diff --git a/board/dnp1110/memsetup.S b/board/dnp1110/memsetup.S
index bebd697..6539c20 100644
--- a/board/dnp1110/memsetup.S
+++ b/board/dnp1110/memsetup.S
@@ -25,8 +25,8 @@
 
 
 
-#include <config.h>
-#include <version.h>
+#include "config.h"
+#include "version.h"
 
 
 /* some parameters for the board */
@@ -34,63 +34,103 @@
 MEM_BASE:	.long	0xa0000000
 MEM_START:	.long	0xc0000000
 
-#define	MDCNFG	0x00
-#define MDCAS0	0x04
-#define MDCAS1	0x08
-#define MDCAS2	0x0c
-#define MSC0	0x10
-#define MSC1	0x14
-#define MECR	0x18
+#define MDCNFG		0x00
+#define MDCAS00		0x04		/* CAS waveform rotate reg 0       */
+#define MDCAS01		0x08		/* CAS waveform rotate reg 1 bank  */
+#define MDCAS02		0x0C		/* CAS waveform rotate reg 2 bank  */
+#define MDREFR		0x1C		/* DRAM refresh control reg        */
+#define MDCAS20		0x20		/* CAS waveform rotate reg 0 bank  */ 
+#define MDCAS21		0x24		/* CAS waveform rotate reg 1 bank  */
+#define MDCAS22		0x28		/* CAS waveform rotate reg 2 bank  */
+#define MECR		0x18		/* Expansion memory (PCMCIA) bus configuration  register */
+#define MSC0		0x10		/* static memory control reg 0     */
+#define MSC1		0x14		/* static memory control reg 1     */
+#define MSC2		0x2C		/* static memory control reg 2     */
+#define SMCNFG		0x30		/* SMROM configuration reg         */
 
-mdcas0:		.long	0xc71c703f
-mdcas1:		.long	0xffc71c71
-mdcas2:		.long	0xffffffff
-/* mdcnfg:		.long   0x0bb2bcbf */
-mdcnfg:		.long	0x0334b22f	@ alt
-/* mcs0:		.long   0xfff8fff8 */
-msc0:		.long	0xad8c4888	@ alt
-mecr:		.long	0x00060006
-/* mecr:		.long	0x994a994a	@ alt */
+mdcas00:	.long	0x5555557F
+mdcas01:	.long	0x55555555
+mdcas02:	.long	0x55555555
+mdcas20:	.long	0x5555557F
+mdcas21:	.long	0x55555555
+mdcas22:	.long	0x55555555
+mdcnfg:		.long	0x0000B25C
+mdrefr:		.long	0x007000C1
+mecr:		.long	0x10841084
+msc0:		.long	0x00004774
+msc1:		.long	0x00000000
+msc2:		.long	0x00000000
+smcnfg:		.long	0x00000000
 
 /* setting up the memory */
 
 .globl memsetup
 memsetup:
-	ldr	r0, MEM_BASE
 
-	/* Setup the flash memory */
-	ldr	r1, msc0
-	str	r1, [r0, #MSC0]
+	ldr	r0, MEM_BASE
 
 	/* Set up the DRAM */
 
-	/* MDCAS0 */
-	ldr	r1, mdcas0
-	str	r1, [r0, #MDCAS0]
+	/* MDCAS00 */
+	ldr	r1, mdcas00
+	str	r1, [r0, #MDCAS00]
 
-	/* MDCAS1 */
-	ldr	r1, mdcas1
-	str	r1, [r0, #MDCAS1]
+	/* MDCAS01 */
+	ldr	r1, mdcas01
+	str	r1, [r0, #MDCAS01]
 
-	/* MDCAS2 */
-	ldr	r1, mdcas2
-	str	r1, [r0, #MDCAS2]
+	/* MDCAS02 */
+	ldr	r1, mdcas02
+	str	r1, [r0, #MDCAS02]
 
-	/* MDCNFG */
-	ldr	r1, mdcnfg
-	str	r1, [r0, #MDCNFG]
+	/* MDCAS20 */
+	ldr	r1, mdcas20
+	str	r1, [r0, #MDCAS20]
+
+	/* MDCAS21 */
+	ldr	r1, mdcas21
+	str	r1, [r0, #MDCAS21]
+
+	/* MDCAS22 */
+	ldr	r1, mdcas22
+	str	r1, [r0, #MDCAS22]
+
+	/* MDREFR */
+	ldr	r1, mdrefr
+	str	r1, [r0, #MDREFR]
 
 	/* Set up PCMCIA space */
 	ldr	r1, mecr
 	str	r1, [r0, #MECR]
 
-	/* Load something to activate bank */
-	ldr	r1, MEM_START
+	/* Setup the flash memory and other */
+	ldr	r1, msc0
+	str	r1, [r0, #MSC0]
 
+	ldr	r1, msc1
+	str	r1, [r0, #MSC1]
+
+	ldr	r1, msc2
+	str	r1, [r0, #MSC2]
+
+	ldr	r1, smcnfg
+	str	r1, [r0, #SMCNFG]
+
+	/* MDCNFG */
+	ldr	r1, mdcnfg
+	bic	r1, r1, #0x00000001
+	str	r1, [r0, #MDCNFG]
+
+	/* Load something to activate bank */
+	ldr	r2, MEM_START
 .rept	8
-	ldr	r0, [r1]
+	ldr	r1, [r2]
 .endr
 
+	/* MDCNFG */
+	ldr	r1, mdcnfg
+	orr	r1, r1, #0x00000001
+	str	r1, [r0, #MDCNFG]
+
 	/* everything is fine now */
 	mov	pc, lr
-