ppc4xx: Change 4xx POST ethernet test to handle cached memory too
This patch enables the 4xx EMAC POST driver to work too, when dcache is
enabled.
Signed-off-by: Stefan Roese <sr@denx.de>
diff --git a/post/cpu/ppc4xx/ether.c b/post/cpu/ppc4xx/ether.c
index 45f292b..09f9a5f 100644
--- a/post/cpu/ppc4xx/ether.c
+++ b/post/cpu/ppc4xx/ether.c
@@ -169,6 +169,8 @@
rx.ctrl = MAL_TX_CTRL_WRAP | MAL_RX_CTRL_EMPTY;
rx.data_len = 0;
rx.data_ptr = (char*)L1_CACHE_ALIGN((u32)rx_buf);
+ flush_dcache_range((u32)&rx, (u32)&rx + sizeof(mal_desc_t));
+ flush_dcache_range((u32)&tx, (u32)&tx + sizeof(mal_desc_t));
switch (devnum) {
case 1:
@@ -290,11 +292,14 @@
return;
}
udelay (1000);
+ invalidate_dcache_range((u32)&tx, (u32)&tx + sizeof(mal_desc_t));
}
tx.ctrl = MAL_TX_CTRL_READY | MAL_TX_CTRL_WRAP | MAL_TX_CTRL_LAST |
EMAC_TX_CTRL_GFCS | EMAC_TX_CTRL_GP;
tx.data_len = length;
memcpy (tx.data_ptr, packet, length);
+ flush_dcache_range((u32)&tx, (u32)&tx + sizeof(mal_desc_t));
+ flush_dcache_range((u32)tx.data_ptr, (u32)tx.data_ptr + length);
sync ();
out32 (EMAC_TXM0 + hw_addr, in32 (EMAC_TXM0 + hw_addr) | EMAC_TXM0_GNP0);
@@ -312,13 +317,17 @@
return 0;
}
udelay (1000);
+ invalidate_dcache_range((u32)&rx, (u32)&rx + sizeof(mal_desc_t));
}
length = rx.data_len - 4;
- if (length <= max_length)
+ if (length <= max_length) {
+ invalidate_dcache_range((u32)rx.data_ptr, (u32)rx.data_ptr + length);
memcpy(packet, rx.data_ptr, length);
+ }
sync ();
rx.ctrl |= MAL_RX_CTRL_EMPTY;
+ flush_dcache_range((u32)&rx, (u32)&rx + sizeof(mal_desc_t));
sync ();
return length;