GCC-4.x fixes: clean up global data pointer initialization for all boards.
diff --git a/board/esd/cpci750/mpsc.c b/board/esd/cpci750/mpsc.c
index 52398b2..25c10e0 100644
--- a/board/esd/cpci750/mpsc.c
+++ b/board/esd/cpci750/mpsc.c
@@ -42,6 +42,8 @@
#include "../../Marvell/include/memory.h"
+DECLARE_GLOBAL_DATA_PTR;
+
/* Define this if you wish to use the MPSC as a register based UART.
* This will force the serial port to not use the SDMA engine at all.
*/
@@ -157,7 +159,6 @@
* global variables [josh] */
int mpsc_putchar_early (char ch)
{
- DECLARE_GLOBAL_DATA_PTR;
int mpsc = CHANNEL;
int temp =
GTREGREAD (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP));
@@ -510,7 +511,6 @@
int galbrg_set_baudrate (int channel, int rate)
{
- DECLARE_GLOBAL_DATA_PTR;
int clock;
galbrg_disable (channel); /*ok */
diff --git a/board/esd/cpci750/mv_eth.c b/board/esd/cpci750/mv_eth.c
index be176dc..bc84ef0 100644
--- a/board/esd/cpci750/mv_eth.c
+++ b/board/esd/cpci750/mv_eth.c
@@ -733,6 +733,7 @@
pkt_info.cmd_sts = ETH_TX_FIRST_DESC | ETH_TX_LAST_DESC; /* DMA owned, first last */
pkt_info.byte_cnt = dataSize;
pkt_info.buf_ptr = (unsigned int) dataPtr;
+ pkt_info.return_info = 0;
status = eth_port_send (ethernet_private, ETH_Q0, &pkt_info);
if ((status == ETH_ERROR) || (status == ETH_QUEUE_FULL)) {
diff --git a/board/esd/cpci750/sdram_init.c b/board/esd/cpci750/sdram_init.c
index db545ef..6bdfc1d 100644
--- a/board/esd/cpci750/sdram_init.c
+++ b/board/esd/cpci750/sdram_init.c
@@ -45,6 +45,7 @@
#include "64360.h"
#include "mv_regs.h"
+DECLARE_GLOBAL_DATA_PTR;
#undef DEBUG
/* #define DEBUG */
@@ -250,8 +251,6 @@
/* static int check_dimm(uchar slot, AUX_MEM_DIMM_INFO *info) */
static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo)
{
- DECLARE_GLOBAL_DATA_PTR;
-
unsigned long spd_checksum;
uchar addr = slot == 0 ? DIMM0_I2C_ADDR : DIMM1_I2C_ADDR;
diff --git a/board/esd/cpci750/serial.c b/board/esd/cpci750/serial.c
index 44de052..ba32ac1 100644
--- a/board/esd/cpci750/serial.c
+++ b/board/esd/cpci750/serial.c
@@ -38,13 +38,12 @@
#include "../../Marvell/include/memory.h"
#include "serial.h"
-
#include "mpsc.h"
+DECLARE_GLOBAL_DATA_PTR;
+
int serial_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
mpsc_init (gd->baudrate);
return (0);
@@ -70,8 +69,6 @@
void serial_setbrg (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
galbrg_set_baudrate (CONFIG_MPSC_PORT, gd->baudrate);
}