nand: mxc: Switch NAND SPL to generic SPL
This also fixes support for mx31pdk and tx25, which had been broken by commit
e05e5de7fae5bec79617e113916dac6631251156.
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Acked-by: Scott Wood <scottwood@freescale.com>
Tested-by: Fabio Estevam <fabio.estevam@freescale.com>
diff --git a/drivers/mtd/nand/mxc_nand.h b/drivers/mtd/nand/mxc_nand.h
new file mode 100644
index 0000000..308ff8d
--- /dev/null
+++ b/drivers/mtd/nand/mxc_nand.h
@@ -0,0 +1,225 @@
+/*
+ * (c) 2009 Magnus Lilja <lilja.magnus@gmail.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __MXC_NAND_H
+#define __MXC_NAND_H
+
+/*
+ * Register map and bit definitions for the Freescale NAND Flash Controller
+ * present in various i.MX devices.
+ *
+ * MX31 and MX27 have version 1, which has:
+ * 4 512-byte main buffers and
+ * 4 16-byte spare buffers
+ * to support up to 2K byte pagesize nand.
+ * Reading or writing a 2K page requires 4 FDI/FDO cycles.
+ *
+ * MX25 and MX35 have version 2.1, and MX51 and MX53 have version 3.2, which
+ * have:
+ * 8 512-byte main buffers and
+ * 8 64-byte spare buffers
+ * to support up to 4K byte pagesize nand.
+ * Reading or writing a 2K or 4K page requires only 1 FDI/FDO cycle.
+ * Also some of registers are moved and/or changed meaning as seen below.
+ */
+#if defined(CONFIG_MX27) || defined(CONFIG_MX31)
+#define MXC_NFC_V1
+#define is_mxc_nfc_1() 1
+#define is_mxc_nfc_21() 0
+#define is_mxc_nfc_32() 0
+#elif defined(CONFIG_MX25) || defined(CONFIG_MX35)
+#define MXC_NFC_V2_1
+#define is_mxc_nfc_1() 0
+#define is_mxc_nfc_21() 1
+#define is_mxc_nfc_32() 0
+#elif defined(CONFIG_MX51) || defined(CONFIG_MX53)
+#define MXC_NFC_V3
+#define MXC_NFC_V3_2
+#define is_mxc_nfc_1() 0
+#define is_mxc_nfc_21() 0
+#define is_mxc_nfc_32() 1
+#else
+#error "MXC NFC implementation not supported"
+#endif
+#define is_mxc_nfc_3() is_mxc_nfc_32()
+
+#if defined(MXC_NFC_V1)
+#define NAND_MXC_NR_BUFS 4
+#define NAND_MXC_SPARE_BUF_SIZE 16
+#define NAND_MXC_REG_OFFSET 0xe00
+#define NAND_MXC_2K_MULTI_CYCLE
+#elif defined(MXC_NFC_V2_1) || defined(MXC_NFC_V3_2)
+#define NAND_MXC_NR_BUFS 8
+#define NAND_MXC_SPARE_BUF_SIZE 64
+#define NAND_MXC_REG_OFFSET 0x1e00
+#endif
+
+struct mxc_nand_regs {
+ u8 main_area[NAND_MXC_NR_BUFS][0x200];
+ u8 spare_area[NAND_MXC_NR_BUFS][NAND_MXC_SPARE_BUF_SIZE];
+ /*
+ * reserved size is offset of nfc registers
+ * minus total main and spare sizes
+ */
+ u8 reserved1[NAND_MXC_REG_OFFSET
+ - NAND_MXC_NR_BUFS * (512 + NAND_MXC_SPARE_BUF_SIZE)];
+#if defined(MXC_NFC_V1)
+ u16 buf_size;
+ u16 reserved2;
+ u16 buf_addr;
+ u16 flash_addr;
+ u16 flash_cmd;
+ u16 config;
+ u16 ecc_status_result;
+ u16 rsltmain_area;
+ u16 rsltspare_area;
+ u16 wrprot;
+ u16 unlockstart_blkaddr;
+ u16 unlockend_blkaddr;
+ u16 nf_wrprst;
+ u16 config1;
+ u16 config2;
+#elif defined(MXC_NFC_V2_1)
+ u16 reserved2[2];
+ u16 buf_addr;
+ u16 flash_addr;
+ u16 flash_cmd;
+ u16 config;
+ u32 ecc_status_result;
+ u16 spare_area_size;
+ u16 wrprot;
+ u16 reserved3[2];
+ u16 nf_wrprst;
+ u16 config1;
+ u16 config2;
+ u16 reserved4;
+ u16 unlockstart_blkaddr;
+ u16 unlockend_blkaddr;
+ u16 unlockstart_blkaddr1;
+ u16 unlockend_blkaddr1;
+ u16 unlockstart_blkaddr2;
+ u16 unlockend_blkaddr2;
+ u16 unlockstart_blkaddr3;
+ u16 unlockend_blkaddr3;
+#elif defined(MXC_NFC_V3_2)
+ u32 flash_cmd;
+ u32 flash_addr[12];
+ u32 config1;
+ u32 ecc_status_result;
+ u32 status_sum;
+ u32 launch;
+#endif
+};
+
+#ifdef MXC_NFC_V3_2
+struct mxc_nand_ip_regs {
+ u32 wrprot;
+ u32 wrprot_unlock_blkaddr[8];
+ u32 config2;
+ u32 config3;
+ u32 ipc;
+ u32 err_addr;
+ u32 delay_line;
+};
+#endif
+
+/* Set FCMD to 1, rest to 0 for Command operation */
+#define NFC_CMD 0x1
+
+/* Set FADD to 1, rest to 0 for Address operation */
+#define NFC_ADDR 0x2
+
+/* Set FDI to 1, rest to 0 for Input operation */
+#define NFC_INPUT 0x4
+
+/* Set FDO to 001, rest to 0 for Data Output operation */
+#define NFC_OUTPUT 0x8
+
+/* Set FDO to 010, rest to 0 for Read ID operation */
+#define NFC_ID 0x10
+
+/* Set FDO to 100, rest to 0 for Read Status operation */
+#define NFC_STATUS 0x20
+
+#if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1)
+#define NFC_CONFIG1_SP_EN (1 << 2)
+#define NFC_CONFIG1_RST (1 << 6)
+#define NFC_CONFIG1_CE (1 << 7)
+#elif defined(MXC_NFC_V3_2)
+#define NFC_CONFIG1_SP_EN (1 << 0)
+#define NFC_CONFIG1_CE (1 << 1)
+#define NFC_CONFIG1_RST (1 << 2)
+#endif
+#define NFC_V1_V2_CONFIG1_ECC_EN (1 << 3)
+#define NFC_V1_V2_CONFIG1_INT_MSK (1 << 4)
+#define NFC_V1_V2_CONFIG1_BIG (1 << 5)
+#define NFC_V2_CONFIG1_ECC_MODE_4 (1 << 0)
+#define NFC_V2_CONFIG1_ONE_CYCLE (1 << 8)
+#define NFC_V2_CONFIG1_FP_INT (1 << 11)
+#define NFC_V3_CONFIG1_RBA_MASK (0x7 << 4)
+#define NFC_V3_CONFIG1_RBA(x) (((x) & 0x7) << 4)
+
+#define NFC_V1_V2_CONFIG2_INT (1 << 15)
+#define NFC_V3_CONFIG2_PS_MASK (0x3 << 0)
+#define NFC_V3_CONFIG2_PS_512 (0 << 0)
+#define NFC_V3_CONFIG2_PS_2048 (1 << 0)
+#define NFC_V3_CONFIG2_PS_4096 (2 << 0)
+#define NFC_V3_CONFIG2_ONE_CYCLE (1 << 2)
+#define NFC_V3_CONFIG2_ECC_EN (1 << 3)
+#define NFC_V3_CONFIG2_2CMD_PHASES (1 << 4)
+#define NFC_V3_CONFIG2_NUM_ADDR_PH0 (1 << 5)
+#define NFC_V3_CONFIG2_ECC_MODE_8 (1 << 6)
+#define NFC_V3_CONFIG2_PPB_MASK (0x3 << 7)
+#define NFC_V3_CONFIG2_PPB(x) (((x) & 0x3) << 7)
+#define NFC_V3_CONFIG2_EDC_MASK (0x7 << 9)
+#define NFC_V3_CONFIG2_EDC(x) (((x) & 0x7) << 9)
+#define NFC_V3_CONFIG2_NUM_ADDR_PH1(x) (((x) & 0x3) << 12)
+#define NFC_V3_CONFIG2_INT_MSK (1 << 15)
+#define NFC_V3_CONFIG2_SPAS_MASK (0xff << 16)
+#define NFC_V3_CONFIG2_SPAS(x) (((x) & 0xff) << 16)
+#define NFC_V3_CONFIG2_ST_CMD_MASK (0xff << 24)
+#define NFC_V3_CONFIG2_ST_CMD(x) (((x) & 0xff) << 24)
+
+#define NFC_V3_CONFIG3_ADD_OP(x) (((x) & 0x3) << 0)
+#define NFC_V3_CONFIG3_FW8 (1 << 3)
+#define NFC_V3_CONFIG3_SBB(x) (((x) & 0x7) << 8)
+#define NFC_V3_CONFIG3_NUM_OF_DEVS(x) (((x) & 0x7) << 12)
+#define NFC_V3_CONFIG3_RBB_MODE (1 << 15)
+#define NFC_V3_CONFIG3_NO_SDMA (1 << 20)
+
+#define NFC_V3_WRPROT_UNLOCK (1 << 2)
+#define NFC_V3_WRPROT_BLS_UNLOCK (2 << 6)
+
+#define NFC_V3_IPC_CREQ (1 << 0)
+#define NFC_V3_IPC_INT (1 << 31)
+
+#if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1)
+#define operation config2
+#define readnfc readw
+#define writenfc writew
+#elif defined(MXC_NFC_V3_2)
+#define operation launch
+#define readnfc readl
+#define writenfc writel
+#endif
+
+#endif /* __MXC_NAND_H */