drivers/qe: add sgmii support in for UEC driver
Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
diff --git a/drivers/qe/uec.h b/drivers/qe/uec.h
index 6c408d1..1568310 100644
--- a/drivers/qe/uec.h
+++ b/drivers/qe/uec.h
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2006 Freescale Semiconductor, Inc.
+ * Copyright (C) 2006-2009 Freescale Semiconductor, Inc.
*
* Dave Liu <daveliu@freescale.com>
* based on source code of Shlomi Gridish
@@ -47,6 +47,7 @@
#define UPSMR_CAM 0x00000400 /* CAM Address Matching */
#define UPSMR_BRO 0x00000200 /* Broadcast Address */
#define UPSMR_RES1 0x00002000 /* Reserved feild - must be 1 */
+#define UPSMR_SGMM 0x00000020 /* SGMII mode */
#define UPSMR_INIT_VALUE (UPSMR_HSE | UPSMR_RES1)
@@ -621,6 +622,31 @@
ENET_TBI_MII_TBICON = 0x11
} enet_tbi_mii_reg_e;
+/* TBI MDIO register bit fields*/
+#define TBICON_CLK_SELECT 0x0020
+#define TBIANA_ASYMMETRIC_PAUSE 0x0100
+#define TBIANA_SYMMETRIC_PAUSE 0x0080
+#define TBIANA_HALF_DUPLEX 0x0040
+#define TBIANA_FULL_DUPLEX 0x0020
+#define TBICR_PHY_RESET 0x8000
+#define TBICR_ANEG_ENABLE 0x1000
+#define TBICR_RESTART_ANEG 0x0200
+#define TBICR_FULL_DUPLEX 0x0100
+#define TBICR_SPEED1_SET 0x0040
+
+#define TBIANA_SETTINGS ( \
+ TBIANA_ASYMMETRIC_PAUSE \
+ | TBIANA_SYMMETRIC_PAUSE \
+ | TBIANA_FULL_DUPLEX \
+ )
+
+#define TBICR_SETTINGS ( \
+ TBICR_PHY_RESET \
+ | TBICR_ANEG_ENABLE \
+ | TBICR_FULL_DUPLEX \
+ | TBICR_SPEED1_SET \
+ )
+
/* UEC number of threads
*/
typedef enum uec_num_of_threads {
@@ -645,7 +671,8 @@
ENET_1000_RGMII_ID,
ENET_1000_RGMII_RXID,
ENET_1000_TBI,
- ENET_1000_RTBI
+ ENET_1000_RTBI,
+ ENET_1000_SGMII
} enet_interface_e;
/* UEC initialization info struct