Merge branch 'u-boot/master' into 'u-boot-arm/master'
Conflicts:
arch/arm/cpu/armv7/rmobile/Makefile
doc/README.scrapyard
Needed manual fix:
arch/arm/cpu/armv7/omap-common/Makefile
board/compulab/cm_t335/u-boot.lds
diff --git a/board/compulab/cm_t335/u-boot.lds b/board/compulab/cm_t335/u-boot.lds
index 3bd96e9..1b609a2 100644
--- a/board/compulab/cm_t335/u-boot.lds
+++ b/board/compulab/cm_t335/u-boot.lds
@@ -19,7 +19,7 @@
{
*(.__image_copy_start)
CPUDIR/start.o (.text*)
- board/compulab/cm_t335/libcm_t335.o (.text*)
+ board/compulab/cm_t335/built-in.o (.text*)
*(.text*)
}
diff --git a/board/compulab/cm_t35/cm_t35.c b/board/compulab/cm_t35/cm_t35.c
index b9a99659..bc8e0ca 100644
--- a/board/compulab/cm_t35/cm_t35.c
+++ b/board/compulab/cm_t35/cm_t35.c
@@ -268,6 +268,9 @@
/* DVI enable */
MUX_VAL(CP(GPMC_NCS3), (IDIS | PTU | DIS | M4));/*GPMC_nCS3*/
+ /* DataImage backlight */
+ MUX_VAL(CP(GPMC_NCS7), (IDIS | PTU | DIS | M4));/*GPIO_58*/
+
/* CM-T3x Ethernet */
MUX_VAL(CP(GPMC_NCS5), (IDIS | PTU | DIS | M0)); /*GPMC_nCS5*/
MUX_VAL(CP(GPMC_CLK), (IEN | PTD | DIS | M4)); /*GPIO_59*/
@@ -374,6 +377,15 @@
MUX_VAL(CP(MMC1_DAT1), (IEN | PTU | EN | M0)); /*MMC1_DAT1*/
MUX_VAL(CP(MMC1_DAT2), (IEN | PTU | EN | M0)); /*MMC1_DAT2*/
MUX_VAL(CP(MMC1_DAT3), (IEN | PTU | EN | M0)); /*MMC1_DAT3*/
+
+ /* SPI */
+ MUX_VAL(CP(MCBSP1_CLKR), (IEN | PTD | DIS | M1)); /*MCSPI4_CLK*/
+ MUX_VAL(CP(MCBSP1_DX), (IEN | PTD | DIS | M1)); /*MCSPI4_SIMO*/
+ MUX_VAL(CP(MCBSP1_DR), (IEN | PTD | DIS | M1)); /*MCSPI4_SOMI*/
+ MUX_VAL(CP(MCBSP1_FSX), (IEN | PTU | EN | M1)); /*MCSPI4_CS0*/
+
+ /* display controls */
+ MUX_VAL(CP(MCBSP1_FSR), (IDIS | PTU | DIS | M4)); /*GPIO_157*/
}
static void cm_t35_set_muxconf(void)
@@ -470,7 +482,7 @@
&ctrl_base->gpmc_nadv_ale);
}
-#ifdef CONFIG_DRIVER_OMAP34XX_I2C
+#ifdef CONFIG_SYS_I2C_OMAP34XX
/*
* Routine: reset_net_chip
* Description: reset the Ethernet controller via TPS65930 GPIO
diff --git a/board/compulab/common/Makefile b/board/compulab/common/Makefile
index 831be2e..6d7d068 100644
--- a/board/compulab/common/Makefile
+++ b/board/compulab/common/Makefile
@@ -6,5 +6,5 @@
# SPDX-License-Identifier: GPL-2.0+
#
-obj-$(CONFIG_DRIVER_OMAP34XX_I2C) += eeprom.o
+obj-$(CONFIG_SYS_I2C_OMAP34XX) += eeprom.o
obj-$(CONFIG_LCD) += omap3_display.o
diff --git a/board/compulab/common/eeprom.h b/board/compulab/common/eeprom.h
index cf8c302..e871629 100644
--- a/board/compulab/common/eeprom.h
+++ b/board/compulab/common/eeprom.h
@@ -10,7 +10,7 @@
#ifndef _EEPROM_
#define _EEPROM_
-#ifdef CONFIG_DRIVER_OMAP34XX_I2C
+#ifdef CONFIG_SYS_I2C_OMAP34XX
int cl_eeprom_read_mac_addr(uchar *buf);
u32 cl_eeprom_get_board_rev(void);
#else
diff --git a/board/compulab/common/omap3_display.c b/board/compulab/common/omap3_display.c
index ead821e..61707f5 100644
--- a/board/compulab/common/omap3_display.c
+++ b/board/compulab/common/omap3_display.c
@@ -14,6 +14,7 @@
#include <stdio_dev.h>
#include <asm/arch/dss.h>
#include <lcd.h>
+#include <scf0403_lcd.h>
#include <asm/arch-omap3/dss.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -22,6 +23,7 @@
NONE,
DVI,
DVI_CUSTOM,
+ DATA_IMAGE, /* #define CONFIG_SCF0403_LCD to use */
};
#define CMAP_ADDR 0x80100000
@@ -119,6 +121,18 @@
.gfx_format = GFXFORMAT_RGB16,
};
+static const struct panel_config preset_dataimage_480X800 = {
+ .lcd_size = PANEL_LCD_SIZE(480, 800),
+ .timing_h = DSS_HBP(2) | DSS_HFP(2) | DSS_HSW(2),
+ .timing_v = DSS_VBP(17) | DSS_VFP(20) | DSS_VSW(3),
+ .pol_freq = DSS_IVS | DSS_IHS | DSS_IPC | DSS_ONOFF,
+ .divisor = 10 | (1 << 10),
+ .data_lines = LCD_INTERFACE_18_BIT,
+ .panel_type = ACTIVE_DISPLAY,
+ .load_mode = 2,
+ .gfx_format = GFXFORMAT_RGB16,
+};
+
/*
* set_resolution_params()
*
@@ -146,6 +160,13 @@
return DVI;
}
+static enum display_type set_dataimage_preset(const struct panel_config preset,
+ int x_res, int y_res)
+{
+ set_preset(preset, x_res, y_res);
+ return DATA_IMAGE;
+}
+
/*
* parse_mode() - parse the mode parameter of custom lcd settings
*
@@ -369,6 +390,8 @@
return set_dvi_preset(preset_dvi_1280X960, 1280, 960);
else if (!strncmp(displaytype, "dvi1280x1024", 12))
return set_dvi_preset(preset_dvi_1280X1024, 1280, 1024);
+ else if (!strncmp(displaytype, "dataimage480x800", 16))
+ return set_dataimage_preset(preset_dataimage_480X800, 480, 800);
return NONE;
}
@@ -401,12 +424,31 @@
clrsetbits_le32(&prcm->clksel_dss, 0xF, 3);
}
+#ifdef CONFIG_SCF0403_LCD
+static void scf0403_enable(void)
+{
+ gpio_direction_output(58, 1);
+ scf0403_init(157);
+}
+#else
+static inline void scf0403_enable(void) {}
+#endif
+
void lcd_enable(void)
{
- if (lcd_def == DVI || lcd_def == DVI_CUSTOM) {
+ switch (lcd_def) {
+ case NONE:
+ return;
+ case DVI:
+ case DVI_CUSTOM:
gpio_direction_output(54, 0); /* Turn on DVI */
- omap3_dss_enable();
+ break;
+ case DATA_IMAGE:
+ scf0403_enable();
+ break;
}
+
+ omap3_dss_enable();
}
void lcd_setcolreg(ushort regno, ushort red, ushort green, ushort blue) {}
diff --git a/board/compulab/trimslice/Makefile b/board/compulab/trimslice/Makefile
index 0818673..f3bd00d 100644
--- a/board/compulab/trimslice/Makefile
+++ b/board/compulab/trimslice/Makefile
@@ -5,8 +5,6 @@
# SPDX-License-Identifier: GPL-2.0+
#
-$(shell mkdir -p $(obj)../../nvidia/common)
-
obj-y := trimslice.o
include ../../nvidia/common/common.mk