arm/km: move CONFIG_EXTRA_ENV_SETTINGS from board to km_arm file

Since all the boards define the same env settings, this simplifies
the board files.

Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
cc: Holger Brunck <holger.brunck@keymile.com>
cc: Heiko Schocher <hs@denx.de>
cc: Wolfgang Denk <wd@denx.de>
cc: Detlev Zundel <dzu@denx.de>
cc: Prafulla Wadaskar <prafulla@marvell.com>
diff --git a/include/configs/km/km_arm.h b/include/configs/km/km_arm.h
index aa9f1ae..80a56dd 100644
--- a/include/configs/km/km_arm.h
+++ b/include/configs/km/km_arm.h
@@ -239,6 +239,21 @@
 		"sf write ${u-boot_addr_r} 0 ${filesize};"		\
 		"spi off\0"
 
+/*
+ * Default environment variables
+ */
+#define CONFIG_EXTRA_ENV_SETTINGS					\
+	CONFIG_KM_DEF_ENV						\
+	"newenv=setenv addr 0x100000 && "				\
+		"i2c dev 1; mw.b ${addr} 0 4 && "			\
+		"eeprom write " xstr(CONFIG_SYS_DEF_EEPROM_ADDR)	\
+		" ${addr} " xstr(CONFIG_ENV_OFFSET) " 4 && "		\
+		"eeprom write " xstr(CONFIG_SYS_DEF_EEPROM_ADDR)	\
+		" ${addr} " xstr(CONFIG_ENV_OFFSET_REDUND) " 4\0"	\
+	"rootpath=/opt/eldk/arm\0"					\
+	"EEprom_ivm=" KM_IVM_BUS "\0"					\
+	""
+
 #if defined(CONFIG_SYS_NO_FLASH)
 #define CONFIG_KM_UBI_PARTITION_NAME   "ubi0"
 #undef	CONFIG_FLASH_CFI_MTD
diff --git a/include/configs/mgcoge2un.h b/include/configs/mgcoge2un.h
index 6256035..4e2a774 100644
--- a/include/configs/mgcoge2un.h
+++ b/include/configs/mgcoge2un.h
@@ -47,19 +47,4 @@
 #define KM_IVM_BUS	"pca9547:70:9" /* I2C2 (Mux-Port 1)*/
 #define KM_ENV_BUS	"pca9547:70:d" /* I2C2 (Mux-Port 5)*/
 
-/*
- * Default environment variables
- */
-#define CONFIG_EXTRA_ENV_SETTINGS					\
-	CONFIG_KM_DEF_ENV						\
-	"newenv=setenv addr 0x100000 && "				\
-		"i2c dev 1; mw.b ${addr} 0 4 && "			\
-		"eeprom write " xstr(CONFIG_SYS_DEF_EEPROM_ADDR)	\
-		" ${addr} " xstr(CONFIG_ENV_OFFSET) " 4 && "		\
-		"eeprom write " xstr(CONFIG_SYS_DEF_EEPROM_ADDR)	\
-		" ${addr} " xstr(CONFIG_ENV_OFFSET_REDUND) " 4\0"	\
-	"rootpath=/opt/eldk/arm\0"					\
-	"EEprom_ivm=" KM_IVM_BUS "\0"					\
-	""
-
 #endif /* _CONFIG_MGCOGE2UN_H */
diff --git a/include/configs/suen3.h b/include/configs/suen3.h
index aa4d778..0f1b11e 100644
--- a/include/configs/suen3.h
+++ b/include/configs/suen3.h
@@ -46,19 +46,4 @@
 #define KM_IVM_BUS	"pca9544a:70:9"	/* I2C2 (Mux-Port 1)*/
 #define KM_ENV_BUS	"pca9544a:70:d"	/* I2C2 (Mux-Port 5)*/
 
-/*
- * Default environment variables
- */
-#define CONFIG_EXTRA_ENV_SETTINGS					\
-	CONFIG_KM_DEF_ENV						\
-	"newenv=setenv addr 0x100000 && "				\
-		"i2c dev 1; mw.b ${addr} 0 4 && "			\
-		"eeprom write " xstr(CONFIG_SYS_DEF_EEPROM_ADDR)	\
-		" ${addr} " xstr(CONFIG_ENV_OFFSET) " 4 && "		\
-		"eeprom write " xstr(CONFIG_SYS_DEF_EEPROM_ADDR)	\
-		" ${addr} " xstr(CONFIG_ENV_OFFSET_REDUND) " 4\0"	\
-	"rootpath=/opt/eldk/arm\0"					\
-	"EEprom_ivm=" KM_IVM_BUS "\0"					\
-	""
-
 #endif /* _CONFIG_SUEN3_H */
diff --git a/include/configs/suen8.h b/include/configs/suen8.h
index b680dfb..78cee75 100644
--- a/include/configs/suen8.h
+++ b/include/configs/suen8.h
@@ -47,19 +47,4 @@
 #define KM_IVM_BUS	"pca9544a:70:9" /* I2C2 (Mux-Port 1)*/
 #define KM_ENV_BUS	"pca9544a:70:d" /* I2C2 (Mux-Port 5)*/
 
-/*
- * Default environment variables
- */
-#define CONFIG_EXTRA_ENV_SETTINGS					\
-	CONFIG_KM_DEF_ENV						\
-	"newenv=setenv addr 0x100000 && "				\
-		"i2c dev 1; mw.b ${addr} 0 4 && "			\
-		"eeprom write " xstr(CONFIG_SYS_DEF_EEPROM_ADDR)	\
-		" ${addr} " xstr(CONFIG_ENV_OFFSET) " 4 && "		\
-		"eeprom write " xstr(CONFIG_SYS_DEF_EEPROM_ADDR)	\
-		" ${addr} " xstr(CONFIG_ENV_OFFSET_REDUND) " 4\0"	\
-	"rootpath=/opt/eldk/arm\0"					\
-	"EEprom_ivm=" KM_IVM_BUS "\0"					\
-	""
-
 #endif /* _CONFIG_SUEN8_H */