board: samsung: delete unused source files
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Mateusz Zalega <m.zalega@samsung.com>
Cc: Minkyu Kang <mk7.kang@samsung.com>
Acked-by: Mateusz Zalega <m.zalega@samsung.com>
diff --git a/board/samsung/goni/mem_setup.S b/board/samsung/goni/mem_setup.S
deleted file mode 100644
index 5dc980c..0000000
--- a/board/samsung/goni/mem_setup.S
+++ /dev/null
@@ -1,249 +0,0 @@
-/*
- * Copyright (C) 2009 Samsung Electrnoics
- * Minkyu Kang <mk7.kang@samsung.com>
- * Kyungmin Park <kyungmin.park@samsung.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <config.h>
-
- .globl mem_ctrl_asm_init
-mem_ctrl_asm_init:
- cmp r7, r8
-
- ldreq r0, =S5PC100_DMC_BASE @ 0xE6000000
- ldrne r0, =S5PC110_DMC0_BASE @ 0xF0000000
- ldrne r6, =S5PC110_DMC1_BASE @ 0xF1400000
-
- /* DLL parameter setting */
- ldr r1, =0x50101000
- str r1, [r0, #0x018] @ PHYCONTROL0_OFFSET
- strne r1, [r6, #0x018] @ PHYCONTROL0_OFFSET
- ldr r1, =0x000000f4
- str r1, [r0, #0x01C] @ PHYCONTROL1_OFFSET
- strne r1, [r6, #0x01C] @ PHYCONTROL1_OFFSET
- ldreq r1, =0x0
- streq r1, [r0, #0x020] @ PHYCONTROL2_OFFSET
-
- /* DLL on */
- ldr r1, =0x50101002
- str r1, [r0, #0x018] @ PHYCONTROL0_OFFSET
- strne r1, [r6, #0x018] @ PHYCONTROL0_OFFSET
-
- /* DLL start */
- ldr r1, =0x50101003
- str r1, [r0, #0x018] @ PHYCONTROL0_OFFSET
- strne r1, [r6, #0x018] @ PHYCONTROL0_OFFSET
-
- mov r2, #0x4000
-wait: subs r2, r2, #0x1
- cmp r2, #0x0
- bne wait
-
- cmp r7, r8
- /* Force value locking for DLL off */
- str r1, [r0, #0x018] @ PHYCONTROL0_OFFSET
- strne r1, [r6, #0x018] @ PHYCONTROL0_OFFSET
-
- /* DLL off */
- ldr r1, =0x50101009
- str r1, [r0, #0x018] @ PHYCONTROL0_OFFSET
- strne r1, [r6, #0x018] @ PHYCONTROL0_OFFSET
-
- /* auto refresh off */
- ldr r1, =0xff001010 | (1 << 7)
- ldr r2, =0xff001010 | (1 << 7)
- str r1, [r0, #0x000] @ CONCONTROL_OFFSET
- strne r2, [r6, #0x000] @ CONCONTROL_OFFSET
-
- /*
- * Burst Length 4, 2 chips, 32-bit, LPDDR
- * OFF: dynamic self refresh, force precharge, dynamic power down off
- */
- ldr r1, =0x00212100
- ldr r2, =0x00212100
- str r1, [r0, #0x004] @ MEMCONTROL_OFFSET
- strne r2, [r6, #0x004] @ MEMCONTROL_OFFSET
-
- /*
- * Note:
- * If Bank0 has Mobile RAM we place it at 0x3800'0000 (s5pc100 only)
- * So finally Bank1 OneDRAM should address start at at 0x3000'0000
- */
-
- /*
- * DMC0: CS0 : S5PC100/S5PC110
- * 0x30 -> 0x30000000
- * 0xf8 -> 0x37FFFFFF
- * [15:12] 0: Linear
- * [11:8 ] 2: 9 bits
- * [ 7:4 ] 2: 14 bits
- * [ 3:0 ] 2: 4 banks
- */
- ldr r3, =0x30f80222
- ldr r4, =0x40f00222
-swap_memory:
- str r3, [r0, #0x008] @ MEMCONFIG0_OFFSET
- str r4, [r0, #0x00C] @ dummy write
-
- /*
- * DMC1: CS0 : S5PC110
- * 0x40 -> 0x40000000
- * 0xf8 -> 0x47FFFFFF (1Gib)
- * 0x40 -> 0x40000000
- * 0xf0 -> 0x4FFFFFFF (2Gib)
- * [15:12] 0: Linear
- * [11:8 ] 2: 9 bits - Col (1Gib)
- * [11:8 ] 3: 10 bits - Col (2Gib)
- * [ 7:4 ] 2: 14 bits - Row
- * [ 3:0 ] 2: 4 banks
- */
- /* Default : 2GiB */
- ldr r4, =0x40f01322 @ 2Gib: MCP B
- ldr r5, =0x50f81312 @ dummy: MCP D
- cmp r9, #1
- ldreq r4, =0x40f81222 @ 1Gib: MCP A
- cmp r9, #3
- ldreq r5, =0x50f81312 @ 2Gib + 1Gib: MCP D
- cmp r9, #4
- ldreq r5, =0x50f01312 @ 2Gib + 2Gib: MCP E
-
- cmp r7, r8
- strne r4, [r6, #0x008] @ MEMCONFIG0_OFFSET
- strne r5, [r6, #0x00C] @ MEMCONFIG1_OFFSET
-
- /*
- * DMC0: CS1: S5PC100
- * 0x38 -> 0x38000000
- * 0xf8 -> 0x3fFFFFFF
- * [15:12] 0: Linear
- * [11:8 ] 2: 9 bits
- * [ 7:4 ] 2: 14 bits
- * [ 3:0 ] 2: 4 banks
- */
- eoreq r3, r3, #0x08000000
- streq r3, [r0, #0xc] @ MEMCONFIG1_OFFSET
-
- ldr r1, =0x20000000
- str r1, [r0, #0x014] @ PRECHCONFIG_OFFSET
- strne r1, [r0, #0x014] @ PRECHCONFIG_OFFSET
- strne r1, [r6, #0x014] @ PRECHCONFIG_OFFSET
-
- /*
- * S5PC100:
- * DMC: CS0: 166MHz
- * CS1: 166MHz
- * S5PC110:
- * DMC0: CS0: 166MHz
- * DMC1: CS0: 200MHz
- *
- * 7.8us * 200MHz %LE %LONG1560(0x618)
- * 7.8us * 166MHz %LE %LONG1294(0x50E)
- * 7.8us * 133MHz %LE %LONG1038(0x40E),
- * 7.8us * 100MHz %LE %LONG780(0x30C),
- */
- ldr r1, =0x0000050E
- str r1, [r0, #0x030] @ TIMINGAREF_OFFSET
- ldrne r1, =0x00000618
- strne r1, [r6, #0x030] @ TIMINGAREF_OFFSET
-
- ldr r1, =0x14233287
- str r1, [r0, #0x034] @ TIMINGROW_OFFSET
- ldrne r1, =0x182332c8
- strne r1, [r6, #0x034] @ TIMINGROW_OFFSET
-
- ldr r1, =0x12130005
- str r1, [r0, #0x038] @ TIMINGDATA_OFFSET
- ldrne r1, =0x13130005
- strne r1, [r6, #0x038] @ TIMINGDATA_OFFSET
-
- ldr r1, =0x0E140222
- str r1, [r0, #0x03C] @ TIMINGPOWER_OFFSET
- ldrne r1, =0x0E180222
- strne r1, [r6, #0x03C] @ TIMINGPOWER_OFFSET
-
- /* chip0 Deselect */
- ldr r1, =0x07000000
- str r1, [r0, #0x010] @ DIRECTCMD_OFFSET
- strne r1, [r6, #0x010] @ DIRECTCMD_OFFSET
-
- /* chip0 PALL */
- ldr r1, =0x01000000
- str r1, [r0, #0x010] @ DIRECTCMD_OFFSET
- strne r1, [r6, #0x010] @ DIRECTCMD_OFFSET
-
- /* chip0 REFA */
- ldr r1, =0x05000000
- str r1, [r0, #0x010] @ DIRECTCMD_OFFSET
- strne r1, [r6, #0x010] @ DIRECTCMD_OFFSET
- /* chip0 REFA */
- str r1, [r0, #0x010] @ DIRECTCMD_OFFSET
- strne r1, [r6, #0x010] @ DIRECTCMD_OFFSET
-
- /* chip0 MRS */
- ldr r1, =0x00000032
- str r1, [r0, #0x010] @ DIRECTCMD_OFFSET
- strne r1, [r6, #0x010] @ DIRECTCMD_OFFSET
-
- /* chip0 EMRS */
- ldr r1, =0x00020020
- str r1, [r0, #0x010] @ DIRECTCMD_OFFSET
- strne r1, [r6, #0x010] @ DIRECTCMD_OFFSET
-
- /* chip1 Deselect */
- ldr r1, =0x07100000
- str r1, [r0, #0x010] @ DIRECTCMD_OFFSET
- strne r1, [r6, #0x010] @ DIRECTCMD_OFFSET
-
- /* chip1 PALL */
- ldr r1, =0x01100000
- str r1, [r0, #0x010] @ DIRECTCMD_OFFSET
- strne r1, [r6, #0x010] @ DIRECTCMD_OFFSET
-
- /* chip1 REFA */
- ldr r1, =0x05100000
- str r1, [r0, #0x010] @ DIRECTCMD_OFFSET
- strne r1, [r6, #0x010] @ DIRECTCMD_OFFSET
- /* chip1 REFA */
- str r1, [r0, #0x010] @ DIRECTCMD_OFFSET
- strne r1, [r6, #0x010] @ DIRECTCMD_OFFSET
-
- /* chip1 MRS */
- ldr r1, =0x00100032
- str r1, [r0, #0x010] @ DIRECTCMD_OFFSET
- strne r1, [r6, #0x010] @ DIRECTCMD_OFFSET
-
- /* chip1 EMRS */
- ldr r1, =0x00120020
- str r1, [r0, #0x010] @ DIRECTCMD_OFFSET
- strne r1, [r6, #0x010] @ DIRECTCMD_OFFSET
-
- /* auto refresh on */
- ldr r1, =0xFF002030 | (1 << 7)
- str r1, [r0, #0x000] @ CONCONTROL_OFFSET
- strne r1, [r6, #0x000] @ CONCONTROL_OFFSET
-
- /* PwrdnConfig */
- ldr r1, =0x00100002
- str r1, [r0, #0x028] @ PWRDNCONFIG_OFFSET
- strne r1, [r6, #0x028] @ PWRDNCONFIG_OFFSET
-
- ldr r1, =0x00212113
- str r1, [r0, #0x004] @ MEMCONTROL_OFFSET
- strne r1, [r6, #0x004] @ MEMCONTROL_OFFSET
-
- /* Skip when S5PC110 */
- bne 1f
-
- /* Check OneDRAM access area at s5pc100 */
- ldreq r3, =0x38f80222
- ldreq r1, =0x37ffff00
- str r3, [r1]
- ldr r2, [r1]
- cmp r2, r3
- beq swap_memory
-1:
- mov pc, lr
-
- .ltorg
diff --git a/board/samsung/smdkc100/mem_setup.S b/board/samsung/smdkc100/mem_setup.S
deleted file mode 100644
index 2f2df0b..0000000
--- a/board/samsung/smdkc100/mem_setup.S
+++ /dev/null
@@ -1,181 +0,0 @@
-/*
- * Originates from Samsung's u-boot 1.1.6 port to S5PC1xx
- *
- * Copyright (C) 2009 Samsung Electrnoics
- * Inki Dae <inki.dae@samsung.com>
- * Heungjun Kim <riverful.kim@samsung.com>
- * Minkyu Kang <mk7.kang@samsung.com>
- * Kyungmin Park <kyungmin.park@samsung.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <config.h>
-
- .globl mem_ctrl_asm_init
-mem_ctrl_asm_init:
- ldr r6, =S5PC100_DMC_BASE @ 0xE6000000
-
- /* DLL parameter setting */
- ldr r1, =0x50101000
- str r1, [r6, #0x018] @ PHYCONTROL0
- ldr r1, =0xf4
- str r1, [r6, #0x01C] @ PHYCONTROL1
- ldr r1, =0x0
- str r1, [r6, #0x020] @ PHYCONTROL2
-
- /* DLL on */
- ldr r1, =0x50101002
- str r1, [r6, #0x018] @ PHYCONTROL0
-
- /* DLL start */
- ldr r1, =0x50101003
- str r1, [r6, #0x018] @ PHYCONTROL0
-
- /* Force value locking for DLL off */
- str r1, [r6, #0x018] @ PHYCONTROL0
-
- /* DLL off */
- ldr r1, =0x50101001
- str r1, [r6, #0x018] @ PHYCONTROL0
-
- /* auto refresh off */
- ldr r1, =0xff001010
- str r1, [r6, #0x000] @ CONCONTROL
-
- /*
- * Burst Length 4, 2 chips, 32-bit, LPDDR
- * OFF: dynamic self refresh, force precharge, dynamic power down off
- */
- ldr r1, =0x00212100
- str r1, [r6, #0x004] @ MEMCONTROL
-
- /*
- * Note:
- * If Bank0 has OneDRAM we place it at 0x2800'0000
- * So finally Bank1 should address start at at 0x2000'0000
- */
- mov r4, #0x0
-
-swap_memory:
- /*
- * Bank0
- * 0x30 -> 0x30000000
- * 0xf8 -> 0x37FFFFFF
- * [15:12] 0: Linear
- * [11:8 ] 2: 9 bits
- * [ 7:4 ] 2: 14 bits
- * [ 3:0 ] 2: 4 banks
- */
- ldr r1, =0x30f80222
- /* if r4 is 1, swap the bank */
- cmp r4, #0x1
- orreq r1, r1, #0x08000000
- str r1, [r6, #0x008] @ MEMCONFIG0
-
- /*
- * Bank1
- * 0x38 -> 0x38000000
- * 0xf8 -> 0x3fFFFFFF
- * [15:12] 0: Linear
- * [11:8 ] 2: 9 bits
- * [ 7:4 ] 2: 14 bits
- * [ 3:0 ] 2: 4 banks
- */
- ldr r1, =0x38f80222
- /* if r4 is 1, swap the bank */
- cmp r4, #0x1
- biceq r1, r1, #0x08000000
- str r1, [r6, #0x00c] @ MEMCONFIG1
-
- ldr r1, =0x20000000
- str r1, [r6, #0x014] @ PRECHCONFIG
-
- /*
- * FIXME: Please verify these values
- * 7.8us * 166MHz %LE %LONG1294(0x50E)
- * 7.8us * 133MHz %LE %LONG1038(0x40E),
- * 7.8us * 100MHz %LE %LONG780(0x30C),
- * 7.8us * 20MHz %LE %LONG156(0x9C),
- * 7.8us * 10MHz %LE %LONG78(0x4E)
- */
- ldr r1, =0x0000050e
- str r1, [r6, #0x030] @ TIMINGAREF
-
- /* 166 MHz */
- ldr r1, =0x0c233287
- str r1, [r6, #0x034] @ TIMINGROW
-
- /* twtr=3 twr=2 trtp=3 cl=3 wl=3 rl=3 */
- ldr r1, =0x32330303
- str r1, [r6, #0x038] @ TIMINGDATA
-
- /* tfaw=4 sxsr=0x14 txp=0x14 tcke=3 tmrd=3 */
- ldr r1, =0x04141433
- str r1, [r6, #0x03C] @ TIMINGPOWER
-
- /* chip0 Deselect */
- ldr r1, =0x07000000
- str r1, [r6, #0x010] @ DIRECTCMD
-
- /* chip0 PALL */
- ldr r1, =0x01000000
- str r1, [r6, #0x010] @ DIRECTCMD
-
- /* chip0 REFA */
- ldr r1, =0x05000000
- str r1, [r6, #0x010] @ DIRECTCMD
- /* chip0 REFA */
- str r1, [r6, #0x010] @ DIRECTCMD
-
- /* chip0 MRS, CL%LE %LONG3, BL%LE %LONG4 */
- ldr r1, =0x00000032
- str r1, [r6, #0x010] @ DIRECTCMD
-
- /* chip1 Deselect */
- ldr r1, =0x07100000
- str r1, [r6, #0x010] @ DIRECTCMD
-
- /* chip1 PALL */
- ldr r1, =0x01100000
- str r1, [r6, #0x010] @ DIRECTCMD
-
- /* chip1 REFA */
- ldr r1, =0x05100000
- str r1, [r6, #0x010] @ DIRECTCMD
- /* chip1 REFA */
- str r1, [r6, #0x010] @ DIRECTCMD
-
- /* chip1 MRS, CL%LE %LONG3, BL%LE %LONG4 */
- ldr r1, =0x00100032
- str r1, [r6, #0x010] @ DIRECTCMD
-
- /* auto refresh on */
- ldr r1, =0xff002030
- str r1, [r6, #0x000] @ CONCONTROL
-
- /* PwrdnConfig */
- ldr r1, =0x00100002
- str r1, [r6, #0x028] @ PWRDNCONFIG
-
- /* BL%LE %LONG */
- ldr r1, =0xff212100
- str r1, [r6, #0x004] @ MEMCONTROL
-
-
- /* Try to test memory area */
- cmp r4, #0x1
- beq 1f
-
- mov r4, #0x1
- ldr r1, =0x37ffff00
- str r4, [r1]
- str r4, [r1, #0x4] @ dummy write
- ldr r0, [r1]
- cmp r0, r4
- bne swap_memory
-
-1:
- mov pc, lr
-
- .ltorg