Merge branch 'master' of git://git.denx.de/u-boot-sh
diff --git a/MAINTAINERS b/MAINTAINERS
index 57a79b4..b5f3458 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -753,12 +753,15 @@
MIGO-R SH7722
Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ <iwamatsu.nobuhiro@renesas.com>
MS7750SE SH7750
MS7722SE SH7722
R7780MP SH7780
R2DPlus SH7751R
SH7763RDP SH7763
+ RSK7203 SH7203
+ AP325RXA SH7723
Mark Jonas <mark.jonas@de.bosch.com>
@@ -767,6 +770,11 @@
Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
MS7720SE SH7720
+ R0P77850011RL SH7785
+
+Yusuke Goda <goda.yusuke@renesas.com>
+
+ MIGO-R SH7722
#########################################################################
# Blackfin Systems: #
diff --git a/MAKEALL b/MAKEALL
index e382947..ff47cf5 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -740,6 +740,9 @@
## SH Systems
#########################################################################
+LIST_sh2=" \
+ rsk7203 \
+"
LIST_sh3=" \
mpr2 \
ms7720se \
@@ -752,9 +755,12 @@
r7780mp \
r2dplus \
sh7763rdp \
+ sh7785lcr \
+ ap325rxa \
"
LIST_sh=" \
+ ${LIST_sh2} \
${LIST_sh3} \
${LIST_sh4} \
"
@@ -799,7 +805,7 @@
|mips|mips_el \
|nios|nios2 \
|ppc|5xx|5xxx|512x|8xx|8220|824x|8260|83xx|85xx|86xx|4xx|7xx|74xx|TSEC \
- |sh|sh3|sh4 \
+ |sh|sh2|sh3|sh4 \
|sparc \
|x86|I486 \
)
diff --git a/Makefile b/Makefile
index 0f82e71..b185503 100644
--- a/Makefile
+++ b/Makefile
@@ -3006,6 +3006,14 @@
#========================================================================
#########################################################################
+## sh2 (Renesas SuperH)
+#########################################################################
+rsk7203_config: unconfig
+ @ >include/config.h
+ @echo "#define CONFIG_RSK7203 1" >> include/config.h
+ @./mkconfig -a $(@:_config=) sh sh2 rsk7203
+
+#########################################################################
## sh3 (Renesas SuperH)
#########################################################################
@@ -3041,17 +3049,27 @@
r2dplus_config : unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_R2DPLUS 1" > $(obj)include/config.h
- @./mkconfig -a $(@:_config=) sh sh4 r2dplus
+ @$(MKCONFIG) -a $(@:_config=) sh sh4 r2dplus
r7780mp_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_R7780MP 1" > $(obj)include/config.h
- @./mkconfig -a $(@:_config=) sh sh4 r7780mp
+ @$(MKCONFIG) -a $(@:_config=) sh sh4 r7780mp
sh7763rdp_config : unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_SH7763RDP 1" > $(obj)include/config.h
- @./mkconfig -a $(@:_config=) sh sh4 sh7763rdp
+ @$(MKCONFIG) -a $(@:_config=) sh sh4 sh7763rdp
+
+sh7785lcr_config : unconfig
+ @ >include/config.h
+ @echo "#define CONFIG_SH7785LCR 1" >> include/config.h
+ @$(MKCONFIG) -a $(@:_config=) sh sh4 sh7785lcr
+
+ap325rxa_config : unconfig
+ @mkdir -p $(obj)include
+ @echo "#define CONFIG_AP325RXA 1" > $(obj)include/config.h
+ @$(MKCONFIG) -a $(@:_config=) sh sh4 ap325rxa
#========================================================================
# SPARC
diff --git a/board/ap325rxa/Makefile b/board/ap325rxa/Makefile
new file mode 100644
index 0000000..21f3e6e
--- /dev/null
+++ b/board/ap325rxa/Makefile
@@ -0,0 +1,51 @@
+#########################################################################
+#
+# Copyright (C) 2008 Renesas Solutions Corp.
+# Copyright (C) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+#
+# board/ap325rxa/Makefile
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS := ap325rxa.o cpld-ap325rxa.o
+SOBJS := lowlevel_init.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/ap325rxa/ap325rxa.c b/board/ap325rxa/ap325rxa.c
new file mode 100644
index 0000000..cfa0261
--- /dev/null
+++ b/board/ap325rxa/ap325rxa.c
@@ -0,0 +1,162 @@
+/*
+ * Copyright (C) 2008 Renesas Solutions Corp.
+ * Copyright (C) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+
+/* PRI control register */
+#define PRPRICR5 0xFF800048 /* LMB */
+#define PRPRICR5_D 0x2a
+
+/* FPGA control */
+#define FPGA_NAND_CTL 0xB410020C
+#define FPGA_NAND_RST 0x0008
+#define FPGA_NAND_INIT 0x0000
+#define FPGA_NAND_RST_WAIT 10000
+
+/* I/O port data */
+#define PACR_D 0x0000
+#define PBCR_D 0x0000
+#define PCCR_D 0x1000
+#define PDCR_D 0x0000
+#define PECR_D 0x0410
+#define PFCR_D 0xffff
+#define PGCR_D 0x0000
+#define PHCR_D 0x5011
+#define PJCR_D 0x4400
+#define PKCR_D 0x7c00
+#define PLCR_D 0x0000
+#define PMCR_D 0x0000
+#define PNCR_D 0x0000
+#define PQCR_D 0x0000
+#define PRCR_D 0x0000
+#define PSCR_D 0x0000
+#define PTCR_D 0x0010
+#define PUCR_D 0x0fff
+#define PVCR_D 0xffff
+#define PWCR_D 0x0000
+#define PXCR_D 0x7500
+#define PYCR_D 0x0000
+#define PZCR_D 0x5540
+
+/* Pin Function Controler data */
+#define PSELA_D 0x1410
+#define PSELB_D 0x0140
+#define PSELC_D 0x0000
+#define PSELD_D 0x0400
+
+/* I/O Buffer Hi-Z data */
+#define HIZCRA_D 0x0000
+#define HIZCRB_D 0x1000
+#define HIZCRC_D 0x0000
+#define HIZCRD_D 0x0000
+
+/* Module select reg data */
+#define MSELCRA_D 0x0014
+#define MSELCRB_D 0x0018
+
+/* Module Stop reg Data */
+#define MSTPCR2_D 0xFFD9F280
+
+/* CPLD loader */
+extern void init_cpld(void);
+
+int checkboard(void)
+{
+ puts("BOARD: AP325RXA\n");
+ return 0;
+}
+
+int board_init(void)
+{
+ /* Pin Function Controler Init */
+ outw(PSELA_D, PSELA);
+ outw(PSELB_D, PSELB);
+ outw(PSELC_D, PSELC);
+ outw(PSELD_D, PSELD);
+
+ /* I/O Buffer Hi-Z Init */
+ outw(HIZCRA_D, HIZCRA);
+ outw(HIZCRB_D, HIZCRB);
+ outw(HIZCRC_D, HIZCRC);
+ outw(HIZCRD_D, HIZCRD);
+
+ /* Module select reg Init */
+ outw(MSELCRA_D, MSELCRA);
+ outw(MSELCRB_D, MSELCRB);
+
+ /* Module Stop reg Init */
+ outl(MSTPCR2_D, MSTPCR2);
+
+ /* I/O ports */
+ outw(PACR_D, PACR);
+ outw(PBCR_D, PBCR);
+ outw(PCCR_D, PCCR);
+ outw(PDCR_D, PDCR);
+ outw(PECR_D, PECR);
+ outw(PFCR_D, PFCR);
+ outw(PGCR_D, PGCR);
+ outw(PHCR_D, PHCR);
+ outw(PJCR_D, PJCR);
+ outw(PKCR_D, PKCR);
+ outw(PLCR_D, PLCR);
+ outw(PMCR_D, PMCR);
+ outw(PNCR_D, PNCR);
+ outw(PQCR_D, PQCR);
+ outw(PRCR_D, PRCR);
+ outw(PSCR_D, PSCR);
+ outw(PTCR_D, PTCR);
+ outw(PUCR_D, PUCR);
+ outw(PVCR_D, PVCR);
+ outw(PWCR_D, PWCR);
+ outw(PXCR_D, PXCR);
+ outw(PYCR_D, PYCR);
+ outw(PZCR_D, PZCR);
+
+ /* PRI control register Init */
+ outl(PRPRICR5_D, PRPRICR5);
+
+ /* cpld init */
+ init_cpld();
+
+ return 0;
+}
+
+int dram_init(void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ gd->bd->bi_memstart = CFG_SDRAM_BASE;
+ gd->bd->bi_memsize = CFG_SDRAM_SIZE;
+ printf("DRAM: %dMB\n", CFG_SDRAM_SIZE / (1024 * 1024));
+ return 0;
+}
+
+void led_set_state(unsigned short value)
+{
+}
+
+void ide_set_reset(int idereset)
+{
+ outw(FPGA_NAND_RST, FPGA_NAND_CTL); /* NAND RESET */
+ udelay(FPGA_NAND_RST_WAIT);
+ outw(FPGA_NAND_INIT, FPGA_NAND_CTL);
+}
diff --git a/board/ap325rxa/config.mk b/board/ap325rxa/config.mk
new file mode 100644
index 0000000..b52a5e5
--- /dev/null
+++ b/board/ap325rxa/config.mk
@@ -0,0 +1,26 @@
+#
+# Copyright (C) 2007
+# Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+
+#
+# TEXT_BASE refers to image _after_ relocation.
+#
+# NOTE: Must match value used in u-boot.lds (in this directory).
+#
+
+TEXT_BASE = 0x8FFC0000
diff --git a/board/ap325rxa/cpld-ap325rxa.c b/board/ap325rxa/cpld-ap325rxa.c
new file mode 100644
index 0000000..16fadcb
--- /dev/null
+++ b/board/ap325rxa/cpld-ap325rxa.c
@@ -0,0 +1,206 @@
+/***************************************************************
+ * Project:
+ * CPLD SlaveSerial Configuration via embedded microprocessor.
+ *
+ * Copyright info:
+ *
+ * This is free software; you can redistribute it and/or modify
+ * it as you like.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ *
+ * Description:
+ *
+ * This is the main source file that will allow a microprocessor
+ * to configure Xilinx Virtex, Virtex-E, Virtex-EM, Virtex-II,
+ * and Spartan-II devices via the SlaveSerial Configuration Mode.
+ * This code is discussed in Xilinx Application Note, XAPP502.
+ *
+ * History:
+ * 3-October-2001 MN/MP - Created
+ * 20-August-2008 Renesas Solutions - Modified to SH7723
+ ****************************************************************/
+
+#include <common.h>
+
+/* Serial */
+#define SCIF_BASE 0xffe00000 /* SCIF0 */
+#define SCSMR (vu_short *)(SCIF_BASE + 0x00)
+#define SCBRR (vu_char *)(SCIF_BASE + 0x04)
+#define SCSCR (vu_short *)(SCIF_BASE + 0x08)
+#define SC_TDR (vu_char *)(SCIF_BASE + 0x0C)
+#define SC_SR (vu_short *)(SCIF_BASE + 0x10)
+#define SCFCR (vu_short *)(SCIF_BASE + 0x18)
+#define RFCR (vu_long *)0xFE400020
+
+#define SCSCR_INIT 0x0038
+#define SCSCR_CLR 0x0000
+#define SCFCR_INIT 0x0006
+#define SCSMR_INIT 0x0080
+#define RFCR_CLR 0xA400
+#define SCI_TD_E 0x0020
+#define SCI_TDRE_CLEAR 0x00df
+
+#define BPS_SETTING_VALUE 1 /* 12.5MHz */
+#define WAIT_RFCR_COUNTER 500
+
+/* CPLD data size */
+#define CPLD_DATA_SIZE 169216
+
+/* out */
+#define CPLD_PFC_ADR ((vu_short *)0xA4050112)
+
+#define CPLD_PROG_ADR ((vu_char *)0xA4050132)
+#define CPLD_PROG_DAT 0x80
+
+/* in */
+#define CPLD_INIT_ADR ((vu_char *)0xA4050132)
+#define CPLD_INIT_DAT 0x40
+#define CPLD_DONE_ADR ((vu_char *)0xA4050132)
+#define CPLD_DONE_DAT 0x20
+
+#define HIZCRB ((vu_short *)0xA405015A)
+
+/* data */
+#define CPLD_NOMAL_START 0xA0A80000
+#define CPLD_SAFE_START 0xA0AC0000
+#define MODE_SW (vu_char *)0xA405012A
+
+static void init_cpld_loader(void)
+{
+
+ *SCSCR = SCSCR_CLR;
+ *SCFCR = SCFCR_INIT;
+ *SCSMR = SCSMR_INIT;
+
+ *SCBRR = BPS_SETTING_VALUE;
+
+ *RFCR = RFCR_CLR; /* Refresh counter clear */
+
+ while (*RFCR < WAIT_RFCR_COUNTER)
+ ;
+
+ *SCFCR = 0x0; /* RTRG=00, TTRG=00 */
+ /* MCE=0,TFRST=0,RFRST=0,LOOP=0 */
+ *SCSCR = SCSCR_INIT;
+}
+
+static int check_write_ready(void)
+{
+ u16 status = *SC_SR;
+ return status & SCI_TD_E;
+}
+
+static void write_cpld_data(char ch)
+{
+ while (!check_write_ready())
+ ;
+
+ *SC_TDR = ch;
+ *SC_SR;
+ *SC_SR = SCI_TDRE_CLEAR;
+}
+
+static int delay(void)
+{
+ int i;
+ int c = 0;
+ for (i = 0; i < 200; i++) {
+ c = *(volatile int *)0xa0000000;
+ }
+ return c;
+}
+
+/***********************************************************************
+ *
+ * Function: slave_serial
+ *
+ * Description: Initiates SlaveSerial Configuration.
+ * Calls ShiftDataOut() to output serial data
+ *
+ ***********************************************************************/
+static void slave_serial(void)
+{
+ int i;
+ unsigned char *flash;
+
+ *CPLD_PROG_ADR |= CPLD_PROG_DAT; /* PROGRAM_OE HIGH */
+ delay();
+
+ /*
+ * Toggle Program Pin by Toggling Program_OE bit
+ * This is accomplished by writing to the Program Register in the CPLD
+ *
+ * NOTE: The Program_OE bit should be driven high to bring the Virtex
+ * Program Pin low. Likewise, it should be driven low
+ * to bring the Virtex Program Pin to High-Z
+ */
+
+ *CPLD_PROG_ADR &= ~CPLD_PROG_DAT; /* PROGRAM_OE LOW */
+ delay();
+
+ /*
+ * Bring Program High-Z
+ * (Drive Program_OE bit low to bring Virtex Program Pin to High-Z
+ */
+
+ /* Program_OE bit Low brings the Virtex Program Pin to High Z: */
+ *CPLD_PROG_ADR |= CPLD_PROG_DAT; /* PROGRAM_OE HIGH */
+
+ while ((*CPLD_INIT_ADR & CPLD_INIT_DAT) == 0)
+ delay();
+
+ /* Begin Slave-Serial Configuration */
+ flash = (unsigned char *)CPLD_NOMAL_START;
+
+ for (i = 0; i < CPLD_DATA_SIZE; i++)
+ write_cpld_data(*flash++);
+}
+
+/***********************************************************************
+ *
+ * Function: check_done_bit
+ *
+ * Description: This function takes monitors the CPLD Input Register
+ * by checking the status of the DONE bit in that Register.
+ * By doing so, it monitors the Xilinx Virtex device's DONE
+ * Pin to see if configuration bitstream has been properly
+ * loaded
+ *
+ ***********************************************************************/
+static void check_done_bit(void)
+{
+ while (!(*CPLD_DONE_ADR & CPLD_DONE_DAT))
+ ;
+}
+
+/***********************************************************************
+ *
+ * Function: init_cpld
+ *
+ * Description: Begins Slave Serial configuration of Xilinx FPGA
+ *
+ ***********************************************************************/
+void init_cpld(void)
+{
+ /* Init serial device */
+ init_cpld_loader();
+
+ if (*CPLD_DONE_ADR & CPLD_DONE_DAT) /* Already DONE */
+ return;
+
+ *HIZCRB = 0x0000;
+ *CPLD_PFC_ADR = 0x7c00; /* FPGA PROG = OUTPUT */
+
+ /* write CPLD data from NOR flash to device */
+ slave_serial();
+
+ /*
+ * Monitor the DONE bit in the CPLD Input Register to see if
+ * configuration successful
+ */
+
+ check_done_bit();
+}
diff --git a/board/ap325rxa/lowlevel_init.S b/board/ap325rxa/lowlevel_init.S
new file mode 100644
index 0000000..4f66588
--- /dev/null
+++ b/board/ap325rxa/lowlevel_init.S
@@ -0,0 +1,243 @@
+/*
+ * Copyright (C) 2008 Renesas Solutions Corp.
+ * Copyright (C) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ *
+ * board/ap325rxa/lowlevel_init.S
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <version.h>
+#include <asm/processor.h>
+
+/*
+ * Board specific low level init code, called _very_ early in the
+ * startup sequence. Relocation to SDRAM has not happened yet, no
+ * stack is available, bss section has not been initialised, etc.
+ *
+ * (Note: As no stack is available, no subroutines can be called...).
+ */
+
+ .global lowlevel_init
+
+ .text
+ .align 2
+
+lowlevel_init:
+ mov.l DRVCRA_A, r1
+ mov.l DRVCRA_D, r0
+ mov.w r0, @r1
+
+ mov.l DRVCRB_A, r1
+ mov.l DRVCRB_D, r0
+ mov.w r0, @r1
+
+ mov.l RWTCSR_A, r1
+ mov.l RWTCSR_D1, r0
+ mov.w r0, @r1
+
+ mov.l RWTCNT_A, r1
+ mov.l RWTCNT_D, r0
+ mov.w r0, @r1
+
+ mov.l RWTCSR_A, r1
+ mov.l RWTCSR_D2, r0
+ mov.w r0, @r1
+
+ mov.l FRQCR_A, r1
+ mov.l FRQCR_D, r0
+ mov.l r0, @r1
+
+ mov.l CMNCR_A, r1
+ mov.l CMNCR_D, r0
+ mov.l r0, @r1
+
+ mov.l CS0BCR_A ,r1
+ mov.l CS0BCR_D ,r0
+ mov.l r0, @r1
+
+ mov.l CS4BCR_A ,r1
+ mov.l CS4BCR_D ,r0
+ mov.l r0, @r1
+
+ mov.l CS5ABCR_A ,r1
+ mov.l CS5ABCR_D ,r0
+ mov.l r0, @r1
+
+ mov.l CS5BBCR_A ,r1
+ mov.l CS5BBCR_D ,r0
+ mov.l r0, @r1
+
+ mov.l CS6ABCR_A ,r1
+ mov.l CS6ABCR_D ,r0
+ mov.l r0, @r1
+
+ mov.l CS6BBCR_A ,r1
+ mov.l CS6BBCR_D ,r0
+ mov.l r0, @r1
+
+ mov.l CS0WCR_A ,r1
+ mov.l CS0WCR_D ,r0
+ mov.l r0, @r1
+
+ mov.l CS4WCR_A ,r1
+ mov.l CS4WCR_D ,r0
+ mov.l r0, @r1
+
+ mov.l CS5AWCR_A ,r1
+ mov.l CS5AWCR_D ,r0
+ mov.l r0, @r1
+
+ mov.l CS5BWCR_A ,r1
+ mov.l CS5BWCR_D ,r0
+ mov.l r0, @r1
+
+ mov.l CS6AWCR_A ,r1
+ mov.l CS6AWCR_D ,r0
+ mov.l r0, @r1
+
+ mov.l CS6BWCR_A ,r1
+ mov.l CS6BWCR_D ,r0
+ mov.l r0, @r1
+
+ mov.l SBSC_SDCR_A, r1
+ mov.l SBSC_SDCR_D1, r0
+ mov.l r0, @r1
+
+ mov.l SBSC_SDWCR_A, r1
+ mov.l SBSC_SDWCR_D, r0
+ mov.l r0, @r1
+
+ mov.l SBSC_SDPCR_A, r1
+ mov.l SBSC_SDPCR_D, r0
+ mov.l r0, @r1
+
+ mov.l SBSC_RTCSR_A, r1
+ mov.l SBSC_RTCSR_D, r0
+ mov.l r0, @r1
+
+ mov.l SBSC_RTCNT_A, r1
+ mov.l SBSC_RTCNT_D, r0
+ mov.l r0, @r1
+
+ mov.l SBSC_RTCOR_A, r1
+ mov.l SBSC_RTCOR_D, r0
+ mov.l r0, @r1
+
+ mov.l SBSC_SDMR3_A1, r1
+ mov.l SBSC_SDMR3_D, r0
+ mov.b r0, @r1
+
+ mov.l SBSC_SDMR3_A2, r1
+ mov.l SBSC_SDMR3_D, r0
+ mov.b r0, @r1
+
+ mov.l SLEEP_CNT, r1
+2: tst r1, r1
+ nop
+ bf/s 2b
+ dt r1
+
+ mov.l SBSC_SDMR3_A3, r1
+ mov.l SBSC_SDMR3_D, r0
+ mov.b r0, @r1
+
+ mov.l SBSC_SDCR_A, r1
+ mov.l SBSC_SDCR_D2, r0
+ mov.l r0, @r1
+
+ mov.l CCR_A, r1
+ mov.l CCR_D, r0
+ mov.l r0, @r1
+
+ ! BL bit off (init = ON) (?!?)
+
+ stc sr, r0 ! BL bit off(init=ON)
+ mov.l SR_MASK_D, r1
+ and r1, r0
+ ldc r0, sr
+
+ rts
+ mov #0, r0
+
+ .align 2
+
+DRVCRA_A: .long DRVCRA
+DRVCRB_A: .long DRVCRB
+DRVCRA_D: .long 0x4555
+DRVCRB_D: .long 0x0005
+
+RWTCSR_A: .long RWTCSR
+RWTCNT_A: .long RWTCNT
+FRQCR_A: .long FRQCR
+RWTCSR_D1: .long 0xa507
+RWTCSR_D2: .long 0xa504
+RWTCNT_D: .long 0x5a00
+FRQCR_D: .long 0x0b04474a
+
+SBSC_SDCR_A: .long SBSC_SDCR
+SBSC_SDWCR_A: .long SBSC_SDWCR
+SBSC_SDPCR_A: .long SBSC_SDPCR
+SBSC_RTCSR_A: .long SBSC_RTCSR
+SBSC_RTCNT_A: .long SBSC_RTCNT
+SBSC_RTCOR_A: .long SBSC_RTCOR
+SBSC_SDMR3_A1: .long 0xfe510000
+SBSC_SDMR3_A2: .long 0xfe500242
+SBSC_SDMR3_A3: .long 0xfe5c0042
+
+SBSC_SDCR_D1: .long 0x92810112
+SBSC_SDCR_D2: .long 0x92810912
+SBSC_SDWCR_D: .long 0x05162482
+SBSC_SDPCR_D: .long 0x00300087
+SBSC_RTCSR_D: .long 0xa55a0212
+SBSC_RTCNT_D: .long 0xa55a0000
+SBSC_RTCOR_D: .long 0xa55a0040
+SBSC_SDMR3_D: .long 0x00
+
+CMNCR_A: .long CMNCR
+CS0BCR_A: .long CS0BCR
+CS4BCR_A: .long CS4BCR
+CS5ABCR_A: .long CS5ABCR
+CS5BBCR_A: .long CS5BBCR
+CS6ABCR_A: .long CS6ABCR
+CS6BBCR_A: .long CS6BBCR
+CS0WCR_A: .long CS0WCR
+CS4WCR_A: .long CS4WCR
+CS5AWCR_A: .long CS5AWCR
+CS5BWCR_A: .long CS5BWCR
+CS6AWCR_A: .long CS6AWCR
+CS6BWCR_A: .long CS6BWCR
+
+CMNCR_D: .long 0x00000013
+CS0BCR_D: .long 0x24920400
+CS4BCR_D: .long 0x24920400
+CS5ABCR_D: .long 0x24920400
+CS5BBCR_D: .long 0x7fff0600
+CS6ABCR_D: .long 0x24920400
+CS6BBCR_D: .long 0x24920600
+CS0WCR_D: .long 0x00000480
+CS4WCR_D: .long 0x00000480
+CS5AWCR_D: .long 0x00000380
+CS5BWCR_D: .long 0x00000600
+CS6AWCR_D: .long 0x00000300
+CS6BWCR_D: .long 0x00000540
+
+CCR_A: .long 0xff00001c
+CCR_D: .long 0x0000090d
+
+SLEEP_CNT: .long 0x00000800
+SR_MASK_D: .long 0xEFFFFF0F
diff --git a/board/ap325rxa/u-boot.lds b/board/ap325rxa/u-boot.lds
new file mode 100644
index 0000000..a670374
--- /dev/null
+++ b/board/ap325rxa/u-boot.lds
@@ -0,0 +1,106 @@
+/*
+ * Copyrigth (c) 2007
+ * Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-sh-linux", "elf32-sh-linux", "elf32-sh-linux")
+OUTPUT_ARCH(sh)
+ENTRY(_start)
+
+SECTIONS
+{
+ /*
+ Base address of internal SDRAM is 0x88000000.
+ Although size of SDRAM can be either 16 or 32 MBytes,
+ we assume 16 MBytes (ie ignore upper half if the full
+ 32 MBytes is present).
+
+ NOTE: This address must match with the definition of
+ TEXT_BASE in config.mk (in this directory).
+
+ */
+ . = 0x88000000 + (128*1024*1024) - (256*1024);
+
+ PROVIDE (reloc_dst = .);
+
+ PROVIDE (_ftext = .);
+ PROVIDE (_fcode = .);
+ PROVIDE (_start = .);
+
+ .text :
+ {
+ cpu/sh4/start.o (.text)
+ . = ALIGN(8192);
+ common/environment.o (.ppcenv)
+ . = ALIGN(8192);
+ common/environment.o (.ppcenvr)
+ . = ALIGN(8192);
+ *(.text)
+ . = ALIGN(4);
+ } =0xFF
+ PROVIDE (_ecode = .);
+ .rodata :
+ {
+ *(.rodata)
+ . = ALIGN(4);
+ }
+ PROVIDE (_etext = .);
+
+
+ PROVIDE (_fdata = .);
+ .data :
+ {
+ *(.data)
+ . = ALIGN(4);
+ }
+ PROVIDE (_edata = .);
+
+ PROVIDE (_fgot = .);
+ .got :
+ {
+ *(.got)
+ . = ALIGN(4);
+ }
+ PROVIDE (_egot = .);
+
+ PROVIDE (__u_boot_cmd_start = .);
+ .u_boot_cmd :
+ {
+ *(.u_boot_cmd)
+ . = ALIGN(4);
+ }
+ PROVIDE (__u_boot_cmd_end = .);
+
+ PROVIDE (reloc_dst_end = .);
+ /* _reloc_dst_end = .; */
+
+ PROVIDE (bss_start = .);
+ PROVIDE (__bss_start = .);
+ .bss :
+ {
+ *(.bss)
+ . = ALIGN(4);
+ }
+ PROVIDE (bss_end = .);
+
+ PROVIDE (_end = .);
+}
+
diff --git a/board/rsk7203/Makefile b/board/rsk7203/Makefile
new file mode 100644
index 0000000..7365d19
--- /dev/null
+++ b/board/rsk7203/Makefile
@@ -0,0 +1,45 @@
+#
+# Copyright (C) 2007,2008 Nobuhiro Iwamatsu
+# Copyright (C) 2008 Renesas Solutions Corp.
+#
+# u-boot/board/rsk7203/Makefile
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+
+include $(TOPDIR)/config.mk
+
+LIB = lib$(BOARD).a
+
+OBJS := rsk7203.o
+SOBJS := lowlevel_init.o
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/rsk7203/config.mk b/board/rsk7203/config.mk
new file mode 100644
index 0000000..61aa51f
--- /dev/null
+++ b/board/rsk7203/config.mk
@@ -0,0 +1,28 @@
+#
+# Copyright (C) 2007,2008 Nobuhiro Iwamatsu
+# Copyright (C) 2008 Renesas Solutions Corp.
+#
+# u-boot/board/rsk7203/config.mk
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+
+#
+# TEXT_BASE refers to image _after_ relocation.
+#
+# NOTE: Must match value used in u-boot.lds (in this directory).
+#
+
+TEXT_BASE = 0x0C7C0000
diff --git a/board/rsk7203/lowlevel_init.S b/board/rsk7203/lowlevel_init.S
new file mode 100644
index 0000000..e4d6f9e
--- /dev/null
+++ b/board/rsk7203/lowlevel_init.S
@@ -0,0 +1,265 @@
+/*
+ * Copyright (C) 2008 Nobuhiro Iwamatsu
+ * Copyright (C) 2008 Renesas Solutions Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <config.h>
+#include <version.h>
+
+#include <asm/processor.h>
+
+ .global lowlevel_init
+
+ .text
+ .align 2
+
+lowlevel_init:
+ /* Cache setting */
+ mov.l CCR1_A ,r1
+ mov.l CCR1_D ,r0
+ mov.l r0,@r1
+
+ /* ConfigurePortPins */
+ mov.l PECRL3_A, r1
+ mov.l PECRL3_D, r0
+ mov.w r0,@r1
+
+ mov.l PCCRL4_A, r1
+ mov.l PCCRL4_D0, r0
+ mov.w r0,@r1
+
+ mov.l PECRL4_A, r1
+ mov.l PECRL4_D0, r0
+ mov.w r0,@r1
+
+ mov.l PEIORL_A, r1
+ mov.l PEIORL_D0, r0
+ mov.w r0,@r1
+
+ mov.l PCIORL_A, r1
+ mov.l PCIORL_D, r0
+ mov.w r0,@r1
+
+ mov.l PFCRH2_A, r1
+ mov.l PFCRH2_D, r0
+ mov.w r0,@r1
+
+ mov.l PFCRH3_A, r1
+ mov.l PFCRH3_D, r0
+ mov.w r0,@r1
+
+ mov.l PFCRH1_A, r1
+ mov.l PFCRH1_D, r0
+ mov.w r0,@r1
+
+ mov.l PFIORH_A, r1
+ mov.l PFIORH_D, r0
+ mov.w r0,@r1
+
+ mov.l PECRL1_A, r1
+ mov.l PECRL1_D0, r0
+ mov.w r0,@r1
+
+ mov.l PEIORL_A, r1
+ mov.l PEIORL_D1, r0
+ mov.w r0,@r1
+
+ /* Configure Operating Frequency */
+ mov.l WTCSR_A ,r1
+ mov.l WTCSR_D0 ,r0
+ mov.w r0,@r1
+
+ mov.l WTCSR_A ,r1
+ mov.l WTCSR_D1 ,r0
+ mov.w r0,@r1
+
+ mov.l WTCNT_A ,r1
+ mov.l WTCNT_D ,r0
+ mov.w r0,@r1
+
+ /* Set clock mode*/
+ mov.l FRQCR_A,r1
+ mov.l FRQCR_D,r0
+ mov.w r0,@r1
+
+ /* Configure Bus And Memory */
+init_bsc_cs0:
+ mov.l PCCRL4_A,r1
+ mov.l PCCRL4_D1,r0
+ mov.w r0,@r1
+
+ mov.l PECRL1_A,r1
+ mov.l PECRL1_D1,r0
+ mov.w r0,@r1
+
+ mov.l CMNCR_A,r1
+ mov.l CMNCR_D,r0
+ mov.l r0,@r1
+
+ mov.l SC0BCR_A,r1
+ mov.l SC0BCR_D,r0
+ mov.l r0,@r1
+
+ mov.l CS0WCR_A,r1
+ mov.l CS0WCR_D,r0
+ mov.l r0,@r1
+
+init_bsc_cs1:
+ mov.l PECRL4_A,r1
+ mov.l PECRL4_D1,r0
+ mov.w r0,@r1
+
+ mov.l CS1WCR_A,r1
+ mov.l CS1WCR_D,r0
+ mov.l r0,@r1
+
+init_sdram:
+ mov.l PCCRL2_A,r1
+ mov.l PCCRL2_D,r0
+ mov.w r0,@r1
+
+ mov.l PCCRL4_A,r1
+ mov.l PCCRL4_D2,r0
+ mov.w r0,@r1
+
+ mov.l PCCRL1_A,r1
+ mov.l PCCRL1_D,r0
+ mov.w r0,@r1
+
+ mov.l PCCRL3_A,r1
+ mov.l PCCRL3_D,r0
+ mov.w r0,@r1
+
+ mov.l CS3BCR_A,r1
+ mov.l CS3BCR_D,r0
+ mov.l r0,@r1
+
+ mov.l CS3WCR_A,r1
+ mov.l CS3WCR_D,r0
+ mov.l r0,@r1
+
+ mov.l SDCR_A,r1
+ mov.l SDCR_D,r0
+ mov.l r0,@r1
+
+ mov.l RTCOR_A,r1
+ mov.l RTCOR_D,r0
+ mov.l r0,@r1
+
+ mov.l RTCSR_A,r1
+ mov.l RTCSR_D,r0
+ mov.l r0,@r1
+
+ /* wait 200us */
+ mov.l REPEAT_D,r3
+ mov #0,r2
+repeat0:
+ add #1,r2
+ cmp/hs r3,r2
+ bf repeat0
+ nop
+
+ mov.l SDRAM_MODE, r1
+ mov #0,r0
+ mov.l r0, @r1
+
+ nop
+ rts
+
+ .align 4
+
+CCR1_A: .long CCR1
+CCR1_D: .long 0x0000090B
+PCCRL4_A: .long 0xFFFE3910
+PCCRL4_D0: .long 0x00000000
+PECRL4_A: .long 0xFFFE3A10
+PECRL4_D0: .long 0x00000000
+PECRL3_A: .long 0xFFFE3A12
+PECRL3_D: .long 0x00000000
+PEIORL_A: .long 0xFFFE3A06
+PEIORL_D0: .long 0x00001C00
+PEIORL_D1: .long 0x00001C02
+PCIORL_A: .long 0xFFFE3906
+PCIORL_D: .long 0x00004000
+PFCRH2_A: .long 0xFFFE3A8C
+PFCRH2_D: .long 0x00000000
+PFCRH3_A: .long 0xFFFE3A8A
+PFCRH3_D: .long 0x00000000
+PFCRH1_A: .long 0xFFFE3A8E
+PFCRH1_D: .long 0x00000000
+PFIORH_A: .long 0xFFFE3A84
+PFIORH_D: .long 0x00000729
+PECRL1_A: .long 0xFFFE3A16
+PECRL1_D0: .long 0x00000033
+
+
+WTCSR_A: .long 0xFFFE0000
+WTCSR_D0: .long 0x0000A518
+WTCSR_D1: .long 0x0000A51D
+WTCNT_A: .long 0xFFFE0002
+WTCNT_D: .long 0x00005A84
+FRQCR_A: .long 0xFFFE0010
+FRQCR_D: .long 0x00000104
+
+PCCRL4_D1: .long 0x00000010
+PECRL1_D1: .long 0x00000133
+
+CMNCR_A: .long 0xFFFC0000
+CMNCR_D: .long 0x00001810
+SC0BCR_A: .long 0xFFFC0004
+SC0BCR_D: .long 0x10000400
+CS0WCR_A: .long 0xFFFC0028
+CS0WCR_D: .long 0x00000B41
+PECRL4_D1: .long 0x00000100
+CS1WCR_A: .long 0xFFFC002C
+CS1WCR_D: .long 0x00000B01
+PCCRL4_D2: .long 0x00000011
+PCCRL3_A: .long 0xFFFE3912
+PCCRL3_D: .long 0x00000011
+PCCRL2_A: .long 0xFFFE3914
+PCCRL2_D: .long 0x00001111
+PCCRL1_A: .long 0xFFFE3916
+PCCRL1_D: .long 0x00001010
+PDCRL4_A: .long 0xFFFE3990
+PDCRL4_D: .long 0x00000011
+PDCRL3_A: .long 0xFFFE3992
+PDCRL3_D: .long 0x00000011
+PDCRL2_A: .long 0xFFFE3994
+PDCRL2_D: .long 0x00001111
+PDCRL1_A: .long 0xFFFE3996
+PDCRL1_D: .long 0x00001000
+CS3BCR_A: .long 0xFFFC0010
+CS3BCR_D: .long 0x00004400
+CS3WCR_A: .long 0xFFFC0034
+CS3WCR_D: .long 0x00002892
+SDCR_A: .long 0xFFFC004C
+SDCR_D: .long 0x00000809
+RTCOR_A: .long 0xFFFC0058
+RTCOR_D: .long 0xA55A0041
+RTCSR_A: .long 0xFFFC0050
+RTCSR_D: .long 0xa55a0010
+
+STBCR3_A: .long 0xFFFE0408
+STBCR3_D: .long 0x00000000
+STBCR4_A: .long 0xFFFE040C
+STBCR4_D: .long 0x00000008
+STBCR5_A: .long 0xFFFE0410
+STBCR5_D: .long 0x00000000
+STBCR6_A: .long 0xFFFE0414
+STBCR6_D: .long 0x00000002
+SDRAM_MODE: .long 0xFFFC5040
+REPEAT_D: .long 0x00009C40
diff --git a/board/rsk7203/rsk7203.c b/board/rsk7203/rsk7203.c
new file mode 100644
index 0000000..beb943e
--- /dev/null
+++ b/board/rsk7203/rsk7203.c
@@ -0,0 +1,50 @@
+/*
+ * Copyright (C) 2008 Nobuhiro Iwamatsu
+ * Copyright (C) 2008 Renesas Solutions Corp.
+ *
+ * u-boot/board/rsk7203/rsk7203.c
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+
+int checkboard(void)
+{
+ puts("BOARD: Renesas Technology RSK7203\n");
+ return 0;
+}
+
+int board_init(void)
+{
+ return 0;
+}
+
+int dram_init(void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ gd->bd->bi_memstart = CFG_SDRAM_BASE;
+ gd->bd->bi_memsize = CFG_SDRAM_SIZE;
+ printf("DRAM: %dMB\n", CFG_SDRAM_SIZE / (1024 * 1024));
+ return 0;
+}
+
+void led_set_state(unsigned short value)
+{
+}
diff --git a/board/rsk7203/u-boot.lds b/board/rsk7203/u-boot.lds
new file mode 100644
index 0000000..bf4433a
--- /dev/null
+++ b/board/rsk7203/u-boot.lds
@@ -0,0 +1,101 @@
+/*
+ * Copyright (C) 2008 Nobuhiro Iwamatsu
+ * Copyright (C) 2008 Renesas Solutions Corp.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-sh-linux", "elf32-sh-linux", "elf32-sh-linux")
+OUTPUT_ARCH(sh)
+ENTRY(_start)
+
+SECTIONS
+{
+ /*
+ * Base address of internal SDRAM is 0x0C000000.
+ *
+ * NOTE: This address must match with the definition of
+ *TEXT_BASE in config.mk (in this directory).
+ */
+
+ . = 0x0C000000 + (8*1024*1024) - (256*1024);
+
+ PROVIDE (reloc_dst = .);
+
+ PROVIDE (_ftext = .);
+ PROVIDE (_fcode = .);
+ PROVIDE (_start = .);
+
+ .text :
+ {
+ cpu/sh2/start.o (.text)
+ . = ALIGN(8192);
+ common/environment.o (.ppcenv)
+ . = ALIGN(8192);
+ common/environment.o (.ppcenvr)
+ . = ALIGN(8192);
+ *(.text)
+ . = ALIGN(4);
+ } =0xFF
+ PROVIDE (_ecode = .);
+ .rodata :
+ {
+ *(.rodata)
+ . = ALIGN(4);
+ }
+ PROVIDE (_etext = .);
+
+
+ PROVIDE (_fdata = .);
+ .data :
+ {
+ *(.data)
+ . = ALIGN(4);
+ }
+ PROVIDE (_edata = .);
+
+ PROVIDE (_fgot = .);
+ .got :
+ {
+ *(.got)
+ . = ALIGN(4);
+ }
+ PROVIDE (_egot = .);
+
+ PROVIDE (__u_boot_cmd_start = .);
+ .u_boot_cmd :
+ {
+ *(.u_boot_cmd)
+ . = ALIGN(4);
+ }
+ PROVIDE (__u_boot_cmd_end = .);
+
+ PROVIDE (reloc_dst_end = .);
+
+ PROVIDE (bss_start = .);
+ PROVIDE (__bss_start = .);
+ .bss :
+ {
+ *(.bss)
+ . = ALIGN(4);
+ }
+ PROVIDE (bss_end = .);
+
+ PROVIDE (_end = .);
+}
diff --git a/board/sh7785lcr/Makefile b/board/sh7785lcr/Makefile
new file mode 100644
index 0000000..b1b538c
--- /dev/null
+++ b/board/sh7785lcr/Makefile
@@ -0,0 +1,42 @@
+#
+# Copyright (C) 2008 Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+
+include $(TOPDIR)/config.mk
+
+LIB = lib$(BOARD).a
+
+COBJS := sh7785lcr.o selfcheck.o rtl8169_mac.o
+SOBJS := lowlevel_init.o
+
+$(LIB): $(obj).depend $(COBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(COBJS) $(SOBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/sh7785lcr/config.mk b/board/sh7785lcr/config.mk
new file mode 100644
index 0000000..93761ee
--- /dev/null
+++ b/board/sh7785lcr/config.mk
@@ -0,0 +1,26 @@
+#
+# Copyright (C) 2007
+# Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+
+#
+# TEXT_BASE refers to image _after_ relocation.
+#
+# NOTE: Must match value used in u-boot.lds (in this directory).
+#
+TEXT_BASE = 0x0ff80000
+
diff --git a/board/sh7785lcr/lowlevel_init.S b/board/sh7785lcr/lowlevel_init.S
new file mode 100644
index 0000000..8126296
--- /dev/null
+++ b/board/sh7785lcr/lowlevel_init.S
@@ -0,0 +1,318 @@
+/*
+ * Copyright (C) 2008 Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <config.h>
+#include <version.h>
+#include <asm/processor.h>
+
+.macro write32, addr, data
+ mov.l \addr ,r1
+ mov.l \data ,r0
+ mov.l r0, @r1
+.endm
+
+.macro write16, addr, data
+ mov.l \addr ,r1
+ mov.l \data ,r0
+ mov.w r0, @r1
+.endm
+
+.macro write8, addr, data
+ mov.l \addr ,r1
+ mov.l \data ,r0
+ mov.b r0, @r1
+.endm
+
+.macro wait_timer, time
+ mov.l \time ,r3
+1:
+ nop
+ tst r3, r3
+ bf/s 1b
+ dt r3
+.endm
+
+#include <asm/processor.h>
+
+ .global lowlevel_init
+
+ .text
+ .align 2
+
+lowlevel_init:
+ wait_timer WAIT_200US
+ wait_timer WAIT_200US
+
+ /*------- LBSC -------*/
+ write32 MMSELR_A, MMSELR_D
+
+ /*------- DBSC2 -------*/
+ write32 DBSC2_DBCONF_A, DBSC2_DBCONF_D
+ write32 DBSC2_DBTR0_A, DBSC2_DBTR0_D
+ write32 DBSC2_DBTR1_A, DBSC2_DBTR1_D
+ write32 DBSC2_DBTR2_A, DBSC2_DBTR2_D
+ write32 DBSC2_DBFREQ_A, DBSC2_DBFREQ_D1
+ write32 DBSC2_DBFREQ_A, DBSC2_DBFREQ_D2
+ wait_timer WAIT_200US
+
+ write32 DBSC2_DBDICODTOCD_A, DBSC2_DBDICODTOCD_D
+ write32 DBSC2_DBCMDCNT_A, DBSC2_DBCMDCNT_D_CKE_H
+ wait_timer WAIT_200US
+ write32 DBSC2_DBCMDCNT_A, DBSC2_DBCMDCNT_D_PALL
+ write32 DBSC2_DBMRCNT_A, DBSC2_DBMRCNT_D_EMRS2
+ write32 DBSC2_DBMRCNT_A, DBSC2_DBMRCNT_D_EMRS3
+ write32 DBSC2_DBMRCNT_A, DBSC2_DBMRCNT_D_EMRS1_1
+ write32 DBSC2_DBMRCNT_A, DBSC2_DBMRCNT_D_MRS_1
+ write32 DBSC2_DBCMDCNT_A, DBSC2_DBCMDCNT_D_PALL
+ write32 DBSC2_DBCMDCNT_A, DBSC2_DBCMDCNT_D_REF
+ write32 DBSC2_DBCMDCNT_A, DBSC2_DBCMDCNT_D_REF
+ write32 DBSC2_DBMRCNT_A, DBSC2_DBMRCNT_D_MRS_2
+ wait_timer WAIT_200US
+
+ write32 DBSC2_DBMRCNT_A, DBSC2_DBMRCNT_D_EMRS1_2
+ write32 DBSC2_DBMRCNT_A, DBSC2_DBMRCNT_D_EMRS1_1
+
+ write32 DBSC2_DBEN_A, DBSC2_DBEN_D
+ write32 DBSC2_DBRFCNT1_A, DBSC2_DBRFCNT1_D
+ write32 DBSC2_DBRFCNT2_A, DBSC2_DBRFCNT2_D
+ write32 DBSC2_DBRFCNT0_A, DBSC2_DBRFCNT0_D
+ wait_timer WAIT_200US
+
+ /*------- GPIO -------*/
+ write16 PACR_A, PACR_D
+ write16 PBCR_A, PBCR_D
+ write16 PCCR_A, PCCR_D
+ write16 PDCR_A, PDCR_D
+ write16 PECR_A, PECR_D
+ write16 PFCR_A, PFCR_D
+ write16 PGCR_A, PGCR_D
+ write16 PHCR_A, PHCR_D
+ write16 PJCR_A, PJCR_D
+ write16 PKCR_A, PKCR_D
+ write16 PLCR_A, PLCR_D
+ write16 PMCR_A, PMCR_D
+ write16 PNCR_A, PNCR_D
+ write16 PPCR_A, PPCR_D
+ write16 PQCR_A, PQCR_D
+ write16 PRCR_A, PRCR_D
+
+ write8 PEPUPR_A, PEPUPR_D
+ write8 PHPUPR_A, PHPUPR_D
+ write8 PJPUPR_A, PJPUPR_D
+ write8 PKPUPR_A, PKPUPR_D
+ write8 PLPUPR_A, PLPUPR_D
+ write8 PMPUPR_A, PMPUPR_D
+ write8 PNPUPR_A, PNPUPR_D
+ write16 PPUPR1_A, PPUPR1_D
+ write16 PPUPR2_A, PPUPR2_D
+ write16 P1MSELR_A, P1MSELR_D
+ write16 P2MSELR_A, P2MSELR_D
+
+ /*------- LBSC -------*/
+ write32 BCR_A, BCR_D
+ write32 CS0BCR_A, CS0BCR_D
+ write32 CS0WCR_A, CS0WCR_D
+ write32 CS1BCR_A, CS1BCR_D
+ write32 CS1WCR_A, CS1WCR_D
+ write32 CS4BCR_A, CS4BCR_D
+ write32 CS4WCR_A, CS4WCR_D
+
+ mov.l PASCR_A, r0
+ mov.l @r0, r2
+ mov.l PASCR_32BIT_MODE, r1
+ tst r1, r2
+ bt lbsc_29bit
+
+ write32 CS2BCR_A, CS_USB_BCR_D
+ write32 CS2WCR_A, CS_USB_WCR_D
+ write32 CS3BCR_A, CS_SD_BCR_D
+ write32 CS3WCR_A, CS_SD_WCR_D
+ write32 CS5BCR_A, CS_I2C_BCR_D
+ write32 CS5WCR_A, CS_I2C_WCR_D
+ write32 CS6BCR_A, CS0BCR_D
+ write32 CS6WCR_A, CS0WCR_D
+ bra lbsc_end
+ nop
+
+lbsc_29bit:
+ write32 CS5BCR_A, CS_USB_BCR_D
+ write32 CS5WCR_A, CS_USB_WCR_D
+ write32 CS6BCR_A, CS_SD_BCR_D
+ write32 CS6WCR_A, CS_SD_WCR_D
+
+lbsc_end:
+
+ write32 CCR_A, CCR_D
+
+ rts
+ nop
+
+ .align 4
+
+/*------- LBSC -------*/
+MMSELR_A: .long 0xfc400020
+MMSELR_D: .long 0xa5a50002
+
+/*------- DBSC2 -------*/
+#define DBSC2_BASE 0xfe800000
+DBSC2_DBSTATE_A: .long DBSC2_BASE + 0x0c
+DBSC2_DBEN_A: .long DBSC2_BASE + 0x10
+DBSC2_DBCMDCNT_A: .long DBSC2_BASE + 0x14
+DBSC2_DBCONF_A: .long DBSC2_BASE + 0x20
+DBSC2_DBTR0_A: .long DBSC2_BASE + 0x30
+DBSC2_DBTR1_A: .long DBSC2_BASE + 0x34
+DBSC2_DBTR2_A: .long DBSC2_BASE + 0x38
+DBSC2_DBRFCNT0_A: .long DBSC2_BASE + 0x40
+DBSC2_DBRFCNT1_A: .long DBSC2_BASE + 0x44
+DBSC2_DBRFCNT2_A: .long DBSC2_BASE + 0x48
+DBSC2_DBRFSTS_A: .long DBSC2_BASE + 0x4c
+DBSC2_DBFREQ_A: .long DBSC2_BASE + 0x50
+DBSC2_DBDICODTOCD_A: .long DBSC2_BASE + 0x54
+DBSC2_DBMRCNT_A: .long DBSC2_BASE + 0x60
+DDR_DUMMY_ACCESS_A: .long 0x40000000
+
+DBSC2_DBCONF_D: .long 0x00630002
+DBSC2_DBTR0_D: .long 0x050b1f04
+DBSC2_DBTR1_D: .long 0x00040204
+DBSC2_DBTR2_D: .long 0x02100308
+DBSC2_DBFREQ_D1: .long 0x00000000
+DBSC2_DBFREQ_D2: .long 0x00000100
+DBSC2_DBDICODTOCD_D: .long 0x000f0907
+
+DBSC2_DBCMDCNT_D_CKE_H: .long 0x00000003
+DBSC2_DBCMDCNT_D_PALL: .long 0x00000002
+DBSC2_DBCMDCNT_D_REF: .long 0x00000004
+
+DBSC2_DBMRCNT_D_EMRS2: .long 0x00020000
+DBSC2_DBMRCNT_D_EMRS3: .long 0x00030000
+DBSC2_DBMRCNT_D_EMRS1_1: .long 0x00010006
+DBSC2_DBMRCNT_D_EMRS1_2: .long 0x00010386
+DBSC2_DBMRCNT_D_MRS_1: .long 0x00000952
+DBSC2_DBMRCNT_D_MRS_2: .long 0x00000852
+
+DBSC2_DBEN_D: .long 0x00000001
+
+DBSC2_DBPDCNT0_D3: .long 0x00000080
+DBSC2_DBRFCNT1_D: .long 0x00000926
+DBSC2_DBRFCNT2_D: .long 0x00fe00fe
+DBSC2_DBRFCNT0_D: .long 0x00010000
+
+WAIT_200US: .long 33333
+
+/*------- GPIO -------*/
+#define GPIO_BASE 0xffe70000
+PACR_A: .long GPIO_BASE + 0x00
+PBCR_A: .long GPIO_BASE + 0x02
+PCCR_A: .long GPIO_BASE + 0x04
+PDCR_A: .long GPIO_BASE + 0x06
+PECR_A: .long GPIO_BASE + 0x08
+PFCR_A: .long GPIO_BASE + 0x0a
+PGCR_A: .long GPIO_BASE + 0x0c
+PHCR_A: .long GPIO_BASE + 0x0e
+PJCR_A: .long GPIO_BASE + 0x10
+PKCR_A: .long GPIO_BASE + 0x12
+PLCR_A: .long GPIO_BASE + 0x14
+PMCR_A: .long GPIO_BASE + 0x16
+PNCR_A: .long GPIO_BASE + 0x18
+PPCR_A: .long GPIO_BASE + 0x1a
+PQCR_A: .long GPIO_BASE + 0x1c
+PRCR_A: .long GPIO_BASE + 0x1e
+PEPUPR_A: .long GPIO_BASE + 0x48
+PHPUPR_A: .long GPIO_BASE + 0x4e
+PJPUPR_A: .long GPIO_BASE + 0x50
+PKPUPR_A: .long GPIO_BASE + 0x52
+PLPUPR_A: .long GPIO_BASE + 0x54
+PMPUPR_A: .long GPIO_BASE + 0x56
+PNPUPR_A: .long GPIO_BASE + 0x58
+PPUPR1_A: .long GPIO_BASE + 0x60
+PPUPR2_A: .long GPIO_BASE + 0x62
+P1MSELR_A: .long GPIO_BASE + 0x80
+P2MSELR_A: .long GPIO_BASE + 0x82
+
+PACR_D: .long 0x0000
+PBCR_D: .long 0x0000
+PCCR_D: .long 0x0000
+PDCR_D: .long 0x0000
+PECR_D: .long 0x0000
+PFCR_D: .long 0x0000
+PGCR_D: .long 0x0000
+PHCR_D: .long 0x00c0
+PJCR_D: .long 0xc3fc
+PKCR_D: .long 0x03ff
+PLCR_D: .long 0x0000
+PMCR_D: .long 0xffff
+PNCR_D: .long 0xf0c3
+PPCR_D: .long 0x0000
+PQCR_D: .long 0x0000
+PRCR_D: .long 0x0000
+
+PEPUPR_D: .long 0xff
+PHPUPR_D: .long 0x00
+PJPUPR_D: .long 0x00
+PKPUPR_D: .long 0x00
+PLPUPR_D: .long 0x00
+PMPUPR_D: .long 0xfc
+PNPUPR_D: .long 0x00
+PPUPR1_D: .long 0xffbf
+PPUPR2_D: .long 0xff00
+P1MSELR_D: .long 0x3780
+P2MSELR_D: .long 0x0000
+
+/*------- LBSC -------*/
+PASCR_A: .long 0xff000070
+PASCR_32BIT_MODE: .long 0x80000000 /* check booting mode */
+
+BCR_A: .long BCR
+CS0BCR_A: .long CS0BCR
+CS0WCR_A: .long CS0WCR
+CS1BCR_A: .long CS1BCR
+CS1WCR_A: .long CS1WCR
+CS2BCR_A: .long CS2BCR
+CS2WCR_A: .long CS2WCR
+CS3BCR_A: .long CS3BCR
+CS3WCR_A: .long CS3WCR
+CS4BCR_A: .long CS4BCR
+CS4WCR_A: .long CS4WCR
+CS5BCR_A: .long CS5BCR
+CS5WCR_A: .long CS5WCR
+CS6BCR_A: .long CS6BCR
+CS6WCR_A: .long CS6WCR
+
+BCR_D: .long 0x80000003
+CS0BCR_D: .long 0x22222340
+CS0WCR_D: .long 0x00111118
+CS1BCR_D: .long 0x11111100
+CS1WCR_D: .long 0x33333303
+CS4BCR_D: .long 0x11111300
+CS4WCR_D: .long 0x00101012
+
+/* USB setting : 32bit mode = CS2, 29bit mode = CS5 */
+CS_USB_BCR_D: .long 0x11111200
+CS_USB_WCR_D: .long 0x00020004
+
+/* SD setting : 32bit mode = CS3, 29bit mode = CS6 */
+CS_SD_BCR_D: .long 0x00000300
+CS_SD_WCR_D: .long 0x00030108
+
+/* I2C setting : 32bit mode = CS5, 29bit mode = CS1(already setting) */
+CS_I2C_BCR_D: .long 0x11111100
+CS_I2C_WCR_D: .long 0x00000003
+
+CCR_A: .long 0xff00001c
+CCR_D: .long 0x0000090b
+
diff --git a/board/sh7785lcr/rtl8169.h b/board/sh7785lcr/rtl8169.h
new file mode 100644
index 0000000..d1c0d64
--- /dev/null
+++ b/board/sh7785lcr/rtl8169.h
@@ -0,0 +1,58 @@
+/*
+ * Copyright (C) 2008 Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#define PCIREG_8(_adr) (*(volatile unsigned char *)(_adr))
+#define PCIREG_32(_adr) (*(volatile unsigned long *)(_adr))
+#define PCI_PAR PCIREG_32(0xfe0401c0)
+#define PCI_PDR PCIREG_32(0xfe040220)
+#define PCI_CR PCIREG_32(0xfe040100)
+#define PCI_CONF1 PCIREG_32(0xfe040004)
+
+#define HIGH 1
+#define LOW 0
+
+#define PCI_PROG 0x80
+#define PCI_EEP_ADDRESS (unsigned short)0x0007
+#define PCI_MAC_ADDRESS_SIZE 3
+
+#define TIME1 100
+#define TIME2 20000
+
+#define BIT_DUMMY 0
+#define MAC_EEP_READ 1
+#define MAC_EEP_WRITE 2
+#define MAC_EEP_ERACE 3
+#define MAC_EEP_EWEN 4
+#define MAC_EEP_EWDS 5
+
+/* RTL8169 */
+const unsigned short EEPROM_W_Data_8169_A[] = {
+ 0x8129, 0x10ec, 0x8169, 0x1154, 0x032b,
+ 0x4020, 0xa101
+};
+const unsigned short EEPROM_W_Data_8169_B[] = {
+ 0x4d15, 0xf7c2, 0x8000, 0x0000, 0x0000, 0x1300,
+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x2000,
+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000
+};
+
diff --git a/board/sh7785lcr/rtl8169_mac.c b/board/sh7785lcr/rtl8169_mac.c
new file mode 100644
index 0000000..2bc873b
--- /dev/null
+++ b/board/sh7785lcr/rtl8169_mac.c
@@ -0,0 +1,349 @@
+/*
+ * Copyright (C) 2008 Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include "rtl8169.h"
+
+static unsigned char *PCI_MEMR;
+
+static void mac_delay(unsigned int cnt)
+{
+ udelay(cnt);
+}
+
+static void mac_pci_setup(void)
+{
+ unsigned long pci_data;
+
+ PCI_PAR = 0x00000010;
+ PCI_PDR = 0x00001000;
+ PCI_PAR = 0x00000004;
+ pci_data = PCI_PDR;
+ PCI_PDR = pci_data | 0x00000007;
+ PCI_PAR = 0x00000010;
+
+ PCI_MEMR = (unsigned char *)((PCI_PDR | 0xFE240050) & 0xFFFFFFF0);
+}
+
+static void EECS(int level)
+{
+ unsigned char data = *PCI_MEMR;
+
+ if (level)
+ *PCI_MEMR = data | 0x08;
+ else
+ *PCI_MEMR = data & 0xf7;
+}
+
+static void EECLK(int level)
+{
+ unsigned char data = *PCI_MEMR;
+
+ if (level)
+ *PCI_MEMR = data | 0x04;
+ else
+ *PCI_MEMR = data & 0xfb;
+}
+
+static void EEDI(int level)
+{
+ unsigned char data = *PCI_MEMR;
+
+ if (level)
+ *PCI_MEMR = data | 0x02;
+ else
+ *PCI_MEMR = data & 0xfd;
+}
+
+static inline void sh7785lcr_bitset(unsigned short bit)
+{
+ if (bit)
+ EEDI(HIGH);
+ else
+ EEDI(LOW);
+
+ EECLK(LOW);
+ mac_delay(TIME1);
+ EECLK(HIGH);
+ mac_delay(TIME1);
+ EEDI(LOW);
+}
+
+static inline unsigned char sh7785lcr_bitget(void)
+{
+ unsigned char bit;
+
+ EECLK(LOW);
+ mac_delay(TIME1);
+ bit = *PCI_MEMR & 0x01;
+ EECLK(HIGH);
+ mac_delay(TIME1);
+
+ return bit;
+}
+
+static inline void sh7785lcr_setcmd(unsigned char command)
+{
+ sh7785lcr_bitset(BIT_DUMMY);
+ switch (command) {
+ case MAC_EEP_READ:
+ sh7785lcr_bitset(1);
+ sh7785lcr_bitset(1);
+ sh7785lcr_bitset(0);
+ break;
+ case MAC_EEP_WRITE:
+ sh7785lcr_bitset(1);
+ sh7785lcr_bitset(0);
+ sh7785lcr_bitset(1);
+ break;
+ case MAC_EEP_ERACE:
+ sh7785lcr_bitset(1);
+ sh7785lcr_bitset(1);
+ sh7785lcr_bitset(1);
+ break;
+ case MAC_EEP_EWEN:
+ sh7785lcr_bitset(1);
+ sh7785lcr_bitset(0);
+ sh7785lcr_bitset(0);
+ break;
+ case MAC_EEP_EWDS:
+ sh7785lcr_bitset(1);
+ sh7785lcr_bitset(0);
+ sh7785lcr_bitset(0);
+ break;
+ default:
+ break;
+ }
+}
+
+static inline unsigned short sh7785lcr_getdt(void)
+{
+ unsigned short data = 0;
+ int i;
+
+ sh7785lcr_bitget(); /* DUMMY */
+ for (i = 0 ; i < 16 ; i++) {
+ data <<= 1;
+ data |= sh7785lcr_bitget();
+ }
+ return data;
+}
+
+static inline void sh7785lcr_setadd(unsigned short address)
+{
+ sh7785lcr_bitset(address & 0x0020); /* A5 */
+ sh7785lcr_bitset(address & 0x0010); /* A4 */
+ sh7785lcr_bitset(address & 0x0008); /* A3 */
+ sh7785lcr_bitset(address & 0x0004); /* A2 */
+ sh7785lcr_bitset(address & 0x0002); /* A1 */
+ sh7785lcr_bitset(address & 0x0001); /* A0 */
+}
+
+static inline void sh7785lcr_setdata(unsigned short data)
+{
+ sh7785lcr_bitset(data & 0x8000);
+ sh7785lcr_bitset(data & 0x4000);
+ sh7785lcr_bitset(data & 0x2000);
+ sh7785lcr_bitset(data & 0x1000);
+ sh7785lcr_bitset(data & 0x0800);
+ sh7785lcr_bitset(data & 0x0400);
+ sh7785lcr_bitset(data & 0x0200);
+ sh7785lcr_bitset(data & 0x0100);
+ sh7785lcr_bitset(data & 0x0080);
+ sh7785lcr_bitset(data & 0x0040);
+ sh7785lcr_bitset(data & 0x0020);
+ sh7785lcr_bitset(data & 0x0010);
+ sh7785lcr_bitset(data & 0x0008);
+ sh7785lcr_bitset(data & 0x0004);
+ sh7785lcr_bitset(data & 0x0002);
+ sh7785lcr_bitset(data & 0x0001);
+}
+
+static void sh7785lcr_datawrite(const unsigned short *data, unsigned short address,
+ unsigned int count)
+{
+ unsigned int i;
+
+ for (i = 0; i < count; i++) {
+ EECS(HIGH);
+ EEDI(LOW);
+ mac_delay(TIME1);
+
+ sh7785lcr_setcmd(MAC_EEP_WRITE);
+ sh7785lcr_setadd(address++);
+ sh7785lcr_setdata(*(data + i));
+
+ EECLK(LOW);
+ EEDI(LOW);
+ EECS(LOW);
+ mac_delay(TIME2);
+ }
+}
+
+static void sh7785lcr_macerase(void)
+{
+ unsigned int i;
+ unsigned short pci_address = 7;
+
+ for (i = 0; i < 3; i++) {
+ EECS(HIGH);
+ EEDI(LOW);
+ mac_delay(TIME1);
+ sh7785lcr_setcmd(MAC_EEP_ERACE);
+ sh7785lcr_setadd(pci_address++);
+ mac_delay(TIME1);
+ EECLK(LOW);
+ EEDI(LOW);
+ EECS(LOW);
+ }
+
+ mac_delay(TIME2);
+
+ printf("\n\nErace End\n");
+ for (i = 0; i < 10; i++)
+ mac_delay(TIME2);
+}
+
+static void sh7785lcr_macwrite(unsigned short *data)
+{
+ sh7785lcr_macerase();
+
+ sh7785lcr_datawrite(EEPROM_W_Data_8169_A, 0x0000, 7);
+ sh7785lcr_datawrite(data, PCI_EEP_ADDRESS, PCI_MAC_ADDRESS_SIZE);
+ sh7785lcr_datawrite(EEPROM_W_Data_8169_B, 0x000a, 54);
+}
+
+void sh7785lcr_macdtrd(unsigned char *buf, unsigned short address, unsigned int count)
+{
+ unsigned int i;
+ unsigned short wk;
+
+ for (i = 0 ; i < count; i++) {
+ EECS(HIGH);
+ EEDI(LOW);
+ mac_delay(TIME1);
+ sh7785lcr_setcmd(MAC_EEP_READ);
+ sh7785lcr_setadd(address++);
+ wk = sh7785lcr_getdt();
+
+ *buf++ = (unsigned char)(wk & 0xff);
+ *buf++ = (unsigned char)((wk >> 8) & 0xff);
+ EECLK(LOW);
+ EEDI(LOW);
+ EECS(LOW);
+ }
+}
+
+static void sh7785lcr_macadrd(unsigned char *buf)
+{
+ *PCI_MEMR = PCI_PROG;
+
+ sh7785lcr_macdtrd(buf, PCI_EEP_ADDRESS, PCI_MAC_ADDRESS_SIZE);
+}
+
+static void sh7785lcr_eepewen(void)
+{
+ *PCI_MEMR = PCI_PROG;
+ mac_delay(TIME1);
+ EECS(LOW);
+ EECLK(LOW);
+ EEDI(LOW);
+ EECS(HIGH);
+ mac_delay(TIME1);
+
+ sh7785lcr_setcmd(MAC_EEP_EWEN);
+ sh7785lcr_bitset(1);
+ sh7785lcr_bitset(1);
+ sh7785lcr_bitset(BIT_DUMMY);
+ sh7785lcr_bitset(BIT_DUMMY);
+ sh7785lcr_bitset(BIT_DUMMY);
+ sh7785lcr_bitset(BIT_DUMMY);
+
+ EECLK(LOW);
+ EEDI(LOW);
+ EECS(LOW);
+ mac_delay(TIME1);
+}
+
+void mac_write(unsigned short *data)
+{
+ mac_pci_setup();
+ sh7785lcr_eepewen();
+ sh7785lcr_macwrite(data);
+}
+
+void mac_read(void)
+{
+ unsigned char data[6];
+
+ mac_pci_setup();
+ sh7785lcr_macadrd(data);
+ printf("Mac = %02x:%02x:%02x:%02x:%02x:%02x\n",
+ data[0], data[1], data[2], data[3], data[4], data[5]);
+}
+
+int do_set_mac(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ int i;
+ unsigned char mac[6];
+ char *s, *e;
+
+ if (argc != 2) {
+ printf("Usage:\n%s\n", cmdtp->usage);
+ return 1;
+ }
+
+ s = argv[1];
+
+ for (i = 0; i < 6; i++) {
+ mac[i] = s ? simple_strtoul(s, &e, 16) : 0;
+ if (s)
+ s = (*e) ? e + 1 : e;
+ }
+ mac_write((unsigned short *)mac);
+
+ return 0;
+}
+
+U_BOOT_CMD(
+ setmac, 2, 1, do_set_mac,
+ "setmac - write MAC address for RTL8110SCL\n",
+ "\n"
+ "setmac <mac address> - write MAC address for RTL8110SCL\n"
+);
+
+int do_print_mac(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ if (argc != 1) {
+ printf("Usage:\n%s\n", cmdtp->usage);
+ return 1;
+ }
+
+ mac_read();
+
+ return 0;
+}
+
+U_BOOT_CMD(
+ printmac, 1, 1, do_print_mac,
+ "printmac - print MAC address for RTL8110\n",
+ "\n"
+ " - print MAC address for RTL8110\n"
+);
+
diff --git a/board/sh7785lcr/selfcheck.c b/board/sh7785lcr/selfcheck.c
new file mode 100644
index 0000000..9c228e5
--- /dev/null
+++ b/board/sh7785lcr/selfcheck.c
@@ -0,0 +1,173 @@
+/*
+ * Copyright (C) 2008 Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+#include <asm/pci.h>
+
+#if defined(CONFIG_CPU_32BIT)
+#define NOCACHE_OFFSET 0x00000000
+#else
+#define NOCACHE_OFFSET 0xa0000000
+#endif
+#define PLD_LEDCR (0x04000008 + NOCACHE_OFFSET)
+#define PLD_SWSR (0x0400000a + NOCACHE_OFFSET)
+#define PLD_VERSR (0x0400000c + NOCACHE_OFFSET)
+
+#define SM107_DEVICEID (0x13e00060 + NOCACHE_OFFSET)
+
+static void wait_ms(unsigned long time)
+{
+ while (time--)
+ udelay(1000);
+}
+
+static void test_pld(void)
+{
+ printf("PLD version = %04x\n", readb(PLD_VERSR));
+}
+
+static void test_sm107(void)
+{
+ printf("SM107 device ID = %04x\n", readl(SM107_DEVICEID));
+}
+
+static void test_led(void)
+{
+ printf("turn on LEDs 3, 5, 7, 9\n");
+ writeb(0x55, PLD_LEDCR);
+ wait_ms(2000);
+ printf("turn on LEDs 4, 6, 8, 10\n");
+ writeb(0xaa, PLD_LEDCR);
+ wait_ms(2000);
+ writeb(0x00, PLD_LEDCR);
+}
+
+static void test_dipsw(void)
+{
+ printf("Please DIPSW set = B'0101\n");
+ while (readb(PLD_SWSR) != 0x05) {
+ if (ctrlc())
+ return;
+ }
+ printf("Please DIPSW set = B'1010\n");
+ while (readb(PLD_SWSR) != 0x0A) {
+ if (ctrlc())
+ return;
+ }
+ printf("DIPSW OK\n");
+}
+
+static void test_net(void)
+{
+ unsigned long data;
+
+ writel(0x80000000, 0xfe0401c0);
+ data = readl(0xfe040220);
+ if (data == 0x816910ec)
+ printf("Ethernet OK\n");
+ else
+ printf("Ethernet NG, data = %08x\n", data);
+}
+
+static void test_sata(void)
+{
+ unsigned long data;
+
+ writel(0x80000800, 0xfe0401c0);
+ data = readl(0xfe040220);
+ if (data == 0x35121095)
+ printf("SATA OK\n");
+ else
+ printf("SATA NG, data = %08x\n", data);
+}
+
+static void test_pci(void)
+{
+ writel(0x80001800, 0xfe0401c0);
+ printf("PCI CN1 ID = %08x\n", readl(0xfe040220));
+
+ writel(0x80001000, 0xfe0401c0);
+ printf("PCI CN2 ID = %08x\n", readl(0xfe040220));
+}
+
+int do_hw_test(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ char *cmd;
+
+ if (argc != 2) {
+ printf("Usage:\n%s\n", cmdtp->usage);
+ return 1;
+ }
+
+ cmd = argv[1];
+ switch (cmd[0]) {
+ case 'a': /* all */
+ test_pld();
+ test_led();
+ test_dipsw();
+ test_sm107();
+ test_net();
+ test_sata();
+ test_pci();
+ break;
+ case 'p': /* pld or pci */
+ if (cmd[1] == 'l')
+ test_pld();
+ else
+ test_pci();
+ break;
+ case 'l': /* led */
+ test_led();
+ break;
+ case 'd': /* dipsw */
+ test_dipsw();
+ break;
+ case 's': /* sm107 or sata */
+ if (cmd[1] == 'm')
+ test_sm107();
+ else
+ test_sata();
+ break;
+ case 'n': /* net */
+ test_net();
+ break;
+ default:
+ printf("Usage:\n%s\n", cmdtp->usage);
+ return 1;
+ }
+
+ return 0;
+}
+
+U_BOOT_CMD(
+ hwtest, 2, 1, do_hw_test,
+ "hwtest - hardware test for R0P7785LC0011RL board\n",
+ "\n"
+ "hwtest all - test all hardware\n"
+ "hwtest pld - output PLD version\n"
+ "hwtest led - turn on LEDs\n"
+ "hwtest dipsw - test DIP switch\n"
+ "hwtest sm107 - output SM107 version\n"
+ "hwtest net - check RTL8110 ID\n"
+ "hwtest sata - check SiI3512 ID\n"
+ "hwtest pci - output PCI slot device ID\n"
+);
+
diff --git a/board/sh7785lcr/sh7785lcr.c b/board/sh7785lcr/sh7785lcr.c
new file mode 100644
index 0000000..5b9c403
--- /dev/null
+++ b/board/sh7785lcr/sh7785lcr.c
@@ -0,0 +1,51 @@
+/*
+ * Copyright (C) 2008 Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+#include <asm/pci.h>
+
+int checkboard(void)
+{
+ puts("BOARD: Renesas Technology Corp. R0P7785LC0011RL\n");
+ return 0;
+}
+
+int board_init(void)
+{
+ return 0;
+}
+
+int dram_init(void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ gd->bd->bi_memstart = CFG_SDRAM_BASE;
+ gd->bd->bi_memsize = CFG_SDRAM_SIZE;
+ printf("DRAM: %dMB\n", CFG_SDRAM_SIZE / (1024 * 1024));
+ return 0;
+}
+
+static struct pci_controller hose;
+void pci_init_board(void)
+{
+ pci_sh7780_init(&hose);
+}
+
diff --git a/board/sh7785lcr/u-boot.lds b/board/sh7785lcr/u-boot.lds
new file mode 100644
index 0000000..f0109eb
--- /dev/null
+++ b/board/sh7785lcr/u-boot.lds
@@ -0,0 +1,97 @@
+/*
+ * Copyrigth (c) 2007
+ * Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ * Copyrigth (c) 2008 Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-sh-linux", "elf32-sh-linux", "elf32-sh-linux")
+OUTPUT_ARCH(sh)
+ENTRY(_start)
+
+SECTIONS
+{
+ . = 0x08000000 + (128 * 1024 * 1024) - (512 * 1024);
+
+ PROVIDE (reloc_dst = .);
+
+ PROVIDE (_ftext = .);
+ PROVIDE (_fcode = .);
+ PROVIDE (_start = .);
+
+ .text :
+ {
+ cpu/sh4/start.o (.text)
+ . = ALIGN(8192);
+ common/environment.o (.ppcenv)
+ . = ALIGN(8192);
+ common/environment.o (.ppcenvr)
+ . = ALIGN(8192);
+ *(.text)
+ . = ALIGN(4);
+ } =0xFF
+ PROVIDE (_ecode = .);
+ .rodata :
+ {
+ *(.rodata)
+ . = ALIGN(4);
+ }
+ PROVIDE (_etext = .);
+
+
+ PROVIDE (_fdata = .);
+ .data :
+ {
+ *(.data)
+ . = ALIGN(4);
+ }
+ PROVIDE (_edata = .);
+
+ PROVIDE (_fgot = .);
+ .got :
+ {
+ *(.got)
+ . = ALIGN(4);
+ }
+ PROVIDE (_egot = .);
+
+ PROVIDE (__u_boot_cmd_start = .);
+ .u_boot_cmd :
+ {
+ *(.u_boot_cmd)
+ . = ALIGN(4);
+ }
+ PROVIDE (__u_boot_cmd_end = .);
+
+ PROVIDE (reloc_dst_end = .);
+ /* _reloc_dst_end = .; */
+
+ PROVIDE (bss_start = .);
+ PROVIDE (__bss_start = .);
+ .bss :
+ {
+ *(.bss)
+ . = ALIGN(4);
+ }
+ PROVIDE (bss_end = .);
+
+ PROVIDE (_end = .);
+}
+
diff --git a/cpu/sh2/Makefile b/cpu/sh2/Makefile
new file mode 100644
index 0000000..50f6720
--- /dev/null
+++ b/cpu/sh2/Makefile
@@ -0,0 +1,49 @@
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# Copyright (C) 2007,2008 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+# Copyright (C) 2008 Renesas Solutions Corp.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(CPU).a
+
+START = start.o
+OBJS = cpu.o interrupts.o watchdog.o time.o # cache.o
+
+all: .depend $(START) $(LIB)
+
+$(LIB): $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c)
+ $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) > $@
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/cpu/sh2/cache.c b/cpu/sh2/cache.c
new file mode 100644
index 0000000..b5c47cf
--- /dev/null
+++ b/cpu/sh2/cache.c
@@ -0,0 +1,112 @@
+/*
+ * (C) Copyright 2007
+ * Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+ *
+ * Copyright (C) 2007, 2008 Nobobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ * Copyright (C) 2008 Renesas Solutions Corp.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+
+/*
+ * Jump to P2 area.
+ * When handling TLB or caches, we need to do it from P2 area.
+ */
+#define jump_to_P2() \
+do { \
+ unsigned long __dummy; \
+ __asm__ __volatile__( \
+ "mov.l 1f, %0\n\t" \
+ "or %1, %0\n\t" \
+ "jmp @%0\n\t" \
+ " nop\n\t" \
+ ".balign 4\n" \
+ "1: .long 2f\n" \
+ "2:" \
+ : "=&r" (__dummy) \
+ : "r" (0x20000000)); \
+} while (0)
+
+/*
+ * Back to P1 area.
+ */
+#define back_to_P1() \
+do { \
+ unsigned long __dummy; \
+ __asm__ __volatile__( \
+ "nop;nop;nop;nop;nop;nop;nop\n\t" \
+ "mov.l 1f, %0\n\t" \
+ "jmp @%0\n\t" \
+ " nop\n\t" \
+ ".balign 4\n" \
+ "1: .long 2f\n" \
+ "2:" \
+ : "=&r" (__dummy)); \
+} while (0)
+
+#define CACHE_VALID 1
+#define CACHE_UPDATED 2
+
+static inline void cache_wback_all(void)
+{
+ unsigned long addr, data, i, j;
+
+ jump_to_P2();
+ for (i = 0; i < CACHE_OC_NUM_ENTRIES; i++) {
+ for (j = 0; j < CACHE_OC_NUM_WAYS; j++) {
+ addr = CACHE_OC_ADDRESS_ARRAY
+ | (j << CACHE_OC_WAY_SHIFT)
+ | (i << CACHE_OC_ENTRY_SHIFT);
+ data = inl(addr);
+ if (data & CACHE_UPDATED) {
+ data &= ~CACHE_UPDATED;
+ outl(data, addr);
+ }
+ }
+ }
+ back_to_P1();
+}
+
+
+#define CACHE_ENABLE 0
+#define CACHE_DISABLE 1
+
+int cache_control(unsigned int cmd)
+{
+ unsigned long ccr;
+
+ jump_to_P2();
+ ccr = inl(CCR);
+
+ if (ccr & CCR_CACHE_ENABLE)
+ cache_wback_all();
+
+ if (cmd == CACHE_DISABLE)
+ outl(CCR_CACHE_STOP, CCR);
+ else
+ outl(CCR_CACHE_INIT, CCR);
+ back_to_P1();
+
+ return 0;
+}
diff --git a/cpu/sh2/config.mk b/cpu/sh2/config.mk
new file mode 100644
index 0000000..52d5a0f
--- /dev/null
+++ b/cpu/sh2/config.mk
@@ -0,0 +1,26 @@
+#
+# (C) Copyright 2007-2008
+# Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+#
+PLATFORM_CPPFLAGS += -m3e -mb
+PLATFORM_RELFLAGS += -ffixed-r13
+PLATFORM_LDFLAGS += -EB
diff --git a/cpu/sh2/cpu.c b/cpu/sh2/cpu.c
new file mode 100644
index 0000000..e0cb047
--- /dev/null
+++ b/cpu/sh2/cpu.c
@@ -0,0 +1,98 @@
+/*
+ * Copyright (C) 2007,2008 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ * Copyright (C) 2008 Renesas Solutions Corp.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+
+#define STBCR4 0xFFFE040C
+#define cmt_clock_enable() do {\
+ writeb(readb(STBCR4) & ~0x04, STBCR4);\
+ } while (0)
+#define scif0_enable() do {\
+ writeb(readb(STBCR4) & ~0x80, STBCR4);\
+ } while (0)
+
+int checkcpu(void)
+{
+#if defined(CONFIG_SH2A)
+ puts("CPU: SH2A\n");
+#else
+ puts("CPU: SH2\n");
+#endif
+ return 0;
+}
+
+int cpu_init(void)
+{
+ /* SCIF enable */
+ scif0_enable();
+ /* CMT clock enable */
+ cmt_clock_enable() ;
+ return 0;
+}
+
+int cleanup_before_linux(void)
+{
+ disable_interrupts();
+ return 0;
+}
+
+int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ disable_interrupts();
+ reset_cpu(0);
+ return 0;
+}
+
+void flush_cache(unsigned long addr, unsigned long size)
+{
+
+}
+
+void icache_enable(void)
+{
+}
+
+void icache_disable(void)
+{
+}
+
+int icache_status(void)
+{
+ return 0;
+}
+
+void dcache_enable(void)
+{
+}
+
+void dcache_disable(void)
+{
+}
+
+int dcache_status(void)
+{
+ return 0;
+}
diff --git a/cpu/sh2/interrupts.c b/cpu/sh2/interrupts.c
new file mode 100644
index 0000000..fe6ff3a
--- /dev/null
+++ b/cpu/sh2/interrupts.c
@@ -0,0 +1,39 @@
+/*
+ * Copyright 2007,2008 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ * Copyright (C) 2008 Renesas Solutions Corp.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+int interrupt_init(void)
+{
+ return 0;
+}
+
+void enable_interrupts(void)
+{
+
+}
+
+int disable_interrupts(void)
+{
+ return 0;
+}
diff --git a/cpu/sh2/start.S b/cpu/sh2/start.S
new file mode 100644
index 0000000..c4fa688
--- /dev/null
+++ b/cpu/sh2/start.S
@@ -0,0 +1,78 @@
+/*
+ * Copyright (C) 2007,2008 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ * Copyright (C) 2008 Renesas Solutions Corp.
+
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <version.h>
+
+ .text
+ .align 2
+
+ .global _start
+_start:
+ .long 0x00000010 /* Ppower ON reset PC*/
+ .long 0x00000000
+ .long 0x00000010 /* Manual reset PC */
+ .long 0x00000000
+_init:
+ mov.l ._lowlevel_init, r0
+100: bsrf r0
+ nop
+ bsr 1f
+ nop
+1: sts pr, r5
+ mov.l ._reloc_dst, r4
+ add #(_start-1b), r5
+ mov.l ._reloc_dst_end, r6
+
+2: mov.l @r5+, r1
+ mov.l r1, @r4
+ add #4, r4
+ cmp/hs r6, r4
+ bf 2b
+
+ mov.l ._bss_start, r4
+ mov.l ._bss_end, r5
+ mov #0, r1
+
+3: mov.l r1, @r4 /* bss clear */
+ add #4, r4
+ cmp/hs r5, r4
+ bf 3b
+
+ mov.l ._gd_init, r13 /* global data */
+ mov.l ._stack_init, r15 /* stack */
+
+ mov.l ._sh_generic_init, r0
+ jsr @r0
+ nop
+
+loop:
+ bra loop
+
+ .align 2
+
+._lowlevel_init: .long (lowlevel_init - (100b + 4))
+._reloc_dst: .long reloc_dst
+._reloc_dst_end: .long reloc_dst_end
+._bss_start: .long bss_start
+._bss_end: .long bss_end
+._gd_init: .long (_start - CFG_GBL_DATA_SIZE)
+._stack_init: .long (_start - CFG_GBL_DATA_SIZE - CFG_MALLOC_LEN - 16)
+._sh_generic_init: .long sh_generic_init
diff --git a/cpu/sh2/time.c b/cpu/sh2/time.c
new file mode 100644
index 0000000..d6eb0cb
--- /dev/null
+++ b/cpu/sh2/time.c
@@ -0,0 +1,111 @@
+/*
+ * Copyright (C) 2007,2008 Nobobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ * Copyright (C) 2008 Renesas Solutions Corp.
+ *
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+
+#define CMT_CMCSR_INIT 0x0001 /* PCLK/32 */
+#define CMT_CMCSR_CALIB 0x0000
+#define CMT_MAX_COUNTER (0xFFFFFFFF)
+#define CMT_TIMER_RESET (0xFFFF)
+
+static vu_long cmt0_timer;
+
+static void cmt_timer_start(unsigned int timer)
+{
+ writew(readw(CMSTR) | 0x01, CMSTR);
+}
+
+static void cmt_timer_stop(unsigned int timer)
+{
+ writew(readw(CMSTR) & ~0x01, CMSTR);
+}
+
+int timer_init(void)
+{
+ cmt0_timer = 0;
+ /* Divide clock by 32 */
+ readw(CMCSR_0);
+ writew(CMT_CMCSR_INIT, CMCSR_0);
+
+ /* User Device 0 only */
+ cmt_timer_stop(0);
+ set_timer(CMT_TIMER_RESET);
+ cmt_timer_start(0);
+
+ return 0;
+}
+
+unsigned long long get_ticks(void)
+{
+ return cmt0_timer;
+}
+
+static vu_long cmcnt;
+ulong get_timer(ulong base)
+{
+ ulong data = readw(CMCNT_0);
+
+ if (data >= cmcnt)
+ cmcnt = data - cmcnt;
+ else
+ cmcnt = (CMT_TIMER_RESET - cmcnt) + data;
+
+ if ((cmt0_timer + cmcnt) > CMT_MAX_COUNTER)
+ cmt0_timer = ((cmt0_timer + cmcnt) - CMT_MAX_COUNTER);
+ else
+ cmt0_timer += cmcnt;
+
+ cmcnt = data;
+ return cmt0_timer - base;
+}
+
+void set_timer(ulong t)
+{
+ writew((u16) t, CMCOR_0);
+}
+
+void reset_timer(void)
+{
+ cmt_timer_stop(0);
+ set_timer(CMT_TIMER_RESET);
+ cmt0_timer = 0;
+ cmt_timer_start(0);
+}
+
+void udelay(unsigned long usec)
+{
+ unsigned int start = get_timer(0);
+
+ while (get_timer((ulong) start) < (usec * (CFG_HZ / 1000000)))
+ continue;
+}
+
+unsigned long get_tbclk(void)
+{
+ return CFG_HZ;
+}
diff --git a/cpu/sh2/watchdog.c b/cpu/sh2/watchdog.c
new file mode 100644
index 0000000..de0254b
--- /dev/null
+++ b/cpu/sh2/watchdog.c
@@ -0,0 +1,33 @@
+/*
+ * Copyright (C) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhoro@renesas.com>
+ * Copyright (C) 2008 Renesas Solutions Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+
+int watchdog_init(void)
+{
+ return 0;
+}
+
+void reset_cpu(unsigned long ignored)
+{
+ while (1)
+ ;
+}
diff --git a/doc/README.sh7785lcr b/doc/README.sh7785lcr
new file mode 100644
index 0000000..0770276
--- /dev/null
+++ b/doc/README.sh7785lcr
@@ -0,0 +1,83 @@
+========================================
+Renesas Technology R0P7785LC0011RL board
+========================================
+
+This board specification:
+=========================
+
+The R0P7785LC0011RL(board config name:sh7785lcr) has the following device:
+
+ - SH7785 (SH-4A)
+ - DDR2-SDRAM 512MB
+ - NOR Flash 64MB
+ - 2D Graphic controller
+ - SATA controller
+ - Ethernet controller
+ - USB host/peripheral controller
+ - SD controller
+ - I2C controller
+ - RTC
+
+This board has 2 physical memory maps. It can be changed with DIP switch(S2-5).
+
+ phys address | S2-5 = OFF | S2-5 = ON
+ -------------------------------+---------------+---------------
+ 0x00000000 - 0x03ffffff(CS0) | NOR Flash | NOR Flash
+ 0x04000000 - 0x05ffffff(CS1) | PLD | PLD
+ 0x06000000 - 0x07ffffff(CS1) | reserved | I2C
+ 0x08000000 - 0x0bffffff(CS2) | USB | DDR SDRAM
+ 0x0c000000 - 0x0fffffff(CS3) | SD | DDR SDRAM
+ 0x10000000 - 0x13ffffff(CS4) | SM107 | SM107
+ 0x14000000 - 0x17ffffff(CS5) | I2C | USB
+ 0x18000000 - 0x1bffffff(CS6) | reserved | SD
+ 0x40000000 - 0x5fffffff | DDR SDRAM | (cannot use)
+
+
+This board specific command:
+============================
+
+This board has the following its specific command:
+
+ - hwtest
+ - printmac
+ - setmac
+
+
+1. hwtest
+
+This is self-check command. This command has the following options:
+
+ - all : test all hardware
+ - pld : output PLD version
+ - led : turn on LEDs
+ - dipsw : test DIP switch
+ - sm107 : output SM107 version
+ - net : check RTL8110 ID
+ - sata : check SiI3512 ID
+ - net : output PCI slot device ID
+
+i.e)
+=> hwtest led
+turn on LEDs 3, 5, 7, 9
+turn on LEDs 4, 6, 8, 10
+
+=> hwtest net
+Ethernet OK
+
+
+2. printmac
+
+This command outputs MAC address of this board.
+
+i.e)
+=> printmac
+MAC = 00:00:87:**:**:**
+
+
+3. setmac
+
+This command writes MAC address of this board.
+
+i.e)
+=> setmac 00:00:87:**:**:**
+
diff --git a/drivers/serial/serial_sh.c b/drivers/serial/serial_sh.c
index 2b9eeed..61c2b82 100644
--- a/drivers/serial/serial_sh.c
+++ b/drivers/serial/serial_sh.c
@@ -20,14 +20,20 @@
#include <common.h>
#include <asm/processor.h>
-#if defined (CONFIG_CONS_SCIF0)
-#define SCIF_BASE SCIF0_BASE
-#elif defined (CONFIG_CONS_SCIF1)
-#define SCIF_BASE SCIF1_BASE
-#elif defined (CONFIG_CONS_SCIF2)
-#define SCIF_BASE SCIF2_BASE
+#if defined(CONFIG_CONS_SCIF0)
+# define SCIF_BASE SCIF0_BASE
+#elif defined(CONFIG_CONS_SCIF1)
+# define SCIF_BASE SCIF1_BASE
+#elif defined(CONFIG_CONS_SCIF2)
+# define SCIF_BASE SCIF2_BASE
+#elif defined(CONFIG_CONS_SCIF3)
+# define SCIF_BASE SCIF3_BASE
+#elif defined(CONFIG_CONS_SCIF4)
+# define SCIF_BASE SCIF4_BASE
+#elif defined(CONFIG_CONS_SCIF5)
+# define SCIF_BASE SCIF5_BASE
#else
-#error "Default SCIF doesn't set....."
+# error "Default SCIF doesn't set....."
#endif
/* Base register */
@@ -36,7 +42,8 @@
#define SCSCR (vu_short *)(SCIF_BASE + 0x8)
#define SCFCR (vu_short *)(SCIF_BASE + 0x18)
#define SCFDR (vu_short *)(SCIF_BASE + 0x1C)
-#ifdef CONFIG_CPU_SH7720 /* SH7720 specific */
+#if defined(CONFIG_CPU_SH7720) || \
+ (defined(CONFIG_CPU_SH7723) && defined(CONFIG_SCIF_A))
# define SCFSR (vu_short *)(SCIF_BASE + 0x14) /* SCSSR */
# define SCFTDR (vu_char *)(SCIF_BASE + 0x20)
# define SCFRDR (vu_char *)(SCIF_BASE + 0x24)
@@ -55,7 +62,7 @@
# define LSR_ORER 1
# define FIFOLEVEL_MASK 0xFF
#elif defined(CONFIG_CPU_SH7763)
-# if defined (CONFIG_CONS_SCIF2)
+# if defined(CONFIG_CONS_SCIF2)
# define SCSPTR (vu_short *)(SCIF_BASE + 0x20)
# define SCLSR (vu_short *)(SCIF_BASE + 0x24)
# define LSR_ORER 1
@@ -68,9 +75,20 @@
# define LSR_ORER 1
# define FIFOLEVEL_MASK 0xFF
# endif
+#elif defined(CONFIG_CPU_SH7723)
+# if defined(CONIFG_SCIF_A)
+# define SCLSR SCFSR
+# define LSR_ORER 0x0200
+# define FIFOLEVEL_MASK 0x3F
+#else
+# define SCLSR (vu_short *)(SCIF_BASE + 0x24)
+# define LSR_ORER 1
+# define FIFOLEVEL_MASK 0x1F
+#endif
#elif defined(CONFIG_CPU_SH7750) || \
defined(CONFIG_CPU_SH7751) || \
- defined(CONFIG_CPU_SH7722)
+ defined(CONFIG_CPU_SH7722) || \
+ defined(CONFIG_CPU_SH7203)
# define SCSPTR (vu_short *)(SCIF_BASE + 0x20)
# define SCLSR (vu_short *)(SCIF_BASE + 0x24)
# define LSR_ORER 1
@@ -89,6 +107,9 @@
/* SCBRR register value setting */
#if defined(CONFIG_CPU_SH7720)
# define SCBRR_VALUE(bps, clk) (((clk*2)+16*bps)/(32*bps)-1)
+#elif defined(CONFIG_CPU_SH7723) && defined(CONFIG_SCIF_A)
+/* SH7723 SCIFA use bus clock. So clock *2 */
+# define SCBRR_VALUE(bps, clk) (((clk*2*2)+16*bps)/(32*bps)-1)
#else /* Generic SuperH */
# define SCBRR_VALUE(bps, clk) ((clk+16*bps)/(32*bps)-1)
#endif
@@ -167,7 +188,7 @@
int serial_tstc(void)
{
- return serial_rx_fifo_level()? 1 : 0;
+ return serial_rx_fifo_level() ? 1 : 0;
}
#define FSR_ERR_CLEAR 0x0063
@@ -191,14 +212,16 @@
handle_error();
if (*SCLSR & LSR_ORER)
handle_error();
- return (status & (FSR_DR | FSR_RDF));
+ return status & (FSR_DR | FSR_RDF);
}
int serial_getc(void)
{
unsigned short status;
char ch;
- while (!serial_getc_check()) ;
+
+ while (!serial_getc_check())
+ ;
ch = *SCFRDR;
status = *SCFSR;
diff --git a/examples/Makefile b/examples/Makefile
index 66b354d..b0a8853 100644
--- a/examples/Makefile
+++ b/examples/Makefile
@@ -67,6 +67,9 @@
ifeq ($(ARCH),sh)
LOAD_ADDR = 0x8C000000
+ifeq ($(CPU),sh2)
+BIG_ENDIAN=y
+endif
endif
ifeq ($(ARCH),sparc)
diff --git a/include/asm-sh/cpu_sh2.h b/include/asm-sh/cpu_sh2.h
new file mode 100644
index 0000000..8bc9bc6
--- /dev/null
+++ b/include/asm-sh/cpu_sh2.h
@@ -0,0 +1,40 @@
+/*
+ * Copyright (C) 2007,2008 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ * Copyright (C) 2008 Renesas Solutions Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _ASM_CPU_SH2_H_
+#define _ASM_CPU_SH2_H_
+
+/* cache control */
+#define CCR_CACHE_STOP 0x00000008
+#define CCR_CACHE_ENABLE 0x00000005
+#define CCR_CACHE_ICI 0x00000008
+
+#define CACHE_OC_ADDRESS_ARRAY 0xf0000000
+#define CACHE_OC_WAY_SHIFT 13
+#define CACHE_OC_NUM_ENTRIES 256
+#define CACHE_OC_ENTRY_SHIFT 4
+
+#if defined(CONFIG_CPU_SH7203)
+# include <asm/cpu_sh7203.h>
+#else
+# error "Unknown SH2 variant"
+#endif
+
+#endif /* _ASM_CPU_SH2_H_ */
diff --git a/include/asm-sh/cpu_sh4.h b/include/asm-sh/cpu_sh4.h
index 5a8a5a1..b6cc6cf 100644
--- a/include/asm-sh/cpu_sh4.h
+++ b/include/asm-sh/cpu_sh4.h
@@ -35,10 +35,14 @@
# include <asm/cpu_sh7750.h>
#elif defined (CONFIG_CPU_SH7722)
# include <asm/cpu_sh7722.h>
+#elif defined (CONFIG_CPU_SH7723)
+# include <asm/cpu_sh7723.h>
#elif defined (CONFIG_CPU_SH7763)
# include <asm/cpu_sh7763.h>
#elif defined (CONFIG_CPU_SH7780)
# include <asm/cpu_sh7780.h>
+#elif defined (CONFIG_CPU_SH7785)
+# include <asm/cpu_sh7785.h>
#else
# error "Unknown SH4 variant"
#endif
diff --git a/include/asm-sh/cpu_sh7203.h b/include/asm-sh/cpu_sh7203.h
new file mode 100644
index 0000000..77dcac4
--- /dev/null
+++ b/include/asm-sh/cpu_sh7203.h
@@ -0,0 +1,41 @@
+#ifndef _ASM_CPU_SH7203_H_
+#define _ASM_CPU_SH7203_H_
+
+/* Cache */
+#define CCR1 0xFFFC1000
+#define CCR CCR1
+
+/* PFC */
+#define PACR 0xA4050100
+#define PBCR 0xA4050102
+#define PCCR 0xA4050104
+#define PETCR 0xA4050106
+
+/* Port Data Registers */
+#define PADR 0xA4050120
+#define PBDR 0xA4050122
+#define PCDR 0xA4050124
+
+/* BSC */
+
+/* SDRAM controller */
+
+/* SCIF */
+#define SCSMR_0 0xFFFE8000
+#define SCIF0_BASE SCSMR_0
+
+/* Timer(CMT) */
+#define CMSTR 0xFFFEC000
+#define CMCSR_0 0xFFFEC002
+#define CMCNT_0 0xFFFEC004
+#define CMCOR_0 0xFFFEC006
+#define CMCSR_1 0xFFFEC008
+#define CMCNT_1 0xFFFEC00A
+#define CMCOR_1 0xFFFEC00C
+
+/* On chip oscillator circuits */
+#define FRQCR 0xA415FF80
+#define WTCNT 0xA415FF84
+#define WTCSR 0xA415FF86
+
+#endif /* _ASM_CPU_SH7203_H_ */
diff --git a/include/asm-sh/cpu_sh7723.h b/include/asm-sh/cpu_sh7723.h
new file mode 100644
index 0000000..6dac6e9
--- /dev/null
+++ b/include/asm-sh/cpu_sh7723.h
@@ -0,0 +1,209 @@
+/*
+ * (C) Copyright 2008 Renesas Solutions Corp.
+ *
+ * SH7723 Internal I/O register
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _ASM_CPU_SH7723_H_
+#define _ASM_CPU_SH7723_H_
+
+#define CACHE_OC_NUM_WAYS 4
+#define CCR_CACHE_INIT 0x0000090d
+
+/* EXP */
+#define TRA 0xFF000020
+#define EXPEVT 0xFF000024
+#define INTEVT 0xFF000028
+
+/* MMU */
+#define PTEH 0xFF000000
+#define PTEL 0xFF000004
+#define TTB 0xFF000008
+#define TEA 0xFF00000C
+#define MMUCR 0xFF000010
+#define PASCR 0xFF000070
+#define IRMCR 0xFF000078
+
+/* CACHE */
+#define CCR 0xFF00001C
+#define RAMCR 0xFF000074
+
+/* INTC */
+
+/* BSC */
+#define CMNCR 0xFEC10000
+#define CS0BCR 0xFEC10004
+#define CS2BCR 0xFEC10008
+#define CS4BCR 0xFEC10010
+#define CS5ABCR 0xFEC10014
+#define CS5BBCR 0xFEC10018
+#define CS6ABCR 0xFEC1001C
+#define CS6BBCR 0xFEC10020
+#define CS0WCR 0xFEC10024
+#define CS2WCR 0xFEC10028
+#define CS4WCR 0xFEC10030
+#define CS5AWCR 0xFEC10034
+#define CS5BWCR 0xFEC10038
+#define CS6AWCR 0xFEC1003C
+#define CS6BWCR 0xFEC10040
+#define RBWTCNT 0xFEC10054
+
+/* SBSC */
+#define SBSC_SDCR 0xFE400008
+#define SBSC_SDWCR 0xFE40000C
+#define SBSC_SDPCR 0xFE400010
+#define SBSC_RTCSR 0xFE400014
+#define SBSC_RTCNT 0xFE400018
+#define SBSC_RTCOR 0xFE40001C
+#define SBSC_RFCR 0xFE400020
+
+/* DMAC */
+
+/* CPG */
+#define FRQCR 0xA4150000
+#define VCLKCR 0xA4150004
+#define SCLKACR 0xA4150008
+#define SCLKBCR 0xA415000C
+#define IRDACLKCR 0xA4150018
+#define PLLCR 0xA4150024
+#define DLLFRQ 0xA4150050
+
+/* LOW POWER MODE */
+#define STBCR 0xA4150020
+#define MSTPCR0 0xA4150030
+#define MSTPCR1 0xA4150034
+#define MSTPCR2 0xA4150038
+
+/* RWDT */
+#define RWTCNT 0xA4520000
+#define RWTCSR 0xA4520004
+#define WTCNT RWTCNT
+
+/* TMU */
+#define TSTR 0xFFD80004
+#define TCOR0 0xFFD80008
+#define TCNT0 0xFFD8000C
+#define TCR0 0xFFD80010
+#define TCOR1 0xFFD80014
+#define TCNT1 0xFFD80018
+#define TCR1 0xFFD8001C
+#define TCOR2 0xFFD80020
+#define TCNT2 0xFFD80024
+#define TCR2 0xFFD80028
+
+/* TPU */
+
+/* CMT */
+#define CMSTR 0xA44A0000
+#define CMCSR 0xA44A0060
+#define CMCNT 0xA44A0064
+#define CMCOR 0xA44A0068
+
+/* MSIOF */
+
+/* SCIF */
+#define SCIF0_BASE 0xFFE00000
+#define SCIF1_BASE 0xFFE10000
+#define SCIF2_BASE 0xFFE20000
+#define SCIF3_BASE 0xa4e30000
+#define SCIF4_BASE 0xa4e40000
+#define SCIF5_BASE 0xa4e50000
+
+/* RTC */
+/* IrDA */
+/* KEYSC */
+/* USB */
+/* IIC */
+/* FLCTL */
+/* VPU */
+/* VIO(CEU) */
+/* VIO(VEU) */
+/* VIO(BEU) */
+/* 2DG */
+/* LCDC */
+/* VOU */
+/* TSIF */
+/* SIU */
+/* ATAPI */
+
+/* PFC */
+#define PACR 0xA4050100
+#define PBCR 0xA4050102
+#define PCCR 0xA4050104
+#define PDCR 0xA4050106
+#define PECR 0xA4050108
+#define PFCR 0xA405010A
+#define PGCR 0xA405010C
+#define PHCR 0xA405010E
+#define PJCR 0xA4050110
+#define PKCR 0xA4050112
+#define PLCR 0xA4050114
+#define PMCR 0xA4050116
+#define PNCR 0xA4050118
+#define PQCR 0xA405011A
+#define PRCR 0xA405011C
+#define PSCR 0xA405011E
+#define PTCR 0xA4050140
+#define PUCR 0xA4050142
+#define PVCR 0xA4050144
+#define PWCR 0xA4050146
+#define PXCR 0xA4050148
+#define PYCR 0xA405014A
+#define PZCR 0xA405014C
+#define PSELA 0xA405014E
+#define PSELB 0xA4050150
+#define PSELC 0xA4050152
+#define PSELD 0xA4050154
+#define HIZCRA 0xA4050158
+#define HIZCRB 0xA405015A
+#define HIZCRC 0xA405015C
+#define HIZCRD 0xA405015E
+#define MSELCRA 0xA4050180
+#define MSELCRB 0xA4050182
+#define PULCR 0xA4050184
+#define DRVCRA 0xA405018A
+#define DRVCRB 0xA405018C
+
+/* I/O Port */
+#define PADR 0xA4050120
+#define PBDR 0xA4050122
+#define PCDR 0xA4050124
+#define PDDR 0xA4050126
+#define PEDR 0xA4050128
+#define PFDR 0xA405012A
+#define PGDR 0xA405012C
+#define PHDR 0xA405012E
+#define PJDR 0xA4050130
+#define PKDR 0xA4050132
+#define PLDR 0xA4050134
+#define PMDR 0xA4050136
+#define PNDR 0xA4050138
+#define PQDR 0xA405013A
+#define PRDR 0xA405013C
+#define PSDR 0xA405013E
+#define PTDR 0xA4050160
+#define PUDR 0xA4050162
+#define PVDR 0xA4050164
+#define PWDR 0xA4050166
+#define PYDR 0xA4050168
+#define PZDR 0xA405016A
+
+/* UBC */
+/* H-UDI */
+
+#endif /* _ASM_CPU_SH7723_H_ */
diff --git a/include/asm-sh/cpu_sh7785.h b/include/asm-sh/cpu_sh7785.h
new file mode 100644
index 0000000..4a4dfc9
--- /dev/null
+++ b/include/asm-sh/cpu_sh7785.h
@@ -0,0 +1,156 @@
+#ifndef _ASM_CPU_SH7785_H_
+#define _ASM_CPU_SH7785_H_
+
+/*
+ * Copyright (c) 2007,2008 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ * Copyright (c) 2008 Yusuke Goda <goda.yusuke@renesas.com>
+ * Copyright (c) 2008 Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#define CACHE_OC_NUM_WAYS 1
+#define CCR_CACHE_INIT 0x0000090b
+
+/* Exceptions */
+#define TRA 0xFF000020
+#define EXPEVT 0xFF000024
+#define INTEVT 0xFF000028
+
+/* Cache Controller */
+#define CCR 0xFF00001C
+#define QACR0 0xFF000038
+#define QACR1 0xFF00003C
+#define RAMCR 0xFF000074
+
+/* Watchdog Timer and Reset */
+#define WTCNT WDTCNT
+#define WDTST 0xFFCC0000
+#define WDTCSR 0xFFCC0004
+#define WDTBST 0xFFCC0008
+#define WDTCNT 0xFFCC0010
+#define WDTBCNT 0xFFCC0018
+
+/* Timer Unit */
+#define TSTR TSTR0
+#define TOCR 0xFFD80000
+#define TSTR0 0xFFD80004
+#define TCOR0 0xFFD80008
+#define TCNT0 0xFFD8000C
+#define TCR0 0xFFD80010
+#define TCOR1 0xFFD80014
+#define TCNT1 0xFFD80018
+#define TCR1 0xFFD8001C
+#define TCOR2 0xFFD80020
+#define TCNT2 0xFFD80024
+#define TCR2 0xFFD80028
+#define TCPR2 0xFFD8002C
+#define TSTR1 0xFFDC0004
+#define TCOR3 0xFFDC0008
+#define TCNT3 0xFFDC000C
+#define TCR3 0xFFDC0010
+#define TCOR4 0xFFDC0014
+#define TCNT4 0xFFDC0018
+#define TCR4 0xFFDC001C
+#define TCOR5 0xFFDC0020
+#define TCNT5 0xFFDC0024
+#define TCR5 0xFFDC0028
+
+/* Serial Communication Interface with FIFO */
+#define SCIF1_BASE 0xffeb0000
+
+/* LBSC */
+#define MMSELR 0xfc400020
+#define LBSC_BASE 0xff800000
+#define BCR (LBSC_BASE + 0x1000)
+#define CS0BCR (LBSC_BASE + 0x2000)
+#define CS1BCR (LBSC_BASE + 0x2010)
+#define CS2BCR (LBSC_BASE + 0x2020)
+#define CS3BCR (LBSC_BASE + 0x2030)
+#define CS4BCR (LBSC_BASE + 0x2040)
+#define CS5BCR (LBSC_BASE + 0x2050)
+#define CS6BCR (LBSC_BASE + 0x2060)
+#define CS0WCR (LBSC_BASE + 0x2008)
+#define CS1WCR (LBSC_BASE + 0x2018)
+#define CS2WCR (LBSC_BASE + 0x2028)
+#define CS3WCR (LBSC_BASE + 0x2038)
+#define CS4WCR (LBSC_BASE + 0x2048)
+#define CS5WCR (LBSC_BASE + 0x2058)
+#define CS6WCR (LBSC_BASE + 0x2068)
+#define CS5PCR (LBSC_BASE + 0x2070)
+#define CS6PCR (LBSC_BASE + 0x2080)
+
+/* PCI Controller */
+#define SH7780_PCIECR 0xFE000008
+#define SH7780_PCIVID 0xFE040000
+#define SH7780_PCIDID 0xFE040002
+#define SH7780_PCICMD 0xFE040004
+#define SH7780_PCISTATUS 0xFE040006
+#define SH7780_PCIRID 0xFE040008
+#define SH7780_PCIPIF 0xFE040009
+#define SH7780_PCISUB 0xFE04000A
+#define SH7780_PCIBCC 0xFE04000B
+#define SH7780_PCICLS 0xFE04000C
+#define SH7780_PCILTM 0xFE04000D
+#define SH7780_PCIHDR 0xFE04000E
+#define SH7780_PCIBIST 0xFE04000F
+#define SH7780_PCIIBAR 0xFE040010
+#define SH7780_PCIMBAR0 0xFE040014
+#define SH7780_PCIMBAR1 0xFE040018
+#define SH7780_PCISVID 0xFE04002C
+#define SH7780_PCISID 0xFE04002E
+#define SH7780_PCICP 0xFE040034
+#define SH7780_PCIINTLINE 0xFE04003C
+#define SH7780_PCIINTPIN 0xFE04003D
+#define SH7780_PCIMINGNT 0xFE04003E
+#define SH7780_PCIMAXLAT 0xFE04003F
+#define SH7780_PCICID 0xFE040040
+#define SH7780_PCINIP 0xFE040041
+#define SH7780_PCIPMC 0xFE040042
+#define SH7780_PCIPMCSR 0xFE040044
+#define SH7780_PCIPMCSRBSE 0xFE040046
+#define SH7780_PCI_CDD 0xFE040047
+#define SH7780_PCICR 0xFE040100
+#define SH7780_PCILSR0 0xFE040104
+#define SH7780_PCILSR1 0xFE040108
+#define SH7780_PCILAR0 0xFE04010C
+#define SH7780_PCILAR1 0xFE040110
+#define SH7780_PCIIR 0xFE040114
+#define SH7780_PCIIMR 0xFE040118
+#define SH7780_PCIAIR 0xFE04011C
+#define SH7780_PCICIR 0xFE040120
+#define SH7780_PCIAINT 0xFE040130
+#define SH7780_PCIAINTM 0xFE040134
+#define SH7780_PCIBMIR 0xFE040138
+#define SH7780_PCIPAR 0xFE0401C0
+#define SH7780_PCIPINT 0xFE0401CC
+#define SH7780_PCIPINTM 0xFE0401D0
+#define SH7780_PCIMBR0 0xFE0401E0
+#define SH7780_PCIMBMR0 0xFE0401E4
+#define SH7780_PCIMBR1 0xFE0401E8
+#define SH7780_PCIMBMR1 0xFE0401EC
+#define SH7780_PCIMBR2 0xFE0401F0
+#define SH7780_PCIMBMR2 0xFE0401F4
+#define SH7780_PCIIOBR 0xFE0401F8
+#define SH7780_PCIIOBMR 0xFE0401FC
+#define SH7780_PCICSCR0 0xFE040210
+#define SH7780_PCICSCR1 0xFE040214
+#define SH7780_PCICSAR0 0xFE040218
+#define SH7780_PCICSAR1 0xFE04021C
+#define SH7780_PCIPDR 0xFE040220
+
+#endif /* _ASM_CPU_SH7780_H_ */
diff --git a/include/asm-sh/processor.h b/include/asm-sh/processor.h
index 388aa69..938a89c 100644
--- a/include/asm-sh/processor.h
+++ b/include/asm-sh/processor.h
@@ -1,6 +1,9 @@
#ifndef _ASM_SH_PROCESSOR_H_
#define _ASM_SH_PROCESSOR_H_
-#if defined CONFIG_SH3
+#if defined(CONFIG_SH2) || \
+ defined (CONFIG_SH2A)
+# include <asm/cpu_sh2.h>
+#elif defined (CONFIG_SH3)
# include <asm/cpu_sh3.h>
#elif defined (CONFIG_SH4) || \
defined (CONFIG_SH4A)
diff --git a/include/configs/ap325rxa.h b/include/configs/ap325rxa.h
new file mode 100644
index 0000000..81a118d
--- /dev/null
+++ b/include/configs/ap325rxa.h
@@ -0,0 +1,177 @@
+/*
+ * Configuation settings for the Renesas Solutions AP-325RXA board
+ *
+ * Copyright (C) 2008 Renesas Solutions Corp.
+ * Copyright (C) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __AP325RXA_H
+#define __AP325RXA_H
+
+#undef DEBUG
+#define CONFIG_SH 1
+#define CONFIG_SH4 1
+#define CONFIG_CPU_SH7723 1
+#define CONFIG_AP325RXA 1
+
+#define CONFIG_CMD_LOADB
+#define CONFIG_CMD_LOADS
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_EXT2
+#define CONFIG_DOS_PARTITION
+
+#define CONFIG_BAUDRATE 38400
+#define CONFIG_BOOTDELAY 3
+#define CONFIG_BOOTARGS "console=ttySC2,38400"
+
+#define CONFIG_VERSION_VARIABLE
+#undef CONFIG_SHOW_BOOT_PROGRESS
+
+/* SMC9118 */
+#define CONFIG_DRIVER_SMC911X 1
+#define CONFIG_DRIVER_SMC911X_32_BIT 1
+#define CONFIG_DRIVER_SMC911X_BASE 0xB6080000
+
+/* MEMORY */
+#define AP325RXA_SDRAM_BASE (0x88000000)
+#define AP325RXA_FLASH_BASE_1 (0xA0000000)
+#define AP325RXA_FLASH_BANK_SIZE (128 * 1024 * 1024)
+
+/* undef to save memory */
+#define CFG_LONGHELP
+/* Monitor Command Prompt */
+#define CFG_PROMPT "=> "
+/* Buffer size for input from the Console */
+#define CFG_CBSIZE 256
+/* Buffer size for Console output */
+#define CFG_PBSIZE 256
+/* max args accepted for monitor commands */
+#define CFG_MAXARGS 16
+/* Buffer size for Boot Arguments passed to kernel */
+#define CFG_BARGSIZE 512
+/* List of legal baudrate settings for this board */
+#define CFG_BAUDRATE_TABLE { 38400 }
+
+/* SCIF */
+#define CONFIG_SCIF_CONSOLE 1
+#define CONFIG_SCIF_A 1 /* SH7723 has SCIF and SCIFA */
+#define CONFIG_CONS_SCIF5 1
+
+/* Suppress display of console information at boot */
+#undef CFG_CONSOLE_INFO_QUIET
+#undef CFG_CONSOLE_OVERWRITE_ROUTINE
+#undef CFG_CONSOLE_ENV_OVERWRITE
+
+#define CFG_MEMTEST_START (AP325RXA_SDRAM_BASE)
+#define CFG_MEMTEST_END (CFG_MEMTEST_START + (60 * 1024 * 1024))
+
+/* Enable alternate, more extensive, memory test */
+#undef CFG_ALT_MEMTEST
+/* Scratch address used by the alternate memory test */
+#undef CFG_MEMTEST_SCRATCH
+
+/* Enable temporary baudrate change while serial download */
+#undef CFG_LOADS_BAUD_CHANGE
+
+#define CFG_SDRAM_BASE (AP325RXA_SDRAM_BASE)
+/* maybe more, but if so u-boot doesn't know about it... */
+#define CFG_SDRAM_SIZE (128 * 1024 * 1024)
+/* default load address for scripts ?!? */
+#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 16 * 1024 * 1024)
+
+/* Address of u-boot image in Flash (NOT run time address in SDRAM) ?!? */
+#define CFG_MONITOR_BASE (AP325RXA_FLASH_BASE_1)
+/* Monitor size */
+#define CFG_MONITOR_LEN (128 * 1024)
+/* Size of DRAM reserved for malloc() use */
+#define CFG_MALLOC_LEN (256 * 1024)
+/* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_SIZE (256)
+#define CFG_BOOTMAPSZ (8 * 1024 * 1024)
+
+/* FLASH */
+#define CONFIG_FLASH_CFI_DRIVER 1
+#define CFG_FLASH_CFI
+#define CFG_FLASH_CFI_DRIVER
+#undef CFG_FLASH_QUIET_TEST
+/* print 'E' for empty sector on flinfo */
+#define CFG_FLASH_EMPTY_INFO
+/* Physical start address of Flash memory */
+#define CFG_FLASH_BASE (AP325RXA_FLASH_BASE_1)
+/* Max number of sectors on each Flash chip */
+#define CFG_MAX_FLASH_SECT 512
+
+/*
+ * IDE support
+ */
+#define CONFIG_IDE_RESET 1
+#define CFG_PIO_MODE 1
+#define CFG_IDE_MAXBUS 1 /* IDE bus */
+#define CFG_IDE_MAXDEVICE 1
+#define CFG_ATA_BASE_ADDR 0xB4180000
+#define CFG_ATA_STRIDE 2 /* 1bit shift */
+#define CFG_ATA_DATA_OFFSET 0x200 /* data reg offset */
+#define CFG_ATA_REG_OFFSET 0x200 /* reg offset */
+#define CFG_ATA_ALT_OFFSET 0x210 /* alternate register offset */
+
+/* if you use all NOR Flash , you change dip-switch. Please see Manual. */
+#define CFG_MAX_FLASH_BANKS 1
+#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE + (0 * AP325RXA_FLASH_BANK_SIZE)}
+
+/* Timeout for Flash erase operations (in ms) */
+#define CFG_FLASH_ERASE_TOUT (3 * 1000)
+/* Timeout for Flash write operations (in ms) */
+#define CFG_FLASH_WRITE_TOUT (3 * 1000)
+/* Timeout for Flash set sector lock bit operations (in ms) */
+#define CFG_FLASH_LOCK_TOUT (3 * 1000)
+/* Timeout for Flash clear lock bit operations (in ms) */
+#define CFG_FLASH_UNLOCK_TOUT (3 * 1000)
+
+/*
+ * Use hardware flash sectors protection instead
+ * of U-Boot software protection
+ */
+#undef CFG_FLASH_PROTECTION
+#undef CFG_DIRECT_FLASH_TFTP
+
+/* ENV setting */
+#define CFG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_OVERWRITE 1
+#define CFG_ENV_SECT_SIZE (128 * 1024)
+#define CFG_ENV_SIZE (CFG_ENV_SECT_SIZE)
+#define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_MONITOR_LEN)
+/* Offset of env Flash sector relative to CFG_FLASH_BASE */
+#define CFG_ENV_OFFSET (CFG_ENV_ADDR - CFG_FLASH_BASE)
+#define CFG_ENV_SIZE_REDUND (CFG_ENV_SECT_SIZE)
+
+/* Board Clock */
+#define CONFIG_SYS_CLK_FREQ 33333333
+#define TMU_CLK_DIVIDER (4) /* 4 (default), 16, 64, 256 or 1024 */
+#define CFG_HZ (CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER)
+
+#endif /* __AP325RXA_H */
diff --git a/include/configs/rsk7203.h b/include/configs/rsk7203.h
new file mode 100644
index 0000000..23598f3
--- /dev/null
+++ b/include/configs/rsk7203.h
@@ -0,0 +1,107 @@
+/*
+ * Configuation settings for the Renesas Technology RSK 7203
+ *
+ * Copyright (C) 2008 Nobuhiro Iwamatsu
+ * Copyright (C) 2008 Renesas Solutions Corp.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __RSK7203_H
+#define __RSK7203_H
+
+#undef DEBUG
+#define CONFIG_SH 1
+#define CONFIG_SH2 1
+#define CONFIG_SH2A 1
+#define CONFIG_CPU_SH7203 1
+#define CONFIG_RSK7203 1
+
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_CACHE
+
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_BOOTARGS "console=ttySC0,115200"
+#define CONFIG_LOADADDR 0x0C100000 /* RSK7203_SDRAM_BASE + 1MB */
+
+#define CONFIG_VERSION_VARIABLE
+#undef CONFIG_SHOW_BOOT_PROGRESS
+
+/* MEMORY */
+#define RSK7203_SDRAM_BASE 0x0C000000
+#define RSK7203_FLASH_BASE_1 0x20000000 /* Non cache */
+#define RSK7203_FLASH_BANK_SIZE (4 * 1024 * 1024)
+
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#define CFG_CBSIZE 256 /* Buffer size for input from the Console */
+#define CFG_PBSIZE 256 /* Buffer size for Console output */
+#define CFG_MAXARGS 16 /* max args accepted for monitor commands */
+/* Buffer size for Boot Arguments passed to kernel */
+#define CFG_BARGSIZE 512
+/* List of legal baudrate settings for this board */
+#define CFG_BAUDRATE_TABLE { 115200 }
+
+/* SCIF */
+#define CONFIG_SCIF_CONSOLE 1
+#define CONFIG_CONS_SCIF0 1
+
+#define CFG_MEMTEST_START RSK7203_SDRAM_BASE
+#define CFG_MEMTEST_END (CFG_MEMTEST_START + (3 * 1024 * 1024))
+
+#define CFG_SDRAM_BASE RSK7203_SDRAM_BASE
+#define CFG_SDRAM_SIZE (32 * 1024 * 1024)
+
+#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 1024 * 1024)
+#define CFG_MONITOR_BASE RSK7203_FLASH_BASE_1
+#define CFG_MONITOR_LEN (128 * 1024)
+#define CFG_MALLOC_LEN (256 * 1024)
+#define CFG_GBL_DATA_SIZE 256
+#define CFG_BOOTMAPSZ (8 * 1024 * 1024)
+
+/* FLASH */
+#define CONFIG_FLASH_CFI_DRIVER
+#define CFG_FLASH_CFI
+#define CFG_FLASH_CFI_WIDTH FLASH_CFI_16BIT
+#undef CFG_FLASH_QUIET_TEST
+#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
+#define CFG_FLASH_BASE RSK7203_FLASH_BASE_1
+#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE }
+#define CFG_MAX_FLASH_SECT 64
+#define CFG_MAX_FLASH_BANKS 1
+
+#define CFG_ENV_IS_IN_FLASH
+#define CFG_ENV_SECT_SIZE (64 * 1024)
+#define CFG_ENV_SIZE CFG_ENV_SECT_SIZE
+#define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
+#define CFG_FLASH_ERASE_TOUT 12000
+#define CFG_FLASH_WRITE_TOUT 500
+
+/* Board Clock */
+#define CONFIG_SYS_CLK_FREQ 33333333
+#define CMT_CLK_DIVIDER 32 /* 8 (default), 32, 128 or 512 */
+#define CFG_HZ (CONFIG_SYS_CLK_FREQ / CMT_CLK_DIVIDER)
+
+#endif /* __RSK7203_H */
diff --git a/include/configs/sh7785lcr.h b/include/configs/sh7785lcr.h
new file mode 100644
index 0000000..efdb163
--- /dev/null
+++ b/include/configs/sh7785lcr.h
@@ -0,0 +1,167 @@
+/*
+ * Configuation settings for the Renesas Technology R0P7785LC0011RL board
+ *
+ * Copyright (C) 2008 Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __SH7785LCR_H
+#define __SH7785LCR_H
+
+#undef DEBUG
+#define CONFIG_SH 1
+#define CONFIG_SH4A 1
+#define CONFIG_CPU_SH7785 1
+#define CONFIG_SH7785LCR 1
+
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_DFL
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_RUN
+#define CONFIG_CMD_ENV
+
+#define CONFIG_CMD_USB
+#define CONFIG_USB_STORAGE
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_DOS_PARTITION
+#define CONFIG_MAC_PARTITION
+
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_BOOTDELAY 3
+#define CONFIG_BOOTARGS "console=ttySC1,115200 root=/dev/nfs ip=dhcp"
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "bootdevice=0:1\0" \
+ "usbload=usb reset;usbboot;usb stop;bootm\0"
+
+#define CONFIG_VERSION_VARIABLE
+#undef CONFIG_SHOW_BOOT_PROGRESS
+
+/* MEMORY */
+#define SH7785LCR_SDRAM_BASE (0x08000000)
+#define SH7785LCR_SDRAM_SIZE (128 * 1024 * 1024)
+#define SH7785LCR_FLASH_BASE_1 (0xa0000000)
+#define SH7785LCR_FLASH_BANK_SIZE (64 * 1024 * 1024)
+#define SH7785LCR_USB_BASE (0xb4000000)
+
+#define CFG_LONGHELP
+#define CFG_PROMPT "=> "
+#define CFG_CBSIZE 256
+#define CFG_PBSIZE 256
+#define CFG_MAXARGS 16
+#define CFG_BARGSIZE 512
+#define CFG_BAUDRATE_TABLE { 115200 }
+
+/* SCIF */
+#define CONFIG_SCIF_CONSOLE 1
+#define CONFIG_CONS_SCIF1 1
+#define CONFIG_SCIF_EXT_CLOCK 1
+#undef CFG_CONSOLE_INFO_QUIET
+#undef CFG_CONSOLE_OVERWRITE_ROUTINE
+#undef CFG_CONSOLE_ENV_OVERWRITE
+
+
+#define CFG_MEMTEST_START (SH7785LCR_SDRAM_BASE)
+#define CFG_MEMTEST_END (CFG_MEMTEST_START + \
+ (SH7785LCR_SDRAM_SIZE) - \
+ 4 * 1024 * 1024)
+#undef CFG_ALT_MEMTEST
+#undef CFG_MEMTEST_SCRATCH
+#undef CFG_LOADS_BAUD_CHANGE
+
+#define CFG_SDRAM_BASE (SH7785LCR_SDRAM_BASE)
+#define CFG_SDRAM_SIZE (SH7785LCR_SDRAM_SIZE)
+#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 16 * 1024 * 1024)
+
+#define CFG_MONITOR_BASE (SH7785LCR_FLASH_BASE_1)
+#define CFG_MONITOR_LEN (512 * 1024)
+#define CFG_MALLOC_LEN (512 * 1024)
+#define CFG_GBL_DATA_SIZE (256)
+#define CFG_BOOTMAPSZ (8 * 1024 * 1024)
+
+/* FLASH */
+#define CONFIG_FLASH_CFI_DRIVER
+#define CFG_FLASH_CFI
+#undef CFG_FLASH_QUIET_TEST
+#define CFG_FLASH_EMPTY_INFO
+#define CFG_FLASH_BASE (SH7785LCR_FLASH_BASE_1)
+#define CFG_MAX_FLASH_SECT 512
+
+#define CFG_MAX_FLASH_BANKS 1
+#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE + \
+ (0 * SH7785LCR_FLASH_BANK_SIZE) }
+
+#define CFG_FLASH_ERASE_TOUT (3 * 1000)
+#define CFG_FLASH_WRITE_TOUT (3 * 1000)
+#define CFG_FLASH_LOCK_TOUT (3 * 1000)
+#define CFG_FLASH_UNLOCK_TOUT (3 * 1000)
+
+#undef CFG_FLASH_PROTECTION
+#undef CFG_DIRECT_FLASH_TFTP
+
+/* R8A66597 */
+#define LITTLEENDIAN /* for include/usb.h */
+#define CONFIG_USB_R8A66597_HCD
+#define CONFIG_R8A66597_BASE_ADDR SH7785LCR_USB_BASE
+#define CONFIG_R8A66597_XTAL 0x0000 /* 12MHz */
+#define CONFIG_R8A66597_LDRV 0x8000 /* 3.3V */
+#define CONFIG_R8A66597_ENDIAN 0x0000 /* little */
+
+/* PCI Controller */
+#define CONFIG_PCI
+#define CONFIG_SH4_PCI
+#define CONFIG_SH7780_PCI
+#define CONFIG_PCI_PNP
+#define CONFIG_PCI_SCAN_SHOW 1
+
+#define CONFIG_PCI_MEM_BUS 0xFD000000 /* Memory space base addr */
+#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS
+#define CONFIG_PCI_MEM_SIZE 0x01000000 /* Size of Memory window */
+
+#define CONFIG_PCI_IO_BUS 0xFE200000 /* IO space base address */
+#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS
+#define CONFIG_PCI_IO_SIZE 0x00200000 /* Size of IO window */
+
+/* Network device (RTL8169) support */
+#define CONFIG_NET_MULTI
+#define CONFIG_RTL8169
+
+/* ENV setting */
+#define CFG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_OVERWRITE 1
+#define CFG_ENV_SECT_SIZE (256 * 1024)
+#define CFG_ENV_SIZE (CFG_ENV_SECT_SIZE)
+#define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_MONITOR_LEN)
+#define CFG_ENV_OFFSET (CFG_ENV_ADDR - CFG_FLASH_BASE)
+#define CFG_ENV_SIZE_REDUND (CFG_ENV_SECT_SIZE)
+
+/* Board Clock */
+/* The SCIF used external clock. system clock only used timer. */
+#define CONFIG_SYS_CLK_FREQ 50000000
+#define TMU_CLK_DIVIDER 4
+#define CFG_HZ (CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER)
+
+#endif /* __SH7785LCR_H */