arm: add support to corstone1000 platform
Corstone1000 is a platform from arm, which includes pre
verified Corstone SSE710 sub-system that combines Cortex-A and
Cortex-M processors [0].
This code adds the support for the Cortex-A35 implementation
at host side, it contains also the necessary bits to support
the Corstone 1000 FVP (Fixed Virtual Platform) [1] and also the
FPGA MPS3 board implementation of this platform. [2]
0: https://developer.arm.com/documentation/102360/0000
1: https://developer.arm.com/tools-and-software/open-source-software/arm-platforms-software/arm-ecosystem-fvps
2: https://developer.arm.com/documentation/dai0550/c/
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index c618aad..95f9253 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1352,6 +1352,12 @@
select ENV_IS_IN_FLASH if MTD
imply DISTRO_DEFAULTS
+config TARGET_CORSTONE1000
+ bool "Support Corstone1000 Platform"
+ select ARM64
+ select PL01X_SERIAL
+ select DM
+
config TARGET_TOTAL_COMPUTE
bool "Support Total Compute Platform"
select ARM64
@@ -2300,7 +2306,7 @@
source "arch/arm/mach-npcm/Kconfig"
source "board/armltd/total_compute/Kconfig"
-
+source "board/armltd/corstone1000/Kconfig"
source "board/bosch/shc/Kconfig"
source "board/bosch/guardian/Kconfig"
source "board/Marvell/octeontx/Kconfig"
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 2fa3957..2873d04 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -1273,6 +1273,9 @@
dtb-$(CONFIG_ARCH_QEMU) += qemu-arm.dtb qemu-arm64.dtb
+dtb-$(CONFIG_TARGET_CORSTONE1000) += corstone1000-mps3.dtb \
+ corstone1000-fvp.dtb
+
include $(srctree)/scripts/Makefile.dts
targets += $(dtb-y)
diff --git a/arch/arm/dts/corstone1000-fvp.dts b/arch/arm/dts/corstone1000-fvp.dts
new file mode 100644
index 0000000..26b0f1b
--- /dev/null
+++ b/arch/arm/dts/corstone1000-fvp.dts
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: GPL-2.0 or MIT
+/*
+ * Copyright (c) 2022, Arm Limited. All rights reserved.
+ * Copyright (c) 2022, Linaro Limited. All rights reserved.
+ *
+ */
+
+/dts-v1/;
+
+#include "corstone1000.dtsi"
+
+/ {
+ model = "ARM Corstone1000 FVP (Fixed Virtual Platform)";
+ compatible = "arm,corstone1000-fvp";
+
+ smsc: ethernet@4010000 {
+ compatible = "smsc,lan91c111";
+ reg = <0x40100000 0x10000>;
+ phy-mode = "mii";
+ interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+ reg-io-width = <2>;
+ };
+
+ vmmc_v3_3d: fixed_v3_3d {
+ compatible = "regulator-fixed";
+ regulator-name = "vmmc_supply";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ sdmmc0: mmc@40300000 {
+ compatible = "arm,pl18x", "arm,primecell";
+ reg = <0x40300000 0x1000>;
+ interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+ max-frequency = <12000000>;
+ vmmc-supply = <&vmmc_v3_3d>;
+ clocks = <&smbclk>, <&refclk100mhz>;
+ clock-names = "smclk", "apb_pclk";
+ };
+
+ sdmmc1: mmc@50000000 {
+ compatible = "arm,pl18x", "arm,primecell";
+ reg = <0x50000000 0x10000>;
+ interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+ max-frequency = <12000000>;
+ vmmc-supply = <&vmmc_v3_3d>;
+ clocks = <&smbclk>, <&refclk100mhz>;
+ clock-names = "smclk", "apb_pclk";
+ };
+};
diff --git a/arch/arm/dts/corstone1000-mps3.dts b/arch/arm/dts/corstone1000-mps3.dts
new file mode 100644
index 0000000..e314674
--- /dev/null
+++ b/arch/arm/dts/corstone1000-mps3.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0 or MIT
+/*
+ * Copyright (c) 2022, Arm Limited. All rights reserved.
+ * Copyright (c) 2022, Linaro Limited. All rights reserved.
+ *
+ */
+
+/dts-v1/;
+
+#include "corstone1000.dtsi"
+
+/ {
+ model = "ARM Corstone1000 FPGA MPS3 board";
+ compatible = "arm,corstone1000-mps3";
+
+ smsc: ethernet@4010000 {
+ compatible = "smsc,lan9220", "smsc,lan9115";
+ reg = <0x40100000 0x10000>;
+ phy-mode = "mii";
+ interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+ reg-io-width = <2>;
+ smsc,irq-push-pull;
+ };
+
+ usb_host: usb@40200000 {
+ compatible = "nxp,usb-isp1763";
+ reg = <0x40200000 0x100000>;
+ interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+ bus-width = <16>;
+ dr_mode = "host";
+ };
+};
diff --git a/arch/arm/dts/corstone1000.dtsi b/arch/arm/dts/corstone1000.dtsi
new file mode 100644
index 0000000..4e46826
--- /dev/null
+++ b/arch/arm/dts/corstone1000.dtsi
@@ -0,0 +1,164 @@
+// SPDX-License-Identifier: GPL-2.0 or MIT
+/*
+ * Copyright (c) 2022, Arm Limited. All rights reserved.
+ * Copyright (c) 2022, Linaro Limited. All rights reserved.
+ *
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ interrupt-parent = <&gic>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a35";
+ reg = <0>;
+ next-level-cache = <&L2_0>;
+ };
+ };
+
+ memory@88200000 {
+ device_type = "memory";
+ reg = <0x88200000 0x77e00000>;
+ };
+
+ gic: interrupt-controller@1c000000 {
+ compatible = "arm,gic-400";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0x1c010000 0x1000>,
+ <0x1c02f000 0x2000>,
+ <0x1c04f000 0x1000>,
+ <0x1c06f000 0x2000>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(1) |
+ IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ L2_0: l2-cache0 {
+ compatible = "cache";
+ cache-level = <2>;
+ cache-size = <0x80000>;
+ cache-line-size = <64>;
+ cache-sets = <1024>;
+ };
+
+ refclk100mhz: refclk100mhz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <100000000>;
+ clock-output-names = "apb_pclk";
+ };
+
+ smbclk: refclk24mhzx2 {
+ /* Reference 24MHz clock x 2 */
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <48000000>;
+ clock-output-names = "smclk";
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) |
+ IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) |
+ IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) |
+ IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) |
+ IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ uartclk: uartclk {
+ /* UART clock - 50MHz */
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <50000000>;
+ clock-output-names = "uartclk";
+ };
+
+ psci {
+ compatible = "arm,psci-1.0", "arm,psci-0.2";
+ method = "smc";
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&gic>;
+ ranges;
+
+ timer@1a220000 {
+ compatible = "arm,armv7-timer-mem";
+ reg = <0x1a220000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clock-frequency = <50000000>;
+ ranges;
+
+ frame@1a230000 {
+ frame-number = <0>;
+ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x1a230000 0x1000>;
+ };
+ };
+
+ uart0: serial@1a510000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x1a510000 0x1000>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&uartclk>, <&refclk100mhz>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ uart1: serial@1a520000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x1a520000 0x1000>;
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&uartclk>, <&refclk100mhz>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ mhu_hse1: mailbox@1b820000 {
+ compatible = "arm,mhuv2-tx", "arm,primecell";
+ reg = <0x1b820000 0x1000>;
+ clocks = <&refclk100mhz>;
+ clock-names = "apb_pclk";
+ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+ #mbox-cells = <2>;
+ arm,mhuv2-protocols = <0 0>;
+ secure-status = "okay"; /* secure-world-only */
+ status = "disabled";
+ };
+
+ mhu_seh1: mailbox@1b830000 {
+ compatible = "arm,mhuv2-rx", "arm,primecell";
+ reg = <0x1b830000 0x1000>;
+ clocks = <&refclk100mhz>;
+ clock-names = "apb_pclk";
+ interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+ #mbox-cells = <2>;
+ arm,mhuv2-protocols = <0 0>;
+ secure-status = "okay"; /* secure-world-only */
+ status = "disabled";
+ };
+ };
+};