ARM: sunxi: Add support for R_PIO gpio banks
The A31, A23 and later SoCs have an extra pin controller, called CPUs_PIO
or R_PIO, which handles pin banks L and beyond.
Also add a clear description about SUNXI_GPIO_BANKS, stating it only
counts the number of pin banks in the _main_ pin controller.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
[wens@csie.org: expanded commit message]
[wens@csie.org: add pin bank M and expand comments]
[wens@csie.org: add comment on SUNXI_GPIO_BANKS macro]
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
diff --git a/arch/arm/include/asm/arch-sunxi/gpio.h b/arch/arm/include/asm/arch-sunxi/gpio.h
index 7e2b169..de7a86a 100644
--- a/arch/arm/include/asm/arch-sunxi/gpio.h
+++ b/arch/arm/include/asm/arch-sunxi/gpio.h
@@ -10,6 +10,7 @@
#define _SUNXI_GPIO_H
#include <linux/types.h>
+#include <asm/arch/cpu.h>
/*
* sunxi has 9 banks of gpio, they are:
@@ -27,8 +28,27 @@
#define SUNXI_GPIO_G 6
#define SUNXI_GPIO_H 7
#define SUNXI_GPIO_I 8
+
+/*
+ * This defines the number of GPIO banks for the _main_ GPIO controller.
+ * You should fix up the padding in struct sunxi_gpio_reg below if you
+ * change this.
+ */
#define SUNXI_GPIO_BANKS 9
+/*
+ * sun6i/sun8i and later SoCs have an additional GPIO controller (R_PIO)
+ * at a different register offset.
+ *
+ * sun6i has 2 banks:
+ * PL0 - PL8 | PM0 - PM7
+ *
+ * sun8i has 1 bank:
+ * PL0 - PL11
+ */
+#define SUNXI_GPIO_L 11
+#define SUNXI_GPIO_M 12
+
struct sunxi_gpio {
u32 cfg[4];
u32 dat;
@@ -50,8 +70,9 @@
struct sunxi_gpio_int gpio_int;
};
-#define BANK_TO_GPIO(bank) \
- &((struct sunxi_gpio_reg *)SUNXI_PIO_BASE)->gpio_bank[bank]
+#define BANK_TO_GPIO(bank) (((bank) < SUNXI_GPIO_L) ? \
+ &((struct sunxi_gpio_reg *)SUNXI_PIO_BASE)->gpio_bank[bank] : \
+ &((struct sunxi_gpio_reg *)SUNXI_R_PIO_BASE)->gpio_bank[(bank) - SUNXI_GPIO_L])
#define GPIO_BANK(pin) ((pin) >> 5)
#define GPIO_NUM(pin) ((pin) & 0x1f)
@@ -75,6 +96,8 @@
#define SUNXI_GPIO_G_NR 32
#define SUNXI_GPIO_H_NR 32
#define SUNXI_GPIO_I_NR 32
+#define SUNXI_GPIO_L_NR 32
+#define SUNXI_GPIO_M_NR 32
#define SUNXI_GPIO_NEXT(__gpio) \
((__gpio##_START) + (__gpio##_NR) + 0)
@@ -89,6 +112,8 @@
SUNXI_GPIO_G_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_F),
SUNXI_GPIO_H_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_G),
SUNXI_GPIO_I_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_H),
+ SUNXI_GPIO_L_START = 352,
+ SUNXI_GPIO_M_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_L),
};
/* SUNXI GPIO number definitions */
@@ -101,6 +126,8 @@
#define SUNXI_GPG(_nr) (SUNXI_GPIO_G_START + (_nr))
#define SUNXI_GPH(_nr) (SUNXI_GPIO_H_START + (_nr))
#define SUNXI_GPI(_nr) (SUNXI_GPIO_I_START + (_nr))
+#define SUNXI_GPL(_nr) (SUNXI_GPIO_L_START + (_nr))
+#define SUNXI_GPM(_nr) (SUNXI_GPIO_M_START + (_nr))
/* GPIO pin function config */
#define SUNXI_GPIO_INPUT 0