ppc_4xx: Apply new HW register names
Modify all existing *.c files to use the new register names
as seen in the AMCC manuals.
Signed-off-by: Niklaus Giger <niklaus.giger@member.fsf.org>
Signed-off-by: Stefan Roese <sr@denx.de>
diff --git a/cpu/ppc4xx/miiphy.c b/cpu/ppc4xx/miiphy.c
index fa3bfc8..22ed5c2 100644
--- a/cpu/ppc4xx/miiphy.c
+++ b/cpu/ppc4xx/miiphy.c
@@ -195,7 +195,7 @@
unsigned long eoffset;
/* Need to find out which mdi port we're using */
- zmii = in_be32((void *)ZMII_FER);
+ zmii = in_be32((void *)ZMII0_FER);
if (zmii & (ZMII_FER_MDI << ZMII_FER_V (0)))
/* using port 0 */
@@ -217,12 +217,12 @@
/* None of the mdi ports are enabled! */
/* enable port 0 */
zmii |= ZMII_FER_MDI << ZMII_FER_V (0);
- out_be32((void *)ZMII_FER, zmii);
+ out_be32((void *)ZMII0_FER, zmii);
eoffset = 0;
/* need to soft reset port 0 */
- zmii = in_be32((void *)EMAC_M0);
- zmii |= EMAC_M0_SRST;
- out_be32((void *)EMAC_M0, zmii);
+ zmii = in_be32((void *)EMAC0_MR0);
+ zmii |= EMAC_MR0_SRST;
+ out_be32((void *)EMAC0_MR0, zmii);
}
return (eoffset);
@@ -243,19 +243,19 @@
switch (addr) {
#if defined(CONFIG_HAS_ETH1) && defined(CONFIG_GPCS_PHY1_ADDR)
case CONFIG_GPCS_PHY1_ADDR:
- if (addr == EMAC_M1_IPPA_GET(in_be32((void *)EMAC_M1 + 0x100)))
+ if (addr == EMAC_MR1_IPPA_GET(in_be32((void *)EMAC0_MR1 + 0x100)))
eoffset = 0x100;
break;
#endif
#if defined(CONFIG_HAS_ETH2) && defined(CONFIG_GPCS_PHY2_ADDR)
case CONFIG_GPCS_PHY2_ADDR:
- if (addr == EMAC_M1_IPPA_GET(in_be32((void *)EMAC_M1 + 0x300)))
+ if (addr == EMAC_MR1_IPPA_GET(in_be32((void *)EMAC0_MR1 + 0x300)))
eoffset = 0x300;
break;
#endif
#if defined(CONFIG_HAS_ETH3) && defined(CONFIG_GPCS_PHY3_ADDR)
case CONFIG_GPCS_PHY3_ADDR:
- if (addr == EMAC_M1_IPPA_GET(in_be32((void *)EMAC_M1 + 0x400)))
+ if (addr == EMAC_MR1_IPPA_GET(in_be32((void *)EMAC0_MR1 + 0x400)))
eoffset = 0x400;
break;
#endif
@@ -278,9 +278,9 @@
/* wait for completion */
i = 0;
do {
- sta_reg = in_be32((void *)EMAC_STACR + emac_reg);
+ sta_reg = in_be32((void *)EMAC0_STACR + emac_reg);
if (i++ > 5) {
- debug("%s [%d]: Timeout! EMAC_STACR=0x%0x\n", __func__,
+ debug("%s [%d]: Timeout! EMAC0_STACR=0x%0x\n", __func__,
__LINE__, sta_reg);
return -1;
}
@@ -324,7 +324,7 @@
if (cmd == EMAC_STACR_WRITE)
memcpy(&sta_reg, &value, 2); /* put in data */
- out_be32((void *)EMAC_STACR + emac_reg, sta_reg);
+ out_be32((void *)EMAC0_STACR + emac_reg, sta_reg);
debug("%s [%d]: sta_reg=%08x\n", __func__, __LINE__, sta_reg);
/* wait for completion */
@@ -349,7 +349,7 @@
if (emac_miiphy_command(addr, reg, EMAC_STACR_READ, 0) != 0)
return -1;
- sta_reg = in_be32((void *)EMAC_STACR + emac_reg);
+ sta_reg = in_be32((void *)EMAC0_STACR + emac_reg);
*value = sta_reg >> 16;
return 0;