x86: ivybridge: Perform initial CPU setup
Set up the flex ratio (controls speed versus heat output) and a few other
very early things.
Signed-off-by: Simon Glass <sjg@chromium.org>
diff --git a/arch/x86/include/asm/arch-ivybridge/pch.h b/arch/x86/include/asm/arch-ivybridge/pch.h
index 26ddeab..c572f76 100644
--- a/arch/x86/include/asm/arch-ivybridge/pch.h
+++ b/arch/x86/include/asm/arch-ivybridge/pch.h
@@ -35,6 +35,66 @@
#define LPC_GEN4_DEC 0x90 /* LPC IF Generic Decode Range 4 */
#define LPC_GENX_DEC(x) (0x84 + 4 * (x))
+#define DEFAULT_RCBA 0xfed1c000
+
+/* Root Complex Register Block */
+#define RCB_REG(reg) (DEFAULT_RCBA + (reg))
+
+#define PCH_RCBA_BASE 0xf0
+
+#define VCH 0x0000 /* 32bit */
+#define VCAP1 0x0004 /* 32bit */
+#define VCAP2 0x0008 /* 32bit */
+#define PVC 0x000c /* 16bit */
+#define PVS 0x000e /* 16bit */
+
+#define V0CAP 0x0010 /* 32bit */
+#define V0CTL 0x0014 /* 32bit */
+#define V0STS 0x001a /* 16bit */
+
+#define V1CAP 0x001c /* 32bit */
+#define V1CTL 0x0020 /* 32bit */
+#define V1STS 0x0026 /* 16bit */
+
+#define RCTCL 0x0100 /* 32bit */
+#define ESD 0x0104 /* 32bit */
+#define ULD 0x0110 /* 32bit */
+#define ULBA 0x0118 /* 64bit */
+
+#define RP1D 0x0120 /* 32bit */
+#define RP1BA 0x0128 /* 64bit */
+#define RP2D 0x0130 /* 32bit */
+#define RP2BA 0x0138 /* 64bit */
+#define RP3D 0x0140 /* 32bit */
+#define RP3BA 0x0148 /* 64bit */
+#define RP4D 0x0150 /* 32bit */
+#define RP4BA 0x0158 /* 64bit */
+#define HDD 0x0160 /* 32bit */
+#define HDBA 0x0168 /* 64bit */
+#define RP5D 0x0170 /* 32bit */
+#define RP5BA 0x0178 /* 64bit */
+#define RP6D 0x0180 /* 32bit */
+#define RP6BA 0x0188 /* 64bit */
+
+#define RPC 0x0400 /* 32bit */
+#define RPFN 0x0404 /* 32bit */
+
+#define SPI_FREQ_SWSEQ 0x3893
+#define SPI_DESC_COMP0 0x38b0
+#define SPI_FREQ_WR_ERA 0x38b4
+#define SOFT_RESET_CTRL 0x38f4
+#define SOFT_RESET_DATA 0x38f8
+
+#define RC 0x3400 /* 32bit */
+#define HPTC 0x3404 /* 32bit */
+#define GCS 0x3410 /* 32bit */
+#define BUC 0x3414 /* 32bit */
+#define PCH_DISABLE_GBE (1 << 5)
+#define FD 0x3418 /* 32bit */
+#define DISPBDF 0x3424 /* 16bit */
+#define FD2 0x3428 /* 32bit */
+#define CG 0x341c /* 32bit */
+
/**
* lpc_early_init() - set up LPC serial ports and other early things
*