mx23_olinuxino: Enable USB support
This enabled USB support for the mx23_olinuxino board.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
diff --git a/board/olimex/mx23_olinuxino/mx23_olinuxino.c b/board/olimex/mx23_olinuxino/mx23_olinuxino.c
index 2501417..9252717 100644
--- a/board/olimex/mx23_olinuxino/mx23_olinuxino.c
+++ b/board/olimex/mx23_olinuxino/mx23_olinuxino.c
@@ -45,6 +45,11 @@
/* SSP0 clock at 96MHz */
mxs_set_sspclk(MXC_SSPCLK0, 96000, 0);
+#ifdef CONFIG_CMD_USB
+ /* Enable LAN9512 */
+ gpio_direction_output(MX23_PAD_GPMI_ALE__GPIO_0_17, 1);
+#endif
+
return 0;
}
diff --git a/board/olimex/mx23_olinuxino/spl_boot.c b/board/olimex/mx23_olinuxino/spl_boot.c
index 3bbf5ad..a96c293 100644
--- a/board/olimex/mx23_olinuxino/spl_boot.c
+++ b/board/olimex/mx23_olinuxino/spl_boot.c
@@ -95,6 +95,10 @@
MX23_PAD_SSP1_DATA2__SSP1_DATA2 | MUX_CONFIG_SSP,
MX23_PAD_SSP1_DATA3__SSP1_DATA3 | MUX_CONFIG_SSP,
MX23_PAD_SSP1_SCK__SSP1_SCK | MUX_CONFIG_SSP,
+
+ /* Ethernet */
+ MX23_PAD_GPMI_ALE__GPIO_0_17 |
+ (MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_NOPULL),
};
void board_init_ll(void)
diff --git a/include/configs/mx23_olinuxino.h b/include/configs/mx23_olinuxino.h
index d019944..90dda01 100644
--- a/include/configs/mx23_olinuxino.h
+++ b/include/configs/mx23_olinuxino.h
@@ -60,6 +60,7 @@
#define CONFIG_CMD_GPIO
#define CONFIG_CMD_LED
#define CONFIG_CMD_MMC
+#define CONFIG_CMD_USB
/*
* Memory configurations
@@ -140,6 +141,16 @@
*/
#define CONFIG_APBH_DMA
+/* USB */
+#ifdef CONFIG_CMD_USB
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_MXS
+#define CONFIG_EHCI_MXS_PORT0
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
+#define CONFIG_EHCI_IS_TDI
+#define CONFIG_USB_STORAGE
+#endif
+
/*
* Boot Linux
*/