ARM: DRA7: Set serial number environment variable
This patch populates serial number environment variable from
die_id_0 and die_id_1 register values for DRA7xx boards.
The function is added in omap common code so that this can be re-used.
Serial# environment variable will be useful to show correct
information in "fastboot devices" commands.
Ref:
http://git.omapzoom.org/?p=repo/u-boot.git;a=commit;h=a6bcaaf67f6e4bcd97808f53d0ceb4b0c04d583c
Signed-off-by: Angela Stegmaier <angelabaker@ti.com>
Signed-off-by: Dileep Katta <dileep.katta@linaro.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
diff --git a/arch/arm/cpu/armv7/omap-common/utils.c b/arch/arm/cpu/armv7/omap-common/utils.c
index 1696c2d..df5f817 100644
--- a/arch/arm/cpu/armv7/omap-common/utils.c
+++ b/arch/arm/cpu/armv7/omap-common/utils.c
@@ -60,3 +60,16 @@
eth_setenv_enetaddr("usbethaddr", device_mac);
}
}
+
+void __weak usb_set_serial_num_from_die_id(u32 *id)
+{
+ char serialno[72];
+ uint32_t serialno_lo, serialno_hi;
+
+ if (!getenv("serial#")) {
+ serialno_hi = id[0];
+ serialno_lo = id[1];
+ sprintf(serialno, "%08x%08x", serialno_hi, serialno_lo);
+ setenv("serial#", serialno);
+ }
+}
diff --git a/arch/arm/cpu/armv7/omap5/prcm-regs.c b/arch/arm/cpu/armv7/omap5/prcm-regs.c
index 440bb40..f80d36d 100644
--- a/arch/arm/cpu/armv7/omap5/prcm-regs.c
+++ b/arch/arm/cpu/armv7/omap5/prcm-regs.c
@@ -440,6 +440,10 @@
.control_emif1_sdram_config_ext = 0x4AE0C144,
.control_emif2_sdram_config_ext = 0x4AE0C148,
.control_wkup_ldovbb_mpu_voltage_ctrl = 0x4AE0C158,
+ .control_std_fuse_die_id_0 = 0x4AE0C200,
+ .control_std_fuse_die_id_1 = 0x4AE0C208,
+ .control_std_fuse_die_id_2 = 0x4AE0C20C,
+ .control_std_fuse_die_id_3 = 0x4AE0C210,
.control_padconf_mode = 0x4AE0C5A0,
.control_xtal_oscillator = 0x4AE0C5A4,
.control_i2c_2 = 0x4AE0C5A8,
diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h
index c8c3e71..b0296fb 100644
--- a/arch/arm/include/asm/omap_common.h
+++ b/arch/arm/include/asm/omap_common.h
@@ -362,6 +362,10 @@
u32 control_core_control_io1;
u32 control_core_control_io2;
u32 control_id_code;
+ u32 control_std_fuse_die_id_0;
+ u32 control_std_fuse_die_id_1;
+ u32 control_std_fuse_die_id_2;
+ u32 control_std_fuse_die_id_3;
u32 control_std_fuse_opp_bgap;
u32 control_ldosram_iva_voltage_ctrl;
u32 control_ldosram_mpu_voltage_ctrl;
@@ -578,6 +582,7 @@
s8 abb_setup_ldovbb(u32 fuse, u32 ldovbb);
void usb_fake_mac_from_die_id(u32 *id);
+void usb_set_serial_num_from_die_id(u32 *id);
void omap_smc1(u32 service, u32 val);
diff --git a/board/ti/dra7xx/evm.c b/board/ti/dra7xx/evm.c
index c101928..d464855 100644
--- a/board/ti/dra7xx/evm.c
+++ b/board/ti/dra7xx/evm.c
@@ -93,10 +93,16 @@
int board_late_init(void)
{
#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
+ u32 id[4];
+
if (omap_revision() == DRA722_ES1_0)
setenv("board_name", "dra72x");
else
setenv("board_name", "dra7xx");
+
+ id[0] = readl((*ctrl)->control_std_fuse_die_id_0);
+ id[1] = readl((*ctrl)->control_std_fuse_die_id_1);
+ usb_set_serial_num_from_die_id(id);
#endif
return 0;
}