nios2: enable device tree control of U-Boot
This patch adds device tree control of U-Boot to nios2 boards.
The example dts is taken from Linux kernel.
Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Marek Vasut <marex@denx.de>
diff --git a/arch/nios2/dts/3c120_devboard.dts b/arch/nios2/dts/3c120_devboard.dts
new file mode 100644
index 0000000..02524ab
--- /dev/null
+++ b/arch/nios2/dts/3c120_devboard.dts
@@ -0,0 +1,153 @@
+/*
+ * Copyright (C) 2013 Altera Corporation
+ *
+ * This file is generated by sopc2dts.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/dts-v1/;
+
+/ {
+ model = "altr,qsys_ghrd_3c120";
+ compatible = "altr,qsys_ghrd_3c120";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu: cpu@0x0 {
+ device_type = "cpu";
+ compatible = "altr,nios2-1.0";
+ reg = <0x00000000>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ clock-frequency = <125000000>;
+ dcache-line-size = <32>;
+ icache-line-size = <32>;
+ dcache-size = <32768>;
+ icache-size = <32768>;
+ altr,implementation = "fast";
+ altr,pid-num-bits = <8>;
+ altr,tlb-num-ways = <16>;
+ altr,tlb-num-entries = <128>;
+ altr,tlb-ptr-sz = <7>;
+ altr,has-div = <1>;
+ altr,has-mul = <1>;
+ altr,reset-addr = <0xc2800000>;
+ altr,fast-tlb-miss-addr = <0xc7fff400>;
+ altr,exception-addr = <0xd0000020>;
+ altr,has-initda = <1>;
+ altr,has-mmu = <1>;
+ };
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x10000000 0x08000000>,
+ <0x07fff400 0x00000400>;
+ };
+
+ sopc@0 {
+ device_type = "soc";
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "altr,avalon", "simple-bus";
+ bus-frequency = <125000000>;
+
+ pb_cpu_to_io: bridge@0x8000000 {
+ compatible = "simple-bus";
+ reg = <0x08000000 0x00800000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00002000 0x08002000 0x00002000>,
+ <0x00004000 0x08004000 0x00000400>,
+ <0x00004400 0x08004400 0x00000040>,
+ <0x00004800 0x08004800 0x00000040>,
+ <0x00004c80 0x08004c80 0x00000020>,
+ <0x00004d50 0x08004d50 0x00000008>,
+ <0x00008000 0x08008000 0x00000020>,
+ <0x00400000 0x08400000 0x00000020>;
+
+ timer_1ms: timer@0x400000 {
+ compatible = "altr,timer-1.0";
+ reg = <0x00400000 0x00000020>;
+ interrupt-parent = <&cpu>;
+ interrupts = <11>;
+ clock-frequency = <125000000>;
+ };
+
+ timer_0: timer@0x8000 {
+ compatible = "altr,timer-1.0";
+ reg = < 0x00008000 0x00000020 >;
+ interrupt-parent = < &cpu >;
+ interrupts = < 5 >;
+ clock-frequency = < 125000000 >;
+ };
+
+ jtag_uart: serial@0x4d50 {
+ compatible = "altr,juart-1.0";
+ reg = <0x00004d50 0x00000008>;
+ interrupt-parent = <&cpu>;
+ interrupts = <1>;
+ };
+
+ tse_mac: ethernet@0x4000 {
+ compatible = "altr,tse-1.0";
+ reg = <0x00004000 0x00000400>,
+ <0x00004400 0x00000040>,
+ <0x00004800 0x00000040>,
+ <0x00002000 0x00002000>;
+ reg-names = "control_port", "rx_csr", "tx_csr", "s1";
+ interrupt-parent = <&cpu>;
+ interrupts = <2 3>;
+ interrupt-names = "rx_irq", "tx_irq";
+ rx-fifo-depth = <8192>;
+ tx-fifo-depth = <8192>;
+ max-frame-size = <1518>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ phy-mode = "rgmii-id";
+ phy-handle = <&phy0>;
+ tse_mac_mdio: mdio {
+ compatible = "altr,tse-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ phy0: ethernet-phy@18 {
+ reg = <18>;
+ device_type = "ethernet-phy";
+ };
+ };
+ };
+
+ uart: serial@0x4c80 {
+ compatible = "altr,uart-1.0";
+ reg = <0x00004c80 0x00000020>;
+ interrupt-parent = <&cpu>;
+ interrupts = <10>;
+ current-speed = <115200>;
+ clock-frequency = <62500000>;
+ };
+ };
+
+ cfi_flash_64m: flash@0x0 {
+ compatible = "cfi-flash";
+ reg = <0x00000000 0x04000000>;
+ bank-width = <2>;
+ device-width = <1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@800000 {
+ reg = <0x00800000 0x01e00000>;
+ label = "JFFS2 Filesystem";
+ };
+ };
+ };
+
+ chosen {
+ bootargs = "debug console=ttyJ0,115200";
+ };
+};