* Patch by Prakash Kumar, 27 Jun 2004:
Add support for the PXA250 based Intrinsyc Cerf board.
* Patch by Yasushi Shoji, 27 Jun 2004:
fix comment in include/common.h
diff --git a/board/sbc8240/README b/board/sbc8240/README
index 703565d..71595b4 100644
--- a/board/sbc8240/README
+++ b/board/sbc8240/README
@@ -13,14 +13,14 @@
Memory Map from CPU point of view:
- Start Size Access to
+ Start Size Access to
-----------------------------------------------------
- 0x00000000 64MB SDRAM DIMM
- 0xFF000000 4MB On Board FLASH
- 0xFFF00000 512K On Board FLASH or SRAM (Configured by jumper)
- 0xFFE00000 8K EEPROM
- 0xFFE80000 8Bit LED
- 0xFFF80000 8Bit UART
+ 0x00000000 64MB SDRAM DIMM
+ 0xFF000000 4MB On Board FLASH
+ 0xFFF00000 512K On Board FLASH or SRAM (Configured by jumper)
+ 0xFFE00000 8K EEPROM
+ 0xFFE80000 8Bit LED
+ 0xFFF80000 8Bit UART
Setting the board Jumpers & Switches:
@@ -30,27 +30,27 @@
General Jumpers:
____________________________________________
- | Jumpers | Jumpers | Jumpers |
+ | Jumpers | Jumpers | Jumpers |
|-------------|--------------|---------------|
- |JP1 1-2 | JP14 1-2 | JP27 1-2 |
- |JP5 Open | JP15 1-2 | JP28 2-3 |
- |JP8 1-2 | JP16 1-2 | JP33 Open |
- |JP9 1-2 | JP17 1-2 | JP37 Close |
- |JP10 1-2 | JP18 1-2 | |
- |JP11 2-3 | JP19 1-2 | |
- |JP12 1-2 | JP20 1-2 | |
- |JP13 1-2 | JP25 Open | |
+ |JP1 1-2 | JP14 1-2 | JP27 1-2 |
+ |JP5 Open | JP15 1-2 | JP28 2-3 |
+ |JP8 1-2 | JP16 1-2 | JP33 Open |
+ |JP9 1-2 | JP17 1-2 | JP37 Close |
+ |JP10 1-2 | JP18 1-2 | |
+ |JP11 2-3 | JP19 1-2 | |
+ |JP12 1-2 | JP20 1-2 | |
+ |JP13 1-2 | JP25 Open | |
|_____________|______________|_______________|
Bus speed Jumpers:
_________________________
| 100MHz Bus | 66 MHz Bus |
|------------|------------|
- | JP2 1-2 | JP2 1-2 |
- | JP3 1-2 | JP3 2-3 |
- | JP4 1-2 | JP4 2-3 |
- | JP6 1-2 | JP6 2-3 |
- | JP7 1-2 | JP7 1-2 |
+ | JP2 1-2 | JP2 1-2 |
+ | JP3 1-2 | JP3 2-3 |
+ | JP4 1-2 | JP4 2-3 |
+ | JP6 1-2 | JP6 2-3 |
+ | JP7 1-2 | JP7 1-2 |
|____________|____________|
@@ -60,7 +60,7 @@
Board: sbc8240 Revision 255 Local Bus at 99 MHz
DRAM: 64 MB
FLASH: 512 kB
- 00 11 8086 1229 0200 00
+ 00 11 8086 1229 0200 00
In: serial
Out: serial
Err: serial
@@ -101,8 +101,8 @@
Filename 'vxWorks.st'.
Load address: 0x1000000
Loading: #################################################################
- #################################################################
- ##############################################################
+ #################################################################
+ ##############################################################
done
Bytes transferred = 979927 (ef3d7 hex)
## Ethernet MAC address not copied to NV RAM
@@ -118,23 +118,23 @@
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
- ]]]]]]]]]]] ]]]] ]]]]]]]]]] ]] ]]]] (R)
- ] ]]]]]]]]] ]]]]]] ]]]]]]]] ]] ]]]]
- ]] ]]]]]]] ]]]]]]]] ]]]]]] ] ]] ]]]]
- ]]] ]]]]] ] ]]] ] ]]]] ]]] ]]]]]]]]] ]]]] ]] ]]]] ]] ]]]]]
- ]]]] ]]] ]] ] ]]] ]] ]]]]] ]]]]]] ]] ]]]]]]] ]]]] ]] ]]]]
- ]]]]] ] ]]]] ]]]]] ]]]]]]]] ]]]] ]] ]]]] ]]]]]]] ]]]]
- ]]]]]] ]]]]] ]]]]]] ] ]]]]] ]]]] ]] ]]]] ]]]]]]]] ]]]]
- ]]]]]]] ]]]]] ] ]]]]]] ] ]]] ]]]] ]] ]]]] ]]]] ]]]] ]]]]
- ]]]]]]]] ]]]]] ]]] ]]]]]]] ] ]]]]]]] ]]]] ]]]] ]]]] ]]]]]
+ ]]]]]]]]]]] ]]]] ]]]]]]]]]] ]] ]]]] (R)
+ ] ]]]]]]]]] ]]]]]] ]]]]]]]] ]] ]]]]
+ ]] ]]]]]]] ]]]]]]]] ]]]]]] ] ]] ]]]]
+ ]]] ]]]]] ] ]]] ] ]]]] ]]] ]]]]]]]]] ]]]] ]] ]]]] ]] ]]]]]
+ ]]]] ]]] ]] ] ]]] ]] ]]]]] ]]]]]] ]] ]]]]]]] ]]]] ]] ]]]]
+ ]]]]] ] ]]]] ]]]]] ]]]]]]]] ]]]] ]] ]]]] ]]]]]]] ]]]]
+ ]]]]]] ]]]]] ]]]]]] ] ]]]]] ]]]] ]] ]]]] ]]]]]]]] ]]]]
+ ]]]]]]] ]]]]] ] ]]]]]] ] ]]] ]]]] ]] ]]]] ]]]] ]]]] ]]]]
+ ]]]]]]]] ]]]]] ]]] ]]]]]]] ] ]]]]]]] ]]]] ]]]] ]]]] ]]]]]
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
- ]]]]]]]]]]]]]]]]]]]]]]]]]]]]] Development System
+ ]]]]]]]]]]]]]]]]]]]]]]]]]]]]] Development System
]]]]]]]]]]]]]]]]]]]]]]]]]]]]
- ]]]]]]]]]]]]]]]]]]]]]]]]]]] VxWorks version 5.5.1
- ]]]]]]]]]]]]]]]]]]]]]]]]]] KERNEL: WIND version 2.6
- ]]]]]]]]]]]]]]]]]]]]]]]]] Copyright Wind River Systems, Inc., 1984-2003
+ ]]]]]]]]]]]]]]]]]]]]]]]]]]] VxWorks version 5.5.1
+ ]]]]]]]]]]]]]]]]]]]]]]]]]] KERNEL: WIND version 2.6
+ ]]]]]]]]]]]]]]]]]]]]]]]]] Copyright Wind River Systems, Inc., 1984-2003
- CPU: MPC8240 -- Wind River BSP. SBC8240 Board. Processor #0.
- Memory Size: 0x2000000. BSP version 1.2/28.
+ CPU: MPC8240 -- Wind River BSP. SBC8240 Board. Processor #0.
+ Memory Size: 0x2000000. BSP version 1.2/28.
->