EFUSE_2);
+}
+
+static void emif_post_init_config(u32 base)
+{
+ struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
+ u32 omap4_rev = omap_revision();
+
+ /* reset phy on ES2.0 */
+ if (omap4_rev == OMAP4430_ES2_0)
+ emif_reset_phy(base);
+
+ /* Put EMIF back in smart idle on ES1.0 */
+ if (omap4_rev == OMAP4430_ES1_0)
+ writel(0x80000000, &emif->emif_pwr_mgmt_ctrl);
+}
+
+static void dmm_init(u32 base)
+{
+ const struct dmm_lisa_map_regs *lisa_map_regs;
+
+#ifdef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
+ emif_get_dmm_regs(&lisa_map_regs);
+#else
+ u32 emif1_size, emif2_size, mapped_size, section_map = 0;
+ u32 section_cnt, sys_addr;
+ struct dmm_lisa_map_regs lis_map_regs_calculated = {0};
+
+ mapped_size = 0;
+ section_cnt = 3;
+ sys_addr = CONFIG_SYS_SDRAM_BASE;
+ emif1_size = emif_sizes[0];
+ emif2_size = emif_sizes[1];
+ debug("emif1_size 0x%x emif2_size 0x%x\n", emif1_size, emif2_size);
+
+ if (!emif1_size && !emif2_size)
+ return;
+
+ /* symmetric interleaved section */
+ if (emif1_size && emif2_size) {
+ mapped_size = min(emif1_size, emif2_size);
+ section_map = DMM_LISA_MAP_INTERLEAVED_BASE_VAL;
+ section_map |= 0 << OMAP44XX_SDRC_ADDR_SHIFT;
+ /* only MSB */
+ section_map |= (sys_addr >> 24) <<
+ OMAP44XX_SYS_ADDR_SHIFT;
+ section_map |= get_dmm_section_size_map(mapped_size * 2)
+ << OMAP44XX_SYS_SIZE_SHIFT;
+ lis_map_regs_calculated.dmm_lisa_map_3 = section_map;
+ emif1_size -= mapped_size;
+ emif2_size -= mapped_size;
+ sys_addr += (mapped_size * 2);
+ section_cnt--;
+ }
+
+ /*
+ * Single EMIF section(we can have a maximum of 1 single EMIF
+ * section- either EMIF1 or EMIF2 or none, but not both)
+ */
+ if (emif1_size) {
+ section_map = DMM_LISA_MAP_EMIF1_ONLY_BASE_VAL;
+ section_map |= get_dmm_section_size_map(emif1_size)
+ << OMAP44XX_SYS_SIZE_SHIFT;
+ /* only MSB */
+ section_map |= (mapped_size >> 24) <<
+ OMAP44XX_SDRC_ADDR_SHIFT;
+ /* only MSB */
+ section_map |= (sys_addr >> 24) << OMAP44XX_SYS_ADDR_SHIFT;
+ section_cnt--;
+ }
+ if (emif2_size) {
+ section_map = DMM_LISA_MAP_EMIF2_ONLY_BASE_VAL;
+ section_map |= get_dmm_section_size_map(emif2_size) <<
+ OMAP44XX_SYS_SIZE_SHIFT;
+ /* only MSB */
+ section_map |= mapped_size >> 24 << OMAP44XX_SDRC_ADDR_SHIFT;
+ /* only MSB */
+ section_map |= sys_addr >> 24 << OMAP44XX_SYS_ADDR_SHIFT;
+ section_cnt--;
+ }
+
+ if (section_cnt == 2) {
+ /* Only 1 section - either symmetric or single EMIF */
+ lis_map_regs_calculated.dmm_lisa_map_3 = section_map;
+ lis_map_regs_calculated.dmm_lisa_map_2 = 0;
+ lis_map_regs_calculated.dmm_lisa_map_1 = 0;
+ } else {
+ /* 2 sections - 1 symmetric, 1 single EMIF */
+ lis_map_regs_calculated.dmm_lisa_map_2 = section_map;
+ lis_map_regs_calculated.dmm_lisa_map_1 = 0;
+ }
+
+ /* TRAP for invalid TILER mappings in section 0 */
+ lis_map_regs_calculated.dmm_lisa_map_0 = DMM_LISA_MAP_0_INVAL_ADDR_TRAP;
+
+ lisa_map_regs = &lis_map_regs_calculated;
+#endif
+ struct dmm_lisa_map_regs *hw_lisa_map_regs =
+ (struct dmm_lisa_map_regs *)base;
+
+ writel(0, &hw_lisa_map_regs->dmm_lisa_map_3);
+ writel(0, &hw_lisa_map_regs->dmm_lisa_map_2);
+ writel(0, &hw_lisa_map_regs->dmm_lisa_map_1);
+ writel(0, &hw_lisa_map_regs->dmm_lisa_map_0);
+
+ writel(lisa_map_regs->dmm_lisa_map_3,
+ &hw_lisa_map_regs->dmm_lisa_map_3);
+ writel(lisa_map_regs->dmm_lisa_map_2,
+ &hw_lisa_map_regs->dmm_lisa_map_2);
+ writel(lisa_map_regs->dmm_lisa_map_1,
+ &hw_lisa_map_regs->dmm_lisa_map_1);
+ writel(lisa_map_regs->dmm_lisa_map_0,
+ &hw_lisa_map_regs->dmm_lisa_map_0);
+
+ if (omap_revision() >= OMAP4460_ES1_0) {
+ hw_lisa_map_regs =
+ (struct dmm_lisa_map_regs *)OMAP44XX_MA_LISA_MAP_BASE;
+
+ writel(lisa_map_regs->dmm_lisa_map_3,
+ &hw_lisa_map_regs->dmm_lisa_map_3);
+ writel(lisa_map_regs->dmm_lisa_map_2,
+ &hw_lisa_map_regs->dmm_lisa_map_2);
+ writel(lisa_map_regs->dmm_lisa_map_1,
+ &hw_lisa_map_regs->dmm_lisa_map_1);
+ writel(lisa_map_regs->dmm_lisa_map_0,
+ &hw_lisa_map_regs->dmm_lisa_map_0);
+ }
+}
+
+/*
+ * SDRAM initialization:
+ * SDRAM initialization has two parts:
+ * 1. Configuring the SDRAM device
+ * 2. Update the AC timings related parameters in the EMIF module
+ * (1) should be done only once and should not be done while we are
+ * running from SDRAM.
+ * (2) can and should be done more than once if OPP changes.
+ * Particularly, this may be needed when we boot without SPL and
+ * and using Configuration Header(CH). ROM code supports only at 50% OPP
+ * at boot (low power boot). So u-boot has to switch to OPP100 and update
+ * the frequency. So,
+ * Doing (1) and (2) makes sense - first time initialization
+ * Doing (2) and not (1) makes sense - OPP change (when using CH)
+ * Doing (1) and not (2) doen't make sense
+ * See do_sdram_init() for the details
+ */
+void sdram_init(void)
+{
+ u32 in_sdram, size_prog, size_detect;
+
+ debug(">>sdram_init()\n");
+
+ if (omap4_hw_init_context() == OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL)
+ return;
+
+ in_sdram = running_from_sdram();
+ debug("in_sdram = %d\n", in_sdram);
+
+ if (!in_sdram) {
+ sdram_init_pads();
+ bypass_dpll(&prcm->cm_clkmode_dpll_core);
+ }
+
+ do_sdram_init(OMAP44XX_EMIF1);
+ do_sdram_init(OMAP44XX_EMIF2);
+
+ if (!in_sdram) {
+ dmm_init(OMAP44XX_DMM_LISA_MAP_BASE);
+ emif_post_init_config(OMAP44XX_EMIF1);
+ emif_post_init_config(OMAP44XX_EMIF2);
+
+ }
+
+ /* for the shadow registers to take effect */
+ freq_update_core();
+
+ /* Do some testing after the init */
+ if (!in_sdram) {
+ size_prog = omap4_sdram_size();
+ size_detect = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE,
+ size_prog);
+ /* Compare with the size programmed */
+ if (size_detect != size_prog) {
+ printf("SDRAM: identified size not same as expected"
+ " size identified: %x expected: %x\n",
+ size_detect,
+ size_prog);
+ } else
+ debug("get_ram_size() successful");
+ }
+
+ debug("<<sdram_init()\n");
+}
diff --git a/arch/arm/cpu/armv7/omap4/lowlevel_init.S b/arch/arm/cpu/armv7/omap4/lowlevel_init.S
index 6abfbba..91525ec 100644
--- a/arch/arm/cpu/armv7/omap4/lowlevel_init.S
+++ b/arch/arm/cpu/armv7/omap4/lowlevel_init.S
@@ -27,6 +27,37 @@
*/
#include <asm/arch/omap4.h>
+#ifdef CONFIG_SPL_BUILD
+.global save_boot_params
+save_boot_params:
+ /*
+ * See if the rom code passed pointer is valid:
+ * It is not valid if it is not in non-secure SRAM
+ * This may happen if you are booting with the help of
+ * debugger
+ */
+ ldr r2, =NON_SECURE_SRAM_START
+ cmp r2, r0
+ bgt 1f
+ ldr r2, =NON_SECURE_SRAM_END
+ cmp r2, r0
+ blt 1f
+
+ /* Store the boot device in omap4_boot_device */
+ ldr r2, [r0, #BOOT_DEVICE_OFFSET] @ r1 <- value of boot device
+ and r2, #BOOT_DEVICE_MASK
+ ldr r3, =omap4_boot_device
+ str r2, [r3] @ omap4_boot_device <- r1
+
+ /* Store the boot mode (raw/FAT) in omap4_boot_mode */
+ ldr r2, [r0, #DEV_DESC_PTR_OFFSET] @ get the device descriptor ptr
+ ldr r2, [r2, #DEV_DATA_PTR_OFFSET] @ get the pDeviceData ptr
+ ldr r2, [r2, #BOOT_MODE_OFFSET] @ get the boot mode
+ ldr r3, =omap4_boot_mode
+ str r2, [r3]
+1:
+ bx lr
+#endif
.globl lowlevel_init
lowlevel_init:
diff --git a/arch/arm/cpu/armv7/omap4/omap4_mux_data.h b/arch/arm/cpu/armv7/omap4/omap4_mux_data.h
new file mode 100644
index 0000000..00c52f8
--- /dev/null
+++ b/arch/arm/cpu/armv7/omap4/omap4_mux_data.h
@@ -0,0 +1,76 @@
+ /*
+ * (C) Copyright 2010
+ * Texas Instruments Incorporated, <www.ti.com>
+ *
+ * Balaji Krishnamoorthy <balajitk@ti.com>
+ * Aneesh V <aneesh@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef _OMAP4_MUX_DATA_H_
+#define _OMAP4_MUX_DATA_H_
+
+#include <asm/arch/mux_omap4.h>
+
+const struct pad_conf_entry core_padconf_array_essential[] = {
+
+{GPMC_AD0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat0 */
+{GPMC_AD1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat1 */
+{GPMC_AD2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat2 */
+{GPMC_AD3, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat3 */
+{GPMC_AD4, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat4 */
+{GPMC_AD5, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat5 */
+{GPMC_AD6, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat6 */
+{GPMC_AD7, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat7 */
+{GPMC_NOE, (PTU | IEN | OFF_EN | OFF_OUT_PTD | M1)}, /* sdmmc2_clk */
+{GPMC_NWE, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_cmd */
+{SDMMC1_CLK, (PTU | OFF_EN | OFF_OUT_PTD | M0)}, /* sdmmc1_clk */
+{SDMMC1_CMD, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_cmd */
+{SDMMC1_DAT0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat0 */
+{SDMMC1_DAT1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat1 */
+{SDMMC1_DAT2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat2 */
+{SDMMC1_DAT3, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat3 */
+{SDMMC1_DAT4, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat4 */
+{SDMMC1_DAT5, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat5 */
+{SDMMC1_DAT6, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat6 */
+{SDMMC1_DAT7, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat7 */
+{I2C1_SCL, (PTU | IEN | M0)}, /* i2c1_scl */
+{I2C1_SDA, (PTU | IEN | M0)}, /* i2c1_sda */
+{I2C2_SCL, (PTU | IEN | M0)}, /* i2c2_scl */
+{I2C2_SDA, (PTU | IEN | M0)}, /* i2c2_sda */
+{I2C3_SCL, (PTU | IEN | M0)}, /* i2c3_scl */
+{I2C3_SDA, (PTU | IEN | M0)}, /* i2c3_sda */
+{I2C4_SCL, (PTU | IEN | M0)}, /* i2c4_scl */
+{I2C4_SDA, (PTU | IEN | M0)}, /* i2c4_sda */
+{UART3_CTS_RCTX, (PTU | IEN | M0)}, /* uart3_tx */
+{UART3_RTS_SD, (M0)}, /* uart3_rts_sd */
+{UART3_RX_IRRX, (IEN | M0)}, /* uart3_rx */
+{UART3_TX_IRTX, (M0)} /* uart3_tx */
+
+};
+
+const struct pad_conf_entry wkup_padconf_array_essential[] = {
+
+{PAD1_SR_SCL, (PTU | IEN | M0)}, /* sr_scl */
+{PAD0_SR_SDA, (PTU | IEN | M0)}, /* sr_sda */
+{PAD1_SYS_32K, (IEN | M0)} /* sys_32k */
+
+};
+
+#endif /* _OMAP4_MUX_DATA_H_ */
diff --git a/arch/arm/cpu/armv7/omap4/sdram_elpida.c b/arch/arm/cpu/armv7/omap4/sdram_elpida.c
new file mode 100644
index 0000000..7757aad
--- /dev/null
+++ b/arch/arm/cpu/armv7/omap4/sdram_elpida.c
@@ -0,0 +1,282 @@
+/*
+ * Timing and Organization details of the Elpida parts used in OMAP4
+ * SDPs and Panda
+ *
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ *
+ * Aneesh V <aneesh@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <asm/arch/emif.h>
+#include <asm/arch/sys_proto.h>
+
+/*
+ * This file provides details of the LPDDR2 SDRAM parts used on OMAP4430
+ * SDP and Panda. Since the parts used and geometry are identical for
+ * SDP and Panda for a given OMAP4 revision, this information is kept
+ * here instead of being in board directory. However the key functions
+ * exported are weakly linked so that they can be over-ridden in the board
+ * directory if there is a OMAP4 board in the future that uses a different
+ * memory device or geometry.
+ *
+ * For any new board with different memory devices over-ride one or more
+ * of the following functions as per the CONFIG flags you intend to enable:
+ * - emif_get_reg_dump()
+ * - emif_get_dmm_regs()
+ * - emif_get_device_details()
+ * - emif_get_device_timings()
+ */
+
+#ifdef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
+
+static const struct emif_regs emif_regs_elpida_200_mhz_2cs = {
+ .sdram_config_init = 0x80000eb9,
+ .sdram_config = 0x80001ab9,
+ .ref_ctrl = 0x0000030c,
+ .sdram_tim1 = 0x08648311,
+ .sdram_tim2 = 0x101b06ca,
+ .sdram_tim3 = 0x0048a19f,
+ .read_idle_ctrl = 0x000501ff,
+ .zq_config = 0x500b3214,
+ .temp_alert_config = 0xd8016893,
+ .emif_ddr_phy_ctlr_1_init = 0x049ffff5,
+ .emif_ddr_phy_ctlr_1 = 0x049ff808
+};
+
+static const struct emif_regs emif_regs_elpida_380_mhz_1cs = {
+ .sdram_config_init = 0x80000eb1,
+ .sdram_config = 0x80001ab1,
+ .ref_ctrl = 0x000005cd,
+ .sdram_tim1 = 0x10cb0622,
+ .sdram_tim2 = 0x20350d52,
+ .sdram_tim3 = 0x00b1431f,
+ .read_idle_ctrl = 0x000501ff,
+ .zq_config = 0x500b3214,
+ .temp_alert_config = 0x58016893,
+ .emif_ddr_phy_ctlr_1_init = 0x049ffff5,
+ .emif_ddr_phy_ctlr_1 = 0x049ff418
+};
+
+const struct emif_regs emif_regs_elpida_400_mhz_2cs = {
+ .sdram_config_init = 0x80000eb9,
+ .sdram_config = 0x80001ab9,
+ .ref_ctrl = 0x00000618,
+ .sdram_tim1 = 0x10eb0662,
+ .sdram_tim2 = 0x20370dd2,
+ .sdram_tim3 = 0x00b1c33f,
+ .read_idle_ctrl = 0x000501ff,
+ .zq_config = 0xd00b3214,
+ .temp_alert_config = 0xd8016893,
+ .emif_ddr_phy_ctlr_1_init = 0x049ffff5,
+ .emif_ddr_phy_ctlr_1 = 0x049ff418
+};
+const struct dmm_lisa_map_regs lisa_map_2G_x_1_x_2 = {
+ .dmm_lisa_map_0 = 0xFF020100,
+ .dmm_lisa_map_1 = 0,
+ .dmm_lisa_map_2 = 0,
+ .dmm_lisa_map_3 = 0x80540300
+};
+
+const struct dmm_lisa_map_regs lisa_map_2G_x_2_x_2 = {
+ .dmm_lisa_map_0 = 0xFF020100,
+ .dmm_lisa_map_1 = 0,
+ .dmm_lisa_map_2 = 0,
+ .dmm_lisa_map_3 = 0x80640300
+};
+
+static void emif_get_reg_dump_sdp(u32 emif_nr, const struct emif_regs **regs)
+{
+ u32 omap4_rev = omap_revision();
+
+ /* Same devices and geometry on both EMIFs */
+ if (omap4_rev == OMAP4430_ES1_0)
+ *regs = &emif_regs_elpida_380_mhz_1cs;
+ else if (omap4_rev == OMAP4430_ES2_0)
+ *regs = &emif_regs_elpida_200_mhz_2cs;
+ else
+ *regs = &emif_regs_elpida_400_mhz_2cs;
+}
+void emif_get_reg_dump(u32 emif_nr, const struct emif_regs **regs)
+ __attribute__((weak, alias("emif_get_reg_dump_sdp")));
+
+static void emif_get_dmm_regs_sdp(const struct dmm_lisa_map_regs
+ **dmm_lisa_regs)
+{
+ u32 omap_rev = omap_revision();
+
+ if (omap_rev == OMAP4430_ES1_0)
+ *dmm_lisa_regs = &lisa_map_2G_x_1_x_2;
+ else
+ *dmm_lisa_regs = &lisa_map_2G_x_2_x_2;
+}
+
+void emif_get_dmm_regs(const struct dmm_lisa_map_regs **dmm_lisa_regs)
+ __attribute__((weak, alias("emif_get_dmm_regs_sdp")));
+
+#else
+
+static const struct lpddr2_device_details elpida_2G_S4_details = {
+ .type = LPDDR2_TYPE_S4,
+ .density = LPDDR2_DENSITY_2Gb,
+ .io_width = LPDDR2_IO_WIDTH_32,
+ .manufacturer = LPDDR2_MANUFACTURER_ELPIDA
+};
+
+static void emif_get_device_details_sdp(u32 emif_nr,
+ struct lpddr2_device_details *cs0_device_details,
+ struct lpddr2_device_details *cs1_device_details)
+{
+ u32 omap_rev = omap_revision();
+
+ /* EMIF1 & EMIF2 have identical configuration */
+ *cs0_device_details = elpida_2G_S4_details;
+
+ if (omap_rev == OMAP4430_ES1_0)
+ cs1_device_details = NULL;
+ else
+ *cs1_device_details = elpida_2G_S4_details;
+}
+
+void emif_get_device_details(u32 emif_nr,
+ struct lpddr2_device_details *cs0_device_details,
+ struct lpddr2_device_details *cs1_device_details)
+ __attribute__((weak, alias("emif_get_device_details_sdp")));
+
+#endif /* CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS */
+
+#ifndef CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS
+static const struct lpddr2_ac_timings timings_elpida_400_mhz = {
+ .max_freq = 400000000,
+ .RL = 6,
+ .tRPab = 21,
+ .tRCD = 18,
+ .tWR = 15,
+ .tRASmin = 42,
+ .tRRD = 10,
+ .tWTRx2 = 15,
+ .tXSR = 140,
+ .tXPx2 = 15,
+ .tRFCab = 130,
+ .tRTPx2 = 15,
+ .tCKE = 3,
+ .tCKESR = 15,
+ .tZQCS = 90,
+ .tZQCL = 360,
+ .tZQINIT = 1000,
+ .tDQSCKMAXx2 = 11,
+ .tRASmax = 70,
+ .tFAW = 50
+};
+
+static const struct lpddr2_ac_timings timings_elpida_333_mhz = {
+ .max_freq = 333000000,
+ .RL = 5,
+ .tRPab = 21,
+ .tRCD = 18,
+ .tWR = 15,
+ .tRASmin = 42,
+ .tRRD = 10,
+ .tWTRx2 = 15,
+ .tXSR = 140,
+ .tXPx2 = 15,
+ .tRFCab = 130,
+ .tRTPx2 = 15,
+ .tCKE = 3,
+ .tCKESR = 15,
+ .tZQCS = 90,
+ .tZQCL = 360,
+ .tZQINIT = 1000,
+ .tDQSCKMAXx2 = 11,
+ .tRASmax = 70,
+ .tFAW = 50
+};
+
+static const struct lpddr2_ac_timings timings_elpida_200_mhz = {
+ .max_freq = 200000000,
+ .RL = 3,
+ .tRPab = 21,
+ .tRCD = 18,
+ .tWR = 15,
+ .tRASmin = 42,
+ .tRRD = 10,
+ .tWTRx2 = 20,
+ .tXSR = 140,
+ .tXPx2 = 15,
+ .tRFCab = 130,
+ .tRTPx2 = 15,
+ .tCKE = 3,
+ .tCKESR = 15,
+ .tZQCS = 90,
+ .tZQCL = 360,
+ .tZQINIT = 1000,
+ .tDQSCKMAXx2 = 11,
+ .tRASmax = 70,
+ .tFAW = 50
+};
+
+static const struct lpddr2_min_tck min_tck_elpida = {
+ .tRL = 3,
+ .tRP_AB = 3,
+ .tRCD = 3,
+ .tWR = 3,
+ .tRAS_MIN = 3,
+ .tRRD = 2,
+ .tWTR = 2,
+ .tXP = 2,
+ .tRTP = 2,
+ .tCKE = 3,
+ .tCKESR = 3,
+ .tFAW = 8
+};
+
+static const struct lpddr2_ac_timings *elpida_ac_timings[MAX_NUM_SPEEDBINS] = {
+ &timings_elpida_200_mhz,
+ &timings_elpida_333_mhz,
+ &timings_elpida_400_mhz
+};
+
+static const struct lpddr2_device_timings elpida_2G_S4_timings = {
+ .ac_timings = elpida_ac_timings,
+ .min_tck = &min_tck_elpida,
+};
+
+void emif_get_device_timings_sdp(u32 emif_nr,
+ const struct lpddr2_device_timings **cs0_device_timings,
+ const struct lpddr2_device_timings **cs1_device_timings)
+{
+ u32 omap_rev = omap_revision();
+
+ /* Identical devices on EMIF1 & EMIF2 */
+ *cs0_device_timings = &elpida_2G_S4_timings;
+
+ if (omap_rev == OMAP4430_ES1_0)
+ *cs1_device_timings = NULL;
+ else
+ *cs1_device_timings = &elpida_2G_S4_timings;
+}
+
+void emif_get_device_timings(u32 emif_nr,
+ const struct lpddr2_device_timings **cs0_device_timings,
+ const struct lpddr2_device_timings **cs1_device_timings)
+ __attribute__((weak, alias("emif_get_device_timings_sdp")));
+
+#endif /* CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS */
diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S
index 5c87e9c..db8e9d2 100644
--- a/arch/arm/cpu/armv7/start.S
+++ b/arch/arm/cpu/armv7/start.S
@@ -42,7 +42,16 @@
ldr pc, _not_used
ldr pc, _irq
ldr pc, _fiq
-
+#ifdef CONFIG_SPL_BUILD
+_undefined_instruction: .word _undefined_instruction
+_software_interrupt: .word _software_interrupt
+_prefetch_abort: .word _prefetch_abort
+_data_abort: .word _data_abort
+_not_used: .word _not_used
+_irq: .word _irq
+_fiq: .word _fiq
+_pad: .word 0x12345678 /* now 16*4=64 */
+#else
_undefined_instruction: .word undefined_instruction
_software_interrupt: .word software_interrupt
_prefetch_abort: .word prefetch_abort
@@ -51,6 +60,8 @@
_irq: .word irq
_fiq: .word fiq
_pad: .word 0x12345678 /* now 16*4=64 */
+#endif /* CONFIG_SPL_BUILD */
+
.global _end_vect
_end_vect:
@@ -89,6 +100,10 @@
_bss_start_ofs:
.word __bss_start - _start
+.global _image_copy_end_ofs
+_image_copy_end_ofs:
+ .word __image_copy_end - _start
+
.globl _bss_end_ofs
_bss_end_ofs:
.word __bss_end__ - _start
@@ -119,6 +134,7 @@
*/
reset:
+ bl save_boot_params
/*
* set the cpu to SVC32 mode
*/
@@ -182,12 +198,11 @@
mov sp, r4
adr r0, _start
-#ifndef CONFIG_SPL_BUILD
cmp r0, r6
+ moveq r9, #0 /* no relocation. relocation offset(r9) = 0 */
beq clear_bss /* skip relocation */
-#endif
mov r1, r6 /* r1 <- scratch for copy_loop */
- ldr r3, _bss_start_ofs
+ ldr r3, _image_copy_end_ofs
add r2, r0, r3 /* r2 <- source end address */
copy_loop:
@@ -235,20 +250,34 @@
add r2, r2, #8 /* each rel.dyn entry is 8 bytes */
cmp r2, r3
blo fixloop
+ b clear_bss
+_rel_dyn_start_ofs:
+ .word __rel_dyn_start - _start
+_rel_dyn_end_ofs:
+ .word __rel_dyn_end - _start
+_dynsym_start_ofs:
+ .word __dynsym_start - _start
+
+#endif /* #ifndef CONFIG_SPL_BUILD */
clear_bss:
+#ifdef CONFIG_SPL_BUILD
+ /* No relocation for SPL */
+ ldr r0, =__bss_start
+ ldr r1, =__bss_end__
+#else
ldr r0, _bss_start_ofs
ldr r1, _bss_end_ofs
mov r4, r6 /* reloc addr */
add r0, r0, r4
add r1, r1, r4
+#endif
mov r2, #0x00000000 /* clear */
clbss_l:str r2, [r0] /* clear loop... */
add r0, r0, #4
cmp r0, r1
bne clbss_l
-#endif /* #ifndef CONFIG_SPL_BUILD */
/*
* We are done. Do not return, instead branch to second part of board
@@ -276,12 +305,6 @@
_board_init_r_ofs:
.word board_init_r - _start
-_rel_dyn_start_ofs:
- .word __rel_dyn_start - _start
-_rel_dyn_end_ofs:
- .word __rel_dyn_end - _start
-_dynsym_start_ofs:
- .word __dynsym_start - _start
#ifndef CONFIG_SKIP_LOWLEVEL_INIT
/*************************************************************************
@@ -329,6 +352,8 @@
mov lr, ip @ restore link
mov pc, lr @ back to my caller
#endif
+
+#ifndef CONFIG_SPL_BUILD
/*
*************************************************************************
*
@@ -516,4 +541,5 @@
bad_save_user_regs
bl do_fiq
-#endif
+#endif /* CONFIG_USE_IRQ */
+#endif /* CONFIG_SPL_BUILD */
diff --git a/arch/arm/cpu/armv7/u-boot.lds b/arch/arm/cpu/armv7/u-boot.lds
index dbae54d..40ecf78 100644
--- a/arch/arm/cpu/armv7/u-boot.lds
+++ b/arch/arm/cpu/armv7/u-boot.lds
@@ -55,6 +55,8 @@
. = ALIGN(4);
+ __image_copy_end = .;
+
.rel.dyn : {
__rel_dyn_start = .;
*(.rel*)
diff --git a/arch/arm/include/asm/arch-armada100/mfp.h b/arch/arm/include/asm/arch-armada100/mfp.h
index 73783a7..d6e0494 100644
--- a/arch/arm/include/asm/arch-armada100/mfp.h
+++ b/arch/arm/include/asm/arch-armada100/mfp.h
@@ -57,8 +57,8 @@
#define MFP89_UART2_TXD (MFP_REG(0x0164) | MFP_AF2 | MFP_DRIVE_MEDIUM)
/* UART3 */
-#define MFPO8_UART3_RXD (MFP_REG(0x06c) | MFP_AF2 | MFP_DRIVE_MEDIUM)
-#define MFPO9_UART3_TXD (MFP_REG(0x070) | MFP_AF2 | MFP_DRIVE_MEDIUM)
+#define MFPO8_UART3_TXD (MFP_REG(0x06c) | MFP_AF2 | MFP_DRIVE_MEDIUM)
+#define MFPO9_UART3_RXD (MFP_REG(0x070) | MFP_AF2 | MFP_DRIVE_MEDIUM)
/* I2c */
#define MFP105_CI2C_SDA (MFP_REG(0x1a4) | MFP_AF1 | MFP_DRIVE_MEDIUM)
diff --git a/arch/arm/include/asm/arch-at91/at91_spi.h b/arch/arm/include/asm/arch-at91/at91_spi.h
index c520e89..afe724d 100644
--- a/arch/arm/include/asm/arch-at91/at91_spi.h
+++ b/arch/arm/include/asm/arch-at91/at91_spi.h
@@ -33,7 +33,7 @@
at91_pdc_t pdc;
} at91_spi_t;
-#ifdef CONFIG_AT91_LEGACY
+#ifdef CONFIG_ATMEL_LEGACY
#define AT91_SPI_CR 0x00 /* Control Register */
#define AT91_SPI_SPIEN (1 << 0) /* SPI Enable */
diff --git a/arch/arm/include/asm/arch-at91/at91sam9261.h b/arch/arm/include/asm/arch-at91/at91sam9261.h
index c85fd29..59b1864 100644
--- a/arch/arm/include/asm/arch-at91/at91sam9261.h
+++ b/arch/arm/include/asm/arch-at91/at91sam9261.h
@@ -104,7 +104,7 @@
#define ATMEL_SIZE_SRAM 0x00028000 /* Internal SRAM size (160Kb) */
#define ATMEL_BASE_ROM 0x00400000 /* Internal ROM base address */
-#define ATMEL_SIZE_ROM SZ_32K /* Internal ROM size (32Kb) */
+#define ATMEL_SIZE_ROM 0x00008000 /* Internal ROM size (32Kb) */
#define ATMEL_BASE_UHP 0x00500000 /* USB Host controller */
#define ATMEL_BASE_LCDC 0x00600000 /* LDC controller */
@@ -125,6 +125,7 @@
* Other misc defines
*/
#define ATMEL_PIO_PORTS 3 /* theese SoCs have 3 PIO */
+#define ATMEL_PMC_UHP AT91SAM926x_PMC_UHP
#define ATMEL_BASE_PIO ATMEL_BASE_PIOA
/*
diff --git a/arch/arm/include/asm/arch-at91/at91sam9261_matrix.h b/arch/arm/include/asm/arch-at91/at91sam9261_matrix.h
index e2bfc4b..913b4d7 100644
--- a/arch/arm/include/asm/arch-at91/at91sam9261_matrix.h
+++ b/arch/arm/include/asm/arch-at91/at91sam9261_matrix.h
@@ -15,50 +15,45 @@
#ifndef AT91SAM9261_MATRIX_H
#define AT91SAM9261_MATRIX_H
-#define AT91_MATRIX_MCFG (AT91_MATRIX + 0x00) /* Master Configuration Register */
-#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
-#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
+#ifndef __ASSEMBLY__
-#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x04) /* Slave Configuration Register 0 */
-#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x08) /* Slave Configuration Register 1 */
-#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x0C) /* Slave Configuration Register 2 */
-#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x10) /* Slave Configuration Register 3 */
-#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x14) /* Slave Configuration Register 4 */
-#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */
-#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */
-#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
-#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
-#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
-#define AT91_MATRIX_FIXED_DEFMSTR (7 << 18) /* Fixed Index of Default Master */
+struct at91_matrix {
+ u32 mcfg; /* Master Configuration Registers */
+ u32 scfg[5]; /* Slave Configuration Registers */
+ u32 filler[6];
+ u32 ebicsa; /* EBI Chip Select Assignment Register */
+};
+#endif /* __ASSEMBLY__ */
-#define AT91_MATRIX_TCR (AT91_MATRIX + 0x24) /* TCM Configuration Register */
-#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */
-#define AT91_MATRIX_ITCM_0 (0 << 0)
-#define AT91_MATRIX_ITCM_16 (5 << 0)
-#define AT91_MATRIX_ITCM_32 (6 << 0)
-#define AT91_MATRIX_ITCM_64 (7 << 0)
-#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */
-#define AT91_MATRIX_DTCM_0 (0 << 4)
-#define AT91_MATRIX_DTCM_16 (5 << 4)
-#define AT91_MATRIX_DTCM_32 (6 << 4)
-#define AT91_MATRIX_DTCM_64 (7 << 4)
+#define AT91_MATRIX_ULBT_INFINITE (0 << 0)
+#define AT91_MATRIX_ULBT_SINGLE (1 << 0)
+#define AT91_MATRIX_ULBT_FOUR (2 << 0)
+#define AT91_MATRIX_ULBT_EIGHT (3 << 0)
+#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0)
-#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x30) /* EBI Chip Select Assignment Register */
-#define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */
-#define AT91_MATRIX_CS1A_SMC (0 << 1)
-#define AT91_MATRIX_CS1A_SDRAMC (1 << 1)
-#define AT91_MATRIX_CS3A (1 << 3) /* Chip Select 3 Assignment */
-#define AT91_MATRIX_CS3A_SMC (0 << 3)
-#define AT91_MATRIX_CS3A_SMC_SMARTMEDIA (1 << 3)
-#define AT91_MATRIX_CS4A (1 << 4) /* Chip Select 4 Assignment */
-#define AT91_MATRIX_CS4A_SMC (0 << 4)
-#define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4)
-#define AT91_MATRIX_CS5A (1 << 5) /* Chip Select 5 Assignment */
-#define AT91_MATRIX_CS5A_SMC (0 << 5)
-#define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5)
-#define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
+#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
+#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
+#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
+#define AT91_MATRIX_FIXED_DEFMSTR_SHIFT 18
+#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24)
+#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24)
-#define AT91_MATRIX_USBPUCR (AT91_MATRIX + 0x34) /* USB Pad Pull-Up Control Register */
-#define AT91_MATRIX_USBPUCR_PUON (1 << 30) /* USB Device PAD Pull-up Enable */
+#define AT91_MATRIX_M0PR_SHIFT 0
+#define AT91_MATRIX_M1PR_SHIFT 4
+#define AT91_MATRIX_M2PR_SHIFT 8
+#define AT91_MATRIX_M3PR_SHIFT 12
+#define AT91_MATRIX_M4PR_SHIFT 16
+#define AT91_MATRIX_M5PR_SHIFT 20
+
+#define AT91_MATRIX_RCB0 (1 << 0)
+#define AT91_MATRIX_RCB1 (1 << 1)
+
+#define AT91_MATRIX_CS1A_SDRAMC (1 << 1)
+#define AT91_MATRIX_CS3A_SMC_SMARTMEDIA (1 << 3)
+#define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4)
+#define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5)
+#define AT91_MATRIX_DBPUC (1 << 8)
+#define AT91_MATRIX_VDDIOMSEL_1_8V (0 << 16)
+#define AT91_MATRIX_VDDIOMSEL_3_3V (1 << 16)
#endif
diff --git a/arch/arm/include/asm/arch-at91/at91sam9263.h b/arch/arm/include/asm/arch-at91/at91sam9263.h
index 2a1d6ee..bf9ff76 100644
--- a/arch/arm/include/asm/arch-at91/at91sam9263.h
+++ b/arch/arm/include/asm/arch-at91/at91sam9263.h
@@ -125,10 +125,23 @@
#define ATMEL_BASE_UHP 0x00a00000 /* USB Host controller */
/*
+ * External memory
+ */
+#define ATMEL_BASE_CS0 0x10000000 /* typically NOR */
+#define ATMEL_BASE_CS1 0x20000000 /* SDRAM */
+#define ATMEL_BASE_CS2 0x30000000
+#define ATMEL_BASE_CS3 0x40000000 /* typically NAND */
+#define ATMEL_BASE_CS4 0x50000000
+#define ATMEL_BASE_CS5 0x60000000
+#define ATMEL_BASE_CS6 0x70000000
+#define ATMEL_BASE_CS7 0x80000000
+
+/*
* Other misc defines
*/
#define ATMEL_PIO_PORTS 5 /* this SoCs has 5 PIO */
#define ATMEL_BASE_PIO ATMEL_BASE_PIOA
+#define ATMEL_PMC_UHP AT91SAM926x_PMC_UHP
/*
* Cpu Name
diff --git a/arch/arm/include/asm/arch-at91/at91sam9263_matrix.h b/arch/arm/include/asm/arch-at91/at91sam9263_matrix.h
index 83aaaab..3f67093 100644
--- a/arch/arm/include/asm/arch-at91/at91sam9263_matrix.h
+++ b/arch/arm/include/asm/arch-at91/at91sam9263_matrix.h
@@ -15,115 +15,53 @@
#ifndef AT91SAM9263_MATRIX_H
#define AT91SAM9263_MATRIX_H
-#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */
-#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */
-#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */
-#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */
-#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */
-#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */
-#define AT91_MATRIX_MCFG6 (AT91_MATRIX + 0x18) /* Master Configuration Register 6 */
-#define AT91_MATRIX_MCFG7 (AT91_MATRIX + 0x1C) /* Master Configuration Register 7 */
-#define AT91_MATRIX_MCFG8 (AT91_MATRIX + 0x20) /* Master Configuration Register 8 */
-#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */
-#define AT91_MATRIX_ULBT_INFINITE (0 << 0)
-#define AT91_MATRIX_ULBT_SINGLE (1 << 0)
-#define AT91_MATRIX_ULBT_FOUR (2 << 0)
-#define AT91_MATRIX_ULBT_EIGHT (3 << 0)
-#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0)
+#ifndef __ASSEMBLY__
-#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */
-#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */
-#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */
-#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */
-#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */
-#define AT91_MATRIX_SCFG5 (AT91_MATRIX + 0x54) /* Slave Configuration Register 5 */
-#define AT91_MATRIX_SCFG6 (AT91_MATRIX + 0x58) /* Slave Configuration Register 6 */
-#define AT91_MATRIX_SCFG7 (AT91_MATRIX + 0x5C) /* Slave Configuration Register 7 */
-#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */
-#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */
-#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
-#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
-#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
-#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */
-#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */
-#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24)
-#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24)
+/*
+ * This struct defines access to the matrix' maximum of
+ * 16 masters and 16 slaves.
+ * Note: not all masters/slaves are available
+ */
+struct at91_matrix {
+ u32 mcfg[16]; /* Master Configuration Registers */
+ u32 scfg[16]; /* Slave Configuration Registers */
+ u32 pras[16][2]; /* Priority Assignment Slave Registers */
+ u32 mrcr; /* Master Remap Control Register */
+ u32 filler[0x06];
+ u32 ebicsa; /* EBI Chip Select Assignment Register */
+};
-#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */
-#define AT91_MATRIX_PRBS0 (AT91_MATRIX + 0x84) /* Priority Register B for Slave 0 */
-#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */
-#define AT91_MATRIX_PRBS1 (AT91_MATRIX + 0x8C) /* Priority Register B for Slave 1 */
-#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */
-#define AT91_MATRIX_PRBS2 (AT91_MATRIX + 0x94) /* Priority Register B for Slave 2 */
-#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */
-#define AT91_MATRIX_PRBS3 (AT91_MATRIX + 0x9C) /* Priority Register B for Slave 3 */
-#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */
-#define AT91_MATRIX_PRBS4 (AT91_MATRIX + 0xA4) /* Priority Register B for Slave 4 */
-#define AT91_MATRIX_PRAS5 (AT91_MATRIX + 0xA8) /* Priority Register A for Slave 5 */
-#define AT91_MATRIX_PRBS5 (AT91_MATRIX + 0xAC) /* Priority Register B for Slave 5 */
-#define AT91_MATRIX_PRAS6 (AT91_MATRIX + 0xB0) /* Priority Register A for Slave 6 */
-#define AT91_MATRIX_PRBS6 (AT91_MATRIX + 0xB4) /* Priority Register B for Slave 6 */
-#define AT91_MATRIX_PRAS7 (AT91_MATRIX + 0xB8) /* Priority Register A for Slave 7 */
-#define AT91_MATRIX_PRBS7 (AT91_MATRIX + 0xBC) /* Priority Register B for Slave 7 */
-#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */
-#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */
-#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */
-#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */
-#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */
-#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */
-#define AT91_MATRIX_M6PR (3 << 24) /* Master 6 Priority */
-#define AT91_MATRIX_M7PR (3 << 28) /* Master 7 Priority */
-#define AT91_MATRIX_M8PR (3 << 0) /* Master 8 Priority (in Register B) */
+#endif /* __ASSEMBLY__ */
-#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */
-#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
-#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
-#define AT91_MATRIX_RCB2 (1 << 2)
-#define AT91_MATRIX_RCB3 (1 << 3)
-#define AT91_MATRIX_RCB4 (1 << 4)
-#define AT91_MATRIX_RCB5 (1 << 5)
-#define AT91_MATRIX_RCB6 (1 << 6)
-#define AT91_MATRIX_RCB7 (1 << 7)
-#define AT91_MATRIX_RCB8 (1 << 8)
+#define AT91_MATRIX_ULBT_INFINITE (0 << 0)
+#define AT91_MATRIX_ULBT_SINGLE (1 << 0)
+#define AT91_MATRIX_ULBT_FOUR (2 << 0)
+#define AT91_MATRIX_ULBT_EIGHT (3 << 0)
+#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0)
-#define AT91_MATRIX_TCMR (AT91_MATRIX + 0x114) /* TCM Configuration Register */
-#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */
-#define AT91_MATRIX_ITCM_0 (0 << 0)
-#define AT91_MATRIX_ITCM_16 (5 << 0)
-#define AT91_MATRIX_ITCM_32 (6 << 0)
-#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */
-#define AT91_MATRIX_DTCM_0 (0 << 4)
-#define AT91_MATRIX_DTCM_16 (5 << 4)
-#define AT91_MATRIX_DTCM_32 (6 << 4)
+#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
+#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
+#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
+#define AT91_MATRIX_FIXED_DEFMSTR_SHIFT 18
+#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24)
+#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24)
-#define AT91_MATRIX_EBI0CSA (AT91_MATRIX + 0x120) /* EBI0 Chip Select Assignment Register */
-#define AT91_MATRIX_EBI0_CS1A (1 << 1) /* Chip Select 1 Assignment */
-#define AT91_MATRIX_EBI0_CS1A_SMC (0 << 1)
-#define AT91_MATRIX_EBI0_CS1A_SDRAMC (1 << 1)
-#define AT91_MATRIX_EBI0_CS3A (1 << 3) /* Chip Select 3 Assignment */
-#define AT91_MATRIX_EBI0_CS3A_SMC (0 << 3)
-#define AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA (1 << 3)
-#define AT91_MATRIX_EBI0_CS4A (1 << 4) /* Chip Select 4 Assignment */
-#define AT91_MATRIX_EBI0_CS4A_SMC (0 << 4)
-#define AT91_MATRIX_EBI0_CS4A_SMC_CF1 (1 << 4)
-#define AT91_MATRIX_EBI0_CS5A (1 << 5) /* Chip Select 5 Assignment */
-#define AT91_MATRIX_EBI0_CS5A_SMC (0 << 5)
-#define AT91_MATRIX_EBI0_CS5A_SMC_CF2 (1 << 5)
-#define AT91_MATRIX_EBI0_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
-#define AT91_MATRIX_EBI0_VDDIOMSEL (1 << 16) /* Memory voltage selection */
-#define AT91_MATRIX_EBI0_VDDIOMSEL_1_8V (0 << 16)
-#define AT91_MATRIX_EBI0_VDDIOMSEL_3_3V (1 << 16)
+#define AT91_MATRIX_M0PR_SHIFT 0
+#define AT91_MATRIX_M1PR_SHIFT 4
+#define AT91_MATRIX_M2PR_SHIFT 8
+#define AT91_MATRIX_M3PR_SHIFT 12
+#define AT91_MATRIX_M4PR_SHIFT 16
+#define AT91_MATRIX_M5PR_SHIFT 20
-#define AT91_MATRIX_EBI1CSA (AT91_MATRIX + 0x124) /* EBI1 Chip Select Assignment Register */
-#define AT91_MATRIX_EBI1_CS1A (1 << 1) /* Chip Select 1 Assignment */
-#define AT91_MATRIX_EBI1_CS1A_SMC (0 << 1)
-#define AT91_MATRIX_EBI1_CS1A_SDRAMC (1 << 1)
-#define AT91_MATRIX_EBI1_CS2A (1 << 3) /* Chip Select 3 Assignment */
-#define AT91_MATRIX_EBI1_CS2A_SMC (0 << 3)
-#define AT91_MATRIX_EBI1_CS2A_SMC_SMARTMEDIA (1 << 3)
-#define AT91_MATRIX_EBI1_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
-#define AT91_MATRIX_EBI1_VDDIOMSEL (1 << 16) /* Memory voltage selection */
-#define AT91_MATRIX_EBI1_VDDIOMSEL_1_8V (0 << 16)
-#define AT91_MATRIX_EBI1_VDDIOMSEL_3_3V (1 << 16)
+#define AT91_MATRIX_RCB0 (1 << 0)
+#define AT91_MATRIX_RCB1 (1 << 1)
+
+#define AT91_MATRIX_CS1A_SDRAMC (1 << 1)
+#define AT91_MATRIX_CS3A_SMC_SMARTMEDIA (1 << 3)
+#define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4)
+#define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5)
+#define AT91_MATRIX_DBPUC (1 << 8)
+#define AT91_MATRIX_VDDIOMSEL_1_8V (0 << 16)
+#define AT91_MATRIX_VDDIOMSEL_3_3V (1 << 16)
#endif
diff --git a/arch/arm/include/asm/arch-at91/at91sam9rl.h b/arch/arm/include/asm/arch-at91/at91sam9rl.h
index 8eb0d4f..00b6aa4 100644
--- a/arch/arm/include/asm/arch-at91/at91sam9rl.h
+++ b/arch/arm/include/asm/arch-at91/at91sam9rl.h
@@ -15,116 +15,117 @@
#define AT91SAM9RL_H
/*
+ * defines to be used in other places
+ */
+#define CONFIG_ARM926EJS /* ARM926EJS Core */
+#define CONFIG_AT91FAMILY /* it's a member of AT91 */
+
+/*
* Peripheral identifiers/interrupts.
*/
-#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */
-#define AT91_ID_SYS 1 /* System Controller */
-#define AT91SAM9RL_ID_PIOA 2 /* Parallel IO Controller A */
-#define AT91SAM9RL_ID_PIOB 3 /* Parallel IO Controller B */
-#define AT91SAM9RL_ID_PIOC 4 /* Parallel IO Controller C */
-#define AT91SAM9RL_ID_PIOD 5 /* Parallel IO Controller D */
-#define AT91SAM9RL_ID_US0 6 /* USART 0 */
-#define AT91SAM9RL_ID_US1 7 /* USART 1 */
-#define AT91SAM9RL_ID_US2 8 /* USART 2 */
-#define AT91SAM9RL_ID_US3 9 /* USART 3 */
-#define AT91SAM9RL_ID_MCI 10 /* Multimedia Card Interface */
-#define AT91SAM9RL_ID_TWI0 11 /* TWI 0 */
-#define AT91SAM9RL_ID_TWI1 12 /* TWI 1 */
-#define AT91SAM9RL_ID_SPI 13 /* Serial Peripheral Interface */
-#define AT91SAM9RL_ID_SSC0 14 /* Serial Synchronous Controller 0 */
-#define AT91SAM9RL_ID_SSC1 15 /* Serial Synchronous Controller 1 */
-#define AT91SAM9RL_ID_TC0 16 /* Timer Counter 0 */
-#define AT91SAM9RL_ID_TC1 17 /* Timer Counter 1 */
-#define AT91SAM9RL_ID_TC2 18 /* Timer Counter 2 */
-#define AT91SAM9RL_ID_PWMC 19 /* Pulse Width Modulation Controller */
-#define AT91SAM9RL_ID_TSC 20 /* Touch Screen Controller */
-#define AT91SAM9RL_ID_DMA 21 /* DMA Controller */
-#define AT91SAM9RL_ID_UDPHS 22 /* USB Device HS */
-#define AT91SAM9RL_ID_LCDC 23 /* LCD Controller */
-#define AT91SAM9RL_ID_AC97C 24 /* AC97 Controller */
-#define AT91SAM9RL_ID_IRQ0 31 /* Advanced Interrupt Controller (IRQ0) */
-
-#define AT91_SDRAMC_BASE 0xffffea00
-#define AT91_SMC_BASE 0xffffec00
-#define AT91_MATRIX_BASE 0xffffee00
-#define AT91_PIO_BASE 0xfffff400
-#define AT91_PMC_BASE 0xfffffc00
-#define AT91_RSTC_BASE 0xfffffd00
-#define AT91_PIT_BASE 0xfffffd30
-#define AT91_WDT_BASE 0xfffffd40
-
-#ifdef CONFIG_AT91_LEGACY
+#define ATMEL_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */
+#define ATMEL_ID_SYS 1 /* System Peripherals */
+#define ATMEL_ID_PIOA 2 /* Parallel IO Controller A */
+#define ATMEL_ID_PIOB 3 /* Parallel IO Controller B */
+#define ATMEL_ID_PIOC 4 /* Parallel IO Controller C */
+#define ATMEL_ID_PIOD 5 /* Parallel IO Controller D */
+#define ATMEL_ID_USART0 6 /* USART 0 */
+#define ATMEL_ID_USART1 7 /* USART 1 */
+#define ATMEL_ID_USART2 8 /* USART 2 */
+#define ATMEL_ID_USART3 9 /* USART 3 */
+#define ATMEL_ID_MCI 10 /* Multimedia Card Interface */
+#define ATMEL_ID_TWI0 11 /* TWI 0 */
+#define ATMEL_ID_TWI1 12 /* TWI 1 */
+#define ATMEL_ID_SPI 13 /* Serial Peripheral Interface */
+#define ATMEL_ID_SSC0 14 /* Serial Synchronous Controller 0 */
+#define ATMEL_ID_SSC1 15 /* Serial Synchronous Controller 1 */
+#define ATMEL_ID_TC0 16 /* Timer Counter 0 */
+#define ATMEL_ID_TC1 17 /* Timer Counter 1 */
+#define ATMEL_ID_TC2 18 /* Timer Counter 2 */
+#define ATMEL_ID_PWMC 19 /* Pulse Width Modulation Controller */
+#define ATMEL_ID_TSC 20 /* Touch Screen Controller */
+#define ATMEL_ID_DMA 21 /* DMA Controller */
+#define ATMEL_ID_UDPHS 22 /* USB Device HS */
+#define ATMEL_ID_LCDC 23 /* LCD Controller */
+#define ATMEL_ID_AC97C 24 /* AC97 Controller */
+#define ATMEL_ID_IRQ0 31 /* Advanced Interrupt Controller (IRQ0) */
/*
* User Peripheral physical base addresses.
*/
-#define AT91SAM9RL_BASE_TCB0 0xfffa0000
-#define AT91SAM9RL_BASE_TC0 0xfffa0000
-#define AT91SAM9RL_BASE_TC1 0xfffa0040
-#define AT91SAM9RL_BASE_TC2 0xfffa0080
-#define AT91SAM9RL_BASE_MCI 0xfffa4000
-#define AT91SAM9RL_BASE_TWI0 0xfffa8000
-#define AT91SAM9RL_BASE_TWI1 0xfffac000
-#define AT91SAM9RL_BASE_US0 0xfffb0000
-#define AT91SAM9RL_BASE_US1 0xfffb4000
-#define AT91SAM9RL_BASE_US2 0xfffb8000
-#define AT91SAM9RL_BASE_US3 0xfffbc000
-#define AT91SAM9RL_BASE_SSC0 0xfffc0000
-#define AT91SAM9RL_BASE_SSC1 0xfffc4000
-#define AT91SAM9RL_BASE_PWMC 0xfffc8000
-#define AT91SAM9RL_BASE_SPI 0xfffcc000
-#define AT91SAM9RL_BASE_TSC 0xfffd0000
-#define AT91SAM9RL_BASE_UDPHS 0xfffd4000
-#define AT91SAM9RL_BASE_AC97C 0xfffd8000
-#define AT91_BASE_SYS 0xffffc000
+#define ATMEL_BASE_TCB0 0xfffa0000
+#define ATMEL_BASE_TC0 0xfffa0000
+#define ATMEL_BASE_TC1 0xfffa0040
+#define ATMEL_BASE_TC2 0xfffa0080
+#define ATMEL_BASE_MCI 0xfffa4000
+#define ATMEL_BASE_TWI0 0xfffa8000
+#define ATMEL_BASE_TWI1 0xfffac000
+#define ATMEL_BASE_USART0 0xfffb0000
+#define ATMEL_BASE_USART1 0xfffb4000
+#define ATMEL_BASE_USART2 0xfffb8000
+#define ATMEL_BASE_USART3 0xfffbc000
+#define ATMEL_BASE_SSC0 0xfffc0000
+#define ATMEL_BASE_SSC1 0xfffc4000
+#define ATMEL_BASE_PWMC 0xfffc8000
+#define ATMEL_BASE_SPI0 0xfffcc000
+#define ATMEL_BASE_TSC 0xfffd0000
+#define ATMEL_BASE_UDPHS 0xfffd4000
+#define ATMEL_BASE_AC97C 0xfffd8000
+#define ATMEL_BASE_SYS 0xffffc000
/*
- * System Peripherals (offset from AT91_BASE_SYS)
+ * System Peripherals
*/
-#define AT91_DMA (0xffffe600 - AT91_BASE_SYS)
-#define AT91_ECC (0xffffe800 - AT91_BASE_SYS)
-#define AT91_SDRAMC (0xffffea00 - AT91_BASE_SYS)
-#define AT91_SMC (0xffffec00 - AT91_BASE_SYS)
-#define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS)
-#define AT91_CCFG (0xffffef10 - AT91_BASE_SYS)
-#define AT91_AIC (0xfffff000 - AT91_BASE_SYS)
-#define AT91_DBGU (0xfffff200 - AT91_BASE_SYS)
-#define AT91_PIOA (0xfffff400 - AT91_BASE_SYS)
-#define AT91_PIOB (0xfffff600 - AT91_BASE_SYS)
-#define AT91_PIOC (0xfffff800 - AT91_BASE_SYS)
-#define AT91_PIOD (0xfffffa00 - AT91_BASE_SYS)
-#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS)
-#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS)
-#define AT91_SHDWC (0xfffffd10 - AT91_BASE_SYS)
-#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS)
-#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS)
-#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS)
-#define AT91_SCKCR (0xfffffd50 - AT91_BASE_SYS)
-#define AT91_GPBR (0xfffffd60 - AT91_BASE_SYS)
-#define AT91_RTC (0xfffffe00 - AT91_BASE_SYS)
-
-#define AT91_USART0 AT91SAM9RL_BASE_US0
-#define AT91_USART1 AT91SAM9RL_BASE_US1
-#define AT91_USART2 AT91SAM9RL_BASE_US2
-#define AT91_USART3 AT91SAM9RL_BASE_US3
-
-#endif /* CONFIG_AT91_LEGACY */
+#define ATMEL_BASE_DMA 0xffffe600
+#define ATMEL_BASE_ECC 0xffffe800
+#define ATMEL_BASE_SDRAMC 0xffffea00
+#define ATMEL_BASE_SMC 0xffffec00
+#define ATMEL_BASE_MATRIX 0xffffee00
+#define ATMEL_BASE_CCFG 0xffffef10
+#define ATMEL_BASE_AIC 0xfffff000
+#define ATMEL_BASE_DBGU 0xfffff200
+#define ATMEL_BASE_PIOA 0xfffff400
+#define ATMEL_BASE_PIOB 0xfffff600
+#define ATMEL_BASE_PIOC 0xfffff800
+#define ATMEL_BASE_PIOD 0xfffffa00
+#define ATMEL_BASE_PMC 0xfffffc00
+#define ATMEL_BASE_RSTC 0xfffffd00
+#define ATMEL_BASE_SHDWC 0xfffffd10
+#define ATMEL_BASE_RTT 0xfffffd20
+#define ATMEL_BASE_PIT 0xfffffd30
+#define ATMEL_BASE_WDT 0xfffffd40
+#define ATMEL_BASE_SCKCR 0xfffffd50
+#define ATMEL_BASE_GPBR 0xfffffd60
+#define ATMEL_BASE_RTC 0xfffffe00
/*
* Internal Memory.
*/
-#define AT91SAM9RL_SRAM_BASE 0x00300000 /* Internal SRAM base address */
-#define AT91SAM9RL_SRAM_SIZE SZ_16K /* Internal SRAM size (16Kb) */
+#define ATMEL_BASE_SRAM 0x00300000 /* Internal SRAM base address */
+#define ATMEL_BASE_ROM 0x00400000 /* Internal ROM base address */
-#define AT91SAM9RL_ROM_BASE 0x00400000 /* Internal ROM base address */
-#define AT91SAM9RL_ROM_SIZE (2 * SZ_16K) /* Internal ROM size (32Kb) */
+#define ATMEL_BASE_LCDC 0x00500000 /* LCD Controller */
+#define ATMEL_UHP_BASE 0x00600000 /* USB Device HS controller */
-#define AT91SAM9RL_LCDC_BASE 0x00500000 /* LCD Controller */
-#define AT91SAM9RL_UDPHS_BASE 0x00600000 /* USB Device HS controller */
+/*
+ * External memory
+ */
+#define ATMEL_BASE_CS0 0x10000000
+#define ATMEL_BASE_CS1 0x20000000 /* SDRAM */
+#define ATMEL_BASE_CS2 0x30000000
+#define ATMEL_BASE_CS3 0x40000000 /* NAND */
+#define ATMEL_BASE_CS4 0x50000000 /* Compact Flash Slot 0 */
+#define ATMEL_BASE_CS5 0x60000000 /* Compact Flash Slot 1 */
+
+/*
+ * Other misc defines
+ */
+#define ATMEL_PIO_PORTS 4 /* this SoC has 4 PIO */
+#define ATMEL_BASE_PIO ATMEL_BASE_PIOA
/*
* Cpu Name
*/
-#define CONFIG_SYS_AT91_CPU_NAME "AT91SAM9RL"
+#define ATMEL_CPU_NAME "AT91SAM9RL"
#endif
diff --git a/arch/arm/include/asm/arch-at91/at91sam9rl_matrix.h b/arch/arm/include/asm/arch-at91/at91sam9rl_matrix.h
index af8d914..295f768 100644
--- a/arch/arm/include/asm/arch-at91/at91sam9rl_matrix.h
+++ b/arch/arm/include/asm/arch-at91/at91sam9rl_matrix.h
@@ -14,83 +14,48 @@
#ifndef AT91SAM9RL_MATRIX_H
#define AT91SAM9RL_MATRIX_H
-#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */
-#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */
-#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */
-#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */
-#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */
-#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */
-#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */
-#define AT91_MATRIX_ULBT_INFINITE (0 << 0)
-#define AT91_MATRIX_ULBT_SINGLE (1 << 0)
-#define AT91_MATRIX_ULBT_FOUR (2 << 0)
-#define AT91_MATRIX_ULBT_EIGHT (3 << 0)
-#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0)
+#ifndef __ASSEMBLY__
-#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */
-#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */
-#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */
-#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */
-#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */
-#define AT91_MATRIX_SCFG5 (AT91_MATRIX + 0x54) /* Slave Configuration Register 5 */
-#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */
-#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */
-#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
-#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
-#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
-#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */
-#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */
-#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24)
-#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24)
+struct at91_matrix {
+ u32 mcfg[16]; /* Master Configuration Registers */
+ u32 scfg[16]; /* Slave Configuration Registers */
+ u32 pras[16][2]; /* Priority Assignment Slave Registers */
+ u32 mrcr; /* Master Remap Control Register */
+ u32 filler[7];
+ u32 ebicsa; /* EBI Chip Select Assignment Register */
+};
-#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */
-#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */
-#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */
-#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */
-#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */
-#define AT91_MATRIX_PRAS5 (AT91_MATRIX + 0xA8) /* Priority Register A for Slave 5 */
-#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */
-#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */
-#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */
-#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */
-#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */
-#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */
+#endif /* __ASSEMBLY__ */
-#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */
-#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
-#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
-#define AT91_MATRIX_RCB2 (1 << 2)
-#define AT91_MATRIX_RCB3 (1 << 3)
-#define AT91_MATRIX_RCB4 (1 << 4)
-#define AT91_MATRIX_RCB5 (1 << 5)
+#define AT91_MATRIX_ULBT_INFINITE (0 << 0)
+#define AT91_MATRIX_ULBT_SINGLE (1 << 0)
+#define AT91_MATRIX_ULBT_FOUR (2 << 0)
+#define AT91_MATRIX_ULBT_EIGHT (3 << 0)
+#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0)
-#define AT91_MATRIX_TCMR (AT91_MATRIX + 0x114) /* TCM Configuration Register */
-#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */
-#define AT91_MATRIX_ITCM_0 (0 << 0)
-#define AT91_MATRIX_ITCM_16 (5 << 0)
-#define AT91_MATRIX_ITCM_32 (6 << 0)
-#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */
-#define AT91_MATRIX_DTCM_0 (0 << 4)
-#define AT91_MATRIX_DTCM_16 (5 << 4)
-#define AT91_MATRIX_DTCM_32 (6 << 4)
+#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
+#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
+#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
+#define AT91_MATRIX_FIXED_DEFMSTR_SHIFT 18
+#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24)
+#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24)
-#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x120) /* EBI0 Chip Select Assignment Register */
-#define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */
-#define AT91_MATRIX_CS1A_SMC (0 << 1)
-#define AT91_MATRIX_CS1A_SDRAMC (1 << 1)
-#define AT91_MATRIX_CS3A (1 << 3) /* Chip Select 3 Assignment */
-#define AT91_MATRIX_CS3A_SMC (0 << 3)
-#define AT91_MATRIX_CS3A_SMC_SMARTMEDIA (1 << 3)
-#define AT91_MATRIX_CS4A (1 << 4) /* Chip Select 4 Assignment */
-#define AT91_MATRIX_CS4A_SMC (0 << 4)
-#define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4)
-#define AT91_MATRIX_CS5A (1 << 5) /* Chip Select 5 Assignment */
-#define AT91_MATRIX_CS5A_SMC (0 << 5)
-#define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5)
-#define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
-#define AT91_MATRIX_VDDIOMSEL (1 << 16) /* Memory voltage selection */
-#define AT91_MATRIX_VDDIOMSEL_1_8V (0 << 16)
-#define AT91_MATRIX_VDDIOMSEL_3_3V (1 << 16)
+#define AT91_MATRIX_M0PR_SHIFT 0
+#define AT91_MATRIX_M1PR_SHIFT 4
+#define AT91_MATRIX_M2PR_SHIFT 8
+#define AT91_MATRIX_M3PR_SHIFT 12
+#define AT91_MATRIX_M4PR_SHIFT 16
+#define AT91_MATRIX_M5PR_SHIFT 20
+#define AT91_MATRIX_RCB0 (1 << 0)
+#define AT91_MATRIX_RCB1 (1 << 1)
+
+#define AT91_MATRIX_CS1A_SDRAMC (1 << 1)
+#define AT91_MATRIX_CS3A_SMC_SMARTMEDIA (1 << 3)
+#define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4)
+#define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5)
+#define AT91_MATRIX_DBPUC (1 << 8)
+#define AT91_MATRIX_VDDIOMSEL_1_8V (0 << 16)
+#define AT91_MATRIX_VDDIOMSEL_3_3V (1 << 16)
#endif
diff --git a/arch/arm/include/asm/arch-at91rm9200/AT91RM9200.h b/arch/arm/include/asm/arch-at91rm9200/AT91RM9200.h
deleted file mode 100644
index 00bae1c..0000000
--- a/arch/arm/include/asm/arch-at91rm9200/AT91RM9200.h
+++ /dev/null
@@ -1,812 +0,0 @@
-/*
- * (C) Copyright 2003
- * AT91RM9200 definitions
- * Author : ATMEL AT91 application group
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef AT91RM9200_H
-#define AT91RM9200_H
-
-#ifndef __ASSEMBLY__
-typedef volatile unsigned int AT91_REG; /* Hardware register definition */
-
-/*****************************************************************************/
-/* SOFTWARE API DEFINITION FOR Timer Counter Channel Interface */
-/*****************************************************************************/
-typedef struct _AT91S_TC
-{
- AT91_REG TC_CCR; /* Channel Control Register */
- AT91_REG TC_CMR; /* Channel Mode Register */
- AT91_REG Reserved0[2]; /* */
- AT91_REG TC_CV; /* Counter Value */
- AT91_REG TC_RA; /* Register A */
- AT91_REG TC_RB; /* Register B */
- AT91_REG TC_RC; /* Register C */
- AT91_REG TC_SR; /* Status Register */
- AT91_REG TC_IER; /* Interrupt Enable Register */
- AT91_REG TC_IDR; /* Interrupt Disable Register */
- AT91_REG TC_IMR; /* Interrupt Mask Register */
-} AT91S_TC, *AT91PS_TC;
-
-#define AT91C_TC_TIMER_DIV1_CLOCK ((unsigned int) 0x0 << 0) /* (TC) MCK/2 */
-#define AT91C_TC_TIMER_DIV2_CLOCK ((unsigned int) 0x1 << 0) /* (TC) MCK/8 */
-#define AT91C_TC_TIMER_DIV3_CLOCK ((unsigned int) 0x2 << 0) /* (TC) MCK/32 */
-#define AT91C_TC_TIMER_DIV4_CLOCK ((unsigned int) 0x3 << 0) /* (TC) MCK/128 */
-#define AT91C_TC_SLOW_CLOCK ((unsigned int) 0x4 << 0) /* (TC) SLOW CLK*/
-#define AT91C_TC_XC0_CLOCK ((unsigned int) 0x5 << 0) /* (TC) XC0 */
-#define AT91C_TC_XC1_CLOCK ((unsigned int) 0x6 << 0) /* (TC) XC1 */
-#define AT91C_TC_XC2_CLOCK ((unsigned int) 0x7 << 0) /* (TC) XC2 */
-#define AT91C_TCB_TC0XC0S_NONE ((unsigned int) 0x1) /* (TCB) None signal connected to XC0 */
-#define AT91C_TCB_TC1XC1S_NONE ((unsigned int) 0x1 << 2) /* (TCB) None signal connected to XC1 */
-#define AT91C_TCB_TC2XC2S_NONE ((unsigned int) 0x1 << 4) /* (TCB) None signal connected to XC2 */
-#define AT91C_TC_CLKDIS ((unsigned int) 0x1 << 1) /* (TC) Counter Clock Disable Command */
-#define AT91C_TC_SWTRG ((unsigned int) 0x1 << 2) /* (TC) Software Trigger Command */
-#define AT91C_TC_CLKEN ((unsigned int) 0x1 << 0) /* (TC) Counter Clock Enable Command */
-
-/*****************************************************************************/
-/* SOFTWARE API DEFINITION FOR Usart */
-/*****************************************************************************/
-typedef struct _AT91S_USART
-{
- AT91_REG US_CR; /* Control Register */
- AT91_REG US_MR; /* Mode Register */
- AT91_REG US_IER; /* Interrupt Enable Register */
- AT91_REG US_IDR; /* Interrupt Disable Register */
- AT91_REG US_IMR; /* Interrupt Mask Register */
- AT91_REG US_CSR; /* Channel Status Register */
- AT91_REG US_RHR; /* Receiver Holding Register */
- AT91_REG US_THR; /* Transmitter Holding Register */
- AT91_REG US_BRGR; /* Baud Rate Generator Register */
- AT91_REG US_RTOR; /* Receiver Time-out Register */
- AT91_REG US_TTGR; /* Transmitter Time-guard Register */
- AT91_REG Reserved0[5]; /* */
- AT91_REG US_FIDI; /* FI_DI_Ratio Register */
- AT91_REG US_NER; /* Nb Errors Register */
- AT91_REG US_XXR; /* XON_XOFF Register */
- AT91_REG US_IF; /* IRDA_FILTER Register */
- AT91_REG Reserved1[44]; /* */
- AT91_REG US_RPR; /* Receive Pointer Register */
- AT91_REG US_RCR; /* Receive Counter Register */
- AT91_REG US_TPR; /* Transmit Pointer Register */
- AT91_REG US_TCR; /* Transmit Counter Register */
- AT91_REG US_RNPR; /* Receive Next Pointer Register */
- AT91_REG US_RNCR; /* Receive Next Counter Register */
- AT91_REG US_TNPR; /* Transmit Next Pointer Register */
- AT91_REG US_TNCR; /* Transmit Next Counter Register */
- AT91_REG US_PTCR; /* PDC Transfer Control Register */
- AT91_REG US_PTSR; /* PDC Transfer Status Register */
-} AT91S_USART, *AT91PS_USART;
-
-/*****************************************************************************/
-/* SOFTWARE API DEFINITION FOR Clock Generator Controler */
-/*****************************************************************************/
-typedef struct _AT91S_CKGR
-{
- AT91_REG CKGR_MOR; /* Main Oscillator Register */
- AT91_REG CKGR_MCFR; /* Main Clock Frequency Register */
- AT91_REG CKGR_PLLAR; /* PLL A Register */
- AT91_REG CKGR_PLLBR; /* PLL B Register */
-} AT91S_CKGR, *AT91PS_CKGR;
-
-/* -------- CKGR_MOR : (CKGR Offset: 0x0) Main Oscillator Register -------- */
-#define AT91C_CKGR_MOSCEN ((unsigned int) 0x1 << 0) /* (CKGR) Main Oscillator Enable */
-#define AT91C_CKGR_OSCTEST ((unsigned int) 0x1 << 1) /* (CKGR) Oscillator Test */
-#define AT91C_CKGR_OSCOUNT ((unsigned int) 0xFF << 8) /* (CKGR) Main Oscillator Start-up Time */
-
-/* -------- CKGR_MCFR : (CKGR Offset: 0x4) Main Clock Frequency Register -------- */
-#define AT91C_CKGR_MAINF ((unsigned int) 0xFFFF << 0) /* (CKGR) Main Clock Frequency */
-#define AT91C_CKGR_MAINRDY ((unsigned int) 0x1 << 16) /* (CKGR) Main Clock Ready */
-
-/* -------- CKGR_PLLAR : (CKGR Offset: 0x8) PLL A Register -------- */
-#define AT91C_CKGR_DIVA ((unsigned int) 0xFF << 0) /* (CKGR) Divider Selected */
-#define AT91C_CKGR_DIVA_0 ((unsigned int) 0x0) /* (CKGR) Divider output is 0 */
-#define AT91C_CKGR_DIVA_BYPASS ((unsigned int) 0x1) /* (CKGR) Divider is bypassed */
-#define AT91C_CKGR_PLLACOUNT ((unsigned int) 0x3F << 8) /* (CKGR) PLL A Counter */
-#define AT91C_CKGR_OUTA ((unsigned int) 0x3 << 14) /* (CKGR) PLL A Output Frequency Range */
-#define AT91C_CKGR_OUTA_0 ((unsigned int) 0x0 << 14) /* (CKGR) Please refer to the PLLA datasheet */
-#define AT91C_CKGR_OUTA_1 ((unsigned int) 0x1 << 14) /* (CKGR) Please refer to the PLLA datasheet */
-#define AT91C_CKGR_OUTA_2 ((unsigned int) 0x2 << 14) /* (CKGR) Please refer to the PLLA datasheet */
-#define AT91C_CKGR_OUTA_3 ((unsigned int) 0x3 << 14) /* (CKGR) Please refer to the PLLA datasheet */
-#define AT91C_CKGR_MULA ((unsigned int) 0x7FF << 16) /* (CKGR) PLL A Multiplier */
-#define AT91C_CKGR_SRCA ((unsigned int) 0x1 << 29) /* (CKGR) PLL A Source */
-
-/* -------- CKGR_PLLBR : (CKGR Offset: 0xc) PLL B Register -------- */
-#define AT91C_CKGR_DIVB ((unsigned int) 0xFF << 0) /* (CKGR) Divider Selected */
-#define AT91C_CKGR_DIVB_0 ((unsigned int) 0x0) /* (CKGR) Divider output is 0 */
-#define AT91C_CKGR_DIVB_BYPASS ((unsigned int) 0x1) /* (CKGR) Divider is bypassed */
-#define AT91C_CKGR_PLLBCOUNT ((unsigned int) 0x3F << 8) /* (CKGR) PLL B Counter */
-#define AT91C_CKGR_OUTB ((unsigned int) 0x3 << 14) /* (CKGR) PLL B Output Frequency Range */
-#define AT91C_CKGR_OUTB_0 ((unsigned int) 0x0 << 14) /* (CKGR) Please refer to the PLLB datasheet */
-#define AT91C_CKGR_OUTB_1 ((unsigned int) 0x1 << 14) /* (CKGR) Please refer to the PLLB datasheet */
-#define AT91C_CKGR_OUTB_2 ((unsigned int) 0x2 << 14) /* (CKGR) Please refer to the PLLB datasheet */
-#define AT91C_CKGR_OUTB_3 ((unsigned int) 0x3 << 14) /* (CKGR) Please refer to the PLLB datasheet */
-#define AT91C_CKGR_MULB ((unsigned int) 0x7FF << 16) /* (CKGR) PLL B Multiplier */
-#define AT91C_CKGR_USB_96M ((unsigned int) 0x1 << 28) /* (CKGR) Divider for USB Ports */
-#define AT91C_CKGR_USB_PLL ((unsigned int) 0x1 << 29) /* (CKGR) PLL Use */
-
-/*****************************************************************************/
-/* SOFTWARE API DEFINITION FOR Parallel Input Output Controler */
-/*****************************************************************************/
-typedef struct _AT91S_PIO
-{
- AT91_REG PIO_PER; /* PIO Enable Register */
- AT91_REG PIO_PDR; /* PIO Disable Register */
- AT91_REG PIO_PSR; /* PIO Status Register */
- AT91_REG Reserved0[1]; /* */
- AT91_REG PIO_OER; /* Output Enable Register */
- AT91_REG PIO_ODR; /* Output Disable Registerr */
- AT91_REG PIO_OSR; /* Output Status Register */
- AT91_REG Reserved1[1]; /* */
- AT91_REG PIO_IFER; /* Input Filter Enable Register */
- AT91_REG PIO_IFDR; /* Input Filter Disable Register */
- AT91_REG PIO_IFSR; /* Input Filter Status Register */
- AT91_REG Reserved2[1]; /* */
- AT91_REG PIO_SODR; /* Set Output Data Register */
- AT91_REG PIO_CODR; /* Clear Output Data Register */
- AT91_REG PIO_ODSR; /* Output Data Status Register */
- AT91_REG PIO_PDSR; /* Pin Data Status Register */
- AT91_REG PIO_IER; /* Interrupt Enable Register */
- AT91_REG PIO_IDR; /* Interrupt Disable Register */
- AT91_REG PIO_IMR; /* Interrupt Mask Register */
- AT91_REG PIO_ISR; /* Interrupt Status Register */
- AT91_REG PIO_MDER; /* Multi-driver Enable Register */
- AT91_REG PIO_MDDR; /* Multi-driver Disable Register */
- AT91_REG PIO_MDSR; /* Multi-driver Status Register */
- AT91_REG Reserved3[1]; /* */
- AT91_REG PIO_PPUDR; /* Pull-up Disable Register */
- AT91_REG PIO_PPUER; /* Pull-up Enable Register */
- AT91_REG PIO_PPUSR; /* Pad Pull-up Status Register */
- AT91_REG Reserved4[1]; /* */
- AT91_REG PIO_ASR; /* Select A Register */
- AT91_REG PIO_BSR; /* Select B Register */
- AT91_REG PIO_ABSR; /* AB Select Status Register */
- AT91_REG Reserved5[9]; /* */
- AT91_REG PIO_OWER; /* Output Write Enable Register */
- AT91_REG PIO_OWDR; /* Output Write Disable Register */
- AT91_REG PIO_OWSR; /* Output Write Status Register */
-} AT91S_PIO, *AT91PS_PIO;
-
-
-/*****************************************************************************/
-/* SOFTWARE API DEFINITION FOR Debug Unit */
-/*****************************************************************************/
-typedef struct _AT91S_DBGU
-{
- AT91_REG DBGU_CR; /* Control Register */
- AT91_REG DBGU_MR; /* Mode Register */
- AT91_REG DBGU_IER; /* Interrupt Enable Register */
- AT91_REG DBGU_IDR; /* Interrupt Disable Register */
- AT91_REG DBGU_IMR; /* Interrupt Mask Register */
- AT91_REG DBGU_CSR; /* Channel Status Register */
- AT91_REG DBGU_RHR; /* Receiver Holding Register */
- AT91_REG DBGU_THR; /* Transmitter Holding Register */
- AT91_REG DBGU_BRGR; /* Baud Rate Generator Register */
- AT91_REG Reserved0[7]; /* */
- AT91_REG DBGU_C1R; /* Chip ID1 Register */
- AT91_REG DBGU_C2R; /* Chip ID2 Register */
- AT91_REG DBGU_FNTR; /* Force NTRST Register */
- AT91_REG Reserved1[45]; /* */
- AT91_REG DBGU_RPR; /* Receive Pointer Register */
- AT91_REG DBGU_RCR; /* Receive Counter Register */
- AT91_REG DBGU_TPR; /* Transmit Pointer Register */
- AT91_REG DBGU_TCR; /* Transmit Counter Register */
- AT91_REG DBGU_RNPR; /* Receive Next Pointer Register */
- AT91_REG DBGU_RNCR; /* Receive Next Counter Register */
- AT91_REG DBGU_TNPR; /* Transmit Next Pointer Register */
- AT91_REG DBGU_TNCR; /* Transmit Next Counter Register */
- AT91_REG DBGU_PTCR; /* PDC Transfer Control Register */
- AT91_REG DBGU_PTSR; /* PDC Transfer Status Register */
-} AT91S_DBGU, *AT91PS_DBGU;
-
-/* -------- DBGU_IER : (DBGU Offset: 0x8) Debug Unit Interrupt Enable Register -------- */
-#define AT91C_US_RXRDY ((unsigned int) 0x1 << 0) /* (DBGU) RXRDY Interrupt */
-#define AT91C_US_TXRDY ((unsigned int) 0x1 << 1) /* (DBGU) TXRDY Interrupt */
-#define AT91C_US_ENDRX ((unsigned int) 0x1 << 3) /* (DBGU) End of Receive Transfer Interrupt */
-#define AT91C_US_ENDTX ((unsigned int) 0x1 << 4) /* (DBGU) End of Transmit Interrupt */
-#define AT91C_US_OVRE ((unsigned int) 0x1 << 5) /* (DBGU) Overrun Interrupt */
-#define AT91C_US_FRAME ((unsigned int) 0x1 << 6) /* (DBGU) Framing Error Interrupt */
-#define AT91C_US_PARE ((unsigned int) 0x1 << 7) /* (DBGU) Parity Error Interrupt */
-#define AT91C_US_TXEMPTY ((unsigned int) 0x1 << 9) /* (DBGU) TXEMPTY Interrupt */
-#define AT91C_US_TXBUFE ((unsigned int) 0x1 << 11) /* (DBGU) TXBUFE Interrupt */
-#define AT91C_US_RXBUFF ((unsigned int) 0x1 << 12) /* (DBGU) RXBUFF Interrupt */
-#define AT91C_US_COMM_TX ((unsigned int) 0x1 << 30) /* (DBGU) COMM_TX Interrupt */
-#define AT91C_US_COMM_RX ((unsigned int) 0x1 << 31) /* (DBGU) COMM_RX Interrupt */
-
-/* -------- DBGU_CR : (DBGU Offset: 0x0) Debug Unit Control Register -------- */
-#define AT91C_US_RSTRX ((unsigned int) 0x1 << 2) /* (DBGU) Reset Receiver */
-#define AT91C_US_RSTTX ((unsigned int) 0x1 << 3) /* (DBGU) Reset Transmitter */
-#define AT91C_US_RXEN ((unsigned int) 0x1 << 4) /* (DBGU) Receiver Enable */
-#define AT91C_US_RXDIS ((unsigned int) 0x1 << 5) /* (DBGU) Receiver Disable */
-#define AT91C_US_TXEN ((unsigned int) 0x1 << 6) /* (DBGU) Transmitter Enable */
-#define AT91C_US_TXDIS ((unsigned int) 0x1 << 7) /* (DBGU) Transmitter Disable */
-
-#define AT91C_US_CLKS_CLOCK ((unsigned int) 0x0 << 4) /* (USART) Clock */
-#define AT91C_US_CHRL_8_BITS ((unsigned int) 0x3 << 6) /* (USART) Character Length: 8 bits */
-#define AT91C_US_PAR_NONE ((unsigned int) 0x4 << 9) /* (DBGU) No Parity */
-#define AT91C_US_NBSTOP_1_BIT ((unsigned int) 0x0 << 12) /* (USART) 1 stop bit */
-
-/*****************************************************************************/
-/* SOFTWARE API DEFINITION FOR Static Memory Controller 2 Interface */
-/*****************************************************************************/
-typedef struct _AT91S_SMC2
-{
- AT91_REG SMC2_CSR[8]; /* SMC2 Chip Select Register */
-} AT91S_SMC2, *AT91PS_SMC2;
-
-/* -------- SMC2_CSR : (SMC2 Offset: 0x0) SMC2 Chip Select Register -------- */
-#define AT91C_SMC2_NWS ((unsigned int) 0x7F << 0) /* (SMC2) Number of Wait States */
-#define AT91C_SMC2_WSEN ((unsigned int) 0x1 << 7) /* (SMC2) Wait State Enable */
-#define AT91C_SMC2_TDF ((unsigned int) 0xF << 8) /* (SMC2) Data Float Time */
-#define AT91C_SMC2_BAT ((unsigned int) 0x1 << 12) /* (SMC2) Byte Access Type */
-#define AT91C_SMC2_DBW ((unsigned int) 0x1 << 13) /* (SMC2) Data Bus Width */
-#define AT91C_SMC2_DBW_16 ((unsigned int) 0x1 << 13) /* (SMC2) 16-bit. */
-#define AT91C_SMC2_DBW_8 ((unsigned int) 0x2 << 13) /* (SMC2) 8-bit. */
-#define AT91C_SMC2_DRP ((unsigned int) 0x1 << 15) /* (SMC2) Data Read Protocol */
-#define AT91C_SMC2_ACSS ((unsigned int) 0x3 << 16) /* (SMC2) Address to Chip Select Setup */
-#define AT91C_SMC2_ACSS_STANDARD ((unsigned int) 0x0 << 16) /* (SMC2) Standard, asserted at the beginning of the access and deasserted at the end. */
-#define AT91C_SMC2_ACSS_1_CYCLE ((unsigned int) 0x1 << 16) /* (SMC2) One cycle less at the beginning and the end of the access. */
-#define AT91C_SMC2_ACSS_2_CYCLES ((unsigned int) 0x2 << 16) /* (SMC2) Two cycles less at the beginning and the end of the access. */
-#define AT91C_SMC2_ACSS_3_CYCLES ((unsigned int) 0x3 << 16) /* (SMC2) Three cycles less at the beginning and the end of the access. */
-#define AT91C_SMC2_RWSETUP ((unsigned int) 0x7 << 24) /* (SMC2) Read and Write Signal Setup Time */
-#define AT91C_SMC2_RWHOLD ((unsigned int) 0x7 << 29) /* (SMC2) Read and Write Signal Hold Time */
-
-/*****************************************************************************/
-/* SOFTWARE API DEFINITION FOR Power Management Controler */
-/*****************************************************************************/
-typedef struct _AT91S_PMC
-{
- AT91_REG PMC_SCER; /* System Clock Enable Register */
- AT91_REG PMC_SCDR; /* System Clock Disable Register */
- AT91_REG PMC_SCSR; /* System Clock Status Register */
- AT91_REG Reserved0[1]; /* */
- AT91_REG PMC_PCER; /* Peripheral Clock Enable Register */
- AT91_REG PMC_PCDR; /* Peripheral Clock Disable Register */
- AT91_REG PMC_PCSR; /* Peripheral Clock Status Register */
- AT91_REG Reserved1[5]; /* */
- AT91_REG PMC_MCKR; /* Master Clock Register */
- AT91_REG Reserved2[3]; /* */
- AT91_REG PMC_PCKR[8]; /* Programmable Clock Register */
- AT91_REG PMC_IER; /* Interrupt Enable Register */
- AT91_REG PMC_IDR; /* Interrupt Disable Register */
- AT91_REG PMC_SR; /* Status Register */
- AT91_REG PMC_IMR; /* Interrupt Mask Register */
-} AT91S_PMC, *AT91PS_PMC;
-
-/*------- PMC_SCER : (PMC Offset: 0x0) System Clock Enable Register --------*/
-#define AT91C_PMC_PCK ((unsigned int) 0x1 << 0) /* (PMC) Processor Clock */
-#define AT91C_PMC_UDP ((unsigned int) 0x1 << 1) /* (PMC) USB Device Port Clock */
-#define AT91C_PMC_MCKUDP ((unsigned int) 0x1 << 2) /* (PMC) USB Device Port Master Clock Automatic Disable on Suspend */
-#define AT91C_PMC_UHP ((unsigned int) 0x1 << 4) /* (PMC) USB Host Port Clock */
-#define AT91C_PMC_PCK0 ((unsigned int) 0x1 << 8) /* (PMC) Programmable Clock Output */
-#define AT91C_PMC_PCK1 ((unsigned int) 0x1 << 9) /* (PMC) Programmable Clock Output */
-#define AT91C_PMC_PCK2 ((unsigned int) 0x1 << 10) /* (PMC) Programmable Clock Output */
-#define AT91C_PMC_PCK3 ((unsigned int) 0x1 << 11) /* (PMC) Programmable Clock Output */
-#define AT91C_PMC_PCK4 ((unsigned int) 0x1 << 12) /* (PMC) Programmable Clock Output */
-#define AT91C_PMC_PCK5 ((unsigned int) 0x1 << 13) /* (PMC) Programmable Clock Output */
-#define AT91C_PMC_PCK6 ((unsigned int) 0x1 << 14) /* (PMC) Programmable Clock Output */
-#define AT91C_PMC_PCK7 ((unsigned int) 0x1 << 15) /* (PMC) Programmable Clock Output */
-/*-------- PMC_SCDR : (PMC Offset: 0x4) System Clock Disable Register ------*/
-/*-------- PMC_SCSR : (PMC Offset: 0x8) System Clock Status Register -------*/
-/*-------- PMC_MCKR : (PMC Offset: 0x30) Master Clock Register --------*/
-#define AT91C_PMC_CSS ((unsigned int) 0x3 << 0) /* (PMC) Programmable Clock Selection */
-#define AT91C_PMC_CSS_SLOW_CLK ((unsigned int) 0x0) /* (PMC) Slow Clock is selected */
-#define AT91C_PMC_CSS_MAIN_CLK ((unsigned int) 0x1) /* (PMC) Main Clock is selected */
-#define AT91C_PMC_CSS_PLLA_CLK ((unsigned int) 0x2) /* (PMC) Clock from PLL A is selected */
-#define AT91C_PMC_CSS_PLLB_CLK ((unsigned int) 0x3) /* (PMC) Clock from PLL B is selected */
-#define AT91C_PMC_PRES ((unsigned int) 0x7 << 2) /* (PMC) Programmable Clock Prescaler */
-#define AT91C_PMC_PRES_CLK ((unsigned int) 0x0 << 2) /* (PMC) Selected clock */
-#define AT91C_PMC_PRES_CLK_2 ((unsigned int) 0x1 << 2) /* (PMC) Selected clock divided by 2 */
-#define AT91C_PMC_PRES_CLK_4 ((unsigned int) 0x2 << 2) /* (PMC) Selected clock divided by 4 */
-#define AT91C_PMC_PRES_CLK_8 ((unsigned int) 0x3 << 2) /* (PMC) Selected clock divided by 8 */
-#define AT91C_PMC_PRES_CLK_16 ((unsigned int) 0x4 << 2) /* (PMC) Selected clock divided by 16 */
-#define AT91C_PMC_PRES_CLK_32 ((unsigned int) 0x5 << 2) /* (PMC) Selected clock divided by 32 */
-#define AT91C_PMC_PRES_CLK_64 ((unsigned int) 0x6 << 2) /* (PMC) Selected clock divided by 64 */
-#define AT91C_PMC_MDIV ((unsigned int) 0x3 << 8) /* (PMC) Master Clock Division */
-#define AT91C_PMC_MDIV_1 ((unsigned int) 0x0 << 8) /* (PMC) The master clock and the processor clock are the same */
-#define AT91C_PMC_MDIV_2 ((unsigned int) 0x1 << 8) /* (PMC) The processor clock is twice as fast as the master clock */
-#define AT91C_PMC_MDIV_3 ((unsigned int) 0x2 << 8) /* (PMC) The processor clock is three times faster than the master clock */
-#define AT91C_PMC_MDIV_4 ((unsigned int) 0x3 << 8) /* (PMC) The processor clock is four times faster than the master clock */
-/*------ PMC_PCKR : (PMC Offset: 0x40) Programmable Clock Register --------*/
-/*------ PMC_IER : (PMC Offset: 0x60) PMC Interrupt Enable Register -------*/
-#define AT91C_PMC_MOSCS ((unsigned int) 0x1 << 0) /* (PMC) MOSC Status/Enable/Disable/Mask */
-#define AT91C_PMC_LOCKA ((unsigned int) 0x1 << 1) /* (PMC) PLL A Status/Enable/Disable/Mask */
-#define AT91C_PMC_LOCKB ((unsigned int) 0x1 << 2) /* (PMC) PLL B Status/Enable/Disable/Mask */
-#define AT91C_PMC_MCKRDY ((unsigned int) 0x1 << 3) /* (PMC) MCK_RDY Status/Enable/Disable/Mask */
-#define AT91C_PMC_PCK0RDY ((unsigned int) 0x1 << 8) /* (PMC) PCK0_RDY Status/Enable/Disable/Mask */
-#define AT91C_PMC_PCK1RDY ((unsigned int) 0x1 << 9) /* (PMC) PCK1_RDY Status/Enable/Disable/Mask */
-#define AT91C_PMC_PCK2RDY ((unsigned int) 0x1 << 10) /* (PMC) PCK2_RDY Status/Enable/Disable/Mask */
-#define AT91C_PMC_PCK3RDY ((unsigned int) 0x1 << 11) /* (PMC) PCK3_RDY Status/Enable/Disable/Mask */
-#define AT91C_PMC_PCK4RDY ((unsigned int) 0x1 << 12) /* (PMC) PCK4_RDY Status/Enable/Disable/Mask */
-#define AT91C_PMC_PCK5RDY ((unsigned int) 0x1 << 13) /* (PMC) PCK5_RDY Status/Enable/Disable/Mask */
-#define AT91C_PMC_PCK6RDY ((unsigned int) 0x1 << 14) /* (PMC) PCK6_RDY Status/Enable/Disable/Mask */
-#define AT91C_PMC_PCK7RDY ((unsigned int) 0x1 << 15) /* (PMC) PCK7_RDY Status/Enable/Disable/Mask */
-/*---- PMC_IDR : (PMC Offset: 0x64) PMC Interrupt Disable Register --------*/
-/*-------- PMC_SR : (PMC Offset: 0x68) PMC Status Register --------*/
-/*-------- PMC_IMR : (PMC Offset: 0x6c) PMC Interrupt Mask Register --------*/
-
-/*****************************************************************************/
-/* SOFTWARE API DEFINITION FOR Ethernet MAC */
-/*****************************************************************************/
-typedef struct _AT91S_EMAC
-{
- AT91_REG EMAC_CTL; /* Network Control Register */
- AT91_REG EMAC_CFG; /* Network Configuration Register */
- AT91_REG EMAC_SR; /* Network Status Register */
- AT91_REG EMAC_TAR; /* Transmit Address Register */
- AT91_REG EMAC_TCR; /* Transmit Control Register */
- AT91_REG EMAC_TSR; /* Transmit Status Register */
- AT91_REG EMAC_RBQP; /* Receive Buffer Queue Pointer */
- AT91_REG Reserved0[1]; /* */
- AT91_REG EMAC_RSR; /* Receive Status Register */
- AT91_REG EMAC_ISR; /* Interrupt Status Register */
- AT91_REG EMAC_IER; /* Interrupt Enable Register */
- AT91_REG EMAC_IDR; /* Interrupt Disable Register */
- AT91_REG EMAC_IMR; /* Interrupt Mask Register */
- AT91_REG EMAC_MAN; /* PHY Maintenance Register */
- AT91_REG Reserved1[2]; /* */
- AT91_REG EMAC_FRA; /* Frames Transmitted OK Register */
- AT91_REG EMAC_SCOL; /* Single Collision Frame Register */
- AT91_REG EMAC_MCOL; /* Multiple Collision Frame Register */
- AT91_REG EMAC_OK; /* Frames Received OK Register */
- AT91_REG EMAC_SEQE; /* Frame Check Sequence Error Register */
- AT91_REG EMAC_ALE; /* Alignment Error Register */
- AT91_REG EMAC_DTE; /* Deferred Transmission Frame Register */
- AT91_REG EMAC_LCOL; /* Late Collision Register */
- AT91_REG EMAC_ECOL; /* Excessive Collision Register */
- AT91_REG EMAC_CSE; /* Carrier Sense Error Register */
- AT91_REG EMAC_TUE; /* Transmit Underrun Error Register */
- AT91_REG EMAC_CDE; /* Code Error Register */
- AT91_REG EMAC_ELR; /* Excessive Length Error Register */
- AT91_REG EMAC_RJB; /* Receive Jabber Register */
- AT91_REG EMAC_USF; /* Undersize Frame Register */
- AT91_REG EMAC_SQEE; /* SQE Test Error Register */
- AT91_REG EMAC_DRFC; /* Discarded RX Frame Register */
- AT91_REG Reserved2[3]; /* */
- AT91_REG EMAC_HSH; /* Hash Address High[63:32] */
- AT91_REG EMAC_HSL; /* Hash Address Low[31:0] */
- AT91_REG EMAC_SA1L; /* Specific Address 1 Low, First 4 bytes */
- AT91_REG EMAC_SA1H; /* Specific Address 1 High, Last 2 bytes */
- AT91_REG EMAC_SA2L; /* Specific Address 2 Low, First 4 bytes */
- AT91_REG EMAC_SA2H; /* Specific Address 2 High, Last 2 bytes */
- AT91_REG EMAC_SA3L; /* Specific Address 3 Low, First 4 bytes */
- AT91_REG EMAC_SA3H; /* Specific Address 3 High, Last 2 bytes */
- AT91_REG EMAC_SA4L; /* Specific Address 4 Low, First 4 bytes */
- AT91_REG EMAC_SA4H; /* Specific Address 4 High, Last 2 bytesr */
-} AT91S_EMAC, *AT91PS_EMAC;
-
-/* -------- EMAC_CTL : (EMAC Offset: 0x0) -------- */
-#define AT91C_EMAC_LB ((unsigned int) 0x1 << 0) /* (EMAC) Loopback. Optional. When set, loopback signal is at high level. */
-#define AT91C_EMAC_LBL ((unsigned int) 0x1 << 1) /* (EMAC) Loopback local. */
-#define AT91C_EMAC_RE ((unsigned int) 0x1 << 2) /* (EMAC) Receive enable. */
-#define AT91C_EMAC_TE ((unsigned int) 0x1 << 3) /* (EMAC) Transmit enable. */
-#define AT91C_EMAC_MPE ((unsigned int) 0x1 << 4) /* (EMAC) Management port enable. */
-#define AT91C_EMAC_CSR ((unsigned int) 0x1 << 5) /* (EMAC) Clear statistics registers. */
-#define AT91C_EMAC_ISR ((unsigned int) 0x1 << 6) /* (EMAC) Increment statistics registers. */
-#define AT91C_EMAC_WES ((unsigned int) 0x1 << 7) /* (EMAC) Write enable for statistics registers. */
-#define AT91C_EMAC_BP ((unsigned int) 0x1 << 8) /* (EMAC) Back pressure. */
-
-/* -------- EMAC_CFG : (EMAC Offset: 0x4) Network Configuration Register -------- */
-#define AT91C_EMAC_SPD ((unsigned int) 0x1 << 0) /* (EMAC) Speed. */
-#define AT91C_EMAC_FD ((unsigned int) 0x1 << 1) /* (EMAC) Full duplex. */
-#define AT91C_EMAC_BR ((unsigned int) 0x1 << 2) /* (EMAC) Bit rate. */
-#define AT91C_EMAC_CAF ((unsigned int) 0x1 << 4) /* (EMAC) Copy all frames. */
-#define AT91C_EMAC_NBC ((unsigned int) 0x1 << 5) /* (EMAC) No broadcast. */
-#define AT91C_EMAC_MTI ((unsigned int) 0x1 << 6) /* (EMAC) Multicast hash enable */
-#define AT91C_EMAC_UNI ((unsigned int) 0x1 << 7) /* (EMAC) Unicast hash enable. */
-#define AT91C_EMAC_BIG ((unsigned int) 0x1 << 8) /* (EMAC) Receive 1522 bytes. */
-#define AT91C_EMAC_EAE ((unsigned int) 0x1 << 9) /* (EMAC) External address match enable. */
-#define AT91C_EMAC_CLK ((unsigned int) 0x3 << 10) /* (EMAC) */
-#define AT91C_EMAC_CLK_HCLK_8 ((unsigned int) 0x0 << 10) /* (EMAC) HCLK divided by 8 */
-#define AT91C_EMAC_CLK_HCLK_16 ((unsigned int) 0x1 << 10) /* (EMAC) HCLK divided by 16 */
-#define AT91C_EMAC_CLK_HCLK_32 ((unsigned int) 0x2 << 10) /* (EMAC) HCLK divided by 32 */
-#define AT91C_EMAC_CLK_HCLK_64 ((unsigned int) 0x3 << 10) /* (EMAC) HCLK divided by 64 */
-#define AT91C_EMAC_RTY ((unsigned int) 0x1 << 12) /* (EMAC) */
-#define AT91C_EMAC_RMII ((unsigned int) 0x1 << 13) /* (EMAC) */
-
-/* -------- EMAC_SR : (EMAC Offset: 0x8) Network Status Register -------- */
-#define AT91C_EMAC_MDIO ((unsigned int) 0x1 << 1) /* (EMAC) */
-#define AT91C_EMAC_IDLE ((unsigned int) 0x1 << 2) /* (EMAC) */
-
-/* -------- EMAC_TCR : (EMAC Offset: 0x10) Transmit Control Register ------- */
-#define AT91C_EMAC_LEN ((unsigned int) 0x7FF << 0) /* (EMAC) */
-#define AT91C_EMAC_NCRC ((unsigned int) 0x1 << 15) /* (EMAC) */
-
-/* -------- EMAC_TSR : (EMAC Offset: 0x14) Transmit Control Register ------- */
-#define AT91C_EMAC_OVR ((unsigned int) 0x1 << 0) /* (EMAC) */
-#define AT91C_EMAC_COL ((unsigned int) 0x1 << 1) /* (EMAC) */
-#define AT91C_EMAC_RLE ((unsigned int) 0x1 << 2) /* (EMAC) */
-#define AT91C_EMAC_TXIDLE ((unsigned int) 0x1 << 3) /* (EMAC) */
-#define AT91C_EMAC_BNQ ((unsigned int) 0x1 << 4) /* (EMAC) */
-#define AT91C_EMAC_COMP ((unsigned int) 0x1 << 5) /* (EMAC) */
-#define AT91C_EMAC_UND ((unsigned int) 0x1 << 6) /* (EMAC) */
-
-/* -------- EMAC_RSR : (EMAC Offset: 0x20) Receive Status Register -------- */
-#define AT91C_EMAC_BNA ((unsigned int) 0x1 << 0) /* (EMAC) */
-#define AT91C_EMAC_REC ((unsigned int) 0x1 << 1) /* (EMAC) */
-#define AT91C_EMAC_RSR_OVR ((unsigned int) 0x1 << 2) /* (EMAC) */
-
-/* -------- EMAC_ISR : (EMAC Offset: 0x24) Interrupt Status Register ------- */
-#define AT91C_EMAC_DONE ((unsigned int) 0x1 << 0) /* (EMAC) */
-#define AT91C_EMAC_RCOM ((unsigned int) 0x1 << 1) /* (EMAC) */
-#define AT91C_EMAC_RBNA ((unsigned int) 0x1 << 2) /* (EMAC) */
-#define AT91C_EMAC_TOVR ((unsigned int) 0x1 << 3) /* (EMAC) */
-#define AT91C_EMAC_TUND ((unsigned int) 0x1 << 4) /* (EMAC) */
-#define AT91C_EMAC_RTRY ((unsigned int) 0x1 << 5) /* (EMAC) */
-#define AT91C_EMAC_TBRE ((unsigned int) 0x1 << 6) /* (EMAC) */
-#define AT91C_EMAC_TCOM ((unsigned int) 0x1 << 7) /* (EMAC) */
-#define AT91C_EMAC_TIDLE ((unsigned int) 0x1 << 8) /* (EMAC) */
-#define AT91C_EMAC_LINK ((unsigned int) 0x1 << 9) /* (EMAC) */
-#define AT91C_EMAC_ROVR ((unsigned int) 0x1 << 10) /* (EMAC) */
-#define AT91C_EMAC_HRESP ((unsigned int) 0x1 << 11) /* (EMAC) */
-
-/* -------- EMAC_IER : (EMAC Offset: 0x28) Interrupt Enable Register ------- */
-/* -------- EMAC_IDR : (EMAC Offset: 0x2c) Interrupt Disable Register ------ */
-/* -------- EMAC_IMR : (EMAC Offset: 0x30) Interrupt Mask Register -------- */
-/* -------- EMAC_MAN : (EMAC Offset: 0x34) PHY Maintenance Register -------- */
-#define AT91C_EMAC_DATA ((unsigned int) 0xFFFF << 0) /* (EMAC) */
-#define AT91C_EMAC_CODE ((unsigned int) 0x3 << 16) /* (EMAC) */
-#define AT91C_EMAC_CODE_802_3 ((unsigned int) 0x2 << 16) /* (EMAC) Write Operation */
-#define AT91C_EMAC_REGA ((unsigned int) 0x1F << 18) /* (EMAC) */
-#define AT91C_EMAC_PHYA ((unsigned int) 0x1F << 23) /* (EMAC) */
-#define AT91C_EMAC_RW ((unsigned int) 0x3 << 28) /* (EMAC) */
-#define AT91C_EMAC_RW_R ((unsigned int) 0x2 << 28) /* (EMAC) Read Operation */
-#define AT91C_EMAC_RW_W ((unsigned int) 0x1 << 28) /* (EMAC) Write Operation */
-#define AT91C_EMAC_HIGH ((unsigned int) 0x1 << 30) /* (EMAC) */
-#define AT91C_EMAC_LOW ((unsigned int) 0x1 << 31) /* (EMAC) */
-
-/*****************************************************************************/
-/* SOFTWARE API DEFINITION FOR Serial Parallel Interface */
-/*****************************************************************************/
-typedef struct _AT91S_SPI
-{
- AT91_REG SPI_CR; /* Control Register */
- AT91_REG SPI_MR; /* Mode Register */
- AT91_REG SPI_RDR; /* Receive Data Register */
- AT91_REG SPI_TDR; /* Transmit Data Register */
- AT91_REG SPI_SR; /* Status Register */
- AT91_REG SPI_IER; /* Interrupt Enable Register */
- AT91_REG SPI_IDR; /* Interrupt Disable Register */
- AT91_REG SPI_IMR; /* Interrupt Mask Register */
- AT91_REG Reserved0[4]; /* */
- AT91_REG SPI_CSR[4]; /* Chip Select Register */
- AT91_REG Reserved1[48]; /* */
- AT91_REG SPI_RPR; /* Receive Pointer Register */
- AT91_REG SPI_RCR; /* Receive Counter Register */
- AT91_REG SPI_TPR; /* Transmit Pointer Register */
- AT91_REG SPI_TCR; /* Transmit Counter Register */
- AT91_REG SPI_RNPR; /* Receive Next Pointer Register */
- AT91_REG SPI_RNCR; /* Receive Next Counter Register */
- AT91_REG SPI_TNPR; /* Transmit Next Pointer Register */
- AT91_REG SPI_TNCR; /* Transmit Next Counter Register */
- AT91_REG SPI_PTCR; /* PDC Transfer Control Register */
- AT91_REG SPI_PTSR; /* PDC Transfer Status Register */
-} AT91S_SPI, *AT91PS_SPI;
-
-/* -------- SPI_CR : (SPI Offset: 0x0) SPI Control Register -------- */
-#define AT91C_SPI_SPIEN ((unsigned int) 0x1 << 0) /* (SPI) SPI Enable */
-#define AT91C_SPI_SPIDIS ((unsigned int) 0x1 << 1) /* (SPI) SPI Disable */
-#define AT91C_SPI_SWRST ((unsigned int) 0x1 << 7) /* (SPI) SPI Software reset */
-
-/* -------- SPI_MR : (SPI Offset: 0x4) SPI Mode Register -------- */
-#define AT91C_SPI_MSTR ((unsigned int) 0x1 << 0) /* (SPI) Master/Slave Mode */
-#define AT91C_SPI_PS ((unsigned int) 0x1 << 1) /* (SPI) Peripheral Select */
-#define AT91C_SPI_PS_FIXED ((unsigned int) 0x0 << 1) /* (SPI) Fixed Peripheral Select */
-#define AT91C_SPI_PS_VARIABLE ((unsigned int) 0x1 << 1) /* (SPI) Variable Peripheral Select */
-#define AT91C_SPI_PCSDEC ((unsigned int) 0x1 << 2) /* (SPI) Chip Select Decode */
-#define AT91C_SPI_DIV32 ((unsigned int) 0x1 << 3) /* (SPI) Clock Selection */
-#define AT91C_SPI_MODFDIS ((unsigned int) 0x1 << 4) /* (SPI) Mode Fault Detection */
-#define AT91C_SPI_LLB ((unsigned int) 0x1 << 7) /* (SPI) Clock Selection */
-#define AT91C_SPI_PCS ((unsigned int) 0xF << 16) /* (SPI) Peripheral Chip Select */
-#define AT91C_SPI_DLYBCS ((unsigned int) 0xFF << 24) /* (SPI) Delay Between Chip Selects */
-
-/* -------- SPI_RDR : (SPI Offset: 0x8) Receive Data Register -------- */
-#define AT91C_SPI_RD ((unsigned int) 0xFFFF << 0) /* (SPI) Receive Data */
-#define AT91C_SPI_RPCS ((unsigned int) 0xF << 16) /* (SPI) Peripheral Chip Select Status */
-
-/* -------- SPI_TDR : (SPI Offset: 0xc) Transmit Data Register -------- */
-#define AT91C_SPI_TD ((unsigned int) 0xFFFF << 0) /* (SPI) Transmit Data */
-#define AT91C_SPI_TPCS ((unsigned int) 0xF << 16) /* (SPI) Peripheral Chip Select Status */
-
-/* -------- SPI_SR : (SPI Offset: 0x10) Status Register -------- */
-#define AT91C_SPI_RDRF ((unsigned int) 0x1 << 0) /* (SPI) Receive Data Register Full */
-#define AT91C_SPI_TDRE ((unsigned int) 0x1 << 1) /* (SPI) Transmit Data Register Empty */
-#define AT91C_SPI_MODF ((unsigned int) 0x1 << 2) /* (SPI) Mode Fault Error */
-#define AT91C_SPI_OVRES ((unsigned int) 0x1 << 3) /* (SPI) Overrun Error Status */
-#define AT91C_SPI_SPENDRX ((unsigned int) 0x1 << 4) /* (SPI) End of Receiver Transfer */
-#define AT91C_SPI_SPENDTX ((unsigned int) 0x1 << 5) /* (SPI) End of Receiver Transfer */
-#define AT91C_SPI_RXBUFF ((unsigned int) 0x1 << 6) /* (SPI) RXBUFF Interrupt */
-#define AT91C_SPI_TXBUFE ((unsigned int) 0x1 << 7) /* (SPI) TXBUFE Interrupt */
-#define AT91C_SPI_SPIENS ((unsigned int) 0x1 << 16) /* (SPI) Enable Status */
-
-/* -------- SPI_IER : (SPI Offset: 0x14) Interrupt Enable Register -------- */
-/* -------- SPI_IDR : (SPI Offset: 0x18) Interrupt Disable Register ------- */
-/* -------- SPI_IMR : (SPI Offset: 0x1c) Interrupt Mask Register -------- */
-/* -------- SPI_CSR : (SPI Offset: 0x30) Chip Select Register -------- */
-#define AT91C_SPI_CPOL ((unsigned int) 0x1 << 0) /* (SPI) Clock Polarity */
-#define AT91C_SPI_NCPHA ((unsigned int) 0x1 << 1) /* (SPI) Clock Phase */
-#define AT91C_SPI_BITS ((unsigned int) 0xF << 4) /* (SPI) Bits Per Transfer */
-#define AT91C_SPI_BITS_8 ((unsigned int) 0x0 << 4) /* (SPI) 8 Bits Per transfer */
-#define AT91C_SPI_BITS_9 ((unsigned int) 0x1 << 4) /* (SPI) 9 Bits Per transfer */
-#define AT91C_SPI_BITS_10 ((unsigned int) 0x2 << 4) /* (SPI) 10 Bits Per transfer */
-#define AT91C_SPI_BITS_11 ((unsigned int) 0x3 << 4) /* (SPI) 11 Bits Per transfer */
-#define AT91C_SPI_BITS_12 ((unsigned int) 0x4 << 4) /* (SPI) 12 Bits Per transfer */
-#define AT91C_SPI_BITS_13 ((unsigned int) 0x5 << 4) /* (SPI) 13 Bits Per transfer */
-#define AT91C_SPI_BITS_14 ((unsigned int) 0x6 << 4) /* (SPI) 14 Bits Per transfer */
-#define AT91C_SPI_BITS_15 ((unsigned int) 0x7 << 4) /* (SPI) 15 Bits Per transfer */
-#define AT91C_SPI_BITS_16 ((unsigned int) 0x8 << 4) /* (SPI) 16 Bits Per transfer */
-#define AT91C_SPI_SCBR ((unsigned int) 0xFF << 8) /* (SPI) Serial Clock Baud Rate */
-#define AT91C_SPI_DLYBS ((unsigned int) 0xFF << 16) /* (SPI) Serial Clock Baud Rate */
-#define AT91C_SPI_DLYBCT ((unsigned int) 0xFF << 24) /* (SPI) Delay Between Consecutive Transfers */
-
-/*****************************************************************************/
-/* SOFTWARE API DEFINITION FOR Peripheral Data Controller */
-/*****************************************************************************/
-typedef struct _AT91S_PDC
-{
- AT91_REG PDC_RPR; /* Receive Pointer Register */
- AT91_REG PDC_RCR; /* Receive Counter Register */
- AT91_REG PDC_TPR; /* Transmit Pointer Register */
- AT91_REG PDC_TCR; /* Transmit Counter Register */
- AT91_REG PDC_RNPR; /* Receive Next Pointer Register */
- AT91_REG PDC_RNCR; /* Receive Next Counter Register */
- AT91_REG PDC_TNPR; /* Transmit Next Pointer Register */
- AT91_REG PDC_TNCR; /* Transmit Next Counter Register */
- AT91_REG PDC_PTCR; /* PDC Transfer Control Register */
- AT91_REG PDC_PTSR; /* PDC Transfer Status Register */
-} AT91S_PDC, *AT91PS_PDC;
-
-/* -------- PDC_PTCR : (PDC Offset: 0x20) PDC Transfer Control Register -------- */
-#define AT91C_PDC_RXTEN ((unsigned int) 0x1 << 0) /* (PDC) Receiver Transfer Enable */
-#define AT91C_PDC_RXTDIS ((unsigned int) 0x1 << 1) /* (PDC) Receiver Transfer Disable */
-#define AT91C_PDC_TXTEN ((unsigned int) 0x1 << 8) /* (PDC) Transmitter Transfer Enable */
-#define AT91C_PDC_TXTDIS ((unsigned int) 0x1 << 9) /* (PDC) Transmitter Transfer Disable */
-/* -------- PDC_PTSR : (PDC Offset: 0x24) PDC Transfer Status Register -------- */
-
-/* ========== Register definition ==================================== */
-#define AT91C_SPI_CSR ((AT91_REG *) 0xFFFE0030) /* (SPI) Chip Select Register */
-#define AT91C_PMC_PCER ((AT91_REG *) 0xFFFFFC10) /* (PMC) Peripheral Clock Enable Register */
-#define AT91C_PMC_PCDR ((AT91_REG *) 0xFFFFFC14) /* (PMC) Peripheral Clock Enable Register */
-#define AT91C_PMC_SCER ((AT91_REG *) 0xFFFFFC00) /* (PMC) Peripheral Clock Enable Register */
-#define AT91C_PMC_SCDR ((AT91_REG *) 0xFFFFFC04) /* (PMC) Peripheral Clock Enable Register */
-#define AT91C_PIOA_PER ((AT91_REG *) 0xFFFFF400) /* (PIOA) PIO Enable Register */
-#define AT91C_PIOA_PDR ((AT91_REG *) 0xFFFFF404) /* (PIOA) PIO Disable Register */
-#define AT91C_PIOA_PSR ((AT91_REG *) 0xFFFFF408) /* (PIOA) PIO Status Register */
-#define AT91C_PIOA_OER ((AT91_REG *) 0xFFFFF410) /* (PIOA) PIO Output Enable Register */
-#define AT91C_PIOA_ODR ((AT91_REG *) 0xFFFFF414) /* (PIOA) PIO Output Disable Register */
-#define AT91C_PIOA_OSR ((AT91_REG *) 0xFFFFF418) /* (PIOA) PIO Output Status Register */
-#define AT91C_PIOA_IFER ((AT91_REG *) 0xFFFFF420) /* (PIOA) PIO Glitch Input Filter Enable Register */
-#define AT91C_PIOA_IFDR ((AT91_REG *) 0xFFFFF424) /* (PIOA) PIO Glitch Input Filter Disable Register */
-#define AT91C_PIOA_IFSR ((AT91_REG *) 0xFFFFF428) /* (PIOA) PIO Glitch Input Filter Status Register */
-#define AT91C_PIOA_SODR ((AT91_REG *) 0xFFFFF430) /* (PIOA) PIO Set Output Data Register */
-#define AT91C_PIOA_CODR ((AT91_REG *) 0xFFFFF434) /* (PIOA) PIO Clear Output Data Register */
-#define AT91C_PIOA_ODSR ((AT91_REG *) 0xFFFFF438) /* (PIOA) PIO Output Data Status Register */
-#define AT91C_PIOA_PDSR ((AT91_REG *) 0xFFFFF43C) /* (PIOA) PIO Pin Data Status Register */
-#define AT91C_PIOA_IER ((AT91_REG *) 0xFFFFF440) /* (PIOA) PIO Interrupt Enable Register */
-#define AT91C_PIOA_IDR ((AT91_REG *) 0xFFFFF444) /* (PIOA) PIO Interrupt Disable Register */
-#define AT91C_PIOA_IMR ((AT91_REG *) 0xFFFFF448) /* (PIOA) PIO Interrupt Mask Register */
-#define AT91C_PIOA_ISR ((AT91_REG *) 0xFFFFF44C) /* (PIOA) PIO Interrupt Status Register */
-#define AT91C_PIOA_MDER ((AT91_REG *) 0xFFFFF450) /* (PIOA) PIO Multi-drive Enable Register */
-#define AT91C_PIOA_MDDR ((AT91_REG *) 0xFFFFF454) /* (PIOA) PIO Multi-drive Disable Register */
-#define AT91C_PIOA_MDSR ((AT91_REG *) 0xFFFFF458) /* (PIOA) PIO Multi-drive Status Register */
-#define AT91C_PIOA_PUDR ((AT91_REG *) 0xFFFFF460) /* (PIOA) PIO Pull-up Disable Register */
-#define AT91C_PIOA_PUER ((AT91_REG *) 0xFFFFF464) /* (PIOA) PIO Pull-up Enable Register */
-#define AT91C_PIOA_PUSR ((AT91_REG *) 0xFFFFF468) /* (PIOA) PIO Pull-up Status Register */
-#define AT91C_PIOA_ASR ((AT91_REG *) 0xFFFFF470) /* (PIOA) PIO Peripheral A Select Register */
-#define AT91C_PIOA_BSR ((AT91_REG *) 0xFFFFF474) /* (PIOA) PIO Peripheral B Select Register */
-#define AT91C_PIOA_ABSR ((AT91_REG *) 0xFFFFF478) /* (PIOA) PIO Peripheral AB Select Register */
-#define AT91C_PIOA_OWER ((AT91_REG *) 0xFFFFF4A0) /* (PIOA) PIO Output Write Enable Register */
-#define AT91C_PIOA_OWDR ((AT91_REG *) 0xFFFFF4A4) /* (PIOA) PIO Output Write Disable Register */
-#define AT91C_PIOA_OWSR ((AT91_REG *) 0xFFFFF4A8) /* (PIOA) PIO Output Write Status Register */
-#define AT91C_PIOB_PDR ((AT91_REG *) 0xFFFFF604) /* (PIOB) PIO Disable Register */
-
-#define AT91C_PIO_PA30 ((unsigned int) 1 << 30) /* Pin Controlled by PA30 */
-#define AT91C_PIO_PC0 ((unsigned int) 1 << 0) /* Pin Controlled by PC0 */
-#define AT91C_PC0_BFCK ((unsigned int) AT91C_PIO_PC0) /* Burst Flash Clock */
-#define AT91C_PA30_DRXD ((unsigned int) AT91C_PIO_PA30) /* DBGU Debug Receive Data */
-#define AT91C_PIO_PA31 ((unsigned int) 1 << 31) /* Pin Controlled by PA31 */
-#define AT91C_PA25_TWD ((unsigned int) 1 << 25)
-#define AT91C_PA26_TWCK ((unsigned int) 1 << 26)
-#define AT91C_PA31_DTXD ((unsigned int) AT91C_PIO_PA31) /* DBGU Debug Transmit Data */
-#define AT91C_PIO_PA17 ((unsigned int) 1 << 17) /* Pin Controlled by PA17 */
-#define AT91C_PA17_TXD0 AT91C_PIO_PA17 /* USART0 Transmit Data */
-#define AT91C_PIO_PA18 ((unsigned int) 1 << 18) /* Pin Controlled by PA18 */
-#define AT91C_PA18_RXD0 AT91C_PIO_PA18 /* USART0 Receive Data */
-#define AT91C_PIO_PB20 ((unsigned int) 1 << 20) /* Pin Controlled by PB20 */
-#define AT91C_PB20_RXD1 AT91C_PIO_PB20 /* USART1 Receive Data */
-#define AT91C_PIO_PB21 ((unsigned int) 1 << 21) /* Pin Controlled by PB21 */
-#define AT91C_PB21_TXD1 AT91C_PIO_PB21 /* USART1 Transmit Data */
-
-#define AT91C_ID_SYS ((unsigned int) 1) /* System Peripheral */
-#define AT91C_ID_PIOA ((unsigned int) 2) /* PIO port A */
-#define AT91C_ID_PIOB ((unsigned int) 3) /* PIO port B */
-#define AT91C_ID_PIOC ((unsigned int) 4) /* PIO port C */
-#define AT91C_ID_USART0 ((unsigned int) 6) /* USART 0 */
-#define AT91C_ID_USART1 ((unsigned int) 7) /* USART 1 */
-#define AT91C_ID_TWI ((unsigned int) 12) /* Two Wire Interface */
-#define AT91C_ID_SPI ((unsigned int) 13) /* Serial Peripheral Interface */
-#define AT91C_ID_TC0 ((unsigned int) 17) /* Timer Counter 0 */
-#define AT91C_ID_UHP ((unsigned int) 23) /* OHCI USB Host Port */
-#define AT91C_ID_EMAC ((unsigned int) 24) /* Ethernet MAC */
-
-#define AT91C_PIO_PC1 ((unsigned int) 1 << 1) /* Pin Controlled by PC1 */
-#define AT91C_PC1_BFRDY_SMOE ((unsigned int) AT91C_PIO_PC1) /* Burst Flash Ready */
-#define AT91C_PIO_PC3 ((unsigned int) 1 << 3) /* Pin Controlled by PC3 */
-#define AT91C_PC3_BFBAA_SMWE ((unsigned int) AT91C_PIO_PC3) /* Burst Flash Address Advance / SmartMedia Write Enable */
-#define AT91C_PIO_PC2 ((unsigned int) 1 << 2) /* Pin Controlled by PC2 */
-#define AT91C_PC2_BFAVD ((unsigned int) AT91C_PIO_PC2) /* Burst Flash Address Valid */
-#define AT91C_PIO_PB1 ((unsigned int) 1 << 1) /* Pin Controlled by PB1 */
-
-#define AT91C_PIO_PA23 ((unsigned int) 1 << 23) /* Pin Controlled by PA23 */
-#define AT91C_PA23_TXD2 ((unsigned int) AT91C_PIO_PA23) /* USART 2 Transmit Data */
-
-#define AT91C_PIO_PA0 ((unsigned int) 1 << 0) /* Pin Controlled by PA0 */
-#define AT91C_PA0_MISO ((unsigned int) AT91C_PIO_PA0) /* SPI Master In Slave */
-#define AT91C_PIO_PA1 ((unsigned int) 1 << 1) /* Pin Controlled by PA1 */
-#define AT91C_PA1_MOSI ((unsigned int) AT91C_PIO_PA1) /* SPI Master Out Slave */
-#define AT91C_PIO_PA2 ((unsigned int) 1 << 2) /* Pin Controlled by PA2 */
-#define AT91C_PA2_SPCK ((unsigned int) AT91C_PIO_PA2) /* SPI Serial Clock */
-#define AT91C_PIO_PA3 ((unsigned int) 1 << 3) /* Pin Controlled by PA3 */
-#define AT91C_PA3_NPCS0 ((unsigned int) AT91C_PIO_PA3) /* SPI Peripheral Chip Select 0 */
-#define AT91C_PIO_PA4 ((unsigned int) 1 << 4) /* Pin Controlled by PA4 */
-#define AT91C_PA4_NPCS1 ((unsigned int) AT91C_PIO_PA4) /* SPI Peripheral Chip Select 1 */
-#define AT91C_PIO_PA5 ((unsigned int) 1 << 5) /* Pin Controlled by PA5 */
-#define AT91C_PA5_NPCS2 ((unsigned int) AT91C_PIO_PA5) /* SPI Peripheral Chip Select 2 */
-#define AT91C_PIO_PA6 ((unsigned int) 1 << 6) /* Pin Controlled by PA6 */
-#define AT91C_PA6_NPCS3 ((unsigned int) AT91C_PIO_PA6) /* SPI Peripheral Chip Select 3 */
-
-#define AT91C_PIO_PA16 ((unsigned int) 1 << 16) /* Pin Controlled by PA16 */
-#define AT91C_PA16_EMDIO ((unsigned int) AT91C_PIO_PA16) /* Ethernet MAC Management Data Input/Output */
-#define AT91C_PIO_PA15 ((unsigned int) 1 << 15) /* Pin Controlled by PA15 */
-#define AT91C_PA15_EMDC ((unsigned int) AT91C_PIO_PA15) /* Ethernet MAC Management Data Clock */
-#define AT91C_PIO_PA14 ((unsigned int) 1 << 14) /* Pin Controlled by PA14 */
-#define AT91C_PA14_ERXER ((unsigned int) AT91C_PIO_PA14) /* Ethernet MAC Receive Error */
-#define AT91C_PIO_PA13 ((unsigned int) 1 << 13) /* Pin Controlled by PA13 */
-#define AT91C_PA13_ERX1 ((unsigned int) AT91C_PIO_PA13) /* Ethernet MAC Receive Data 1 */
-#define AT91C_PIO_PA12 ((unsigned int) 1 << 12) /* Pin Controlled by PA12 */
-#define AT91C_PA12_ERX0 ((unsigned int) AT91C_PIO_PA12) /* Ethernet MAC Receive Data 0 */
-#define AT91C_PIO_PA11 ((unsigned int) 1 << 11) /* Pin Controlled by PA11 */
-#define AT91C_PA11_ECRS_ECRSDV ((unsigned int) AT91C_PIO_PA11) /* Ethernet MAC Carrier Sense/Carrier Sense and Data Valid */
-#define AT91C_PIO_PA10 ((unsigned int) 1 << 10) /* Pin Controlled by PA10 */
-#define AT91C_PA10_ETX1 ((unsigned int) AT91C_PIO_PA10) /* Ethernet MAC Transmit Data 1 */
-#define AT91C_PIO_PA9 ((unsigned int) 1 << 9) /* Pin Controlled by PA9 */
-#define AT91C_PA9_ETX0 ((unsigned int) AT91C_PIO_PA9) /* Ethernet MAC Transmit Data 0 */
-#define AT91C_PIO_PA8 ((unsigned int) 1 << 8) /* Pin Controlled by PA8 */
-#define AT91C_PA8_ETXEN ((unsigned int) AT91C_PIO_PA8) /* Ethernet MAC Transmit Enable */
-#define AT91C_PIO_PA7 ((unsigned int) 1 << 7) /* Pin Controlled by PA7 */
-#define AT91C_PA7_ETXCK_EREFCK ((unsigned int) AT91C_PIO_PA7) /* Ethernet MAC Transmit Clock/Reference Clock */
-
-#define AT91C_PIO_PB0 ((unsigned int) 1 << 0) /* Pin Controlled by PB3 */
-#define AT91C_PIO_PB1 ((unsigned int) 1 << 1) /* Pin Controlled by PB3 */
-#define AT91C_PIO_PB2 ((unsigned int) 1 << 2) /* Pin Controlled by PB3 */
-#define AT91C_PIO_PB3 ((unsigned int) 1 << 3) /* Pin Controlled by PB3 */
-#define AT91C_PIO_PB4 ((unsigned int) 1 << 4) /* Pin Controlled by PB4 */
-#define AT91C_PIO_PB5 ((unsigned int) 1 << 5) /* Pin Controlled by PB5 */
-#define AT91C_PIO_PB6 ((unsigned int) 1 << 6) /* Pin Controlled by PB6 */
-#define AT91C_PIO_PB7 ((unsigned int) 1 << 7) /* Pin Controlled by PB7 */
-#define AT91C_PIO_PB22 ((unsigned int) 1 << 22) /* Pin Controlled by PB22 */
-#define AT91C_PIO_PB25 ((unsigned int) 1 << 25) /* Pin Controlled by PB25 */
-#define AT91C_PB25_DSR1 ((unsigned int) AT91C_PIO_PB25) /* USART 1 Data Set ready */
-#define AT91C_PB25_EF100 ((unsigned int) AT91C_PIO_PB25) /* Ethernet MAC Force 100 Mbits */
-#define AT91C_PIO_PB19 ((unsigned int) 1 << 19) /* Pin Controlled by PB19 */
-#define AT91C_PB19_DTR1 ((unsigned int) AT91C_PIO_PB19) /* USART 1 Data Terminal ready */
-#define AT91C_PB19_ERXCK ((unsigned int) AT91C_PIO_PB19) /* Ethernet MAC Receive Clock */
-#define AT91C_PIO_PB18 ((unsigned int) 1 << 18) /* Pin Controlled by PB18 */
-#define AT91C_PB18_RI1 ((unsigned int) AT91C_PIO_PB18) /* USART 1 Ring Indicator */
-#define AT91C_PB18_ECOL ((unsigned int) AT91C_PIO_PB18) /* Ethernet MAC Collision Detected */
-#define AT91C_PIO_PB17 ((unsigned int) 1 << 17) /* Pin Controlled by PB17 */
-#define AT91C_PB17_RF2 ((unsigned int) AT91C_PIO_PB17) /* SSC Receive Frame Sync 2 */
-#define AT91C_PB17_ERXDV ((unsigned int) AT91C_PIO_PB17) /* Ethernet MAC Receive Data Valid */
-#define AT91C_PIO_PB16 ((unsigned int) 1 << 16) /* Pin Controlled by PB16 */
-#define AT91C_PB16_RK2 ((unsigned int) AT91C_PIO_PB16) /* SSC Receive Clock 2 */
-#define AT91C_PB16_ERX3 ((unsigned int) AT91C_PIO_PB16) /* Ethernet MAC Receive Data 3 */
-#define AT91C_PIO_PB15 ((unsigned int) 1 << 15) /* Pin Controlled by PB15 */
-#define AT91C_PB15_RD2 ((unsigned int) AT91C_PIO_PB15) /* SSC Receive Data 2 */
-#define AT91C_PB15_ERX2 ((unsigned int) AT91C_PIO_PB15) /* Ethernet MAC Receive Data 2 */
-#define AT91C_PIO_PB14 ((unsigned int) 1 << 14) /* Pin Controlled by PB14 */
-#define AT91C_PB14_TD2 ((unsigned int) AT91C_PIO_PB14) /* SSC Transmit Data 2 */
-#define AT91C_PB14_ETXER ((unsigned int) AT91C_PIO_PB14) /* Ethernet MAC Transmikt Coding Error */
-#define AT91C_PIO_PB13 ((unsigned int) 1 << 13) /* Pin Controlled by PB13 */
-#define AT91C_PB13_TK2 ((unsigned int) AT91C_PIO_PB13) /* SSC Transmit Clock 2 */
-#define AT91C_PB13_ETX3 ((unsigned int) AT91C_PIO_PB13) /* Ethernet MAC Transmit Data 3 */
-#define AT91C_PIO_PB12 ((unsigned int) 1 << 12) /* Pin Controlled by PB12 */
-#define AT91C_PB12_TF2 ((unsigned int) AT91C_PIO_PB12) /* SSC Transmit Frame Sync 2 */
-#define AT91C_PB12_ETX2 ((unsigned int) AT91C_PIO_PB12) /* Ethernet MAC Transmit Data 2 */
-
-#define AT91C_PIOB_BSR ((AT91_REG *) 0xFFFFF674) /* (PIOB) Select B Register */
-#define AT91C_PIOB_PDR ((AT91_REG *) 0xFFFFF604) /* (PIOB) PIO Disable Register */
-
-#define AT91C_EBI_CS3A_SMC_SmartMedia ((unsigned int) 0x1 << 3) /* (EBI) Chip Select 3 is assigned to the Static Memory Controller and the SmartMedia Logic is activated. */
-#define AT91C_SMC2_ACSS_STANDARD ((unsigned int) 0x0 << 16) /* (SMC2) Standard, asserted at the beginning of the access and deasserted at the end. */
-#define AT91C_SMC2_DBW_8 ((unsigned int) 0x2 << 13) /* (SMC2) 8-bit. */
-#define AT91C_SMC2_WSEN ((unsigned int) 0x1 << 7) /* (SMC2) Wait State Enable */
-#define AT91C_PIOC_ASR ((AT91_REG *) 0xFFFFF870) /* (PIOC) Select A Register */
-#define AT91C_PIOC_SODR ((AT91_REG *) 0xFFFFF830) /* (PIOC) Set Output Data Register */
-#define AT91C_PIOC_CODR ((AT91_REG *) 0xFFFFF834) /* (PIOC) Clear Output Data Register */
-#define AT91C_PIOC_PDSR ((AT91_REG *) 0xFFFFF83C) /* (PIOC) Pin Data Status Register */
-
-#define AT91C_BASE_AIC ((AT91PS_AIC) 0xFFFFF000) /* (AIC) Base Address */
-#define AT91C_BASE_DBGU ((AT91PS_DBGU) 0xFFFFF200) /* (DBGU) Base Address */
-#define AT91C_BASE_PIOA ((AT91PS_PIO) 0xFFFFF400) /* (PIOA) Base Address */
-#define AT91C_BASE_PIOB ((AT91PS_PIO) 0xFFFFF600) /* (PIOB) Base Address */
-#define AT91C_BASE_PIOC ((AT91PS_PIO) 0xFFFFF800) /* (PIOC) Base Address */
-#define AT91C_BASE_PIOD ((AT91PS_PIO) 0xFFFFFA00) /* (PIOC) Base Address */
-#define AT91C_BASE_PMC ((AT91PS_PMC) 0xFFFFFC00) /* (PMC) Base Address */
-#if 0
-#define AT91C_BASE_ST ((AT91PS_ST) 0xFFFFFD00) /* (PMC) Base Address */
-#define AT91C_BASE_RTC ((AT91PS_RTC) 0xFFFFFE00) /* (PMC) Base Address */
-#define AT91C_BASE_MC ((AT91PS_MC) 0xFFFFFF00) /* (PMC) Base Address */
-#endif
-
-#define AT91C_BASE_TC0 ((AT91PS_TC) 0xFFFA0000) /* (TC0) Base Address */
-#define AT91C_BASE_TC1 ((AT91PS_TC) 0xFFFA4000) /* (TC0) Base Address */
-#if 0
-#define AT91C_BASE_UDP ((AT91PS_UDP) 0xFFFB0000) /* (TC0) Base Address */
-#define AT91C_BASE_MCI ((AT91PS_MCI) 0xFFFB4000) /* (TC0) Base Address */
-#define AT91C_BASE_TWI ((AT91PS_TWI) 0xFFFB8000) /* (TC0) Base Address */
-#endif
-#define AT91C_BASE_EMAC ((AT91PS_EMAC) 0xFFFBC000) /* (EMAC) Base Address */
-#define AT91C_BASE_US0 ((AT91PS_USART) 0xFFFC0000) /* (US0) Base Address */
-#define AT91C_BASE_US1 ((AT91PS_USART) 0xFFFC4000) /* (US1) Base Address */
-#define AT91C_BASE_US2 ((AT91PS_USART) 0xFFFC8000) /* (US1) Base Address */
-#define AT91C_BASE_US3 ((AT91PS_USART) 0xFFFCC000) /* (US1) Base Address */
-#define AT91C_BASE_SPI ((AT91PS_SPI) 0xFFFE0000) /* (SPI) Base Address */
-
-#define AT91C_BASE_CKGR ((AT91PS_CKGR) 0xFFFFFC20) /* (CKGR) Base Address */
-#define AT91C_EBI_CSA ((AT91_REG *) 0xFFFFFF60) /* (EBI) Chip Select Assignment Register */
-#define AT91C_BASE_SMC2 ((AT91PS_SMC2) 0xFFFFFF70) /* (SMC2) Base Address */
-#define AT91C_TCB0_BMR ((AT91_REG *) 0xFFFA00C4) /* (TCB0) TC Block Mode Register */
-#define AT91C_TCB0_BCR ((AT91_REG *) 0xFFFA00C0) /* (TCB0) TC Block Control Register */
-#define AT91C_PIOC_PDR ((AT91_REG *) 0xFFFFF804) /* (PIOC) PIO Disable Register */
-#define AT91C_PIOC_PER ((AT91_REG *) 0xFFFFF800) /* (PIOC) PIO Enable Register */
-#define AT91C_PIOC_ODR ((AT91_REG *) 0xFFFFF814) /* (PIOC) Output Disable Registerr */
-#define AT91C_PIOB_PER ((AT91_REG *) 0xFFFFF600) /* (PIOB) PIO Enable Register */
-#define AT91C_PIOB_ODR ((AT91_REG *) 0xFFFFF614) /* (PIOB) Output Disable Registerr */
-#define AT91C_PIOB_PDSR ((AT91_REG *) 0xFFFFF63C) /* (PIOB) Pin Data Status Register */
-
-#else
-/* flash */
-#define AT91C_MC_PUIA 0xFFFFFF10
-#define AT91C_MC_PUP 0xFFFFFF50
-#define AT91C_MC_PUER 0xFFFFFF54
-#define AT91C_MC_ASR 0xFFFFFF04
-#define AT91C_MC_AASR 0xFFFFFF08
-#define AT91C_EBI_CFGR 0xFFFFFF64
-#define AT91C_SMC_CSR0 0xFFFFFF70
-
-/* clocks */
-#define AT91C_PLLAR 0xFFFFFC28
-#define AT91C_PLLBR 0xFFFFFC2C
-#define AT91C_MCKR 0xFFFFFC30
-
-#define AT91C_BASE_CKGR 0xFFFFFC20
-#define AT91C_CKGR_MOR 0
-
-/* sdram */
-#define AT91C_PIOC_ASR 0xFFFFF870
-#define AT91C_PIOC_BSR 0xFFFFF874
-#define AT91C_PIOC_PDR 0xFFFFF804
-#define AT91C_EBI_CSA 0xFFFFFF60
-#define AT91C_SDRC_CR 0xFFFFFF98
-#define AT91C_SDRC_MR 0xFFFFFF90
-#define AT91C_SDRC_TR 0xFFFFFF94
-
-#endif /* __ASSEMBLY__ */
-#endif /* AT91RM9200_H */
diff --git a/arch/arm/include/asm/arch-at91rm9200/hardware.h b/arch/arm/include/asm/arch-at91rm9200/hardware.h
deleted file mode 100644
index b868e38..0000000
--- a/arch/arm/include/asm/arch-at91rm9200/hardware.h
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * linux/include/asm-arm/arch-at91/hardware.h
- *
- * Copyright (C) 2003 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/sizes.h>
-
-#ifndef __ASSEMBLY__
-#include "AT91RM9200.h"
-#endif
-
-/* Virtual and Physical base address for system peripherals */
-#define AT91_SYS_BASE 0xFFFFF000 /*4K */
-
-/* Virtual and Physical base addresses of user peripherals */
-#define AT91_SPI_BASE 0xFFFE0000 /*16K */
-#define AT91_SSC2_BASE 0xFFFD8000 /*16K */
-#define AT91_SSC1_BASE 0xFFFD4000 /*16K */
-#define AT91_SSC0_BASE 0xFFFD0000 /*16K */
-#define AT91_USART3_BASE 0xFFFCC000 /*16K */
-#define AT91_USART2_BASE 0xFFFC8000 /*16K */
-#define AT91_USART1_BASE 0xFFFC4000 /*16K */
-#define AT91_USART0_BASE 0xFFFC0000 /*16K */
-#define AT91_EMAC_BASE 0xFFFBC000 /*16K */
-#define AT91_TWI_BASE 0xFFFB8000 /*16K */
-#define AT91_MCI_BASE 0xFFFB4000 /*16K */
-#define AT91_UDP_BASE 0xFFFB0000 /*16K */
-#define AT91_TCB1_BASE 0xFFFA4000 /*16K */
-#define AT91_TCB0_BASE 0xFFFA0000 /*16K */
-
-#define AT91_USB_HOST_BASE 0x00300000
-
-/*
- * Where in virtual memory the IO devices (timers, system controllers
- * and so on)
- */
-#define AT91_IO_BASE 0xF0000000 /* Virt/Phys Address of IO */
-
-/* FLASH */
-#define AT91_FLASH_BASE 0x10000000 /* NCS0 */
-
-/* SDRAM */
-#define AT91_SDRAM_BASE 0x20000000 /* NCS1 */
-
-/* SmartMedia */
-#define AT91_SMARTMEDIA_BASE 0x40000000 /* NCS3 */
-
-/* Definition of interrupt priority levels */
-#define AT91C_AIC_PRIOR_0 AT91C_AIC_PRIOR_LOWEST
-#define AT91C_AIC_PRIOR_1 ((unsigned int) 0x1)
-#define AT91C_AIC_PRIOR_2 ((unsigned int) 0x2)
-#define AT91C_AIC_PRIOR_3 ((unsigned int) 0x3)
-#define AT91C_AIC_PRIOR_4 ((unsigned int) 0x4)
-#define AT91C_AIC_PRIOR_5 ((unsigned int) 0x5)
-#define AT91C_AIC_PRIOR_6 ((unsigned int) 0x6)
-#define AT91C_AIC_PRIOR_7 AT91C_AIC_PRIOR_HIGEST
-
-#endif
diff --git a/arch/arm/include/asm/arch-davinci/davinci_misc.h b/arch/arm/include/asm/arch-davinci/davinci_misc.h
index 347aa89..211b769 100644
--- a/arch/arm/include/asm/arch-davinci/davinci_misc.h
+++ b/arch/arm/include/asm/arch-davinci/davinci_misc.h
@@ -57,7 +57,7 @@
int davinci_configure_pin_mux(const struct pinmux_config *pins, int n_pins);
int davinci_configure_pin_mux_items(const struct pinmux_resource *item,
int n_items);
-#if defined(CONFIG_DRIVER_TI_EMAC) && defined(CONFIG_MACH_DAVINCI_DA850_EVM)
+#if defined(CONFIG_DRIVER_TI_EMAC) && defined(CONFIG_SOC_DA8XX)
void davinci_emac_mii_mode_sel(int mode_sel);
#endif
#if defined(CONFIG_SOC_DA8XX)
diff --git a/arch/arm/include/asm/arch-davinci/gpio_defs.h b/arch/arm/include/asm/arch-davinci/gpio.h
similarity index 90%
rename from arch/arm/include/asm/arch-davinci/gpio_defs.h
rename to arch/arm/include/asm/arch-davinci/gpio.h
index 1be2ac2..29dcccf 100644
--- a/arch/arm/include/asm/arch-davinci/gpio_defs.h
+++ b/arch/arm/include/asm/arch-davinci/gpio.h
@@ -63,4 +63,12 @@
#define davinci_gpio_bank45 ((struct davinci_gpio *)DAVINCI_GPIO_BANK45)
#define davinci_gpio_bank67 ((struct davinci_gpio *)DAVINCI_GPIO_BANK67)
+#define gpio_status() gpio_info()
+#define GPIO_NAME_SIZE 20
+#define MAX_NUM_GPIOS 144
+#define GPIO_BANK(gp) (davinci_gpio_bank01 + ((gp) >> 5))
+#define GPIO_BIT(gp) ((gp) & 0x1F)
+
+void gpio_info(void);
+
#endif
diff --git a/arch/arm/include/asm/arch-davinci/hardware.h b/arch/arm/include/asm/arch-davinci/hardware.h
index df3f549..f537c4b 100644
--- a/arch/arm/include/asm/arch-davinci/hardware.h
+++ b/arch/arm/include/asm/arch-davinci/hardware.h
@@ -140,6 +140,8 @@
#define DAVINCI_EMAC_WRAPPER_CNTRL_REGS_BASE 0x01e22000
#define DAVINCI_EMAC_WRAPPER_RAM_BASE 0x01e20000
#define DAVINCI_MDIO_CNTRL_REGS_BASE 0x01e24000
+#define DAVINCI_MMC_SD0_BASE 0x01c40000
+#define DAVINCI_MMC_SD1_BASE 0x01e1b000
#define DAVINCI_ASYNC_EMIF_CNTRL_BASE 0x68000000
#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x40000000
#define DAVINCI_ASYNC_EMIF_DATA_CE2_BASE 0x60000000
@@ -213,47 +215,65 @@
#else /* CONFIG_SOC_DA8XX */
-enum davinci_lpsc_ids {
- DAVINCI_LPSC_TPCC = 0,
- DAVINCI_LPSC_TPTC0,
- DAVINCI_LPSC_TPTC1,
- DAVINCI_LPSC_AEMIF,
- DAVINCI_LPSC_SPI0,
- DAVINCI_LPSC_MMC_SD,
- DAVINCI_LPSC_AINTC,
- DAVINCI_LPSC_ARM_RAM_ROM,
- DAVINCI_LPSC_SECCTL_KEYMGR,
- DAVINCI_LPSC_UART0,
- DAVINCI_LPSC_SCR0,
- DAVINCI_LPSC_SCR1,
- DAVINCI_LPSC_SCR2,
- DAVINCI_LPSC_DMAX,
- DAVINCI_LPSC_ARM,
- DAVINCI_LPSC_GEM,
- /* for LPSCs in PSC1, offset from 32 for differentiation */
- DAVINCI_LPSC_PSC1_BASE = 32,
- DAVINCI_LPSC_USB11,
- DAVINCI_LPSC_USB20,
- DAVINCI_LPSC_GPIO,
- DAVINCI_LPSC_UHPI,
- DAVINCI_LPSC_EMAC,
- DAVINCI_LPSC_DDR_EMIF,
- DAVINCI_LPSC_McASP0,
- DAVINCI_LPSC_McASP1,
- DAVINCI_LPSC_McASP2,
- DAVINCI_LPSC_SPI1,
- DAVINCI_LPSC_I2C1,
- DAVINCI_LPSC_UART1,
- DAVINCI_LPSC_UART2,
- DAVINCI_LPSC_LCDC,
- DAVINCI_LPSC_ePWM,
- DAVINCI_LPSC_eCAP,
- DAVINCI_LPSC_eQEP,
- DAVINCI_LPSC_SCR_P0,
- DAVINCI_LPSC_SCR_P1,
- DAVINCI_LPSC_CR_P3,
- DAVINCI_LPSC_L3_CBA_RAM
-};
+#define DAVINCI_LPSC_TPCC 0
+#define DAVINCI_LPSC_TPTC0 1
+#define DAVINCI_LPSC_TPTC1 2
+#define DAVINCI_LPSC_AEMIF 3
+#define DAVINCI_LPSC_SPI0 4
+#define DAVINCI_LPSC_MMC_SD 5
+#define DAVINCI_LPSC_AINTC 6
+#define DAVINCI_LPSC_ARM_RAM_ROM 7
+#define DAVINCI_LPSC_SECCTL_KEYMGR 8
+#define DAVINCI_LPSC_UART0 9
+#define DAVINCI_LPSC_SCR0 10
+#define DAVINCI_LPSC_SCR1 11
+#define DAVINCI_LPSC_SCR2 12
+#define DAVINCI_LPSC_DMAX 13
+#define DAVINCI_LPSC_ARM 14
+#define DAVINCI_LPSC_GEM 15
+
+/* for LPSCs in PSC1, offset from 32 for differentiation */
+#define DAVINCI_LPSC_PSC1_BASE 32
+#define DAVINCI_LPSC_USB20 (DAVINCI_LPSC_PSC1_BASE + 1)
+#define DAVINCI_LPSC_USB11 (DAVINCI_LPSC_PSC1_BASE + 2)
+#define DAVINCI_LPSC_GPIO (DAVINCI_LPSC_PSC1_BASE + 3)
+#define DAVINCI_LPSC_UHPI (DAVINCI_LPSC_PSC1_BASE + 4)
+#define DAVINCI_LPSC_EMAC (DAVINCI_LPSC_PSC1_BASE + 5)
+#define DAVINCI_LPSC_DDR_EMIF (DAVINCI_LPSC_PSC1_BASE + 6)
+#define DAVINCI_LPSC_McASP0 (DAVINCI_LPSC_PSC1_BASE + 7)
+#define DAVINCI_LPSC_SPI1 (DAVINCI_LPSC_PSC1_BASE + 10)
+#define DAVINCI_LPSC_I2C1 (DAVINCI_LPSC_PSC1_BASE + 11)
+#define DAVINCI_LPSC_UART1 (DAVINCI_LPSC_PSC1_BASE + 12)
+#define DAVINCI_LPSC_UART2 (DAVINCI_LPSC_PSC1_BASE + 13)
+#define DAVINCI_LPSC_LCDC (DAVINCI_LPSC_PSC1_BASE + 16)
+#define DAVINCI_LPSC_ePWM (DAVINCI_LPSC_PSC1_BASE + 17)
+#define DAVINCI_LPSC_eCAP (DAVINCI_LPSC_PSC1_BASE + 20)
+#define DAVINCI_LPSC_L3_CBA_RAM (DAVINCI_LPSC_PSC1_BASE + 31)
+
+/* DA830-specific peripherals */
+#define DAVINCI_LPSC_McASP1 (DAVINCI_LPSC_PSC1_BASE + 8)
+#define DAVINCI_LPSC_McASP2 (DAVINCI_LPSC_PSC1_BASE + 9)
+#define DAVINCI_LPSC_eQEP (DAVINCI_LPSC_PSC1_BASE + 21)
+#define DAVINCI_LPSC_SCR8 (DAVINCI_LPSC_PSC1_BASE + 24)
+#define DAVINCI_LPSC_SCR7 (DAVINCI_LPSC_PSC1_BASE + 25)
+#define DAVINCI_LPSC_SCR12 (DAVINCI_LPSC_PSC1_BASE + 26)
+
+/* DA850-specific peripherals */
+#define DAVINCI_LPSC_TPCC1 (DAVINCI_LPSC_PSC1_BASE + 0)
+#define DAVINCI_LPSC_SATA (DAVINCI_LPSC_PSC1_BASE + 8)
+#define DAVINCI_LPSC_VPIF (DAVINCI_LPSC_PSC1_BASE + 9)
+#define DAVINCI_LPSC_McBSP0 (DAVINCI_LPSC_PSC1_BASE + 14)
+#define DAVINCI_LPSC_McBSP1 (DAVINCI_LPSC_PSC1_BASE + 15)
+#define DAVINCI_LPSC_MMC_SD1 (DAVINCI_LPSC_PSC1_BASE + 18)
+#define DAVINCI_LPSC_uPP (DAVINCI_LPSC_PSC1_BASE + 19)
+#define DAVINCI_LPSC_TPTC2 (DAVINCI_LPSC_PSC1_BASE + 21)
+#define DAVINCI_LPSC_SCR_F0 (DAVINCI_LPSC_PSC1_BASE + 24)
+#define DAVINCI_LPSC_SCR_F1 (DAVINCI_LPSC_PSC1_BASE + 25)
+#define DAVINCI_LPSC_SCR_F2 (DAVINCI_LPSC_PSC1_BASE + 26)
+#define DAVINCI_LPSC_SCR_F6 (DAVINCI_LPSC_PSC1_BASE + 27)
+#define DAVINCI_LPSC_SCR_F7 (DAVINCI_LPSC_PSC1_BASE + 28)
+#define DAVINCI_LPSC_SCR_F8 (DAVINCI_LPSC_PSC1_BASE + 29)
+#define DAVINCI_LPSC_BR_F7 (DAVINCI_LPSC_PSC1_BASE + 30)
#endif /* CONFIG_SOC_DA8XX */
diff --git a/arch/arm/include/asm/arch-kirkwood/kirkwood.h b/arch/arm/include/asm/arch-kirkwood/kirkwood.h
index 0104418..3c843a0 100644
--- a/arch/arm/include/asm/arch-kirkwood/kirkwood.h
+++ b/arch/arm/include/asm/arch-kirkwood/kirkwood.h
@@ -50,6 +50,7 @@
#define KW_MPP_BASE (KW_REGISTER(0x10000))
#define KW_GPIO0_BASE (KW_REGISTER(0x10100))
#define KW_GPIO1_BASE (KW_REGISTER(0x10140))
+#define KW_RTC_BASE (KW_REGISTER(0x10300))
#define KW_NANDF_BASE (KW_REGISTER(0x10418))
#define KW_SPI_BASE (KW_REGISTER(0x10600))
#define KW_CPU_WIN_BASE (KW_REGISTER(0x20000))
diff --git a/arch/arm/include/asm/arch-mb86r0x/asm-offsets.h b/arch/arm/include/asm/arch-mb86r0x/asm-offsets.h
deleted file mode 100644
index 0bc5279..0000000
--- a/arch/arm/include/asm/arch-mb86r0x/asm-offsets.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * (C) Copyright 2010
- * Matthias Weisser <weisserm@arcor.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef ASM_OFFSETS_H
-#define ASM_OFFSETS_H
-
-/*
- * Offset definitions for DDR controller
- */
-#define DDR2_DRIC 0x00
-#define DDR2_DRIC1 0x02
-#define DDR2_DRIC2 0x04
-#define DDR2_DRCA 0x06
-#define DDR2_DRCM 0x08
-#define DDR2_DRCST1 0x0a
-#define DDR2_DRCST2 0x0c
-#define DDR2_DRCR 0x0e
-#define DDR2_DRCF 0x20
-#define DDR2_DRASR 0x30
-#define DDR2_DRIMS 0x50
-#define DDR2_DROS 0x60
-#define DDR2_DRIBSODT1 0x64
-#define DDR2_DROABA 0x70
-#define DDR2_DROBS 0x84
-
-/*
- * Offset definitions Chip Control Module
- */
-#define CCNT_CDCRC 0xec
-
-/*
- * Offset definitions clock reset generator
- */
-#define CRG_CRPR 0x00
-#define CRG_CRHA 0x18
-#define CRG_CRPA 0x1c
-#define CRG_CRPB 0x20
-#define CRG_CRHB 0x24
-#define CRG_CRAM 0x28
-
-/*
- * Offset definitions External bus interface
- */
-#define MEMC_MCFMODE0 0x00
-#define MEMC_MCFMODE2 0x08
-#define MEMC_MCFMODE4 0x10
-#define MEMC_MCFTIM0 0x20
-#define MEMC_MCFTIM2 0x28
-#define MEMC_MCFTIM4 0x30
-#define MEMC_MCFAREA0 0x40
-#define MEMC_MCFAREA2 0x48
-#define MEMC_MCFAREA4 0x50
-
-#endif /* ASM_OFFSETS_H */
diff --git a/arch/arm/include/asm/arch-mb86r0x/mb86r0x.h b/arch/arm/include/asm/arch-mb86r0x/mb86r0x.h
index 36a28b7..cb9eee5 100644
--- a/arch/arm/include/asm/arch-mb86r0x/mb86r0x.h
+++ b/arch/arm/include/asm/arch-mb86r0x/mb86r0x.h
@@ -498,6 +498,48 @@
uint32_t pad08[7*1024];
};
+/* mb86r0x ddr2c */
+struct mb86r0x_ddr2c {
+ uint16_t dric;
+ uint16_t dric1;
+ uint16_t dric2;
+ uint16_t drca;
+ uint16_t drcm;
+ uint16_t drcst1;
+ uint16_t drcst2;
+ uint16_t drcr;
+ uint16_t pad00[8];
+ uint16_t drcf;
+ uint16_t pad01[7];
+ uint16_t drasr;
+ uint16_t pad02[15];
+ uint16_t drims;
+ uint16_t pad03[7];
+ uint16_t dros;
+ uint16_t pad04;
+ uint16_t dribsodt1;
+ uint16_t dribsocd;
+ uint16_t dribsocd2;
+ uint16_t pad05[3];
+ uint16_t droaba;
+ uint16_t pad06[9];
+ uint16_t drobs;
+ uint16_t pad07[5];
+ uint16_t drimr1;
+ uint16_t drimr2;
+ uint16_t drimr3;
+ uint16_t drimr4;
+ uint16_t droisr1;
+ uint16_t droisr2;
+};
+
+/* mb86r0x memc */
+struct mb86r0x_memc {
+ uint32_t mcfmode[8];
+ uint32_t mcftim[8];
+ uint32_t mcfarea[8];
+};
+
#endif /* __ASSEMBLY__ */
/*
diff --git a/arch/arm/include/asm/arch-omap3/cpu.h b/arch/arm/include/asm/arch-omap3/cpu.h
index e944de7..08a725d 100644
--- a/arch/arm/include/asm/arch-omap3/cpu.h
+++ b/arch/arm/include/asm/arch-omap3/cpu.h
@@ -498,4 +498,30 @@
/* MUSB base */
#define MUSB_BASE (OMAP34XX_CORE_L4_IO_BASE + 0xAB000)
+/* OMAP3 GPIO registers */
+#define OMAP_GPIO_REVISION 0x0000
+#define OMAP_GPIO_SYSCONFIG 0x0010
+#define OMAP_GPIO_SYSSTATUS 0x0014
+#define OMAP_GPIO_IRQSTATUS1 0x0018
+#define OMAP_GPIO_IRQSTATUS2 0x0028
+#define OMAP_GPIO_IRQENABLE2 0x002c
+#define OMAP_GPIO_IRQENABLE1 0x001c
+#define OMAP_GPIO_WAKE_EN 0x0020
+#define OMAP_GPIO_CTRL 0x0030
+#define OMAP_GPIO_OE 0x0034
+#define OMAP_GPIO_DATAIN 0x0038
+#define OMAP_GPIO_DATAOUT 0x003c
+#define OMAP_GPIO_LEVELDETECT0 0x0040
+#define OMAP_GPIO_LEVELDETECT1 0x0044
+#define OMAP_GPIO_RISINGDETECT 0x0048
+#define OMAP_GPIO_FALLINGDETECT 0x004c
+#define OMAP_GPIO_DEBOUNCE_EN 0x0050
+#define OMAP_GPIO_DEBOUNCE_VAL 0x0054
+#define OMAP_GPIO_CLEARIRQENABLE1 0x0060
+#define OMAP_GPIO_SETIRQENABLE1 0x0064
+#define OMAP_GPIO_CLEARWKUENA 0x0080
+#define OMAP_GPIO_SETWKUENA 0x0084
+#define OMAP_GPIO_CLEARDATAOUT 0x0090
+#define OMAP_GPIO_SETDATAOUT 0x0094
+
#endif /* _CPU_H */
diff --git a/arch/arm/include/asm/arch-omap4/clocks.h b/arch/arm/include/asm/arch-omap4/clocks.h
new file mode 100644
index 0000000..374e064
--- /dev/null
+++ b/arch/arm/include/asm/arch-omap4/clocks.h
@@ -0,0 +1,690 @@
+/*
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ *
+ * Aneesh V <aneesh@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef _CLOCKS_OMAP4_H_
+#define _CLOCKS_OMAP4_H_
+#include <common.h>
+
+/*
+ * Assuming a maximum of 1.5 GHz ARM speed and a minimum of 2 cycles per
+ * loop, allow for a minimum of 2 ms wait (in reality the wait will be
+ * much more than that)
+ */
+#define LDELAY 1000000
+
+#define CM_CLKMODE_DPLL_CORE 0x4A004120
+#define CM_CLKMODE_DPLL_PER 0x4A008140
+#define CM_CLKMODE_DPLL_MPU 0x4A004160
+#define CM_CLKSEL_CORE 0x4A004100
+
+struct omap4_prcm_regs {
+ /* cm1.ckgen */
+ u32 cm_clksel_core;
+ u32 pad001[1];
+ u32 cm_clksel_abe;
+ u32 pad002[1];
+ u32 cm_dll_ctrl;
+ u32 pad003[3];
+ u32 cm_clkmode_dpll_core;
+ u32 cm_idlest_dpll_core;
+ u32 cm_autoidle_dpll_core;
+ u32 cm_clksel_dpll_core;
+ u32 cm_div_m2_dpll_core;
+ u32 cm_div_m3_dpll_core;
+ u32 cm_div_m4_dpll_core;
+ u32 cm_div_m5_dpll_core;
+ u32 cm_div_m6_dpll_core;
+ u32 cm_div_m7_dpll_core;
+ u32 cm_ssc_deltamstep_dpll_core;
+ u32 cm_ssc_modfreqdiv_dpll_core;
+ u32 cm_emu_override_dpll_core;
+ u32 pad004[3];
+ u32 cm_clkmode_dpll_mpu;
+ u32 cm_idlest_dpll_mpu;
+ u32 cm_autoidle_dpll_mpu;
+ u32 cm_clksel_dpll_mpu;
+ u32 cm_div_m2_dpll_mpu;
+ u32 pad005[5];
+ u32 cm_ssc_deltamstep_dpll_mpu;
+ u32 cm_ssc_modfreqdiv_dpll_mpu;
+ u32 pad006[3];
+ u32 cm_bypclk_dpll_mpu;
+ u32 cm_clkmode_dpll_iva;
+ u32 cm_idlest_dpll_iva;
+ u32 cm_autoidle_dpll_iva;
+ u32 cm_clksel_dpll_iva;
+ u32 pad007[2];
+ u32 cm_div_m4_dpll_iva;
+ u32 cm_div_m5_dpll_iva;
+ u32 pad008[2];
+ u32 cm_ssc_deltamstep_dpll_iva;
+ u32 cm_ssc_modfreqdiv_dpll_iva;
+ u32 pad009[3];
+ u32 cm_bypclk_dpll_iva;
+ u32 cm_clkmode_dpll_abe;
+ u32 cm_idlest_dpll_abe;
+ u32 cm_autoidle_dpll_abe;
+ u32 cm_clksel_dpll_abe;
+ u32 cm_div_m2_dpll_abe;
+ u32 cm_div_m3_dpll_abe;
+ u32 pad010[4];
+ u32 cm_ssc_deltamstep_dpll_abe;
+ u32 cm_ssc_modfreqdiv_dpll_abe;
+ u32 pad011[4];
+ u32 cm_clkmode_dpll_ddrphy;
+ u32 cm_idlest_dpll_ddrphy;
+ u32 cm_autoidle_dpll_ddrphy;
+ u32 cm_clksel_dpll_ddrphy;
+ u32 cm_div_m2_dpll_ddrphy;
+ u32 pad012[1];
+ u32 cm_div_m4_dpll_ddrphy;
+ u32 cm_div_m5_dpll_ddrphy;
+ u32 cm_div_m6_dpll_ddrphy;
+ u32 pad013[1];
+ u32 cm_ssc_deltamstep_dpll_ddrphy;
+ u32 pad014[5];
+ u32 cm_shadow_freq_config1;
+ u32 pad0141[47];
+ u32 cm_mpu_mpu_clkctrl;
+
+ /* cm1.dsp */
+ u32 pad015[55];
+ u32 cm_dsp_clkstctrl;
+ u32 pad016[7];
+ u32 cm_dsp_dsp_clkctrl;
+
+ /* cm1.abe */
+ u32 pad017[55];
+ u32 cm1_abe_clkstctrl;
+ u32 pad018[7];
+ u32 cm1_abe_l4abe_clkctrl;
+ u32 pad019[1];
+ u32 cm1_abe_aess_clkctrl;
+ u32 pad020[1];
+ u32 cm1_abe_pdm_clkctrl;
+ u32 pad021[1];
+ u32 cm1_abe_dmic_clkctrl;
+ u32 pad022[1];
+ u32 cm1_abe_mcasp_clkctrl;
+ u32 pad023[1];
+ u32 cm1_abe_mcbsp1_clkctrl;
+ u32 pad024[1];
+ u32 cm1_abe_mcbsp2_clkctrl;
+ u32 pad025[1];
+ u32 cm1_abe_mcbsp3_clkctrl;
+ u32 pad026[1];
+ u32 cm1_abe_slimbus_clkctrl;
+ u32 pad027[1];
+ u32 cm1_abe_timer5_clkctrl;
+ u32 pad028[1];
+ u32 cm1_abe_timer6_clkctrl;
+ u32 pad029[1];
+ u32 cm1_abe_timer7_clkctrl;
+ u32 pad030[1];
+ u32 cm1_abe_timer8_clkctrl;
+ u32 pad031[1];
+ u32 cm1_abe_wdt3_clkctrl;
+
+ /* cm2.ckgen */
+ u32 pad032[3805];
+ u32 cm_clksel_mpu_m3_iss_root;
+ u32 cm_clksel_usb_60mhz;
+ u32 cm_scale_fclk;
+ u32 pad033[1];
+ u32 cm_core_dvfs_perf1;
+ u32 cm_core_dvfs_perf2;
+ u32 cm_core_dvfs_perf3;
+ u32 cm_core_dvfs_perf4;
+ u32 pad034[1];
+ u32 cm_core_dvfs_current;
+ u32 cm_iva_dvfs_perf_tesla;
+ u32 cm_iva_dvfs_perf_ivahd;
+ u32 cm_iva_dvfs_perf_abe;
+ u32 pad035[1];
+ u32 cm_iva_dvfs_current;
+ u32 pad036[1];
+ u32 cm_clkmode_dpll_per;
+ u32 cm_idlest_dpll_per;
+ u32 cm_autoidle_dpll_per;
+ u32 cm_clksel_dpll_per;
+ u32 cm_div_m2_dpll_per;
+ u32 cm_div_m3_dpll_per;
+ u32 cm_div_m4_dpll_per;
+ u32 cm_div_m5_dpll_per;
+ u32 cm_div_m6_dpll_per;
+ u32 cm_div_m7_dpll_per;
+ u32 cm_ssc_deltamstep_dpll_per;
+ u32 cm_ssc_modfreqdiv_dpll_per;
+ u32 cm_emu_override_dpll_per;
+ u32 pad037[3];
+ u32 cm_clkmode_dpll_usb;
+ u32 cm_idlest_dpll_usb;
+ u32 cm_autoidle_dpll_usb;
+ u32 cm_clksel_dpll_usb;
+ u32 cm_div_m2_dpll_usb;
+ u32 pad038[5];
+ u32 cm_ssc_deltamstep_dpll_usb;
+ u32 cm_ssc_modfreqdiv_dpll_usb;
+ u32 pad039[1];
+ u32 cm_clkdcoldo_dpll_usb;
+ u32 pad040[2];
+ u32 cm_clkmode_dpll_unipro;
+ u32 cm_idlest_dpll_unipro;
+ u32 cm_autoidle_dpll_unipro;
+ u32 cm_clksel_dpll_unipro;
+ u32 cm_div_m2_dpll_unipro;
+ u32 pad041[5];
+ u32 cm_ssc_deltamstep_dpll_unipro;
+ u32 cm_ssc_modfreqdiv_dpll_unipro;
+
+ /* cm2.core */
+ u32 pad0411[324];
+ u32 cm_l3_1_clkstctrl;
+ u32 pad042[1];
+ u32 cm_l3_1_dynamicdep;
+ u32 pad043[5];
+ u32 cm_l3_1_l3_1_clkctrl;
+ u32 pad044[55];
+ u32 cm_l3_2_clkstctrl;
+ u32 pad045[1];
+ u32 cm_l3_2_dynamicdep;
+ u32 pad046[5];
+ u32 cm_l3_2_l3_2_clkctrl;
+ u32 pad047[1];
+ u32 cm_l3_2_gpmc_clkctrl;
+ u32 pad048[1];
+ u32 cm_l3_2_ocmc_ram_clkctrl;
+ u32 pad049[51];
+ u32 cm_mpu_m3_clkstctrl;
+ u32 cm_mpu_m3_staticdep;
+ u32 cm_mpu_m3_dynamicdep;
+ u32 pad050[5];
+ u32 cm_mpu_m3_mpu_m3_clkctrl;
+ u32 pad051[55];
+ u32 cm_sdma_clkstctrl;
+ u32 cm_sdma_staticdep;
+ u32 cm_sdma_dynamicdep;
+ u32 pad052[5];
+ u32 cm_sdma_sdma_clkctrl;
+ u32 pad053[55];
+ u32 cm_memif_clkstctrl;
+ u32 pad054[7];
+ u32 cm_memif_dmm_clkctrl;
+ u32 pad055[1];
+ u32 cm_memif_emif_fw_clkctrl;
+ u32 pad056[1];
+ u32 cm_memif_emif_1_clkctrl;
+ u32 pad057[1];
+ u32 cm_memif_emif_2_clkctrl;
+ u32 pad058[1];
+ u32 cm_memif_dll_clkctrl;
+ u32 pad059[3];
+ u32 cm_memif_emif_h1_clkctrl;
+ u32 pad060[1];
+ u32 cm_memif_emif_h2_clkctrl;
+ u32 pad061[1];
+ u32 cm_memif_dll_h_clkctrl;
+ u32 pad062[39];
+ u32 cm_c2c_clkstctrl;
+ u32 cm_c2c_staticdep;
+ u32 cm_c2c_dynamicdep;
+ u32 pad063[5];
+ u32 cm_c2c_sad2d_clkctrl;
+ u32 pad064[1];
+ u32 cm_c2c_modem_icr_clkctrl;
+ u32 pad065[1];
+ u32 cm_c2c_sad2d_fw_clkctrl;
+ u32 pad066[51];
+ u32 cm_l4cfg_clkstctrl;
+ u32 pad067[1];
+ u32 cm_l4cfg_dynamicdep;
+ u32 pad068[5];
+ u32 cm_l4cfg_l4_cfg_clkctrl;
+ u32 pad069[1];
+ u32 cm_l4cfg_hw_sem_clkctrl;
+ u32 pad070[1];
+ u32 cm_l4cfg_mailbox_clkctrl;
+ u32 pad071[1];
+ u32 cm_l4cfg_sar_rom_clkctrl;
+ u32 pad072[49];
+ u32 cm_l3instr_clkstctrl;
+ u32 pad073[7];
+ u32 cm_l3instr_l3_3_clkctrl;
+ u32 pad074[1];
+ u32 cm_l3instr_l3_instr_clkctrl;
+ u32 pad075[5];
+ u32 cm_l3instr_intrconn_wp1_clkctrl;
+
+
+ /* cm2.ivahd */
+ u32 pad076[47];
+ u32 cm_ivahd_clkstctrl;
+ u32 pad077[7];
+ u32 cm_ivahd_ivahd_clkctrl;
+ u32 pad078[1];
+ u32 cm_ivahd_sl2_clkctrl;
+
+ /* cm2.cam */
+ u32 pad079[53];
+ u32 cm_cam_clkstctrl;
+ u32 pad080[7];
+ u32 cm_cam_iss_clkctrl;
+ u32 pad081[1];
+ u32 cm_cam_fdif_clkctrl;
+
+ /* cm2.dss */
+ u32 pad082[53];
+ u32 cm_dss_clkstctrl;
+ u32 pad083[7];
+ u32 cm_dss_dss_clkctrl;
+
+ /* cm2.sgx */
+ u32 pad084[55];
+ u32 cm_sgx_clkstctrl;
+ u32 pad085[7];
+ u32 cm_sgx_sgx_clkctrl;
+
+ /* cm2.l3init */
+ u32 pad086[55];
+ u32 cm_l3init_clkstctrl;
+
+ /* cm2.l3init */
+ u32 pad087[9];
+ u32 cm_l3init_hsmmc1_clkctrl;
+ u32 pad088[1];
+ u32 cm_l3init_hsmmc2_clkctrl;
+ u32 pad089[1];
+ u32 cm_l3init_hsi_clkctrl;
+ u32 pad090[7];
+ u32 cm_l3init_hsusbhost_clkctrl;
+ u32 pad091[1];
+ u32 cm_l3init_hsusbotg_clkctrl;
+ u32 pad092[1];
+ u32 cm_l3init_hsusbtll_clkctrl;
+ u32 pad093[3];
+ u32 cm_l3init_p1500_clkctrl;
+ u32 pad094[21];
+ u32 cm_l3init_fsusb_clkctrl;
+ u32 pad095[3];
+ u32 cm_l3init_usbphy_clkctrl;
+
+ /* cm2.l4per */
+ u32 pad096[7];
+ u32 cm_l4per_clkstctrl;
+ u32 pad097[1];
+ u32 cm_l4per_dynamicdep;
+ u32 pad098[5];
+ u32 cm_l4per_adc_clkctrl;
+ u32 pad100[1];
+ u32 cm_l4per_gptimer10_clkctrl;
+ u32 pad101[1];
+ u32 cm_l4per_gptimer11_clkctrl;
+ u32 pad102[1];
+ u32 cm_l4per_gptimer2_clkctrl;
+ u32 pad103[1];
+ u32 cm_l4per_gptimer3_clkctrl;
+ u32 pad104[1];
+ u32 cm_l4per_gptimer4_clkctrl;
+ u32 pad105[1];
+ u32 cm_l4per_gptimer9_clkctrl;
+ u32 pad106[1];
+ u32 cm_l4per_elm_clkctrl;
+ u32 pad107[1];
+ u32 cm_l4per_gpio2_clkctrl;
+ u32 pad108[1];
+ u32 cm_l4per_gpio3_clkctrl;
+ u32 pad109[1];
+ u32 cm_l4per_gpio4_clkctrl;
+ u32 pad110[1];
+ u32 cm_l4per_gpio5_clkctrl;
+ u32 pad111[1];
+ u32 cm_l4per_gpio6_clkctrl;
+ u32 pad112[1];
+ u32 cm_l4per_hdq1w_clkctrl;
+ u32 pad113[1];
+ u32 cm_l4per_hecc1_clkctrl;
+ u32 pad114[1];
+ u32 cm_l4per_hecc2_clkctrl;
+ u32 pad115[1];
+ u32 cm_l4per_i2c1_clkctrl;
+ u32 pad116[1];
+ u32 cm_l4per_i2c2_clkctrl;
+ u32 pad117[1];
+ u32 cm_l4per_i2c3_clkctrl;
+ u32 pad118[1];
+ u32 cm_l4per_i2c4_clkctrl;
+ u32 pad119[1];
+ u32 cm_l4per_l4per_clkctrl;
+ u32 pad1191[3];
+ u32 cm_l4per_mcasp2_clkctrl;
+ u32 pad120[1];
+ u32 cm_l4per_mcasp3_clkctrl;
+ u32 pad121[1];
+ u32 cm_l4per_mcbsp4_clkctrl;
+ u32 pad122[1];
+ u32 cm_l4per_mgate_clkctrl;
+ u32 pad123[1];
+ u32 cm_l4per_mcspi1_clkctrl;
+ u32 pad124[1];
+ u32 cm_l4per_mcspi2_clkctrl;
+ u32 pad125[1];
+ u32 cm_l4per_mcspi3_clkctrl;
+ u32 pad126[1];
+ u32 cm_l4per_mcspi4_clkctrl;
+ u32 pad127[5];
+ u32 cm_l4per_mmcsd3_clkctrl;
+ u32 pad128[1];
+ u32 cm_l4per_mmcsd4_clkctrl;
+ u32 pad129[1];
+ u32 cm_l4per_msprohg_clkctrl;
+ u32 pad130[1];
+ u32 cm_l4per_slimbus2_clkctrl;
+ u32 pad131[1];
+ u32 cm_l4per_uart1_clkctrl;
+ u32 pad132[1];
+ u32 cm_l4per_uart2_clkctrl;
+ u32 pad133[1];
+ u32 cm_l4per_uart3_clkctrl;
+ u32 pad134[1];
+ u32 cm_l4per_uart4_clkctrl;
+ u32 pad135[1];
+ u32 cm_l4per_mmcsd5_clkctrl;
+ u32 pad136[1];
+ u32 cm_l4per_i2c5_clkctrl;
+ u32 pad137[5];
+ u32 cm_l4sec_clkstctrl;
+ u32 cm_l4sec_staticdep;
+ u32 cm_l4sec_dynamicdep;
+ u32 pad138[5];
+ u32 cm_l4sec_aes1_clkctrl;
+ u32 pad139[1];
+ u32 cm_l4sec_aes2_clkctrl;
+ u32 pad140[1];
+ u32 cm_l4sec_des3des_clkctrl;
+ u32 pad141[1];
+ u32 cm_l4sec_pkaeip29_clkctrl;
+ u32 pad142[1];
+ u32 cm_l4sec_rng_clkctrl;
+ u32 pad143[1];
+ u32 cm_l4sec_sha2md51_clkctrl;
+ u32 pad144[3];
+ u32 cm_l4sec_cryptodma_clkctrl;
+ u32 pad145[776841];
+
+ /* l4 wkup regs */
+ u32 pad201[6211];
+ u32 cm_abe_pll_ref_clksel;
+ u32 cm_sys_clksel;
+ u32 pad202[1467];
+ u32 cm_wkup_clkstctrl;
+ u32 pad203[7];
+ u32 cm_wkup_l4wkup_clkctrl;
+ u32 pad204;
+ u32 cm_wkup_wdtimer1_clkctrl;
+ u32 pad205;
+ u32 cm_wkup_wdtimer2_clkctrl;
+ u32 pad206;
+ u32 cm_wkup_gpio1_clkctrl;
+ u32 pad207;
+ u32 cm_wkup_gptimer1_clkctrl;
+ u32 pad208;
+ u32 cm_wkup_gptimer12_clkctrl;
+ u32 pad209;
+ u32 cm_wkup_synctimer_clkctrl;
+ u32 pad210;
+ u32 cm_wkup_usim_clkctrl;
+ u32 pad211;
+ u32 cm_wkup_sarram_clkctrl;
+ u32 pad212[5];
+ u32 cm_wkup_keyboard_clkctrl;
+ u32 pad213;
+ u32 cm_wkup_rtc_clkctrl;
+ u32 pad214;
+ u32 cm_wkup_bandgap_clkctrl;
+ u32 pad215[197];
+ u32 prm_vc_val_bypass;
+ u32 prm_vc_cfg_channel;
+ u32 prm_vc_cfg_i2c_mode;
+ u32 prm_vc_cfg_i2c_clk;
+
+};
+
+/* DPLL register offsets */
+#define CM_CLKMODE_DPLL 0
+#define CM_IDLEST_DPLL 0x4
+#define CM_AUTOIDLE_DPLL 0x8
+#define CM_CLKSEL_DPLL 0xC
+#define CM_DIV_M2_DPLL 0x10
+#define CM_DIV_M3_DPLL 0x14
+#define CM_DIV_M4_DPLL 0x18
+#define CM_DIV_M5_DPLL 0x1C
+#define CM_DIV_M6_DPLL 0x20
+#define CM_DIV_M7_DPLL 0x24
+
+#define DPLL_CLKOUT_DIV_MASK 0x1F /* post-divider mask */
+
+/* CM_CLKMODE_DPLL */
+#define CM_CLKMODE_DPLL_REGM4XEN_SHIFT 11
+#define CM_CLKMODE_DPLL_REGM4XEN_MASK (1 << 11)
+#define CM_CLKMODE_DPLL_LPMODE_EN_SHIFT 10
+#define CM_CLKMODE_DPLL_LPMODE_EN_MASK (1 << 10)
+#define CM_CLKMODE_DPLL_RELOCK_RAMP_EN_SHIFT 9
+#define CM_CLKMODE_DPLL_RELOCK_RAMP_EN_MASK (1 << 9)
+#define CM_CLKMODE_DPLL_DRIFTGUARD_EN_SHIFT 8
+#define CM_CLKMODE_DPLL_DRIFTGUARD_EN_MASK (1 << 8)
+#define CM_CLKMODE_DPLL_RAMP_RATE_SHIFT 5
+#define CM_CLKMODE_DPLL_RAMP_RATE_MASK (0x7 << 5)
+#define CM_CLKMODE_DPLL_EN_SHIFT 0
+#define CM_CLKMODE_DPLL_EN_MASK (0x7 << 0)
+
+#define CM_CLKMODE_DPLL_DPLL_EN_SHIFT 0
+#define CM_CLKMODE_DPLL_DPLL_EN_MASK 7
+
+#define DPLL_EN_STOP 1
+#define DPLL_EN_MN_BYPASS 4
+#define DPLL_EN_LOW_POWER_BYPASS 5
+#define DPLL_EN_FAST_RELOCK_BYPASS 6
+#define DPLL_EN_LOCK 7
+
+/* CM_IDLEST_DPLL fields */
+#define ST_DPLL_CLK_MASK 1
+
+/* CM_CLKSEL_DPLL */
+#define CM_CLKSEL_DPLL_DPLL_SD_DIV_SHIFT 24
+#define CM_CLKSEL_DPLL_DPLL_SD_DIV_MASK (0xFF << 24)
+#define CM_CLKSEL_DPLL_M_SHIFT 8
+#define CM_CLKSEL_DPLL_M_MASK (0x7FF << 8)
+#define CM_CLKSEL_DPLL_N_SHIFT 0
+#define CM_CLKSEL_DPLL_N_MASK 0x7F
+#define CM_CLKSEL_DCC_EN_SHIFT 22
+#define CM_CLKSEL_DCC_EN_MASK (1 << 22)
+
+#define OMAP4_DPLL_MAX_N 127
+
+/* CM_SYS_CLKSEL */
+#define CM_SYS_CLKSEL_SYS_CLKSEL_MASK 7
+
+/* CM_CLKSEL_CORE */
+#define CLKSEL_CORE_SHIFT 0
+#define CLKSEL_L3_SHIFT 4
+#define CLKSEL_L4_SHIFT 8
+
+#define CLKSEL_CORE_X2_DIV_1 0
+#define CLKSEL_L3_CORE_DIV_2 1
+#define CLKSEL_L4_L3_DIV_2 1
+
+/* CM_ABE_PLL_REF_CLKSEL */
+#define CM_ABE_PLL_REF_CLKSEL_CLKSEL_SHIFT 0
+#define CM_ABE_PLL_REF_CLKSEL_CLKSEL_MASK 1
+#define CM_ABE_PLL_REF_CLKSEL_CLKSEL_SYSCLK 0
+#define CM_ABE_PLL_REF_CLKSEL_CLKSEL_32KCLK 1
+
+/* CM_BYPCLK_DPLL_IVA */
+#define CM_BYPCLK_DPLL_IVA_CLKSEL_SHIFT 0
+#define CM_BYPCLK_DPLL_IVA_CLKSEL_MASK 3
+
+#define DPLL_IVA_CLKSEL_CORE_X2_DIV_2 1
+
+/* CM_SHADOW_FREQ_CONFIG1 */
+#define SHADOW_FREQ_CONFIG1_FREQ_UPDATE_MASK 1
+#define SHADOW_FREQ_CONFIG1_DLL_OVERRIDE_MASK 4
+#define SHADOW_FREQ_CONFIG1_DLL_RESET_MASK 8
+
+#define SHADOW_FREQ_CONFIG1_DPLL_EN_SHIFT 8
+#define SHADOW_FREQ_CONFIG1_DPLL_EN_MASK (7 << 8)
+
+#define SHADOW_FREQ_CONFIG1_M2_DIV_SHIFT 11
+#define SHADOW_FREQ_CONFIG1_M2_DIV_MASK (0x1F << 11)
+
+/*CM_<clock_domain>__CLKCTRL */
+#define CD_CLKCTRL_CLKTRCTRL_SHIFT 0
+#define CD_CLKCTRL_CLKTRCTRL_MASK 3
+
+#define CD_CLKCTRL_CLKTRCTRL_NO_SLEEP 0
+#define CD_CLKCTRL_CLKTRCTRL_SW_SLEEP 1
+#define CD_CLKCTRL_CLKTRCTRL_SW_WKUP 2
+#define CD_CLKCTRL_CLKTRCTRL_HW_AUTO 3
+
+
+/* CM_<clock_domain>_<module>_CLKCTRL */
+#define MODULE_CLKCTRL_MODULEMODE_SHIFT 0
+#define MODULE_CLKCTRL_MODULEMODE_MASK 3
+#define MODULE_CLKCTRL_IDLEST_SHIFT 16
+#define MODULE_CLKCTRL_IDLEST_MASK (3 << 16)
+
+#define MODULE_CLKCTRL_MODULEMODE_SW_DISABLE 0
+#define MODULE_CLKCTRL_MODULEMODE_HW_AUTO 1
+#define MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN 2
+
+#define MODULE_CLKCTRL_IDLEST_FULLY_FUNCTIONAL 0
+#define MODULE_CLKCTRL_IDLEST_TRANSITIONING 1
+#define MODULE_CLKCTRL_IDLEST_IDLE 2
+#define MODULE_CLKCTRL_IDLEST_DISABLED 3
+
+/* CM_L4PER_GPIO4_CLKCTRL */
+#define GPIO4_CLKCTRL_OPTFCLKEN_MASK (1 << 8)
+
+/* CM_L3INIT_HSMMCn_CLKCTRL */
+#define HSMMC_CLKCTRL_CLKSEL_MASK (1 << 24)
+
+/* CM_WKUP_GPTIMER1_CLKCTRL */
+#define GPTIMER1_CLKCTRL_CLKSEL_MASK (1 << 24)
+
+/* CM_CAM_ISS_CLKCTRL */
+#define ISS_CLKCTRL_OPTFCLKEN_MASK (1 << 8)
+
+/* CM_DSS_DSS_CLKCTRL */
+#define DSS_CLKCTRL_OPTFCLKEN_MASK 0xF00
+
+/* CM_L3INIT_USBPHY_CLKCTRL */
+#define USBPHY_CLKCTRL_OPTFCLKEN_PHY_48M_MASK 8
+
+/* CM_MPU_MPU_CLKCTRL */
+#define MPU_CLKCTRL_CLKSEL_EMIF_DIV_MODE_SHIFT 24
+#define MPU_CLKCTRL_CLKSEL_EMIF_DIV_MODE_MASK (1 << 24)
+#define MPU_CLKCTRL_CLKSEL_ABE_DIV_MODE_SHIFT 25
+#define MPU_CLKCTRL_CLKSEL_ABE_DIV_MODE_MASK (1 << 25)
+
+/* Clock frequencies */
+#define OMAP_SYS_CLK_FREQ_38_4_MHZ 38400000
+#define OMAP_SYS_CLK_IND_38_4_MHZ 6
+#define OMAP_32K_CLK_FREQ 32768
+
+/* PRM_VC_CFG_I2C_CLK */
+#define PRM_VC_CFG_I2C_CLK_SCLH_SHIFT 0
+#define PRM_VC_CFG_I2C_CLK_SCLH_MASK 0xFF
+#define PRM_VC_CFG_I2C_CLK_SCLL_SHIFT 8
+#define PRM_VC_CFG_I2C_CLK_SCLL_MASK (0xFF << 8)
+
+/* PRM_VC_VAL_BYPASS */
+#define PRM_VC_I2C_CHANNEL_FREQ_KHZ 400
+
+#define PRM_VC_VAL_BYPASS_VALID_BIT 0x1000000
+#define PRM_VC_VAL_BYPASS_SLAVEADDR_SHIFT 0
+#define PRM_VC_VAL_BYPASS_SLAVEADDR_MASK 0x7F
+#define PRM_VC_VAL_BYPASS_REGADDR_SHIFT 8
+#define PRM_VC_VAL_BYPASS_REGADDR_MASK 0xFF
+#define PRM_VC_VAL_BYPASS_DATA_SHIFT 16
+#define PRM_VC_VAL_BYPASS_DATA_MASK 0xFF
+
+/* SMPS */
+#define SMPS_I2C_SLAVE_ADDR 0x12
+#define SMPS_REG_ADDR_VCORE1 0x55
+#define SMPS_REG_ADDR_VCORE2 0x5B
+#define SMPS_REG_ADDR_VCORE3 0x61
+
+#define PHOENIX_SMPS_BASE_VOLT_STD_MODE_UV 607700
+#define PHOENIX_SMPS_BASE_VOLT_STD_MODE_WITH_OFFSET_UV 709000
+
+/* TPS */
+#define TPS62361_I2C_SLAVE_ADDR 0x60
+#define TPS62361_REG_ADDR_SET0 0x0
+#define TPS62361_REG_ADDR_SET1 0x1
+#define TPS62361_REG_ADDR_SET2 0x2
+#define TPS62361_REG_ADDR_SET3 0x3
+#define TPS62361_REG_ADDR_CTRL 0x4
+#define TPS62361_REG_ADDR_TEMP 0x5
+#define TPS62361_REG_ADDR_RMP_CTRL 0x6
+#define TPS62361_REG_ADDR_CHIP_ID 0x8
+#define TPS62361_REG_ADDR_CHIP_ID_2 0x9
+
+#define TPS62361_BASE_VOLT_MV 500
+#define TPS62361_VSEL0_GPIO 7
+
+/* Defines for DPLL setup */
+#define DPLL_LOCKED_FREQ_TOLERANCE_0 0
+#define DPLL_LOCKED_FREQ_TOLERANCE_500_KHZ 500
+#define DPLL_LOCKED_FREQ_TOLERANCE_1_MHZ 1000
+
+#define DPLL_NO_LOCK 0
+#define DPLL_LOCK 1
+
+#define NUM_SYS_CLKS 7
+
+struct dpll_regs {
+ u32 cm_clkmode_dpll;
+ u32 cm_idlest_dpll;
+ u32 cm_autoidle_dpll;
+ u32 cm_clksel_dpll;
+ u32 cm_div_m2_dpll;
+ u32 cm_div_m3_dpll;
+ u32 cm_div_m4_dpll;
+ u32 cm_div_m5_dpll;
+ u32 cm_div_m6_dpll;
+ u32 cm_div_m7_dpll;
+};
+
+/* DPLL parameter table */
+struct dpll_params {
+ u32 m;
+ u32 n;
+ u8 m2;
+ u8 m3;
+ u8 m4;
+ u8 m5;
+ u8 m6;
+ u8 m7;
+};
+
+#endif /* _CLOCKS_OMAP4_H_ */
diff --git a/arch/arm/include/asm/arch-omap4/cpu.h b/arch/arm/include/asm/arch-omap4/cpu.h
index 7d5748a..08b9c99 100644
--- a/arch/arm/include/asm/arch-omap4/cpu.h
+++ b/arch/arm/include/asm/arch-omap4/cpu.h
@@ -142,4 +142,30 @@
/* MUSB base */
#define MUSB_BASE (OMAP44XX_L4_CORE_BASE + 0xAB000)
+/* OMAP4 GPIO registers */
+#define OMAP_GPIO_REVISION 0x0000
+#define OMAP_GPIO_SYSCONFIG 0x0010
+#define OMAP_GPIO_SYSSTATUS 0x0114
+#define OMAP_GPIO_IRQSTATUS1 0x0118
+#define OMAP_GPIO_IRQSTATUS2 0x0128
+#define OMAP_GPIO_IRQENABLE2 0x012c
+#define OMAP_GPIO_IRQENABLE1 0x011c
+#define OMAP_GPIO_WAKE_EN 0x0120
+#define OMAP_GPIO_CTRL 0x0130
+#define OMAP_GPIO_OE 0x0134
+#define OMAP_GPIO_DATAIN 0x0138
+#define OMAP_GPIO_DATAOUT 0x013c
+#define OMAP_GPIO_LEVELDETECT0 0x0140
+#define OMAP_GPIO_LEVELDETECT1 0x0144
+#define OMAP_GPIO_RISINGDETECT 0x0148
+#define OMAP_GPIO_FALLINGDETECT 0x014c
+#define OMAP_GPIO_DEBOUNCE_EN 0x0150
+#define OMAP_GPIO_DEBOUNCE_VAL 0x0154
+#define OMAP_GPIO_CLEARIRQENABLE1 0x0160
+#define OMAP_GPIO_SETIRQENABLE1 0x0164
+#define OMAP_GPIO_CLEARWKUENA 0x0180
+#define OMAP_GPIO_SETWKUENA 0x0184
+#define OMAP_GPIO_CLEARDATAOUT 0x0190
+#define OMAP_GPIO_SETDATAOUT 0x0194
+
#endif /* _CPU_H */
diff --git a/arch/arm/include/asm/arch-omap4/emif.h b/arch/arm/include/asm/arch-omap4/emif.h
new file mode 100644
index 0000000..37ad1fd
--- /dev/null
+++ b/arch/arm/include/asm/arch-omap4/emif.h
@@ -0,0 +1,1040 @@
+/*
+ * OMAP44xx EMIF header
+ *
+ * Copyright (C) 2009-2010 Texas Instruments, Inc.
+ *
+ * Aneesh V <aneesh@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _EMIF_H_
+#define _EMIF_H_
+#include <asm/types.h>
+#include <common.h>
+
+/* Base address */
+#define OMAP44XX_EMIF1 0x4c000000
+#define OMAP44XX_EMIF2 0x4d000000
+
+/* Registers shifts and masks */
+
+/* EMIF_MOD_ID_REV */
+#define OMAP44XX_REG_SCHEME_SHIFT 30
+#define OMAP44XX_REG_SCHEME_MASK (0x3 << 30)
+#define OMAP44XX_REG_MODULE_ID_SHIFT 16
+#define OMAP44XX_REG_MODULE_ID_MASK (0xfff << 16)
+#define OMAP44XX_REG_RTL_VERSION_SHIFT 11
+#define OMAP44XX_REG_RTL_VERSION_MASK (0x1f << 11)
+#define OMAP44XX_REG_MAJOR_REVISION_SHIFT 8
+#define OMAP44XX_REG_MAJOR_REVISION_MASK (0x7 << 8)
+#define OMAP44XX_REG_MINOR_REVISION_SHIFT 0
+#define OMAP44XX_REG_MINOR_REVISION_MASK (0x3f << 0)
+
+/* STATUS */
+#define OMAP44XX_REG_BE_SHIFT 31
+#define OMAP44XX_REG_BE_MASK (1 << 31)
+#define OMAP44XX_REG_DUAL_CLK_MODE_SHIFT 30
+#define OMAP44XX_REG_DUAL_CLK_MODE_MASK (1 << 30)
+#define OMAP44XX_REG_FAST_INIT_SHIFT 29
+#define OMAP44XX_REG_FAST_INIT_MASK (1 << 29)
+#define OMAP44XX_REG_PHY_DLL_READY_SHIFT 2
+#define OMAP44XX_REG_PHY_DLL_READY_MASK (1 << 2)
+
+/* SDRAM_CONFIG */
+#define OMAP44XX_REG_SDRAM_TYPE_SHIFT 29
+#define OMAP44XX_REG_SDRAM_TYPE_MASK (0x7 << 29)
+#define OMAP44XX_REG_IBANK_POS_SHIFT 27
+#define OMAP44XX_REG_IBANK_POS_MASK (0x3 << 27)
+#define OMAP44XX_REG_DDR_TERM_SHIFT 24
+#define OMAP44XX_REG_DDR_TERM_MASK (0x7 << 24)
+#define OMAP44XX_REG_DDR2_DDQS_SHIFT 23
+#define OMAP44XX_REG_DDR2_DDQS_MASK (1 << 23)
+#define OMAP44XX_REG_DYN_ODT_SHIFT 21
+#define OMAP44XX_REG_DYN_ODT_MASK (0x3 << 21)
+#define OMAP44XX_REG_DDR_DISABLE_DLL_SHIFT 20
+#define OMAP44XX_REG_DDR_DISABLE_DLL_MASK (1 << 20)
+#define OMAP44XX_REG_SDRAM_DRIVE_SHIFT 18
+#define OMAP44XX_REG_SDRAM_DRIVE_MASK (0x3 << 18)
+#define OMAP44XX_REG_CWL_SHIFT 16
+#define OMAP44XX_REG_CWL_MASK (0x3 << 16)
+#define OMAP44XX_REG_NARROW_MODE_SHIFT 14
+#define OMAP44XX_REG_NARROW_MODE_MASK (0x3 << 14)
+#define OMAP44XX_REG_CL_SHIFT 10
+#define OMAP44XX_REG_CL_MASK (0xf << 10)
+#define OMAP44XX_REG_ROWSIZE_SHIFT 7
+#define OMAP44XX_REG_ROWSIZE_MASK (0x7 << 7)
+#define OMAP44XX_REG_IBANK_SHIFT 4
+#define OMAP44XX_REG_IBANK_MASK (0x7 << 4)
+#define OMAP44XX_REG_EBANK_SHIFT 3
+#define OMAP44XX_REG_EBANK_MASK (1 << 3)
+#define OMAP44XX_REG_PAGESIZE_SHIFT 0
+#define OMAP44XX_REG_PAGESIZE_MASK (0x7 << 0)
+
+/* SDRAM_CONFIG_2 */
+#define OMAP44XX_REG_CS1NVMEN_SHIFT 30
+#define OMAP44XX_REG_CS1NVMEN_MASK (1 << 30)
+#define OMAP44XX_REG_EBANK_POS_SHIFT 27
+#define OMAP44XX_REG_EBANK_POS_MASK (1 << 27)
+#define OMAP44XX_REG_RDBNUM_SHIFT 4
+#define OMAP44XX_REG_RDBNUM_MASK (0x3 << 4)
+#define OMAP44XX_REG_RDBSIZE_SHIFT 0
+#define OMAP44XX_REG_RDBSIZE_MASK (0x7 << 0)
+
+/* SDRAM_REF_CTRL */
+#define OMAP44XX_REG_INITREF_DIS_SHIFT 31
+#define OMAP44XX_REG_INITREF_DIS_MASK (1 << 31)
+#define OMAP44XX_REG_SRT_SHIFT 29
+#define OMAP44XX_REG_SRT_MASK (1 << 29)
+#define OMAP44XX_REG_ASR_SHIFT 28
+#define OMAP44XX_REG_ASR_MASK (1 << 28)
+#define OMAP44XX_REG_PASR_SHIFT 24
+#define OMAP44XX_REG_PASR_MASK (0x7 << 24)
+#define OMAP44XX_REG_REFRESH_RATE_SHIFT 0
+#define OMAP44XX_REG_REFRESH_RATE_MASK (0xffff << 0)
+
+/* SDRAM_REF_CTRL_SHDW */
+#define OMAP44XX_REG_REFRESH_RATE_SHDW_SHIFT 0
+#define OMAP44XX_REG_REFRESH_RATE_SHDW_MASK (0xffff << 0)
+
+/* SDRAM_TIM_1 */
+#define OMAP44XX_REG_T_RP_SHIFT 25
+#define OMAP44XX_REG_T_RP_MASK (0xf << 25)
+#define OMAP44XX_REG_T_RCD_SHIFT 21
+#define OMAP44XX_REG_T_RCD_MASK (0xf << 21)
+#define OMAP44XX_REG_T_WR_SHIFT 17
+#define OMAP44XX_REG_T_WR_MASK (0xf << 17)
+#define OMAP44XX_REG_T_RAS_SHIFT 12
+#define OMAP44XX_REG_T_RAS_MASK (0x1f << 12)
+#define OMAP44XX_REG_T_RC_SHIFT 6
+#define OMAP44XX_REG_T_RC_MASK (0x3f << 6)
+#define OMAP44XX_REG_T_RRD_SHIFT 3
+#define OMAP44XX_REG_T_RRD_MASK (0x7 << 3)
+#define OMAP44XX_REG_T_WTR_SHIFT 0
+#define OMAP44XX_REG_T_WTR_MASK (0x7 << 0)
+
+/* SDRAM_TIM_1_SHDW */
+#define OMAP44XX_REG_T_RP_SHDW_SHIFT 25
+#define OMAP44XX_REG_T_RP_SHDW_MASK (0xf << 25)
+#define OMAP44XX_REG_T_RCD_SHDW_SHIFT 21
+#define OMAP44XX_REG_T_RCD_SHDW_MASK (0xf << 21)
+#define OMAP44XX_REG_T_WR_SHDW_SHIFT 17
+#define OMAP44XX_REG_T_WR_SHDW_MASK (0xf << 17)
+#define OMAP44XX_REG_T_RAS_SHDW_SHIFT 12
+#define OMAP44XX_REG_T_RAS_SHDW_MASK (0x1f << 12)
+#define OMAP44XX_REG_T_RC_SHDW_SHIFT 6
+#define OMAP44XX_REG_T_RC_SHDW_MASK (0x3f << 6)
+#define OMAP44XX_REG_T_RRD_SHDW_SHIFT 3
+#define OMAP44XX_REG_T_RRD_SHDW_MASK (0x7 << 3)
+#define OMAP44XX_REG_T_WTR_SHDW_SHIFT 0
+#define OMAP44XX_REG_T_WTR_SHDW_MASK (0x7 << 0)
+
+/* SDRAM_TIM_2 */
+#define OMAP44XX_REG_T_XP_SHIFT 28
+#define OMAP44XX_REG_T_XP_MASK (0x7 << 28)
+#define OMAP44XX_REG_T_ODT_SHIFT 25
+#define OMAP44XX_REG_T_ODT_MASK (0x7 << 25)
+#define OMAP44XX_REG_T_XSNR_SHIFT 16
+#define OMAP44XX_REG_T_XSNR_MASK (0x1ff << 16)
+#define OMAP44XX_REG_T_XSRD_SHIFT 6
+#define OMAP44XX_REG_T_XSRD_MASK (0x3ff << 6)
+#define OMAP44XX_REG_T_RTP_SHIFT 3
+#define OMAP44XX_REG_T_RTP_MASK (0x7 << 3)
+#define OMAP44XX_REG_T_CKE_SHIFT 0
+#define OMAP44XX_REG_T_CKE_MASK (0x7 << 0)
+
+/* SDRAM_TIM_2_SHDW */
+#define OMAP44XX_REG_T_XP_SHDW_SHIFT 28
+#define OMAP44XX_REG_T_XP_SHDW_MASK (0x7 << 28)
+#define OMAP44XX_REG_T_ODT_SHDW_SHIFT 25
+#define OMAP44XX_REG_T_ODT_SHDW_MASK (0x7 << 25)
+#define OMAP44XX_REG_T_XSNR_SHDW_SHIFT 16
+#define OMAP44XX_REG_T_XSNR_SHDW_MASK (0x1ff << 16)
+#define OMAP44XX_REG_T_XSRD_SHDW_SHIFT 6
+#define OMAP44XX_REG_T_XSRD_SHDW_MASK (0x3ff << 6)
+#define OMAP44XX_REG_T_RTP_SHDW_SHIFT 3
+#define OMAP44XX_REG_T_RTP_SHDW_MASK (0x7 << 3)
+#define OMAP44XX_REG_T_CKE_SHDW_SHIFT 0
+#define OMAP44XX_REG_T_CKE_SHDW_MASK (0x7 << 0)
+
+/* SDRAM_TIM_3 */
+#define OMAP44XX_REG_T_CKESR_SHIFT 21
+#define OMAP44XX_REG_T_CKESR_MASK (0x7 << 21)
+#define OMAP44XX_REG_ZQ_ZQCS_SHIFT 15
+#define OMAP44XX_REG_ZQ_ZQCS_MASK (0x3f << 15)
+#define OMAP44XX_REG_T_TDQSCKMAX_SHIFT 13
+#define OMAP44XX_REG_T_TDQSCKMAX_MASK (0x3 << 13)
+#define OMAP44XX_REG_T_RFC_SHIFT 4
+#define OMAP44XX_REG_T_RFC_MASK (0x1ff << 4)
+#define OMAP44XX_REG_T_RAS_MAX_SHIFT 0
+#define OMAP44XX_REG_T_RAS_MAX_MASK (0xf << 0)
+
+/* SDRAM_TIM_3_SHDW */
+#define OMAP44XX_REG_T_CKESR_SHDW_SHIFT 21
+#define OMAP44XX_REG_T_CKESR_SHDW_MASK (0x7 << 21)
+#define OMAP44XX_REG_ZQ_ZQCS_SHDW_SHIFT 15
+#define OMAP44XX_REG_ZQ_ZQCS_SHDW_MASK (0x3f << 15)
+#define OMAP44XX_REG_T_TDQSCKMAX_SHDW_SHIFT 13
+#define OMAP44XX_REG_T_TDQSCKMAX_SHDW_MASK (0x3 << 13)
+#define OMAP44XX_REG_T_RFC_SHDW_SHIFT 4
+#define OMAP44XX_REG_T_RFC_SHDW_MASK (0x1ff << 4)
+#define OMAP44XX_REG_T_RAS_MAX_SHDW_SHIFT 0
+#define OMAP44XX_REG_T_RAS_MAX_SHDW_MASK (0xf << 0)
+
+/* LPDDR2_NVM_TIM */
+#define OMAP44XX_REG_NVM_T_XP_SHIFT 28
+#define OMAP44XX_REG_NVM_T_XP_MASK (0x7 << 28)
+#define OMAP44XX_REG_NVM_T_WTR_SHIFT 24
+#define OMAP44XX_REG_NVM_T_WTR_MASK (0x7 << 24)
+#define OMAP44XX_REG_NVM_T_RP_SHIFT 20
+#define OMAP44XX_REG_NVM_T_RP_MASK (0xf << 20)
+#define OMAP44XX_REG_NVM_T_WRA_SHIFT 16
+#define OMAP44XX_REG_NVM_T_WRA_MASK (0xf << 16)
+#define OMAP44XX_REG_NVM_T_RRD_SHIFT 8
+#define OMAP44XX_REG_NVM_T_RRD_MASK (0xff << 8)
+#define OMAP44XX_REG_NVM_T_RCDMIN_SHIFT 0
+#define OMAP44XX_REG_NVM_T_RCDMIN_MASK (0xff << 0)
+
+/* LPDDR2_NVM_TIM_SHDW */
+#define OMAP44XX_REG_NVM_T_XP_SHDW_SHIFT 28
+#define OMAP44XX_REG_NVM_T_XP_SHDW_MASK (0x7 << 28)
+#define OMAP44XX_REG_NVM_T_WTR_SHDW_SHIFT 24
+#define OMAP44XX_REG_NVM_T_WTR_SHDW_MASK (0x7 << 24)
+#define OMAP44XX_REG_NVM_T_RP_SHDW_SHIFT 20
+#define OMAP44XX_REG_NVM_T_RP_SHDW_MASK (0xf << 20)
+#define OMAP44XX_REG_NVM_T_WRA_SHDW_SHIFT 16
+#define OMAP44XX_REG_NVM_T_WRA_SHDW_MASK (0xf << 16)
+#define OMAP44XX_REG_NVM_T_RRD_SHDW_SHIFT 8
+#define OMAP44XX_REG_NVM_T_RRD_SHDW_MASK (0xff << 8)
+#define OMAP44XX_REG_NVM_T_RCDMIN_SHDW_SHIFT 0
+#define OMAP44XX_REG_NVM_T_RCDMIN_SHDW_MASK (0xff << 0)
+
+/* PWR_MGMT_CTRL */
+#define OMAP44XX_REG_IDLEMODE_SHIFT 30
+#define OMAP44XX_REG_IDLEMODE_MASK (0x3 << 30)
+#define OMAP44XX_REG_PD_TIM_SHIFT 12
+#define OMAP44XX_REG_PD_TIM_MASK (0xf << 12)
+#define OMAP44XX_REG_DPD_EN_SHIFT 11
+#define OMAP44XX_REG_DPD_EN_MASK (1 << 11)
+#define OMAP44XX_REG_LP_MODE_SHIFT 8
+#define OMAP44XX_REG_LP_MODE_MASK (0x7 << 8)
+#define OMAP44XX_REG_SR_TIM_SHIFT 4
+#define OMAP44XX_REG_SR_TIM_MASK (0xf << 4)
+#define OMAP44XX_REG_CS_TIM_SHIFT 0
+#define OMAP44XX_REG_CS_TIM_MASK (0xf << 0)
+
+/* PWR_MGMT_CTRL_SHDW */
+#define OMAP44XX_REG_PD_TIM_SHDW_SHIFT 8
+#define OMAP44XX_REG_PD_TIM_SHDW_MASK (0xf << 8)
+#define OMAP44XX_REG_SR_TIM_SHDW_SHIFT 4
+#define OMAP44XX_REG_SR_TIM_SHDW_MASK (0xf << 4)
+#define OMAP44XX_REG_CS_TIM_SHDW_SHIFT 0
+#define OMAP44XX_REG_CS_TIM_SHDW_MASK (0xf << 0)
+
+/* LPDDR2_MODE_REG_DATA */
+#define OMAP44XX_REG_VALUE_0_SHIFT 0
+#define OMAP44XX_REG_VALUE_0_MASK (0x7f << 0)
+
+/* LPDDR2_MODE_REG_CFG */
+#define OMAP44XX_REG_CS_SHIFT 31
+#define OMAP44XX_REG_CS_MASK (1 << 31)
+#define OMAP44XX_REG_REFRESH_EN_SHIFT 30
+#define OMAP44XX_REG_REFRESH_EN_MASK (1 << 30)
+#define OMAP44XX_REG_ADDRESS_SHIFT 0
+#define OMAP44XX_REG_ADDRESS_MASK (0xff << 0)
+
+/* OCP_CONFIG */
+#define OMAP44XX_REG_SYS_THRESH_MAX_SHIFT 24
+#define OMAP44XX_REG_SYS_THRESH_MAX_MASK (0xf << 24)
+#define OMAP44XX_REG_MPU_THRESH_MAX_SHIFT 20
+#define OMAP44XX_REG_MPU_THRESH_MAX_MASK (0xf << 20)
+#define OMAP44XX_REG_LL_THRESH_MAX_SHIFT 16
+#define OMAP44XX_REG_LL_THRESH_MAX_MASK (0xf << 16)
+#define OMAP44XX_REG_PR_OLD_COUNT_SHIFT 0
+#define OMAP44XX_REG_PR_OLD_COUNT_MASK (0xff << 0)
+
+/* OCP_CFG_VAL_1 */
+#define OMAP44XX_REG_SYS_BUS_WIDTH_SHIFT 30
+#define OMAP44XX_REG_SYS_BUS_WIDTH_MASK (0x3 << 30)
+#define OMAP44XX_REG_LL_BUS_WIDTH_SHIFT 28
+#define OMAP44XX_REG_LL_BUS_WIDTH_MASK (0x3 << 28)
+#define OMAP44XX_REG_WR_FIFO_DEPTH_SHIFT 8
+#define OMAP44XX_REG_WR_FIFO_DEPTH_MASK (0xff << 8)
+#define OMAP44XX_REG_CMD_FIFO_DEPTH_SHIFT 0
+#define OMAP44XX_REG_CMD_FIFO_DEPTH_MASK (0xff << 0)
+
+/* OCP_CFG_VAL_2 */
+#define OMAP44XX_REG_RREG_FIFO_DEPTH_SHIFT 16
+#define OMAP44XX_REG_RREG_FIFO_DEPTH_MASK (0xff << 16)
+#define OMAP44XX_REG_RSD_FIFO_DEPTH_SHIFT 8
+#define OMAP44XX_REG_RSD_FIFO_DEPTH_MASK (0xff << 8)
+#define OMAP44XX_REG_RCMD_FIFO_DEPTH_SHIFT 0
+#define OMAP44XX_REG_RCMD_FIFO_DEPTH_MASK (0xff << 0)
+
+/* IODFT_TLGC */
+#define OMAP44XX_REG_TLEC_SHIFT 16
+#define OMAP44XX_REG_TLEC_MASK (0xffff << 16)
+#define OMAP44XX_REG_MT_SHIFT 14
+#define OMAP44XX_REG_MT_MASK (1 << 14)
+#define OMAP44XX_REG_ACT_CAP_EN_SHIFT 13
+#define OMAP44XX_REG_ACT_CAP_EN_MASK (1 << 13)
+#define OMAP44XX_REG_OPG_LD_SHIFT 12
+#define OMAP44XX_REG_OPG_LD_MASK (1 << 12)
+#define OMAP44XX_REG_RESET_PHY_SHIFT 10
+#define OMAP44XX_REG_RESET_PHY_MASK (1 << 10)
+#define OMAP44XX_REG_MMS_SHIFT 8
+#define OMAP44XX_REG_MMS_MASK (1 << 8)
+#define OMAP44XX_REG_MC_SHIFT 4
+#define OMAP44XX_REG_MC_MASK (0x3 << 4)
+#define OMAP44XX_REG_PC_SHIFT 1
+#define OMAP44XX_REG_PC_MASK (0x7 << 1)
+#define OMAP44XX_REG_TM_SHIFT 0
+#define OMAP44XX_REG_TM_MASK (1 << 0)
+
+/* IODFT_CTRL_MISR_RSLT */
+#define OMAP44XX_REG_DQM_TLMR_SHIFT 16
+#define OMAP44XX_REG_DQM_TLMR_MASK (0x3ff << 16)
+#define OMAP44XX_REG_CTL_TLMR_SHIFT 0
+#define OMAP44XX_REG_CTL_TLMR_MASK (0x7ff << 0)
+
+/* IODFT_ADDR_MISR_RSLT */
+#define OMAP44XX_REG_ADDR_TLMR_SHIFT 0
+#define OMAP44XX_REG_ADDR_TLMR_MASK (0x1fffff << 0)
+
+/* IODFT_DATA_MISR_RSLT_1 */
+#define OMAP44XX_REG_DATA_TLMR_31_0_SHIFT 0
+#define OMAP44XX_REG_DATA_TLMR_31_0_MASK (0xffffffff << 0)
+
+/* IODFT_DATA_MISR_RSLT_2 */
+#define OMAP44XX_REG_DATA_TLMR_63_32_SHIFT 0
+#define OMAP44XX_REG_DATA_TLMR_63_32_MASK (0xffffffff << 0)
+
+/* IODFT_DATA_MISR_RSLT_3 */
+#define OMAP44XX_REG_DATA_TLMR_66_64_SHIFT 0
+#define OMAP44XX_REG_DATA_TLMR_66_64_MASK (0x7 << 0)
+
+/* PERF_CNT_1 */
+#define OMAP44XX_REG_COUNTER1_SHIFT 0
+#define OMAP44XX_REG_COUNTER1_MASK (0xffffffff << 0)
+
+/* PERF_CNT_2 */
+#define OMAP44XX_REG_COUNTER2_SHIFT 0
+#define OMAP44XX_REG_COUNTER2_MASK (0xffffffff << 0)
+
+/* PERF_CNT_CFG */
+#define OMAP44XX_REG_CNTR2_MCONNID_EN_SHIFT 31
+#define OMAP44XX_REG_CNTR2_MCONNID_EN_MASK (1 << 31)
+#define OMAP44XX_REG_CNTR2_REGION_EN_SHIFT 30
+#define OMAP44XX_REG_CNTR2_REGION_EN_MASK (1 << 30)
+#define OMAP44XX_REG_CNTR2_CFG_SHIFT 16
+#define OMAP44XX_REG_CNTR2_CFG_MASK (0xf << 16)
+#define OMAP44XX_REG_CNTR1_MCONNID_EN_SHIFT 15
+#define OMAP44XX_REG_CNTR1_MCONNID_EN_MASK (1 << 15)
+#define OMAP44XX_REG_CNTR1_REGION_EN_SHIFT 14
+#define OMAP44XX_REG_CNTR1_REGION_EN_MASK (1 << 14)
+#define OMAP44XX_REG_CNTR1_CFG_SHIFT 0
+#define OMAP44XX_REG_CNTR1_CFG_MASK (0xf << 0)
+
+/* PERF_CNT_SEL */
+#define OMAP44XX_REG_MCONNID2_SHIFT 24
+#define OMAP44XX_REG_MCONNID2_MASK (0xff << 24)
+#define OMAP44XX_REG_REGION_SEL2_SHIFT 16
+#define OMAP44XX_REG_REGION_SEL2_MASK (0x3 << 16)
+#define OMAP44XX_REG_MCONNID1_SHIFT 8
+#define OMAP44XX_REG_MCONNID1_MASK (0xff << 8)
+#define OMAP44XX_REG_REGION_SEL1_SHIFT 0
+#define OMAP44XX_REG_REGION_SEL1_MASK (0x3 << 0)
+
+/* PERF_CNT_TIM */
+#define OMAP44XX_REG_TOTAL_TIME_SHIFT 0
+#define OMAP44XX_REG_TOTAL_TIME_MASK (0xffffffff << 0)
+
+/* READ_IDLE_CTRL */
+#define OMAP44XX_REG_READ_IDLE_LEN_SHIFT 16
+#define OMAP44XX_REG_READ_IDLE_LEN_MASK (0xf << 16)
+#define OMAP44XX_REG_READ_IDLE_INTERVAL_SHIFT 0
+#define OMAP44XX_REG_READ_IDLE_INTERVAL_MASK (0x1ff << 0)
+
+/* READ_IDLE_CTRL_SHDW */
+#define OMAP44XX_REG_READ_IDLE_LEN_SHDW_SHIFT 16
+#define OMAP44XX_REG_READ_IDLE_LEN_SHDW_MASK (0xf << 16)
+#define OMAP44XX_REG_READ_IDLE_INTERVAL_SHDW_SHIFT 0
+#define OMAP44XX_REG_READ_IDLE_INTERVAL_SHDW_MASK (0x1ff << 0)
+
+/* IRQ_EOI */
+#define OMAP44XX_REG_EOI_SHIFT 0
+#define OMAP44XX_REG_EOI_MASK (1 << 0)
+
+/* IRQSTATUS_RAW_SYS */
+#define OMAP44XX_REG_DNV_SYS_SHIFT 2
+#define OMAP44XX_REG_DNV_SYS_MASK (1 << 2)
+#define OMAP44XX_REG_TA_SYS_SHIFT 1
+#define OMAP44XX_REG_TA_SYS_MASK (1 << 1)
+#define OMAP44XX_REG_ERR_SYS_SHIFT 0
+#define OMAP44XX_REG_ERR_SYS_MASK (1 << 0)
+
+/* IRQSTATUS_RAW_LL */
+#define OMAP44XX_REG_DNV_LL_SHIFT 2
+#define OMAP44XX_REG_DNV_LL_MASK (1 << 2)
+#define OMAP44XX_REG_TA_LL_SHIFT 1
+#define OMAP44XX_REG_TA_LL_MASK (1 << 1)
+#define OMAP44XX_REG_ERR_LL_SHIFT 0
+#define OMAP44XX_REG_ERR_LL_MASK (1 << 0)
+
+/* IRQSTATUS_SYS */
+
+/* IRQSTATUS_LL */
+
+/* IRQENABLE_SET_SYS */
+#define OMAP44XX_REG_EN_DNV_SYS_SHIFT 2
+#define OMAP44XX_REG_EN_DNV_SYS_MASK (1 << 2)
+#define OMAP44XX_REG_EN_TA_SYS_SHIFT 1
+#define OMAP44XX_REG_EN_TA_SYS_MASK (1 << 1)
+#define OMAP44XX_REG_EN_ERR_SYS_SHIFT 0
+#define OMAP44XX_REG_EN_ERR_SYS_MASK (1 << 0)
+
+/* IRQENABLE_SET_LL */
+#define OMAP44XX_REG_EN_DNV_LL_SHIFT 2
+#define OMAP44XX_REG_EN_DNV_LL_MASK (1 << 2)
+#define OMAP44XX_REG_EN_TA_LL_SHIFT 1
+#define OMAP44XX_REG_EN_TA_LL_MASK (1 << 1)
+#define OMAP44XX_REG_EN_ERR_LL_SHIFT 0
+#define OMAP44XX_REG_EN_ERR_LL_MASK (1 << 0)
+
+/* IRQENABLE_CLR_SYS */
+
+/* IRQENABLE_CLR_LL */
+
+/* ZQ_CONFIG */
+#define OMAP44XX_REG_ZQ_CS1EN_SHIFT 31
+#define OMAP44XX_REG_ZQ_CS1EN_MASK (1 << 31)
+#define OMAP44XX_REG_ZQ_CS0EN_SHIFT 30
+#define OMAP44XX_REG_ZQ_CS0EN_MASK (1 << 30)
+#define OMAP44XX_REG_ZQ_DUALCALEN_SHIFT 29
+#define OMAP44XX_REG_ZQ_DUALCALEN_MASK (1 << 29)
+#define OMAP44XX_REG_ZQ_SFEXITEN_SHIFT 28
+#define OMAP44XX_REG_ZQ_SFEXITEN_MASK (1 << 28)
+#define OMAP44XX_REG_ZQ_ZQINIT_MULT_SHIFT 18
+#define OMAP44XX_REG_ZQ_ZQINIT_MULT_MASK (0x3 << 18)
+#define OMAP44XX_REG_ZQ_ZQCL_MULT_SHIFT 16
+#define OMAP44XX_REG_ZQ_ZQCL_MULT_MASK (0x3 << 16)
+#define OMAP44XX_REG_ZQ_REFINTERVAL_SHIFT 0
+#define OMAP44XX_REG_ZQ_REFINTERVAL_MASK (0xffff << 0)
+
+/* TEMP_ALERT_CONFIG */
+#define OMAP44XX_REG_TA_CS1EN_SHIFT 31
+#define OMAP44XX_REG_TA_CS1EN_MASK (1 << 31)
+#define OMAP44XX_REG_TA_CS0EN_SHIFT 30
+#define OMAP44XX_REG_TA_CS0EN_MASK (1 << 30)
+#define OMAP44XX_REG_TA_SFEXITEN_SHIFT 28
+#define OMAP44XX_REG_TA_SFEXITEN_MASK (1 << 28)
+#define OMAP44XX_REG_TA_DEVWDT_SHIFT 26
+#define OMAP44XX_REG_TA_DEVWDT_MASK (0x3 << 26)
+#define OMAP44XX_REG_TA_DEVCNT_SHIFT 24
+#define OMAP44XX_REG_TA_DEVCNT_MASK (0x3 << 24)
+#define OMAP44XX_REG_TA_REFINTERVAL_SHIFT 0
+#define OMAP44XX_REG_TA_REFINTERVAL_MASK (0x3fffff << 0)
+
+/* OCP_ERR_LOG */
+#define OMAP44XX_REG_MADDRSPACE_SHIFT 14
+#define OMAP44XX_REG_MADDRSPACE_MASK (0x3 << 14)
+#define OMAP44XX_REG_MBURSTSEQ_SHIFT 11
+#define OMAP44XX_REG_MBURSTSEQ_MASK (0x7 << 11)
+#define OMAP44XX_REG_MCMD_SHIFT 8
+#define OMAP44XX_REG_MCMD_MASK (0x7 << 8)
+#define OMAP44XX_REG_MCONNID_SHIFT 0
+#define OMAP44XX_REG_MCONNID_MASK (0xff << 0)
+
+/* DDR_PHY_CTRL_1 */
+#define OMAP44XX_REG_DDR_PHY_CTRL_1_SHIFT 4
+#define OMAP44XX_REG_DDR_PHY_CTRL_1_MASK (0xfffffff << 4)
+#define OMAP44XX_REG_READ_LATENCY_SHIFT 0
+#define OMAP44XX_REG_READ_LATENCY_MASK (0xf << 0)
+#define OMAP44XX_REG_DLL_SLAVE_DLY_CTRL_SHIFT 4
+#define OMAP44XX_REG_DLL_SLAVE_DLY_CTRL_MASK (0xFF << 4)
+#define OMAP44XX_EMIF_DDR_PHY_CTRL_1_BASE_VAL_SHIFT 12
+#define OMAP44XX_EMIF_DDR_PHY_CTRL_1_BASE_VAL_MASK (0xFFFFF << 12)
+
+/* DDR_PHY_CTRL_1_SHDW */
+#define OMAP44XX_REG_DDR_PHY_CTRL_1_SHDW_SHIFT 4
+#define OMAP44XX_REG_DDR_PHY_CTRL_1_SHDW_MASK (0xfffffff << 4)
+#define OMAP44XX_REG_READ_LATENCY_SHDW_SHIFT 0
+#define OMAP44XX_REG_READ_LATENCY_SHDW_MASK (0xf << 0)
+#define OMAP44XX_REG_DLL_SLAVE_DLY_CTRL_SHDW_SHIFT 4
+#define OMAP44XX_REG_DLL_SLAVE_DLY_CTRL_SHDW_MASK (0xFF << 4)
+#define OMAP44XX_EMIF_DDR_PHY_CTRL_1_BASE_VAL_SHDW_SHIFT 12
+#define OMAP44XX_EMIF_DDR_PHY_CTRL_1_BASE_VAL_SHDW_MASK (0xFFFFF << 12)
+
+/* DDR_PHY_CTRL_2 */
+#define OMAP44XX_REG_DDR_PHY_CTRL_2_SHIFT 0
+#define OMAP44XX_REG_DDR_PHY_CTRL_2_MASK (0xffffffff << 0)
+
+/* DMM */
+#define OMAP44XX_DMM_LISA_MAP_BASE 0x4E000040
+
+/* Memory Adapter (4460 onwards) */
+#define OMAP44XX_MA_LISA_MAP_BASE 0x482AF040
+
+/* DMM_LISA_MAP */
+#define OMAP44XX_SYS_ADDR_SHIFT 24
+#define OMAP44XX_SYS_ADDR_MASK (0xff << 24)
+#define OMAP44XX_SYS_SIZE_SHIFT 20
+#define OMAP44XX_SYS_SIZE_MASK (0x7 << 20)
+#define OMAP44XX_SDRC_INTL_SHIFT 18
+#define OMAP44XX_SDRC_INTL_MASK (0x3 << 18)
+#define OMAP44XX_SDRC_ADDRSPC_SHIFT 16
+#define OMAP44XX_SDRC_ADDRSPC_MASK (0x3 << 16)
+#define OMAP44XX_SDRC_MAP_SHIFT 8
+#define OMAP44XX_SDRC_MAP_MASK (0x3 << 8)
+#define OMAP44XX_SDRC_ADDR_SHIFT 0
+#define OMAP44XX_SDRC_ADDR_MASK (0xff << 0)
+
+/* DMM_LISA_MAP fields */
+#define DMM_SDRC_MAP_UNMAPPED 0
+#define DMM_SDRC_MAP_EMIF1_ONLY 1
+#define DMM_SDRC_MAP_EMIF2_ONLY 2
+#define DMM_SDRC_MAP_EMIF1_AND_EMIF2 3
+
+#define DMM_SDRC_INTL_NONE 0
+#define DMM_SDRC_INTL_128B 1
+#define DMM_SDRC_INTL_256B 2
+#define DMM_SDRC_INTL_512 3
+
+#define DMM_SDRC_ADDR_SPC_SDRAM 0
+#define DMM_SDRC_ADDR_SPC_NVM 1
+#define DMM_SDRC_ADDR_SPC_INVALID 2
+
+#define DMM_LISA_MAP_INTERLEAVED_BASE_VAL (\
+ (DMM_SDRC_MAP_EMIF1_AND_EMIF2 << OMAP44XX_SDRC_MAP_SHIFT) |\
+ (DMM_SDRC_ADDR_SPC_SDRAM << OMAP44XX_SDRC_ADDRSPC_SHIFT) |\
+ (DMM_SDRC_INTL_128B << OMAP44XX_SDRC_INTL_SHIFT) |\
+ (CONFIG_SYS_SDRAM_BASE << OMAP44XX_SYS_ADDR_SHIFT))
+
+#define DMM_LISA_MAP_EMIF1_ONLY_BASE_VAL (\
+ (DMM_SDRC_MAP_EMIF1_ONLY << OMAP44XX_SDRC_MAP_SHIFT)|\
+ (DMM_SDRC_ADDR_SPC_SDRAM << OMAP44XX_SDRC_ADDRSPC_SHIFT)|\
+ (DMM_SDRC_INTL_NONE << OMAP44XX_SDRC_INTL_SHIFT))
+
+#define DMM_LISA_MAP_EMIF2_ONLY_BASE_VAL (\
+ (DMM_SDRC_MAP_EMIF2_ONLY << OMAP44XX_SDRC_MAP_SHIFT)|\
+ (DMM_SDRC_ADDR_SPC_SDRAM << OMAP44XX_SDRC_ADDRSPC_SHIFT)|\
+ (DMM_SDRC_INTL_NONE << OMAP44XX_SDRC_INTL_SHIFT))
+
+/* Trap for invalid TILER PAT entries */
+#define DMM_LISA_MAP_0_INVAL_ADDR_TRAP (\
+ (0 << OMAP44XX_SDRC_ADDR_SHIFT) |\
+ (DMM_SDRC_MAP_EMIF1_ONLY << OMAP44XX_SDRC_MAP_SHIFT)|\
+ (DMM_SDRC_ADDR_SPC_INVALID << OMAP44XX_SDRC_ADDRSPC_SHIFT)|\
+ (DMM_SDRC_INTL_NONE << OMAP44XX_SDRC_INTL_SHIFT)|\
+ (0xFF << OMAP44XX_SYS_ADDR_SHIFT))
+
+
+/* Reg mapping structure */
+struct emif_reg_struct {
+ u32 emif_mod_id_rev;
+ u32 emif_status;
+ u32 emif_sdram_config;
+ u32 emif_lpddr2_nvm_config;
+ u32 emif_sdram_ref_ctrl;
+ u32 emif_sdram_ref_ctrl_shdw;
+ u32 emif_sdram_tim_1;
+ u32 emif_sdram_tim_1_shdw;
+ u32 emif_sdram_tim_2;
+ u32 emif_sdram_tim_2_shdw;
+ u32 emif_sdram_tim_3;
+ u32 emif_sdram_tim_3_shdw;
+ u32 emif_lpddr2_nvm_tim;
+ u32 emif_lpddr2_nvm_tim_shdw;
+ u32 emif_pwr_mgmt_ctrl;
+ u32 emif_pwr_mgmt_ctrl_shdw;
+ u32 emif_lpddr2_mode_reg_data;
+ u32 padding1[1];
+ u32 emif_lpddr2_mode_reg_data_es2;
+ u32 padding11[1];
+ u32 emif_lpddr2_mode_reg_cfg;
+ u32 emif_l3_config;
+ u32 emif_l3_cfg_val_1;
+ u32 emif_l3_cfg_val_2;
+ u32 emif_iodft_tlgc;
+ u32 padding2[7];
+ u32 emif_perf_cnt_1;
+ u32 emif_perf_cnt_2;
+ u32 emif_perf_cnt_cfg;
+ u32 emif_perf_cnt_sel;
+ u32 emif_perf_cnt_tim;
+ u32 padding3;
+ u32 emif_read_idlectrl;
+ u32 emif_read_idlectrl_shdw;
+ u32 padding4;
+ u32 emif_irqstatus_raw_sys;
+ u32 emif_irqstatus_raw_ll;
+ u32 emif_irqstatus_sys;
+ u32 emif_irqstatus_ll;
+ u32 emif_irqenable_set_sys;
+ u32 emif_irqenable_set_ll;
+ u32 emif_irqenable_clr_sys;
+ u32 emif_irqenable_clr_ll;
+ u32 padding5;
+ u32 emif_zq_config;
+ u32 emif_temp_alert_config;
+ u32 emif_l3_err_log;
+ u32 padding6[4];
+ u32 emif_ddr_phy_ctrl_1;
+ u32 emif_ddr_phy_ctrl_1_shdw;
+ u32 emif_ddr_phy_ctrl_2;
+};
+
+struct dmm_lisa_map_regs {
+ u32 dmm_lisa_map_0;
+ u32 dmm_lisa_map_1;
+ u32 dmm_lisa_map_2;
+ u32 dmm_lisa_map_3;
+};
+
+struct control_lpddr2io_regs {
+ u32 control_lpddr2io1_0;
+ u32 control_lpddr2io1_1;
+ u32 control_lpddr2io1_2;
+ u32 control_lpddr2io1_3;
+ u32 control_lpddr2io2_0;
+ u32 control_lpddr2io2_1;
+ u32 control_lpddr2io2_2;
+ u32 control_lpddr2io2_3;
+};
+
+#define CS0 0
+#define CS1 1
+/* The maximum frequency at which the LPDDR2 interface can operate in Hz*/
+#define MAX_LPDDR2_FREQ 400000000 /* 400 MHz */
+
+/*
+ * The period of DDR clk is represented as numerator and denominator for
+ * better accuracy in integer based calculations. However, if the numerator
+ * and denominator are very huge there may be chances of overflow in
+ * calculations. So, as a trade-off keep denominator(and consequently
+ * numerator) within a limit sacrificing some accuracy - but not much
+ * If denominator and numerator are already small (such as at 400 MHz)
+ * no adjustment is needed
+ */
+#define EMIF_PERIOD_DEN_LIMIT 1000
+/*
+ * Maximum number of different frequencies supported by EMIF driver
+ * Determines the number of entries in the pointer array for register
+ * cache
+ */
+#define EMIF_MAX_NUM_FREQUENCIES 6
+/*
+ * Indices into the Addressing Table array.
+ * One entry each for all the different types of devices with different
+ * addressing schemes
+ */
+#define ADDR_TABLE_INDEX64M 0
+#define ADDR_TABLE_INDEX128M 1
+#define ADDR_TABLE_INDEX256M 2
+#define ADDR_TABLE_INDEX512M 3
+#define ADDR_TABLE_INDEX1GS4 4
+#define ADDR_TABLE_INDEX2GS4 5
+#define ADDR_TABLE_INDEX4G 6
+#define ADDR_TABLE_INDEX8G 7
+#define ADDR_TABLE_INDEX1GS2 8
+#define ADDR_TABLE_INDEX2GS2 9
+#define ADDR_TABLE_INDEXMAX 10
+
+/* Number of Row bits */
+#define ROW_9 0
+#define ROW_10 1
+#define ROW_11 2
+#define ROW_12 3
+#define ROW_13 4
+#define ROW_14 5
+#define ROW_15 6
+#define ROW_16 7
+
+/* Number of Column bits */
+#define COL_8 0
+#define COL_9 1
+#define COL_10 2
+#define COL_11 3
+#define COL_7 4 /*Not supported by OMAP included for completeness */
+
+/* Number of Banks*/
+#define BANKS1 0
+#define BANKS2 1
+#define BANKS4 2
+#define BANKS8 3
+
+/* Refresh rate in micro seconds x 10 */
+#define T_REFI_15_6 156
+#define T_REFI_7_8 78
+#define T_REFI_3_9 39
+
+#define EBANK_CS1_DIS 0
+#define EBANK_CS1_EN 1
+
+/* Read Latency used by the device at reset */
+#define RL_BOOT 3
+/* Read Latency for the highest frequency you want to use */
+#define RL_FINAL 6
+
+/* Interleaving policies at EMIF level- between banks and Chip Selects */
+#define EMIF_INTERLEAVING_POLICY_MAX_INTERLEAVING 0
+#define EMIF_INTERLEAVING_POLICY_NO_BANK_INTERLEAVING 3
+
+/*
+ * Interleaving policy to be used
+ * Currently set to MAX interleaving for better performance
+ */
+#define EMIF_INTERLEAVING_POLICY EMIF_INTERLEAVING_POLICY_MAX_INTERLEAVING
+
+/* State of the core voltage:
+ * This is important for some parameters such as read idle control and
+ * ZQ calibration timings. Timings are much stricter when voltage ramp
+ * is happening compared to when the voltage is stable.
+ * We need to calculate two sets of values for these parameters and use
+ * them accordingly
+ */
+#define LPDDR2_VOLTAGE_STABLE 0
+#define LPDDR2_VOLTAGE_RAMPING 1
+
+/* Length of the forced read idle period in terms of cycles */
+#define EMIF_REG_READ_IDLE_LEN_VAL 5
+
+/* Interval between forced 'read idles' */
+/* To be used when voltage is changed for DPS/DVFS - 1us */
+#define READ_IDLE_INTERVAL_DVFS (1*1000)
+/*
+ * To be used when voltage is not scaled except by Smart Reflex
+ * 50us - or maximum value will do
+ */
+#define READ_IDLE_INTERVAL_NORMAL (50*1000)
+
+
+/*
+ * Unless voltage is changing due to DVFS one ZQCS command every 50ms should
+ * be enough. This shoule be enough also in the case when voltage is changing
+ * due to smart-reflex.
+ */
+#define EMIF_ZQCS_INTERVAL_NORMAL_IN_US (50*1000)
+/*
+ * If voltage is changing due to DVFS ZQCS should be performed more
+ * often(every 50us)
+ */
+#define EMIF_ZQCS_INTERVAL_DVFS_IN_US 50
+
+/* The interval between ZQCL commands as a multiple of ZQCS interval */
+#define REG_ZQ_ZQCL_MULT 4
+/* The interval between ZQINIT commands as a multiple of ZQCL interval */
+#define REG_ZQ_ZQINIT_MULT 3
+/* Enable ZQ Calibration on exiting Self-refresh */
+#define REG_ZQ_SFEXITEN_ENABLE 1
+/*
+ * ZQ Calibration simultaneously on both chip-selects:
+ * Needs one calibration resistor per CS
+ * None of the boards that we know of have this capability
+ * So disabled by default
+ */
+#define REG_ZQ_DUALCALEN_DISABLE 0
+/*
+ * Enable ZQ Calibration by default on CS0. If we are asked to program
+ * the EMIF there will be something connected to CS0 for sure
+ */
+#define REG_ZQ_CS0EN_ENABLE 1
+
+/* EMIF_PWR_MGMT_CTRL register */
+/* Low power modes */
+#define LP_MODE_DISABLE 0
+#define LP_MODE_CLOCK_STOP 1
+#define LP_MODE_SELF_REFRESH 2
+#define LP_MODE_PWR_DN 3
+
+/* REG_DPD_EN */
+#define DPD_DISABLE 0
+#define DPD_ENABLE 1
+
+/* Maximum delay before Low Power Modes */
+#define REG_CS_TIM 0xF
+#define REG_SR_TIM 0xF
+#define REG_PD_TIM 0xF
+
+/* EMIF_PWR_MGMT_CTRL register */
+#define EMIF_PWR_MGMT_CTRL (\
+ ((REG_CS_TIM << OMAP44XX_REG_CS_TIM_SHIFT) & OMAP44XX_REG_CS_TIM_MASK)|\
+ ((REG_SR_TIM << OMAP44XX_REG_SR_TIM_SHIFT) & OMAP44XX_REG_SR_TIM_MASK)|\
+ ((REG_PD_TIM << OMAP44XX_REG_PD_TIM_SHIFT) & OMAP44XX_REG_PD_TIM_MASK)|\
+ ((REG_PD_TIM << OMAP44XX_REG_PD_TIM_SHIFT) & OMAP44XX_REG_PD_TIM_MASK)|\
+ ((LP_MODE_DISABLE << OMAP44XX_REG_LP_MODE_SHIFT)\
+ & OMAP44XX_REG_LP_MODE_MASK) |\
+ ((DPD_DISABLE << OMAP44XX_REG_DPD_EN_SHIFT)\
+ & OMAP44XX_REG_DPD_EN_MASK))\
+
+#define EMIF_PWR_MGMT_CTRL_SHDW (\
+ ((REG_CS_TIM << OMAP44XX_REG_CS_TIM_SHDW_SHIFT)\
+ & OMAP44XX_REG_CS_TIM_SHDW_MASK) |\
+ ((REG_SR_TIM << OMAP44XX_REG_SR_TIM_SHDW_SHIFT)\
+ & OMAP44XX_REG_SR_TIM_SHDW_MASK) |\
+ ((REG_PD_TIM << OMAP44XX_REG_PD_TIM_SHDW_SHIFT)\
+ & OMAP44XX_REG_PD_TIM_SHDW_MASK) |\
+ ((REG_PD_TIM << OMAP44XX_REG_PD_TIM_SHDW_SHIFT)\
+ & OMAP44XX_REG_PD_TIM_SHDW_MASK))
+
+/* EMIF_L3_CONFIG register value */
+#define EMIF_L3_CONFIG_VAL_SYS_10_LL_0 0x0A0000FF
+#define EMIF_L3_CONFIG_VAL_SYS_10_MPU_3_LL_0 0x0A300000
+/*
+ * Value of bits 12:31 of DDR_PHY_CTRL_1 register:
+ * All these fields have magic values dependent on frequency and
+ * determined by PHY and DLL integration with EMIF. Setting the magic
+ * values suggested by hw team.
+ */
+#define EMIF_DDR_PHY_CTRL_1_BASE_VAL 0x049FF
+#define EMIF_DLL_SLAVE_DLY_CTRL_400_MHZ 0x41
+#define EMIF_DLL_SLAVE_DLY_CTRL_200_MHZ 0x80
+#define EMIF_DLL_SLAVE_DLY_CTRL_100_MHZ_AND_LESS 0xFF
+
+/*
+* MR1 value:
+* Burst length : 8
+* Burst type : sequential
+* Wrap : enabled
+* nWR : 3(default). EMIF does not do pre-charge.
+* : So nWR is don't care
+*/
+#define MR1_BL_8_BT_SEQ_WRAP_EN_NWR_3 0x23
+
+/* MR2 */
+#define MR2_RL3_WL1 1
+#define MR2_RL4_WL2 2
+#define MR2_RL5_WL2 3
+#define MR2_RL6_WL3 4
+
+/* MR10: ZQ calibration codes */
+#define MR10_ZQ_ZQCS 0x56
+#define MR10_ZQ_ZQCL 0xAB
+#define MR10_ZQ_ZQINIT 0xFF
+#define MR10_ZQ_ZQRESET 0xC3
+
+/* TEMP_ALERT_CONFIG */
+#define TEMP_ALERT_POLL_INTERVAL_MS 360 /* for temp gradient - 5 C/s */
+#define TEMP_ALERT_CONFIG_DEVCT_1 0
+#define TEMP_ALERT_CONFIG_DEVWDT_32 2
+
+/* MR16 value: refresh full array(no partial array self refresh) */
+#define MR16_REF_FULL_ARRAY 0
+
+/* LPDDR2 IO regs */
+#define CONTROL_LPDDR2IO_SLEW_125PS_DRV8_PULL_DOWN 0x1C1C1C1C
+#define CONTROL_LPDDR2IO_SLEW_325PS_DRV8_GATE_KEEPER 0x9E9E9E9E
+
+/* CONTROL_EFUSE_2 */
+#define CONTROL_EFUSE_2_NMOS_PMOS_PTV_CODE_1 0x00ffc000
+
+/*
+ * Maximum number of entries we keep in our array of timing tables
+ * We need not keep all the speed bins supported by the device
+ * We need to keep timing tables for only the speed bins that we
+ * are interested in
+ */
+#define MAX_NUM_SPEEDBINS 4
+
+/* LPDDR2 Densities */
+#define LPDDR2_DENSITY_64Mb 0
+#define LPDDR2_DENSITY_128Mb 1
+#define LPDDR2_DENSITY_256Mb 2
+#define LPDDR2_DENSITY_512Mb 3
+#define LPDDR2_DENSITY_1Gb 4
+#define LPDDR2_DENSITY_2Gb 5
+#define LPDDR2_DENSITY_4Gb 6
+#define LPDDR2_DENSITY_8Gb 7
+#define LPDDR2_DENSITY_16Gb 8
+#define LPDDR2_DENSITY_32Gb 9
+
+/* LPDDR2 type */
+#define LPDDR2_TYPE_S4 0
+#define LPDDR2_TYPE_S2 1
+#define LPDDR2_TYPE_NVM 2
+
+/* LPDDR2 IO width */
+#define LPDDR2_IO_WIDTH_32 0
+#define LPDDR2_IO_WIDTH_16 1
+#define LPDDR2_IO_WIDTH_8 2
+
+/* Mode register numbers */
+#define LPDDR2_MR0 0
+#define LPDDR2_MR1 1
+#define LPDDR2_MR2 2
+#define LPDDR2_MR3 3
+#define LPDDR2_MR4 4
+#define LPDDR2_MR5 5
+#define LPDDR2_MR6 6
+#define LPDDR2_MR7 7
+#define LPDDR2_MR8 8
+#define LPDDR2_MR9 9
+#define LPDDR2_MR10 10
+#define LPDDR2_MR11 11
+#define LPDDR2_MR16 16
+#define LPDDR2_MR17 17
+#define LPDDR2_MR18 18
+
+/* MR0 */
+#define LPDDR2_MR0_DAI_SHIFT 0
+#define LPDDR2_MR0_DAI_MASK 1
+#define LPDDR2_MR0_DI_SHIFT 1
+#define LPDDR2_MR0_DI_MASK (1 << 1)
+#define LPDDR2_MR0_DNVI_SHIFT 2
+#define LPDDR2_MR0_DNVI_MASK (1 << 2)
+
+/* MR4 */
+#define MR4_SDRAM_REF_RATE_SHIFT 0
+#define MR4_SDRAM_REF_RATE_MASK 7
+#define MR4_TUF_SHIFT 7
+#define MR4_TUF_MASK (1 << 7)
+
+/* MR4 SDRAM Refresh Rate field values */
+#define SDRAM_TEMP_LESS_LOW_SHUTDOWN 0x0
+#define SDRAM_TEMP_LESS_4X_REFRESH_AND_TIMINGS 0x1
+#define SDRAM_TEMP_LESS_2X_REFRESH_AND_TIMINGS 0x2
+#define SDRAM_TEMP_NOMINAL 0x3
+#define SDRAM_TEMP_RESERVED_4 0x4
+#define SDRAM_TEMP_HIGH_DERATE_REFRESH 0x5
+#define SDRAM_TEMP_HIGH_DERATE_REFRESH_AND_TIMINGS 0x6
+#define SDRAM_TEMP_VERY_HIGH_SHUTDOWN 0x7
+
+#define LPDDR2_MANUFACTURER_SAMSUNG 1
+#define LPDDR2_MANUFACTURER_QIMONDA 2
+#define LPDDR2_MANUFACTURER_ELPIDA 3
+#define LPDDR2_MANUFACTURER_ETRON 4
+#define LPDDR2_MANUFACTURER_NANYA 5
+#define LPDDR2_MANUFACTURER_HYNIX 6
+#define LPDDR2_MANUFACTURER_MOSEL 7
+#define LPDDR2_MANUFACTURER_WINBOND 8
+#define LPDDR2_MANUFACTURER_ESMT 9
+#define LPDDR2_MANUFACTURER_SPANSION 11
+#define LPDDR2_MANUFACTURER_SST 12
+#define LPDDR2_MANUFACTURER_ZMOS 13
+#define LPDDR2_MANUFACTURER_INTEL 14
+#define LPDDR2_MANUFACTURER_NUMONYX 254
+#define LPDDR2_MANUFACTURER_MICRON 255
+
+/* MR8 register fields */
+#define MR8_TYPE_SHIFT 0x0
+#define MR8_TYPE_MASK 0x3
+#define MR8_DENSITY_SHIFT 0x2
+#define MR8_DENSITY_MASK (0xF << 0x2)
+#define MR8_IO_WIDTH_SHIFT 0x6
+#define MR8_IO_WIDTH_MASK (0x3 << 0x6)
+
+struct lpddr2_addressing {
+ u8 num_banks;
+ u8 t_REFI_us_x10;
+ u8 row_sz[2]; /* One entry each for x32 and x16 */
+ u8 col_sz[2]; /* One entry each for x32 and x16 */
+};
+
+/* Structure for timings from the DDR datasheet */
+struct lpddr2_ac_timings {
+ u32 max_freq;
+ u8 RL;
+ u8 tRPab;
+ u8 tRCD;
+ u8 tWR;
+ u8 tRASmin;
+ u8 tRRD;
+ u8 tWTRx2;
+ u8 tXSR;
+ u8 tXPx2;
+ u8 tRFCab;
+ u8 tRTPx2;
+ u8 tCKE;
+ u8 tCKESR;
+ u8 tZQCS;
+ u32 tZQCL;
+ u32 tZQINIT;
+ u8 tDQSCKMAXx2;
+ u8 tRASmax;
+ u8 tFAW;
+
+};
+
+/*
+ * Min tCK values for some of the parameters:
+ * If the calculated clock cycles for the respective parameter is
+ * less than the corresponding min tCK value, we need to set the min
+ * tCK value. This may happen at lower frequencies.
+ */
+struct lpddr2_min_tck {
+ u32 tRL;
+ u32 tRP_AB;
+ u32 tRCD;
+ u32 tWR;
+ u32 tRAS_MIN;
+ u32 tRRD;
+ u32 tWTR;
+ u32 tXP;
+ u32 tRTP;
+ u8 tCKE;
+ u32 tCKESR;
+ u32 tFAW;
+};
+
+struct lpddr2_device_details {
+ u8 type;
+ u8 density;
+ u8 io_width;
+ u8 manufacturer;
+};
+
+struct lpddr2_device_timings {
+ const struct lpddr2_ac_timings **ac_timings;
+ const struct lpddr2_min_tck *min_tck;
+};
+
+/* Details of the devices connected to each chip-select of an EMIF instance */
+struct emif_device_details {
+ const struct lpddr2_device_details *cs0_device_details;
+ const struct lpddr2_device_details *cs1_device_details;
+ const struct lpddr2_device_timings *cs0_device_timings;
+ const struct lpddr2_device_timings *cs1_device_timings;
+};
+
+/*
+ * Structure containing shadow of important registers in EMIF
+ * The calculation function fills in this structure to be later used for
+ * initialization and DVFS
+ */
+struct emif_regs {
+ u32 freq;
+ u32 sdram_config_init;
+ u32 sdram_config;
+ u32 ref_ctrl;
+ u32 sdram_tim1;
+ u32 sdram_tim2;
+ u32 sdram_tim3;
+ u32 read_idle_ctrl;
+ u32 zq_config;
+ u32 temp_alert_config;
+ u32 emif_ddr_phy_ctlr_1_init;
+ u32 emif_ddr_phy_ctlr_1;
+};
+
+/* assert macros */
+#if defined(DEBUG)
+#define emif_assert(c) ({ if (!(c)) for (;;); })
+#else
+#define emif_assert(c) ({ if (0) hang(); })
+#endif
+
+#ifdef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
+void emif_get_reg_dump(u32 emif_nr, const struct emif_regs **regs);
+void emif_get_dmm_regs(const struct dmm_lisa_map_regs **dmm_lisa_regs);
+#else
+void emif_get_device_details(u32 emif_nr,
+ struct lpddr2_device_details *cs0_device_details,
+ struct lpddr2_device_details *cs1_device_details);
+void emif_get_device_timings(u32 emif_nr,
+ const struct lpddr2_device_timings **cs0_device_timings,
+ const struct lpddr2_device_timings **cs1_device_timings);
+#endif
+
+#endif
diff --git a/arch/arm/include/asm/arch-omap4/mux_omap4.h b/arch/arm/include/asm/arch-omap4/mux_omap4.h
index 019574b..30bfad7 100644
--- a/arch/arm/include/asm/arch-omap4/mux_omap4.h
+++ b/arch/arm/include/asm/arch-omap4/mux_omap4.h
@@ -341,4 +341,5 @@
#define CONTROL_SPARE_R 0x0618
#define CONTROL_SPARE_R_C0 0x061C
+#define CONTROL_WKUP_PAD1_FREF_CLK4_REQ 0x4A31E05A
#endif /* _MUX_OMAP4_H_ */
diff --git a/arch/arm/include/asm/arch-omap4/omap4.h b/arch/arm/include/asm/arch-omap4/omap4.h
index a30bb33..9aad0e6 100644
--- a/arch/arm/include/asm/arch-omap4/omap4.h
+++ b/arch/arm/include/asm/arch-omap4/omap4.h
@@ -51,6 +51,20 @@
#define CONTROL_PADCONF_CORE (OMAP44XX_L4_CORE_BASE + 0x100000)
#define CONTROL_PADCONF_WKUP (OMAP44XX_L4_CORE_BASE + 0x31E000)
+/* LPDDR2 IO regs */
+#define LPDDR2_IO_REGS_BASE 0x4A100638
+
+#define CONTROL_EFUSE_2 0x4A100704
+
+/* CONTROL_ID_CODE */
+#define CONTROL_ID_CODE 0x4A002204
+
+#define OMAP4_CONTROL_ID_CODE_ES1_0 0x0B85202F
+#define OMAP4_CONTROL_ID_CODE_ES2_0 0x1B85202F
+#define OMAP4_CONTROL_ID_CODE_ES2_1 0x3B95C02F
+#define OMAP4_CONTROL_ID_CODE_ES2_2 0x4B95C02F
+#define OMAP4_CONTROL_ID_CODE_ES2_3 0x6B95C02F
+
/* UART */
#define UART1_BASE (OMAP44XX_L4_PER_BASE + 0x6a000)
#define UART2_BASE (OMAP44XX_L4_PER_BASE + 0x6c000)
@@ -70,12 +84,6 @@
/* GPMC */
#define OMAP44XX_GPMC_BASE 0x50000000
-/* DMM */
-#define OMAP44XX_DMM_BASE 0x4E000000
-#define DMM_LISA_MAP_BASE (OMAP44XX_DMM_BASE + 0x40)
-#define DMM_LISA_MAP_SYS_SIZE_MASK (7 << 20)
-#define DMM_LISA_MAP_SYS_SIZE_SHIFT 20
-#define DMM_LISA_MAP_SYS_ADDR_MASK (0xFF << 24)
/*
* Hardware Register Details
*/
@@ -119,13 +127,38 @@
/* base address for indirect vectors (internal boot mode) */
#define SRAM_ROM_VECT_BASE 0x4030D000
/* Temporary SRAM stack used while low level init is done */
-#define LOW_LEVEL_SRAM_STACK NON_SECURE_SRAM_END
+#define LOW_LEVEL_SRAM_STACK NON_SECURE_SRAM_END
+#define SRAM_SCRATCH_SPACE_ADDR NON_SECURE_SRAM_START
+/* SRAM scratch space entries */
+#define OMAP4_SRAM_SCRATCH_OMAP4_REV SRAM_SCRATCH_SPACE_ADDR
+#define OMAP4_SRAM_SCRATCH_EMIF_SIZE (SRAM_SCRATCH_SPACE_ADDR + 0x4)
+#define OMAP4_SRAM_SCRATCH_EMIF_T_NUM (SRAM_SCRATCH_SPACE_ADDR + 0xC)
+#define OMAP4_SRAM_SCRATCH_EMIF_T_DEN (SRAM_SCRATCH_SPACE_ADDR + 0x10)
+#define OMAP4_SRAM_SCRATCH_SPACE_END (SRAM_SCRATCH_SPACE_ADDR + 0x14)
-/*
- * OMAP4 real hardware:
- * TODO: Change this to the IDCODE in the hw regsiter
- */
-#define CPU_OMAP4430_ES10 1
-#define CPU_OMAP4430_ES20 2
+/* Silicon revisions */
+#define OMAP4430_SILICON_ID_INVALID 0xFFFFFFFF
+#define OMAP4430_ES1_0 0x44300100
+#define OMAP4430_ES2_0 0x44300200
+#define OMAP4430_ES2_1 0x44300210
+#define OMAP4430_ES2_2 0x44300220
+#define OMAP4430_ES2_3 0x44300230
+#define OMAP4460_ES1_0 0x44600100
+
+/* ROM code defines */
+/* Boot device */
+#define BOOT_DEVICE_MASK 0xFF
+#define BOOT_DEVICE_OFFSET 0x8
+#define DEV_DESC_PTR_OFFSET 0x4
+#define DEV_DATA_PTR_OFFSET 0x18
+#define BOOT_MODE_OFFSET 0x8
+
+/* GPIO */
+#define OMAP44XX_GPIO1_BASE 0x4A310000
+#define OMAP44XX_GPIO2_BASE 0x48055000
+#define OMAP44XX_GPIO3_BASE 0x48057000
+#define OMAP44XX_GPIO4_BASE 0x48059000
+#define OMAP44XX_GPIO5_BASE 0x4805B000
+#define OMAP44XX_GPIO6_BASE 0x4805D000
#endif
diff --git a/arch/arm/include/asm/arch-omap4/sys_proto.h b/arch/arm/include/asm/arch-omap4/sys_proto.h
index 4fa4f4b..a81f8e5 100644
--- a/arch/arm/include/asm/arch-omap4/sys_proto.h
+++ b/arch/arm/include/asm/arch-omap4/sys_proto.h
@@ -22,21 +22,89 @@
#define _SYS_PROTO_H_
#include <asm/arch/omap4.h>
+#include <asm/arch/clocks.h>
#include <asm/io.h>
+#include <asm/omap_common.h>
+#include <asm/arch/mux_omap4.h>
struct omap_sysinfo {
char *board_string;
};
+extern const struct omap_sysinfo sysinfo;
+
+extern struct omap4_prcm_regs *const prcm;
void gpmc_init(void);
void watchdog_init(void);
u32 get_device_type(void);
-void set_muxconf_regs(void);
+void do_set_mux(u32 base, struct pad_conf_entry const *array, int size);
+void set_muxconf_regs_non_essential(void);
void sr32(void *, u32, u32, u32);
u32 wait_on_value(u32, u32, void *, u32);
void sdelay(unsigned long);
void set_pl310_ctrl_reg(u32 val);
+void omap_rev_string(char *omap4_rev_string);
+void setup_clocks_for_console(void);
+void prcm_init(void);
+void bypass_dpll(u32 *const base);
+void freq_update_core(void);
+u32 get_sys_clk_freq(void);
+u32 omap4_ddr_clk(void);
+void cancel_out(u32 *num, u32 *den, u32 den_limit);
+void sdram_init(void);
+u32 omap4_sdram_size(void);
-extern const struct omap_sysinfo sysinfo;
+static inline u32 running_from_sdram(void)
+{
+ u32 pc;
+ asm volatile ("mov %0, pc" : "=r" (pc));
+ return ((pc >= OMAP44XX_DRAM_ADDR_SPACE_START) &&
+ (pc < OMAP44XX_DRAM_ADDR_SPACE_END));
+}
+
+static inline u8 uboot_loaded_by_spl(void)
+{
+ /*
+ * Configuration Header is not supported yet, so u-boot init running
+ * from SDRAM implies that it was loaded by SPL. When this situation
+ * changes one of these approaches could be taken:
+ * i. Pass a magic from SPL to U-Boot and U-Boot save it at a known
+ * location.
+ * ii. Check the OPP. CH can support only 50% OPP while SPL initializes
+ * the DPLLs at 100% OPP.
+ */
+ return running_from_sdram();
+}
+/*
+ * The basic hardware init of OMAP(s_init()) can happen in 4
+ * different contexts:
+ * 1. SPL running from SRAM
+ * 2. U-Boot running from FLASH
+ * 3. Non-XIP U-Boot loaded to SDRAM by SPL
+ * 4. Non-XIP U-Boot loaded to SDRAM by ROM code using the
+ * Configuration Header feature
+ *
+ * This function finds this context.
+ * Defining as inline may help in compiling out unused functions in SPL
+ */
+static inline u32 omap4_hw_init_context(void)
+{
+#ifdef CONFIG_SPL_BUILD
+ return OMAP_INIT_CONTEXT_SPL;
+#else
+ if (uboot_loaded_by_spl())
+ return OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL;
+ else if (running_from_sdram())
+ return OMAP_INIT_CONTEXT_UBOOT_AFTER_CH;
+ else
+ return OMAP_INIT_CONTEXT_UBOOT_FROM_NOR;
+#endif
+}
+
+static inline u32 omap_revision(void)
+{
+ extern u32 *const omap4_revision;
+ return *omap4_revision;
+}
#endif
diff --git a/arch/arm/include/asm/armv7.h b/arch/arm/include/asm/armv7.h
index 88b9c62..9adc563 100644
--- a/arch/arm/include/asm/armv7.h
+++ b/arch/arm/include/asm/armv7.h
@@ -25,6 +25,12 @@
#define ARMV7_H
#include <linux/types.h>
+/* Cortex-A9 revisions */
+#define MIDR_CORTEX_A9_R0P1 0x410FC091
+#define MIDR_CORTEX_A9_R1P2 0x411FC092
+#define MIDR_CORTEX_A9_R1P3 0x411FC093
+#define MIDR_CORTEX_A9_R2P10 0x412FC09A
+
/* CCSIDR */
#define CCSIDR_LINE_SIZE_OFFSET 0
#define CCSIDR_LINE_SIZE_MASK 0x7
diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h
new file mode 100644
index 0000000..d3cb857
--- /dev/null
+++ b/arch/arm/include/asm/omap_common.h
@@ -0,0 +1,56 @@
+/*
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ *
+ * Aneesh V <aneesh@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef _OMAP_COMMON_H_
+#define _OMAP_COMMON_H_
+
+/* Max value for DPLL multiplier M */
+#define OMAP_DPLL_MAX_N 127
+
+/* HW Init Context */
+#define OMAP_INIT_CONTEXT_SPL 0
+#define OMAP_INIT_CONTEXT_UBOOT_FROM_NOR 1
+#define OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL 2
+#define OMAP_INIT_CONTEXT_UBOOT_AFTER_CH 3
+
+void preloader_console_init(void);
+
+/* Boot device */
+#define BOOT_DEVICE_NONE 0
+#define BOOT_DEVICE_XIP 1
+#define BOOT_DEVICE_XIPWAIT 2
+#define BOOT_DEVICE_NAND 3
+#define BOOT_DEVICE_ONE_NAND 4
+#define BOOT_DEVICE_MMC1 5
+#define BOOT_DEVICE_MMC2 6
+
+/* Boot type */
+#define MMCSD_MODE_UNDEFINED 0
+#define MMCSD_MODE_RAW 1
+#define MMCSD_MODE_FAT 2
+
+u32 omap_boot_device(void);
+u32 omap_boot_mode(void);
+
+#endif /* _OMAP_COMMON_H_ */
diff --git a/arch/arm/include/asm/arch-omap3/gpio.h b/arch/arm/include/asm/omap_gpio.h
similarity index 67%
rename from arch/arm/include/asm/arch-omap3/gpio.h
rename to arch/arm/include/asm/omap_gpio.h
index 30f633c..3089e1c 100644
--- a/arch/arm/include/asm/arch-omap3/gpio.h
+++ b/arch/arm/include/asm/omap_gpio.h
@@ -38,36 +38,15 @@
#ifndef _GPIO_H
#define _GPIO_H
-#define OMAP24XX_GPIO_REVISION 0x0000
-#define OMAP24XX_GPIO_SYSCONFIG 0x0010
-#define OMAP24XX_GPIO_SYSSTATUS 0x0014
-#define OMAP24XX_GPIO_IRQSTATUS1 0x0018
-#define OMAP24XX_GPIO_IRQSTATUS2 0x0028
-#define OMAP24XX_GPIO_IRQENABLE2 0x002c
-#define OMAP24XX_GPIO_IRQENABLE1 0x001c
-#define OMAP24XX_GPIO_WAKE_EN 0x0020
-#define OMAP24XX_GPIO_CTRL 0x0030
-#define OMAP24XX_GPIO_OE 0x0034
-#define OMAP24XX_GPIO_DATAIN 0x0038
-#define OMAP24XX_GPIO_DATAOUT 0x003c
-#define OMAP24XX_GPIO_LEVELDETECT0 0x0040
-#define OMAP24XX_GPIO_LEVELDETECT1 0x0044
-#define OMAP24XX_GPIO_RISINGDETECT 0x0048
-#define OMAP24XX_GPIO_FALLINGDETECT 0x004c
-#define OMAP24XX_GPIO_DEBOUNCE_EN 0x0050
-#define OMAP24XX_GPIO_DEBOUNCE_VAL 0x0054
-#define OMAP24XX_GPIO_CLEARIRQENABLE1 0x0060
-#define OMAP24XX_GPIO_SETIRQENABLE1 0x0064
-#define OMAP24XX_GPIO_CLEARWKUENA 0x0080
-#define OMAP24XX_GPIO_SETWKUENA 0x0084
-#define OMAP24XX_GPIO_CLEARDATAOUT 0x0090
-#define OMAP24XX_GPIO_SETDATAOUT 0x0094
+#include <asm/arch/cpu.h>
struct gpio_bank {
void *base;
int method;
};
+extern const struct gpio_bank *const omap_gpio_bank;
+
#define METHOD_GPIO_24XX 4
/* This is the interface */
diff --git a/arch/arm/lib/board.c b/arch/arm/lib/board.c
index 90709d0..14a56f6 100644
--- a/arch/arm/lib/board.c
+++ b/arch/arm/lib/board.c
@@ -84,26 +84,28 @@
************************************************************************
* May be supplied by boards if desired
*/
-void inline __coloured_LED_init (void) {}
-void coloured_LED_init (void) __attribute__((weak, alias("__coloured_LED_init")));
-void inline __red_LED_on (void) {}
-void red_LED_on (void) __attribute__((weak, alias("__red_LED_on")));
-void inline __red_LED_off(void) {}
+inline void __coloured_LED_init(void) {}
+void coloured_LED_init(void)
+ __attribute__((weak, alias("__coloured_LED_init")));
+inline void __red_LED_on(void) {}
+void red_LED_on(void) __attribute__((weak, alias("__red_LED_on")));
+inline void __red_LED_off(void) {}
void red_LED_off(void) __attribute__((weak, alias("__red_LED_off")));
-void inline __green_LED_on(void) {}
+inline void __green_LED_on(void) {}
void green_LED_on(void) __attribute__((weak, alias("__green_LED_on")));
-void inline __green_LED_off(void) {}
+inline void __green_LED_off(void) {}
void green_LED_off(void) __attribute__((weak, alias("__green_LED_off")));
-void inline __yellow_LED_on(void) {}
+inline void __yellow_LED_on(void) {}
void yellow_LED_on(void) __attribute__((weak, alias("__yellow_LED_on")));
-void inline __yellow_LED_off(void) {}
+inline void __yellow_LED_off(void) {}
void yellow_LED_off(void) __attribute__((weak, alias("__yellow_LED_off")));
-void inline __blue_LED_on(void) {}
+inline void __blue_LED_on(void) {}
void blue_LED_on(void) __attribute__((weak, alias("__blue_LED_on")));
-void inline __blue_LED_off(void) {}
+inline void __blue_LED_off(void) {}
void blue_LED_off(void) __attribute__((weak, alias("__blue_LED_off")));
-/************************************************************************
+/*
+ ************************************************************************
* Init Utilities *
************************************************************************
* Some of this code should be moved into the core functions,
@@ -114,30 +116,30 @@
#if defined(CONFIG_ARM_DCC) && !defined(CONFIG_BAUDRATE)
#define CONFIG_BAUDRATE 115200
#endif
-static int init_baudrate (void)
+static int init_baudrate(void)
{
char tmp[64]; /* long enough for environment variables */
- int i = getenv_f("baudrate", tmp, sizeof (tmp));
+ int i = getenv_f("baudrate", tmp, sizeof(tmp));
gd->baudrate = (i > 0)
- ? (int) simple_strtoul (tmp, NULL, 10)
+ ? (int) simple_strtoul(tmp, NULL, 10)
: CONFIG_BAUDRATE;
return (0);
}
-static int display_banner (void)
+static int display_banner(void)
{
- printf ("\n\n%s\n\n", version_string);
- debug ("U-Boot code: %08lX -> %08lX BSS: -> %08lX\n",
+ printf("\n\n%s\n\n", version_string);
+ debug("U-Boot code: %08lX -> %08lX BSS: -> %08lX\n",
_TEXT_BASE,
- _bss_start_ofs+_TEXT_BASE, _bss_end_ofs+_TEXT_BASE);
+ _bss_start_ofs + _TEXT_BASE, _bss_end_ofs + _TEXT_BASE);
#ifdef CONFIG_MODEM_SUPPORT
- debug ("Modem Support enabled\n");
+ debug("Modem Support enabled\n");
#endif
#ifdef CONFIG_USE_IRQ
- debug ("IRQ Stack: %08lx\n", IRQ_STACK_START);
- debug ("FIQ Stack: %08lx\n", FIQ_STACK_START);
+ debug("IRQ Stack: %08lx\n", IRQ_STACK_START);
+ debug("FIQ Stack: %08lx\n", FIQ_STACK_START);
#endif
return (0);
@@ -150,23 +152,23 @@
* gives a simple yet clear indication which part of the
* initialization if failing.
*/
-static int display_dram_config (void)
+static int display_dram_config(void)
{
int i;
#ifdef DEBUG
- puts ("RAM Configuration:\n");
+ puts("RAM Configuration:\n");
- for(i=0; i<CONFIG_NR_DRAM_BANKS; i++) {
- printf ("Bank #%d: %08lx ", i, gd->bd->bi_dram[i].start);
- print_size (gd->bd->bi_dram[i].size, "\n");
+ for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
+ printf("Bank #%d: %08lx ", i, gd->bd->bi_dram[i].start);
+ print_size(gd->bd->bi_dram[i].size, "\n");
}
#else
ulong size = 0;
- for (i=0; i<CONFIG_NR_DRAM_BANKS; i++) {
+ for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
size += gd->bd->bi_dram[i].size;
- }
+
puts("DRAM: ");
print_size(size, "\n");
#endif
@@ -175,11 +177,11 @@
}
#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
-static int init_func_i2c (void)
+static int init_func_i2c(void)
{
- puts ("I2C: ");
- i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
- puts ("ready\n");
+ puts("I2C: ");
+ i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+ puts("ready\n");
return (0);
}
#endif
@@ -218,7 +220,7 @@
*/
typedef int (init_fnc_t) (void);
-int print_cpuinfo (void);
+int print_cpuinfo(void);
void __dram_init_banksize(void)
{
@@ -257,7 +259,7 @@
NULL,
};
-void board_init_f (ulong bootflag)
+void board_init_f(ulong bootflag)
{
bd_t *bd;
init_fnc_t **init_fnc_ptr;
@@ -269,7 +271,7 @@
/* compiler optimization barrier needed for GCC >= 3.4 */
__asm__ __volatile__("": : :"memory");
- memset ((void*)gd, 0, sizeof (gd_t));
+ memset((void *)gd, 0, sizeof(gd_t));
gd->mon_len = _bss_end_ofs;
@@ -283,11 +285,11 @@
}
}
- debug ("monitor len: %08lX\n", gd->mon_len);
+ debug("monitor len: %08lX\n", gd->mon_len);
/*
* Ram is setup, size stored in gd !!
*/
- debug ("ramsize: %08lX\n", gd->ram_size);
+ debug("ramsize: %08lX\n", gd->ram_size);
#if defined(CONFIG_SYS_MEM_TOP_HIDE)
/*
* Subtract specified amount of memory to hide so that it won't
@@ -308,7 +310,8 @@
#ifndef CONFIG_ALT_LB_ADDR
/* reserve kernel log buffer */
addr -= (LOGBUFF_RESERVE);
- debug ("Reserving %dk for kernel logbuffer at %08lx\n", LOGBUFF_LEN, addr);
+ debug("Reserving %dk for kernel logbuffer at %08lx\n", LOGBUFF_LEN,
+ addr);
#endif
#endif
@@ -316,10 +319,11 @@
/*
* reserve protected RAM
*/
- i = getenv_r ("pram", (char *)tmp, sizeof (tmp));
- reg = (i > 0) ? simple_strtoul ((const char *)tmp, NULL, 10) : CONFIG_PRAM;
+ i = getenv_r("pram", (char *)tmp, sizeof(tmp));
+ reg = (i > 0) ? simple_strtoul((const char *)tmp, NULL, 10) :
+ CONFIG_PRAM;
addr -= (reg << 10); /* size is in kB */
- debug ("Reserving %ldk for protected RAM at %08lx\n", reg, addr);
+ debug("Reserving %ldk for protected RAM at %08lx\n", reg, addr);
#endif /* CONFIG_PRAM */
#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
@@ -330,19 +334,19 @@
addr &= ~(0x10000 - 1);
gd->tlb_addr = addr;
- debug ("TLB table at: %08lx\n", addr);
+ debug("TLB table at: %08lx\n", addr);
#endif
/* round down to next 4 kB limit */
addr &= ~(4096 - 1);
- debug ("Top of RAM usable for U-Boot at: %08lx\n", addr);
+ debug("Top of RAM usable for U-Boot at: %08lx\n", addr);
#ifdef CONFIG_LCD
#ifdef CONFIG_FB_ADDR
gd->fb_base = CONFIG_FB_ADDR;
#else
/* reserve memory for LCD display (always full pages) */
- addr = lcd_setmem (addr);
+ addr = lcd_setmem(addr);
gd->fb_base = addr;
#endif /* CONFIG_FB_ADDR */
#endif /* CONFIG_LCD */
@@ -354,14 +358,14 @@
addr -= gd->mon_len;
addr &= ~(4096 - 1);
- debug ("Reserving %ldk for U-Boot at: %08lx\n", gd->mon_len >> 10, addr);
+ debug("Reserving %ldk for U-Boot at: %08lx\n", gd->mon_len >> 10, addr);
#ifndef CONFIG_SPL_BUILD
/*
* reserve memory for malloc() arena
*/
addr_sp = addr - TOTAL_MALLOC_LEN;
- debug ("Reserving %dk for malloc() at: %08lx\n",
+ debug("Reserving %dk for malloc() at: %08lx\n",
TOTAL_MALLOC_LEN >> 10, addr_sp);
/*
* (permanently) allocate a Board Info struct
@@ -370,18 +374,18 @@
addr_sp -= sizeof (bd_t);
bd = (bd_t *) addr_sp;
gd->bd = bd;
- debug ("Reserving %zu Bytes for Board Info at: %08lx\n",
+ debug("Reserving %zu Bytes for Board Info at: %08lx\n",
sizeof (bd_t), addr_sp);
addr_sp -= sizeof (gd_t);
id = (gd_t *) addr_sp;
- debug ("Reserving %zu Bytes for Global Data at: %08lx\n",
+ debug("Reserving %zu Bytes for Global Data at: %08lx\n",
sizeof (gd_t), addr_sp);
/* setup stackpointer for exeptions */
gd->irq_sp = addr_sp;
#ifdef CONFIG_USE_IRQ
addr_sp -= (CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ);
- debug ("Reserving %zu Bytes for IRQ stack at: %08lx\n",
+ debug("Reserving %zu Bytes for IRQ stack at: %08lx\n",
CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ, addr_sp);
#endif
/* leave 3 words for abort-stack */
@@ -394,11 +398,11 @@
gd->irq_sp = addr_sp;
#endif
- debug ("New Stack Pointer is: %08lx\n", addr_sp);
+ debug("New Stack Pointer is: %08lx\n", addr_sp);
#ifdef CONFIG_POST
post_bootmode_init();
- post_run (NULL, POST_ROM | post_bootmode_get(0));
+ post_run(NULL, POST_ROM | post_bootmode_get(0));
#endif
gd->bd->bi_baudrate = gd->baudrate;
@@ -409,10 +413,10 @@
gd->relocaddr = addr;
gd->start_addr_sp = addr_sp;
gd->reloc_off = addr - _TEXT_BASE;
- debug ("relocation Offset is: %08lx\n", gd->reloc_off);
- memcpy (id, (void *)gd, sizeof (gd_t));
+ debug("relocation Offset is: %08lx\n", gd->reloc_off);
+ memcpy(id, (void *)gd, sizeof(gd_t));
- relocate_code (addr_sp, id, addr);
+ relocate_code(addr_sp, id, addr);
/* NOTREACHED - relocate_code() does not return */
}
@@ -421,7 +425,8 @@
static char *failed = "*** failed ***\n";
#endif
-/************************************************************************
+/*
+ ************************************************************************
*
* This is the next part if the initialization sequence: we are now
* running from RAM and have a "normal" C environment, i. e. global
@@ -431,7 +436,7 @@
************************************************************************
*/
-void board_init_r (gd_t *id, ulong dest_addr)
+void board_init_r(gd_t *id, ulong dest_addr)
{
char *s;
bd_t *bd;
@@ -452,20 +457,20 @@
*/
dcache_enable();
- debug ("monitor flash len: %08lX\n", monitor_flash_len);
+ debug("monitor flash len: %08lX\n", monitor_flash_len);
board_init(); /* Setup chipselects */
#ifdef CONFIG_SERIAL_MULTI
serial_initialize();
#endif
- debug ("Now running in RAM - U-Boot at: %08lx\n", dest_addr);
+ debug("Now running in RAM - U-Boot at: %08lx\n", dest_addr);
#ifdef CONFIG_LOGBUFFER
- logbuff_init_ptrs ();
+ logbuff_init_ptrs();
#endif
#ifdef CONFIG_POST
- post_output_backlog ();
+ post_output_backlog();
#endif
/* The Malloc area is immediately below the monitor copy in DRAM */
@@ -473,34 +478,35 @@
mem_malloc_init (malloc_start, TOTAL_MALLOC_LEN);
#if !defined(CONFIG_SYS_NO_FLASH)
- puts ("Flash: ");
+ puts("Flash: ");
- if ((flash_size = flash_init ()) > 0) {
+ flash_size = flash_init();
+ if (flash_size > 0) {
# ifdef CONFIG_SYS_FLASH_CHECKSUM
- print_size (flash_size, "");
+ print_size(flash_size, "");
/*
* Compute and print flash CRC if flashchecksum is set to 'y'
*
* NOTE: Maybe we should add some WATCHDOG_RESET()? XXX
*/
- s = getenv ("flashchecksum");
+ s = getenv("flashchecksum");
if (s && (*s == 'y')) {
- printf (" CRC: %08X",
- crc32 (0, (const unsigned char *) CONFIG_SYS_FLASH_BASE, flash_size)
- );
+ printf(" CRC: %08X", crc32(0,
+ (const unsigned char *) CONFIG_SYS_FLASH_BASE,
+ flash_size));
}
- putc ('\n');
+ putc('\n');
# else /* !CONFIG_SYS_FLASH_CHECKSUM */
- print_size (flash_size, "\n");
+ print_size(flash_size, "\n");
# endif /* CONFIG_SYS_FLASH_CHECKSUM */
} else {
- puts (failed);
- hang ();
+ puts(failed);
+ hang();
}
#endif
#if defined(CONFIG_CMD_NAND)
- puts ("NAND: ");
+ puts("NAND: ");
nand_init(); /* go init the NAND */
#endif
@@ -519,44 +525,44 @@
#endif
/* initialize environment */
- env_relocate ();
+ env_relocate();
#if defined(CONFIG_CMD_PCI) || defined(CONFIG_PCI)
arm_pci_init();
#endif
/* IP Address */
- gd->bd->bi_ip_addr = getenv_IPaddr ("ipaddr");
+ gd->bd->bi_ip_addr = getenv_IPaddr("ipaddr");
- stdio_init (); /* get the devices list going. */
+ stdio_init(); /* get the devices list going. */
- jumptable_init ();
+ jumptable_init();
#if defined(CONFIG_API)
/* Initialize API */
- api_init ();
+ api_init();
#endif
- console_init_r (); /* fully init console as a device */
+ console_init_r(); /* fully init console as a device */
#if defined(CONFIG_ARCH_MISC_INIT)
/* miscellaneous arch dependent initialisations */
- arch_misc_init ();
+ arch_misc_init();
#endif
#if defined(CONFIG_MISC_INIT_R)
/* miscellaneous platform dependent initialisations */
- misc_init_r ();
+ misc_init_r();
#endif
/* set up exceptions */
- interrupt_init ();
+ interrupt_init();
/* enable exceptions */
- enable_interrupts ();
+ enable_interrupts();
/* Perform network card initialisation if necessary */
#if defined(CONFIG_DRIVER_SMC91111) || defined (CONFIG_DRIVER_LAN91C96)
/* XXX: this needs to be moved to board init */
- if (getenv ("ethaddr")) {
+ if (getenv("ethaddr")) {
uchar enetaddr[6];
eth_getenv_enetaddr("ethaddr", enetaddr);
smc_set_mac_addr(enetaddr);
@@ -564,17 +570,17 @@
#endif /* CONFIG_DRIVER_SMC91111 || CONFIG_DRIVER_LAN91C96 */
/* Initialize from environment */
- if ((s = getenv ("loadaddr")) != NULL) {
- load_addr = simple_strtoul (s, NULL, 16);
- }
+ s = getenv("loadaddr");
+ if (s != NULL)
+ load_addr = simple_strtoul(s, NULL, 16);
#if defined(CONFIG_CMD_NET)
- if ((s = getenv ("bootfile")) != NULL) {
- copy_filename (BootFile, s, sizeof (BootFile));
- }
+ s = getenv("bootfile");
+ if (s != NULL)
+ copy_filename(BootFile, s, sizeof(BootFile));
#endif
#ifdef BOARD_LATE_INIT
- board_late_init ();
+ board_late_init();
#endif
#ifdef CONFIG_BITBANGMII
@@ -582,17 +588,17 @@
#endif
#if defined(CONFIG_CMD_NET)
#if defined(CONFIG_NET_MULTI)
- puts ("Net: ");
+ puts("Net: ");
#endif
eth_initialize(gd->bd);
#if defined(CONFIG_RESET_PHY_R)
- debug ("Reset Ethernet PHY\n");
+ debug("Reset Ethernet PHY\n");
reset_phy();
#endif
#endif
#ifdef CONFIG_POST
- post_run (NULL, POST_RAM | post_bootmode_get(0));
+ post_run(NULL, POST_RAM | post_bootmode_get(0));
#endif
#if defined(CONFIG_PRAM) || defined(CONFIG_LOGBUFFER)
@@ -606,35 +612,35 @@
#ifdef CONFIG_PRAM
char *s;
- if ((s = getenv ("pram")) != NULL) {
- pram = simple_strtoul (s, NULL, 10);
- } else {
+ s = getenv("pram");
+ if (s != NULL)
+ pram = simple_strtoul(s, NULL, 10);
+ else
pram = CONFIG_PRAM;
- }
#else
- pram=0;
+ pram = 0;
#endif
#ifdef CONFIG_LOGBUFFER
#ifndef CONFIG_ALT_LB_ADDR
/* Also take the logbuffer into account (pram is in kB) */
- pram += (LOGBUFF_LEN+LOGBUFF_OVERHEAD)/1024;
+ pram += (LOGBUFF_LEN + LOGBUFF_OVERHEAD) / 1024;
#endif
#endif
- sprintf ((char *)memsz, "%ldk", (bd->bi_memsize / 1024) - pram);
- setenv ("mem", (char *)memsz);
+ sprintf((char *)memsz, "%ldk", (bd->bi_memsize / 1024) - pram);
+ setenv("mem", (char *)memsz);
}
#endif
/* main_loop() can return to retry autoboot, if so just run it again. */
for (;;) {
- main_loop ();
+ main_loop();
}
/* NOTREACHED - no way out of command loop except booting */
}
-void hang (void)
+void hang(void)
{
- puts ("### ERROR ### Please RESET the board ###\n");
+ puts("### ERROR ### Please RESET the board ###\n");
for (;;);
}
diff --git a/board/Marvell/gplugd/Makefile b/board/Marvell/gplugd/Makefile
new file mode 100644
index 0000000..2d8bba0
--- /dev/null
+++ b/board/Marvell/gplugd/Makefile
@@ -0,0 +1,57 @@
+#
+# (C) Copyright 2011
+# eInfochips Ltd. <www.einfochips.com>
+# Written-by: Ajay Bhargav <ajay.bhargav@einfochips.com>
+#
+# Based on Aspenite:
+# (C) Copyright 2010
+# Marvell Semiconductor <www.marvell.com>
+# Written-by: Prafulla Wadaskar <prafulla@marvell.com>
+# Contributor: Mahavir Jain <mjain@marvell.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+# MA 02110-1301 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).o
+
+COBJS := gplugd.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/Marvell/gplugd/gplugd.c b/board/Marvell/gplugd/gplugd.c
new file mode 100644
index 0000000..dc7d89d
--- /dev/null
+++ b/board/Marvell/gplugd/gplugd.c
@@ -0,0 +1,62 @@
+/*
+ * (C) Copyright 2011
+ * eInfochips Ltd. <www.einfochips.com>
+ * Written-by: Ajay Bhargav <ajay.bhargav@einfochips.com>
+ *
+ * Based on Aspenite:
+ * (C) Copyright 2010
+ * Marvell Semiconductor <www.marvell.com>
+ * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
+ * Contributor: Mahavir Jain <mjain@marvell.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#include <common.h>
+#include <mvmfp.h>
+#include <asm/arch/mfp.h>
+#include <asm/arch/armada100.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int board_early_init_f(void)
+{
+ u32 mfp_cfg[] = {
+ /* I2C */
+ MFP105_CI2C_SDA,
+ MFP106_CI2C_SCL,
+
+ /* Enable Console on UART3 */
+ MFPO8_UART3_TXD,
+ MFPO9_UART3_RXD,
+ MFP_EOC /*End of configuration*/
+ };
+ /* configure MFP's */
+ mfp_config(mfp_cfg);
+ return 0;
+}
+
+int board_init(void)
+{
+ /* arch number of Board */
+ gd->bd->bi_arch_number = MACH_TYPE_SHEEVAD;
+ /* adress of boot parameters */
+ gd->bd->bi_boot_params = armd1_sdram_base(0) + 0x100;
+ return 0;
+}
diff --git a/board/armltd/versatile/config.mk b/board/armltd/versatile/config.mk
deleted file mode 100644
index 8b57af1..0000000
--- a/board/armltd/versatile/config.mk
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# image should be loaded at 0x01000000
-#
-
-CONFIG_SYS_TEXT_BASE = 0x01000000
diff --git a/board/armltd/versatile/versatile.c b/board/armltd/versatile/versatile.c
index 6e836dd..ee8cb5e 100644
--- a/board/armltd/versatile/versatile.c
+++ b/board/armltd/versatile/versatile.c
@@ -51,7 +51,7 @@
* Miscellaneous platform dependent initialisations
*/
-int board_init (void)
+int board_early_init_f (void)
{
/*
* set clock frequency:
@@ -62,6 +62,11 @@
((VERSATILE_TIMCLK << VERSATILE_TIMER1_EnSel) | (VERSATILE_TIMCLK << VERSATILE_TIMER2_EnSel) |
(VERSATILE_TIMCLK << VERSATILE_TIMER3_EnSel) | (VERSATILE_TIMCLK << VERSATILE_TIMER4_EnSel));
+ return 0;
+}
+
+int board_init (void)
+{
/* arch number of Versatile Board */
gd->bd->bi_arch_number = MACH_TYPE_VERSATILE_PB;
@@ -88,6 +93,9 @@
******************************/
int dram_init (void)
{
+ /* dram_init must store complete ramsize in gd->ram_size */
+ gd->ram_size = get_ram_size((volatile void *)CONFIG_SYS_SDRAM_BASE,
+ PHYS_SDRAM_1_SIZE);
return 0;
}
diff --git a/board/atmel/at91sam9261ek/at91sam9261ek.c b/board/atmel/at91sam9261ek/at91sam9261ek.c
index de5cfae..b6c7d9e 100644
--- a/board/atmel/at91sam9261ek/at91sam9261ek.c
+++ b/board/atmel/at91sam9261ek/at91sam9261ek.c
@@ -23,6 +23,7 @@
*/
#include <common.h>
+#include <asm/io.h>
#include <asm/arch/at91sam9261.h>
#include <asm/arch/at91sam9261_matrix.h>
#include <asm/arch/at91sam9_smc.h>
@@ -31,7 +32,6 @@
#include <asm/arch/at91_rstc.h>
#include <asm/arch/clk.h>
#include <asm/arch/gpio.h>
-#include <asm/arch/io.h>
#include <lcd.h>
#include <atmel_lcdc.h>
#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_DRIVER_DM9000)
@@ -49,44 +49,48 @@
#ifdef CONFIG_CMD_NAND
static void at91sam9261ek_nand_hw_init(void)
{
+ struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC;
+ struct at91_matrix *matrix = (struct at91_matrix *)ATMEL_BASE_MATRIX;
+ struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
unsigned long csa;
/* Enable CS3 */
- csa = at91_sys_read(AT91_MATRIX_EBICSA);
- at91_sys_write(AT91_MATRIX_EBICSA,
- csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
+ csa = readl(&matrix->ebicsa);
+ csa |= AT91_MATRIX_CS3A_SMC_SMARTMEDIA;
+
+ writel(csa, &matrix->ebicsa);
/* Configure SMC CS3 for NAND/SmartMedia */
#ifdef CONFIG_AT91SAM9G10EK
- at91_sys_write(AT91_SMC_SETUP(3),
- AT91_SMC_NWESETUP_(2) | AT91_SMC_NCS_WRSETUP_(0) |
- AT91_SMC_NRDSETUP_(2) | AT91_SMC_NCS_RDSETUP_(0));
- at91_sys_write(AT91_SMC_PULSE(3),
- AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(7) |
- AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(7));
- at91_sys_write(AT91_SMC_CYCLE(3),
- AT91_SMC_NWECYCLE_(7) | AT91_SMC_NRDCYCLE_(7));
+ writel(AT91_SMC_SETUP_NWE(2) | AT91_SMC_SETUP_NCS_WR(0) |
+ AT91_SMC_SETUP_NRD(2) | AT91_SMC_SETUP_NCS_RD(0),
+ &smc->cs[3].setup);
+ writel(AT91_SMC_PULSE_NWE(3) | AT91_SMC_PULSE_NCS_WR(7) |
+ AT91_SMC_PULSE_NRD(3) | AT91_SMC_PULSE_NCS_RD(7),
+ &smc->cs[3].pulse);
+ writel(AT91_SMC_CYCLE_NWE(7) | AT91_SMC_CYCLE_NRD(7),
+ &smc->cs[3].cycle);
#else
- at91_sys_write(AT91_SMC_SETUP(3),
- AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0) |
- AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0));
- at91_sys_write(AT91_SMC_PULSE(3),
- AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3) |
- AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3));
- at91_sys_write(AT91_SMC_CYCLE(3),
- AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5));
+ writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(0) |
+ AT91_SMC_SETUP_NRD(1) | AT91_SMC_SETUP_NCS_RD(0),
+ &smc->cs[3].setup);
+ writel(AT91_SMC_PULSE_NWE(3) | AT91_SMC_PULSE_NCS_WR(3) |
+ AT91_SMC_PULSE_NRD(3) | AT91_SMC_PULSE_NCS_RD(3),
+ &smc->cs[3].pulse);
+ writel(AT91_SMC_CYCLE_NWE(5) | AT91_SMC_CYCLE_NRD(5),
+ &smc->cs[3].cycle);
#endif
- at91_sys_write(AT91_SMC_MODE(3),
- AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
- AT91_SMC_EXNWMODE_DISABLE |
+ writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |
+ AT91_SMC_MODE_EXNW_DISABLE |
#ifdef CONFIG_SYS_NAND_DBW_16
- AT91_SMC_DBW_16 |
+ AT91_SMC_MODE_DBW_16 |
#else /* CONFIG_SYS_NAND_DBW_8 */
- AT91_SMC_DBW_8 |
+ AT91_SMC_MODE_DBW_8 |
#endif
- AT91_SMC_TDF_(2));
+ AT91_SMC_MODE_TDF_CYCLE(2),
+ &smc->cs[3].mode);
- at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9261_ID_PIOC);
+ writel(1 << ATMEL_ID_PIOC, &pmc->pcer);
/* Configure RDY/BSY */
at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1);
@@ -102,35 +106,37 @@
#ifdef CONFIG_DRIVER_DM9000
static void at91sam9261ek_dm9000_hw_init(void)
{
+ struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC;
+
/* Configure SMC CS2 for DM9000 */
#ifdef CONFIG_AT91SAM9G10EK
- at91_sys_write(AT91_SMC_SETUP(2),
- AT91_SMC_NWESETUP_(3) | AT91_SMC_NCS_WRSETUP_(0) |
- AT91_SMC_NRDSETUP_(3) | AT91_SMC_NCS_RDSETUP_(0));
- at91_sys_write(AT91_SMC_PULSE(2),
- AT91_SMC_NWEPULSE_(6) | AT91_SMC_NCS_WRPULSE_(8) |
- AT91_SMC_NRDPULSE_(6) | AT91_SMC_NCS_RDPULSE_(8));
- at91_sys_write(AT91_SMC_CYCLE(2),
- AT91_SMC_NWECYCLE_(20) | AT91_SMC_NRDCYCLE_(20));
- at91_sys_write(AT91_SMC_MODE(2),
- AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
- AT91_SMC_EXNWMODE_DISABLE |
- AT91_SMC_BAT_WRITE | AT91_SMC_DBW_16 |
- AT91_SMC_TDF_(1));
+ writel(AT91_SMC_SETUP_NWE(3) | AT91_SMC_SETUP_NCS_WR(0) |
+ AT91_SMC_SETUP_NRD(3) | AT91_SMC_SETUP_NCS_RD(0),
+ &smc->cs[2].setup);
+ writel(AT91_SMC_PULSE_NWE(6) | AT91_SMC_PULSE_NCS_WR(8) |
+ AT91_SMC_PULSE_NRD(6) | AT91_SMC_PULSE_NCS_RD(8),
+ &smc->cs[2].pulse);
+ writel(AT91_SMC_CYCLE_NWE(20) | AT91_SMC_CYCLE_NRD(20),
+ &smc->cs[2].cycle);
+ writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |
+ AT91_SMC_MODE_EXNW_DISABLE |
+ AT91_SMC_MODE_BAT | AT91_SMC_MODE_DBW_16 |
+ AT91_SMC_MODE_TDF_CYCLE(1),
+ &smc->cs[2].mode);
#else
- at91_sys_write(AT91_SMC_SETUP(2),
- AT91_SMC_NWESETUP_(2) | AT91_SMC_NCS_WRSETUP_(0) |
- AT91_SMC_NRDSETUP_(2) | AT91_SMC_NCS_RDSETUP_(0));
- at91_sys_write(AT91_SMC_PULSE(2),
- AT91_SMC_NWEPULSE_(4) | AT91_SMC_NCS_WRPULSE_(8) |
- AT91_SMC_NRDPULSE_(4) | AT91_SMC_NCS_RDPULSE_(8));
- at91_sys_write(AT91_SMC_CYCLE(2),
- AT91_SMC_NWECYCLE_(16) | AT91_SMC_NRDCYCLE_(16));
- at91_sys_write(AT91_SMC_MODE(2),
- AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
- AT91_SMC_EXNWMODE_DISABLE |
- AT91_SMC_BAT_WRITE | AT91_SMC_DBW_16 |
- AT91_SMC_TDF_(1));
+ writel(AT91_SMC_SETUP_NWE(3) | AT91_SMC_SETUP_NCS_WR(0) |
+ AT91_SMC_SETUP_NRD(2) | AT91_SMC_SETUP_NCS_RD(0),
+ &smc->cs[2].setup);
+ writel(AT91_SMC_PULSE_NWE(4) | AT91_SMC_PULSE_NCS_WR(8) |
+ AT91_SMC_PULSE_NRD(4) | AT91_SMC_PULSE_NCS_RD(8),
+ &smc->cs[2].pulse);
+ writel(AT91_SMC_CYCLE_NWE(16) | AT91_SMC_CYCLE_NRD(16),
+ &smc->cs[2].cycle);
+ writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |
+ AT91_SMC_MODE_EXNW_DISABLE |
+ AT91_SMC_MODE_BAT | AT91_SMC_MODE_DBW_16 |
+ AT91_SMC_MODE_TDF_CYCLE(1),
+ &smc->cs[2].mode);
#endif
/* Configure Reset signal as output */
@@ -156,7 +162,7 @@
vl_vsync_len: 1,
vl_upper_margin:1,
vl_lower_margin:0,
- mmio: AT91SAM9261_LCDC_BASE,
+ mmio: ATMEL_BASE_LCDC,
};
void lcd_enable(void)
@@ -171,6 +177,8 @@
static void at91sam9261ek_lcd_hw_init(void)
{
+ struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+
at91_set_A_periph(AT91_PIN_PB1, 0); /* LCDHSYNC */
at91_set_A_periph(AT91_PIN_PB2, 0); /* LCDDOTCK */
at91_set_A_periph(AT91_PIN_PB3, 0); /* LCDDEN */
@@ -194,12 +202,11 @@
at91_set_B_periph(AT91_PIN_PB27, 0); /* LCDD22 */
at91_set_B_periph(AT91_PIN_PB28, 0); /* LCDD23 */
- at91_sys_write(AT91_PMC_SCER, AT91_PMC_HCK1);
+ writel(AT91_PMC_HCK1, &pmc->scer);
-#ifdef CONFIG_AT91SAM9G10EK
- gd->fb_base = CONFIG_AT91SAM9G10_LCD_BASE;
-#else
- gd->fb_base = AT91SAM9261_SRAM_BASE;
+ /* For 9G10EK, let U-Boot allocate the framebuffer in SDRAM */
+#ifdef CONFIG_AT91SAM9261EK
+ gd->fb_base = ATMEL_BASE_SRAM;
#endif
}
@@ -217,7 +224,7 @@
lcd_printf ("(C) 2008 ATMEL Corp\n");
lcd_printf ("at91support@atmel.com\n");
lcd_printf ("%s CPU at %s MHz\n",
- CONFIG_SYS_AT91_CPU_NAME,
+ ATMEL_CPU_NAME,
strmhz(temp, get_cpu_clk_rate()));
dram_size = 0;
@@ -246,9 +253,9 @@
gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9261EK;
#endif
/* adress of boot parameters */
- gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
- at91_serial_hw_init();
+ at91_seriald_hw_init();
#ifdef CONFIG_CMD_NAND
at91sam9261ek_nand_hw_init();
#endif
@@ -273,8 +280,9 @@
int dram_init(void)
{
- gd->bd->bi_dram[0].start = PHYS_SDRAM;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
+ gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
+ CONFIG_SYS_SDRAM_SIZE);
+
return 0;
}
diff --git a/board/atmel/at91sam9261ek/config.mk b/board/atmel/at91sam9261ek/config.mk
deleted file mode 100644
index e554a45..0000000
--- a/board/atmel/at91sam9261ek/config.mk
+++ /dev/null
@@ -1 +0,0 @@
-CONFIG_SYS_TEXT_BASE = 0x23f00000
diff --git a/board/atmel/at91sam9261ek/led.c b/board/atmel/at91sam9261ek/led.c
index 5d1c5f2..0c2f522 100644
--- a/board/atmel/at91sam9261ek/led.c
+++ b/board/atmel/at91sam9261ek/led.c
@@ -26,12 +26,15 @@
#include <asm/arch/at91sam9261.h>
#include <asm/arch/at91_pmc.h>
#include <asm/arch/gpio.h>
-#include <asm/arch/io.h>
+#include <asm/arch/at91_pio.h>
+#include <asm/io.h>
void coloured_LED_init(void)
{
+ struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+
/* Enable clock */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9261_ID_PIOA);
+ writel(ATMEL_ID_PIOA, &pmc->pcer);
at91_set_gpio_output(CONFIG_RED_LED, 1);
at91_set_gpio_output(CONFIG_GREEN_LED, 1);
diff --git a/board/atmel/at91sam9263ek/at91sam9263ek.c b/board/atmel/at91sam9263ek/at91sam9263ek.c
index 91efc07..4d2937d 100644
--- a/board/atmel/at91sam9263ek/at91sam9263ek.c
+++ b/board/atmel/at91sam9263ek/at91sam9263ek.c
@@ -32,7 +32,8 @@
#include <asm/arch/at91_matrix.h>
#include <asm/arch/at91_pio.h>
#include <asm/arch/clk.h>
-#include <asm/arch/io.h>
+#include <asm/io.h>
+#include <asm/arch/gpio.h>
#include <asm/arch/hardware.h>
#include <lcd.h>
#include <atmel_lcdc.h>
@@ -52,9 +53,9 @@
static void at91sam9263ek_nand_hw_init(void)
{
unsigned long csa;
- at91_smc_t *smc = (at91_smc_t *) AT91_SMC0_BASE;
- at91_matrix_t *matrix = (at91_matrix_t *) AT91_MATRIX_BASE;
- at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
+ at91_smc_t *smc = (at91_smc_t *) ATMEL_BASE_SMC0;
+ at91_matrix_t *matrix = (at91_matrix_t *) ATMEL_BASE_MATRIX;
+ at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
/* Enable CS3 */
csa = readl(&matrix->csa[0]) | AT91_MATRIX_CSA_EBI_CS3A;
@@ -83,14 +84,14 @@
AT91_SMC_MODE_TDF_CYCLE(2),
&smc->cs[3].mode);
- writel(1 << AT91SAM9263_ID_PIOA | 1 << AT91SAM9263_ID_PIOCDE,
+ writel(1 << ATMEL_ID_PIOA | 1 << ATMEL_ID_PIOCDE,
&pmc->pcer);
/* Configure RDY/BSY */
- at91_set_pio_input(CONFIG_SYS_NAND_READY_PIN, 1);
+ at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1);
/* Enable NandFlash */
- at91_set_pio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
+ at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
}
#endif
@@ -98,11 +99,11 @@
static void at91sam9263ek_macb_hw_init(void)
{
unsigned long erstl;
- at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
- at91_pio_t *pio = (at91_pio_t *) AT91_PIO_BASE;
- at91_rstc_t *rstc = (at91_rstc_t *) AT91_RSTC_BASE;
+ at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
+ at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO;
+ at91_rstc_t *rstc = (at91_rstc_t *) ATMEL_BASE_RSTC;
/* Enable clock */
- writel(1 << AT91SAM9263_ID_EMAC, &pmc->pcer);
+ writel(1 << ATMEL_ID_EMAC, &pmc->pcer);
/*
* Disable pull-up on:
@@ -153,7 +154,7 @@
vl_vsync_len: 1,
vl_upper_margin:1,
vl_lower_margin:0,
- mmio: AT91SAM9263_LCDC_BASE,
+ mmio: ATMEL_BASE_LCDC,
};
void lcd_enable(void)
@@ -168,7 +169,7 @@
static void at91sam9263ek_lcd_hw_init(void)
{
- at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
+ at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
at91_set_a_periph(AT91_PIO_PORTC, 1, 0); /* LCDHSYNC */
at91_set_a_periph(AT91_PIO_PORTC, 2, 0); /* LCDDOTCK */
@@ -193,8 +194,8 @@
at91_set_a_periph(AT91_PIO_PORTC, 26, 0); /* LCDD22 */
at91_set_a_periph(AT91_PIO_PORTC, 27, 0); /* LCDD23 */
- writel(1 << AT91SAM9263_ID_LCDC, &pmc->pcer);
- gd->fb_base = AT91SAM9263_SRAM0_BASE;
+ writel(1 << ATMEL_ID_LCDC, &pmc->pcer);
+ gd->fb_base = ATMEL_BASE_SRAM0;
}
#ifdef CONFIG_LCD_INFO
@@ -218,7 +219,7 @@
lcd_printf ("(C) 2008 ATMEL Corp\n");
lcd_printf ("at91support@atmel.com\n");
lcd_printf ("%s CPU at %s MHz\n",
- CONFIG_SYS_AT91_CPU_NAME,
+ ATMEL_CPU_NAME,
strmhz(temp, get_cpu_clk_rate()));
dram_size = 0;
@@ -244,6 +245,18 @@
#endif /* CONFIG_LCD_INFO */
#endif
+int board_early_init_f(void)
+{
+ struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+
+ /* Enable clocks for all PIOs */
+ writel((1 << ATMEL_ID_PIOA) | (1 << ATMEL_ID_PIOB) |
+ (1 << ATMEL_ID_PIOCDE),
+ &pmc->pcer);
+
+ return 0;
+}
+
int board_init(void)
{
/* Enable Ctrlc */
@@ -252,9 +265,9 @@
/* arch number of AT91SAM9263EK-Board */
gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9263EK;
/* adress of boot parameters */
- gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
- at91_serial_hw_init();
+ at91_seriald_hw_init();
#ifdef CONFIG_CMD_NAND
at91sam9263ek_nand_hw_init();
#endif
@@ -276,8 +289,9 @@
int dram_init(void)
{
- gd->bd->bi_dram[0].start = PHYS_SDRAM;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
+ gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
+ CONFIG_SYS_SDRAM_SIZE);
+
return 0;
}
@@ -291,7 +305,7 @@
{
int rc = 0;
#ifdef CONFIG_MACB
- rc = macb_eth_initialize(0, (void *) AT91_EMAC_BASE, 0x00);
+ rc = macb_eth_initialize(0, (void *) ATMEL_BASE_EMAC, 0x00);
#endif
return rc;
}
diff --git a/board/atmel/at91sam9263ek/config.mk b/board/atmel/at91sam9263ek/config.mk
deleted file mode 100644
index e554a45..0000000
--- a/board/atmel/at91sam9263ek/config.mk
+++ /dev/null
@@ -1 +0,0 @@
-CONFIG_SYS_TEXT_BASE = 0x23f00000
diff --git a/board/atmel/at91sam9263ek/led.c b/board/atmel/at91sam9263ek/led.c
index fa1f05b..c44455e 100644
--- a/board/atmel/at91sam9263ek/led.c
+++ b/board/atmel/at91sam9263ek/led.c
@@ -23,25 +23,24 @@
*/
#include <common.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_pio.h>
+#include <asm/io.h>
#include <asm/arch/gpio.h>
-#include <asm/arch/io.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91sam9263.h>
void coloured_LED_init(void)
{
/* Enable clock */
- at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
+ at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
- writel(1 << AT91SAM9263_ID_PIOB | 1 << AT91SAM9263_ID_PIOCDE,
+ writel(1 << ATMEL_ID_PIOB | 1 << ATMEL_ID_PIOCDE,
&pmc->pcer);
- at91_set_pio_output(CONFIG_RED_LED, 1);
- at91_set_pio_output(CONFIG_GREEN_LED, 1);
- at91_set_pio_output(CONFIG_YELLOW_LED, 1);
+ at91_set_gpio_output(CONFIG_RED_LED, 1);
+ at91_set_gpio_output(CONFIG_GREEN_LED, 1);
+ at91_set_gpio_output(CONFIG_YELLOW_LED, 1);
- at91_set_pio_value(CONFIG_RED_LED, 0);
- at91_set_pio_value(CONFIG_GREEN_LED, 1);
- at91_set_pio_value(CONFIG_YELLOW_LED, 1);
+ at91_set_gpio_value(CONFIG_RED_LED, 0);
+ at91_set_gpio_value(CONFIG_GREEN_LED, 1);
+ at91_set_gpio_value(CONFIG_YELLOW_LED, 1);
}
diff --git a/board/atmel/at91sam9rlek/at91sam9rlek.c b/board/atmel/at91sam9rlek/at91sam9rlek.c
index e374917..e559084 100644
--- a/board/atmel/at91sam9rlek/at91sam9rlek.c
+++ b/board/atmel/at91sam9rlek/at91sam9rlek.c
@@ -23,6 +23,7 @@
*/
#include <common.h>
+#include <asm/io.h>
#include <asm/arch/at91sam9rl.h>
#include <asm/arch/at91sam9rl_matrix.h>
#include <asm/arch/at91sam9_smc.h>
@@ -31,7 +32,7 @@
#include <asm/arch/at91_rstc.h>
#include <asm/arch/clk.h>
#include <asm/arch/gpio.h>
-#include <asm/arch/io.h>
+
#include <lcd.h>
#include <atmel_lcdc.h>
#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB)
@@ -48,33 +49,37 @@
#ifdef CONFIG_CMD_NAND
static void at91sam9rlek_nand_hw_init(void)
{
+ struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC;
+ struct at91_matrix *matrix = (struct at91_matrix *)ATMEL_BASE_MATRIX;
+ struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
unsigned long csa;
/* Enable CS3 */
- csa = at91_sys_read(AT91_MATRIX_EBICSA);
- at91_sys_write(AT91_MATRIX_EBICSA,
- csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
+ csa = readl(&matrix->ebicsa);
+ csa |= AT91_MATRIX_CS3A_SMC_SMARTMEDIA;
+
+ writel(csa, &matrix->ebicsa);
/* Configure SMC CS3 for NAND/SmartMedia */
- at91_sys_write(AT91_SMC_SETUP(3),
- AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0) |
- AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0));
- at91_sys_write(AT91_SMC_PULSE(3),
- AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3) |
- AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3));
- at91_sys_write(AT91_SMC_CYCLE(3),
- AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5));
- at91_sys_write(AT91_SMC_MODE(3),
- AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
- AT91_SMC_EXNWMODE_DISABLE |
+ writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(0) |
+ AT91_SMC_SETUP_NRD(1) | AT91_SMC_SETUP_NCS_RD(0),
+ &smc->cs[3].setup);
+ writel(AT91_SMC_PULSE_NWE(3) | AT91_SMC_PULSE_NCS_WR(3) |
+ AT91_SMC_PULSE_NRD(3) | AT91_SMC_PULSE_NCS_RD(3),
+ &smc->cs[3].pulse);
+ writel(AT91_SMC_CYCLE_NWE(5) | AT91_SMC_CYCLE_NRD(5),
+ &smc->cs[3].cycle);
+ writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |
+ AT91_SMC_MODE_EXNW_DISABLE |
#ifdef CONFIG_SYS_NAND_DBW_16
- AT91_SMC_DBW_16 |
+ AT91_SMC_MODE_DBW_16 |
#else /* CONFIG_SYS_NAND_DBW_8 */
- AT91_SMC_DBW_8 |
+ AT91_SMC_MODE_DBW_8 |
#endif
- AT91_SMC_TDF_(2));
+ AT91_SMC_MODE_TDF_CYCLE(2),
+ &smc->cs[3].mode);
- at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9RL_ID_PIOD);
+ writel(1 << ATMEL_ID_PIOD, &pmc->pcer);
/* Configure RDY/BSY */
at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1);
@@ -102,7 +107,7 @@
vl_vsync_len: 1,
vl_upper_margin:1,
vl_lower_margin:0,
- mmio: AT91SAM9RL_LCDC_BASE,
+ mmio: ATMEL_BASE_LCDC,
};
void lcd_enable(void)
@@ -116,6 +121,8 @@
}
static void at91sam9rlek_lcd_hw_init(void)
{
+ struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+
at91_set_B_periph(AT91_PIN_PC1, 0); /* LCDPWR */
at91_set_A_periph(AT91_PIN_PC5, 0); /* LCDHSYNC */
at91_set_A_periph(AT91_PIN_PC6, 0); /* LCDDOTCK */
@@ -138,9 +145,7 @@
at91_set_B_periph(AT91_PIN_PC24, 0); /* LCDD22 */
at91_set_B_periph(AT91_PIN_PC25, 0); /* LCDD23 */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9RL_ID_LCDC);
-
- gd->fb_base = 0;
+ writel(1 << ATMEL_ID_LCDC, &pmc->pcer);
}
#ifdef CONFIG_LCD_INFO
@@ -157,7 +162,7 @@
lcd_printf ("(C) 2008 ATMEL Corp\n");
lcd_printf ("at91support@atmel.com\n");
lcd_printf ("%s CPU at %s MHz\n",
- CONFIG_SYS_AT91_CPU_NAME,
+ ATMEL_CPU_NAME,
strmhz(temp, get_cpu_clk_rate()));
dram_size = 0;
@@ -173,6 +178,17 @@
#endif /* CONFIG_LCD_INFO */
#endif
+int board_early_init_f(void)
+{
+ struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+
+ /* Enable clocks for all PIOs */
+ writel((1 << ATMEL_ID_PIOA) | (1 << ATMEL_ID_PIOB) |
+ (1 << ATMEL_ID_PIOC) | (1 << ATMEL_ID_PIOD),
+ &pmc->pcer);
+
+ return 0;
+}
int board_init(void)
{
@@ -182,9 +198,9 @@
/* arch number of AT91SAM9RLEK-Board */
gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9RLEK;
/* adress of boot parameters */
- gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
- at91_serial_hw_init();
+ at91_seriald_hw_init();
#ifdef CONFIG_CMD_NAND
at91sam9rlek_nand_hw_init();
#endif
@@ -199,7 +215,8 @@
int dram_init(void)
{
- gd->bd->bi_dram[0].start = PHYS_SDRAM;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
+ gd->ram_size = get_ram_size(
+ (void *)CONFIG_SYS_SDRAM_BASE,
+ CONFIG_SYS_SDRAM_SIZE);
return 0;
}
diff --git a/board/atmel/at91sam9rlek/config.mk b/board/atmel/at91sam9rlek/config.mk
deleted file mode 100644
index e554a45..0000000
--- a/board/atmel/at91sam9rlek/config.mk
+++ /dev/null
@@ -1 +0,0 @@
-CONFIG_SYS_TEXT_BASE = 0x23f00000
diff --git a/board/atmel/at91sam9rlek/led.c b/board/atmel/at91sam9rlek/led.c
index 9634cc0..987e8c0 100644
--- a/board/atmel/at91sam9rlek/led.c
+++ b/board/atmel/at91sam9rlek/led.c
@@ -26,12 +26,14 @@
#include <asm/arch/at91sam9rl.h>
#include <asm/arch/at91_pmc.h>
#include <asm/arch/gpio.h>
-#include <asm/arch/io.h>
+#include <asm/io.h>
void coloured_LED_init(void)
{
+ struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+
/* Enable clock */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9RL_ID_PIOD);
+ writel(ATMEL_ID_PIOD, &pmc->pcer);
at91_set_gpio_output(CONFIG_RED_LED, 1);
at91_set_gpio_output(CONFIG_GREEN_LED, 1);
diff --git a/board/davinci/dm355leopard/dm355leopard.c b/board/davinci/dm355leopard/dm355leopard.c
index 0ee0d11..0ad5678 100644
--- a/board/davinci/dm355leopard/dm355leopard.c
+++ b/board/davinci/dm355leopard/dm355leopard.c
@@ -20,7 +20,7 @@
#include <nand.h>
#include <asm/io.h>
#include <asm/arch/hardware.h>
-#include <asm/arch/gpio_defs.h>
+#include <asm/arch/gpio.h>
#include <asm/arch/nand_defs.h>
#include <asm/arch/davinci_misc.h>
#include <net.h>
diff --git a/board/davinci/dm365evm/dm365evm.c b/board/davinci/dm365evm/dm365evm.c
index 5fb7611..ac54106 100644
--- a/board/davinci/dm365evm/dm365evm.c
+++ b/board/davinci/dm365evm/dm365evm.c
@@ -22,7 +22,7 @@
#include <asm/arch/hardware.h>
#include <asm/arch/emif_defs.h>
#include <asm/arch/nand_defs.h>
-#include <asm/arch/gpio_defs.h>
+#include <asm/arch/gpio.h>
#include <netdev.h>
#include <asm/arch/davinci_misc.h>
#ifdef CONFIG_DAVINCI_MMC
diff --git a/arch/arm/cpu/arm920t/at91rm9200/Makefile b/board/in-circuit/grasshopper/Makefile
similarity index 72%
rename from arch/arm/cpu/arm920t/at91rm9200/Makefile
rename to board/in-circuit/grasshopper/Makefile
index 7530e6a..a6c36c7 100644
--- a/arch/arm/cpu/arm920t/at91rm9200/Makefile
+++ b/board/in-circuit/grasshopper/Makefile
@@ -1,7 +1,10 @@
#
-# (C) Copyright 2000-2006
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
+# Copyright (C) 2011
+# Corscience GmbH & Co.KG, Andreas Bießmann <biessmann@corscience.de>
+#
# See file CREDITS for list of people who contributed to this
# project.
#
@@ -19,31 +22,17 @@
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
-#
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(SOC).o
+LIB := $(obj)lib$(BOARD).o
-SOBJS += lowlevel_init.o
+COBJS-y += $(BOARD).o
-COBJS += bcm5221.o
-COBJS += dm9161.o
-COBJS += ether.o
-COBJS += i2c.o
-COBJS-$(CONFIG_KS8721_PHY) += ks8721.o
-COBJS += lxt972.o
-COBJS += reset.o
-COBJS += spi.o
-COBJS += timer.o
-COBJS += usb.o
+SRCS := $(COBJS-y:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS-y))
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) $(COBJS-y:.o=.c)
-OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS) $(COBJS-y))
-
-all: $(obj).depend $(LIB)
-
-$(LIB): $(OBJS)
+$(LIB): $(obj).depend $(OBJS)
$(call cmd_link_o_target, $(OBJS))
#########################################################################
diff --git a/board/in-circuit/grasshopper/grasshopper.c b/board/in-circuit/grasshopper/grasshopper.c
new file mode 100644
index 0000000..475a759
--- /dev/null
+++ b/board/in-circuit/grasshopper/grasshopper.c
@@ -0,0 +1,112 @@
+/*
+ * Copyright (C) 2011
+ * Corscience GmbH & Co.KG, Andreas Bießmann <biessmann@corscience.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+
+#include <asm/io.h>
+#include <asm/sdram.h>
+#include <asm/arch/clk.h>
+#include <asm/arch/hmatrix.h>
+#include <asm/arch/mmu.h>
+#include <asm/arch/portmux.h>
+#include <netdev.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+struct mmu_vm_range mmu_vmr_table[CONFIG_SYS_NR_VM_REGIONS] = {
+ {
+ .virt_pgno = CONFIG_SYS_FLASH_BASE >> PAGE_SHIFT,
+ .nr_pages = CONFIG_SYS_FLASH_SIZE >> PAGE_SHIFT,
+ .phys = (CONFIG_SYS_FLASH_BASE >> PAGE_SHIFT)
+ | MMU_VMR_CACHE_NONE,
+ }, {
+ .virt_pgno = CONFIG_SYS_SDRAM_BASE >> PAGE_SHIFT,
+ .nr_pages = EBI_SDRAM_SIZE >> PAGE_SHIFT,
+ .phys = (CONFIG_SYS_SDRAM_BASE >> PAGE_SHIFT)
+ | MMU_VMR_CACHE_WRBACK,
+ },
+};
+
+static const struct sdram_config sdram_config = {
+ /* Dual MT48LC16M16A2-7E (or equal) */
+ .data_bits = SDRAM_DATA_32BIT,
+ .row_bits = 13,
+ .col_bits = 9,
+ .bank_bits = 2,
+ .cas = 2,
+ .twr = 2,
+ .trc = 7,
+ .trp = 2,
+ .trcd = 2,
+ .tras = 4,
+ .txsr = 7,
+ /* 7.81 us */
+ .refresh_period = (781 * (SDRAMC_BUS_HZ / 1000)) / 100000,
+};
+
+int board_early_init_f(void)
+{
+ /* Enable SDRAM in the EBI mux */
+ hmatrix_slave_write(EBI, SFR, HMATRIX_BIT(EBI_SDRAM_ENABLE));
+
+ portmux_enable_ebi(SDRAM_DATA_32BIT, 23, 0, PORTMUX_DRIVE_HIGH);
+ portmux_enable_usart0(PORTMUX_DRIVE_MIN);
+ portmux_enable_usart1(PORTMUX_DRIVE_MIN);
+#if defined(CONFIG_MACB)
+ portmux_enable_macb0(PORTMUX_MACB_MII, PORTMUX_DRIVE_LOW);
+#endif
+
+ return 0;
+}
+
+phys_size_t initdram(int board_type)
+{
+ unsigned long expected_size;
+ unsigned long actual_size;
+ void *sdram_base;
+
+ sdram_base = uncached(EBI_SDRAM_BASE);
+
+ expected_size = sdram_init(sdram_base, &sdram_config);
+ actual_size = get_ram_size(sdram_base, expected_size);
+
+ if (expected_size != actual_size)
+ printf("Warning: Only %lu of %lu MiB SDRAM is working\n",
+ actual_size >> 20, expected_size >> 20);
+
+ return actual_size;
+}
+
+int board_early_init_r(void)
+{
+ gd->bd->bi_phy_id[0] = 0x00;
+ return 0;
+}
+
+#ifdef CONFIG_CMD_NET
+int board_eth_init(bd_t *bi)
+{
+ macb_eth_initialize(0, (void *)ATMEL_BASE_MACB0, bi->bi_phy_id[0]);
+ return 0;
+}
+#endif
+/* vim: set noet ts=8: */
diff --git a/board/spear/common/spr_misc.c b/board/spear/common/spr_misc.c
index 0562222..0812c20 100644
--- a/board/spear/common/spr_misc.c
+++ b/board/spear/common/spr_misc.c
@@ -46,9 +46,7 @@
struct xloader_table_1_2 *table_1_2;
struct chip_data *chip = &chip_data;
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = get_ram_size(PHYS_SDRAM_1,
- PHYS_SDRAM_1_MAXSIZE);
+ gd->ram_size = get_ram_size(PHYS_SDRAM_1, PHYS_SDRAM_1_MAXSIZE);
if (XLOADER_TABLE_VERSION_1_1 == xloader_tb->table_version) {
table_1_1 = &xloader_tb->table.table_1_1;
@@ -66,6 +64,12 @@
return 0;
}
+void dram_init_banksize(void)
+{
+ gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+ gd->bd->bi_dram[0].size = gd->ram_size;
+}
+
int misc_init_r(void)
{
#if defined(CONFIG_CMD_NET)
diff --git a/board/st-ericsson/u8500/u8500_href.c b/board/st-ericsson/u8500/u8500_href.c
index 525633e..9283fab 100644
--- a/board/st-ericsson/u8500/u8500_href.c
+++ b/board/st-ericsson/u8500/u8500_href.c
@@ -27,6 +27,7 @@
#include <asm/arch/hardware.h>
#include <asm/arch/sys_proto.h>
#ifdef CONFIG_MMC
+#include "prcmu-fw.h"
#include "../../../drivers/mmc/arm_pl180_mmci.h"
#endif
diff --git a/board/ti/evm/evm.c b/board/ti/evm/evm.c
index aaf3033..30c1c57 100644
--- a/board/ti/evm/evm.c
+++ b/board/ti/evm/evm.c
@@ -33,10 +33,14 @@
#include <asm/arch/mem.h>
#include <asm/arch/mux.h>
#include <asm/arch/sys_proto.h>
+#include <asm/arch/gpio.h>
#include <i2c.h>
#include <asm/mach-types.h>
#include "evm.h"
+#define OMAP3EVM_GPIO_ETH_RST_GEN1 64
+#define OMAP3EVM_GPIO_ETH_RST_GEN2 7
+
DECLARE_GLOBAL_DATA_PTR;
static u32 omap3_evm_version;
@@ -130,6 +134,9 @@
#endif
omap3_evm_get_revision();
+#if defined(CONFIG_CMD_NET)
+ reset_net_chip();
+#endif
dieid_num_r();
return 0;
@@ -146,6 +153,7 @@
MUX_EVM();
}
+#ifdef CONFIG_CMD_NET
/*
* Routine: setup_net_chip
* Description: Setting up the configuration GPMC registers specific to the
@@ -153,7 +161,6 @@
*/
static void setup_net_chip(void)
{
- struct gpio *gpio3_base = (struct gpio *)OMAP34XX_GPIO3_BASE;
struct ctrl *ctrl_base = (struct ctrl *)OMAP34XX_CTRL_BASE;
/* Configure GPMC registers */
@@ -172,16 +179,37 @@
/* Enable off mode for ALE in PADCONF_GPMC_NADV_ALE register */
writew(readw(&ctrl_base->gpmc_nadv_ale) | 0x0E00,
&ctrl_base->gpmc_nadv_ale);
+}
- /* Make GPIO 64 as output pin */
- writel(readl(&gpio3_base->oe) & ~(GPIO0), &gpio3_base->oe);
+/**
+ * Reset the ethernet chip.
+ */
+static void reset_net_chip(void)
+{
+ int ret;
+ int rst_gpio;
- /* Now send a pulse on the GPIO pin */
- writel(GPIO0, &gpio3_base->setdataout);
+ if (get_omap3_evm_rev() == OMAP3EVM_BOARD_GEN_1) {
+ rst_gpio = OMAP3EVM_GPIO_ETH_RST_GEN1;
+ } else {
+ rst_gpio = OMAP3EVM_GPIO_ETH_RST_GEN2;
+ }
+
+ ret = omap_request_gpio(rst_gpio);
+ if (ret < 0) {
+ printf("Unable to get GPIO %d\n", rst_gpio);
+ return ;
+ }
+
+ /* Configure as output */
+ omap_set_gpio_direction(rst_gpio, 0);
+
+ /* Send a pulse on the GPIO pin */
+ omap_set_gpio_dataout(rst_gpio, 1);
udelay(1);
- writel(GPIO0, &gpio3_base->cleardataout);
+ omap_set_gpio_dataout(rst_gpio, 0);
udelay(1);
- writel(GPIO0, &gpio3_base->setdataout);
+ omap_set_gpio_dataout(rst_gpio, 1);
}
int board_eth_init(bd_t *bis)
@@ -192,3 +220,4 @@
#endif
return rc;
}
+#endif /* CONFIG_CMD_NET */
diff --git a/board/ti/evm/evm.h b/board/ti/evm/evm.h
index b721ad6..623cf1b 100644
--- a/board/ti/evm/evm.h
+++ b/board/ti/evm/evm.h
@@ -49,6 +49,7 @@
#if defined(CONFIG_CMD_NET)
static void setup_net_chip(void);
+static void reset_net_chip(void);
#endif
/*
diff --git a/board/ti/panda/Makefile b/board/ti/panda/Makefile
index 2186403..09f88ee 100644
--- a/board/ti/panda/Makefile
+++ b/board/ti/panda/Makefile
@@ -25,7 +25,9 @@
LIB = $(obj)lib$(BOARD).o
+ifndef CONFIG_SPL_BUILD
COBJS := panda.o
+endif
SRCS := $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
diff --git a/board/ti/panda/panda.c b/board/ti/panda/panda.c
index 78e1910..9afed80 100644
--- a/board/ti/panda/panda.c
+++ b/board/ti/panda/panda.c
@@ -25,7 +25,7 @@
#include <asm/arch/sys_proto.h>
#include <asm/arch/mmc_host_def.h>
-#include "panda.h"
+#include "panda_mux_data.h"
DECLARE_GLOBAL_DATA_PTR;
@@ -65,27 +65,14 @@
return 0;
}
-void do_set_mux(u32 base, struct pad_conf_entry const *array, int size)
+void set_muxconf_regs_non_essential(void)
{
- int i;
- struct pad_conf_entry *pad = (struct pad_conf_entry *) array;
-
- for (i = 0; i < size; i++, pad++)
- writew(pad->val, base + pad->offset);
-}
-
-/**
- * @brief set_muxconf_regs Setting up the configuration Mux registers
- * specific to the board.
- */
-void set_muxconf_regs(void)
-{
- do_set_mux(CONTROL_PADCONF_CORE, core_padconf_array,
- sizeof(core_padconf_array) /
+ do_set_mux(CONTROL_PADCONF_CORE, core_padconf_array_non_essential,
+ sizeof(core_padconf_array_non_essential) /
sizeof(struct pad_conf_entry));
- do_set_mux(CONTROL_PADCONF_WKUP, wkup_padconf_array,
- sizeof(wkup_padconf_array) /
+ do_set_mux(CONTROL_PADCONF_WKUP, wkup_padconf_array_non_essential,
+ sizeof(wkup_padconf_array_non_essential) /
sizeof(struct pad_conf_entry));
}
diff --git a/board/ti/panda/panda.h b/board/ti/panda/panda.h
deleted file mode 100644
index e3d090e..0000000
--- a/board/ti/panda/panda.h
+++ /dev/null
@@ -1,264 +0,0 @@
-/*
- * (C) Copyright 2010
- * Texas Instruments Incorporated, <www.ti.com>
- *
- * Balaji Krishnamoorthy <balajitk@ti.com>
- * Aneesh V <aneesh@ti.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _PANDA_H_
-#define _PANDA_H_
-
-#include <asm/io.h>
-#include <asm/arch/mux_omap4.h>
-
-const struct pad_conf_entry core_padconf_array[] = {
- {GPMC_AD0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat0 */
- {GPMC_AD1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat1 */
- {GPMC_AD2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat2 */
- {GPMC_AD3, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat3 */
- {GPMC_AD4, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat4 */
- {GPMC_AD5, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat5 */
- {GPMC_AD6, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat6 */
- {GPMC_AD7, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat7 */
- {GPMC_AD8, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M3)}, /* gpio_32 */
- {GPMC_AD9, (PTU | IEN | M3)}, /* gpio_33 */
- {GPMC_AD10, (PTU | IEN | M3)}, /* gpio_34 */
- {GPMC_AD11, (PTU | IEN | M3)}, /* gpio_35 */
- {GPMC_AD12, (PTU | IEN | M3)}, /* gpio_36 */
- {GPMC_AD13, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)}, /* gpio_37 */
- {GPMC_AD14, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)}, /* gpio_38 */
- {GPMC_AD15, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)}, /* gpio_39 */
- {GPMC_A16, (M3)}, /* gpio_40 */
- {GPMC_A17, (PTD | M3)}, /* gpio_41 */
- {GPMC_A18, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row6 */
- {GPMC_A19, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row7 */
- {GPMC_A20, (IEN | M3)}, /* gpio_44 */
- {GPMC_A21, (M3)}, /* gpio_45 */
- {GPMC_A22, (M3)}, /* gpio_46 */
- {GPMC_A23, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col7 */
- {GPMC_A24, (PTD | M3)}, /* gpio_48 */
- {GPMC_A25, (PTD | M3)}, /* gpio_49 */
- {GPMC_NCS0, (M3)}, /* gpio_50 */
- {GPMC_NCS1, (IEN | M3)}, /* gpio_51 */
- {GPMC_NCS2, (IEN | M3)}, /* gpio_52 */
- {GPMC_NCS3, (IEN | M3)}, /* gpio_53 */
- {GPMC_NWP, (M3)}, /* gpio_54 */
- {GPMC_CLK, (PTD | M3)}, /* gpio_55 */
- {GPMC_NADV_ALE, (M3)}, /* gpio_56 */
- {GPMC_NOE, (PTU | IEN | OFF_EN | OFF_OUT_PTD | M1)}, /* sdmmc2_clk */
- {GPMC_NWE, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_cmd */
- {GPMC_NBE0_CLE, (M3)}, /* gpio_59 */
- {GPMC_NBE1, (PTD | M3)}, /* gpio_60 */
- {GPMC_WAIT0, (PTU | IEN | M3)}, /* gpio_61 */
- {GPMC_WAIT1, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)}, /* gpio_62 */
- {C2C_DATA11, (PTD | M3)}, /* gpio_100 */
- {C2C_DATA12, (PTU | IEN | M3)}, /* gpio_101 */
- {C2C_DATA13, (PTD | M3)}, /* gpio_102 */
- {C2C_DATA14, (M1)}, /* dsi2_te0 */
- {C2C_DATA15, (PTD | M3)}, /* gpio_104 */
- {HDMI_HPD, (M0)}, /* hdmi_hpd */
- {HDMI_CEC, (M0)}, /* hdmi_cec */
- {HDMI_DDC_SCL, (PTU | M0)}, /* hdmi_ddc_scl */
- {HDMI_DDC_SDA, (PTU | IEN | M0)}, /* hdmi_ddc_sda */
- {CSI21_DX0, (IEN | M0)}, /* csi21_dx0 */
- {CSI21_DY0, (IEN | M0)}, /* csi21_dy0 */
- {CSI21_DX1, (IEN | M0)}, /* csi21_dx1 */
- {CSI21_DY1, (IEN | M0)}, /* csi21_dy1 */
- {CSI21_DX2, (IEN | M0)}, /* csi21_dx2 */
- {CSI21_DY2, (IEN | M0)}, /* csi21_dy2 */
- {CSI21_DX3, (PTD | M7)}, /* csi21_dx3 */
- {CSI21_DY3, (PTD | M7)}, /* csi21_dy3 */
- {CSI21_DX4, (PTD | OFF_EN | OFF_PD | OFF_IN | M7)}, /* csi21_dx4 */
- {CSI21_DY4, (PTD | OFF_EN | OFF_PD | OFF_IN | M7)}, /* csi21_dy4 */
- {CSI22_DX0, (IEN | M0)}, /* csi22_dx0 */
- {CSI22_DY0, (IEN | M0)}, /* csi22_dy0 */
- {CSI22_DX1, (IEN | M0)}, /* csi22_dx1 */
- {CSI22_DY1, (IEN | M0)}, /* csi22_dy1 */
- {CAM_SHUTTER, (OFF_EN | OFF_PD | OFF_OUT_PTD | M0)}, /* cam_shutter */
- {CAM_STROBE, (OFF_EN | OFF_PD | OFF_OUT_PTD | M0)}, /* cam_strobe */
- {CAM_GLOBALRESET, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)}, /* gpio_83 */
- {USBB1_ULPITLL_CLK, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M4)},/* usbb1_ulpiphy_clk */
- {USBB1_ULPITLL_STP, (OFF_EN | OFF_OUT_PTD | M4)}, /* usbb1_ulpiphy_stp */
- {USBB1_ULPITLL_DIR, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dir */
- {USBB1_ULPITLL_NXT, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_nxt */
- {USBB1_ULPITLL_DAT0, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat0 */
- {USBB1_ULPITLL_DAT1, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat1 */
- {USBB1_ULPITLL_DAT2, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat2 */
- {USBB1_ULPITLL_DAT3, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat3 */
- {USBB1_ULPITLL_DAT4, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat4 */
- {USBB1_ULPITLL_DAT5, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat5 */
- {USBB1_ULPITLL_DAT6, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat6 */
- {USBB1_ULPITLL_DAT7, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat7 */
- {USBB1_HSIC_DATA, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* usbb1_hsic_data */
- {USBB1_HSIC_STROBE, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* usbb1_hsic_strobe */
- {USBC1_ICUSB_DP, (IEN | M0)}, /* usbc1_icusb_dp */
- {USBC1_ICUSB_DM, (IEN | M0)}, /* usbc1_icusb_dm */
- {SDMMC1_CLK, (PTU | OFF_EN | OFF_OUT_PTD | M0)}, /* sdmmc1_clk */
- {SDMMC1_CMD, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_cmd */
- {SDMMC1_DAT0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat0 */
- {SDMMC1_DAT1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat1 */
- {SDMMC1_DAT2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat2 */
- {SDMMC1_DAT3, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat3 */
- {SDMMC1_DAT4, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat4 */
- {SDMMC1_DAT5, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat5 */
- {SDMMC1_DAT6, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat6 */
- {SDMMC1_DAT7, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat7 */
- {ABE_MCBSP2_CLKX, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_mcbsp2_clkx */
- {ABE_MCBSP2_DR, (IEN | OFF_EN | OFF_OUT_PTD | M0)}, /* abe_mcbsp2_dr */
- {ABE_MCBSP2_DX, (OFF_EN | OFF_OUT_PTD | M0)}, /* abe_mcbsp2_dx */
- {ABE_MCBSP2_FSX, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_mcbsp2_fsx */
- {ABE_MCBSP1_CLKX, (IEN | M1)}, /* abe_slimbus1_clock */
- {ABE_MCBSP1_DR, (IEN | M1)}, /* abe_slimbus1_data */
- {ABE_MCBSP1_DX, (OFF_EN | OFF_OUT_PTD | M0)}, /* abe_mcbsp1_dx */
- {ABE_MCBSP1_FSX, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_mcbsp1_fsx */
- {ABE_PDM_UL_DATA, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_pdm_ul_data */
- {ABE_PDM_DL_DATA, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_pdm_dl_data */
- {ABE_PDM_FRAME, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_pdm_frame */
- {ABE_PDM_LB_CLK, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_pdm_lb_clk */
- {ABE_CLKS, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_clks */
- {ABE_DMIC_CLK1, (M0)}, /* abe_dmic_clk1 */
- {ABE_DMIC_DIN1, (IEN | M0)}, /* abe_dmic_din1 */
- {ABE_DMIC_DIN2, (IEN | M0)}, /* abe_dmic_din2 */
- {ABE_DMIC_DIN3, (IEN | M0)}, /* abe_dmic_din3 */
- {UART2_CTS, (PTU | IEN | M0)}, /* uart2_cts */
- {UART2_RTS, (M0)}, /* uart2_rts */
- {UART2_RX, (PTU | IEN | M0)}, /* uart2_rx */
- {UART2_TX, (M0)}, /* uart2_tx */
- {HDQ_SIO, (M3)}, /* gpio_127 */
- {I2C1_SCL, (PTU | IEN | M0)}, /* i2c1_scl */
- {I2C1_SDA, (PTU | IEN | M0)}, /* i2c1_sda */
- {I2C2_SCL, (PTU | IEN | M0)}, /* i2c2_scl */
- {I2C2_SDA, (PTU | IEN | M0)}, /* i2c2_sda */
- {I2C3_SCL, (PTU | IEN | M0)}, /* i2c3_scl */
- {I2C3_SDA, (PTU | IEN | M0)}, /* i2c3_sda */
- {I2C4_SCL, (PTU | IEN | M0)}, /* i2c4_scl */
- {I2C4_SDA, (PTU | IEN | M0)}, /* i2c4_sda */
- {MCSPI1_CLK, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi1_clk */
- {MCSPI1_SOMI, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi1_somi */
- {MCSPI1_SIMO, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi1_simo */
- {MCSPI1_CS0, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi1_cs0 */
- {MCSPI1_CS1, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M3)}, /* mcspi1_cs1 */
- {MCSPI1_CS2, (PTU | OFF_EN | OFF_OUT_PTU | M3)}, /* gpio_139 */
- {MCSPI1_CS3, (PTU | IEN | M3)}, /* gpio_140 */
- {UART3_CTS_RCTX, (PTU | IEN | M0)}, /* uart3_tx */
- {UART3_RTS_SD, (M0)}, /* uart3_rts_sd */
- {UART3_RX_IRRX, (IEN | M0)}, /* uart3_rx */
- {UART3_TX_IRTX, (M0)}, /* uart3_tx */
- {SDMMC5_CLK, (PTU | IEN | OFF_EN | OFF_OUT_PTD | M0)}, /* sdmmc5_clk */
- {SDMMC5_CMD, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc5_cmd */
- {SDMMC5_DAT0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc5_dat0 */
- {SDMMC5_DAT1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc5_dat1 */
- {SDMMC5_DAT2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc5_dat2 */
- {SDMMC5_DAT3, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc5_dat3 */
- {MCSPI4_CLK, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi4_clk */
- {MCSPI4_SIMO, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi4_simo */
- {MCSPI4_SOMI, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi4_somi */
- {MCSPI4_CS0, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi4_cs0 */
- {UART4_RX, (IEN | M0)}, /* uart4_rx */
- {UART4_TX, (M0)}, /* uart4_tx */
- {USBB2_ULPITLL_CLK, (IEN | M3)}, /* gpio_157 */
- {USBB2_ULPITLL_STP, (IEN | M5)}, /* dispc2_data23 */
- {USBB2_ULPITLL_DIR, (IEN | M5)}, /* dispc2_data22 */
- {USBB2_ULPITLL_NXT, (IEN | M5)}, /* dispc2_data21 */
- {USBB2_ULPITLL_DAT0, (IEN | M5)}, /* dispc2_data20 */
- {USBB2_ULPITLL_DAT1, (IEN | M5)}, /* dispc2_data19 */
- {USBB2_ULPITLL_DAT2, (IEN | M5)}, /* dispc2_data18 */
- {USBB2_ULPITLL_DAT3, (IEN | M5)}, /* dispc2_data15 */
- {USBB2_ULPITLL_DAT4, (IEN | M5)}, /* dispc2_data14 */
- {USBB2_ULPITLL_DAT5, (IEN | M5)}, /* dispc2_data13 */
- {USBB2_ULPITLL_DAT6, (IEN | M5)}, /* dispc2_data12 */
- {USBB2_ULPITLL_DAT7, (IEN | M5)}, /* dispc2_data11 */
- {USBB2_HSIC_DATA, (PTD | OFF_EN | OFF_OUT_PTU | M3)}, /* gpio_169 */
- {USBB2_HSIC_STROBE, (PTD | OFF_EN | OFF_OUT_PTU | M3)}, /* gpio_170 */
- {UNIPRO_TX0, (PTD | IEN | M3)}, /* gpio_171 */
- {UNIPRO_TY0, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col1 */
- {UNIPRO_TX1, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col2 */
- {UNIPRO_TY1, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col3 */
- {UNIPRO_TX2, (PTU | IEN | M3)}, /* gpio_0 */
- {UNIPRO_TY2, (PTU | IEN | M3)}, /* gpio_1 */
- {UNIPRO_RX0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row0 */
- {UNIPRO_RY0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row1 */
- {UNIPRO_RX1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row2 */
- {UNIPRO_RY1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row3 */
- {UNIPRO_RX2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row4 */
- {UNIPRO_RY2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row5 */
- {USBA0_OTG_CE, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M0)}, /* usba0_otg_ce */
- {USBA0_OTG_DP, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* usba0_otg_dp */
- {USBA0_OTG_DM, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* usba0_otg_dm */
- {FREF_CLK1_OUT, (M0)}, /* fref_clk1_out */
- {FREF_CLK2_OUT, (PTU | IEN | M3)}, /* gpio_182 */
- {SYS_NIRQ1, (PTU | IEN | M0)}, /* sys_nirq1 */
- {SYS_NIRQ2, (PTU | IEN | M0)}, /* sys_nirq2 */
- {SYS_BOOT0, (PTU | IEN | M3)}, /* gpio_184 */
- {SYS_BOOT1, (M3)}, /* gpio_185 */
- {SYS_BOOT2, (PTD | IEN | M3)}, /* gpio_186 */
- {SYS_BOOT3, (M3)}, /* gpio_187 */
- {SYS_BOOT4, (M3)}, /* gpio_188 */
- {SYS_BOOT5, (PTD | IEN | M3)}, /* gpio_189 */
- {DPM_EMU0, (IEN | M0)}, /* dpm_emu0 */
- {DPM_EMU1, (IEN | M0)}, /* dpm_emu1 */
- {DPM_EMU2, (IEN | M0)}, /* dpm_emu2 */
- {DPM_EMU3, (IEN | M5)}, /* dispc2_data10 */
- {DPM_EMU4, (IEN | M5)}, /* dispc2_data9 */
- {DPM_EMU5, (IEN | M5)}, /* dispc2_data16 */
- {DPM_EMU6, (IEN | M5)}, /* dispc2_data17 */
- {DPM_EMU7, (IEN | M5)}, /* dispc2_hsync */
- {DPM_EMU8, (IEN | M5)}, /* dispc2_pclk */
- {DPM_EMU9, (IEN | M5)}, /* dispc2_vsync */
- {DPM_EMU10, (IEN | M5)}, /* dispc2_de */
- {DPM_EMU11, (IEN | M5)}, /* dispc2_data8 */
- {DPM_EMU12, (IEN | M5)}, /* dispc2_data7 */
- {DPM_EMU13, (IEN | M5)}, /* dispc2_data6 */
- {DPM_EMU14, (IEN | M5)}, /* dispc2_data5 */
- {DPM_EMU15, (IEN | M5)}, /* dispc2_data4 */
- {DPM_EMU16, (M3)}, /* gpio_27 */
- {DPM_EMU17, (IEN | M5)}, /* dispc2_data2 */
- {DPM_EMU18, (IEN | M5)}, /* dispc2_data1 */
- {DPM_EMU19, (IEN | M5)}, /* dispc2_data0 */
-};
-
-const struct pad_conf_entry wkup_padconf_array[] = {
- {PAD0_SIM_IO, (IEN | M0)}, /* sim_io */
- {PAD1_SIM_CLK, (M0)}, /* sim_clk */
- {PAD0_SIM_RESET, (M0)}, /* sim_reset */
- {PAD1_SIM_CD, (PTU | IEN | M0)}, /* sim_cd */
- {PAD0_SIM_PWRCTRL, (M0)}, /* sim_pwrctrl */
- {PAD1_SR_SCL, (PTU | IEN | M0)}, /* sr_scl */
- {PAD0_SR_SDA, (PTU | IEN | M0)}, /* sr_sda */
- {PAD1_FREF_XTAL_IN, (M0)}, /* # */
- {PAD0_FREF_SLICER_IN, (M0)}, /* fref_slicer_in */
- {PAD1_FREF_CLK_IOREQ, (M0)}, /* fref_clk_ioreq */
- {PAD0_FREF_CLK0_OUT, (M2)}, /* sys_drm_msecure */
- {PAD1_FREF_CLK3_REQ, (M3)}, /* gpio_wk30 */
- {PAD0_FREF_CLK3_OUT, (M0)}, /* fref_clk3_out */
- {PAD1_FREF_CLK4_REQ, (PTU | OFF_EN | OFF_OUT_PTU | M3)}, /* led status_1 */
- {PAD0_FREF_CLK4_OUT, (PTU | OFF_EN | OFF_OUT_PTU | M3)}, /* led status_2 */
- {PAD1_SYS_32K, (IEN | M0)}, /* sys_32k */
- {PAD0_SYS_NRESPWRON, (M0)}, /* sys_nrespwron */
- {PAD1_SYS_NRESWARM, (M0)}, /* sys_nreswarm */
- {PAD0_SYS_PWR_REQ, (PTU | M0)}, /* sys_pwr_req */
- {PAD1_SYS_PWRON_RESET, (M3)}, /* gpio_wk29 */
- {PAD0_SYS_BOOT6, (IEN | M3)}, /* gpio_wk9 */
- {PAD1_SYS_BOOT7, (IEN | M3)}, /* gpio_wk10 */
-};
-
-#endif
diff --git a/board/ti/sdp4430/sdp.h b/board/ti/panda/panda_mux_data.h
similarity index 76%
rename from board/ti/sdp4430/sdp.h
rename to board/ti/panda/panda_mux_data.h
index bf41067..16cc0ad 100644
--- a/board/ti/sdp4430/sdp.h
+++ b/board/ti/panda/panda_mux_data.h
@@ -23,22 +23,12 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
+#ifndef _SDP4430_MUX_DATA_H
+#define _SDP4430_MUX_DATA_H
-#ifndef _SDP_H_
-#define _SDP_H_
-
-#include <asm/io.h>
#include <asm/arch/mux_omap4.h>
-const struct pad_conf_entry core_padconf_array[] = {
- {GPMC_AD0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat0 */
- {GPMC_AD1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat1 */
- {GPMC_AD2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat2 */
- {GPMC_AD3, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat3 */
- {GPMC_AD4, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat4 */
- {GPMC_AD5, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat5 */
- {GPMC_AD6, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat6 */
- {GPMC_AD7, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat7 */
+const struct pad_conf_entry core_padconf_array_non_essential[] = {
{GPMC_AD8, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M3)}, /* gpio_32 */
{GPMC_AD9, (PTU | IEN | M3)}, /* gpio_33 */
{GPMC_AD10, (PTU | IEN | M3)}, /* gpio_34 */
@@ -64,8 +54,6 @@
{GPMC_NWP, (M3)}, /* gpio_54 */
{GPMC_CLK, (PTD | M3)}, /* gpio_55 */
{GPMC_NADV_ALE, (M3)}, /* gpio_56 */
- {GPMC_NOE, (PTU | IEN | OFF_EN | OFF_OUT_PTD | M1)}, /* sdmmc2_clk */
- {GPMC_NWE, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_cmd */
{GPMC_NBE0_CLE, (M3)}, /* gpio_59 */
{GPMC_NBE1, (PTD | M3)}, /* gpio_60 */
{GPMC_WAIT0, (PTU | IEN | M3)}, /* gpio_61 */
@@ -96,14 +84,14 @@
{CAM_SHUTTER, (OFF_EN | OFF_PD | OFF_OUT_PTD | M0)}, /* cam_shutter */
{CAM_STROBE, (OFF_EN | OFF_PD | OFF_OUT_PTD | M0)}, /* cam_strobe */
{CAM_GLOBALRESET, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)}, /* gpio_83 */
- {USBB1_ULPITLL_CLK, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M4)},/* usbb1_ulpiphy_clk */
- {USBB1_ULPITLL_STP, (OFF_EN | OFF_OUT_PTD | M4)}, /* usbb1_ulpiphy_stp */
- {USBB1_ULPITLL_DIR, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dir */
- {USBB1_ULPITLL_NXT, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_nxt */
- {USBB1_ULPITLL_DAT0, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat0 */
- {USBB1_ULPITLL_DAT1, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat1 */
- {USBB1_ULPITLL_DAT2, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat2 */
- {USBB1_ULPITLL_DAT3, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat3 */
+ {USBB1_ULPITLL_CLK, (IEN | OFF_EN | OFF_IN | M1)}, /* hsi1_cawake */
+ {USBB1_ULPITLL_STP, (IEN | OFF_EN | OFF_IN | M1)}, /* hsi1_cadata */
+ {USBB1_ULPITLL_DIR, (IEN | OFF_EN | OFF_IN | M1)}, /* hsi1_caflag */
+ {USBB1_ULPITLL_NXT, (OFF_EN | M1)}, /* hsi1_acready */
+ {USBB1_ULPITLL_DAT0, (OFF_EN | M1)}, /* hsi1_acwake */
+ {USBB1_ULPITLL_DAT1, (OFF_EN | M1)}, /* hsi1_acdata */
+ {USBB1_ULPITLL_DAT2, (OFF_EN | M1)}, /* hsi1_acflag */
+ {USBB1_ULPITLL_DAT3, (IEN | OFF_EN | OFF_IN | M1)}, /* hsi1_caready */
{USBB1_ULPITLL_DAT4, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat4 */
{USBB1_ULPITLL_DAT5, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat5 */
{USBB1_ULPITLL_DAT6, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat6 */
@@ -112,22 +100,12 @@
{USBB1_HSIC_STROBE, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* usbb1_hsic_strobe */
{USBC1_ICUSB_DP, (IEN | M0)}, /* usbc1_icusb_dp */
{USBC1_ICUSB_DM, (IEN | M0)}, /* usbc1_icusb_dm */
- {SDMMC1_CLK, (PTU | OFF_EN | OFF_OUT_PTD | M0)}, /* sdmmc1_clk */
- {SDMMC1_CMD, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_cmd */
- {SDMMC1_DAT0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat0 */
- {SDMMC1_DAT1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat1 */
- {SDMMC1_DAT2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat2 */
- {SDMMC1_DAT3, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat3 */
- {SDMMC1_DAT4, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat4 */
- {SDMMC1_DAT5, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat5 */
- {SDMMC1_DAT6, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat6 */
- {SDMMC1_DAT7, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat7 */
{ABE_MCBSP2_CLKX, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_mcbsp2_clkx */
{ABE_MCBSP2_DR, (IEN | OFF_EN | OFF_OUT_PTD | M0)}, /* abe_mcbsp2_dr */
{ABE_MCBSP2_DX, (OFF_EN | OFF_OUT_PTD | M0)}, /* abe_mcbsp2_dx */
{ABE_MCBSP2_FSX, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_mcbsp2_fsx */
- {ABE_MCBSP1_CLKX, (IEN | M1)}, /* abe_slimbus1_clock */
- {ABE_MCBSP1_DR, (IEN | M1)}, /* abe_slimbus1_data */
+ {ABE_MCBSP1_CLKX, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_mcbsp1_clkx */
+ {ABE_MCBSP1_DR, (IEN | OFF_EN | OFF_OUT_PTD | M0)}, /* abe_mcbsp1_dr */
{ABE_MCBSP1_DX, (OFF_EN | OFF_OUT_PTD | M0)}, /* abe_mcbsp1_dx */
{ABE_MCBSP1_FSX, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_mcbsp1_fsx */
{ABE_PDM_UL_DATA, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_pdm_ul_data */
@@ -144,14 +122,6 @@
{UART2_RX, (PTU | IEN | M0)}, /* uart2_rx */
{UART2_TX, (M0)}, /* uart2_tx */
{HDQ_SIO, (M3)}, /* gpio_127 */
- {I2C1_SCL, (PTU | IEN | M0)}, /* i2c1_scl */
- {I2C1_SDA, (PTU | IEN | M0)}, /* i2c1_sda */
- {I2C2_SCL, (PTU | IEN | M0)}, /* i2c2_scl */
- {I2C2_SDA, (PTU | IEN | M0)}, /* i2c2_sda */
- {I2C3_SCL, (PTU | IEN | M0)}, /* i2c3_scl */
- {I2C3_SDA, (PTU | IEN | M0)}, /* i2c3_sda */
- {I2C4_SCL, (PTU | IEN | M0)}, /* i2c4_scl */
- {I2C4_SDA, (PTU | IEN | M0)}, /* i2c4_sda */
{MCSPI1_CLK, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi1_clk */
{MCSPI1_SOMI, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi1_somi */
{MCSPI1_SIMO, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi1_simo */
@@ -159,10 +129,6 @@
{MCSPI1_CS1, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M3)}, /* mcspi1_cs1 */
{MCSPI1_CS2, (PTU | OFF_EN | OFF_OUT_PTU | M3)}, /* gpio_139 */
{MCSPI1_CS3, (PTU | IEN | M3)}, /* gpio_140 */
- {UART3_CTS_RCTX, (PTU | IEN | M0)}, /* uart3_tx */
- {UART3_RTS_SD, (M0)}, /* uart3_rts_sd */
- {UART3_RX_IRRX, (IEN | M0)}, /* uart3_rx */
- {UART3_TX_IRTX, (M0)}, /* uart3_tx */
{SDMMC5_CLK, (PTU | IEN | OFF_EN | OFF_OUT_PTD | M0)}, /* sdmmc5_clk */
{SDMMC5_CMD, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc5_cmd */
{SDMMC5_DAT0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc5_dat0 */
@@ -175,7 +141,7 @@
{MCSPI4_CS0, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi4_cs0 */
{UART4_RX, (IEN | M0)}, /* uart4_rx */
{UART4_TX, (M0)}, /* uart4_tx */
- {USBB2_ULPITLL_CLK, (IEN | M3)}, /* gpio_157 */
+ {USBB2_ULPITLL_CLK, (PTD | IEN | M3)}, /* gpio_157 */
{USBB2_ULPITLL_STP, (IEN | M5)}, /* dispc2_data23 */
{USBB2_ULPITLL_DIR, (IEN | M5)}, /* dispc2_data22 */
{USBB2_ULPITLL_NXT, (IEN | M5)}, /* dispc2_data21 */
@@ -207,11 +173,11 @@
{FREF_CLK1_OUT, (M0)}, /* fref_clk1_out */
{FREF_CLK2_OUT, (M0)}, /* fref_clk2_out */
{SYS_NIRQ1, (PTU | IEN | M0)}, /* sys_nirq1 */
- {SYS_NIRQ2, (PTU | IEN | M0)}, /* sys_nirq2 */
+ {SYS_NIRQ2, (M7)}, /* sys_nirq2 */
{SYS_BOOT0, (PTU | IEN | M3)}, /* gpio_184 */
{SYS_BOOT1, (M3)}, /* gpio_185 */
{SYS_BOOT2, (PTD | IEN | M3)}, /* gpio_186 */
- {SYS_BOOT3, (M3)}, /* gpio_187 */
+ {SYS_BOOT3, (PTD | IEN | M3)}, /* gpio_187 */
{SYS_BOOT4, (M3)}, /* gpio_188 */
{SYS_BOOT5, (PTD | IEN | M3)}, /* gpio_189 */
{DPM_EMU0, (IEN | M0)}, /* dpm_emu0 */
@@ -236,14 +202,12 @@
{DPM_EMU19, (IEN | M5)}, /* dispc2_data0 */
};
-const struct pad_conf_entry wkup_padconf_array[] = {
+const struct pad_conf_entry wkup_padconf_array_non_essential[] = {
{PAD0_SIM_IO, (IEN | M0)}, /* sim_io */
{PAD1_SIM_CLK, (M0)}, /* sim_clk */
{PAD0_SIM_RESET, (M0)}, /* sim_reset */
{PAD1_SIM_CD, (PTU | IEN | M0)}, /* sim_cd */
{PAD0_SIM_PWRCTRL, (M0)}, /* sim_pwrctrl */
- {PAD1_SR_SCL, (PTU | IEN | M0)}, /* sr_scl */
- {PAD0_SR_SDA, (PTU | IEN | M0)}, /* sr_sda */
{PAD1_FREF_XTAL_IN, (M0)}, /* # */
{PAD0_FREF_SLICER_IN, (M0)}, /* fref_slicer_in */
{PAD1_FREF_CLK_IOREQ, (M0)}, /* fref_clk_ioreq */
@@ -252,13 +216,15 @@
{PAD0_FREF_CLK3_OUT, (M0)}, /* fref_clk3_out */
{PAD1_FREF_CLK4_REQ, (PTU | IEN | M0)}, /* # */
{PAD0_FREF_CLK4_OUT, (M0)}, /* # */
- {PAD1_SYS_32K, (IEN | M0)}, /* sys_32k */
{PAD0_SYS_NRESPWRON, (M0)}, /* sys_nrespwron */
{PAD1_SYS_NRESWARM, (M0)}, /* sys_nreswarm */
{PAD0_SYS_PWR_REQ, (PTU | M0)}, /* sys_pwr_req */
{PAD1_SYS_PWRON_RESET, (M3)}, /* gpio_wk29 */
{PAD0_SYS_BOOT6, (IEN | M3)}, /* gpio_wk9 */
{PAD1_SYS_BOOT7, (IEN | M3)}, /* gpio_wk10 */
+ {PAD1_FREF_CLK3_REQ, (M3)}, /* gpio_wk30 */
+ {PAD1_FREF_CLK4_REQ, (M3)}, /* gpio_wk7 */
+ {PAD0_FREF_CLK4_OUT, (M3)}, /* gpio_wk8 */
};
-#endif
+#endif /* _SDP4430_MUX_DATA_H */
diff --git a/board/ti/sdp4430/Makefile b/board/ti/sdp4430/Makefile
index f1ee544..12f2743 100644
--- a/board/ti/sdp4430/Makefile
+++ b/board/ti/sdp4430/Makefile
@@ -25,7 +25,9 @@
LIB = $(obj)lib$(BOARD).o
+ifndef CONFIG_SPL_BUILD
COBJS := sdp.o cmd_bat.o
+endif
SRCS := $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
diff --git a/board/ti/sdp4430/config.mk b/board/ti/sdp4430/config.mk
deleted file mode 100644
index 33901a7..0000000
--- a/board/ti/sdp4430/config.mk
+++ /dev/null
@@ -1,31 +0,0 @@
-#
-# (C) Copyright 2006-2009
-# Texas Instruments Incorporated, <www.ti.com>
-#
-# OMAP 4430 SDP
-# see http://www.ti.com/ for more information on Texas Instruments
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-# SDRAM Address Space:
-# 8000'0000 - 9fff'ffff (512 MB)
-# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
-# (mem base + reserved)
-
-CONFIG_SYS_TEXT_BASE = 0x80e80000
diff --git a/board/ti/sdp4430/sdp.c b/board/ti/sdp4430/sdp.c
index b13c4c5..a5ea682 100644
--- a/board/ti/sdp4430/sdp.c
+++ b/board/ti/sdp4430/sdp.c
@@ -27,7 +27,7 @@
#include <asm/arch/sys_proto.h>
#include <asm/arch/mmc_host_def.h>
-#include "sdp.h"
+#include "sdp4430_mux_data.h"
DECLARE_GLOBAL_DATA_PTR;
@@ -70,27 +70,14 @@
return 0;
}
-void do_set_mux(u32 base, struct pad_conf_entry const *array, int size)
+void set_muxconf_regs_non_essential(void)
{
- int i;
- struct pad_conf_entry *pad = (struct pad_conf_entry *) array;
-
- for (i = 0; i < size; i++, pad++)
- writew(pad->val, base + pad->offset);
-}
-
-/**
- * @brief set_muxconf_regs Setting up the configuration Mux registers
- * specific to the board.
- */
-void set_muxconf_regs(void)
-{
- do_set_mux(CONTROL_PADCONF_CORE, core_padconf_array,
- sizeof(core_padconf_array) /
+ do_set_mux(CONTROL_PADCONF_CORE, core_padconf_array_non_essential,
+ sizeof(core_padconf_array_non_essential) /
sizeof(struct pad_conf_entry));
- do_set_mux(CONTROL_PADCONF_WKUP, wkup_padconf_array,
- sizeof(wkup_padconf_array) /
+ do_set_mux(CONTROL_PADCONF_WKUP, wkup_padconf_array_non_essential,
+ sizeof(wkup_padconf_array_non_essential) /
sizeof(struct pad_conf_entry));
}
diff --git a/board/ti/sdp4430/sdp.h b/board/ti/sdp4430/sdp4430_mux_data.h
similarity index 76%
copy from board/ti/sdp4430/sdp.h
copy to board/ti/sdp4430/sdp4430_mux_data.h
index bf41067..16cc0ad 100644
--- a/board/ti/sdp4430/sdp.h
+++ b/board/ti/sdp4430/sdp4430_mux_data.h
@@ -23,22 +23,12 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
+#ifndef _SDP4430_MUX_DATA_H
+#define _SDP4430_MUX_DATA_H
-#ifndef _SDP_H_
-#define _SDP_H_
-
-#include <asm/io.h>
#include <asm/arch/mux_omap4.h>
-const struct pad_conf_entry core_padconf_array[] = {
- {GPMC_AD0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat0 */
- {GPMC_AD1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat1 */
- {GPMC_AD2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat2 */
- {GPMC_AD3, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat3 */
- {GPMC_AD4, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat4 */
- {GPMC_AD5, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat5 */
- {GPMC_AD6, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat6 */
- {GPMC_AD7, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat7 */
+const struct pad_conf_entry core_padconf_array_non_essential[] = {
{GPMC_AD8, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M3)}, /* gpio_32 */
{GPMC_AD9, (PTU | IEN | M3)}, /* gpio_33 */
{GPMC_AD10, (PTU | IEN | M3)}, /* gpio_34 */
@@ -64,8 +54,6 @@
{GPMC_NWP, (M3)}, /* gpio_54 */
{GPMC_CLK, (PTD | M3)}, /* gpio_55 */
{GPMC_NADV_ALE, (M3)}, /* gpio_56 */
- {GPMC_NOE, (PTU | IEN | OFF_EN | OFF_OUT_PTD | M1)}, /* sdmmc2_clk */
- {GPMC_NWE, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_cmd */
{GPMC_NBE0_CLE, (M3)}, /* gpio_59 */
{GPMC_NBE1, (PTD | M3)}, /* gpio_60 */
{GPMC_WAIT0, (PTU | IEN | M3)}, /* gpio_61 */
@@ -96,14 +84,14 @@
{CAM_SHUTTER, (OFF_EN | OFF_PD | OFF_OUT_PTD | M0)}, /* cam_shutter */
{CAM_STROBE, (OFF_EN | OFF_PD | OFF_OUT_PTD | M0)}, /* cam_strobe */
{CAM_GLOBALRESET, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)}, /* gpio_83 */
- {USBB1_ULPITLL_CLK, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M4)},/* usbb1_ulpiphy_clk */
- {USBB1_ULPITLL_STP, (OFF_EN | OFF_OUT_PTD | M4)}, /* usbb1_ulpiphy_stp */
- {USBB1_ULPITLL_DIR, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dir */
- {USBB1_ULPITLL_NXT, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_nxt */
- {USBB1_ULPITLL_DAT0, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat0 */
- {USBB1_ULPITLL_DAT1, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat1 */
- {USBB1_ULPITLL_DAT2, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat2 */
- {USBB1_ULPITLL_DAT3, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat3 */
+ {USBB1_ULPITLL_CLK, (IEN | OFF_EN | OFF_IN | M1)}, /* hsi1_cawake */
+ {USBB1_ULPITLL_STP, (IEN | OFF_EN | OFF_IN | M1)}, /* hsi1_cadata */
+ {USBB1_ULPITLL_DIR, (IEN | OFF_EN | OFF_IN | M1)}, /* hsi1_caflag */
+ {USBB1_ULPITLL_NXT, (OFF_EN | M1)}, /* hsi1_acready */
+ {USBB1_ULPITLL_DAT0, (OFF_EN | M1)}, /* hsi1_acwake */
+ {USBB1_ULPITLL_DAT1, (OFF_EN | M1)}, /* hsi1_acdata */
+ {USBB1_ULPITLL_DAT2, (OFF_EN | M1)}, /* hsi1_acflag */
+ {USBB1_ULPITLL_DAT3, (IEN | OFF_EN | OFF_IN | M1)}, /* hsi1_caready */
{USBB1_ULPITLL_DAT4, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat4 */
{USBB1_ULPITLL_DAT5, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat5 */
{USBB1_ULPITLL_DAT6, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat6 */
@@ -112,22 +100,12 @@
{USBB1_HSIC_STROBE, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* usbb1_hsic_strobe */
{USBC1_ICUSB_DP, (IEN | M0)}, /* usbc1_icusb_dp */
{USBC1_ICUSB_DM, (IEN | M0)}, /* usbc1_icusb_dm */
- {SDMMC1_CLK, (PTU | OFF_EN | OFF_OUT_PTD | M0)}, /* sdmmc1_clk */
- {SDMMC1_CMD, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_cmd */
- {SDMMC1_DAT0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat0 */
- {SDMMC1_DAT1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat1 */
- {SDMMC1_DAT2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat2 */
- {SDMMC1_DAT3, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat3 */
- {SDMMC1_DAT4, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat4 */
- {SDMMC1_DAT5, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat5 */
- {SDMMC1_DAT6, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat6 */
- {SDMMC1_DAT7, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat7 */
{ABE_MCBSP2_CLKX, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_mcbsp2_clkx */
{ABE_MCBSP2_DR, (IEN | OFF_EN | OFF_OUT_PTD | M0)}, /* abe_mcbsp2_dr */
{ABE_MCBSP2_DX, (OFF_EN | OFF_OUT_PTD | M0)}, /* abe_mcbsp2_dx */
{ABE_MCBSP2_FSX, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_mcbsp2_fsx */
- {ABE_MCBSP1_CLKX, (IEN | M1)}, /* abe_slimbus1_clock */
- {ABE_MCBSP1_DR, (IEN | M1)}, /* abe_slimbus1_data */
+ {ABE_MCBSP1_CLKX, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_mcbsp1_clkx */
+ {ABE_MCBSP1_DR, (IEN | OFF_EN | OFF_OUT_PTD | M0)}, /* abe_mcbsp1_dr */
{ABE_MCBSP1_DX, (OFF_EN | OFF_OUT_PTD | M0)}, /* abe_mcbsp1_dx */
{ABE_MCBSP1_FSX, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_mcbsp1_fsx */
{ABE_PDM_UL_DATA, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_pdm_ul_data */
@@ -144,14 +122,6 @@
{UART2_RX, (PTU | IEN | M0)}, /* uart2_rx */
{UART2_TX, (M0)}, /* uart2_tx */
{HDQ_SIO, (M3)}, /* gpio_127 */
- {I2C1_SCL, (PTU | IEN | M0)}, /* i2c1_scl */
- {I2C1_SDA, (PTU | IEN | M0)}, /* i2c1_sda */
- {I2C2_SCL, (PTU | IEN | M0)}, /* i2c2_scl */
- {I2C2_SDA, (PTU | IEN | M0)}, /* i2c2_sda */
- {I2C3_SCL, (PTU | IEN | M0)}, /* i2c3_scl */
- {I2C3_SDA, (PTU | IEN | M0)}, /* i2c3_sda */
- {I2C4_SCL, (PTU | IEN | M0)}, /* i2c4_scl */
- {I2C4_SDA, (PTU | IEN | M0)}, /* i2c4_sda */
{MCSPI1_CLK, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi1_clk */
{MCSPI1_SOMI, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi1_somi */
{MCSPI1_SIMO, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi1_simo */
@@ -159,10 +129,6 @@
{MCSPI1_CS1, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M3)}, /* mcspi1_cs1 */
{MCSPI1_CS2, (PTU | OFF_EN | OFF_OUT_PTU | M3)}, /* gpio_139 */
{MCSPI1_CS3, (PTU | IEN | M3)}, /* gpio_140 */
- {UART3_CTS_RCTX, (PTU | IEN | M0)}, /* uart3_tx */
- {UART3_RTS_SD, (M0)}, /* uart3_rts_sd */
- {UART3_RX_IRRX, (IEN | M0)}, /* uart3_rx */
- {UART3_TX_IRTX, (M0)}, /* uart3_tx */
{SDMMC5_CLK, (PTU | IEN | OFF_EN | OFF_OUT_PTD | M0)}, /* sdmmc5_clk */
{SDMMC5_CMD, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc5_cmd */
{SDMMC5_DAT0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc5_dat0 */
@@ -175,7 +141,7 @@
{MCSPI4_CS0, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi4_cs0 */
{UART4_RX, (IEN | M0)}, /* uart4_rx */
{UART4_TX, (M0)}, /* uart4_tx */
- {USBB2_ULPITLL_CLK, (IEN | M3)}, /* gpio_157 */
+ {USBB2_ULPITLL_CLK, (PTD | IEN | M3)}, /* gpio_157 */
{USBB2_ULPITLL_STP, (IEN | M5)}, /* dispc2_data23 */
{USBB2_ULPITLL_DIR, (IEN | M5)}, /* dispc2_data22 */
{USBB2_ULPITLL_NXT, (IEN | M5)}, /* dispc2_data21 */
@@ -207,11 +173,11 @@
{FREF_CLK1_OUT, (M0)}, /* fref_clk1_out */
{FREF_CLK2_OUT, (M0)}, /* fref_clk2_out */
{SYS_NIRQ1, (PTU | IEN | M0)}, /* sys_nirq1 */
- {SYS_NIRQ2, (PTU | IEN | M0)}, /* sys_nirq2 */
+ {SYS_NIRQ2, (M7)}, /* sys_nirq2 */
{SYS_BOOT0, (PTU | IEN | M3)}, /* gpio_184 */
{SYS_BOOT1, (M3)}, /* gpio_185 */
{SYS_BOOT2, (PTD | IEN | M3)}, /* gpio_186 */
- {SYS_BOOT3, (M3)}, /* gpio_187 */
+ {SYS_BOOT3, (PTD | IEN | M3)}, /* gpio_187 */
{SYS_BOOT4, (M3)}, /* gpio_188 */
{SYS_BOOT5, (PTD | IEN | M3)}, /* gpio_189 */
{DPM_EMU0, (IEN | M0)}, /* dpm_emu0 */
@@ -236,14 +202,12 @@
{DPM_EMU19, (IEN | M5)}, /* dispc2_data0 */
};
-const struct pad_conf_entry wkup_padconf_array[] = {
+const struct pad_conf_entry wkup_padconf_array_non_essential[] = {
{PAD0_SIM_IO, (IEN | M0)}, /* sim_io */
{PAD1_SIM_CLK, (M0)}, /* sim_clk */
{PAD0_SIM_RESET, (M0)}, /* sim_reset */
{PAD1_SIM_CD, (PTU | IEN | M0)}, /* sim_cd */
{PAD0_SIM_PWRCTRL, (M0)}, /* sim_pwrctrl */
- {PAD1_SR_SCL, (PTU | IEN | M0)}, /* sr_scl */
- {PAD0_SR_SDA, (PTU | IEN | M0)}, /* sr_sda */
{PAD1_FREF_XTAL_IN, (M0)}, /* # */
{PAD0_FREF_SLICER_IN, (M0)}, /* fref_slicer_in */
{PAD1_FREF_CLK_IOREQ, (M0)}, /* fref_clk_ioreq */
@@ -252,13 +216,15 @@
{PAD0_FREF_CLK3_OUT, (M0)}, /* fref_clk3_out */
{PAD1_FREF_CLK4_REQ, (PTU | IEN | M0)}, /* # */
{PAD0_FREF_CLK4_OUT, (M0)}, /* # */
- {PAD1_SYS_32K, (IEN | M0)}, /* sys_32k */
{PAD0_SYS_NRESPWRON, (M0)}, /* sys_nrespwron */
{PAD1_SYS_NRESWARM, (M0)}, /* sys_nreswarm */
{PAD0_SYS_PWR_REQ, (PTU | M0)}, /* sys_pwr_req */
{PAD1_SYS_PWRON_RESET, (M3)}, /* gpio_wk29 */
{PAD0_SYS_BOOT6, (IEN | M3)}, /* gpio_wk9 */
{PAD1_SYS_BOOT7, (IEN | M3)}, /* gpio_wk10 */
+ {PAD1_FREF_CLK3_REQ, (M3)}, /* gpio_wk30 */
+ {PAD1_FREF_CLK4_REQ, (M3)}, /* gpio_wk7 */
+ {PAD0_FREF_CLK4_OUT, (M3)}, /* gpio_wk8 */
};
-#endif
+#endif /* _SDP4430_MUX_DATA_H */
diff --git a/boards.cfg b/boards.cfg
index 3e79c82..6827cf3 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -71,15 +71,32 @@
netstar arm arm925t
voiceblue arm arm925t
omap1510inn arm arm925t - ti
+versatileqemu arm arm926ejs versatile armltd versatile versatile:ARCH_VERSATILE_QEMU
+versatilepb arm arm926ejs versatile armltd versatile versatile:ARCH_VERSATILE_PB
+versatileab arm arm926ejs versatile armltd versatile versatile:ARCH_VERSATILE_AB
aspenite arm arm926ejs - Marvell armada100
+gplugd arm arm926ejs - Marvell armada100
afeb9260 arm arm926ejs - - at91
at91cap9adk arm arm926ejs - atmel at91
at91sam9260ek_nandflash arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9260,SYS_USE_NANDFLASH
at91sam9260ek_dataflash_cs0 arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9260,SYS_USE_DATAFLASH_CS0
at91sam9260ek_dataflash_cs1 arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9260,SYS_USE_DATAFLASH_CS1
+at91sam9261ek_nandflash arm arm926ejs at91sam9261ek atmel at91 at91sam9261ek:AT91SAM9261,SYS_USE_NANDFLASH
+at91sam9261ek_dataflash_cs0 arm arm926ejs at91sam9261ek atmel at91 at91sam9261ek:AT91SAM9261,SYS_USE_DATAFLASH_CS0
+at91sam9261ek_dataflash_cs3 arm arm926ejs at91sam9261ek atmel at91 at91sam9261ek:AT91SAM9261,SYS_USE_DATAFLASH_CS3
+at91sam9263ek_nandflash arm arm926ejs at91sam9263ek atmel at91 at91sam9263ek:AT91SAM9263,SYS_USE_NANDFLASH
+at91sam9263ek_dataflash_cs0 arm arm926ejs at91sam9263ek atmel at91 at91sam9263ek:AT91SAM9263,SYS_USE_DATAFLASH
+at91sam9263ek_dataflash arm arm926ejs at91sam9263ek atmel at91 at91sam9263ek:AT91SAM9263,SYS_USE_DATAFLASH
+at91sam9263ek_norflash arm arm926ejs at91sam9263ek atmel at91 at91sam9263ek:AT91SAM9263,SYS_USE_NORFLASH
+at91sam9263ek_norflash_boot arm arm926ejs at91sam9263ek atmel at91 at91sam9263ek:AT91SAM9263,SYS_USE_BOOT_NORFLASH
+at91sam9g10ek_nandflash arm arm926ejs at91sam9261ek atmel at91 at91sam9261ek:AT91SAM9G10,SYS_USE_NANDFLASH
+at91sam9g10ek_dataflash_cs0 arm arm926ejs at91sam9261ek atmel at91 at91sam9261ek:AT91SAM9G10,SYS_USE_DATAFLASH_CS0
+at91sam9g10ek_dataflash_cs3 arm arm926ejs at91sam9261ek atmel at91 at91sam9261ek:AT91SAM9G10,SYS_USE_DATAFLASH_CS3
at91sam9g20ek_nandflash arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9G20,SYS_USE_NANDFLASH
at91sam9g20ek_dataflash_cs0 arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9G20,SYS_USE_DATAFLASH_CS0
at91sam9g20ek_dataflash_cs1 arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9G20,SYS_USE_DATAFLASH_CS1
+at91sam9rlek_nandflash arm arm926ejs at91sam9rlek atmel at91 at91sam9rlek:AT91SAM9RL,SYS_USE_NANDFLASH
+at91sam9rlek_dataflash arm arm926ejs at91sam9rlek atmel at91 at91sam9rlek:AT91SAM9RL,SYS_USE_DATAFLASH
at91sam9xeek_nandflash arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9XE,SYS_USE_NANDFLASH
at91sam9xeek_dataflash_cs0 arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9XE,SYS_USE_DATAFLASH_CS0
at91sam9xeek_dataflash_cs1 arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9XE,SYS_USE_DATAFLASH_CS1
@@ -215,6 +232,7 @@
atstk1004 avr32 at32ap atstk1000 atmel at32ap700x
atstk1006 avr32 at32ap atstk1000 atmel at32ap700x
favr-32-ezkit avr32 at32ap - earthlcd at32ap700x
+grasshopper avr32 at32ap - in-circuit at32ap700x
mimc200 avr32 at32ap - mimc at32ap700x
hammerhead avr32 at32ap - miromico at32ap700x
bct-brettl2 blackfin blackfin
diff --git a/common/image.c b/common/image.c
index f175541..5eea2a1 100644
--- a/common/image.c
+++ b/common/image.c
@@ -130,11 +130,15 @@
};
static const table_entry_t uimage_type[] = {
- { IH_TYPE_INVALID, NULL, "Invalid Image", },
{ IH_TYPE_FILESYSTEM, "filesystem", "Filesystem Image", },
{ IH_TYPE_FIRMWARE, "firmware", "Firmware", },
+ { IH_TYPE_FLATDT, "flat_dt", "Flat Device Tree", },
+ { IH_TYPE_INVALID, NULL, "Invalid Image", },
+ { IH_TYPE_IMXIMAGE, "imximage", "Freescale i.MX Boot Image",},
{ IH_TYPE_KERNEL, "kernel", "Kernel Image", },
+ { IH_TYPE_KWBIMAGE, "kwbimage", "Kirkwood Boot Image",},
{ IH_TYPE_MULTI, "multi", "Multi-File Image", },
+ { IH_TYPE_OMAPIMAGE, "omapimage", "TI OMAP SPL With GP CH",},
{ IH_TYPE_RAMDISK, "ramdisk", "RAMDisk Image", },
{ IH_TYPE_SCRIPT, "script", "Script", },
{ IH_TYPE_STANDALONE, "standalone", "Standalone Program", },
diff --git a/doc/README.at91-soc b/doc/README.at91-soc
index 425fc58..ed6e76a 100644
--- a/doc/README.at91-soc
+++ b/doc/README.at91-soc
@@ -40,25 +40,3 @@
4. Convert arch, driver and boards file to new SoC
5. remove legacy code, if all boards and drives are ready
- Join AT91 and AT91RM9200 SoC
-==============================
-
-Approximately 95 percent of AT91 and AT91RM9200 SoC parts are the same.
-So, we should use the chance, to join both archs togetter.
-
-To do this follow step needed:
-
-1. change Makefile
- @$(MKCONFIG) $(@:_config=) arm arm920t board vendor at91rm9200
- to
- @$(MKCONFIG) $(@:_config=) arm arm920t board vendor at91
-2. remove CONFIG_AT91_LEGACY in board config
-3. convert boards file to new SoC access
-4. convert or change drivers
-
-To support the joining process, a new SoC dir (at91) has been adding to
-arm920t arch directory. This directory contains files like at91rm9200 dir, but
-uses the new c structure Soc access. The advantage of this is, we don't merge
-old Soc access code and new code while the board are not converted.
-Finally we can delete the whole at91rm9200 dir, if all board support the
-new AT91-SoC access.
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 1e3ae11..62ec97d 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -32,6 +32,7 @@
COBJS-$(CONFIG_PCA953X) += pca953x.o
COBJS-$(CONFIG_S5P) += s5p_gpio.o
COBJS-$(CONFIG_TEGRA2_GPIO) += tegra2_gpio.o
+COBJS-$(CONFIG_DA8XX_GPIO) += da8xx_gpio.o
COBJS := $(COBJS-y)
SRCS := $(COBJS:.o=.c)
diff --git a/drivers/gpio/da8xx_gpio.c b/drivers/gpio/da8xx_gpio.c
new file mode 100644
index 0000000..0308223
--- /dev/null
+++ b/drivers/gpio/da8xx_gpio.c
@@ -0,0 +1,281 @@
+/*
+ * GPIO driver for TI DaVinci DA8xx SOCs.
+ *
+ * (C) Copyright 2011 Guralp Systems Ltd.
+ * Laurence Withers <lwithers@guralp.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/gpio.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/davinci_misc.h>
+
+
+static struct gpio_registry {
+ int is_registered;
+ char name[GPIO_NAME_SIZE];
+} gpio_registry[MAX_NUM_GPIOS];
+
+
+#define pinmux(x) (&davinci_syscfg_regs->pinmux[x])
+
+static const struct pinmux_config gpio_pinmux[] = {
+ { pinmux(1), 8, 7 }, /* GP0[0] */
+ { pinmux(1), 8, 6 },
+ { pinmux(1), 8, 5 },
+ { pinmux(1), 8, 4 },
+ { pinmux(1), 8, 3 },
+ { pinmux(1), 8, 2 },
+ { pinmux(1), 8, 1 },
+ { pinmux(1), 8, 0 },
+ { pinmux(0), 8, 7 },
+ { pinmux(0), 8, 6 },
+ { pinmux(0), 8, 5 },
+ { pinmux(0), 8, 4 },
+ { pinmux(0), 8, 3 },
+ { pinmux(0), 8, 2 },
+ { pinmux(0), 8, 1 },
+ { pinmux(0), 8, 0 },
+ { pinmux(4), 8, 7 }, /* GP1[0] */
+ { pinmux(4), 8, 6 },
+ { pinmux(4), 8, 5 },
+ { pinmux(4), 8, 4 },
+ { pinmux(4), 8, 3 },
+ { pinmux(4), 8, 2 },
+ { pinmux(4), 4, 1 },
+ { pinmux(4), 4, 0 },
+ { pinmux(3), 4, 0 },
+ { pinmux(2), 4, 6 },
+ { pinmux(2), 4, 5 },
+ { pinmux(2), 4, 4 },
+ { pinmux(2), 4, 3 },
+ { pinmux(2), 4, 2 },
+ { pinmux(2), 4, 1 },
+ { pinmux(2), 8, 0 },
+ { pinmux(6), 8, 7 }, /* GP2[0] */
+ { pinmux(6), 8, 6 },
+ { pinmux(6), 8, 5 },
+ { pinmux(6), 8, 4 },
+ { pinmux(6), 8, 3 },
+ { pinmux(6), 8, 2 },
+ { pinmux(6), 8, 1 },
+ { pinmux(6), 8, 0 },
+ { pinmux(5), 8, 7 },
+ { pinmux(5), 8, 6 },
+ { pinmux(5), 8, 5 },
+ { pinmux(5), 8, 4 },
+ { pinmux(5), 8, 3 },
+ { pinmux(5), 8, 2 },
+ { pinmux(5), 8, 1 },
+ { pinmux(5), 8, 0 },
+ { pinmux(8), 8, 7 }, /* GP3[0] */
+ { pinmux(8), 8, 6 },
+ { pinmux(8), 8, 5 },
+ { pinmux(8), 8, 4 },
+ { pinmux(8), 8, 3 },
+ { pinmux(8), 8, 2 },
+ { pinmux(8), 8, 1 },
+ { pinmux(8), 8, 0 },
+ { pinmux(7), 8, 7 },
+ { pinmux(7), 8, 6 },
+ { pinmux(7), 8, 5 },
+ { pinmux(7), 8, 4 },
+ { pinmux(7), 8, 3 },
+ { pinmux(7), 8, 2 },
+ { pinmux(7), 8, 1 },
+ { pinmux(7), 8, 0 },
+ { pinmux(10), 8, 7 }, /* GP4[0] */
+ { pinmux(10), 8, 6 },
+ { pinmux(10), 8, 5 },
+ { pinmux(10), 8, 4 },
+ { pinmux(10), 8, 3 },
+ { pinmux(10), 8, 2 },
+ { pinmux(10), 8, 1 },
+ { pinmux(10), 8, 0 },
+ { pinmux(9), 8, 7 },
+ { pinmux(9), 8, 6 },
+ { pinmux(9), 8, 5 },
+ { pinmux(9), 8, 4 },
+ { pinmux(9), 8, 3 },
+ { pinmux(9), 8, 2 },
+ { pinmux(9), 8, 1 },
+ { pinmux(9), 8, 0 },
+ { pinmux(12), 8, 7 }, /* GP5[0] */
+ { pinmux(12), 8, 6 },
+ { pinmux(12), 8, 5 },
+ { pinmux(12), 8, 4 },
+ { pinmux(12), 8, 3 },
+ { pinmux(12), 8, 2 },
+ { pinmux(12), 8, 1 },
+ { pinmux(12), 8, 0 },
+ { pinmux(11), 8, 7 },
+ { pinmux(11), 8, 6 },
+ { pinmux(11), 8, 5 },
+ { pinmux(11), 8, 4 },
+ { pinmux(11), 8, 3 },
+ { pinmux(11), 8, 2 },
+ { pinmux(11), 8, 1 },
+ { pinmux(11), 8, 0 },
+ { pinmux(19), 8, 6 }, /* GP6[0] */
+ { pinmux(19), 8, 5 },
+ { pinmux(19), 8, 4 },
+ { pinmux(19), 8, 3 },
+ { pinmux(19), 8, 2 },
+ { pinmux(16), 8, 1 },
+ { pinmux(14), 8, 1 },
+ { pinmux(14), 8, 0 },
+ { pinmux(13), 8, 7 },
+ { pinmux(13), 8, 6 },
+ { pinmux(13), 8, 5 },
+ { pinmux(13), 8, 4 },
+ { pinmux(13), 8, 3 },
+ { pinmux(13), 8, 2 },
+ { pinmux(13), 8, 1 },
+ { pinmux(13), 8, 0 },
+ { pinmux(18), 8, 1 }, /* GP7[0] */
+ { pinmux(18), 8, 0 },
+ { pinmux(17), 8, 7 },
+ { pinmux(17), 8, 6 },
+ { pinmux(17), 8, 5 },
+ { pinmux(17), 8, 4 },
+ { pinmux(17), 8, 3 },
+ { pinmux(17), 8, 2 },
+ { pinmux(17), 8, 1 },
+ { pinmux(17), 8, 0 },
+ { pinmux(16), 8, 7 },
+ { pinmux(16), 8, 6 },
+ { pinmux(16), 8, 5 },
+ { pinmux(16), 8, 4 },
+ { pinmux(16), 8, 3 },
+ { pinmux(16), 8, 2 },
+ { pinmux(19), 8, 0 }, /* GP8[0] */
+ { pinmux(3), 4, 7 },
+ { pinmux(3), 4, 6 },
+ { pinmux(3), 4, 5 },
+ { pinmux(3), 4, 4 },
+ { pinmux(3), 4, 3 },
+ { pinmux(3), 4, 2 },
+ { pinmux(2), 4, 7 },
+ { pinmux(19), 8, 1 },
+ { pinmux(19), 8, 0 },
+ { pinmux(18), 8, 7 },
+ { pinmux(18), 8, 6 },
+ { pinmux(18), 8, 5 },
+ { pinmux(18), 8, 4 },
+ { pinmux(18), 8, 3 },
+ { pinmux(18), 8, 2 },
+};
+
+
+
+int gpio_request(int gp, const char *label)
+{
+ if (gp >= MAX_NUM_GPIOS)
+ return -1;
+
+ if (gpio_registry[gp].is_registered)
+ return -1;
+
+ gpio_registry[gp].is_registered = 1;
+ strncpy(gpio_registry[gp].name, label, GPIO_NAME_SIZE);
+ gpio_registry[gp].name[GPIO_NAME_SIZE - 1] = 0;
+
+ davinci_configure_pin_mux(&gpio_pinmux[gp], 1);
+
+ return 0;
+}
+
+
+void gpio_free(int gp)
+{
+ gpio_registry[gp].is_registered = 0;
+}
+
+
+void gpio_toggle_value(int gp)
+{
+ struct davinci_gpio *bank;
+
+ bank = GPIO_BANK(gp);
+ gpio_set_value(gp, !gpio_get_value(gp));
+}
+
+
+int gpio_direction_input(int gp)
+{
+ struct davinci_gpio *bank;
+
+ bank = GPIO_BANK(gp);
+ setbits_le32(&bank->dir, 1U << GPIO_BIT(gp));
+ return 0;
+}
+
+
+int gpio_direction_output(int gp, int value)
+{
+ struct davinci_gpio *bank;
+
+ bank = GPIO_BANK(gp);
+ clrbits_le32(&bank->dir, 1U << GPIO_BIT(gp));
+ gpio_set_value(gp, value);
+ return 0;
+}
+
+
+int gpio_get_value(int gp)
+{
+ struct davinci_gpio *bank;
+ unsigned int ip;
+
+ bank = GPIO_BANK(gp);
+ ip = in_le32(&bank->in_data) & (1U << GPIO_BIT(gp));
+ return ip ? 1 : 0;
+}
+
+
+void gpio_set_value(int gp, int value)
+{
+ struct davinci_gpio *bank;
+
+ bank = GPIO_BANK(gp);
+
+ if (value)
+ bank->set_data = 1U << GPIO_BIT(gp);
+ else
+ bank->clr_data = 1U << GPIO_BIT(gp);
+}
+
+
+void gpio_info(void)
+{
+ int gp, dir, val;
+ struct davinci_gpio *bank;
+
+ for (gp = 0; gp < MAX_NUM_GPIOS; ++gp) {
+ bank = GPIO_BANK(gp);
+ dir = in_le32(&bank->dir) & (1U << GPIO_BIT(gp));
+ val = gpio_get_value(gp);
+
+ printf("% 4d: %s: %d [%c] %s\n",
+ gp, dir ? " in" : "out", val,
+ gpio_registry[gp].is_registered ? 'x' : ' ',
+ gpio_registry[gp].name);
+ }
+}
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index e4be4a4..ca27745 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -55,6 +55,7 @@
COBJS-$(CONFIG_RTC_MK48T59) += mk48t59.o
COBJS-$(CONFIG_RTC_MPC5200) += mpc5xxx.o
COBJS-$(CONFIG_RTC_MPC8xx) += mpc8xx.o
+COBJS-$(CONFIG_RTC_MV) += mvrtc.o
COBJS-$(CONFIG_RTC_PCF8563) += pcf8563.o
COBJS-$(CONFIG_RTC_PL031) += pl031.o
COBJS-$(CONFIG_RTC_PT7C4338) += pt7c4338.o
diff --git a/drivers/rtc/mvrtc.c b/drivers/rtc/mvrtc.c
new file mode 100644
index 0000000..ccc573a
--- /dev/null
+++ b/drivers/rtc/mvrtc.c
@@ -0,0 +1,124 @@
+/*
+ * Copyright (C) 2011
+ * Jason Cooper <u-boot@lakedaemon.net>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Date & Time support for Marvell Integrated RTC
+ */
+
+#include <common.h>
+#include <command.h>
+#include <rtc.h>
+#include "mvrtc.h"
+
+/* This RTC does not support century, so we assume 20 */
+#define CENTURY 20
+
+int rtc_get(struct rtc_time *t)
+{
+ u32 time;
+ u32 date;
+ struct mvrtc_registers *mvrtc_regs;
+
+ mvrtc_regs = (struct mvrtc_registers *)KW_RTC_BASE;
+
+ /* read the time register */
+ time = readl(&mvrtc_regs->time);
+
+ /* read the date register */
+ date = readl(&mvrtc_regs->date);
+
+ /* test for 12 hour clock (can't tell if it's am/pm) */
+ if (time & MVRTC_HRFMT_MSK) {
+ printf("Error: RTC in 12 hour mode, can't determine AM/PM.\n");
+ return -1;
+ }
+
+ /* time */
+ t->tm_sec = bcd2bin((time >> MVRTC_SEC_SFT) & MVRTC_SEC_MSK);
+ t->tm_min = bcd2bin((time >> MVRTC_MIN_SFT) & MVRTC_MIN_MSK);
+ t->tm_hour = bcd2bin((time >> MVRTC_HOUR_SFT) & MVRTC_HOUR_MSK);
+ t->tm_wday = bcd2bin((time >> MVRTC_DAY_SFT) & MVRTC_DAY_MSK);
+ t->tm_wday--;
+
+ /* date */
+ t->tm_mday = bcd2bin((date >> MVRTC_DATE_SFT) & MVRTC_DATE_MSK);
+ t->tm_mon = bcd2bin((date >> MVRTC_MON_SFT) & MVRTC_MON_MSK);
+ t->tm_year = bcd2bin((date >> MVRTC_YEAR_SFT) & MVRTC_YEAR_MSK);
+ t->tm_year += CENTURY * 100;
+
+ /* not supported in this RTC */
+ t->tm_yday = 0;
+ t->tm_isdst = 0;
+
+ return 0;
+}
+
+int rtc_set(struct rtc_time *t)
+{
+ u32 time = 0; /* sets hour format bit to zero, 24hr format. */
+ u32 date = 0;
+ struct mvrtc_registers *mvrtc_regs;
+
+ mvrtc_regs = (struct mvrtc_registers *)KW_RTC_BASE;
+
+ /* check that this code isn't 80+ years old ;-) */
+ if ((t->tm_year / 100) != CENTURY)
+ printf("Warning: Only century %d supported.\n", CENTURY);
+
+ /* time */
+ time |= (bin2bcd(t->tm_sec) & MVRTC_SEC_MSK) << MVRTC_SEC_SFT;
+ time |= (bin2bcd(t->tm_min) & MVRTC_MIN_MSK) << MVRTC_MIN_SFT;
+ time |= (bin2bcd(t->tm_hour) & MVRTC_HOUR_MSK) << MVRTC_HOUR_SFT;
+ time |= (bin2bcd(t->tm_wday + 1) & MVRTC_DAY_MSK) << MVRTC_DAY_SFT;
+
+ /* date */
+ date |= (bin2bcd(t->tm_mday) & MVRTC_DATE_MSK) << MVRTC_DATE_SFT;
+ date |= (bin2bcd(t->tm_mon) & MVRTC_MON_MSK) << MVRTC_MON_SFT;
+ date |= (bin2bcd(t->tm_year % 100) & MVRTC_YEAR_MSK) << MVRTC_YEAR_SFT;
+
+ /* write the time register */
+ writel(time, &mvrtc_regs->time);
+
+ /* write the date register */
+ writel(date, &mvrtc_regs->date);
+
+ return 0;
+}
+
+void rtc_reset(void)
+{
+ u32 time;
+ u32 sec;
+ struct mvrtc_registers *mvrtc_regs;
+
+ mvrtc_regs = (struct mvrtc_registers *)KW_RTC_BASE;
+
+ /* no init routine for this RTC needed, just check that it's working */
+ time = readl(&mvrtc_regs->time);
+ sec = bcd2bin((time >> MVRTC_SEC_SFT) & MVRTC_SEC_MSK);
+ udelay(1000000);
+ time = readl(&mvrtc_regs->time);
+
+ if (sec == bcd2bin((time >> MVRTC_SEC_SFT) & MVRTC_SEC_MSK))
+ printf("Error: RTC did not increment.\n");
+}
diff --git a/drivers/rtc/mvrtc.h b/drivers/rtc/mvrtc.h
new file mode 100644
index 0000000..b9d5c6f
--- /dev/null
+++ b/drivers/rtc/mvrtc.h
@@ -0,0 +1,65 @@
+/*
+ * Copyright (C) 2011
+ * Jason Cooper <u-boot@lakedaemon.net>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Date & Time support for Marvell Integrated RTC
+ */
+
+#ifndef _MVRTC_H_
+#define _MVRTC_H_
+
+#include <asm/arch/kirkwood.h>
+#include <compiler.h>
+
+/* RTC registers */
+struct mvrtc_registers {
+ u32 time;
+ u32 date;
+};
+
+/* time register */
+#define MVRTC_SEC_SFT 0
+#define MVRTC_SEC_MSK 0x7f
+#define MVRTC_MIN_SFT 8
+#define MVRTC_MIN_MSK 0x7f
+#define MVRTC_HOUR_SFT 16
+#define MVRTC_HOUR_MSK 0x3f
+#define MVRTC_DAY_SFT 24
+#define MVRTC_DAY_MSK 0x7
+
+/*
+ * Hour format bit
+ * 1 = 12 hour clock
+ * 0 = 24 hour clock
+ */
+#define MVRTC_HRFMT_MSK 0x00400000
+
+/* date register */
+#define MVRTC_DATE_SFT 0
+#define MVRTC_DATE_MSK 0x3f
+#define MVRTC_MON_SFT 8
+#define MVRTC_MON_MSK 0x1f
+#define MVRTC_YEAR_SFT 16
+#define MVRTC_YEAR_MSK 0xff
+
+#endif
diff --git a/drivers/spi/atmel_dataflash_spi.c b/drivers/spi/atmel_dataflash_spi.c
index e7d3ff0..363e07a 100644
--- a/drivers/spi/atmel_dataflash_spi.c
+++ b/drivers/spi/atmel_dataflash_spi.c
@@ -19,10 +19,20 @@
*
*/
+/*
+ * This driver desperately needs rework:
+ *
+ * - use structure SoC access
+ * - get rid of including asm/arch/at91_spi.h
+ * - remove asm/arch/at91_spi.h
+ * - get rid of all CONFIG_ATMEL_LEGACY defines and uses
+ *
+ * 02-Aug-2010 Reinhard Meyer <uboot@emk-elektronik.de>
+ */
+
#include <common.h>
-#ifndef CONFIG_AT91_LEGACY
-# define CONFIG_AT91_LEGACY
-# warning Please update to use C structure SoC access !
+#ifndef CONFIG_ATMEL_LEGACY
+# define CONFIG_ATMEL_LEGACY
#endif
#include <spi.h>
#include <malloc.h>
diff --git a/drivers/usb/musb/da8xx.h b/drivers/usb/musb/da8xx.h
index b9660ba..be1cdaf 100644
--- a/drivers/usb/musb/da8xx.h
+++ b/drivers/usb/musb/da8xx.h
@@ -25,7 +25,7 @@
#define __DA8XX_MUSB_H__
#include <asm/arch/hardware.h>
-#include <asm/arch/gpio_defs.h>
+#include <asm/arch/gpio.h>
#include "musb_core.h"
/* Base address of da8xx usb0 wrapper */
diff --git a/include/configs/a320evb.h b/include/configs/a320evb.h
index dfab0f4..62913b5 100644
--- a/include/configs/a320evb.h
+++ b/include/configs/a320evb.h
@@ -24,29 +24,35 @@
#include <asm/arch/a320.h>
-/*-----------------------------------------------------------------------
+/*
+ * Linux kernel tagged list
+ */
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+
+/*
* CPU and Board Configuration Options
*/
#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
#undef CONFIG_SKIP_LOWLEVEL_INIT
-/*-----------------------------------------------------------------------
+/*
* Power Management Unit
*/
#define CONFIG_FTPMU010_POWER
-/*-----------------------------------------------------------------------
+/*
* Timer
*/
#define CONFIG_SYS_HZ 1000 /* timer ticks per second */
-/*-----------------------------------------------------------------------
+/*
* Real Time Clock
*/
#define CONFIG_RTC_FTRTC010
-/*-----------------------------------------------------------------------
+/*
* Serial console configuration
*/
@@ -62,7 +68,7 @@
/* valid baudrates */
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-/*-----------------------------------------------------------------------
+/*
* Ethernet
*/
#define CONFIG_NET_MULTI
@@ -70,7 +76,7 @@
#define CONFIG_BOOTDELAY 3
-/*-----------------------------------------------------------------------
+/*
* Command line configuration.
*/
#include <config_cmd_default.h>
@@ -79,7 +85,7 @@
#define CONFIG_CMD_DATE
#define CONFIG_CMD_PING
-/*-----------------------------------------------------------------------
+/*
* Miscellaneous configurable options
*/
#define CONFIG_SYS_LONGHELP /* undef to save memory */
@@ -96,7 +102,7 @@
/* Boot Argument Buffer Size */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-/*-----------------------------------------------------------------------
+/*
* Stack sizes
*
* The stack sizes are set up in start.S using the settings below
@@ -107,12 +113,12 @@
#define CONFIG_STACKSIZE_FIQ (4 * 1024) /* FIQ stack */
#endif
-/*-----------------------------------------------------------------------
+/*
* Size of malloc() pool
*/
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024)
-/*-----------------------------------------------------------------------
+/*
* SDRAM controller configuration
*/
#define CONFIG_SYS_FTSDMC020_TP0 (FTSDMC020_TP0_TRAS(2) | \
@@ -132,7 +138,7 @@
FTSDMC020_BANK_MBW_32 | \
FTSDMC020_BANK_SIZE_64M)
-/*-----------------------------------------------------------------------
+/*
* Physical Memory Map
*/
#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
@@ -155,7 +161,7 @@
#define CONFIG_SYS_TEXT_BASE 0
-/*-----------------------------------------------------------------------
+/*
* Static memory controller configuration
*/
@@ -194,7 +200,7 @@
{ FTSMC020_BANK1_CONFIG, FTSMC020_BANK1_TIMING, }, \
}
-/*-----------------------------------------------------------------------
+/*
* FLASH and environment organization
*/
diff --git a/include/configs/am3517_crane.h b/include/configs/am3517_crane.h
index 09cb951..743768e 100644
--- a/include/configs/am3517_crane.h
+++ b/include/configs/am3517_crane.h
@@ -28,7 +28,6 @@
/*
* High Level Configuration Options
*/
-#define CONFIG_ARMV7 1 /* This is an ARM V7 CPU core */
#define CONFIG_OMAP 1 /* in a TI OMAP core */
#define CONFIG_OMAP34XX 1 /* which is a 34XX */
#define CONFIG_OMAP3_AM3517CRANE 1 /* working with CRANEBOARD */
diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h
index 18aaadf..6c5728d 100644
--- a/include/configs/am3517_evm.h
+++ b/include/configs/am3517_evm.h
@@ -28,7 +28,6 @@
/*
* High Level Configuration Options
*/
-#define CONFIG_ARMV7 1 /* This is an ARM V7 CPU core */
#define CONFIG_OMAP 1 /* in a TI OMAP core */
#define CONFIG_OMAP34XX 1 /* which is a 34XX */
#define CONFIG_OMAP3_AM3517EVM 1 /* working with AM3517EVM */
diff --git a/include/configs/at91sam9261ek.h b/include/configs/at91sam9261ek.h
index 401478b..126907f 100644
--- a/include/configs/at91sam9261ek.h
+++ b/include/configs/at91sam9261ek.h
@@ -27,52 +27,62 @@
#ifndef __CONFIG_H
#define __CONFIG_H
-#define CONFIG_AT91_LEGACY
-
/* ARM asynchronous clock */
+#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */
#define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 /* 18.432 MHz crystal */
-#define CONFIG_SYS_HZ 1000
+#define CONFIG_SYS_HZ 1000
-#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */
-#ifdef CONFIG_AT91SAM9G10EK
-#define CONFIG_AT91SAM9G10 1 /* It's an Atmel AT91SAM9G10 SoC*/
+#ifdef CONFIG_AT91SAM9G10
+#define CONFIG_AT91SAM9G10EK /* It's an Atmel AT91SAM9G10 EK*/
#else
-#define CONFIG_AT91SAM9261 1 /* It's an Atmel AT91SAM9261 SoC*/
+#define CONFIG_AT91SAM9261EK /* It's an Atmel AT91SAM9261 EK*/
#endif
+
+#include <asm/hardware.h>
+
#define CONFIG_ARCH_CPU_INIT
#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG 1
+#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_DISPLAY_CPUINFO
+
+#define CONFIG_ATMEL_LEGACY
+#define CONFIG_SYS_TEXT_BASE 0x21f00000
+
/*
* Hardware drivers
*/
-#define CONFIG_AT91_GPIO 1
-#define CONFIG_ATMEL_USART 1
-#undef CONFIG_USART0
-#undef CONFIG_USART1
-#undef CONFIG_USART2
-#define CONFIG_USART3 1 /* USART 3 is DBGU */
+
+/* gpio */
+#define CONFIG_AT91_GPIO
+#define CONFIG_AT91_GPIO_PULLUP 1
+
+/* serial console */
+#define CONFIG_ATMEL_USART
+#define CONFIG_USART_BASE ATMEL_BASE_DBGU
+#define CONFIG_USART_ID ATMEL_ID_SYS
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SYS_BAUDRATE_TABLE {115200, 57600, 38400, 19200, 9600}
/* LCD */
-#define CONFIG_LCD 1
+#define CONFIG_LCD
#define LCD_BPP LCD_COLOR8
-#define CONFIG_LCD_LOGO 1
+#define CONFIG_LCD_LOGO
#undef LCD_TEST_PATTERN
-#define CONFIG_LCD_INFO 1
-#define CONFIG_LCD_INFO_BELOW_LOGO 1
-#define CONFIG_SYS_WHITE_ON_BLACK 1
-#define CONFIG_ATMEL_LCD 1
+#define CONFIG_LCD_INFO
+#define CONFIG_LCD_INFO_BELOW_LOGO
+#define CONFIG_SYS_WHITE_ON_BLACK
+#define CONFIG_ATMEL_LCD
#ifdef CONFIG_AT91SAM9261EK
-#define CONFIG_ATMEL_LCD_BGR555 1
-#else
-#define CONFIG_AT91SAM9G10_LCD_BASE 0x23E00000 /* LCD is no more in SRAM */
+#define CONFIG_ATMEL_LCD_BGR555
#endif
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
+
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
/* LED */
#define CONFIG_AT91_LED
@@ -85,10 +95,10 @@
/*
* BOOTP options
*/
-#define CONFIG_BOOTP_BOOTFILESIZE 1
-#define CONFIG_BOOTP_BOOTPATH 1
-#define CONFIG_BOOTP_GATEWAY 1
-#define CONFIG_BOOTP_HOSTNAME 1
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
/*
* Command line configuration.
@@ -101,33 +111,35 @@
#undef CONFIG_CMD_LOADS
#undef CONFIG_CMD_SOURCE
-#define CONFIG_CMD_PING 1
-#define CONFIG_CMD_DHCP 1
-#define CONFIG_CMD_NAND 1
-#define CONFIG_CMD_USB 1
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_USB
/* SDRAM */
#define CONFIG_NR_DRAM_BANKS 1
-#define PHYS_SDRAM 0x20000000
-#define PHYS_SDRAM_SIZE 0x04000000 /* 64 megs */
+#define CONFIG_SYS_SDRAM_BASE 0x20000000
+#define CONFIG_SYS_SDRAM_SIZE 0x04000000
+#define CONFIG_SYS_INIT_SP_ADDR \
+ (ATMEL_BASE_SRAM + 0x1000 - GENERATED_GBL_DATA_SIZE)
/* DataFlash */
#define CONFIG_ATMEL_DATAFLASH_SPI
-#define CONFIG_HAS_DATAFLASH 1
+#define CONFIG_HAS_DATAFLASH
#define CONFIG_SYS_SPI_WRITE_TOUT (5*CONFIG_SYS_HZ)
#define CONFIG_SYS_MAX_DATAFLASH_BANKS 2
#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */
#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3 0xD0000000 /* CS3 */
-#define AT91_SPI_CLK 15000000
-#define DATAFLASH_TCSS (0x1a << 16)
-#define DATAFLASH_TCHS (0x1 << 24)
+#define AT91_SPI_CLK 15000000
+#define DATAFLASH_TCSS (0x1a << 16)
+#define DATAFLASH_TCHS (0x1 << 24)
/* NAND flash */
#ifdef CONFIG_CMD_NAND
#define CONFIG_NAND_ATMEL
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_SYS_NAND_BASE 0x40000000
-#define CONFIG_SYS_NAND_DBW_8 1
+#define CONFIG_SYS_NAND_DBW_8
/* our ALE is AD22 */
#define CONFIG_SYS_NAND_MASK_ALE (1 << 22)
/* our CLE is AD21 */
@@ -138,24 +150,24 @@
#endif
/* NOR flash - no real flash on this board */
-#define CONFIG_SYS_NO_FLASH 1
+#define CONFIG_SYS_NO_FLASH
/* Ethernet */
-#define CONFIG_NET_MULTI 1
-#define CONFIG_DRIVER_DM9000 1
+#define CONFIG_NET_MULTI
+#define CONFIG_DRIVER_DM9000
#define CONFIG_DM9000_BASE 0x30000000
#define DM9000_IO CONFIG_DM9000_BASE
#define DM9000_DATA (CONFIG_DM9000_BASE + 4)
-#define CONFIG_DM9000_USE_16BIT 1
-#define CONFIG_DM9000_NO_SROM 1
+#define CONFIG_DM9000_USE_16BIT
+#define CONFIG_DM9000_NO_SROM
#define CONFIG_NET_RETRY_COUNT 20
-#define CONFIG_RESET_PHY_R 1
+#define CONFIG_RESET_PHY_R
/* USB */
#define CONFIG_USB_ATMEL
-#define CONFIG_USB_OHCI_NEW 1
-#define CONFIG_DOS_PARTITION 1
-#define CONFIG_SYS_USB_OHCI_CPU_INIT 1
+#define CONFIG_USB_OHCI_NEW
+#define CONFIG_DOS_PARTITION
+#define CONFIG_SYS_USB_OHCI_CPU_INIT
#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00500000 /* AT91SAM9261_UHP_BASE */
#ifdef CONFIG_AT91SAM9G10EK
#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9g10"
@@ -163,18 +175,18 @@
#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9261"
#endif
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
-#define CONFIG_USB_STORAGE 1
-#define CONFIG_CMD_FAT 1
+#define CONFIG_USB_STORAGE
+#define CONFIG_CMD_FAT
#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
-#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
+#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
#define CONFIG_SYS_MEMTEST_END 0x23e00000
#ifdef CONFIG_SYS_USE_DATAFLASH_CS0
/* bootstrap + u-boot + env + linux in dataflash on CS0 */
-#define CONFIG_ENV_IS_IN_DATAFLASH 1
+#define CONFIG_ENV_IS_IN_DATAFLASH
#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400)
#define CONFIG_ENV_OFFSET 0x4200
#define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET)
@@ -188,7 +200,7 @@
#elif CONFIG_SYS_USE_DATAFLASH_CS3
/* bootstrap + u-boot + env + linux in dataflash on CS3 */
-#define CONFIG_ENV_IS_IN_DATAFLASH 1
+#define CONFIG_ENV_IS_IN_DATAFLASH
#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3 + 0x8400)
#define CONFIG_ENV_OFFSET 0x4200
#define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3 + CONFIG_ENV_OFFSET)
@@ -202,7 +214,7 @@
#else /* CONFIG_SYS_USE_NANDFLASH */
/* bootstrap + u-boot + env + linux in nandflash */
-#define CONFIG_ENV_IS_IN_NAND 1
+#define CONFIG_ENV_IS_IN_NAND
#define CONFIG_ENV_OFFSET 0x60000
#define CONFIG_ENV_OFFSET_REDUND 0x80000
#define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */
@@ -216,22 +228,19 @@
#endif
-#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 }
-
#define CONFIG_SYS_PROMPT "U-Boot> "
#define CONFIG_SYS_CBSIZE 256
#define CONFIG_SYS_MAXARGS 16
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_LONGHELP 1
-#define CONFIG_CMDLINE_EDITING 1
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_CMDLINE_EDITING
/*
* Size of malloc() pool
*/
#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
-#define CONFIG_STACKSIZE (32*1024) /* regular stack */
+#define CONFIG_STACKSIZE (32*1024) /* regular stack */
#ifdef CONFIG_USE_IRQ
#error CONFIG_USE_IRQ not supported
diff --git a/include/configs/at91sam9263ek.h b/include/configs/at91sam9263ek.h
index f6cb406..d817423 100644
--- a/include/configs/at91sam9263ek.h
+++ b/include/configs/at91sam9263ek.h
@@ -27,13 +27,21 @@
#ifndef __CONFIG_H
#define __CONFIG_H
-/* ARM asynchronous clock */
-#define CONFIG_SYS_AT91_MAIN_CLOCK 16367660 /* 16.367 MHz crystal */
-#define CONFIG_SYS_HZ 1000
+/*
+ * SoC must be defined first, before hardware.h is included.
+ * In this case SoC is defined in boards.cfg.
+ */
+#include <asm/hardware.h>
-#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */
-#define CONFIG_AT91SAM9263 1 /* It's an Atmel AT91SAM9263 SoC*/
-#define CONFIG_AT91SAM9263EK 1 /* on an AT91SAM9263EK Board */
+#define CONFIG_SYS_TEXT_BASE 0x21F00000
+
+/* ARM asynchronous clock */
+#define CONFIG_SYS_AT91_MAIN_CLOCK 16367660 /* 16.367 MHz crystal */
+#define CONFIG_SYS_AT91_SLOW_CLOCK 32768
+#define CONFIG_SYS_HZ 1000
+
+#define CONFIG_AT91SAM9263EK 1 /* It's an AT91SAM9263EK Board */
+
#define CONFIG_ARCH_CPU_INIT
#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
@@ -43,17 +51,27 @@
#ifndef CONFIG_SYS_USE_BOOT_NORFLASH
#define CONFIG_SKIP_LOWLEVEL_INIT
+#else
+#define CONFIG_SYS_USE_NORFLASH
#endif
+#define CONFIG_BOARD_EARLY_INIT_F
+
+#define CONFIG_DISPLAY_CPUINFO
+
/*
* Hardware drivers
*/
-#define CONFIG_AT91_GPIO 1
-#define CONFIG_ATMEL_USART 1
-#undef CONFIG_USART0
-#undef CONFIG_USART1
-#undef CONFIG_USART2
-#define CONFIG_USART3 1 /* USART 3 is DBGU */
+#define CONFIG_ATMEL_LEGACY
+#define CONFIG_AT91_GPIO 1
+#define CONFIG_AT91_GPIO_PULLUP 1
+
+/* serial console */
+#define CONFIG_ATMEL_USART
+#define CONFIG_USART_BASE ATMEL_BASE_DBGU
+#define CONFIG_USART_ID ATMEL_ID_SYS
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SYS_BAUDRATE_TABLE {115200, 19200, 38400, 57600, 9600}
/* LCD */
#define CONFIG_LCD 1
@@ -62,16 +80,16 @@
#undef LCD_TEST_PATTERN
#define CONFIG_LCD_INFO 1
#define CONFIG_LCD_INFO_BELOW_LOGO 1
-#define CONFIG_SYS_WHITE_ON_BLACK 1
+#define CONFIG_SYS_WHITE_ON_BLACK 1
#define CONFIG_ATMEL_LCD 1
#define CONFIG_ATMEL_LCD_BGR555 1
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
/* LED */
#define CONFIG_AT91_LED
-#define CONFIG_RED_LED AT91_PIO_PORTB, 7 /* the power led */
-#define CONFIG_GREEN_LED AT91_PIO_PORTB, 8 /* the user1 led */
-#define CONFIG_YELLOW_LED AT91_PIO_PORTC, 29 /* the user2 led */
+#define CONFIG_RED_LED AT91_PIN_PB7 /* the power led */
+#define CONFIG_GREEN_LED AT91_PIN_PB8 /* the user1 led */
+#define CONFIG_YELLOW_LED AT91_PIN_PC29 /* the user2 led */
#define CONFIG_BOOTDELAY 3
@@ -101,8 +119,11 @@
/* SDRAM */
#define CONFIG_NR_DRAM_BANKS 1
-#define PHYS_SDRAM 0x20000000
-#define PHYS_SDRAM_SIZE 0x04000000 /* 64 megs */
+#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS1
+#define CONFIG_SYS_SDRAM_SIZE 0x04000000
+
+#define CONFIG_SYS_INIT_SP_ADDR \
+ (ATMEL_BASE_SRAM1 + 0x1000 - GENERATED_GBL_DATA_SIZE)
/* DataFlash */
#define CONFIG_ATMEL_DATAFLASH_SPI
@@ -254,19 +275,14 @@
#ifdef CONFIG_CMD_NAND
#define CONFIG_NAND_ATMEL
#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define CONFIG_SYS_NAND_BASE 0x40000000
+#define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3
#define CONFIG_SYS_NAND_DBW_8 1
/* our ALE is AD21 */
#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
/* our CLE is AD22 */
#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
-#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIO_PORTD, 15
-#define CONFIG_SYS_NAND_READY_PIN AT91_PIO_PORTA, 22
-/*
-#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PD15
-#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PA22
-*/
-
+#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PD15
+#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PA22
#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
#endif
@@ -291,7 +307,7 @@
#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
-#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
+#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
#define CONFIG_SYS_MEMTEST_END 0x23e00000
#ifdef CONFIG_SYS_USE_DATAFLASH
@@ -311,7 +327,7 @@
#elif CONFIG_SYS_USE_NANDFLASH
/* bootstrap + u-boot + env + linux in nandflash */
-#define CONFIG_ENV_IS_IN_NAND 1
+#define CONFIG_ENV_IS_IN_NAND 1
#define CONFIG_ENV_OFFSET 0x60000
#define CONFIG_ENV_OFFSET_REDUND 0x80000
#define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */
@@ -323,15 +339,12 @@
#endif
-#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 }
-
#define CONFIG_SYS_PROMPT "U-Boot> "
#define CONFIG_SYS_CBSIZE 256
#define CONFIG_SYS_MAXARGS 16
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_LONGHELP 1
-#define CONFIG_CMDLINE_EDITING 1
+#define CONFIG_CMDLINE_EDITING 1
#define CONFIG_AUTO_COMPLETE
#define CONFIG_SYS_HUSH_PARSER
#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
@@ -339,12 +352,10 @@
/*
* Size of malloc() pool
*/
-#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
+#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
#define CONFIG_STACKSIZE (32*1024) /* regular stack */
-#ifdef CONFIG_USE_IRQ
-#error CONFIG_USE_IRQ not supported
-#endif
+#undef CONFIG_USE_IRQ
#endif
diff --git a/include/configs/at91sam9rlek.h b/include/configs/at91sam9rlek.h
index 8dbd082..3ca09e1 100644
--- a/include/configs/at91sam9rlek.h
+++ b/include/configs/at91sam9rlek.h
@@ -27,33 +27,42 @@
#ifndef __CONFIG_H
#define __CONFIG_H
-#define CONFIG_AT91_LEGACY
+#include <asm/hardware.h>
+
+#define CONFIG_SYS_TEXT_BASE 0x21F00000
/* ARM asynchronous clock */
-#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* 12 MHz crystal */
-#define CONFIG_SYS_HZ 1000
+#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */
+#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* main clock xtal */
+#define CONFIG_SYS_HZ 1000
-#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */
-#define CONFIG_AT91SAM9RL 1 /* It's an Atmel AT91SAM9RL SoC*/
-#define CONFIG_AT91SAM9RLEK 1 /* on an AT91SAM9RLEK Board */
+#define CONFIG_AT91SAM9RLEK 1 /* It's an AT91SAM9RLEK Board */
+
#define CONFIG_ARCH_CPU_INIT
-#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
-
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG 1
-
#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_BOARD_EARLY_INIT_F
+#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
+
+#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS 1
+#define CONFIG_INITRD_TAG 1
+
+#define CONFIG_DISPLAY_CPUINFO
+
+#define CONFIG_ATMEL_LEGACY
+#define CONFIG_AT91_GPIO 1
+#define CONFIG_AT91_GPIO_PULLUP 1
/*
* Hardware drivers
*/
-#define CONFIG_AT91_GPIO 1
-#define CONFIG_ATMEL_USART 1
-#undef CONFIG_USART0
-#undef CONFIG_USART1
-#undef CONFIG_USART2
-#define CONFIG_USART3 1 /* USART 3 is DBGU */
+
+/* serial console */
+#define CONFIG_ATMEL_USART
+#define CONFIG_USART_BASE ATMEL_BASE_DBGU
+#define CONFIG_USART_ID ATMEL_ID_SYS
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SYS_BAUDRATE_TABLE {115200, 19200, 38400, 57600, 9600}
/* LCD */
#define CONFIG_LCD 1
@@ -62,10 +71,13 @@
#undef LCD_TEST_PATTERN
#define CONFIG_LCD_INFO 1
#define CONFIG_LCD_INFO_BELOW_LOGO 1
-#define CONFIG_SYS_WHITE_ON_BLACK 1
+#define CONFIG_SYS_WHITE_ON_BLACK 1
#define CONFIG_ATMEL_LCD 1
#define CONFIG_ATMEL_LCD_RGB565 1
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
+/* Let board_init_f handle the framebuffer allocation */
+#undef CONFIG_FB_ADDR
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
+
/* LED */
#define CONFIG_AT91_LED
@@ -85,25 +97,29 @@
#undef CONFIG_CMD_IMLS
#undef CONFIG_CMD_LOADS
#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_NFS
#undef CONFIG_CMD_SOURCE
#undef CONFIG_CMD_USB
-#define CONFIG_CMD_NAND 1
+#define CONFIG_CMD_NAND 1
/* SDRAM */
#define CONFIG_NR_DRAM_BANKS 1
-#define PHYS_SDRAM 0x20000000
-#define PHYS_SDRAM_SIZE 0x04000000 /* 64 megs */
+#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS1
+#define CONFIG_SYS_SDRAM_SIZE 0x04000000
+
+#define CONFIG_SYS_INIT_SP_ADDR \
+ (ATMEL_BASE_SRAM + 0x1000 - GENERATED_GBL_DATA_SIZE)
/* DataFlash */
#define CONFIG_ATMEL_DATAFLASH_SPI
-#define CONFIG_HAS_DATAFLASH 1
+#define CONFIG_HAS_DATAFLASH 1
#define CONFIG_SYS_SPI_WRITE_TOUT (5*CONFIG_SYS_HZ)
#define CONFIG_SYS_MAX_DATAFLASH_BANKS 1
#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */
-#define AT91_SPI_CLK 15000000
-#define DATAFLASH_TCSS (0x1a << 16)
-#define DATAFLASH_TCHS (0x1 << 24)
+#define AT91_SPI_CLK 15000000
+#define DATAFLASH_TCSS (0x1a << 16)
+#define DATAFLASH_TCHS (0x1 << 24)
/* NOR flash - not present */
#define CONFIG_SYS_NO_FLASH 1
@@ -112,7 +128,7 @@
#ifdef CONFIG_CMD_NAND
#define CONFIG_NAND_ATMEL
#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define CONFIG_SYS_NAND_BASE 0x40000000
+#define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3
#define CONFIG_SYS_NAND_DBW_8 1
/* our ALE is AD21 */
#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
@@ -129,7 +145,7 @@
#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
-#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
+#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
#define CONFIG_SYS_MEMTEST_END 0x23e00000
#ifdef CONFIG_SYS_USE_DATAFLASH
@@ -149,7 +165,7 @@
#else /* CONFIG_SYS_USE_NANDFLASH */
/* bootstrap + u-boot + env + linux in nandflash */
-#define CONFIG_ENV_IS_IN_NAND 1
+#define CONFIG_ENV_IS_IN_NAND 1
#define CONFIG_ENV_OFFSET 0x60000
#define CONFIG_ENV_OFFSET_REDUND 0x80000
#define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */
@@ -161,25 +177,20 @@
#endif
-#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 }
-
#define CONFIG_SYS_PROMPT "U-Boot> "
#define CONFIG_SYS_CBSIZE 256
#define CONFIG_SYS_MAXARGS 16
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_LONGHELP 1
-#define CONFIG_CMDLINE_EDITING 1
+#define CONFIG_CMDLINE_EDITING 1
/*
* Size of malloc() pool
*/
-#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
+#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
#define CONFIG_STACKSIZE (32*1024) /* regular stack */
-#ifdef CONFIG_USE_IRQ
-#error CONFIG_USE_IRQ not supported
-#endif
+#undef CONFIG_USE_IRQ
#endif
diff --git a/include/configs/ca9x4_ct_vxp.h b/include/configs/ca9x4_ct_vxp.h
index f0ac79a..8c57eab 100644
--- a/include/configs/ca9x4_ct_vxp.h
+++ b/include/configs/ca9x4_ct_vxp.h
@@ -32,9 +32,6 @@
#define CONFIG_REVISION_TAG 1
#define CONFIG_SYS_TEXT_BASE 0x60800000
-/* High Level Configuration Options */
-#define CONFIG_ARMV7 1
-
#define CONFIG_SYS_MEMTEST_START 0x60000000
#define CONFIG_SYS_MEMTEST_END 0x20000000
#define CONFIG_SYS_HZ 1000
diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h
index 93a1b26..16a5f5b 100644
--- a/include/configs/cm_t35.h
+++ b/include/configs/cm_t35.h
@@ -36,7 +36,6 @@
/*
* High Level Configuration Options
*/
-#define CONFIG_ARMV7 1 /* This is an ARM V7 CPU core */
#define CONFIG_OMAP 1 /* in a TI OMAP core */
#define CONFIG_OMAP34XX 1 /* which is a 34XX */
#define CONFIG_OMAP3430 1 /* which is in a 3430 */
diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h
index 125c690..cf77606 100644
--- a/include/configs/devkit8000.h
+++ b/include/configs/devkit8000.h
@@ -32,7 +32,6 @@
#define __CONFIG_H
/* High Level Configuration Options */
-#define CONFIG_ARMV7 1 /* This is an ARM V7 CPU core */
#define CONFIG_OMAP 1 /* in a TI OMAP core */
#define CONFIG_OMAP34XX 1 /* which is a 34XX */
#define CONFIG_OMAP3430 1 /* which is in a 3430 */
diff --git a/include/configs/dig297.h b/include/configs/dig297.h
index 7aeb24e..b68f073 100644
--- a/include/configs/dig297.h
+++ b/include/configs/dig297.h
@@ -35,7 +35,6 @@
/*
* High Level Configuration Options
*/
-#define CONFIG_ARMV7 /* This is an ARM V7 CPU core */
#define CONFIG_OMAP /* in a TI OMAP core */
#define CONFIG_OMAP34XX /* which is a 34XX */
#define CONFIG_OMAP3430 /* which is in a 3430 */
diff --git a/include/configs/gplugd.h b/include/configs/gplugd.h
new file mode 100644
index 0000000..cc14f49
--- /dev/null
+++ b/include/configs/gplugd.h
@@ -0,0 +1,87 @@
+/*
+ * (C) Copyright 2011
+ * eInfochips Ltd. <www.einfochips.com>
+ * Written-by: Ajay Bhargav <ajay.bhargav@einfochips.com>
+ *
+ * Based on Aspenite:
+ * (C) Copyright 2010
+ * Marvell Semiconductor <www.marvell.com>
+ * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
+ * Contributor: Mahavir Jain <mjain@marvell.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#ifndef __CONFIG_GPLUGD_H
+#define __CONFIG_GPLUGD_H
+
+/*
+ * Version number information
+ */
+#define CONFIG_IDENT_STRING "\nMarvell-gplugD"
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_SHEEVA_88SV331xV5 1 /* CPU Core subversion */
+#define CONFIG_ARMADA100 1 /* SOC Family Name */
+#define CONFIG_ARMADA168 1 /* SOC Used on this Board */
+#define CONFIG_MACH_SHEEVAD /* Machine type */
+#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
+
+#define CONFIG_SYS_TEXT_BASE 0x00f00000
+
+/*
+ * There is no internal RAM in ARMADA100, using DRAM
+ * TBD: dcache to be used for this
+ */
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE - 0x00200000)
+#define CONFIG_NR_DRAM_BANKS_MAX 2
+
+/*
+ * Commands configuration
+ */
+#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
+#include <config_cmd_default.h>
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_AUTOSCRIPT
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_NFS
+
+/*
+ * mv-common.h should be defined after CMD configs since it used them
+ * to enable certain macros
+ */
+#include "mv-common.h"
+#undef CONFIG_ARCH_MISC_INIT
+
+#ifdef CONFIG_SYS_NS16550_COM1
+#undef CONFIG_SYS_NS16550_COM1
+#endif /* CONFIG_SYS_NS16550_COM1 */
+
+#define CONFIG_SYS_NS16550_COM1 ARMD1_UART3_BASE
+
+/*
+ * Environment variables configurations
+ */
+#define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */
+#define CONFIG_ENV_SIZE 0x20000 /* 64k */
+
+#endif /* __CONFIG_GPLUGD_H */
diff --git a/include/configs/grasshopper.h b/include/configs/grasshopper.h
new file mode 100644
index 0000000..9779449
--- /dev/null
+++ b/include/configs/grasshopper.h
@@ -0,0 +1,198 @@
+/*
+ * Copyright (C) 2011
+ * Corscience GmbH & Co.KG, Andreas Bießmann <biessmann@corscience.de>
+ *
+ * Configuration settings for the grasshopper (ICnova AP7000) board
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef __GRASSHOPPER_CONFIG_H
+#define __GRASSHOPPER_CONFIG_H
+
+#include <asm/arch/hardware.h>
+
+#define CONFIG_AVR32
+#define CONFIG_AT32AP
+#define CONFIG_AT32AP7000
+
+/*
+ * Timer clock frequency. We're using the CPU-internal COUNT register
+ * for this, so this is equivalent to the CPU core clock frequency
+ */
+#define CONFIG_SYS_HZ 1000
+
+/*
+ * Set up the PLL to run at 140 MHz, the CPU to run at the PLL
+ * frequency, the HSB and PBB at 1/2, and the PBA to run at 1/4 the
+ * PLL frequency.
+ * (CONFIG_SYS_OSC0_HZ * CONFIG_SYS_PLL0_MUL) / CONFIG_SYS_PLL0_DIV = PLL MHz
+ */
+#define CONFIG_PLL
+#define CONFIG_SYS_POWER_MANAGER
+#define CONFIG_SYS_OSC0_HZ 20000000
+#define CONFIG_SYS_PLL0_DIV 1
+#define CONFIG_SYS_PLL0_MUL 7
+#define CONFIG_SYS_PLL0_SUPPRESS_CYCLES 16
+/*
+ * Set the CPU running at:
+ * PLL / (2^CONFIG_SYS_CLKDIV_CPU) = CPU MHz
+ */
+#define CONFIG_SYS_CLKDIV_CPU 0
+/*
+ * Set the HSB running at:
+ * PLL / (2^CONFIG_SYS_CLKDIV_HSB) = HSB MHz
+ */
+#define CONFIG_SYS_CLKDIV_HSB 1
+/*
+ * Set the PBA running at:
+ * PLL / (2^CONFIG_SYS_CLKDIV_PBA) = PBA MHz
+ */
+#define CONFIG_SYS_CLKDIV_PBA 2
+/*
+ * Set the PBB running at:
+ * PLL / (2^CONFIG_SYS_CLKDIV_PBB) = PBB MHz
+ */
+#define CONFIG_SYS_CLKDIV_PBB 1
+
+/* Reserve VM regions for SDRAM and NOR flash */
+#define CONFIG_SYS_NR_VM_REGIONS 2
+
+/*
+ * The PLLOPT register controls the PLL like this:
+ * icp = PLLOPT<2>
+ * ivco = PLLOPT<1:0>
+ *
+ * We want icp=1 (default) and ivco=0 (80-160 MHz) or ivco=2 (150-240MHz).
+ */
+#define CONFIG_SYS_PLL0_OPT 0x04
+
+#define CONFIG_USART_BASE ATMEL_BASE_USART1
+#define CONFIG_USART_ID 1
+
+/* User serviceable stuff */
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+
+#define CONFIG_STACKSIZE (2048)
+
+#define CONFIG_BAUDRATE 115200
+
+/*
+ * Only interrupt autoboot if <space> is pressed. Otherwise, garbage
+ * data on the serial line may interrupt the boot sequence.
+ */
+#define CONFIG_BOOTDELAY 1
+#define CONFIG_AUTOBOOT
+#define CONFIG_AUTOBOOT_KEYED
+#define CONFIG_AUTOBOOT_PROMPT "Press SPACE to abort autoboot in %d" \
+ " seconds\n", bootdelay
+#define CONFIG_AUTOBOOT_DELAY_STR "d"
+#define CONFIG_AUTOBOOT_STOP_STR " "
+
+/*
+ * After booting the board for the first time, new ethernet addresses
+ * should be generated and assigned to the environment variables
+ * "ethaddr". This is normally done during production.
+ */
+#define CONFIG_OVERWRITE_ETHADDR_ONCE
+#define CONFIG_NET_MULTI
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+/* remove unneeded commands */
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_SETGETDCR
+
+/* add useful commands */
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "~> "
+#define CONFIG_CMDLINE_EDITING
+
+#define CONFIG_ATMEL_USART
+#define CONFIG_MACB
+#define CONFIG_PORTMUX_PIO
+#define CONFIG_SYS_NR_PIOS 5
+#define CONFIG_SYS_HSDRAMC
+
+#define CONFIG_SYS_DCACHE_LINESZ 32
+#define CONFIG_SYS_ICACHE_LINESZ 32
+
+#define CONFIG_NR_DRAM_BANKS 1
+
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_FLASH_CFI_DRIVER
+
+#define CONFIG_SYS_FLASH_BASE 0x00000000
+#define CONFIG_SYS_FLASH_SIZE 0x800000
+#define CONFIG_SYS_MAX_FLASH_BANKS 1
+#define CONFIG_SYS_MAX_FLASH_SECT 135
+
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_TEXT_BASE 0x00000000
+
+#define CONFIG_SYS_INTRAM_BASE INTERNAL_SRAM_BASE
+#define CONFIG_SYS_INTRAM_SIZE INTERNAL_SRAM_SIZE
+#define CONFIG_SYS_SDRAM_BASE EBI_SDRAM_BASE
+
+#define CONFIG_ENV_IS_IN_FLASH
+/* place u-boot env in flash sector after u-boot */
+#define CONFIG_ENV_SIZE 0x10000
+#define CONFIG_ENV_ADDR 0x20000
+
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INTRAM_BASE + \
+ CONFIG_SYS_INTRAM_SIZE)
+
+#define CONFIG_SYS_MALLOC_LEN (256*1024)
+#define CONFIG_SYS_DMA_ALLOC_LEN (16384)
+
+/* Allow 4MB for the kernel run-time image */
+#define CONFIG_SYS_LOAD_ADDR (EBI_SDRAM_BASE + 0x00400000)
+#define CONFIG_SYS_BOOTPARAMS_LEN (16 * 1024)
+
+/* Other configuration settings that shouldn't have to change all that often */
+#define CONFIG_SYS_PROMPT "U-Boot> "
+#define CONFIG_SYS_CBSIZE 256
+#define CONFIG_SYS_MAXARGS 16
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
+ sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_LONGHELP
+
+#define CONFIG_SYS_MEMTEST_START EBI_SDRAM_BASE
+#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x700000)
+#define CONFIG_SYS_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 }
+
+#endif /* __GRASSHOPPER_CONFIG_H */
+/* vim: set ts=8 noet: */
diff --git a/include/configs/igep0020.h b/include/configs/igep0020.h
index 5af9bec..b6534e4 100644
--- a/include/configs/igep0020.h
+++ b/include/configs/igep0020.h
@@ -25,7 +25,6 @@
/*
* High Level Configuration Options
*/
-#define CONFIG_ARMV7 1 /* This is an ARM V7 CPU core */
#define CONFIG_OMAP 1 /* in a TI OMAP core */
#define CONFIG_OMAP34XX 1 /* which is a 34XX */
#define CONFIG_OMAP3430 1 /* which is in a 3430 */
diff --git a/include/configs/igep0030.h b/include/configs/igep0030.h
index 92144af..d85e5ae 100644
--- a/include/configs/igep0030.h
+++ b/include/configs/igep0030.h
@@ -25,7 +25,6 @@
/*
* High Level Configuration Options
*/
-#define CONFIG_ARMV7 1 /* This is an ARM V7 CPU core */
#define CONFIG_OMAP 1 /* in a TI OMAP core */
#define CONFIG_OMAP34XX 1 /* which is a 34XX */
#define CONFIG_OMAP3430 1 /* which is in a 3430 */
diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
index 9fd80ed..d7cbc2f 100644
--- a/include/configs/omap3_beagle.h
+++ b/include/configs/omap3_beagle.h
@@ -31,7 +31,6 @@
/*
* High Level Configuration Options
*/
-#define CONFIG_ARMV7 1 /* This is an ARM V7 CPU core */
#define CONFIG_OMAP 1 /* in a TI OMAP core */
#define CONFIG_OMAP34XX 1 /* which is a 34XX */
#define CONFIG_OMAP3430 1 /* which is in a 3430 */
diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h
index 13a4fbf..afa18aa 100644
--- a/include/configs/omap3_evm.h
+++ b/include/configs/omap3_evm.h
@@ -36,7 +36,6 @@
/*
* High Level Configuration Options
*/
-#define CONFIG_ARMV7 1 /* This is an ARM V7 CPU core */
#define CONFIG_OMAP 1 /* in a TI OMAP core */
#define CONFIG_OMAP34XX 1 /* which is a 34XX */
#define CONFIG_OMAP3430 1 /* which is in a 3430 */
diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h
index 242b317..d6e0a06 100644
--- a/include/configs/omap3_overo.h
+++ b/include/configs/omap3_overo.h
@@ -23,7 +23,6 @@
/*
* High Level Configuration Options
*/
-#define CONFIG_ARMV7 1 /* This is an ARM V7 CPU core */
#define CONFIG_OMAP 1 /* in a TI OMAP core */
#define CONFIG_OMAP34XX 1 /* which is a 34XX */
#define CONFIG_OMAP3430 1 /* which is in a 3430 */
diff --git a/include/configs/omap3_pandora.h b/include/configs/omap3_pandora.h
index 39c87a8..bd55abc 100644
--- a/include/configs/omap3_pandora.h
+++ b/include/configs/omap3_pandora.h
@@ -26,7 +26,6 @@
/*
* High Level Configuration Options
*/
-#define CONFIG_ARMV7 1 /* This is an ARM V7 CPU core */
#define CONFIG_OMAP 1 /* in a TI OMAP core */
#define CONFIG_OMAP34XX 1 /* which is a 34XX */
#define CONFIG_OMAP3430 1 /* which is in a 3430 */
diff --git a/include/configs/omap3_sdp3430.h b/include/configs/omap3_sdp3430.h
index 55bbcd4..e1d8c78 100644
--- a/include/configs/omap3_sdp3430.h
+++ b/include/configs/omap3_sdp3430.h
@@ -36,7 +36,6 @@
/*
* High Level Configuration Options
*/
-#define CONFIG_ARMV7 1 /* This is an ARM V7 CPU core */
#define CONFIG_OMAP 1 /* in a TI OMAP core */
#define CONFIG_OMAP34XX 1 /* which is a 34XX */
#define CONFIG_OMAP3430 1 /* which is in a 3430 */
diff --git a/include/configs/omap3_zoom1.h b/include/configs/omap3_zoom1.h
index 9183849..aeac7c7 100644
--- a/include/configs/omap3_zoom1.h
+++ b/include/configs/omap3_zoom1.h
@@ -32,7 +32,6 @@
/*
* High Level Configuration Options
*/
-#define CONFIG_ARMV7 1 /* This is an ARM V7 CPU core */
#define CONFIG_OMAP 1 /* in a TI OMAP core */
#define CONFIG_OMAP34XX 1 /* which is a 34XX */
#define CONFIG_OMAP3430 1 /* which is in a 3430 */
diff --git a/include/configs/omap3_zoom2.h b/include/configs/omap3_zoom2.h
index 3573edf..2a56182 100644
--- a/include/configs/omap3_zoom2.h
+++ b/include/configs/omap3_zoom2.h
@@ -33,7 +33,6 @@
/*
* High Level Configuration Options
*/
-#define CONFIG_ARMV7 1 /* This is an ARM V7 CPU core */
#define CONFIG_OMAP 1 /* in a TI OMAP core */
#define CONFIG_OMAP34XX 1 /* which is a 34XX */
#define CONFIG_OMAP3430 1 /* which is in a 3430 */
diff --git a/include/configs/omap4_panda.h b/include/configs/omap4_panda.h
index 1daffb7..e313231 100644
--- a/include/configs/omap4_panda.h
+++ b/include/configs/omap4_panda.h
@@ -30,7 +30,6 @@
/*
* High Level Configuration Options
*/
-#define CONFIG_ARMV7 1 /* This is an ARM V7 CPU core */
#define CONFIG_OMAP 1 /* in a TI OMAP core */
#define CONFIG_OMAP44XX 1 /* which is a 44XX */
#define CONFIG_OMAP4430 1 /* which is in a 4430 */
@@ -237,4 +236,41 @@
#define CONFIG_SYS_PL310_BASE 0x48242000
#endif
+/* Defines for SDRAM init */
+#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
+#define CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION
+#define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS
+#endif
+
+/* Defines for SPL */
+#define CONFIG_SPL
+#define CONFIG_SPL_TEXT_BASE 0x40304350
+#define CONFIG_SPL_MAX_SIZE 0x8000 /* 32 K */
+#define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK
+
+#define CONFIG_SPL_BSS_START_ADDR 0x80000000
+#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */
+
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
+#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */
+#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1
+#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img"
+
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_LIBDISK_SUPPORT
+#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_SPL_MMC_SUPPORT
+#define CONFIG_SPL_FAT_SUPPORT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv7/omap-common/u-boot-spl.lds"
+
+/*
+ * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
+ * 64 bytes before this address should be set aside for u-boot.img's
+ * header. That is 0x800FFFC0--0x80100000 should not be used for any
+ * other needs.
+ */
+#define CONFIG_SYS_TEXT_BASE 0x80100000
+
#endif /* __CONFIG_H */
diff --git a/include/configs/omap4_sdp4430.h b/include/configs/omap4_sdp4430.h
index 68ffa87..5b3110c 100644
--- a/include/configs/omap4_sdp4430.h
+++ b/include/configs/omap4_sdp4430.h
@@ -31,7 +31,6 @@
/*
* High Level Configuration Options
*/
-#define CONFIG_ARMV7 1 /* This is an ARM V7 CPU core */
#define CONFIG_OMAP 1 /* in a TI OMAP core */
#define CONFIG_OMAP44XX 1 /* which is a 44XX */
#define CONFIG_OMAP4430 1 /* which is in a 4430 */
@@ -243,4 +242,41 @@
#define CONFIG_SYS_PL310_BASE 0x48242000
#endif
+/* Defines for SDRAM init */
+#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
+#define CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION
+#define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS
+#endif
+
+/* Defines for SPL */
+#define CONFIG_SPL
+#define CONFIG_SPL_TEXT_BASE 0x40304350
+#define CONFIG_SPL_MAX_SIZE 0x8000 /* 32 K */
+#define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK
+
+#define CONFIG_SPL_BSS_START_ADDR 0x80000000
+#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */
+
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
+#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */
+#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1
+#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img"
+
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_LIBDISK_SUPPORT
+#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_SPL_MMC_SUPPORT
+#define CONFIG_SPL_FAT_SUPPORT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv7/omap-common/u-boot-spl.lds"
+
+/*
+ * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
+ * 64 bytes before this address should be set aside for u-boot.img's
+ * header. That is 0x800FFFC0--0x80100000 should not be used for any
+ * other needs.
+ */
+#define CONFIG_SYS_TEXT_BASE 0x80100000
+
#endif /* __CONFIG_H */
diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h
index d648ce8..a5aa859 100644
--- a/include/configs/s5p_goni.h
+++ b/include/configs/s5p_goni.h
@@ -28,7 +28,6 @@
#define __CONFIG_H
/* High Level Configuration Options */
-#define CONFIG_ARMV7 1 /* This is an ARM V7 CPU core */
#define CONFIG_SAMSUNG 1 /* in a SAMSUNG core */
#define CONFIG_S5P 1 /* which is in a S5P Family */
#define CONFIG_S5PC110 1 /* which is in a S5PC110 */
diff --git a/include/configs/s5pc210_universal.h b/include/configs/s5pc210_universal.h
index bbe104b..4031016 100644
--- a/include/configs/s5pc210_universal.h
+++ b/include/configs/s5pc210_universal.h
@@ -30,7 +30,6 @@
* High Level Configuration Options
* (easy to change)
*/
-#define CONFIG_ARMV7 1 /* This is an ARM V7 CPU core */
#define CONFIG_SAMSUNG 1 /* in a SAMSUNG core */
#define CONFIG_S5P 1 /* which is in a S5P Family */
#define CONFIG_S5PC210 1 /* which is in a S5PC210 */
diff --git a/include/configs/smdkc100.h b/include/configs/smdkc100.h
index 70e23b5..19dde1b 100644
--- a/include/configs/smdkc100.h
+++ b/include/configs/smdkc100.h
@@ -32,7 +32,6 @@
* High Level Configuration Options
* (easy to change)
*/
-#define CONFIG_ARMV7 1 /* This is an ARM V7 CPU core */
#define CONFIG_SAMSUNG 1 /* in a SAMSUNG core */
#define CONFIG_S5P 1 /* which is in a S5P Family */
#define CONFIG_S5PC100 1 /* which is in a S5PC100 */
diff --git a/include/configs/smdkv310.h b/include/configs/smdkv310.h
index a7f5850..2f97bea 100644
--- a/include/configs/smdkv310.h
+++ b/include/configs/smdkv310.h
@@ -26,7 +26,6 @@
#define __CONFIG_H
/* High Level Configuration Options */
-#define CONFIG_ARMV7 1 /*This is an ARM V7 CPU core */
#define CONFIG_SAMSUNG 1 /* in a SAMSUNG core */
#define CONFIG_S5P 1 /* S5P Family */
#define CONFIG_S5PC210 1 /* which is in a S5PC210 SoC */
@@ -166,4 +165,7 @@
#define CONFIG_SMC911X_16_BIT
#define CONFIG_ENV_SROM_BANK 1
#endif /*CONFIG_CMD_NET*/
+
+/* Enable devicetree support */
+#define CONFIG_OF_LIBFDT
#endif /* __CONFIG_H */
diff --git a/include/configs/spear-common.h b/include/configs/spear-common.h
index 4e5bdea..55d19b5 100644
--- a/include/configs/spear-common.h
+++ b/include/configs/spear-common.h
@@ -86,6 +86,8 @@
#define CONFIG_SYS_LOADS_BAUD_CHANGE
/* NAND FLASH Configuration */
+#define CONFIG_MTD_DEVICE
+#define CONFIG_MTD_PARTITIONS
#define CONFIG_NAND_SPEAR 1
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_MTD_NAND_VERIFY_WRITE 1
@@ -209,4 +211,14 @@
#define PHYS_SDRAM_1 0x00000000
#define PHYS_SDRAM_1_MAXSIZE 0x40000000
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_RAM_ADDR 0xD2800000
+#define CONFIG_SYS_INIT_RAM_SIZE 0x2000
+
+#define CONFIG_SYS_INIT_SP_OFFSET \
+ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+
+#define CONFIG_SYS_INIT_SP_ADDR \
+ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+
#endif
diff --git a/include/configs/versatile.h b/include/configs/versatile.h
index db68965..32cee82 100644
--- a/include/configs/versatile.h
+++ b/include/configs/versatile.h
@@ -74,6 +74,7 @@
/*
* Size of malloc() pool
*/
+#define CONFIG_ENV_SIZE 8192
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024)
/*
@@ -168,9 +169,26 @@
#define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB */
#define PHYS_FLASH_SIZE 0x04000000 /* 64MB */
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_RAM_ADDR 0x00800000
+#define CONFIG_SYS_INIT_RAM_SIZE 0x000FFFFF
+#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
+ GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_GBL_DATA_OFFSET)
+
+#define CONFIG_BOARD_EARLY_INIT_F
+
/*-----------------------------------------------------------------------
* FLASH and environment organization
*/
+#ifdef CONFIG_ARCH_VERSATILE_QEMU
+#define CONFIG_SYS_TEXT_BASE 0x10000
+#define CONFIG_SYS_NO_FLASH
+#define CONFIG_ENV_IS_NOWHERE
+#define CONFIG_SYS_MONITOR_LEN 0x80000
+#else
+#define CONFIG_SYS_TEXT_BASE 0x01000000
/*
* Use the CFI flash driver for ease of use
*/
@@ -222,7 +240,6 @@
/* The ARM Boot Monitor is shipped in the lowest sector of flash */
#define FLASH_TOP (CONFIG_SYS_FLASH_BASE + PHYS_FLASH_SIZE)
-#define CONFIG_ENV_SIZE 8192
#define CONFIG_ENV_ADDR (FLASH_TOP - CONFIG_ENV_SECT_SIZE)
#define CONFIG_ENV_OFFSET (CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE)
#define CONFIG_SYS_MONITOR_BASE (CONFIG_ENV_ADDR - CONFIG_SYS_MONITOR_LEN)
@@ -230,4 +247,6 @@
#define CONFIG_SYS_FLASH_PROTECTION /* The devices have real protection */
#define CONFIG_SYS_FLASH_EMPTY_INFO /* flinfo indicates empty blocks */
+#endif
+
#endif /* __CONFIG_H */
diff --git a/include/image.h b/include/image.h
index 3c528a4..352e4a0 100644
--- a/include/image.h
+++ b/include/image.h
@@ -158,6 +158,7 @@
#define IH_TYPE_KWBIMAGE 9 /* Kirkwood Boot Image */
#define IH_TYPE_IMXIMAGE 10 /* Freescale IMXBoot Image */
#define IH_TYPE_UBLIMAGE 11 /* Davinci UBL Image */
+#define IH_TYPE_OMAPIMAGE 12 /* TI OMAP Config Header Image */
/*
* Compression Types
diff --git a/mmc_spl/board/samsung/smdkv310/Makefile b/mmc_spl/board/samsung/smdkv310/Makefile
index de2c1a2..fdfd015 100644
--- a/mmc_spl/board/samsung/smdkv310/Makefile
+++ b/mmc_spl/board/samsung/smdkv310/Makefile
@@ -40,7 +40,7 @@
SOBJS = start.o mem_setup.o lowlevel_init.o
COBJS = mmc_boot.o
-SRCS := $(addprefix $(obj),$(SOBJS:.o=.S) $(COBJS:.o=.c))
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
__OBJS := $(SOBJS) $(COBJS)
LNDIR := $(OBJTREE)/mmc_spl/board/$(BOARDDIR)
@@ -76,25 +76,25 @@
# create symbolic links for common files
# from cpu directory
-$(obj)start.S:
+start.S:
@rm -f $@
@ln -s $(TOPDIR)/arch/arm/cpu/armv7/start.S $@
# from board directory
-$(obj)mem_setup.S:
+mem_setup.S:
@rm -f $@
@ln -s $(TOPDIR)/board/samsung/smdkv310/mem_setup.S $@
-$(obj)lowlevel_init.S:
+lowlevel_init.S:
@rm -f $@
@ln -s $(TOPDIR)/board/samsung/smdkv310/lowlevel_init.S $@
#########################################################################
-$(obj)%.o: $(obj)%.S
+$(obj)%.o: %.S
$(CC) $(AFLAGS) -c -o $@ $<
-$(obj)%.o: $(obj)%.c
+$(obj)%.o: %.c
$(CC) $(CFLAGS) -c -o $@ $<
# defines $(obj).depend target
diff --git a/net/eth.c b/net/eth.c
index 6523834..3aad71f 100644
--- a/net/eth.c
+++ b/net/eth.c
@@ -521,7 +521,6 @@
#warning Ethernet driver is deprecated. Please update to use CONFIG_NET_MULTI
-extern int at91rm9200_miiphy_initialize(bd_t *bis);
extern int mcf52x2_miiphy_initialize(bd_t *bis);
extern int ns7520_miiphy_initialize(bd_t *bis);
@@ -532,9 +531,6 @@
miiphy_init();
#endif
-#if defined(CONFIG_AT91RM9200)
- at91rm9200_miiphy_initialize(bis);
-#endif
#if defined(CONFIG_MCF52x2)
mcf52x2_miiphy_initialize(bis);
#endif
diff --git a/spl/Makefile b/spl/Makefile
index 0204f97..87f13f6 100644
--- a/spl/Makefile
+++ b/spl/Makefile
@@ -85,6 +85,12 @@
$(shell $(LD) --version | \
sed -ne 's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p')
+ifdef CONFIG_OMAP
+$(OBJTREE)/MLO: $(obj)u-boot-spl.bin
+ $(OBJTREE)/tools/mkimage -T omapimage \
+ -a $(CONFIG_SPL_TEXT_BASE) -d $< $@
+endif
+
ALL-y += $(obj)u-boot-spl.bin
all: $(ALL-y)
diff --git a/tools/Makefile b/tools/Makefile
index e813e1d..fc741d3 100644
--- a/tools/Makefile
+++ b/tools/Makefile
@@ -88,6 +88,7 @@
OBJ_FILES-$(CONFIG_XWAY_SWAP_BYTES) += xway-swap-bytes.o
NOPED_OBJ_FILES-y += kwbimage.o
NOPED_OBJ_FILES-y += imximage.o
+NOPED_OBJ_FILES-y += omapimage.o
NOPED_OBJ_FILES-y += mkimage.o
OBJ_FILES-$(CONFIG_NETCONSOLE) += ncb.o
NOPED_OBJ_FILES-y += os_support.o
@@ -192,6 +193,7 @@
$(obj)md5.o \
$(obj)mkimage.o \
$(obj)os_support.o \
+ $(obj)omapimage.o \
$(obj)sha1.o \
$(obj)ublimage.o \
$(LIBFDT_OBJS)
diff --git a/tools/mkimage.c b/tools/mkimage.c
index 7215d0f..2f33101 100644
--- a/tools/mkimage.c
+++ b/tools/mkimage.c
@@ -156,6 +156,8 @@
init_imx_image_type ();
/* Init FIT image generation/list support */
init_fit_image_type ();
+ /* Init TI OMAP Boot image generation/list support */
+ init_omap_image_type();
/* Init Default image generation/list support */
init_default_image_type ();
/* Init Davinci UBL support */
diff --git a/tools/mkimage.h b/tools/mkimage.h
index d109d40..e59a919 100644
--- a/tools/mkimage.h
+++ b/tools/mkimage.h
@@ -144,5 +144,6 @@
void init_default_image_type (void);
void init_fit_image_type (void);
void init_ubl_image_type(void);
+void init_omap_image_type(void);
#endif /* _MKIIMAGE_H_ */
diff --git a/tools/omap/clocks_get_m_n.c b/tools/omap/clocks_get_m_n.c
new file mode 100644
index 0000000..cfc1760
--- /dev/null
+++ b/tools/omap/clocks_get_m_n.c
@@ -0,0 +1,197 @@
+/*
+ * Program for finding M & N values for DPLLs
+ * To be run on Host PC
+ *
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ *
+ * Aneesh V <aneesh@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <stdlib.h>
+#include <stdio.h>
+typedef unsigned int u32;
+#define MAX_N 127
+
+/*
+ * get_m_n_optimized() - Finds optimal DPLL multiplier(M) and divider(N)
+ * values based on the reference frequency, required output frequency,
+ * maximum tolerance for output frequency etc.
+ *
+ * target_freq_khz - output frequency required in KHz
+ * ref_freq_khz - reference(input) frequency in KHz
+ * m - pointer to computed M value
+ * n - pointer to computed N value
+ * tolerance_khz - tolerance for the output frequency. When the algorithm
+ * succeeds in finding vialble M and N values the corresponding output
+ * frequency will be in the range:
+ * [target_freq_khz - tolerance_khz, target_freq_khz]
+ *
+ * Formula:
+ * Fdpll = (2 * M * Fref) / (N + 1)
+ *
+ * Considerations for lock-time:
+ * - Smaller the N, better lock-time, especially lock-time will be
+ * - For acceptable lock-times:
+ * Fref / (M + 1) >= 1 MHz
+ *
+ * Considerations for power:
+ * - The difference in power for different N values giving the same
+ * output is negligible. So, we optimize for lock-time
+ *
+ * Hard-constraints:
+ * - N can not be greater than 127(7 bit field for representing N)
+ *
+ * Usage:
+ * $ gcc clocks_get_m_n.c
+ * $ ./a.out
+ */
+int get_m_n_optimized(u32 target_freq_khz, u32 ref_freq_khz, u32 *m, u32 *n,
+ u32 tolerance_khz)
+{
+ u32 min_freq = target_freq_khz - tolerance_khz;
+ u32 max_freq = target_freq_khz;
+ u32 freq, freq_old;
+ *n = 1;
+ while (1) {
+ *m = min_freq / ref_freq_khz / 2 * (*n) ;
+ freq_old = 0;
+ while (1) {
+ freq = ref_freq_khz * 2 * (*m) / (*n);
+ if (abs(target_freq_khz - freq_old) <=
+ abs(target_freq_khz - freq)) {
+ freq = freq_old;
+ (*m)--;
+ break;
+ }
+ (*m)++;
+ freq_old = freq;
+ }
+ if (freq >= min_freq && freq <= max_freq)
+ break;
+ (*n)++;
+ if ((*n) > MAX_N + 1) {
+ printf("ref %d m %d n %d target %d : ",
+ ref_freq_khz, *m, *n, target_freq_khz);
+ printf("can not find m & n - please consider"
+ " increasing tolerance\n");
+ return -1;
+ }
+ }
+ (*n)--;
+ printf("ref %d m %d n %d target %d locked %d\n",
+ ref_freq_khz, *m, *n, target_freq_khz, freq);
+ if ((ref_freq_khz / (*n + 1)) < 1000) {
+ printf("\tREFCLK - CLKINP/(N+1) is less than 1 MHz - less than"
+ " ideal, locking time will be high!\n");
+ }
+ return 0;
+}
+
+void main(void)
+{
+ u32 m, n;
+ printf("\nMPU - 2000000\n");
+ get_m_n_optimized(2000000, 12000, &m, &n, 0);
+ get_m_n_optimized(2000000, 13000, &m, &n, 0);
+ get_m_n_optimized(2000000, 16800, &m, &n, 800);
+ get_m_n_optimized(2000000, 19200, &m, &n, 0);
+ get_m_n_optimized(2000000, 26000, &m, &n, 0);
+ get_m_n_optimized(2000000, 27000, &m, &n, 0);
+ get_m_n_optimized(2000000, 38400, &m, &n, 0);
+
+ printf("\nMPU - 1200000\n");
+ get_m_n_optimized(1200000, 12000, &m, &n, 0);
+ get_m_n_optimized(1200000, 13000, &m, &n, 0);
+ get_m_n_optimized(1200000, 16800, &m, &n, 800);
+ get_m_n_optimized(1200000, 19200, &m, &n, 0);
+ get_m_n_optimized(1200000, 26000, &m, &n, 0);
+ get_m_n_optimized(1200000, 27000, &m, &n, 0);
+ get_m_n_optimized(1200000, 38400, &m, &n, 0);
+
+ printf("\nMPU - 1584000\n");
+ get_m_n_optimized(1584000, 12000, &m, &n, 0);
+ get_m_n_optimized(1584000, 13000, &m, &n, 0);
+ get_m_n_optimized(1584000, 16800, &m, &n, 400);
+ get_m_n_optimized(1584000, 19200, &m, &n, 0);
+ get_m_n_optimized(1584000, 26000, &m, &n, 0);
+ get_m_n_optimized(1584000, 27000, &m, &n, 0);
+ get_m_n_optimized(1584000, 38400, &m, &n, 0);
+
+ printf("\nCore 1600000\n");
+ get_m_n_optimized(1600000, 12000, &m, &n, 0);
+ get_m_n_optimized(1600000, 13000, &m, &n, 0);
+ get_m_n_optimized(1600000, 16800, &m, &n, 200);
+ get_m_n_optimized(1600000, 19200, &m, &n, 0);
+ get_m_n_optimized(1600000, 26000, &m, &n, 0);
+ get_m_n_optimized(1600000, 27000, &m, &n, 0);
+ get_m_n_optimized(1600000, 38400, &m, &n, 0);
+
+ printf("\nPER 1536000\n");
+ get_m_n_optimized(1536000, 12000, &m, &n, 0);
+ get_m_n_optimized(1536000, 13000, &m, &n, 0);
+ get_m_n_optimized(1536000, 16800, &m, &n, 0);
+ get_m_n_optimized(1536000, 19200, &m, &n, 0);
+ get_m_n_optimized(1536000, 26000, &m, &n, 0);
+ get_m_n_optimized(1536000, 27000, &m, &n, 0);
+ get_m_n_optimized(1536000, 38400, &m, &n, 0);
+
+ printf("\nIVA 1862000\n");
+ get_m_n_optimized(1862000, 12000, &m, &n, 0);
+ get_m_n_optimized(1862000, 13000, &m, &n, 0);
+ get_m_n_optimized(1862000, 16800, &m, &n, 0);
+ get_m_n_optimized(1862000, 19200, &m, &n, 900);
+ get_m_n_optimized(1862000, 26000, &m, &n, 0);
+ get_m_n_optimized(1862000, 27000, &m, &n, 0);
+ get_m_n_optimized(1862000, 38400, &m, &n, 800);
+
+ printf("\nABE 196608 sys clk\n");
+ get_m_n_optimized(196608, 12000, &m, &n, 700);
+ get_m_n_optimized(196608, 13000, &m, &n, 200);
+ get_m_n_optimized(196608, 16800, &m, &n, 700);
+ get_m_n_optimized(196608, 19200, &m, &n, 400);
+ get_m_n_optimized(196608, 26000, &m, &n, 200);
+ get_m_n_optimized(196608, 27000, &m, &n, 900);
+ get_m_n_optimized(196608, 38400, &m, &n, 0);
+
+ printf("\nABE 196608 32K\n");
+ get_m_n_optimized(196608000/4, 32768, &m, &n, 0);
+
+ printf("\nUSB 1920000\n");
+ get_m_n_optimized(1920000, 12000, &m, &n, 0);
+ get_m_n_optimized(1920000, 13000, &m, &n, 0);
+ get_m_n_optimized(1920000, 16800, &m, &n, 0);
+ get_m_n_optimized(1920000, 19200, &m, &n, 0);
+ get_m_n_optimized(1920000, 26000, &m, &n, 0);
+ get_m_n_optimized(1920000, 27000, &m, &n, 0);
+ get_m_n_optimized(1920000, 38400, &m, &n, 0);
+
+ printf("\nCore ES1 1523712\n");
+ get_m_n_optimized(1524000, 12000, &m, &n, 100);
+ get_m_n_optimized(1524000, 13000, &m, &n, 0);
+ get_m_n_optimized(1524000, 16800, &m, &n, 0);
+ get_m_n_optimized(1524000, 19200, &m, &n, 0);
+ get_m_n_optimized(1524000, 26000, &m, &n, 0);
+ get_m_n_optimized(1524000, 27000, &m, &n, 0);
+
+ /* exact recommendation for SDPs */
+ get_m_n_optimized(1523712, 38400, &m, &n, 0);
+
+}
diff --git a/tools/omapimage.c b/tools/omapimage.c
new file mode 100644
index 0000000..29d91cc
--- /dev/null
+++ b/tools/omapimage.c
@@ -0,0 +1,224 @@
+/*
+ * (C) Copyright 2010
+ * Linaro LTD, www.linaro.org
+ * Author: John Rigby <john.rigby@linaro.org>
+ * Based on TI's signGP.c
+ *
+ * (C) Copyright 2009
+ * Stefano Babic, DENX Software Engineering, sbabic@denx.de.
+ *
+ * (C) Copyright 2008
+ * Marvell Semiconductor <www.marvell.com>
+ * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* Required to obtain the getline prototype from stdio.h */
+#define _GNU_SOURCE
+
+#include "mkimage.h"
+#include <image.h>
+#include "omapimage.h"
+
+/* Header size is CH header rounded up to 512 bytes plus GP header */
+#define OMAP_CH_HDR_SIZE 512
+#define OMAP_GP_HDR_SIZE (sizeof(struct gp_header))
+#define OMAP_FILE_HDR_SIZE (OMAP_CH_HDR_SIZE+OMAP_GP_HDR_SIZE)
+
+static uint8_t omapimage_header[OMAP_FILE_HDR_SIZE];
+
+static int omapimage_check_image_types(uint8_t type)
+{
+ if (type == IH_TYPE_OMAPIMAGE)
+ return EXIT_SUCCESS;
+ else {
+ fprintf(stderr, "Unknown OMAP image type - %x", type);
+ return EXIT_FAILURE;
+ }
+}
+
+/*
+ * Only the simplest image type is currently supported:
+ * TOC pointing to CHSETTINGS
+ * TOC terminator
+ * CHSETTINGS
+ *
+ * padding to OMAP_CH_HDR_SIZE bytes
+ *
+ * gp header
+ * size
+ * load_addr
+ */
+static int valid_gph_size(uint32_t size)
+{
+ return size;
+}
+
+static int valid_gph_load_addr(uint32_t load_addr)
+{
+ return load_addr;
+}
+
+static int omapimage_verify_header(unsigned char *ptr, int image_size,
+ struct mkimage_params *params)
+{
+ struct ch_toc *toc = (struct ch_toc *)ptr;
+ struct gp_header *gph = (struct gp_header *)(ptr+OMAP_CH_HDR_SIZE);
+ uint32_t offset, size;
+
+ while (toc->section_offset != 0xffffffff
+ && toc->section_size != 0xffffffff) {
+ offset = toc->section_offset;
+ size = toc->section_size;
+ if (!offset || !size)
+ return -1;
+ if (offset >= OMAP_CH_HDR_SIZE ||
+ offset+size >= OMAP_CH_HDR_SIZE)
+ return -1;
+ toc++;
+ }
+ if (!valid_gph_size(gph->size))
+ return -1;
+ if (!valid_gph_load_addr(gph->load_addr))
+ return -1;
+
+ return 0;
+}
+
+static void omapimage_print_section(struct ch_settings *chs)
+{
+ const char *section_name;
+
+ if (chs->section_key)
+ section_name = "CHSETTINGS";
+ else
+ section_name = "UNKNOWNKEY";
+
+ printf("%s (%x) "
+ "valid:%x "
+ "version:%x "
+ "reserved:%x "
+ "flags:%x\n",
+ section_name,
+ chs->section_key,
+ chs->valid,
+ chs->version,
+ chs->reserved,
+ chs->flags);
+}
+
+static void omapimage_print_header(const void *ptr)
+{
+ const struct ch_toc *toc = (struct ch_toc *)ptr;
+ const struct gp_header *gph =
+ (struct gp_header *)(ptr+OMAP_CH_HDR_SIZE);
+ uint32_t offset, size;
+
+ while (toc->section_offset != 0xffffffff
+ && toc->section_size != 0xffffffff) {
+ offset = toc->section_offset;
+ size = toc->section_size;
+
+ if (offset >= OMAP_CH_HDR_SIZE ||
+ offset+size >= OMAP_CH_HDR_SIZE)
+ exit(EXIT_FAILURE);
+
+ printf("Section %s offset %x length %x\n",
+ toc->section_name,
+ toc->section_offset,
+ toc->section_size);
+
+ omapimage_print_section((struct ch_settings *)(ptr+offset));
+ toc++;
+ }
+
+ if (!valid_gph_size(gph->size)) {
+ fprintf(stderr,
+ "Error: invalid image size %x\n",
+ gph->size);
+ exit(EXIT_FAILURE);
+ }
+
+ if (!valid_gph_load_addr(gph->load_addr)) {
+ fprintf(stderr,
+ "Error: invalid image load address %x\n",
+ gph->size);
+ exit(EXIT_FAILURE);
+ }
+
+ printf("GP Header: Size %x LoadAddr %x\n",
+ gph->size, gph->load_addr);
+}
+
+static int toc_offset(void *hdr, void *member)
+{
+ return member - hdr;
+}
+
+static void omapimage_set_header(void *ptr, struct stat *sbuf, int ifd,
+ struct mkimage_params *params)
+{
+ struct ch_toc *toc = (struct ch_toc *)ptr;
+ struct ch_settings *chs = (struct ch_settings *)
+ (ptr + 2 * sizeof(*toc));
+ struct gp_header *gph = (struct gp_header *)(ptr + OMAP_CH_HDR_SIZE);
+
+ toc->section_offset = toc_offset(ptr, chs);
+ toc->section_size = sizeof(struct ch_settings);
+ strcpy((char *)toc->section_name, "CHSETTINGS");
+
+ chs->section_key = KEY_CHSETTINGS;
+ chs->valid = 0;
+ chs->version = 1;
+ chs->reserved = 0;
+ chs->flags = 0;
+
+ toc++;
+ memset(toc, 0xff, sizeof(*toc));
+
+ gph->size = sbuf->st_size - OMAP_FILE_HDR_SIZE;
+ gph->load_addr = params->addr;
+}
+
+int omapimage_check_params(struct mkimage_params *params)
+{
+ return (params->dflag && (params->fflag || params->lflag)) ||
+ (params->fflag && (params->dflag || params->lflag)) ||
+ (params->lflag && (params->dflag || params->fflag));
+}
+
+/*
+ * omapimage parameters
+ */
+static struct image_type_params omapimage_params = {
+ .name = "TI OMAP CH/GP Boot Image support",
+ .header_size = OMAP_FILE_HDR_SIZE,
+ .hdr = (void *)&omapimage_header,
+ .check_image_type = omapimage_check_image_types,
+ .verify_header = omapimage_verify_header,
+ .print_header = omapimage_print_header,
+ .set_header = omapimage_set_header,
+ .check_params = omapimage_check_params,
+};
+
+void init_omap_image_type(void)
+{
+ mkimage_register(&omapimage_params);
+}
diff --git a/tools/omapimage.h b/tools/omapimage.h
new file mode 100644
index 0000000..719db00
--- /dev/null
+++ b/tools/omapimage.h
@@ -0,0 +1,50 @@
+/*
+ * (C) Copyright 2010
+ * Linaro LTD, www.linaro.org
+ * Author John Rigby <john.rigby@linaro.org>
+ * Based on TI's signGP.c
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _OMAPIMAGE_H_
+#define _OMAPIMAGE_H_
+
+struct ch_toc {
+ uint32_t section_offset;
+ uint32_t section_size;
+ uint8_t unused[12];
+ uint8_t section_name[12];
+};
+
+struct ch_settings {
+ uint32_t section_key;
+ uint8_t valid;
+ uint8_t version;
+ uint16_t reserved;
+ uint32_t flags;
+};
+
+struct gp_header {
+ uint32_t size;
+ uint32_t load_addr;
+};
+
+#define KEY_CHSETTINGS 0xC0C0C0C1
+#endif /* _OMAPIMAGE_H_ */