phy: Add USB PHY driver for the MT76x8 (7628/7688) SoC

This driver is derived from this Linux driver:
linux/drivers/phy/ralink/phy-ralink-usb.c

The driver sets up power and host mode, but also needs to configure PHY
registers for the MT7628 and MT7688.

I removed the reset controller handling for the USB host and device, as
it does not seem to be necessary right now. The soft reset bits for both
devices are enabled by default and testing has shown (with hackish
reset handling added), that USB related commands work identical with
or without the reset handling.

Please note that the resulting USB support is tested only very minimal.
I was able to detect one of my 3 currently available USB sticks.
Perhaps some further work is needed to fully support the EHCI controller
integrated in the MT76x8 SoC.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 32bbf41..102fb91 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -174,4 +174,12 @@
 
 	  This PHY is found on some Keystone (K2) devices supporting USB.
 
+config MT76X8_USB_PHY
+	bool "MediaTek MT76x8 (7628/88) USB PHY support"
+	depends on PHY
+	help
+          Support the USB PHY in MT76x8 SoCs
+
+	  This PHY is found on MT76x8 devices supporting USB.
+
 endmenu
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index 099551d..b55917b 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -19,3 +19,4 @@
 obj-$(CONFIG_MSM8916_USB_PHY) += msm8916-usbh-phy.o
 obj-$(CONFIG_OMAP_USB2_PHY) += omap-usb2-phy.o
 obj-$(CONFIG_KEYSTONE_USB_PHY) += keystone-usb-phy.o
+obj-$(CONFIG_MT76X8_USB_PHY) += mt76x8-usb-phy.o
diff --git a/drivers/phy/mt76x8-usb-phy.c b/drivers/phy/mt76x8-usb-phy.c
new file mode 100644
index 0000000..268da8e
--- /dev/null
+++ b/drivers/phy/mt76x8-usb-phy.c
@@ -0,0 +1,161 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Stefan Roese <sr@denx.de>
+ *
+ * Derived from linux/drivers/phy/ralink/phy-ralink-usb.c
+ *     Copyright (C) 2017 John Crispin <john@phrozen.org>
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <generic-phy.h>
+#include <regmap.h>
+#include <reset-uclass.h>
+#include <syscon.h>
+#include <asm/io.h>
+
+#define RT_SYSC_REG_SYSCFG1		0x014
+#define RT_SYSC_REG_CLKCFG1		0x030
+#define RT_SYSC_REG_USB_PHY_CFG		0x05c
+
+#define OFS_U2_PHY_AC0			0x800
+#define OFS_U2_PHY_AC1			0x804
+#define OFS_U2_PHY_AC2			0x808
+#define OFS_U2_PHY_ACR0			0x810
+#define OFS_U2_PHY_ACR1			0x814
+#define OFS_U2_PHY_ACR2			0x818
+#define OFS_U2_PHY_ACR3			0x81C
+#define OFS_U2_PHY_ACR4			0x820
+#define OFS_U2_PHY_AMON0		0x824
+#define OFS_U2_PHY_DCR0			0x860
+#define OFS_U2_PHY_DCR1			0x864
+#define OFS_U2_PHY_DTM0			0x868
+#define OFS_U2_PHY_DTM1			0x86C
+
+#define RT_RSTCTRL_UDEV			BIT(25)
+#define RT_RSTCTRL_UHST			BIT(22)
+#define RT_SYSCFG1_USB0_HOST_MODE	BIT(10)
+
+#define MT7620_CLKCFG1_UPHY0_CLK_EN	BIT(25)
+#define MT7620_CLKCFG1_UPHY1_CLK_EN	BIT(22)
+#define RT_CLKCFG1_UPHY1_CLK_EN		BIT(20)
+#define RT_CLKCFG1_UPHY0_CLK_EN		BIT(18)
+
+#define USB_PHY_UTMI_8B60M		BIT(1)
+#define UDEV_WAKEUP			BIT(0)
+
+struct mt76x8_usb_phy {
+	u32			clk;
+	void __iomem		*base;
+	struct regmap		*sysctl;
+};
+
+static void u2_phy_w32(struct mt76x8_usb_phy *phy, u32 val, u32 reg)
+{
+	writel(val, phy->base + reg);
+}
+
+static u32 u2_phy_r32(struct mt76x8_usb_phy *phy, u32 reg)
+{
+	return readl(phy->base + reg);
+}
+
+static void mt76x8_usb_phy_init(struct mt76x8_usb_phy *phy)
+{
+	u2_phy_r32(phy, OFS_U2_PHY_AC2);
+	u2_phy_r32(phy, OFS_U2_PHY_ACR0);
+	u2_phy_r32(phy, OFS_U2_PHY_DCR0);
+
+	u2_phy_w32(phy, 0x00ffff02, OFS_U2_PHY_DCR0);
+	u2_phy_r32(phy, OFS_U2_PHY_DCR0);
+	u2_phy_w32(phy, 0x00555502, OFS_U2_PHY_DCR0);
+	u2_phy_r32(phy, OFS_U2_PHY_DCR0);
+	u2_phy_w32(phy, 0x00aaaa02, OFS_U2_PHY_DCR0);
+	u2_phy_r32(phy, OFS_U2_PHY_DCR0);
+	u2_phy_w32(phy, 0x00000402, OFS_U2_PHY_DCR0);
+	u2_phy_r32(phy, OFS_U2_PHY_DCR0);
+	u2_phy_w32(phy, 0x0048086a, OFS_U2_PHY_AC0);
+	u2_phy_w32(phy, 0x4400001c, OFS_U2_PHY_AC1);
+	u2_phy_w32(phy, 0xc0200000, OFS_U2_PHY_ACR3);
+	u2_phy_w32(phy, 0x02000000, OFS_U2_PHY_DTM0);
+}
+
+static int mt76x8_usb_phy_power_on(struct phy *_phy)
+{
+	struct mt76x8_usb_phy *phy = dev_get_priv(_phy->dev);
+	u32 t;
+
+	/* enable the phy */
+	regmap_update_bits(phy->sysctl, RT_SYSC_REG_CLKCFG1,
+			   phy->clk, phy->clk);
+
+	/* setup host mode */
+	regmap_update_bits(phy->sysctl, RT_SYSC_REG_SYSCFG1,
+			   RT_SYSCFG1_USB0_HOST_MODE,
+			   RT_SYSCFG1_USB0_HOST_MODE);
+
+	/*
+	 * The SDK kernel had a delay of 100ms. however on device
+	 * testing showed that 10ms is enough
+	 */
+	mdelay(10);
+
+	if (phy->base)
+		mt76x8_usb_phy_init(phy);
+
+	/* print some status info */
+	regmap_read(phy->sysctl, RT_SYSC_REG_USB_PHY_CFG, &t);
+	printf("remote usb device wakeup %s\n",
+	       (t & UDEV_WAKEUP) ? "enabled" : "disabled");
+	if (t & USB_PHY_UTMI_8B60M)
+		printf("UTMI 8bit 60MHz\n");
+	else
+		printf("UTMI 16bit 30MHz\n");
+
+	return 0;
+}
+
+static int mt76x8_usb_phy_power_off(struct phy *_phy)
+{
+	struct mt76x8_usb_phy *phy = dev_get_priv(_phy->dev);
+
+	/* disable the phy */
+	regmap_update_bits(phy->sysctl, RT_SYSC_REG_CLKCFG1,
+			   phy->clk, 0);
+
+	return 0;
+}
+
+static int mt76x8_usb_phy_probe(struct udevice *dev)
+{
+	struct mt76x8_usb_phy *phy = dev_get_priv(dev);
+
+	phy->sysctl = syscon_regmap_lookup_by_phandle(dev, "ralink,sysctl");
+	if (IS_ERR(phy->sysctl))
+		return PTR_ERR(phy->sysctl);
+
+	phy->base = dev_read_addr_ptr(dev);
+	if (!phy->base)
+		return -EINVAL;
+
+	return 0;
+}
+
+static struct phy_ops mt76x8_usb_phy_ops = {
+	.power_on = mt76x8_usb_phy_power_on,
+	.power_off = mt76x8_usb_phy_power_off,
+};
+
+static const struct udevice_id mt76x8_usb_phy_ids[] = {
+	{ .compatible = "mediatek,mt7628-usbphy" },
+	{ }
+};
+
+U_BOOT_DRIVER(mt76x8_usb_phy) = {
+	.name		= "mt76x8_usb_phy",
+	.id		= UCLASS_PHY,
+	.of_match	= mt76x8_usb_phy_ids,
+	.ops		= &mt76x8_usb_phy_ops,
+	.probe		= mt76x8_usb_phy_probe,
+	.priv_auto_alloc_size = sizeof(struct mt76x8_usb_phy),
+};