imx: ventana: make OTG VBUS power enable board specific
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Stefano Babic <sbabic@denx.de>
diff --git a/board/gateworks/gw_ventana/common.c b/board/gateworks/gw_ventana/common.c
index 49d6e52..a33c112 100644
--- a/board/gateworks/gw_ventana/common.c
+++ b/board/gateworks/gw_ventana/common.c
@@ -586,6 +586,7 @@
.rs485en = IMX_GPIO_NR(3, 24),
.dioi2c_en = IMX_GPIO_NR(4, 5),
.pcie_sson = IMX_GPIO_NR(1, 20),
+ .otgpwr_en = IMX_GPIO_NR(3, 22),
},
/* GW51xx */
@@ -604,6 +605,7 @@
.gps_shdn = IMX_GPIO_NR(1, 2),
.vidin_en = IMX_GPIO_NR(5, 20),
.wdis = IMX_GPIO_NR(7, 12),
+ .otgpwr_en = IMX_GPIO_NR(3, 22),
},
/* GW52xx */
@@ -626,6 +628,7 @@
.wdis = IMX_GPIO_NR(7, 12),
.msata_en = GP_MSATA_SEL,
.rs232_en = GP_RS232_EN,
+ .otgpwr_en = IMX_GPIO_NR(3, 22),
},
/* GW53xx */
@@ -647,6 +650,7 @@
.wdis = IMX_GPIO_NR(7, 12),
.msata_en = GP_MSATA_SEL,
.rs232_en = GP_RS232_EN,
+ .otgpwr_en = IMX_GPIO_NR(3, 22),
},
/* GW54xx */
@@ -670,6 +674,7 @@
.wdis = IMX_GPIO_NR(5, 17),
.msata_en = GP_MSATA_SEL,
.rs232_en = GP_RS232_EN,
+ .otgpwr_en = IMX_GPIO_NR(3, 22),
},
/* GW551x */
@@ -715,6 +720,7 @@
.pcie_rst = IMX_GPIO_NR(1, 0),
.vidin_en = IMX_GPIO_NR(5, 20),
.wdis = IMX_GPIO_NR(7, 12),
+ .otgpwr_en = IMX_GPIO_NR(3, 22),
},
};
@@ -725,10 +731,6 @@
/* iomux common to all Ventana boards */
SETUP_IOMUX_PADS(gw_gpio_pads);
- /* OTG power off */
- gpio_request(GP_USB_OTG_PWR, "usbotg_pwr");
- gpio_direction_output(GP_USB_OTG_PWR, 0);
-
if (board >= GW_UNKNOWN)
return;
@@ -818,6 +820,12 @@
gpio_direction_output(gpio_cfg[board].wdis, 1);
}
+ /* OTG power off */
+ if (gpio_cfg[board].otgpwr_en) {
+ gpio_request(gpio_cfg[board].otgpwr_en, "usbotg_pwr");
+ gpio_direction_output(gpio_cfg[board].otgpwr_en, 0);
+ }
+
/* sense vselect pin to see if we support uhs-i */
gpio_request(GP_SD3_VSELECT, "sd3_vselect");
gpio_direction_input(GP_SD3_VSELECT);