ddr: altera: Clean up rw_mgr_mem_calibrate_vfifo_center() part 4
First of all, don't break strings in the debug_cond() calls across
multiple lines. Next, zap a couple of really odd casts in the code.
Finally, make i into a signed variable, so it is possible to avoid
constructs of the form:
for (i = FOO;; i--) { <code>; if (i == 0) break; }.
Signed-off-by: Marek Vasut <marex@denx.de>
diff --git a/drivers/ddr/altera/sequencer.c b/drivers/ddr/altera/sequencer.c
index 2ecf6b8..3db226d 100644
--- a/drivers/ddr/altera/sequencer.c
+++ b/drivers/ddr/altera/sequencer.c
@@ -2078,7 +2078,8 @@
uint32_t write_group, uint32_t read_group, uint32_t test_bgn,
uint32_t use_read_test, uint32_t update_fom)
{
- uint32_t i, p, min_index;
+ uint32_t p, min_index;
+ int i;
/*
* Store these as signed since there are comparisons with
* signed numbers.
@@ -2118,6 +2119,7 @@
&bit_chk, &sticky_bit_chk,
left_edge, right_edge, use_read_test);
+
/* Search for the right edge of the window for each bit */
ret = search_right_edge(0, rank_bgn, write_group, read_group,
start_dqs, start_dqs_en,
@@ -2198,8 +2200,9 @@
}
new_dqs = start_dqs - mid_min;
- debug_cond(DLEVEL == 1, "vfifo_center: start_dqs=%d start_dqs_en=%d \
- new_dqs=%d mid_min=%d\n", start_dqs,
+ debug_cond(DLEVEL == 1,
+ "vfifo_center: start_dqs=%d start_dqs_en=%d new_dqs=%d mid_min=%d\n",
+ start_dqs,
IO_SHIFT_DQS_EN_WHEN_SHIFT_DQS ? start_dqs_en : -1,
new_dqs, mid_min);
@@ -2214,28 +2217,31 @@
(left_edge[min_index] - right_edge[min_index]))/2 +
(orig_mid_min - mid_min);
- debug_cond(DLEVEL == 2, "vfifo_center: before: \
- shift_dq[%u]=%d\n", i, shift_dq);
+ debug_cond(DLEVEL == 2,
+ "vfifo_center: before: shift_dq[%u]=%d\n",
+ i, shift_dq);
addr = SDR_PHYGRP_SCCGRP_ADDRESS | SCC_MGR_IO_IN_DELAY_OFFSET;
temp_dq_in_delay1 = readl(addr + (p << 2));
temp_dq_in_delay2 = readl(addr + (i << 2));
- if (shift_dq + (int32_t)temp_dq_in_delay1 >
- (int32_t)IO_IO_IN_DELAY_MAX) {
- shift_dq = (int32_t)IO_IO_IN_DELAY_MAX - temp_dq_in_delay2;
- } else if (shift_dq + (int32_t)temp_dq_in_delay1 < 0) {
- shift_dq = -(int32_t)temp_dq_in_delay1;
- }
- debug_cond(DLEVEL == 2, "vfifo_center: after: \
- shift_dq[%u]=%d\n", i, shift_dq);
+ if (shift_dq + temp_dq_in_delay1 > IO_IO_IN_DELAY_MAX)
+ shift_dq = IO_IO_IN_DELAY_MAX - temp_dq_in_delay2;
+ else if (shift_dq + temp_dq_in_delay1 < 0)
+ shift_dq = -temp_dq_in_delay1;
+
+ debug_cond(DLEVEL == 2,
+ "vfifo_center: after: shift_dq[%u]=%d\n",
+ i, shift_dq);
final_dq[i] = temp_dq_in_delay1 + shift_dq;
scc_mgr_set_dq_in_delay(p, final_dq[i]);
scc_mgr_load_dq(p);
- debug_cond(DLEVEL == 2, "vfifo_center: margin[%u]=[%d,%d]\n", i,
+ debug_cond(DLEVEL == 2,
+ "vfifo_center: margin[%u]=[%d,%d]\n", i,
left_edge[i] - shift_dq + (-mid_min),
right_edge[i] + shift_dq - (-mid_min));
+
/* To determine values for export structures */
if (left_edge[i] - shift_dq + (-mid_min) < dq_margin)
dq_margin = left_edge[i] - shift_dq + (-mid_min);
@@ -2257,9 +2263,9 @@
/* Move DQS */
scc_mgr_set_dqs_bus_in_delay(read_group, final_dqs);
scc_mgr_load_dqs(read_group);
- debug_cond(DLEVEL == 2, "%s:%d vfifo_center: dq_margin=%d \
- dqs_margin=%d", __func__, __LINE__,
- dq_margin, dqs_margin);
+ debug_cond(DLEVEL == 2,
+ "%s:%d vfifo_center: dq_margin=%d dqs_margin=%d",
+ __func__, __LINE__, dq_margin, dqs_margin);
/*
* Do not remove this line as it makes sure all of our decisions