mxs: mmc: Fix the MMC driver for MX23
The MX23 has different layout of DMA channels. Fix the MMC
driver to support MX23.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Otavio Salvador <otavio@ossystems.com.br>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Stefano Babic <sbabic@denx.de>
diff --git a/drivers/mmc/mxsmmc.c b/drivers/mmc/mxsmmc.c
index 023dbd5..a72f66c 100644
--- a/drivers/mmc/mxsmmc.c
+++ b/drivers/mmc/mxsmmc.c
@@ -53,6 +53,12 @@
struct mxs_dma_desc *desc;
};
+#if defined(CONFIG_MX23)
+static const unsigned int mxsmmc_id_offset = 1;
+#elif defined(CONFIG_MX28)
+static const unsigned int mxsmmc_id_offset = 0;
+#endif
+
#define MXSMMC_MAX_TIMEOUT 10000
#define MXSMMC_SMALL_TRANSFER 512
@@ -131,7 +137,7 @@
priv->desc->cmd.data |= MXS_DMA_DESC_IRQ | MXS_DMA_DESC_DEC_SEM |
(data_count << MXS_DMA_DESC_BYTES_OFFSET);
- dmach = MXS_DMA_CHANNEL_AHB_APBH_SSP0 + priv->id;
+ dmach = MXS_DMA_CHANNEL_AHB_APBH_SSP0 + priv->id + mxsmmc_id_offset;
mxs_dma_desc_append(dmach, priv->desc);
if (mxs_dma_go(dmach)) {
bounce_buffer_stop(&bbstate);
@@ -222,14 +228,25 @@
}
ctrl0 |= SSP_CTRL0_DATA_XFER;
+
+ reg = data->blocksize * data->blocks;
+#if defined(CONFIG_MX23)
+ ctrl0 |= reg & SSP_CTRL0_XFER_COUNT_MASK;
+
+ clrsetbits_le32(&ssp_regs->hw_ssp_cmd0,
+ SSP_CMD0_BLOCK_SIZE_MASK | SSP_CMD0_BLOCK_COUNT_MASK,
+ ((data->blocks - 1) << SSP_CMD0_BLOCK_COUNT_OFFSET) |
+ ((ffs(data->blocksize) - 1) <<
+ SSP_CMD0_BLOCK_SIZE_OFFSET));
+#elif defined(CONFIG_MX28)
+ writel(reg, &ssp_regs->hw_ssp_xfer_size);
+
reg = ((data->blocks - 1) <<
SSP_BLOCK_SIZE_BLOCK_COUNT_OFFSET) |
((ffs(data->blocksize) - 1) <<
SSP_BLOCK_SIZE_BLOCK_SIZE_OFFSET);
writel(reg, &ssp_regs->hw_ssp_block_size);
-
- reg = data->blocksize * data->blocks;
- writel(reg, &ssp_regs->hw_ssp_xfer_size);
+#endif
}
/* Kick off the command */
@@ -401,7 +418,7 @@
return -ENOMEM;
}
- ret = mxs_dma_init_channel(id);
+ ret = mxs_dma_init_channel(id + mxsmmc_id_offset);
if (ret)
return ret;