arm: kirkwood: add ZyXEL NSA310S device
This patch add ZyXEL NSA310S 1-Bay Media Server
The ZyXEL NSA310S device is a Kirkwood based NAS:
- SoC: Marvell 88F6702 1000Mhz
- SDRAM memory: 256MB DDR2 400Mhz
- Gigabit ethernet: PHY Marvell 88E1318
- Flash memory: 128MB
- 1 Power button
- 1 Power LED (blue)
- 4 Status LED (green)
- 1 Copy/Sync button
- 1 Reset button
- 1 SATA II port
- 2 USB 2.0 ports (front and back)
- Smart fan
Signed-off-by: Gerald Kerma <dreagle@doukki.net>
Signed-off-by: Tony Dinh <mibodhi@gmail.com>
Signed-off-by: Luka Perkov <luka.perkov@sartura.hr>
diff --git a/include/configs/nsa310s.h b/include/configs/nsa310s.h
new file mode 100644
index 0000000..4510b16
--- /dev/null
+++ b/include/configs/nsa310s.h
@@ -0,0 +1,99 @@
+/*
+ * Copyright (C) 2015
+ * Gerald Kerma <dreagle@doukki.net>
+ * Tony Dinh <mibodhi@gmail.com>
+ * Luka Perkov <luka.perkov@sartura.hr>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _CONFIG_NSA310S_H
+#define _CONFIG_NSA310S_H
+
+/* high level configuration options */
+#define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */
+#define CONFIG_KW88F6192 1 /* SOC Name */
+#define CONFIG_KW88F6702 1 /* SOC Name */
+#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
+
+/* add target to build it automatically upon "make" */
+#define CONFIG_BUILD_TARGET "u-boot.kwb"
+
+/* compression configuration */
+#define CONFIG_BZIP2
+#define CONFIG_LZMA
+
+/* commands configuration */
+#define CONFIG_SYS_NO_FLASH /* declare no flash (NOR/SPI) */
+#define CONFIG_SYS_MVFS
+#define CONFIG_CMD_BOOTZ
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_MII
+
+/*
+ * mv-common.h should be defined after CMD configs since it used them
+ * to enable certain macros
+ */
+#include "mv-common.h"
+
+/* environment variables configuration */
+#ifdef CONFIG_CMD_NAND
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_SECT_SIZE 0x20000
+#else
+#define CONFIG_ENV_IS_NOWHERE
+#endif
+#define CONFIG_ENV_SIZE 0x20000
+#define CONFIG_ENV_OFFSET 0xe0000
+
+/* default environment variables */
+#define CONFIG_BOOTCOMMAND \
+ "setenv bootargs ${console} ${mtdparts} ${bootargs_root}; " \
+ "ubi part root; " \
+ "ubifsmount ubi:rootfs; " \
+ "ubifsload 0x800000 ${kernel}; " \
+ "ubifsload 0x700000 ${fdt}; " \
+ "ubifsumount; " \
+ "fdt addr 0x700000; fdt resize; fdt chosen; " \
+ "bootz 0x800000 - 0x700000"
+
+#define CONFIG_MTDPARTS \
+ "mtdparts=orion_nand:" \
+ "0xe0000@0x0(uboot)," \
+ "0x20000@0xe0000(uboot_env)," \
+ "0x100000@0x100000(second_stage_uboot)," \
+ "-@0x200000(root)\0"
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "console=console=ttyS0,115200\0" \
+ "mtdids=nand0=orion_nand\0" \
+ "mtdparts="CONFIG_MTDPARTS \
+ "kernel=/boot/zImage\0" \
+ "fdt=/boot/nsa310s.dtb\0" \
+ "bootargs_root=ubi.mtd=3 root=ubi0:rootfs rootfstype=ubifs rw\0"
+
+/* Ethernet driver configuration */
+#ifdef CONFIG_CMD_NET
+#define CONFIG_NETCONSOLE
+#define CONFIG_NET_MULTI
+#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
+#define CONFIG_PHY_BASE_ADR 1
+#define CONFIG_PHY_GIGE
+#define CONFIG_RESET_PHY_R
+#endif /* CONFIG_CMD_NET */
+
+/* SATA driver configuration */
+#ifdef CONFIG_CMD_IDE
+#define __io
+#define CONFIG_IDE_PREINIT
+#define CONFIG_DOS_PARTITION
+#define CONFIG_MVSATA_IDE_USE_PORT0
+#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
+#endif /* CONFIG_CMD_IDE */
+
+/* RTC driver configuration */
+#ifdef CONFIG_CMD_DATE
+#define CONFIG_RTC_MV
+#endif /* CONFIG_CMD_DATE */
+
+#endif /* _CONFIG_NSA310S_H */