MTD/NAND: Fix printf format warning in nand code
This patch fixes NAND related printf format warning. Those warnings are
now visible since patch dc4b0b38d4aadf08826f6c31270f1eecd27964fd
[Fix printf errors.] by Andrew Klossner has been applied. Thanks, this is
really helpful.
Signed-off-by: Stefan Roese <sr@denx.de>
diff --git a/common/cmd_nand.c b/common/cmd_nand.c
index e20c1af..cc7c5ba 100644
--- a/common/cmd_nand.c
+++ b/common/cmd_nand.c
@@ -55,11 +55,11 @@
off &= ~(nand->oobblock - 1);
i = nand_read_raw(nand, buf, off, nand->oobblock, nand->oobsize);
if (i < 0) {
- printf("Error (%d) reading page %08x\n", i, off);
+ printf("Error (%d) reading page %08lx\n", i, off);
free(buf);
return 1;
}
- printf("Page %08x dump:\n", off);
+ printf("Page %08lx dump:\n", off);
i = nand->oobblock >> 4; p = buf;
while (i--) {
printf( "\t%02x %02x %02x %02x %02x %02x %02x %02x"
@@ -149,7 +149,7 @@
if (*size == nand->size)
puts("whole chip\n");
else
- printf("offset 0x%x, size 0x%x\n", *off, *size);
+ printf("offset 0x%lx, size 0x%x\n", *off, *size);
return 0;
}
@@ -181,7 +181,7 @@
putc('\n');
for (i = 0; i < CFG_MAX_NAND_DEVICE; i++) {
if (nand_info[i].name)
- printf("Device %d: %s, sector size %lu KiB\n",
+ printf("Device %d: %s, sector size %u KiB\n",
i, nand_info[i].name,
nand_info[i].erasesize >> 10);
}
@@ -238,7 +238,7 @@
printf("\nDevice %d bad blocks:\n", nand_curr_device);
for (off = 0; off < nand->size; off += nand->erasesize)
if (nand_block_isbad(nand, off))
- printf(" %08x\n", off);
+ printf(" %08lx\n", off);
return 0;
}
@@ -417,7 +417,7 @@
if (off == nand->size - nand->oobblock
|| (s != last_status && off != 0)) {
- printf("%08x - %08x: %8d pages %s%s%s\n",
+ printf("%08lx - %08lx: %8lu pages %s%s%s\n",
block_start,
off-1,
(off-block_start)/nand->oobblock,
diff --git a/drivers/mtd/nand/nand.c b/drivers/mtd/nand/nand.c
index 27b5792..e44470e 100644
--- a/drivers/mtd/nand/nand.c
+++ b/drivers/mtd/nand/nand.c
@@ -70,7 +70,7 @@
if (nand_curr_device == -1)
nand_curr_device = i;
}
- printf("%lu MiB\n", size / (1024 * 1024));
+ printf("%u MiB\n", size / (1024 * 1024));
#ifdef CFG_NAND_SELECT_DEVICE
/*
diff --git a/drivers/mtd/nand/nand_util.c b/drivers/mtd/nand/nand_util.c
index c82f77b..828cc33 100644
--- a/drivers/mtd/nand/nand_util.c
+++ b/drivers/mtd/nand/nand_util.c
@@ -154,7 +154,7 @@
}
if (erase_length < meminfo->erasesize) {
- printf("Warning: Erase size 0x%08x smaller than one " \
+ printf("Warning: Erase size 0x%08lx smaller than one " \
"erase block 0x%08x\n",erase_length, meminfo->erasesize);
printf(" Erasing 0x%08x instead\n", meminfo->erasesize);
erase_length = meminfo->erasesize;
@@ -498,7 +498,7 @@
* on (slow) serial consoles
*/
if (percent != percent_complete) {
- printf("\rWriting data at 0x%x "
+ printf("\rWriting data at 0x%lx "
"-- %3d%% complete.",
mtdoffset, percent);
percent_complete = percent;
@@ -678,7 +678,7 @@
*/
if (percent != percent_complete) {
if (!opts->quiet)
- printf("\rReading data from 0x%x "
+ printf("\rReading data from 0x%lx "
"-- %3d%% complete.",
mtdoffset, percent);
percent_complete = percent;