ARM: AM4372: Update EMIF registers for DDR3

Updating EMIF_PHY_CTRL and adding EMIF_READ_WRITE_EXECUTION_THRESHOLD
registers.
In EMIF_PHY_CTRL:
Updating [4:0]READ_LATENCY to 8, because at higher frequencies like
400MHz the read latency expected will be CL+3 as per tests from HW
folks.
Clearing [19]PHY_DIS_CALIB_RST bit as this is used onl for debug
purpose. With out this resume is not working(Still waiting for PHY team
to come back for better explanation).

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
diff --git a/board/ti/am43xx/board.c b/board/ti/am43xx/board.c
index 0c9f0ef..7a28063 100644
--- a/board/ti/am43xx/board.c
+++ b/board/ti/am43xx/board.c
@@ -206,7 +206,7 @@
 	.read_idle_ctrl			= 0x00050000,
 	.zq_config			= 0x50074BE4,
 	.temp_alert_config		= 0x0,
-	.emif_ddr_phy_ctlr_1		= 0x0E084008,
+	.emif_ddr_phy_ctlr_1		= 0x0E004008,
 	.emif_ddr_ext_phy_ctrl_1	= 0x08020080,
 	.emif_ddr_ext_phy_ctrl_2	= 0x00400040,
 	.emif_ddr_ext_phy_ctrl_3	= 0x00400040,