imx:mx6sx add dram io configure for mx6sx
Define two structure mx6sx_iomux_ddr_regs and mx6sx_iomux_grp_regs.
Add a new function mx6sx_dram_iocfg to configure dram io.
Since mx6sx only have one channel mmdc0, define a new empty macro MMDC1
to replace mmdc1->entry=value for mx6sx. And to other mx6 soc, MMDC1
effects as "mmdc1->entry=value".
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
diff --git a/arch/arm/cpu/armv7/mx6/ddr.c b/arch/arm/cpu/armv7/mx6/ddr.c
index 7a9b03a..fef2231 100644
--- a/arch/arm/cpu/armv7/mx6/ddr.c
+++ b/arch/arm/cpu/armv7/mx6/ddr.c
@@ -12,6 +12,65 @@
#include <asm/io.h>
#include <asm/types.h>
+#if defined(CONFIG_MX6SX)
+/* Configure MX6SX mmdc iomux */
+void mx6sx_dram_iocfg(unsigned width,
+ const struct mx6sx_iomux_ddr_regs *ddr,
+ const struct mx6sx_iomux_grp_regs *grp)
+{
+ struct mx6sx_iomux_ddr_regs *mx6_ddr_iomux;
+ struct mx6sx_iomux_grp_regs *mx6_grp_iomux;
+
+ mx6_ddr_iomux = (struct mx6sx_iomux_ddr_regs *)MX6SX_IOM_DDR_BASE;
+ mx6_grp_iomux = (struct mx6sx_iomux_grp_regs *)MX6SX_IOM_GRP_BASE;
+
+ /* DDR IO TYPE */
+ writel(grp->grp_ddr_type, &mx6_grp_iomux->grp_ddr_type);
+ writel(grp->grp_ddrpke, &mx6_grp_iomux->grp_ddrpke);
+
+ /* CLOCK */
+ writel(ddr->dram_sdclk_0, &mx6_ddr_iomux->dram_sdclk_0);
+
+ /* ADDRESS */
+ writel(ddr->dram_cas, &mx6_ddr_iomux->dram_cas);
+ writel(ddr->dram_ras, &mx6_ddr_iomux->dram_ras);
+ writel(grp->grp_addds, &mx6_grp_iomux->grp_addds);
+
+ /* Control */
+ writel(ddr->dram_reset, &mx6_ddr_iomux->dram_reset);
+ writel(ddr->dram_sdba2, &mx6_ddr_iomux->dram_sdba2);
+ writel(ddr->dram_sdcke0, &mx6_ddr_iomux->dram_sdcke0);
+ writel(ddr->dram_sdcke1, &mx6_ddr_iomux->dram_sdcke1);
+ writel(ddr->dram_odt0, &mx6_ddr_iomux->dram_odt0);
+ writel(ddr->dram_odt1, &mx6_ddr_iomux->dram_odt1);
+ writel(grp->grp_ctlds, &mx6_grp_iomux->grp_ctlds);
+
+ /* Data Strobes */
+ writel(grp->grp_ddrmode_ctl, &mx6_grp_iomux->grp_ddrmode_ctl);
+ writel(ddr->dram_sdqs0, &mx6_ddr_iomux->dram_sdqs0);
+ writel(ddr->dram_sdqs1, &mx6_ddr_iomux->dram_sdqs1);
+ if (width >= 32) {
+ writel(ddr->dram_sdqs2, &mx6_ddr_iomux->dram_sdqs2);
+ writel(ddr->dram_sdqs3, &mx6_ddr_iomux->dram_sdqs3);
+ }
+
+ /* Data */
+ writel(grp->grp_ddrmode, &mx6_grp_iomux->grp_ddrmode);
+ writel(grp->grp_b0ds, &mx6_grp_iomux->grp_b0ds);
+ writel(grp->grp_b1ds, &mx6_grp_iomux->grp_b1ds);
+ if (width >= 32) {
+ writel(grp->grp_b2ds, &mx6_grp_iomux->grp_b2ds);
+ writel(grp->grp_b3ds, &mx6_grp_iomux->grp_b3ds);
+ }
+ writel(ddr->dram_dqm0, &mx6_ddr_iomux->dram_dqm0);
+ writel(ddr->dram_dqm1, &mx6_ddr_iomux->dram_dqm1);
+ if (width >= 32) {
+ writel(ddr->dram_dqm2, &mx6_ddr_iomux->dram_dqm2);
+ writel(ddr->dram_dqm3, &mx6_ddr_iomux->dram_dqm3);
+ }
+}
+#endif
+
#if defined(CONFIG_MX6QDL) || defined(CONFIG_MX6Q) || defined(CONFIG_MX6D)
/* Configure MX6DQ mmdc iomux */
void mx6dq_dram_iocfg(unsigned width,
@@ -184,12 +243,19 @@
*/
#define MR(val, ba, cmd, cs1) \
((val << 16) | (1 << 15) | (cmd << 4) | (cs1 << 3) | ba)
+#ifdef CONFIG_MX6SX
+#define MMDC1(entry, value) do {} while (0)
+#else
+#define MMDC1(entry, value) do { mmdc1->entry = value; } while (0)
+#endif
void mx6_dram_cfg(const struct mx6_ddr_sysinfo *sysinfo,
const struct mx6_mmdc_calibration *calib,
const struct mx6_ddr3_cfg *ddr3_cfg)
{
volatile struct mmdc_p_regs *mmdc0;
+#ifndef CONFIG_MX6SX
volatile struct mmdc_p_regs *mmdc1;
+#endif
u32 val;
u8 tcke, tcksrx, tcksre, txpdll, taofpd, taonpd, trrd;
u8 todtlon, taxpd, tanpd, tcwl, txp, tfaw, tcl;
@@ -203,7 +269,9 @@
int cs;
mmdc0 = (struct mmdc_p_regs *)MMDC_P0_BASE_ADDR;
+#ifndef CONFIG_MX6SX
mmdc1 = (struct mmdc_p_regs *)MMDC_P1_BASE_ADDR;
+#endif
/* MX6D/MX6Q: 1066 MHz memory clock, clkper = 1.894ns = 1894ps */
if (is_cpu_type(MXC_CPU_MX6Q) || is_cpu_type(MXC_CPU_MX6D)) {
@@ -362,12 +430,12 @@
mmdc0->mprddlctl = calib->p0_mprddlctl;
mmdc0->mpwrdlctl = calib->p0_mpwrdlctl;
if (sysinfo->dsize > 1) {
- mmdc1->mpwldectrl0 = calib->p1_mpwldectrl0;
- mmdc1->mpwldectrl1 = calib->p1_mpwldectrl1;
- mmdc1->mpdgctrl0 = calib->p1_mpdgctrl0;
- mmdc1->mpdgctrl1 = calib->p1_mpdgctrl1;
- mmdc1->mprddlctl = calib->p1_mprddlctl;
- mmdc1->mpwrdlctl = calib->p1_mpwrdlctl;
+ MMDC1(mpwldectrl0, calib->p1_mpwldectrl0);
+ MMDC1(mpwldectrl1, calib->p1_mpwldectrl1);
+ MMDC1(mpdgctrl0, calib->p1_mpdgctrl0);
+ MMDC1(mpdgctrl1, calib->p1_mpdgctrl1);
+ MMDC1(mprddlctl, calib->p1_mprddlctl);
+ MMDC1(mpwrdlctl, calib->p1_mpwrdlctl);
}
/* Read data DQ Byte0-3 delay */
@@ -379,23 +447,23 @@
}
if (sysinfo->dsize > 1) {
- mmdc1->mprddqby0dl = 0x33333333;
- mmdc1->mprddqby1dl = 0x33333333;
- mmdc1->mprddqby2dl = 0x33333333;
- mmdc1->mprddqby3dl = 0x33333333;
+ MMDC1(mprddqby0dl, 0x33333333);
+ MMDC1(mprddqby1dl, 0x33333333);
+ MMDC1(mprddqby2dl, 0x33333333);
+ MMDC1(mprddqby3dl, 0x33333333);
}
/* MMDC Termination: rtt_nom:2 RZQ/2(120ohm), rtt_nom:1 RZQ/4(60ohm) */
val = (sysinfo->rtt_nom == 2) ? 0x00011117 : 0x00022227;
mmdc0->mpodtctrl = val;
if (sysinfo->dsize > 1)
- mmdc1->mpodtctrl = val;
+ MMDC1(mpodtctrl, val);
/* complete calibration */
val = (1 << 11); /* Force measurement on delay-lines */
mmdc0->mpmur0 = val;
if (sysinfo->dsize > 1)
- mmdc1->mpmur0 = val;
+ MMDC1(mpmur0, val);
/* Step 1: configuration request */
mmdc0->mdscr = (u32)(1 << 15); /* config request */
@@ -435,7 +503,7 @@
val = 0xa1390001; /* one-time HW ZQ calib */
mmdc0->mpzqhwctrl = val;
if (sysinfo->dsize > 1)
- mmdc1->mpzqhwctrl = val;
+ MMDC1(mpzqhwctrl, val);
/* Step 7: Enable MMDC with desired chip select */
mmdc0->mdctl |= (1 << 31) | /* SDE_0 for CS0 */
@@ -477,7 +545,7 @@
val = 0xa1390003;
mmdc0->mpzqhwctrl = val;
if (sysinfo->dsize > 1)
- mmdc1->mpzqhwctrl = val;
+ MMDC1(mpzqhwctrl, val);
/* Step 12: Configure and activate periodic refresh */
mmdc0->mdref = (1 << 14) | /* REF_SEL: Periodic refresh cycle: 32kHz */