ARM: DRA7: Enable software leveling for dra7
Currently hw leveling is enabled by default on DRA7/72.
But the hardware team suggested to use sw leveling as hw leveling
is not characterized and seen some test case failures.
So enabling sw leveling on all DRA7 platforms.
Signed-off-by: Sricharan R <r.sricharan@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
diff --git a/arch/arm/cpu/armv7/omap5/sdram.c b/arch/arm/cpu/armv7/omap5/sdram.c
index e2ebab8..9105121 100644
--- a/arch/arm/cpu/armv7/omap5/sdram.c
+++ b/arch/arm/cpu/armv7/omap5/sdram.c
@@ -145,18 +145,18 @@
.sdram_tim1 = 0xCCCF36B3,
.sdram_tim2 = 0x308F7FDA,
.sdram_tim3 = 0x027F88A8,
- .read_idle_ctrl = 0x00050000,
+ .read_idle_ctrl = 0x00050001,
.zq_config = 0x0007190B,
.temp_alert_config = 0x00000000,
- .emif_ddr_phy_ctlr_1_init = 0x0024400A,
- .emif_ddr_phy_ctlr_1 = 0x0024400A,
+ .emif_ddr_phy_ctlr_1_init = 0x0E24400A,
+ .emif_ddr_phy_ctlr_1 = 0x0E24400A,
.emif_ddr_ext_phy_ctrl_1 = 0x10040100,
- .emif_ddr_ext_phy_ctrl_2 = 0x00B000B0,
- .emif_ddr_ext_phy_ctrl_3 = 0x00B000B0,
- .emif_ddr_ext_phy_ctrl_4 = 0x00B000B0,
- .emif_ddr_ext_phy_ctrl_5 = 0x00B000B0,
+ .emif_ddr_ext_phy_ctrl_2 = 0x00BB00BB,
+ .emif_ddr_ext_phy_ctrl_3 = 0x00BB00BB,
+ .emif_ddr_ext_phy_ctrl_4 = 0x00BB00BB,
+ .emif_ddr_ext_phy_ctrl_5 = 0x00BB00BB,
.emif_rd_wr_lvl_rmp_win = 0x00000000,
- .emif_rd_wr_lvl_rmp_ctl = 0x80000000,
+ .emif_rd_wr_lvl_rmp_ctl = 0x00000000,
.emif_rd_wr_lvl_ctl = 0x00000000,
.emif_rd_wr_exec_thresh = 0x00000305
};
@@ -169,18 +169,18 @@
.sdram_tim1 = 0xCCCF36B3,
.sdram_tim2 = 0x308F7FDA,
.sdram_tim3 = 0x027F88A8,
- .read_idle_ctrl = 0x00050000,
+ .read_idle_ctrl = 0x00050001,
.zq_config = 0x0007190B,
.temp_alert_config = 0x00000000,
- .emif_ddr_phy_ctlr_1_init = 0x0024400A,
- .emif_ddr_phy_ctlr_1 = 0x0024400A,
+ .emif_ddr_phy_ctlr_1_init = 0x0E24400A,
+ .emif_ddr_phy_ctlr_1 = 0x0E24400A,
.emif_ddr_ext_phy_ctrl_1 = 0x10040100,
- .emif_ddr_ext_phy_ctrl_2 = 0x00B000B0,
- .emif_ddr_ext_phy_ctrl_3 = 0x00B000B0,
- .emif_ddr_ext_phy_ctrl_4 = 0x00B000B0,
- .emif_ddr_ext_phy_ctrl_5 = 0x00B000B0,
+ .emif_ddr_ext_phy_ctrl_2 = 0x00BB00BB,
+ .emif_ddr_ext_phy_ctrl_3 = 0x00BB00BB,
+ .emif_ddr_ext_phy_ctrl_4 = 0x00BB00BB,
+ .emif_ddr_ext_phy_ctrl_5 = 0x00BB00BB,
.emif_rd_wr_lvl_rmp_win = 0x00000000,
- .emif_rd_wr_lvl_rmp_ctl = 0x80000000,
+ .emif_rd_wr_lvl_rmp_ctl = 0x00000000,
.emif_rd_wr_lvl_ctl = 0x00000000,
.emif_rd_wr_exec_thresh = 0x00000305
};
@@ -394,24 +394,24 @@
const u32
dra_ddr3_ext_phy_ctrl_const_base_es1_emif1[] = {
- 0x00B000B0,
- 0x00400040,
- 0x00400040,
- 0x00400040,
- 0x00400040,
- 0x00400040,
- 0x00800080,
- 0x00800080,
- 0x00800080,
- 0x00800080,
- 0x00800080,
+ 0x00BB00BB,
+ 0x00440044,
+ 0x00440044,
+ 0x00440044,
+ 0x00440044,
+ 0x00440044,
+ 0x007F007F,
+ 0x007F007F,
+ 0x007F007F,
+ 0x007F007F,
+ 0x007F007F,
0x00600060,
0x00600060,
0x00600060,
0x00600060,
0x00600060,
- 0x00800080,
- 0x00800080,
+ 0x00000000,
+ 0x00600020,
0x40010080,
0x08102040,
0x0,
@@ -439,7 +439,7 @@
0x00600060,
0x00600060,
0x00600060,
- 0x0,
+ 0x00000000,
0x00600020,
0x40010080,
0x08102040,