diff --git a/board/emk/top860/Makefile b/board/emk/top860/Makefile
new file mode 100644
index 0000000..ef173d0
--- /dev/null
+++ b/board/emk/top860/Makefile
@@ -0,0 +1,40 @@
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+OBJS	= $(BOARD).o flash.o
+
+$(LIB):	.depend $(OBJS)
+	$(AR) crv $@ $^
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
diff --git a/board/emk/top860/flash.c b/board/emk/top860/flash.c
new file mode 100644
index 0000000..a9a9771
--- /dev/null
+++ b/board/emk/top860/flash.c
@@ -0,0 +1,490 @@
+/*
+ * (C) Copyright 2003
+ * EMK Elektronik GmbH <www.emk-elektronik.de>
+ * Reinhard Meyer <r.meyer@emk-elektronik.de>
+ *
+ * copied from the BMW Port - seems that its similiar enough
+ * to be easily adaped ;) --- Well, it turned out to become a
+ * merger between parts of the EMKstax Flash routines and the
+ * BMW funtion frames...
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc8xx.h>
+
+#define	FLASH_WORD_SIZE		unsigned short
+#define FLASH_WORD_WIDTH	(sizeof (FLASH_WORD_SIZE))
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips    */
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static int write_word (flash_info_t *info, ulong dest, ulong data);
+
+
+/*****************************************************************************
+ * software product ID entry/exit
+ *****************************************************************************/
+static void FlashProductIdMode (
+	volatile FLASH_WORD_SIZE *b,
+	int on_off)
+{
+	b[0x5555] = 0xaa;
+	b[0x2aaa] = 0x55;
+	b[0x5555] = on_off ? 0x90 : 0xf0;
+}
+
+/*****************************************************************************
+ * sector erase start
+ *****************************************************************************/
+static void FlashSectorErase (
+	volatile FLASH_WORD_SIZE *b,
+	volatile FLASH_WORD_SIZE *a)
+{
+	b[0x5555] = 0xaa;
+	b[0x2aaa] = 0x55;
+	b[0x5555] = 0x80;
+	b[0x5555] = 0xaa;
+	b[0x2aaa] = 0x55;
+	a[0] = 0x30;
+}
+
+/*****************************************************************************
+ * program a word
+ *****************************************************************************/
+static void FlashProgWord (
+	volatile FLASH_WORD_SIZE *b,
+	volatile FLASH_WORD_SIZE *a,
+	FLASH_WORD_SIZE v)
+{
+	b[0x5555] = 0xaa;
+	b[0x2aaa] = 0x55;
+	b[0x5555] = 0xa0;
+	a[0] = v;
+}
+
+/*****************************************************************************
+ * reset bank, back to read mode
+ *****************************************************************************/
+static void FlashReset (volatile FLASH_WORD_SIZE *b)
+{
+	b[0] = 0xf0;
+}
+
+/*****************************************************************************
+ * identify FLASH chip
+ * this code is a stripped version of the FlashGetType() function in EMKstax
+ *****************************************************************************/
+unsigned long flash_init (void)
+{
+	volatile FLASH_WORD_SIZE * const flash = (volatile FLASH_WORD_SIZE *) CFG_FLASH_BASE;
+	FLASH_WORD_SIZE	manu, dev;
+	flash_info_t * const pflinfo = &flash_info[0];
+	int j;
+
+	/* get Id Bytes */
+	FlashProductIdMode (flash, 1);
+	manu = flash[0];
+	dev  = flash[1];
+	FlashProductIdMode (flash, 0);
+
+	pflinfo->size = 0;
+	pflinfo->sector_count = 0;
+	pflinfo->flash_id = 0xffffffff;
+	pflinfo->portwidth = FLASH_CFI_16BIT;
+	pflinfo->chipwidth = FLASH_CFI_BY16;
+
+	switch (manu&0xff)
+	{
+	case 0x01:	/* AMD */
+		pflinfo->flash_id = FLASH_MAN_AMD;
+		switch (dev&0xff)
+		{
+		case 0x49:
+			pflinfo->size = 0x00200000;
+			pflinfo->sector_count = 35;
+			pflinfo->flash_id |= FLASH_AM160B;
+			pflinfo->start[0] = CFG_FLASH_BASE;
+			pflinfo->start[1] = CFG_FLASH_BASE + 0x4000;
+			pflinfo->start[2] = CFG_FLASH_BASE + 0x6000;
+			pflinfo->start[3] = CFG_FLASH_BASE + 0x8000;
+			for (j = 4; j < 35; j++)
+			{
+				pflinfo->start[j] = CFG_FLASH_BASE + 0x00010000 * (j-3);
+			}
+			break;
+
+		case 0xf9:
+			pflinfo->size = 0x00400000;
+			pflinfo->sector_count = 71;
+			pflinfo->flash_id |= FLASH_AM320B;
+			pflinfo->start[0] = CFG_FLASH_BASE;
+			pflinfo->start[1] = CFG_FLASH_BASE + 0x4000;
+			pflinfo->start[2] = CFG_FLASH_BASE + 0x6000;
+			pflinfo->start[3] = CFG_FLASH_BASE + 0x8000;
+			for (j = 0; j < 8; j++)
+			{
+				pflinfo->start[j] = CFG_FLASH_BASE + 0x00002000 * (j);
+			}
+			for (j = 8; j < 71; j++)
+			{
+				pflinfo->start[j] = CFG_FLASH_BASE + 0x00010000 * (j-7);
+			}
+			break;
+
+		default:
+			printf ("unknown AMD dev=%x ", dev);
+			pflinfo->flash_id |= FLASH_UNKNOWN;
+		}
+		break;
+
+	default:
+		printf ("unknown manu=%x ", manu);
+	}
+	return pflinfo->size;
+}
+
+/*****************************************************************************
+ * print info about a FLASH
+ *****************************************************************************/
+void flash_print_info (flash_info_t *info)
+{
+	static const char	unk[] = "Unknown";
+	unsigned int		i;
+	const char			*mfct=unk,
+						*type=unk;
+
+	if(info->flash_id != FLASH_UNKNOWN)
+	{
+		switch (info->flash_id & FLASH_VENDMASK)
+		{
+		case FLASH_MAN_AMD:
+			mfct = "AMD";
+			break;
+		}
+
+		switch (info->flash_id & FLASH_TYPEMASK)
+		{
+		case FLASH_AM160B:
+			type = "AM29LV160B (16 Mbit, bottom boot sect)";
+			break;
+		case FLASH_AM320B:
+			type = "AM29LV320B (32 Mbit, bottom boot sect)";
+			break;
+		}
+	}
+
+	printf (
+		"\n  Brand: %s Type: %s\n"
+		"  Size: %lu KB in %d Sectors\n",
+		mfct,
+		type,
+		info->size >> 10,
+		info->sector_count
+		);
+
+	printf ("  Sector Start Addresses:");
+
+	for (i = 0; i < info->sector_count; i++)
+	{
+		unsigned long	size;
+		unsigned int	erased;
+		unsigned long	*flash = (unsigned long *) info->start[i];
+
+		/*
+		 * Check if whole sector is erased
+		 */
+		size =
+			(i != (info->sector_count - 1)) ?
+			(info->start[i + 1] - info->start[i]) >> 2 :
+		(info->start[0] + info->size - info->start[i]) >> 2;
+
+		for (
+			flash = (unsigned long *) info->start[i], erased = 1;
+				(flash != (unsigned long *) info->start[i] + size) && erased;
+					flash++
+			)
+			erased = *flash == ~0x0UL;
+
+		printf (
+			"%s %08lX %s %s",
+			(i % 5) ? "" : "\n   ",
+			info->start[i],
+			erased ? "E" : " ",
+			info->protect[i] ? "RO" : "  "
+			);
+	}
+
+	puts ("\n");
+	return;
+}
+
+/*****************************************************************************
+ * erase one or more sectors
+ *****************************************************************************/
+int	flash_erase (flash_info_t *info, int s_first, int s_last)
+{
+	volatile FLASH_WORD_SIZE	*addr = (FLASH_WORD_SIZE *)(info->start[0]);
+	int							flag,
+								prot,
+								sect,
+								l_sect;
+	ulong						start,
+								now,
+								last;
+
+	if ((s_first < 0) || (s_first > s_last))
+	{
+		if (info->flash_id == FLASH_UNKNOWN)
+		{
+			printf ("- missing\n");
+		}
+		else
+		{
+			printf ("- no sectors to erase\n");
+		}
+		return 1;
+	}
+
+	if ((info->flash_id == FLASH_UNKNOWN) ||
+		(info->flash_id > (FLASH_MAN_STM | FLASH_AMD_COMP)))
+	{
+		printf ("Can't erase unknown flash type - aborted\n");
+		return 1;
+	}
+
+	prot = 0;
+	for (sect=s_first; sect<=s_last; ++sect)
+	{
+		if (info->protect[sect])
+		{
+			prot++;
+		}
+	}
+
+	if (prot)
+	{
+		printf ("- Warning: %d protected sectors will not be erased!\n",
+			prot);
+	}
+	else
+	{
+		printf ("\n");
+	}
+
+	l_sect = -1;
+
+	/* Disable interrupts which might cause a timeout here */
+	flag = disable_interrupts();
+
+	/* Start erase on unprotected sectors */
+	for (sect = s_first; sect<=s_last; sect++)
+	{
+		if (info->protect[sect] == 0)
+		{ /* not protected */
+			FlashSectorErase ((FLASH_WORD_SIZE *)info->start[0], (FLASH_WORD_SIZE *)info->start[sect]);
+			l_sect = sect;
+		}
+	}
+
+	/* re-enable interrupts if necessary */
+	if (flag)
+		enable_interrupts();
+
+	/* wait at least 80us - let's wait 1 ms */
+	udelay (1000);
+
+	/*
+	* We wait for the last triggered sector
+	*/
+	if (l_sect < 0)
+		goto DONE;
+
+	start = get_timer (0);
+	last  = start;
+	addr = (FLASH_WORD_SIZE *)info->start[l_sect];
+	while ((addr[0] & 0x0080) != 0x0080)
+	{
+		if ((now = get_timer (start)) > CFG_FLASH_ERASE_TOUT)
+		{
+			printf ("Timeout\n");
+			return 1;
+		}
+		/* show that we're waiting */
+		if ((now - last) > 1000)
+		{  /* every second */
+			serial_putc ('.');
+			last = now;
+		}
+	}
+
+	DONE:
+	/* reset to read mode */
+	FlashReset ((FLASH_WORD_SIZE *)info->start[0]);
+
+	printf (" done\n");
+	return 0;
+}
+
+/*****************************************************************************
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ *****************************************************************************/
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+	ulong		cp,
+				wp,
+				data;
+	int			i,
+				l,
+				rc;
+
+	wp = (addr & ~(FLASH_WORD_WIDTH-1));   /* get lower word aligned address */
+
+	/*
+	 * handle unaligned start bytes, if there are...
+	 */
+	if ((l = addr - wp) != 0)
+	{
+		data = 0;
+		
+		/* get the current before the new data into our data word */
+		for (i=0, cp=wp; i<l; ++i, ++cp)
+		{
+			data = (data << 8) | (*(uchar *)cp);
+		}
+		
+		/* now merge the to be programmed values */
+		for (; i<4 && cnt>0; ++i, ++cp, --cnt)
+		{
+			data = (data << 8) | *src++;
+		}
+
+		/* get the current after the new data into our data word */
+		for (; cnt==0 && i<FLASH_WORD_WIDTH; ++i, ++cp)
+		{
+			data = (data << 8) | (*(uchar *)cp);
+		}
+
+		/* now write the combined word */
+		if ((rc = write_word (info, wp, data)) != 0)
+		{
+			return (rc);
+		}
+		wp += FLASH_WORD_WIDTH;
+	}
+
+	/*
+	 * handle word aligned part
+	 */
+	while (cnt >= FLASH_WORD_WIDTH)
+	{
+		data = 0;
+		for (i=0; i<FLASH_WORD_WIDTH; ++i)
+		{
+			data = (data << 8) | *src++;
+		}
+		if ((rc = write_word (info, wp, data)) != 0)
+		{
+			return (rc);
+		}
+		wp  += FLASH_WORD_WIDTH;
+		cnt -= FLASH_WORD_WIDTH;
+	}
+
+	if (cnt == 0)
+	{
+		return (0);
+	}
+
+	/*
+	 * handle unaligned tail bytes, if there are...
+	 */
+	data = 0;
+
+	/* now merge the to be programmed values */
+	for (i=0, cp=wp; i<FLASH_WORD_WIDTH && cnt>0; ++i, ++cp)
+	{
+		data = (data << 8) | *src++;
+		--cnt;
+	}
+
+	/* get the current after the new data into our data word */
+	for (; i<FLASH_WORD_WIDTH; ++i, ++cp)
+	{
+		data = (data << 8) | (*(uchar *)cp);
+	}
+
+	/* now write the combined word */
+	return (write_word (info, wp, data));
+}
+
+/*****************************************************************************
+ * Write a word to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ *****************************************************************************/
+static int write_word (flash_info_t *info, ulong dest, ulong data)
+{
+	volatile FLASH_WORD_SIZE	*addr2 = (FLASH_WORD_SIZE *)info->start[0];
+	volatile FLASH_WORD_SIZE	*dest2 = (FLASH_WORD_SIZE *)dest;
+	FLASH_WORD_SIZE				data2 = data;
+	ulong						start;
+	int							flag;
+
+	/* Check if Flash is (sufficiently) erased */
+	if ((*dest2 & data2) != data2)
+	{
+		return (2);
+	}
+	
+	/* Disable interrupts which might cause a timeout here */
+	flag = disable_interrupts ();
+
+	FlashProgWord (addr2, dest2, data2);
+
+	/* re-enable interrupts if necessary */
+	if (flag)
+		enable_interrupts ();
+
+	/* data polling for D7 */
+	start = get_timer (0);
+	while ((*dest2 & 0x0080) != (data2 & 0x0080))
+	{
+		if (get_timer (start) > CFG_FLASH_WRITE_TOUT)
+		{
+			return (1);
+		}
+	}
+
+	return (0);
+}
+
+/*-----------------------------------------------------------------------
+ */
+
diff --git a/board/emk/top860/top860.c b/board/emk/top860/top860.c
new file mode 100644
index 0000000..b99bf0e
--- /dev/null
+++ b/board/emk/top860/top860.c
@@ -0,0 +1,187 @@
+/*
+ * (C) Copyright 2003
+ * EMK Elektronik GmbH <www.emk-elektronik.de>
+ * Reinhard Meyer <r.meyer@emk-elektronik.de>
+ *
+ * Board specific routines for the TOP860
+ *
+ * - initialisation
+ * - interface to VPD data (mac address, clock speeds)
+ * - memory controller
+ * - serial io initialisation
+ * - ethernet io initialisation
+ *
+ * -----------------------------------------------------------------
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <commproc.h>
+#include <mpc8xx.h>
+
+/*****************************************************************************
+ * UPM table for 60ns EDO RAM at 25 MHz bus/external clock
+ *****************************************************************************/
+static const uint edo_60ns_25MHz_tbl[] = {
+
+/* single read   (offset 0x00 in upm ram) */
+    0x0ff3fc04,0x08f3fc04,0x00f3fc04,0x00f3fc00,
+    0x33f7fc07,0xfffffc05,0xfffffc05,0xfffffc05,
+/* burst read    (offset 0x08 in upm ram) */
+    0x0ff3fc04,0x08f3fc04,0x00f3fc0c,0x0ff3fc40,
+    0x0cf3fc04,0x03f3fc48,0x0cf3fc04,0x03f3fc48,
+    0x0cf3fc04,0x03f3fc00,0x3ff7fc07,0xfffffc05,
+    0xfffffc05,0xfffffc05,0xfffffc05,0xfffffc05,
+/* single write  (offset 0x18 in upm ram) */
+    0x0ffffc04,0x08fffc04,0x30fffc00,0xf1fffc07,
+    0xfffffc05,0xfffffc05,0xfffffc05,0xfffffc05,
+/* burst write   (offset 0x20 in upm ram) */
+    0x0ffffc04,0x08fffc00,0x00fffc04,0x03fffc4c,
+    0x00fffc00,0x07fffc4c,0x00fffc00,0x0ffffc4c,
+    0x00fffc00,0x3ffffc07,0xfffffc05,0xfffffc05,
+    0xfffffc05,0xfffffc05,0xfffffc05,0xfffffc05,
+/* refresh       (offset 0x30 in upm ram) */
+    0xc0fffc04,0x07fffc04,0x0ffffc04,0x0ffffc04,
+    0xfffffc05,0xfffffc05,0xfffffc05,0xfffffc05,
+    0xfffffc05,0xfffffc05,0xfffffc05,0xfffffc05,
+/* exception     (offset 0x3C in upm ram) */
+    0xfffffc07,0xfffffc03,0xfffffc05,0xfffffc05,
+};
+
+/*****************************************************************************
+ * Print Board Identity
+ *****************************************************************************/
+int checkboard (void)
+{
+	puts ("Board:"CONFIG_IDENT_STRING"\n");
+	return (0);
+}
+
+/*****************************************************************************
+ * Initialize DRAM controller
+ *****************************************************************************/
+long int initdram (int board_type)
+{
+	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile memctl8xx_t *memctl = &immap->im_memctl;
+
+	/*
+	 * Only initialize memory controller when running from FLASH.
+	 * When running from RAM, don't touch it.
+	 */
+	if ((ulong) initdram & 0xff000000)
+	{
+		volatile uint	*addr1, *addr2;
+		uint			i, j;
+
+		upmconfig (UPMA, (uint *) edo_60ns_25MHz_tbl,
+			sizeof (edo_60ns_25MHz_tbl) / sizeof (uint));
+		memctl->memc_mptpr = 0x0200;
+		memctl->memc_mamr = 0x0ca20330;
+		memctl->memc_or2 = -CFG_DRAM_MAX | OR_CSNT_SAM;
+		memctl->memc_br2 = CFG_DRAM_BASE | BR_MS_UPMA | BR_V;
+		/*
+		 * Do 8 read accesses to DRAM
+		 */
+		addr1 = (volatile uint*) 0;
+		addr2 = (volatile uint*) 0x00400000;
+		for (i=0, j=0; i<8; i++)
+			j = addr1[0];
+		
+		/*
+		 * Now check whether we got 4MB or 16MB populated
+		 */
+		addr1[0] = 0x12345678;
+		addr1[1] = 0x9abcdef0;
+		addr2[0] = 0xfeedc0de;
+		addr2[1] = 0x47110815;
+		if (addr1[0] == 0xfeedc0de && addr1[1] == 0x47110815)
+		{
+			/* only 4MB populated */
+			memctl->memc_or2 = -(CFG_DRAM_MAX/4) | OR_CSNT_SAM;
+		}
+	}
+
+	return -(memctl->memc_or2 & 0xffff0000);
+}
+
+/*****************************************************************************
+ * otherinits after RAM is there and we are relocated to RAM
+ * note: though this is an int function, nobody cares for the result!
+ *****************************************************************************/
+int misc_init_r (void)
+{
+	/* read 'factory' part of EEPROM */
+	uchar				buf[81];
+	uchar				*p;
+	uint				length;
+	uint				addr;
+	uint				len;
+
+	/* get length first */
+	addr = CFG_FACT_OFFSET;
+	if (eeprom_read (CFG_I2C_FACT_ADDR, addr, buf, 2))
+	{
+bailout:
+		printf ("cannot read factory configuration\n");
+		printf ("be sure to set ethaddr	yourself!\n");
+		return 0;
+	}
+	length = buf[0] + (buf[1]<<8);
+	addr += 2;
+
+	/* sanity check */
+	if (length < 20 || length > CFG_FACT_SIZE-2)
+		goto bailout;
+
+	/* read lines */
+	while (length > 0)
+	{
+		/* read one line */
+		len = length > 80 ? 80 : length;
+		if (eeprom_read (CFG_I2C_FACT_ADDR, addr, buf, len))
+			goto bailout;
+		/* mark end of buffer */
+		buf[len] = 0;
+		/* search end of line */
+		for (p=buf; *p && *p != 0x0a; p++) ;
+		if (!*p)
+			goto bailout;
+		*p++ = 0;
+		/* advance to next line start */
+		length -= p-buf;
+		addr += p-buf;
+		/*printf ("%s\n", buf);*/
+		/* search for our specific entry */
+		if (!strncmp ((char *)buf, "[RLA/lan/Ethernet] ", 19))
+		{
+			setenv ("ethaddr", buf+19);
+		} 
+		else if (!strncmp ((char *)buf, "[BOARD/SERIAL] ", 15))
+		{
+			setenv ("serial#", buf+15);
+		} 
+		else if (!strncmp ((char *)buf, "[BOARD/TYPE] ", 13))
+		{
+			setenv ("board_id", buf+13);
+		} 
+	}
+	return (0);
+}
+
diff --git a/board/emk/top860/u-boot.lds b/board/emk/top860/u-boot.lds
new file mode 100644
index 0000000..d647be3
--- /dev/null
+++ b/board/emk/top860/u-boot.lds
@@ -0,0 +1,122 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    cpu/mpc8xx/start.o	(.text)
+
+    *(.text)
+    *(.fixup)
+    *(.got1)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(.rodata)
+    *(.rodata1)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}
+
diff --git a/board/emk/top860/u-boot.lds.debug b/board/emk/top860/u-boot.lds.debug
new file mode 100644
index 0000000..bd13b7b
--- /dev/null
+++ b/board/emk/top860/u-boot.lds.debug
@@ -0,0 +1,132 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    /* WARNING - the following is hand-optimized to fit within	*/
+    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
+
+    cpu/mpc8xx/start.o	(.text)
+    common/dlmalloc.o	(.text)
+    lib_generic/vsprintf.o	(.text)
+    lib_generic/crc32.o		(.text)
+    lib_ppc/extable.o	(.text)
+
+    . = env_offset;
+    common/environment.o(.text)
+
+    *(.text)
+    *(.fixup)
+    *(.got1)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(.rodata)
+    *(.rodata1)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x0FFF) & 0xFFFFF000;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(4096);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(4096);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}
+