Merge branch 'master' of git://git.denx.de/u-boot-blackfin
* 'master' of git://git.denx.de/u-boot-blackfin:
Blackfin: bfin_spi: fix build error when DEBUG is defined
Blackfin: define CONFIG_SYS_CACHELINE_SIZE
diff --git a/arch/arm/cpu/arm1136/mx31/generic.c b/arch/arm/cpu/arm1136/mx31/generic.c
index c6def5d..5524b23 100644
--- a/arch/arm/cpu/arm1136/mx31/generic.c
+++ b/arch/arm/cpu/arm1136/mx31/generic.c
@@ -28,10 +28,10 @@
static u32 mx31_decode_pll(u32 reg, u32 infreq)
{
- u32 mfi = (reg >> 10) & 0xf;
- u32 mfn = reg & 0x3ff;
- u32 mfd = (reg >> 16) & 0x3ff;
- u32 pd = (reg >> 26) & 0xf;
+ u32 mfi = GET_PLL_MFI(reg);
+ u32 mfn = GET_PLL_MFN(reg);
+ u32 mfd = GET_PLL_MFD(reg);
+ u32 pd = GET_PLL_PD(reg);
mfi = mfi <= 5 ? 5 : mfi;
mfd += 1;
@@ -45,12 +45,12 @@
{
u32 infreq;
- if ((__REG(CCM_CCMR) & CCMR_PRCS_MASK) == CCMR_FPM)
+ if ((readl(CCM_CCMR) & CCMR_PRCS_MASK) == CCMR_FPM)
infreq = CONFIG_MX31_CLK32 * 1024;
else
infreq = CONFIG_MX31_HCLK_FREQ;
- return mx31_decode_pll(__REG(CCM_MPCTL), infreq);
+ return mx31_decode_pll(readl(CCM_MPCTL), infreq);
}
static u32 mx31_get_mcu_main_clk(void)
@@ -64,10 +64,21 @@
static u32 mx31_get_ipg_clk(void)
{
u32 freq = mx31_get_mcu_main_clk();
- u32 pdr0 = __REG(CCM_PDR0);
+ u32 pdr0 = readl(CCM_PDR0);
- freq /= ((pdr0 >> 3) & 0x7) + 1;
- freq /= ((pdr0 >> 6) & 0x3) + 1;
+ freq /= GET_PDR0_MAX_PODF(pdr0) + 1;
+ freq /= GET_PDR0_IPG_PODF(pdr0) + 1;
+
+ return freq;
+}
+
+/* hsp is the clock for the ipu */
+static u32 mx31_get_hsp_clk(void)
+{
+ u32 freq = mx31_get_mcu_main_clk();
+ u32 pdr0 = readl(CCM_PDR0);
+
+ freq /= GET_PDR0_HSP_PODF(pdr0) + 1;
return freq;
}
@@ -77,6 +88,7 @@
u32 cpufreq = mx31_get_mcu_main_clk();
printf("mx31 cpu clock: %dMHz\n",cpufreq / 1000000);
printf("ipg clock : %dHz\n", mx31_get_ipg_clk());
+ printf("hsp clock : %dHz\n", mx31_get_hsp_clk());
}
unsigned int mxc_get_clock(enum mxc_clock clk)
@@ -89,6 +101,8 @@
case MXC_CSPI_CLK:
case MXC_UART_CLK:
return mx31_get_ipg_clk();
+ case MXC_IPU_CLK:
+ return mx31_get_hsp_clk();
}
return -1;
}
@@ -105,10 +119,10 @@
reg = IOMUXC_BASE + (mode & 0x1fc);
shift = (~mode & 0x3) * 8;
- tmp = __REG(reg);
+ tmp = readl(reg);
tmp &= ~(0xff << shift);
tmp |= ((mode >> IOMUX_MODE_POS) & 0xff) << shift;
- __REG(reg) = tmp;
+ writel(tmp, reg);
}
void mx31_set_pad(enum iomux_pins pin, u32 config)
@@ -119,10 +133,10 @@
reg = (IOMUXC_BASE + 0x154) + (pin + 2) / 3 * 4;
field = (pin + 2) % 3;
- l = __REG(reg);
+ l = readl(reg);
l &= ~(0x1ff << (field * 10));
l |= config << (field * 10);
- __REG(reg) = l;
+ writel(l, reg);
}
diff --git a/arch/arm/include/asm/arch-mx31/clock.h b/arch/arm/include/asm/arch-mx31/clock.h
index cc99a75..2e3bce2 100644
--- a/arch/arm/include/asm/arch-mx31/clock.h
+++ b/arch/arm/include/asm/arch-mx31/clock.h
@@ -30,6 +30,7 @@
MXC_IPG_PERCLK,
MXC_CSPI_CLK,
MXC_UART_CLK,
+ MXC_IPU_CLK
};
unsigned int mxc_get_clock(enum mxc_clock clk);
diff --git a/arch/arm/include/asm/arch-mx31/imx-regs.h b/arch/arm/include/asm/arch-mx31/imx-regs.h
index 0dcd9fe..f263e6bc 100644
--- a/arch/arm/include/asm/arch-mx31/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx31/imx-regs.h
@@ -513,6 +513,20 @@
#define PLL_MFI(x) (((x) & 0xf) << 10)
#define PLL_MFN(x) (((x) & 0x3ff) << 0)
+#define GET_PDR0_CSI_PODF(x) (((x) >> 23) & 0x1ff)
+#define GET_PDR0_PER_PODF(x) (((x) >> 16) & 0x1f)
+#define GET_PDR0_HSP_PODF(x) (((x) >> 11) & 0x7)
+#define GET_PDR0_NFC_PODF(x) (((x) >> 8) & 0x7)
+#define GET_PDR0_IPG_PODF(x) (((x) >> 6) & 0x3)
+#define GET_PDR0_MAX_PODF(x) (((x) >> 3) & 0x7)
+#define GET_PDR0_MCU_PODF(x) ((x) & 0x7)
+
+#define GET_PLL_PD(x) (((x) >> 26) & 0xf)
+#define GET_PLL_MFD(x) (((x) >> 16) & 0x3ff)
+#define GET_PLL_MFI(x) (((x) >> 10) & 0xf)
+#define GET_PLL_MFN(x) (((x) >> 0) & 0x3ff)
+
+
#define WEIM_ESDCTL0 0xB8001000
#define WEIM_ESDCFG0 0xB8001004
#define WEIM_ESDCTL1 0xB8001008
diff --git a/board/ttcontrol/vision2/vision2.c b/board/ttcontrol/vision2/vision2.c
index ebca7b6..e496f64 100644
--- a/board/ttcontrol/vision2/vision2.c
+++ b/board/ttcontrol/vision2/vision2.c
@@ -39,12 +39,12 @@
#include <mc13892.h>
#include <linux/fb.h>
+#include <ipu_pixfmt.h>
+
DECLARE_GLOBAL_DATA_PTR;
static u32 system_rev;
-extern int mx51_fb_init(struct fb_videomode *mode);
-
static struct fb_videomode nec_nl6448bc26_09c = {
"NEC_NL6448BC26-09C",
60, /* Refresh */
@@ -600,6 +600,21 @@
}
#endif
+void lcd_enable(void)
+{
+ int ret;
+
+ mxc_request_iomux(MX51_PIN_DI1_PIN2, IOMUX_CONFIG_ALT0);
+ mxc_request_iomux(MX51_PIN_DI1_PIN3, IOMUX_CONFIG_ALT0);
+
+ gpio_set_value(2, 1);
+ mxc_request_iomux(MX51_PIN_GPIO1_2, IOMUX_CONFIG_ALT0);
+
+ ret = mx51_fb_init(&nec_nl6448bc26_09c, 0, IPU_PIX_FMT_RGB666);
+ if (ret)
+ puts("LCD cannot be configured\n");
+}
+
int board_early_init_f(void)
{
@@ -636,26 +651,15 @@
}
}
-void lcd_enable(void)
-{
- int ret;
-
- mxc_request_iomux(MX51_PIN_DI1_PIN2, IOMUX_CONFIG_ALT0);
- mxc_request_iomux(MX51_PIN_DI1_PIN3, IOMUX_CONFIG_ALT0);
-
- gpio_set_value(2, 1);
- mxc_request_iomux(MX51_PIN_GPIO1_2, IOMUX_CONFIG_ALT0);
-
- ret = mx51_fb_init(&nec_nl6448bc26_09c);
- if (ret)
- puts("LCD cannot be configured\n");
-}
-
int board_init(void)
{
/* address of boot parameters */
gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
+ lcd_enable();
+
+ backlight(1);
+
return 0;
}
@@ -676,6 +680,8 @@
udelay(2000);
#endif
+ setenv("stdout", "serial");
+
return 0;
}
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index 3790f91..ecc1896 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -35,7 +35,7 @@
COBJS-$(CONFIG_VIDEO_CT69000) += ct69000.o videomodes.o
COBJS-$(CONFIG_VIDEO_MB862xx) += mb862xx.o videomodes.o
COBJS-$(CONFIG_VIDEO_MB86R0xGDC) += mb86r0xgdc.o videomodes.o
-COBJS-$(CONFIG_VIDEO_MX3) += mx3fb.o
+COBJS-$(CONFIG_VIDEO_MX3) += mx3fb.o videomodes.o
COBJS-$(CONFIG_VIDEO_MX5) += mxc_ipuv3_fb.o ipu_common.o ipu_disp.o
COBJS-$(CONFIG_VIDEO_OMAP3) += omap3_dss.o videomodes.o
COBJS-$(CONFIG_VIDEO_SED13806) += sed13806.o
diff --git a/drivers/video/cfb_console.c b/drivers/video/cfb_console.c
index 3a93b64..4e653b8 100644
--- a/drivers/video/cfb_console.c
+++ b/drivers/video/cfb_console.c
@@ -161,6 +161,13 @@
#endif
/*
+ * Defines for the i.MX31 driver (mx3fb.c)
+ */
+#ifdef CONFIG_VIDEO_MX3
+#define VIDEO_FB_16BPP_WORD_SWAP
+#endif
+
+/*
* Include video_fb.h after definitions of VIDEO_HW_RECTFILL etc.
*/
#include <video_fb.h>
diff --git a/drivers/video/fsl_diu_fb.c b/drivers/video/fsl_diu_fb.c
index e1d6c26..cb43904 100644
--- a/drivers/video/fsl_diu_fb.c
+++ b/drivers/video/fsl_diu_fb.c
@@ -31,52 +31,8 @@
#include "videomodes.h"
#include <video_fb.h>
#include <fsl_diu_fb.h>
-
-struct fb_var_screeninfo {
- unsigned int xres; /* visible resolution */
- unsigned int yres;
-
- unsigned int bits_per_pixel; /* guess what */
-
- /* Timing: All values in pixclocks, except pixclock (of course) */
- unsigned int pixclock; /* pixel clock in ps (pico seconds) */
- unsigned int left_margin; /* time from sync to picture */
- unsigned int right_margin; /* time from picture to sync */
- unsigned int upper_margin; /* time from sync to picture */
- unsigned int lower_margin;
- unsigned int hsync_len; /* length of horizontal sync */
- unsigned int vsync_len; /* length of vertical sync */
- unsigned int sync; /* see FB_SYNC_* */
- unsigned int vmode; /* see FB_VMODE_* */
- unsigned int rotate; /* angle we rotate counter clockwise */
-};
-
-struct fb_info {
- struct fb_var_screeninfo var; /* Current var */
- unsigned int smem_len; /* Length of frame buffer mem */
- unsigned int type; /* see FB_TYPE_* */
- unsigned int line_length; /* length of a line in bytes */
-
- void *screen_base;
- unsigned long screen_size;
-};
-
-struct fb_videomode {
- const char *name; /* optional */
- unsigned int refresh; /* optional */
- unsigned int xres;
- unsigned int yres;
- unsigned int pixclock;
- unsigned int left_margin;
- unsigned int right_margin;
- unsigned int upper_margin;
- unsigned int lower_margin;
- unsigned int hsync_len;
- unsigned int vsync_len;
- unsigned int sync;
- unsigned int vmode;
- unsigned int flag;
-};
+#include <linux/list.h>
+#include <linux/fb.h>
/* This setting is used for the ifm pdm360ng with PRIMEVIEW PM070WL3 */
static struct fb_videomode fsl_diu_mode_800_480 = {
@@ -248,7 +204,7 @@
* point to the framebuffer memory. Memory is aligned as needed.
*/
static struct diu_ad *allocate_fb(unsigned int xres, unsigned int yres,
- unsigned int depth, void **fb)
+ unsigned int depth, char **fb)
{
unsigned long size = xres * yres * depth;
struct diu_addr addr;
@@ -327,10 +283,10 @@
info.var.vsync_len = fsl_diu_mode_db->vsync_len;
info.var.sync = fsl_diu_mode_db->sync;
info.var.vmode = fsl_diu_mode_db->vmode;
- info.line_length = info.var.xres * info.var.bits_per_pixel / 8;
+ info.fix.line_length = info.var.xres * info.var.bits_per_pixel / 8;
/* Memory allocation for framebuffer */
- info.smem_len =
+ info.screen_size =
info.var.xres * info.var.yres * (info.var.bits_per_pixel / 8);
ad = allocate_fb(info.var.xres, info.var.yres,
info.var.bits_per_pixel / 8, &info.screen_base);
diff --git a/drivers/video/ipu.h b/drivers/video/ipu.h
index d8bc287..99a2491 100644
--- a/drivers/video/ipu.h
+++ b/drivers/video/ipu.h
@@ -31,6 +31,7 @@
#define __ASM_ARCH_IPU_H__
#include <linux/types.h>
+#include <ipu_pixfmt.h>
#define IDMA_CHAN_INVALID 0xFF
#define HIGH_RESOLUTION_WIDTH 1024
@@ -89,51 +90,6 @@
IPU_PANEL_TFT,
} ipu_panel_t;
-/* IPU Pixel format definitions */
-#define fourcc(a, b, c, d)\
- (((__u32)(a)<<0)|((__u32)(b)<<8)|((__u32)(c)<<16)|((__u32)(d)<<24))
-
-/*
- * Pixel formats are defined with ASCII FOURCC code. The pixel format codes are
- * the same used by V4L2 API.
- */
-
-#define IPU_PIX_FMT_GENERIC fourcc('I', 'P', 'U', '0')
-#define IPU_PIX_FMT_GENERIC_32 fourcc('I', 'P', 'U', '1')
-#define IPU_PIX_FMT_LVDS666 fourcc('L', 'V', 'D', '6')
-#define IPU_PIX_FMT_LVDS888 fourcc('L', 'V', 'D', '8')
-
-#define IPU_PIX_FMT_RGB332 fourcc('R', 'G', 'B', '1') /*< 8 RGB-3-3-2 */
-#define IPU_PIX_FMT_RGB555 fourcc('R', 'G', 'B', 'O') /*< 16 RGB-5-5-5 */
-#define IPU_PIX_FMT_RGB565 fourcc('R', 'G', 'B', 'P') /*< 1 6 RGB-5-6-5 */
-#define IPU_PIX_FMT_RGB666 fourcc('R', 'G', 'B', '6') /*< 18 RGB-6-6-6 */
-#define IPU_PIX_FMT_BGR666 fourcc('B', 'G', 'R', '6') /*< 18 BGR-6-6-6 */
-#define IPU_PIX_FMT_BGR24 fourcc('B', 'G', 'R', '3') /*< 24 BGR-8-8-8 */
-#define IPU_PIX_FMT_RGB24 fourcc('R', 'G', 'B', '3') /*< 24 RGB-8-8-8 */
-#define IPU_PIX_FMT_BGR32 fourcc('B', 'G', 'R', '4') /*< 32 BGR-8-8-8-8 */
-#define IPU_PIX_FMT_BGRA32 fourcc('B', 'G', 'R', 'A') /*< 32 BGR-8-8-8-8 */
-#define IPU_PIX_FMT_RGB32 fourcc('R', 'G', 'B', '4') /*< 32 RGB-8-8-8-8 */
-#define IPU_PIX_FMT_RGBA32 fourcc('R', 'G', 'B', 'A') /*< 32 RGB-8-8-8-8 */
-#define IPU_PIX_FMT_ABGR32 fourcc('A', 'B', 'G', 'R') /*< 32 ABGR-8-8-8-8 */
-
-/* YUV Interleaved Formats */
-#define IPU_PIX_FMT_YUYV fourcc('Y', 'U', 'Y', 'V') /*< 16 YUV 4:2:2 */
-#define IPU_PIX_FMT_UYVY fourcc('U', 'Y', 'V', 'Y') /*< 16 YUV 4:2:2 */
-#define IPU_PIX_FMT_Y41P fourcc('Y', '4', '1', 'P') /*< 12 YUV 4:1:1 */
-#define IPU_PIX_FMT_YUV444 fourcc('Y', '4', '4', '4') /*< 24 YUV 4:4:4 */
-
-/* two planes -- one Y, one Cb + Cr interleaved */
-#define IPU_PIX_FMT_NV12 fourcc('N', 'V', '1', '2') /* 12 Y/CbCr 4:2:0 */
-
-#define IPU_PIX_FMT_GREY fourcc('G', 'R', 'E', 'Y') /*< 8 Greyscale */
-#define IPU_PIX_FMT_YVU410P fourcc('Y', 'V', 'U', '9') /*< 9 YVU 4:1:0 */
-#define IPU_PIX_FMT_YUV410P fourcc('Y', 'U', 'V', '9') /*< 9 YUV 4:1:0 */
-#define IPU_PIX_FMT_YVU420P fourcc('Y', 'V', '1', '2') /*< 12 YVU 4:2:0 */
-#define IPU_PIX_FMT_YUV420P fourcc('I', '4', '2', '0') /*< 12 YUV 4:2:0 */
-#define IPU_PIX_FMT_YUV420P2 fourcc('Y', 'U', '1', '2') /*< 12 YUV 4:2:0 */
-#define IPU_PIX_FMT_YVU422P fourcc('Y', 'V', '1', '6') /*< 16 YVU 4:2:2 */
-#define IPU_PIX_FMT_YUV422P fourcc('4', '2', '2', 'P') /*< 16 YUV 4:2:2 */
-
/*
* IPU Driver channels definitions.
* Note these are different from IDMA channels
diff --git a/drivers/video/mx3fb.c b/drivers/video/mx3fb.c
index 0c925a0..f30deb3 100644
--- a/drivers/video/mx3fb.c
+++ b/drivers/video/mx3fb.c
@@ -1,6 +1,8 @@
/*
* Copyright (C) 2009
* Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
+ * Copyright (C) 2011
+ * HALE electronic GmbH, <helmut.raiger@hale.at>
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -21,100 +23,20 @@
* MA 02111-1307 USA
*/
#include <common.h>
-#include <lcd.h>
-#include <asm/arch/clock.h>
+#include <malloc.h>
+#include <video_fb.h>
+
#include <asm/arch/imx-regs.h>
+#include <asm/arch/clock.h>
#include <asm/errno.h>
+#include <asm/io.h>
-DECLARE_GLOBAL_DATA_PTR;
+#include "videomodes.h"
-void *lcd_base; /* Start of framebuffer memory */
-void *lcd_console_address; /* Start of console buffer */
-
-int lcd_line_length;
-int lcd_color_fg;
-int lcd_color_bg;
-
-short console_col;
-short console_row;
-
-void lcd_initcolregs(void)
-{
-}
-
-void lcd_setcolreg(ushort regno, ushort red, ushort green, ushort blue)
-{
-}
-
-void lcd_disable(void)
-{
-}
-
-void lcd_panel_disable(void)
-{
-}
-
-#define msleep(a) udelay(a * 1000)
-
-#if defined(CONFIG_DISPLAY_VBEST_VGG322403)
-#define XRES 320
-#define YRES 240
-#define PANEL_TYPE IPU_PANEL_TFT
-#define PIXEL_CLK 156000
-#define PIXEL_FMT IPU_PIX_FMT_RGB666
-#define H_START_WIDTH 20 /* left_margin */
-#define H_SYNC_WIDTH 30 /* hsync_len */
-#define H_END_WIDTH (38 + 30) /* right_margin + hsync_len */
-#define V_START_WIDTH 7 /* upper_margin */
-#define V_SYNC_WIDTH 3 /* vsync_len */
-#define V_END_WIDTH (26 + 3) /* lower_margin + vsync_len */
-#define SIG_POL (DI_D3_DRDY_SHARP_POL | DI_D3_CLK_POL)
+/* this might need panel specific set-up as-well */
#define IF_CONF 0
-#define IF_CLK_DIV 0x175
-#elif defined(CONFIG_DISPLAY_COM57H5M10XRC)
-#define XRES 640
-#define YRES 480
-#define PANEL_TYPE IPU_PANEL_TFT
-#define PIXEL_CLK 40000
-#define PIXEL_FMT IPU_PIX_FMT_RGB666
-#define H_START_WIDTH 120 /* left_margin */
-#define H_SYNC_WIDTH 30 /* hsync_len */
-#define H_END_WIDTH (10 + 30) /* right_margin + hsync_len */
-#define V_START_WIDTH 35 /* upper_margin */
-#define V_SYNC_WIDTH 3 /* vsync_len */
-#define V_END_WIDTH (7 + 3) /* lower_margin + vsync_len */
-#define SIG_POL (DI_D3_DRDY_SHARP_POL | DI_D3_CLK_POL)
-#define IF_CONF 0
-#define IF_CLK_DIV 0x55
-#else
-#define XRES 240
-#define YRES 320
-#define PANEL_TYPE IPU_PANEL_TFT
-#define PIXEL_CLK 185925
-#define PIXEL_FMT IPU_PIX_FMT_RGB666
-#define H_START_WIDTH 9 /* left_margin */
-#define H_SYNC_WIDTH 1 /* hsync_len */
-#define H_END_WIDTH (16 + 1) /* right_margin + hsync_len */
-#define V_START_WIDTH 7 /* upper_margin */
-#define V_SYNC_WIDTH 1 /* vsync_len */
-#define V_END_WIDTH (9 + 1) /* lower_margin + vsync_len */
-#define SIG_POL (DI_D3_DRDY_SHARP_POL | DI_D3_CLK_POL)
-#define IF_CONF 0
-#define IF_CLK_DIV 0x175
-#endif
-#define LCD_COLOR_IPU LCD_COLOR16
-
-static ushort colormap[256];
-
-vidinfo_t panel_info = {
- .vl_col = XRES,
- .vl_row = YRES,
- .vl_bpix = LCD_COLOR_IPU,
- .cmap = colormap,
-};
-
-#define BIT_PER_PIXEL NBITS(LCD_COLOR_IPU)
+/* -------------- controller specific stuff -------------- */
/* IPU DMA Controller channel definitions. */
enum ipu_channel {
@@ -438,89 +360,134 @@
struct chan_param_mem_interleaved ip;
};
-static inline u32 reg_read(unsigned long reg)
-{
- return __REG(reg);
-}
+DECLARE_GLOBAL_DATA_PTR;
-static inline void reg_write(u32 value, unsigned long reg)
-{
- __REG(reg) = value;
-}
+/* graphics setup */
+static GraphicDevice panel;
+static struct ctfb_res_modes *mode;
+static struct ctfb_res_modes var_mode;
/*
* sdc_init_panel() - initialize a synchronous LCD panel.
* @width: width of panel in pixels.
* @height: height of panel in pixels.
- * @pixel_fmt: pixel format of buffer as FOURCC ASCII code.
+ * @di_setup: pixel format of the frame buffer
+ * @di_panel: either SHARP or normal TFT
* @return: 0 on success or negative error code on failure.
*/
-static int sdc_init_panel(u16 width, u16 height, enum pixel_fmt pixel_fmt)
+static int sdc_init_panel(u16 width, u16 height,
+ enum pixel_fmt di_setup, enum ipu_panel di_panel)
{
- u32 reg;
+ u32 reg, div;
uint32_t old_conf;
+ int clock;
+
+ debug("%s(width=%d, height=%d)\n", __func__, width, height);
+
+ /* Init clocking, the IPU receives its clock from the hsp divder */
+ clock = mxc_get_clock(MXC_IPU_CLK);
+ if (clock < 0)
+ return -EACCES;
/* Init panel size and blanking periods */
- reg = ((H_SYNC_WIDTH - 1) << 26) |
- ((u32)(width + H_START_WIDTH + H_END_WIDTH - 1) << 16);
- reg_write(reg, SDC_HOR_CONF);
+ reg = width + mode->left_margin + mode->right_margin - 1;
+ if (reg > 1023) {
+ printf("mx3fb: Display width too large, coerced to 1023!");
+ reg = 1023;
+ }
+ reg = ((mode->hsync_len - 1) << 26) | (reg << 16);
+ writel(reg, SDC_HOR_CONF);
- reg = ((V_SYNC_WIDTH - 1) << 26) | SDC_V_SYNC_WIDTH_L |
- ((u32)(height + V_START_WIDTH + V_END_WIDTH - 1) << 16);
- reg_write(reg, SDC_VER_CONF);
+ reg = height + mode->upper_margin + mode->lower_margin - 1;
+ if (reg > 1023) {
+ printf("mx3fb: Display height too large, coerced to 1023!");
+ reg = 1023;
+ }
+ reg = ((mode->vsync_len - 1) << 26) | SDC_V_SYNC_WIDTH_L | (reg << 16);
+ writel(reg, SDC_VER_CONF);
- switch (PANEL_TYPE) {
+ switch (di_panel) {
case IPU_PANEL_SHARP_TFT:
- reg_write(0x00FD0102L, SDC_SHARP_CONF_1);
- reg_write(0x00F500F4L, SDC_SHARP_CONF_2);
- reg_write(SDC_COM_SHARP | SDC_COM_TFT_COLOR, SDC_COM_CONF);
+ writel(0x00FD0102L, SDC_SHARP_CONF_1);
+ writel(0x00F500F4L, SDC_SHARP_CONF_2);
+ writel(SDC_COM_SHARP | SDC_COM_TFT_COLOR, SDC_COM_CONF);
+ /* TODO: probably IF_CONF must be adapted (see below)! */
break;
case IPU_PANEL_TFT:
- reg_write(SDC_COM_TFT_COLOR, SDC_COM_CONF);
+ writel(SDC_COM_TFT_COLOR, SDC_COM_CONF);
break;
default:
return -EINVAL;
}
- /* Init clocking */
-
/*
- * Calculate divider: fractional part is 4 bits so simply multiple by
- * 2^4 to get fractional part, as long as we stay under ~250MHz and on
- * i.MX31 it (HSP_CLK) is <= 178MHz. Currently 128.267MHz
+ * Calculate divider: The fractional part is 4 bits so simply
+ * multiple by 2^4 to get it.
+ *
+ * Opposed to the kernel driver mode->pixclock is the time of one
+ * pixel in pico seconds, so:
+ * pixel_clk = 1e12 / mode->pixclock
+ * div = ipu_clk * 16 / pixel_clk
+ * leads to:
+ * div = ipu_clk * 16 / (1e12 / mode->pixclock)
+ * or:
+ * div = ipu_clk * 16 * mode->pixclock / 1e12
+ *
+ * To avoid integer overflows this is split into 2 shifts and
+ * one divide with sufficient accuracy:
+ * 16*1024*128*476837 = 0.9999996682e12
*/
+ div = ((clock/1024) * (mode->pixclock/128)) / 476837;
+ debug("hsp_clk is %d, div=%d\n", clock, div);
+ /* coerce to not less than 4.0, not more than 255.9375 */
+ if (div < 0x40)
+ div = 0x40;
+ else if (div > 0xFFF)
+ div = 0xFFF;
+ /* DISP3_IF_CLK_DOWN_WR is half the divider value and 2 less
+ * fraction bits. Subtract 1 extra from DISP3_IF_CLK_DOWN_WR
+ * based on timing debug DISP3_IF_CLK_UP_WR is 0
+ */
+ writel((((div / 8) - 1) << 22) | div, DI_DISP3_TIME_CONF);
- reg_write((((IF_CLK_DIV / 8) - 1) << 22) |
- IF_CLK_DIV, DI_DISP3_TIME_CONF);
+ /* DI settings for display 3: clock idle (bit 26) during vsync */
+ old_conf = readl(DI_DISP_IF_CONF) & 0x78FFFFFF;
+ writel(old_conf | IF_CONF, DI_DISP_IF_CONF);
- /* DI settings */
- old_conf = reg_read(DI_DISP_IF_CONF) & 0x78FFFFFF;
- reg_write(old_conf | IF_CONF, DI_DISP_IF_CONF);
+ /* only set display 3 polarity bits */
+ old_conf = readl(DI_DISP_SIG_POL) & 0xE0FFFFFF;
+ writel(old_conf | mode->sync, DI_DISP_SIG_POL);
- old_conf = reg_read(DI_DISP_SIG_POL) & 0xE0FFFFFF;
- reg_write(old_conf | SIG_POL, DI_DISP_SIG_POL);
+ writel(fmt_cfg[di_setup].b0, DI_DISP3_B0_MAP);
+ writel(fmt_cfg[di_setup].b1, DI_DISP3_B1_MAP);
+ writel(fmt_cfg[di_setup].b2, DI_DISP3_B2_MAP);
+ writel(readl(DI_DISP_ACC_CC) |
+ ((fmt_cfg[di_setup].acc - 1) << 12), DI_DISP_ACC_CC);
- reg_write(fmt_cfg[pixel_fmt].b0, DI_DISP3_B0_MAP);
- reg_write(fmt_cfg[pixel_fmt].b1, DI_DISP3_B1_MAP);
- reg_write(fmt_cfg[pixel_fmt].b2, DI_DISP3_B2_MAP);
- reg_write(reg_read(DI_DISP_ACC_CC) |
- ((fmt_cfg[pixel_fmt].acc - 1) << 12), DI_DISP_ACC_CC);
+ debug("DI_DISP_IF_CONF = 0x%08X\n", readl(DI_DISP_IF_CONF));
+ debug("DI_DISP_SIG_POL = 0x%08X\n", readl(DI_DISP_SIG_POL));
+ debug("DI_DISP3_TIME_CONF = 0x%08X\n", readl(DI_DISP3_TIME_CONF));
+ debug("SDC_HOR_CONF = 0x%08X\n", readl(SDC_HOR_CONF));
+ debug("SDC_VER_CONF = 0x%08X\n", readl(SDC_VER_CONF));
return 0;
}
static void ipu_ch_param_set_size(union chan_param_mem *params,
- uint32_t pixel_fmt, uint16_t width,
+ uint pixelfmt, uint16_t width,
uint16_t height, uint16_t stride)
{
+ debug("%s(pixelfmt=%d, width=%d, height=%d, stride=%d)\n",
+ __func__, pixelfmt, width, height, stride);
+
params->pp.fw = width - 1;
params->pp.fh_l = height - 1;
params->pp.fh_h = (height - 1) >> 8;
params->pp.sl = stride - 1;
/* See above, for further formats see the Linux driver */
- switch (pixel_fmt) {
- case IPU_PIX_FMT_RGB565:
+ switch (pixelfmt) {
+ case GDF_16BIT_565RGB:
params->ip.bpp = 2;
params->ip.pfs = 4;
params->ip.npb = 7;
@@ -533,7 +500,7 @@
params->ip.wid1 = 5; /* Green bit width - 1 */
params->ip.wid2 = 4; /* Blue bit width - 1 */
break;
- case IPU_PIX_FMT_RGB24:
+ case GDF_32BIT_X888RGB:
params->ip.bpp = 1; /* 24 BPP & RGB PFS */
params->ip.pfs = 4;
params->ip.npb = 7;
@@ -547,6 +514,7 @@
params->ip.wid2 = 7; /* Blue bit width - 1 */
break;
default:
+ printf("mx3fb: Pixel format not supported!\n");
break;
}
@@ -564,8 +532,8 @@
uint32_t num_words)
{
for (; num_words > 0; num_words--) {
- reg_write(addr, IPU_IMA_ADDR);
- reg_write(*data++, IPU_IMA_DATA);
+ writel(addr, IPU_IMA_ADDR);
+ writel(*data++, IPU_IMA_DATA);
addr++;
if ((addr & 0x7) == 5) {
addr &= ~0x7; /* set to word 0 */
@@ -574,16 +542,6 @@
}
}
-static uint32_t bpp_to_pixfmt(int bpp)
-{
- switch (bpp) {
- case 16:
- return IPU_PIX_FMT_RGB565;
- default:
- return 0;
- }
-}
-
static uint32_t dma_param_addr(enum ipu_channel channel)
{
/* Channel Parameter Memory */
@@ -596,11 +554,13 @@
uint32_t reg;
uint32_t stride_bytes;
- stride_bytes = (XRES * ((BIT_PER_PIXEL + 7) / 8) + 3) & ~3;
+ stride_bytes = (panel.plnSizeX * panel.gdfBytesPP + 3) & ~3;
+
+ debug("%s(channel=%d, fbmem=%p)\n", __func__, channel, fbmem);
/* Build parameter memory data for DMA channel */
- ipu_ch_param_set_size(¶ms, bpp_to_pixfmt(BIT_PER_PIXEL),
- XRES, YRES, stride_bytes);
+ ipu_ch_param_set_size(¶ms, panel.gdfIndex,
+ panel.plnSizeX, panel.plnSizeY, stride_bytes);
ipu_ch_param_set_buffer(¶ms, fbmem, NULL);
params.pp.bam = 0;
/* Some channels (rotation) have restriction on burst length */
@@ -617,22 +577,22 @@
ipu_write_param_mem(dma_param_addr(channel), (uint32_t *)¶ms, 10);
/* Disable double-buffering */
- reg = reg_read(IPU_CHA_DB_MODE_SEL);
+ reg = readl(IPU_CHA_DB_MODE_SEL);
reg &= ~(1UL << channel);
- reg_write(reg, IPU_CHA_DB_MODE_SEL);
+ writel(reg, IPU_CHA_DB_MODE_SEL);
}
static void ipu_channel_set_priority(enum ipu_channel channel,
int prio)
{
- u32 reg = reg_read(IDMAC_CHA_PRI);
+ u32 reg = readl(IDMAC_CHA_PRI);
if (prio)
reg |= 1UL << channel;
else
reg &= ~(1UL << channel);
- reg_write(reg, IDMAC_CHA_PRI);
+ writel(reg, IDMAC_CHA_PRI);
}
/*
@@ -645,7 +605,7 @@
uint32_t reg;
/* Reset to buffer 0 */
- reg_write(1UL << channel, IPU_CHA_CUR_BUF);
+ writel(1UL << channel, IPU_CHA_CUR_BUF);
switch (channel) {
case IDMAC_SDC_0:
@@ -655,8 +615,8 @@
break;
}
- reg = reg_read(IDMAC_CHA_EN);
- reg_write(reg | (1UL << channel), IDMAC_CHA_EN);
+ reg = readl(IDMAC_CHA_EN);
+ writel(reg | (1UL << channel), IDMAC_CHA_EN);
return 0;
}
@@ -665,13 +625,13 @@
{
uint32_t reg;
- reg = reg_read(IPU_CHA_BUF0_RDY);
+ reg = readl(IPU_CHA_BUF0_RDY);
if (reg & (1UL << channel))
return -EACCES;
/* 44.3.3.1.9 - Row Number 1 (WORD1, offset 0) */
- reg_write(dma_param_addr(channel) + 0x0008UL, IPU_IMA_ADDR);
- reg_write((u32)buf, IPU_IMA_DATA);
+ writel(dma_param_addr(channel) + 0x0008UL, IPU_IMA_ADDR);
+ writel((u32)buf, IPU_IMA_DATA);
return 0;
}
@@ -690,7 +650,7 @@
/* ipu_idmac.c::ipu_select_buffer() */
/* Mark buffer 0 as ready. */
- reg_write(1UL << channel, IPU_CHA_BUF0_RDY);
+ writel(1UL << channel, IPU_CHA_BUF0_RDY);
ret = ipu_enable_channel(channel);
@@ -706,8 +666,8 @@
/* mx3fb.c::sdc_fb_init() */
if (ret >= 0) {
- reg = reg_read(SDC_COM_CONF);
- reg_write(reg | SDC_COM_BG_EN, SDC_COM_CONF);
+ reg = readl(SDC_COM_CONF);
+ writel(reg | SDC_COM_BG_EN, SDC_COM_CONF);
}
/*
@@ -715,31 +675,33 @@
* interrupts. Next sdc_set_brightness() is going to be called
* from mx3fb_blank().
*/
- msleep(2);
+ udelay(2000);
}
/*
* mx3fb_set_par() - set framebuffer parameters and change the operating mode.
* @return: 0 on success or negative error code on failure.
+ * TODO: currently only 666 and TFT as DI setup supported
*/
static int mx3fb_set_par(void)
{
int ret;
- ret = sdc_init_panel(XRES, YRES, PIXEL_FMT);
+ ret = sdc_init_panel(panel.plnSizeX, panel.plnSizeY,
+ IPU_PIX_FMT_RGB666, IPU_PANEL_TFT);
if (ret < 0)
return ret;
- reg_write((H_START_WIDTH << 16) | V_START_WIDTH, SDC_BG_POS);
+ writel((mode->left_margin << 16) | mode->upper_margin, SDC_BG_POS);
return 0;
}
-/* References in this function refer to respective Linux kernel sources */
-void lcd_enable(void)
+static void ll_disp3_enable(void *base)
{
u32 reg;
+ debug("%s(base=0x%x)\n", __func__, (u32) base);
/* pcm037.c::mxc_board_init() */
/* Display Interface #3 */
@@ -780,78 +742,191 @@
/* ipu_idmac.c::ipu_idmac_init() */
/* Service request counter to maximum - shouldn't be needed */
- reg_write(0x00000070, IDMAC_CONF);
+ writel(0x00000070, IDMAC_CONF);
/* ipu_idmac.c::ipu_init_channel() */
/* Enable IPU sub modules */
- reg = reg_read(IPU_CONF) | IPU_CONF_SDC_EN | IPU_CONF_DI_EN;
- reg_write(reg, IPU_CONF);
+ reg = readl(IPU_CONF) | IPU_CONF_SDC_EN | IPU_CONF_DI_EN;
+ writel(reg, IPU_CONF);
/* mx3fb.c::init_fb_chan() */
/* set Display Interface clock period */
- reg_write(0x00100010L, DI_HSP_CLK_PER);
+ writel(0x00100010L, DI_HSP_CLK_PER);
/* Might need to trigger HSP clock change - see 44.3.3.8.5 */
/* mx3fb.c::sdc_set_brightness() */
/* This might be board-specific */
- reg_write(0x03000000UL | 255 << 16, SDC_PWM_CTRL);
+ writel(0x03000000UL | 255 << 16, SDC_PWM_CTRL);
/* mx3fb.c::sdc_set_global_alpha() */
/* Use global - not per-pixel - Alpha-blending */
- reg = reg_read(SDC_GW_CTRL) & 0x00FFFFFFL;
- reg_write(reg | ((uint32_t) 0xff << 24), SDC_GW_CTRL);
+ reg = readl(SDC_GW_CTRL) & 0x00FFFFFFL;
+ writel(reg | ((uint32_t) 0xff << 24), SDC_GW_CTRL);
- reg = reg_read(SDC_COM_CONF);
- reg_write(reg | SDC_COM_GLB_A, SDC_COM_CONF);
+ reg = readl(SDC_COM_CONF);
+ writel(reg | SDC_COM_GLB_A, SDC_COM_CONF);
/* mx3fb.c::sdc_set_color_key() */
/* Disable colour-keying for background */
- reg = reg_read(SDC_COM_CONF) &
+ reg = readl(SDC_COM_CONF) &
~(SDC_COM_GWSEL | SDC_COM_KEY_COLOR_G);
- reg_write(reg, SDC_COM_CONF);
+ writel(reg, SDC_COM_CONF);
mx3fb_set_par();
- sdc_enable_channel(lcd_base);
+ sdc_enable_channel(base);
/*
* Linux driver calls sdc_set_brightness() here again,
* once is enough for us
*/
+ debug("%s() done\n", __func__);
}
-void lcd_ctrl_init(void *lcdbase)
-{
- u32 mem_len = XRES * YRES * BIT_PER_PIXEL / 8;
- /*
- * We rely on lcdbase being a physical address, i.e., either MMU off,
- * or 1-to-1 mapping. Might want to add some virt2phys here.
- */
- if (!lcdbase)
- return;
-
- memset(lcdbase, 0, mem_len);
-}
-
+/* ------------------------ public part ------------------- */
ulong calc_fbsize(void)
{
- return ((panel_info.vl_col * panel_info.vl_row *
- NBITS(panel_info.vl_bpix)) / 8) + PAGE_SIZE;
+ return panel.plnSizeX * panel.plnSizeY * panel.gdfBytesPP;
}
-int overwrite_console(void)
+/*
+ * The current implementation is only tested for GDF_16BIT_565RGB!
+ * It was switched from the original CONFIG_LCD setup to CONFIG_VIDEO,
+ * because the lcd code seemed loaded with color table stuff, that
+ * does not relate to most modern TFTs. cfb_console.c looks more
+ * straight forward.
+ * This is the environment setting for the original setup
+ * "unknown=video=ctfb:x:240,y:320,depth:16,mode:0,pclk:185925,le:9,ri:17,
+ * up:7,lo:10,hs:1,vs:1,sync:100663296,vmode:0"
+ * "videomode=unknown"
+ *
+ * Settings for VBEST VGG322403 display:
+ * "videomode=video=ctfb:x:320,y:240,depth:16,mode:0,pclk:156000,
+ * "le:20,ri:68,up:7,lo:29,hs:30,vs:3,sync:100663296,vmode:0"
+ *
+ * Settings for COM57H5M10XRC display:
+ * "videomode=video=ctfb:x:640,y:480,depth:16,mode:0,pclk:40000,
+ * "le:120,ri:40,up:35,lo:10,hs:30,vs:3,sync:100663296,vmode:0"
+ */
+void *video_hw_init(void)
{
- /* Keep stdout / stderr on serial, our LCD is for splashscreen only */
- return 1;
+ char *penv;
+ u32 memsize;
+ unsigned long t1, hsynch, vsynch;
+ int bits_per_pixel, i, tmp, vesa_idx = 0, videomode;
+
+ tmp = 0;
+
+ puts("Video: ");
+
+ videomode = CONFIG_SYS_DEFAULT_VIDEO_MODE;
+ /* get video mode via environment */
+ penv = getenv("videomode");
+ if (penv) {
+ /* decide if it is a string */
+ if (penv[0] <= '9') {
+ videomode = (int) simple_strtoul(penv, NULL, 16);
+ tmp = 1;
+ }
+ } else {
+ tmp = 1;
+ }
+ if (tmp) {
+ /* parameter are vesa modes */
+ /* search params */
+ for (i = 0; i < VESA_MODES_COUNT; i++) {
+ if (vesa_modes[i].vesanr == videomode)
+ break;
+ }
+ if (i == VESA_MODES_COUNT) {
+ printf("No VESA Mode found, switching to mode 0x%x ",
+ CONFIG_SYS_DEFAULT_VIDEO_MODE);
+ i = 0;
+ }
+ mode = (struct ctfb_res_modes *)
+ &res_mode_init[vesa_modes[i].resindex];
+ bits_per_pixel = vesa_modes[i].bits_per_pixel;
+ vesa_idx = vesa_modes[i].resindex;
+ } else {
+ mode = (struct ctfb_res_modes *) &var_mode;
+ bits_per_pixel = video_get_params(mode, penv);
+ }
+
+ /* calculate hsynch and vsynch freq (info only) */
+ t1 = (mode->left_margin + mode->xres +
+ mode->right_margin + mode->hsync_len) / 8;
+ t1 *= 8;
+ t1 *= mode->pixclock;
+ t1 /= 1000;
+ hsynch = 1000000000L / t1;
+ t1 *= (mode->upper_margin + mode->yres +
+ mode->lower_margin + mode->vsync_len);
+ t1 /= 1000;
+ vsynch = 1000000000L / t1;
+
+ /* fill in Graphic device struct */
+ sprintf(panel.modeIdent, "%dx%dx%d %ldkHz %ldHz",
+ mode->xres, mode->yres,
+ bits_per_pixel, (hsynch / 1000), (vsynch / 1000));
+ printf("%s\n", panel.modeIdent);
+ panel.winSizeX = mode->xres;
+ panel.winSizeY = mode->yres;
+ panel.plnSizeX = mode->xres;
+ panel.plnSizeY = mode->yres;
+
+ switch (bits_per_pixel) {
+ case 24:
+ panel.gdfBytesPP = 4;
+ panel.gdfIndex = GDF_32BIT_X888RGB;
+ break;
+ case 16:
+ panel.gdfBytesPP = 2;
+ panel.gdfIndex = GDF_16BIT_565RGB;
+ break;
+ default:
+ panel.gdfBytesPP = 1;
+ panel.gdfIndex = GDF__8BIT_INDEX;
+ break;
+ }
+
+ /* set up Hardware */
+ memsize = calc_fbsize();
+
+ debug("%s() allocating %d bytes\n", __func__, memsize);
+
+ /* fill in missing Graphic device struct */
+ panel.frameAdrs = (u32) malloc(memsize);
+ if (panel.frameAdrs == 0) {
+ printf("%s() malloc(%d) failed\n", __func__, memsize);
+ return 0;
+ }
+ panel.memSize = memsize;
+
+ ll_disp3_enable((void *) panel.frameAdrs);
+ memset((void *) panel.frameAdrs, 0, memsize);
+
+ debug("%s() done, framebuffer at 0x%x, size=%d cleared\n",
+ __func__, panel.frameAdrs, memsize);
+
+ return (void *) &panel;
+}
+
+void video_set_lut(unsigned int index, /* color number */
+ unsigned char r, /* red */
+ unsigned char g, /* green */
+ unsigned char b /* blue */
+ )
+{
+ return;
}
diff --git a/drivers/video/mxc_ipuv3_fb.c b/drivers/video/mxc_ipuv3_fb.c
index a66981c..1bee54c 100644
--- a/drivers/video/mxc_ipuv3_fb.c
+++ b/drivers/video/mxc_ipuv3_fb.c
@@ -27,7 +27,6 @@
* MA 02111-1307 USA
*/
-/* #define DEBUG */
#include <common.h>
#include <asm/errno.h>
#include <linux/string.h>
@@ -35,43 +34,19 @@
#include <linux/fb.h>
#include <asm/io.h>
#include <malloc.h>
-#include <lcd.h>
+#include <video_fb.h>
#include "videomodes.h"
#include "ipu.h"
#include "mxcfb.h"
-DECLARE_GLOBAL_DATA_PTR;
-
-void *lcd_base; /* Start of framebuffer memory */
-void *lcd_console_address; /* Start of console buffer */
-
-int lcd_line_length;
-int lcd_color_fg;
-int lcd_color_bg;
-
-short console_col;
-short console_row;
-
-vidinfo_t panel_info;
-
static int mxcfb_map_video_memory(struct fb_info *fbi);
static int mxcfb_unmap_video_memory(struct fb_info *fbi);
-void lcd_initcolregs(void)
-{
-}
-
-void lcd_setcolreg(ushort regno, ushort red, ushort green, ushort blue)
-{
-}
-
-void lcd_disable(void)
-{
-}
-
-void lcd_panel_disable(void)
-{
-}
+/* graphics setup */
+static GraphicDevice panel;
+static struct fb_videomode *gmode;
+static uint8_t gdisp;
+static uint32_t gpixfmt;
void fb_videomode_to_var(struct fb_var_screeninfo *var,
const struct fb_videomode *mode)
@@ -440,8 +415,8 @@
fbi->fix.line_length;
}
- fbi->screen_base = (char *)lcd_base;
- fbi->fix.smem_start = (unsigned long)lcd_base;
+ fbi->screen_base = (char *)malloc(fbi->fix.smem_len);
+ fbi->fix.smem_start = (unsigned long)fbi->screen_base;
if (fbi->screen_base == 0) {
puts("Unable to allocate framebuffer memory\n");
fbi->fix.smem_len = 0;
@@ -526,7 +501,8 @@
*
* @return Appropriate error code to the kernel common code
*/
-static int mxcfb_probe(u32 interface_pix_fmt, struct fb_videomode *mode)
+static int mxcfb_probe(u32 interface_pix_fmt, uint8_t disp,
+ struct fb_videomode *mode)
{
struct fb_info *fbi;
struct mxcfb_info *mxcfbi;
@@ -550,7 +526,7 @@
mxcfbi->blank = FB_BLANK_POWERDOWN;
}
- mxcfbi->ipu_di = 0;
+ mxcfbi->ipu_di = disp;
ipu_disp_set_global_alpha(mxcfbi->ipu_ch, 1, 0x80);
ipu_disp_set_color_key(mxcfbi->ipu_ch, 0, 0);
@@ -561,12 +537,12 @@
mxcfb_info[mxcfbi->ipu_di] = fbi;
/* Need dummy values until real panel is configured */
- fbi->var.xres = 640;
- fbi->var.yres = 480;
- fbi->var.bits_per_pixel = 16;
mxcfbi->ipu_di_pix_fmt = interface_pix_fmt;
fb_videomode_to_var(&fbi->var, mode);
+ fbi->var.bits_per_pixel = 16;
+ fbi->fix.line_length = fbi->var.xres * (fbi->var.bits_per_pixel / 8);
+ fbi->fix.smem_len = fbi->var.yres_virtual * fbi->fix.line_length;
mxcfb_check_var(&fbi->var, fbi);
@@ -581,19 +557,16 @@
mxcfb_set_par(fbi);
- /* Setting panel_info for lcd */
- panel_info.cmap = NULL;
- panel_info.vl_col = fbi->var.xres;
- panel_info.vl_row = fbi->var.yres;
- panel_info.vl_bpix = LCD_BPP;
+ panel.winSizeX = mode->xres;
+ panel.winSizeY = mode->yres;
+ panel.plnSizeX = mode->xres;
+ panel.plnSizeY = mode->yres;
- lcd_line_length = (panel_info.vl_col * NBITS(panel_info.vl_bpix)) / 8;
+ panel.frameAdrs = (u32)fbi->screen_base;
+ panel.memSize = fbi->screen_size;
- debug("MXC IPUV3 configured\n"
- "XRES = %d YRES = %d BitsXpixel = %d\n",
- panel_info.vl_col,
- panel_info.vl_row,
- panel_info.vl_bpix);
+ panel.gdfBytesPP = 2;
+ panel.gdfIndex = GDF_16BIT_565RGB;
ipu_dump_registers();
@@ -603,29 +576,7 @@
return ret;
}
-int overwrite_console(void)
-{
- /* Keep stdout / stderr on serial, our LCD is for splashscreen only */
- return 1;
-}
-
-void lcd_ctrl_init(void *lcdbase)
-{
- u32 mem_len = panel_info.vl_col *
- panel_info.vl_row *
- NBITS(panel_info.vl_bpix) / 8;
-
- /*
- * We rely on lcdbase being a physical address, i.e., either MMU off,
- * or 1-to-1 mapping. Might want to add some virt2phys here.
- */
- if (!lcdbase)
- return;
-
- memset(lcdbase, 0, mem_len);
-}
-
-int mx51_fb_init(struct fb_videomode *mode)
+void *video_hw_init(void)
{
int ret;
@@ -633,10 +584,26 @@
if (ret)
puts("Error initializing IPU\n");
- lcd_base += 56;
+ ret = mxcfb_probe(gpixfmt, gdisp, gmode);
+ debug("Framebuffer at 0x%x\n", (unsigned int)panel.frameAdrs);
- debug("Framebuffer at 0x%x\n", (unsigned int)lcd_base);
- ret = mxcfb_probe(IPU_PIX_FMT_RGB666, mode);
+ return (void *)&panel;
+}
- return ret;
+void video_set_lut(unsigned int index, /* color number */
+ unsigned char r, /* red */
+ unsigned char g, /* green */
+ unsigned char b /* blue */
+ )
+{
+ return;
+}
+
+int mx51_fb_init(struct fb_videomode *mode, uint8_t disp, uint32_t pixfmt)
+{
+ gmode = mode;
+ gdisp = disp;
+ gpixfmt = pixfmt;
+
+ return 0;
}
diff --git a/include/configs/imx31_phycore.h b/include/configs/imx31_phycore.h
index 61f0534..48bd50b 100644
--- a/include/configs/imx31_phycore.h
+++ b/include/configs/imx31_phycore.h
@@ -53,7 +53,7 @@
/*
* Size of malloc() pool
*/
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024)
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 512 * 1024)
/*
* Hardware drivers
@@ -104,7 +104,8 @@
"mtdparts=" MTDPARTS_DEFAULT "\0" \
"prg_uboot=tftpboot 0x80000000 $(uboot); protect off 0xa0000000 +0x20000; erase 0xa0000000 +0x20000; cp.b 0x80000000 0xa0000000 $(filesize)\0" \
"prg_kernel=tftpboot 0x80000000 $(uimage); erase 0xa0040000 +0x180000; cp.b 0x80000000 0xa0040000 $(filesize)\0" \
- "prg_jffs2=tftpboot 0x80000000 $(jffs2); erase 0xa01c0000 0xa1ffffff; cp.b 0x80000000 0xa01c0000 $(filesize)\0"
+ "prg_jffs2=tftpboot 0x80000000 $(jffs2); erase 0xa01c0000 0xa1ffffff; cp.b 0x80000000 0xa01c0000 $(filesize)\0" \
+ "videomode=video=ctfb:x:240,y:320,depth:16,mode:0,pclk:185925,le:9,ri:17,up:7,lo:10,hs:1,vs:1,sync:1241513985,vmode:0\0"
#define CONFIG_SMC911X 1
@@ -201,15 +202,16 @@
#define CONFIG_S6E63D6 1
-#define CONFIG_LCD 1
-#define CONFIG_VIDEO_MX3 1
-#define CONFIG_SYS_WHITE_ON_BLACK 1
-#define LCD_BPP LCD_COLOR8
-#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE 1
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
-
-#define CONFIG_SPLASH_SCREEN 1
-#define CONFIG_CMD_BMP 1
+#define CONFIG_VIDEO
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_VIDEO_MX3
+#define CONFIG_VIDEO_LOGO
+#define CONFIG_VIDEO_SW_CURSOR
+#define CONFIG_VGA_AS_SINGLE_DEVICE
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#define CONFIG_SPLASH_SCREEN
+#define CONFIG_CMD_BMP
+#define CONFIG_BMP_16BPP
#endif
#endif /* __CONFIG_H */
diff --git a/include/configs/qong.h b/include/configs/qong.h
index e4bc1d0..b1fc80c 100644
--- a/include/configs/qong.h
+++ b/include/configs/qong.h
@@ -79,15 +79,16 @@
#define CONFIG_DNET_BASE (CS1_BASE + QONG_FPGA_PERIPH_SIZE)
/* Framebuffer and LCD */
-#define CONFIG_LCD
+#define CONFIG_VIDEO
+#define CONFIG_CFB_CONSOLE
#define CONFIG_VIDEO_MX3
-#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
+#define CONFIG_VIDEO_LOGO
+#define CONFIG_VIDEO_SW_CURSOR
+#define CONFIG_VGA_AS_SINGLE_DEVICE
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
-#define LCD_BPP LCD_COLOR16
-#define CONFIG_SPLASH_SCREEN
+#define CONFIG_SPLASH_SCREEN
#define CONFIG_CMD_BMP
#define CONFIG_BMP_16BPP
-#define CONFIG_DISPLAY_COM57H5M10XRC
/* USB */
#define CONFIG_CMD_USB
@@ -177,6 +178,9 @@
" +${filesize};cp.b ${fileaddr} " \
xstr(CONFIG_SYS_MONITOR_BASE) " ${filesize}\0" \
"upd=run load update\0" \
+ "videomode=video=ctfb:x:640,y:480,depth:16,mode:0,pclk:40000," \
+ "le:120,ri:40,up:35,lo:10,hs:30,vs:3,sync:100663296," \
+ "vmode:0\0" \
/*
* Miscellaneous configurable options
diff --git a/include/configs/vision2.h b/include/configs/vision2.h
index 540dfa9..3b42afc 100644
--- a/include/configs/vision2.h
+++ b/include/configs/vision2.h
@@ -46,7 +46,7 @@
/*
* Size of malloc() pool
*/
-#define CONFIG_SYS_MALLOC_LEN (2048 * 1024)
+#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024)
/*
* Hardware drivers
@@ -207,12 +207,11 @@
* Framebuffer and LCD
*/
#define CONFIG_PREBOOT
-#define CONFIG_LCD
+#define CONFIG_VIDEO
#define CONFIG_VIDEO_MX5
-#define CONFIG_SYS_CONSOLE_ENV_OVERWRITE
-#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
-#define LCD_BPP LCD_COLOR16
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_VGA_AS_SINGLE_DEVICE
+#define CONFIG_VIDEO_BMP_RLE8
#define CONFIG_SPLASH_SCREEN
#define CONFIG_CMD_BMP
#define CONFIG_BMP_16BPP
diff --git a/include/ipu_pixfmt.h b/include/ipu_pixfmt.h
new file mode 100644
index 0000000..656f605
--- /dev/null
+++ b/include/ipu_pixfmt.h
@@ -0,0 +1,81 @@
+/*
+ * (C) Copyright 2011
+ * Stefano Babic, DENX Software Engineering, sbabic@denx.de
+ *
+ * Based on Linux IPU driver for MX51 (ipu.h):
+ *
+ * (C) Copyright 2005-2010 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __IPU_PIXFMT_H__
+#define __IPU_PIXFMT_H__
+
+#include <linux/list.h>
+#include <linux/fb.h>
+
+/* IPU Pixel format definitions */
+#define fourcc(a, b, c, d)\
+ (((__u32)(a)<<0)|((__u32)(b)<<8)|((__u32)(c)<<16)|((__u32)(d)<<24))
+
+/*
+ * Pixel formats are defined with ASCII FOURCC code. The pixel format codes are
+ * the same used by V4L2 API.
+ */
+
+#define IPU_PIX_FMT_GENERIC fourcc('I', 'P', 'U', '0')
+#define IPU_PIX_FMT_GENERIC_32 fourcc('I', 'P', 'U', '1')
+#define IPU_PIX_FMT_LVDS666 fourcc('L', 'V', 'D', '6')
+#define IPU_PIX_FMT_LVDS888 fourcc('L', 'V', 'D', '8')
+
+#define IPU_PIX_FMT_RGB332 fourcc('R', 'G', 'B', '1') /*< 8 RGB-3-3-2 */
+#define IPU_PIX_FMT_RGB555 fourcc('R', 'G', 'B', 'O') /*< 16 RGB-5-5-5 */
+#define IPU_PIX_FMT_RGB565 fourcc('R', 'G', 'B', 'P') /*< 1 6 RGB-5-6-5 */
+#define IPU_PIX_FMT_RGB666 fourcc('R', 'G', 'B', '6') /*< 18 RGB-6-6-6 */
+#define IPU_PIX_FMT_BGR666 fourcc('B', 'G', 'R', '6') /*< 18 BGR-6-6-6 */
+#define IPU_PIX_FMT_BGR24 fourcc('B', 'G', 'R', '3') /*< 24 BGR-8-8-8 */
+#define IPU_PIX_FMT_RGB24 fourcc('R', 'G', 'B', '3') /*< 24 RGB-8-8-8 */
+#define IPU_PIX_FMT_BGR32 fourcc('B', 'G', 'R', '4') /*< 32 BGR-8-8-8-8 */
+#define IPU_PIX_FMT_BGRA32 fourcc('B', 'G', 'R', 'A') /*< 32 BGR-8-8-8-8 */
+#define IPU_PIX_FMT_RGB32 fourcc('R', 'G', 'B', '4') /*< 32 RGB-8-8-8-8 */
+#define IPU_PIX_FMT_RGBA32 fourcc('R', 'G', 'B', 'A') /*< 32 RGB-8-8-8-8 */
+#define IPU_PIX_FMT_ABGR32 fourcc('A', 'B', 'G', 'R') /*< 32 ABGR-8-8-8-8 */
+
+/* YUV Interleaved Formats */
+#define IPU_PIX_FMT_YUYV fourcc('Y', 'U', 'Y', 'V') /*< 16 YUV 4:2:2 */
+#define IPU_PIX_FMT_UYVY fourcc('U', 'Y', 'V', 'Y') /*< 16 YUV 4:2:2 */
+#define IPU_PIX_FMT_Y41P fourcc('Y', '4', '1', 'P') /*< 12 YUV 4:1:1 */
+#define IPU_PIX_FMT_YUV444 fourcc('Y', '4', '4', '4') /*< 24 YUV 4:4:4 */
+
+/* two planes -- one Y, one Cb + Cr interleaved */
+#define IPU_PIX_FMT_NV12 fourcc('N', 'V', '1', '2') /* 12 Y/CbCr 4:2:0 */
+
+#define IPU_PIX_FMT_GREY fourcc('G', 'R', 'E', 'Y') /*< 8 Greyscale */
+#define IPU_PIX_FMT_YVU410P fourcc('Y', 'V', 'U', '9') /*< 9 YVU 4:1:0 */
+#define IPU_PIX_FMT_YUV410P fourcc('Y', 'U', 'V', '9') /*< 9 YUV 4:1:0 */
+#define IPU_PIX_FMT_YVU420P fourcc('Y', 'V', '1', '2') /*< 12 YVU 4:2:0 */
+#define IPU_PIX_FMT_YUV420P fourcc('I', '4', '2', '0') /*< 12 YUV 4:2:0 */
+#define IPU_PIX_FMT_YUV420P2 fourcc('Y', 'U', '1', '2') /*< 12 YUV 4:2:0 */
+#define IPU_PIX_FMT_YVU422P fourcc('Y', 'V', '1', '6') /*< 16 YVU 4:2:2 */
+#define IPU_PIX_FMT_YUV422P fourcc('4', '2', '2', 'P') /*< 16 YUV 4:2:2 */
+
+int mx51_fb_init(struct fb_videomode *mode, uint8_t disp, uint32_t pixfmt);
+
+#endif
diff --git a/lib/zlib/inffast.c b/lib/zlib/inffast.c
index 8e823df..4834b0c 100644
--- a/lib/zlib/inffast.c
+++ b/lib/zlib/inffast.c
@@ -100,6 +100,14 @@
state = (struct inflate_state FAR *)strm->state;
in = strm->next_in - OFF;
last = in + (strm->avail_in - 5);
+ if (in > last && strm->avail_in > 5) {
+ /*
+ * overflow detected, limit strm->avail_in to the
+ * max. possible size and recalculate last
+ */
+ strm->avail_in = 0xffffffff - (unsigned int)in;
+ last = in + (strm->avail_in - 5);
+ }
out = strm->next_out - OFF;
beg = out - (start - strm->avail_out);
end = out + (strm->avail_out - 257);