powerpc/chassis2: Change core numbering scheme

To align with chassis generation 2 spec, all cores are numbered in sequence.
The cores may reside across multiple clusters. Each cluster has zero to four
cores. The first available core is numbered as core 0. The second available
core is numbered as core 1 and so on.

Core clocks are generated by each clusters. To identify the cluster of each
core, topology registers are examined.

Cluster clock registers are reorganized to be easily indexed.

Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
diff --git a/arch/powerpc/cpu/mpc8xxx/cpu.c b/arch/powerpc/cpu/mpc8xxx/cpu.c
index 23e008e..bc26855 100644
--- a/arch/powerpc/cpu/mpc8xxx/cpu.c
+++ b/arch/powerpc/cpu/mpc8xxx/cpu.c
@@ -103,35 +103,70 @@
 };
 
 #ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
+static inline u32 init_type(u32 cluster, int init_id)
+{
+	ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	u32 idx = (cluster >> (init_id * 8)) & TP_CLUSTER_INIT_MASK;
+	u32 type = in_be32(&gur->tp_ityp[idx]);
+
+	if (type & TP_ITYP_AV)
+		return type;
+
+	return 0;
+}
+
 u32 compute_ppc_cpumask(void)
 {
-	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 	int i = 0, count = 0;
-	u32 cluster, mask = 0;
+	u32 cluster, type, mask = 0;
 
 	do {
 		int j;
-		cluster = in_be32(&gur->tp_cluster[i++].lower);
-		for (j = 0; j < 4; j++) {
-			u32 idx = (cluster >> (j*8)) & TP_CLUSTER_INIT_MASK;
-			u32 type = in_be32(&gur->tp_ityp[idx]);
-
-			if (type & TP_ITYP_AV) {
+		cluster = in_be32(&gur->tp_cluster[i].lower);
+		for (j = 0; j < TP_INIT_PER_CLUSTER; j++) {
+			type = init_type(cluster, j);
+			if (type) {
 				if (TP_ITYP_TYPE(type) == TP_ITYP_TYPE_PPC)
 					mask |= 1 << count;
+				count++;
 			}
-			count++;
 		}
+		i++;
 	} while ((cluster & TP_CLUSTER_EOC) != TP_CLUSTER_EOC);
 
 	return mask;
 }
+
+int fsl_qoriq_core_to_cluster(unsigned int core)
+{
+	ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	int i = 0, count = 0;
+	u32 cluster;
+
+	do {
+		int j;
+		cluster = in_be32(&gur->tp_cluster[i].lower);
+		for (j = 0; j < TP_INIT_PER_CLUSTER; j++) {
+			if (init_type(cluster, j)) {
+				if (count == core)
+					return i;
+				count++;
+			}
+		}
+		i++;
+	} while ((cluster & TP_CLUSTER_EOC) != TP_CLUSTER_EOC);
+
+	return -1;	/* cannot identify the cluster */
+}
+
 #else /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */
 /*
  * Before chassis genenration 2, the cpumask should be hard-coded.
  * In case of cpu type unknown or cpumask unset, use 1 as fail save.
  */
 #define compute_ppc_cpumask()	1
+#define fsl_qoriq_core_to_cluster(x) x
 #endif /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */
 
 static struct cpu_type cpu_type_unknown = CPU_TYPE_ENTRY(Unknown, Unknown, 0);