ARM: rmobile: Update E2 Silk
The E2 Silk port was broken since some time. This patch updates
the E2 Silk port to use modern frameworks, DM, DT probing, SPL
for the preloading and puts it on par with the M2 Porter board.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
---
NOTE: The port is missing support for I2C1 for DA9063 reset, since the
I2C driver needs to be converted to DM and DT probing. That's not
an issue for this patch though, since the reset was broken on Silk
since forever.
diff --git a/include/configs/silk.h b/include/configs/silk.h
index ba49c19..5f351b5 100644
--- a/include/configs/silk.h
+++ b/include/configs/silk.h
@@ -16,12 +16,8 @@
#include "rcar-gen2-common.h"
-#if defined(CONFIG_ARCH_RMOBILE_EXTRAM_BOOT)
-#define CONFIG_SYS_INIT_SP_ADDR 0x7003FFFC
-#else
-#define CONFIG_SYS_INIT_SP_ADDR 0xE633FFFC
-#endif
-#define STACK_AREA_SIZE 0xC000
+#define CONFIG_SYS_INIT_SP_ADDR 0x4f000000
+#define STACK_AREA_SIZE 0x00100000
#define LOW_LEVEL_MERAM_STACK \
(CONFIG_SYS_INIT_SP_ADDR + STACK_AREA_SIZE - 4)
@@ -49,45 +45,22 @@
/* Board Clock */
#define RMOBILE_XTAL_CLK 20000000u
#define CONFIG_SYS_CLK_FREQ RMOBILE_XTAL_CLK
-#define CONFIG_SH_TMU_CLK_FREQ (CONFIG_SYS_CLK_FREQ / 2) /* EXT / 2 */
-#define CONFIG_PLL1_CLK_FREQ (CONFIG_SYS_CLK_FREQ * 156 / 2)
-#define CONFIG_P_CLK_FREQ (CONFIG_PLL1_CLK_FREQ / 24)
+#define CONFIG_SH_TMU_CLK_FREQ (CONFIG_SYS_CLK_FREQ / 2)
-#define CONFIG_SYS_TMU_CLK_DIV 4
+#define CONFIG_SYS_TMU_CLK_DIV 4
-/* i2c */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_SH
-#define CONFIG_SYS_I2C_SLAVE 0x7F
-#define CONFIG_SYS_I2C_SH_NUM_CONTROLLERS 3
-#define CONFIG_SYS_I2C_SH_SPEED0 400000
-#define CONFIG_SYS_I2C_SH_SPEED1 400000
-#define CONFIG_SYS_I2C_SH_SPEED2 400000
-#define CONFIG_SH_I2C_DATA_HIGH 4
-#define CONFIG_SH_I2C_DATA_LOW 5
-#define CONFIG_SH_I2C_CLOCK 10000000
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "fdt_high=0xffffffff\0" \
+ "initrd_high=0xffffffff\0"
-#define CONFIG_SYS_I2C_POWERIC_ADDR 0x58 /* da9063 */
-
-/* USB */
-#define CONFIG_USB_EHCI_RMOBILE
-#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
-
-/* MMCIF */
-#define CONFIG_SH_MMCIF_ADDR 0xee200000
-#define CONFIG_SH_MMCIF_CLK 48000000
-
-/* SDHI */
-#define CONFIG_SH_SDHI_FREQ 97500000
-
-/* Module stop status bits */
-/* INTC-RT */
-#define CONFIG_SMSTP0_ENA 0x00400000
-/* MSIF */
-#define CONFIG_SMSTP2_ENA 0x00002000
-/* INTC-SYS, IRQC */
-#define CONFIG_SMSTP4_ENA 0x00000180
-/* SCIF2 */
-#define CONFIG_SMSTP7_ENA 0x00080000
+/* SPL support */
+#define CONFIG_SPL_TEXT_BASE 0xe6300000
+#define CONFIG_SPL_STACK 0xe6340000
+#define CONFIG_SPL_MAX_SIZE 0x4000
+#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x140000
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_CONS_SCIF2
+#define CONFIG_SH_SCIF_CLK_FREQ 65000000
+#endif
#endif /* __SILK_H */