ARM: tegra: pinmux naming consistency fixes
Clean up the naming of pinmux-related objects:
* Refer to drive groups rather than pad groups to match the Linux kernel.
* Ensure all pinmux API types are prefixed with pmux_, values (defines)
are prefixed with PMUX_, and functions prefixed with pinmux_.
* Modify a few type names to make their content clearer.
* Minimal changes to SoC-specific .h/.c files are made so the code still
compiles. A separate per-SoC change will be made immediately following,
in order to keep individual patch size down.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
diff --git a/arch/arm/include/asm/arch-tegra/pinmux.h b/arch/arm/include/asm/arch-tegra/pinmux.h
index b8d21c1..80b8046 100644
--- a/arch/arm/include/asm/arch-tegra/pinmux.h
+++ b/arch/arm/include/asm/arch-tegra/pinmux.h
@@ -63,16 +63,16 @@
* you can call pinmux_config_pingroup() to configure a pin in one step. Also
* available is pinmux_config_table() to configure a list of pins.
*/
-struct pingroup_config {
- enum pmux_pingrp pingroup; /* pin group PINGRP_... */
- enum pmux_func func; /* function to assign FUNC_... */
+struct pmux_pingrp_config {
+ enum pmux_pingrp pingrp; /* pin group PMUX_PINGRP_... */
+ enum pmux_func func; /* function to assign PMUX_FUNC_... */
enum pmux_pull pull; /* pull up/down/normal PMUX_PULL_...*/
enum pmux_tristate tristate; /* tristate or normal PMUX_TRI_... */
#ifdef TEGRA_PMX_HAS_PIN_IO_BIT_ETC
- enum pmux_pin_io io; /* input or output PMUX_PIN_... */
+ enum pmux_pin_io io; /* input or output PMUX_PIN_... */
enum pmux_pin_lock lock; /* lock enable/disable PMUX_PIN... */
- enum pmux_pin_od od; /* open-drain or push-pull driver */
- enum pmux_pin_ioreset ioreset; /* input/output reset PMUX_PIN... */
+ enum pmux_pin_od od; /* open-drain or push-pull driver */
+ enum pmux_pin_ioreset ioreset; /* input/output reset PMUX_PIN... */
#ifdef TEGRA_PMX_HAS_RCV_SEL
enum pmux_pin_rcv_sel rcv_sel; /* select between High and Normal */
/* VIL/VIH receivers */
@@ -103,61 +103,62 @@
* @param config List of config items
* @param len Number of config items in list
*/
-void pinmux_config_table(const struct pingroup_config *config, int len);
+void pinmux_config_pingrp_table(const struct pmux_pingrp_config *config,
+ int len);
-#ifdef TEGRA_PMX_HAS_PADGRPS
+#ifdef TEGRA_PMX_HAS_DRVGRPS
-#define PGRP_SLWF_MIN 0
-#define PGRP_SLWF_MAX 3
-#define PGRP_SLWF_NONE -1
+#define PMUX_SLWF_MIN 0
+#define PMUX_SLWF_MAX 3
+#define PMUX_SLWF_NONE -1
-#define PGRP_SLWR_MIN 0
-#define PGRP_SLWR_MAX 3
-#define PGRP_SLWR_NONE -1
+#define PMUX_SLWR_MIN 0
+#define PMUX_SLWR_MAX 3
+#define PMUX_SLWR_NONE -1
-#define PGRP_DRVUP_MIN 0
-#define PGRP_DRVUP_MAX 127
-#define PGRP_DRVUP_NONE -1
+#define PMUX_DRVUP_MIN 0
+#define PMUX_DRVUP_MAX 127
+#define PMUX_DRVUP_NONE -1
-#define PGRP_DRVDN_MIN 0
-#define PGRP_DRVDN_MAX 127
-#define PGRP_DRVDN_NONE -1
+#define PMUX_DRVDN_MIN 0
+#define PMUX_DRVDN_MAX 127
+#define PMUX_DRVDN_NONE -1
/* Defines a pin group cfg's low-power mode select */
-enum pgrp_lpmd {
- PGRP_LPMD_X8 = 0,
- PGRP_LPMD_X4,
- PGRP_LPMD_X2,
- PGRP_LPMD_X,
- PGRP_LPMD_NONE = -1,
+enum pmux_lpmd {
+ PMUX_LPMD_X8 = 0,
+ PMUX_LPMD_X4,
+ PMUX_LPMD_X2,
+ PMUX_LPMD_X,
+ PMUX_LPMD_NONE = -1,
};
/* Defines whether a pin group cfg's schmidt is enabled or not */
-enum pgrp_schmt {
- PGRP_SCHMT_DISABLE = 0,
- PGRP_SCHMT_ENABLE = 1,
- PGRP_SCHMT_NONE = -1,
+enum pmux_schmt {
+ PMUX_SCHMT_DISABLE = 0,
+ PMUX_SCHMT_ENABLE = 1,
+ PMUX_SCHMT_NONE = -1,
};
/* Defines whether a pin group cfg's high-speed mode is enabled or not */
-enum pgrp_hsm {
- PGRP_HSM_DISABLE = 0,
- PGRP_HSM_ENABLE = 1,
- PGRP_HSM_NONE = -1,
+enum pmux_hsm {
+ PMUX_HSM_DISABLE = 0,
+ PMUX_HSM_ENABLE = 1,
+ PMUX_HSM_NONE = -1,
};
/*
* This defines the configuration for a pin group's pad control config
*/
-struct padctrl_config {
- enum pdrive_pingrp padgrp; /* pin group PDRIVE_PINGRP_x */
+struct pmux_drvgrp_config {
+ enum pmux_drvgrp drvgrp; /* pin group PMUX_DRVGRP_x */
int slwf; /* falling edge slew */
int slwr; /* rising edge slew */
int drvup; /* pull-up drive strength */
int drvdn; /* pull-down drive strength */
- enum pgrp_lpmd lpmd; /* low-power mode selection */
- enum pgrp_schmt schmt; /* schmidt enable */
- enum pgrp_hsm hsm; /* high-speed mode enable */
+ enum pmux_lpmd lpmd; /* low-power mode selection */
+ enum pmux_schmt schmt; /* schmidt enable */
+ enum pmux_hsm hsm; /* high-speed mode enable */
};
/**
@@ -166,11 +167,12 @@
* @param config List of config items
* @param len Number of config items in list
*/
-void padgrp_config_table(const struct padctrl_config *config, int len);
+void pinmux_config_drvgrp_table(const struct pmux_drvgrp_config *config,
+ int len);
-#endif /* TEGRA_PMX_HAS_PADGRPS */
+#endif /* TEGRA_PMX_HAS_DRVGRPS */
-struct tegra_pingroup_desc {
+struct pmux_pingrp_desc {
enum pmux_func funcs[4];
#if defined(CONFIG_TEGRA20)
u32 ctl_id;
@@ -178,6 +180,6 @@
#endif /* CONFIG_TEGRA20 */
};
-extern const struct tegra_pingroup_desc *tegra_soc_pingroups;
+extern const struct pmux_pingrp_desc *tegra_soc_pingroups;
#endif /* _TEGRA_PINMUX_H_ */