global: Migrate CONFIG_PL011_CLOCK to CFG
Perform a simple rename of CONFIG_PL011_CLOCK to CFG_PL011_CLOCK
Signed-off-by: Tom Rini <trini@konsulko.com>
diff --git a/README b/README
index 0561835..8354cf5 100644
--- a/README
+++ b/README
@@ -413,7 +413,7 @@
controller register space
- Serial Ports:
- CONFIG_PL011_CLOCK
+ CFG_PL011_CLOCK
If you have Amba PrimeCell PL011 UARTs, set this variable to
the clock speed of the UARTs.
diff --git a/arch/arm/cpu/armv7/s5p4418/cpu.c b/arch/arm/cpu/armv7/s5p4418/cpu.c
index 3baa761..7ba9c0b 100644
--- a/arch/arm/cpu/armv7/s5p4418/cpu.c
+++ b/arch/arm/cpu/armv7/s5p4418/cpu.c
@@ -64,7 +64,7 @@
/* set clock */
clk_disable(clk);
- clk_set_rate(clk, CONFIG_PL011_CLOCK);
+ clk_set_rate(clk, CFG_PL011_CLOCK);
clk_enable(clk);
}
#endif
diff --git a/board/armltd/total_compute/total_compute.c b/board/armltd/total_compute/total_compute.c
index b7772f7..53941b5 100644
--- a/board/armltd/total_compute/total_compute.c
+++ b/board/armltd/total_compute/total_compute.c
@@ -13,7 +13,7 @@
static const struct pl01x_serial_plat serial_plat = {
.base = UART0_BASE,
.type = TYPE_PL011,
- .clock = CONFIG_PL011_CLOCK,
+ .clock = CFG_PL011_CLOCK,
};
U_BOOT_DRVINFO(total_compute_serials) = {
diff --git a/board/armltd/vexpress64/vexpress64.c b/board/armltd/vexpress64/vexpress64.c
index 4ca544f..99fb67e 100644
--- a/board/armltd/vexpress64/vexpress64.c
+++ b/board/armltd/vexpress64/vexpress64.c
@@ -29,7 +29,7 @@
static const struct pl01x_serial_plat serial_plat = {
.base = V2M_UART0,
.type = TYPE_PL011,
- .clock = CONFIG_PL011_CLOCK,
+ .clock = CFG_PL011_CLOCK,
};
U_BOOT_DRVINFO(vexpress_serials) = {
diff --git a/drivers/serial/serial_pl01x.c b/drivers/serial/serial_pl01x.c
index d3c3d3e..dd28819 100644
--- a/drivers/serial/serial_pl01x.c
+++ b/drivers/serial/serial_pl01x.c
@@ -193,7 +193,7 @@
#if defined(CONFIG_PL011_SERIAL)
pl01x_type = TYPE_PL011;
- clock = CONFIG_PL011_CLOCK;
+ clock = CFG_PL011_CLOCK;
#endif
base_regs = (struct pl01x_regs *)port[CONFIG_CONS_INDEX];
@@ -343,8 +343,8 @@
{}
};
-#ifndef CONFIG_PL011_CLOCK
-#define CONFIG_PL011_CLOCK 0
+#ifndef CFG_PL011_CLOCK
+#define CFG_PL011_CLOCK 0
#endif
int pl01x_serial_of_to_plat(struct udevice *dev)
@@ -359,7 +359,7 @@
return -EINVAL;
plat->base = addr;
- plat->clock = dev_read_u32_default(dev, "clock", CONFIG_PL011_CLOCK);
+ plat->clock = dev_read_u32_default(dev, "clock", CFG_PL011_CLOCK);
ret = clk_get_by_index(dev, 0, &clk);
if (!ret) {
ret = clk_enable(&clk);
diff --git a/include/configs/corstone1000.h b/include/configs/corstone1000.h
index 8aec52d..3347c11 100644
--- a/include/configs/corstone1000.h
+++ b/include/configs/corstone1000.h
@@ -16,7 +16,7 @@
#define V2M_BASE 0x80000000
-#define CONFIG_PL011_CLOCK 50000000
+#define CFG_PL011_CLOCK 50000000
/* Physical Memory Map */
#define PHYS_SDRAM_1 (V2M_BASE)
diff --git a/include/configs/highbank.h b/include/configs/highbank.h
index 76e6054..97bb439 100644
--- a/include/configs/highbank.h
+++ b/include/configs/highbank.h
@@ -8,7 +8,7 @@
#define CFG_SYS_BOOTMAPSZ (16 << 20)
-#define CONFIG_PL011_CLOCK 150000000
+#define CFG_PL011_CLOCK 150000000
/*
* Miscellaneous configurable options
diff --git a/include/configs/lx2160a_common.h b/include/configs/lx2160a_common.h
index c1a98fd..f8a20ea 100644
--- a/include/configs/lx2160a_common.h
+++ b/include/configs/lx2160a_common.h
@@ -39,7 +39,7 @@
/* Serial Port */
-#define CONFIG_PL011_CLOCK (get_bus_freq(0) / 4)
+#define CFG_PL011_CLOCK (get_bus_freq(0) / 4)
#define CFG_SYS_SERIAL0 0x21c0000
#define CFG_SYS_SERIAL1 0x21d0000
#define CFG_SYS_SERIAL2 0x21e0000
diff --git a/include/configs/mxs.h b/include/configs/mxs.h
index 32e0e06..90cb1a5 100644
--- a/include/configs/mxs.h
+++ b/include/configs/mxs.h
@@ -77,7 +77,7 @@
* DUART Serial Driver.
* Conflicts with AUART driver which can be set by board.
*/
-#define CONFIG_PL011_CLOCK 24000000
+#define CFG_PL011_CLOCK 24000000
#define CONFIG_PL01x_PORTS { (void *)MXS_UARTDBG_BASE }
/* Default baudrate can be overridden by board! */
diff --git a/include/configs/s5p4418_nanopi2.h b/include/configs/s5p4418_nanopi2.h
index bfe559f..0e7d019 100644
--- a/include/configs/s5p4418_nanopi2.h
+++ b/include/configs/s5p4418_nanopi2.h
@@ -76,7 +76,7 @@
/*-----------------------------------------------------------------------
* serial console configuration
*/
-#define CONFIG_PL011_CLOCK 50000000
+#define CFG_PL011_CLOCK 50000000
#define CONFIG_PL01x_PORTS {(void *)PHY_BASEADDR_UART0, \
(void *)PHY_BASEADDR_UART1, \
(void *)PHY_BASEADDR_UART2, \
diff --git a/include/configs/synquacer.h b/include/configs/synquacer.h
index e65d623..350cc69 100644
--- a/include/configs/synquacer.h
+++ b/include/configs/synquacer.h
@@ -31,7 +31,7 @@
/* Serial (pl011) */
#define UART_CLK (62500000)
-#define CONFIG_PL011_CLOCK UART_CLK
+#define CFG_PL011_CLOCK UART_CLK
#define CONFIG_PL01x_PORTS {(void *)(0x2a400000)}
/* Support MTD */
diff --git a/include/configs/thunderx_88xx.h b/include/configs/thunderx_88xx.h
index 8ba4054..2bca86b 100644
--- a/include/configs/thunderx_88xx.h
+++ b/include/configs/thunderx_88xx.h
@@ -17,7 +17,7 @@
/* PL011 Serial Configuration */
-#define CONFIG_PL011_CLOCK 24000000
+#define CFG_PL011_CLOCK 24000000
/* Generic Interrupt Controller Definitions */
#define GICD_BASE (0x801000000000)
diff --git a/include/configs/total_compute.h b/include/configs/total_compute.h
index e007be8..436bf62 100644
--- a/include/configs/total_compute.h
+++ b/include/configs/total_compute.h
@@ -14,7 +14,7 @@
#define UART0_BASE 0x7ff80000
/* PL011 Serial Configuration */
-#define CONFIG_PL011_CLOCK 7372800
+#define CFG_PL011_CLOCK 7372800
/* Miscellaneous configurable options */
diff --git a/include/configs/vexpress_aemv8.h b/include/configs/vexpress_aemv8.h
index 87b8c5d..43f7e45 100644
--- a/include/configs/vexpress_aemv8.h
+++ b/include/configs/vexpress_aemv8.h
@@ -86,9 +86,9 @@
/* PL011 Serial Configuration */
#ifdef CONFIG_TARGET_VEXPRESS64_JUNO
-#define CONFIG_PL011_CLOCK 7372800
+#define CFG_PL011_CLOCK 7372800
#else
-#define CONFIG_PL011_CLOCK 24000000
+#define CFG_PL011_CLOCK 24000000
#endif
/* Physical Memory Map */
diff --git a/include/configs/vexpress_common.h b/include/configs/vexpress_common.h
index 705a941..3fc70de 100644
--- a/include/configs/vexpress_common.h
+++ b/include/configs/vexpress_common.h
@@ -116,7 +116,7 @@
#define CFG_SYS_TIMER_COUNTER (V2M_TIMER01 + 0x4)
/* PL011 Serial Configuration */
-#define CONFIG_PL011_CLOCK 24000000
+#define CFG_PL011_CLOCK 24000000
#define CONFIG_PL01x_PORTS {(void *)CFG_SYS_SERIAL0, \
(void *)CFG_SYS_SERIAL1}