arm: add initial support for the Phytium Durian Board
This adds platform code and the device tree for the Phytium Durian Board.
The initial support comprises the UART and the PCIE.
Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Kever Yang <kever.yang@rock-chips.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Steven Hao <liuhao@phytium.com.cn>
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 629c5e8..7b80630 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1631,6 +1631,13 @@
select OF_CONTROL
imply CMD_DM
+config TARGET_DURIAN
+ bool "Support Phytium Durian Platform"
+ select ARM64
+ help
+ Support for durian platform.
+ It has 2GB Sdram, uart and pcie.
+
endchoice
config ARCH_SUPPORT_TFABOOT
@@ -1830,6 +1837,7 @@
source "board/xilinx/Kconfig"
source "board/xilinx/zynq/Kconfig"
source "board/xilinx/zynqmp/Kconfig"
+source "board/phytium/durian/Kconfig"
source "arch/arm/Kconfig.debug"
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 251d32c..89ab800 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -834,6 +834,8 @@
dtb-$(CONFIG_TARGET_VEXPRESS_CA9X4) += vexpress-v2p-ca9.dtb
dtb-$(CONFIG_TARGET_VEXPRESS_CA15_TC2) += vexpress-v2p-ca15_a7.dtb
+dtb-$(CONFIG_TARGET_DURIAN) += phytium-durian.dtb
+
targets += $(dtb-y)
# Add any required device tree compiler flags here
diff --git a/arch/arm/dts/phytium-durian.dts b/arch/arm/dts/phytium-durian.dts
new file mode 100644
index 0000000..3b76949
--- /dev/null
+++ b/arch/arm/dts/phytium-durian.dts
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019, Phytium Ltd.
+ * shuyiqi <shuyiqi@phytium.com.cn>
+ */
+
+/dts-v1/;
+
+/ {
+ model = "Phytium Durian";
+ compatible = "phytium,durian";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ pcie-controller@40000000 {
+ compatible = "phytium,pcie-host-1.0";
+ device_type = "pci";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ reg = <0x0 0x40000000 0x0 0x10000000>;
+ bus-range = <0x0 0xff>;
+ ranges = <0x1000000 0x0 0x0 0x0 0x50000000 0x0 0xF00000>,
+ <0x2000000 0x0 0x58000000 0x0 0x58000000 0x0 0x28000000>,
+ <0x43000000 0x10 0x00000000 0x10 0x00000000 0x10 0x00000000>;
+ };
+
+ uart@28001000 {
+ compatible = "arm,pl011";
+ reg = <0x0 0x28001000 0x0 0x1000>;
+ clock = <48000000>;
+ };
+};
+