m68k: add mcf5307 cpu support
Add Freescale MCF5307 cpu support.
Signed-off-by: Angelo Dureghello <angelo@sysam.it>
diff --git a/arch/m68k/cpu/mcf530x/cpu_init.c b/arch/m68k/cpu/mcf530x/cpu_init.c
new file mode 100644
index 0000000..80dc239
--- /dev/null
+++ b/arch/m68k/cpu/mcf530x/cpu_init.c
@@ -0,0 +1,160 @@
+/*
+ * (C) Copyright 2014 Angelo Dureghello <angelo@sysam.it>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ *
+ */
+
+#include <common.h>
+#include <watchdog.h>
+#include <asm/immap.h>
+#include <asm/io.h>
+
+#if defined(CONFIG_M5307)
+/*
+ * Simple mcf5307 chip select module init.
+ *
+ * Note: this chip has an issue reported in the device "errata":
+ * MCF5307ER Rev 4.2 reports @ section 35:
+ * Corrupted Return PC in Exception Stack Frame
+ * When processing an autovectored interrupt an error can occur that
+ * causes 0xFFFFFFFF to be written as the return PC value in the
+ * exception stack frame. The problem is caused by a conflict between
+ * an internal autovector access and a chip select mapped to the IACK
+ * address space (0xFFFFXXXX).
+ * Workaround:
+ * Set the C/I bit in the chip select mask register (CSMR) for the
+ * chip select that is mapped to 0xFFFFXXXX.
+ * This will prevent the chip select from asserting for IACK accesses.
+ */
+
+#define MCF5307_SP_ERR_FIX(cs_base, mask) \
+ do { \
+ if (((cs_base<<16)+(in_be32(&mask)&0xffff0000)) >= \
+ 0xffff0000) \
+ setbits_be32(&mask, CSMR_CI); \
+ } while (0)
+
+void init_csm(void)
+{
+ csm_t *csm = (csm_t *)(MMAP_CSM);
+
+#if (defined(CONFIG_SYS_CS0_BASE) && defined(CONFIG_SYS_CS0_MASK) && \
+ defined(CONFIG_SYS_CS0_CTRL))
+ out_be16(&csm->csar0, CONFIG_SYS_CS0_BASE);
+ out_be32(&csm->csmr0, CONFIG_SYS_CS0_MASK);
+ out_be16(&csm->cscr0, CONFIG_SYS_CS0_CTRL);
+ MCF5307_SP_ERR_FIX(CONFIG_SYS_CS0_BASE, csm->csmr0);
+#else
+#warning "Chip Select 0 are not initialized/used"
+#endif
+#if (defined(CONFIG_SYS_CS1_BASE) && defined(CONFIG_SYS_CS1_MASK) && \
+ defined(CONFIG_SYS_CS1_CTRL))
+ out_be16(&csm->csar1, CONFIG_SYS_CS1_BASE);
+ out_be32(&csm->csmr1, CONFIG_SYS_CS1_MASK);
+ out_be16(&csm->cscr1, CONFIG_SYS_CS1_CTRL);
+ MCF5307_SP_ERR_FIX(CONFIG_SYS_CS1_BASE, csm->csmr1);
+#endif
+#if (defined(CONFIG_SYS_CS2_BASE) && defined(CONFIG_SYS_CS2_MASK) && \
+ defined(CONFIG_SYS_CS2_CTRL))
+ out_be16(&csm->csar2, CONFIG_SYS_CS2_BASE);
+ out_be32(&csm->csmr2, CONFIG_SYS_CS2_MASK);
+ out_be16(&csm->cscr2, CONFIG_SYS_CS2_CTRL);
+ MCF5307_SP_ERR_FIX(CONFIG_SYS_CS2_BASE, csm->csmr2);
+#endif
+#if (defined(CONFIG_SYS_CS3_BASE) && defined(CONFIG_SYS_CS3_MASK) && \
+ defined(CONFIG_SYS_CS3_CTRL))
+ out_be16(&csm->csar3, CONFIG_SYS_CS3_BASE);
+ out_be32(&csm->csmr3, CONFIG_SYS_CS3_MASK);
+ out_be16(&csm->cscr3, CONFIG_SYS_CS3_CTRL);
+ MCF5307_SP_ERR_FIX(CONFIG_SYS_CS3_BASE, csm->csmr3);
+#endif
+#if (defined(CONFIG_SYS_CS4_BASE) && defined(CONFIG_SYS_CS4_MASK) && \
+ defined(CONFIG_SYS_CS4_CTRL))
+ out_be16(&csm->csar4, CONFIG_SYS_CS4_BASE);
+ out_be32(&csm->csmr4, CONFIG_SYS_CS4_MASK);
+ out_be16(&csm->cscr4, CONFIG_SYS_CS4_CTRL);
+ MCF5307_SP_ERR_FIX(CONFIG_SYS_CS4_BASE, csm->csmr4);
+#endif
+#if (defined(CONFIG_SYS_CS5_BASE) && defined(CONFIG_SYS_CS5_MASK) && \
+ defined(CONFIG_SYS_CS5_CTRL))
+ out_be16(&csm->csar5, CONFIG_SYS_CS5_BASE);
+ out_be32(&csm->csmr5, CONFIG_SYS_CS5_MASK);
+ out_be16(&csm->cscr5, CONFIG_SYS_CS5_CTRL);
+ MCF5307_SP_ERR_FIX(CONFIG_SYS_CS5_BASE, csm->csmr5);
+#endif
+#if (defined(CONFIG_SYS_CS6_BASE) && defined(CONFIG_SYS_CS6_MASK) && \
+ defined(CONFIG_SYS_CS6_CTRL))
+ out_be16(&csm->csar6, CONFIG_SYS_CS6_BASE);
+ out_be32(&csm->csmr6, CONFIG_SYS_CS6_MASK);
+ out_be16(&csm->cscr6, CONFIG_SYS_CS6_CTRL);
+ MCF5307_SP_ERR_FIX(CONFIG_SYS_CS6_BASE, csm->csmr6);
+#endif
+#if (defined(CONFIG_SYS_CS7_BASE) && defined(CONFIG_SYS_CS7_MASK) && \
+ defined(CONFIG_SYS_CS7_CTRL))
+ out_be16(&csm->csar7, CONFIG_SYS_CS7_BASE);
+ out_be32(&csm->csmr7, CONFIG_SYS_CS7_MASK);
+ out_be16(&csm->cscr7, CONFIG_SYS_CS7_CTRL);
+ MCF5307_SP_ERR_FIX(CONFIG_SYS_CS7_BASE, csm->csmr7);
+#endif
+}
+
+/*
+ * Set up the memory map and initialize registers
+ */
+void cpu_init_f(void)
+{
+ sim_t *sim = (sim_t *)(MMAP_SIM);
+
+ out_8(&sim->sypcr, 0x00);
+ out_8(&sim->swivr, 0x0f);
+ out_8(&sim->swsr, 0x00);
+ out_8(&sim->mpark, 0x00);
+
+ intctrl_t *icr = (intctrl_t *)(MMAP_INTC);
+
+ /* timer 2 not masked */
+ out_be32(&icr->imr, 0xfffffbff);
+
+ out_8(&icr->icr0, 0x00); /* sw watchdog */
+ out_8(&icr->icr1, 0x00); /* timer 1 */
+ out_8(&icr->icr2, 0x88); /* timer 2 */
+ out_8(&icr->icr3, 0x00); /* i2c */
+ out_8(&icr->icr4, 0x00); /* uart 0 */
+ out_8(&icr->icr5, 0x00); /* uart 1 */
+ out_8(&icr->icr6, 0x00); /* dma 0 */
+ out_8(&icr->icr7, 0x00); /* dma 1 */
+ out_8(&icr->icr8, 0x00); /* dma 2 */
+ out_8(&icr->icr9, 0x00); /* dma 3 */
+
+ /* Chipselect Init */
+ init_csm();
+
+ /* enable data/instruction cache now */
+ icache_enable();
+}
+
+/*
+ * initialize higher level parts of CPU like timers
+ */
+int cpu_init_r(void)
+{
+ return 0;
+}
+
+void uart_port_conf(void)
+{
+}
+
+void arch_preboot_os(void)
+{
+ /*
+ * OS can change interrupt offsets and are about to boot the OS so
+ * we need to make sure we disable all async interrupts.
+ */
+ intctrl_t *icr = (intctrl_t *)(MMAP_INTC);
+
+ out_8(&icr->icr1, 0x00); /* timer 1 */
+ out_8(&icr->icr2, 0x00); /* timer 2 */
+}
+#endif