imx: Refactoring CAAM Job Ring structure and Secure Memory for imx7
Refactored data structure for CAAM's job ring and Secure Memory
to support i.MX7.
The new memory map use macros to resolve SM's offset by version.
This will solve the versioning issue caused by the new version of
secure memory of i.MX7
Signed-off-by: Ulises Cardenas <raul.casas@nxp.com>
Reviewed-by: Stefano Babic <sbabic@denx.de>
diff --git a/arch/arm/include/asm/arch-mx7/imx-regs.h b/arch/arm/include/asm/arch-mx7/imx-regs.h
index 58a25c7..105043a 100644
--- a/arch/arm/include/asm/arch-mx7/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx7/imx-regs.h
@@ -216,6 +216,9 @@
#define FEC_QUIRK_ENET_MAC
#define SNVS_LPGPR 0x68
+#define CONFIG_SYS_FSL_SEC_ADDR (CAAM_IPS_BASE_ADDR)
+#define CONFIG_SYS_FSL_JR0_ADDR (CONFIG_SYS_FSL_SEC_ADDR + 0x1000)
+
#if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__))
#include <asm/imx-common/regs-lcdif.h>
#include <asm/types.h>
diff --git a/drivers/crypto/fsl/jobdesc.c b/drivers/crypto/fsl/jobdesc.c
index 5695bef..fd0c4f7 100644
--- a/drivers/crypto/fsl/jobdesc.c
+++ b/drivers/crypto/fsl/jobdesc.c
@@ -14,7 +14,7 @@
#include "jobdesc.h"
#include "rsa_caam.h"
-#ifdef CONFIG_MX6
+#if defined(CONFIG_MX6) || defined(CONFIG_MX7)
/*!
* Secure memory run command
*
@@ -25,10 +25,14 @@
{
uint32_t temp_reg;
- sec_out32(CAAM_SMCJR0, sec_mem_cmd);
+ ccsr_sec_t *sec = (void *)CONFIG_SYS_FSL_SEC_ADDR;
+ uint32_t sm_vid = SM_VERSION(sec_in32(&sec->smvid));
+ uint32_t jr_id = 0;
+
+ sec_out32(CAAM_SMCJR(sm_vid, jr_id), sec_mem_cmd);
do {
- temp_reg = sec_in32(CAAM_SMCSJR0);
+ temp_reg = sec_in32(CAAM_SMCSJR(sm_vid, jr_id));
} while (temp_reg & CMD_COMPLETE);
return temp_reg;
@@ -51,6 +55,10 @@
{
uint32_t temp_reg;
+ ccsr_sec_t *sec = (void *)CONFIG_SYS_FSL_SEC_ADDR;
+ uint32_t sm_vid = SM_VERSION(sec_in32(&sec->smvid));
+ uint32_t jr_id = 0;
+
/*
* De-Allocate partition_num if already allocated to ARM core
*/
@@ -64,9 +72,9 @@
}
/* set the access rights to allow full access */
- sec_out32(CAAM_SMAG1JR0(partition_num), 0xF);
- sec_out32(CAAM_SMAG2JR0(partition_num), 0xF);
- sec_out32(CAAM_SMAPJR0(partition_num), 0xFF);
+ sec_out32(CAAM_SMAG1JR(sm_vid, jr_id, partition_num), 0xF);
+ sec_out32(CAAM_SMAG2JR(sm_vid, jr_id, partition_num), 0xF);
+ sec_out32(CAAM_SMAPJR(sm_vid, jr_id, partition_num), 0xFF);
/* Now need to allocate partition_num of secure RAM. */
/* De-Allocate page_num by starting with a page inquiry command */
@@ -105,6 +113,10 @@
int inline_cnstr_jobdesc_blob_dek(uint32_t *desc, const uint8_t *plain_txt,
uint8_t *dek_blob, uint32_t in_sz)
{
+ ccsr_sec_t *sec = (void *)CONFIG_SYS_FSL_SEC_ADDR;
+ uint32_t sm_vid = SM_VERSION(sec_in32(&sec->smvid));
+ uint32_t jr_id = 0;
+
uint32_t ret = 0;
u32 aad_w1, aad_w2;
/* output blob will have 32 bytes key blob in beginning and
@@ -133,9 +145,9 @@
flush_dcache_range(start, end);
/* Now configure the access rights of the partition */
- sec_out32(CAAM_SMAG1JR0(PARTITION_1), KS_G1); /* set group 1 */
- sec_out32(CAAM_SMAG2JR0(PARTITION_1), 0); /* clear group 2 */
- sec_out32(CAAM_SMAPJR0(PARTITION_1), PERM); /* set perm & locks */
+ sec_out32(CAAM_SMAG1JR(sm_vid, jr_id, PARTITION_1), KS_G1);
+ sec_out32(CAAM_SMAG2JR(sm_vid, jr_id, PARTITION_1), 0);
+ sec_out32(CAAM_SMAPJR(sm_vid, jr_id, PARTITION_1), PERM);
/* construct aad for AES */
aad_w1 = (in_sz << OP_ALG_ALGSEL_SHIFT) | KEY_AES_SRC | LD_CCM_MODE;
diff --git a/include/fsl_sec.h b/include/fsl_sec.h
index 2ddced3..a52110a 100644
--- a/include/fsl_sec.h
+++ b/include/fsl_sec.h
@@ -97,19 +97,20 @@
u32 drr; /* DECO Reset Register */
u8 res5[0x4d8];
struct rng4tst rng; /* RNG Registers */
- u8 res11[0x8a0];
+ u8 res6[0x8a0];
u32 crnr_ms; /* CHA Revision Number Register, MS */
u32 crnr_ls; /* CHA Revision Number Register, LS */
u32 ctpr_ms; /* Compile Time Parameters Register, MS */
u32 ctpr_ls; /* Compile Time Parameters Register, LS */
- u8 res6[0x10];
+ u8 res7[0x10];
u32 far_ms; /* Fault Address Register, MS */
u32 far_ls; /* Fault Address Register, LS */
u32 falr; /* Fault Address LIODN Register */
u32 fadr; /* Fault Address Detail Register */
- u8 res7[0x4];
+ u8 res8[0x4];
u32 csta; /* CAAM Status Register */
- u8 res8[0x8];
+ u32 smpart; /* Secure Memory Partition Parameters */
+ u32 smvid; /* Secure Memory Version ID */
u32 rvid; /* Run Time Integrity Checking Version ID Reg.*/
u32 ccbvid; /* CHA Cluster Block Version ID Register */
u32 chavid_ms; /* CHA Version ID Register, MS */
@@ -147,7 +148,8 @@
#define CONFIG_JRSTARTR_JR0 0x00000001
struct jr_regs {
-#if defined(CONFIG_SYS_FSL_SEC_LE) && !defined(CONFIG_MX6)
+#if defined(CONFIG_SYS_FSL_SEC_LE) && \
+ !(defined(CONFIG_MX6) || defined(CONFIG_MX7))
u32 irba_l;
u32 irba_h;
#else
@@ -160,7 +162,8 @@
u32 irsa;
u32 rsvd3;
u32 irja;
-#if defined(CONFIG_SYS_FSL_SEC_LE) && !defined(CONFIG_MX6)
+#if defined(CONFIG_SYS_FSL_SEC_LE) && \
+ !(defined(CONFIG_MX6) || defined(CONFIG_MX7))
u32 orba_l;
u32 orba_h;
#else
@@ -192,7 +195,8 @@
* related information
*/
struct sg_entry {
-#if defined(CONFIG_SYS_FSL_SEC_LE) && !defined(CONFIG_MX6)
+#if defined(CONFIG_SYS_FSL_SEC_LE) && \
+ !(defined(CONFIG_MX6) || defined(CONFIG_MX7))
uint32_t addr_lo; /* Memory Address - lo */
uint32_t addr_hi; /* Memory Address of start of buffer - hi */
#else
@@ -211,26 +215,43 @@
#define SG_ENTRY_OFFSET_SHIFT 0
};
-#ifdef CONFIG_MX6
+#if defined(CONFIG_MX6) || defined(CONFIG_MX7)
+/* Job Ring Base Address */
+#define JR_BASE_ADDR(x) (CONFIG_SYS_FSL_SEC_ADDR + 0x1000 * (x + 1))
+/* Secure Memory Offset varies accross versions */
+#define SM_V1_OFFSET 0x0f4
+#define SM_V2_OFFSET 0xa00
+/*Secure Memory Versioning */
+#define SMVID_V2 0x20105
+#define SM_VERSION(x) (x < SMVID_V2 ? 1 : 2)
+#define SM_OFFSET(x) (x == 1 ? SM_V1_OFFSET : SM_V2_OFFSET)
/* CAAM Job Ring 0 Registers */
/* Secure Memory Partition Owner register */
#define SMCSJR_PO (3 << 6)
/* JR Allocation Error */
#define SMCSJR_AERR (3 << 12)
/* Secure memory partition 0 page 0 owner register */
-#define CAAM_SMPO_0 CONFIG_SYS_FSL_SEC_ADDR + 0x1FBC
+#define CAAM_SMPO_0 (CONFIG_SYS_FSL_SEC_ADDR + 0x1FBC)
/* Secure memory command register */
-#define CAAM_SMCJR0 CONFIG_SYS_FSL_SEC_ADDR + 0x10f4
+#define CAAM_SMCJR(v, jr) (JR_BASE_ADDR(jr) + SM_OFFSET(v) + SM_CMD(v))
/* Secure memory command status register */
-#define CAAM_SMCSJR0 CONFIG_SYS_FSL_SEC_ADDR + 0x10fc
+#define CAAM_SMCSJR(v, jr) (JR_BASE_ADDR(jr) + SM_OFFSET(v) + SM_STATUS(v))
/* Secure memory access permissions register */
-#define CAAM_SMAPJR0(y) (CONFIG_SYS_FSL_SEC_ADDR + 0x1104 + y*16)
+#define CAAM_SMAPJR(v, jr, y) \
+ (JR_BASE_ADDR(jr) + SM_OFFSET(v) + SM_PERM(v) + y * 16)
/* Secure memory access group 2 register */
-#define CAAM_SMAG2JR0(y) (CONFIG_SYS_FSL_SEC_ADDR + 0x1108 + y*16)
+#define CAAM_SMAG2JR(v, jr, y) \
+ (JR_BASE_ADDR(jr) + SM_OFFSET(v) + SM_GROUP2(v) + y * 16)
/* Secure memory access group 1 register */
-#define CAAM_SMAG1JR0(y) (CONFIG_SYS_FSL_SEC_ADDR + 0x110C + y*16)
+#define CAAM_SMAG1JR(v, jr, y) \
+ (JR_BASE_ADDR(jr) + SM_OFFSET(v) + SM_GROUP1(v) + y * 16)
/* Commands and macros for secure memory */
+#define SM_CMD(v) (v == 1 ? 0x0 : 0x1E4)
+#define SM_STATUS(v) (v == 1 ? 0x8 : 0x1EC)
+#define SM_PERM(v) (v == 1 ? 0x10 : 0x4)
+#define SM_GROUP2(v) (v == 1 ? 0x14 : 0x8)
+#define SM_GROUP1(v) (v == 1 ? 0x18 : 0xC)
#define CMD_PAGE_ALLOC 0x1
#define CMD_PAGE_DEALLOC 0x2
#define CMD_PART_DEALLOC 0x3