arm: ls102xa: Add Freescale LS102xA SoC support
The QorIQ LS1 family is built on Layerscape architecture,
the industry's first software-aware, core-agnostic networking
architecture to offer unprecedented efficiency and scale.
Freescale LS102xA is a set of SoCs combines two ARM
Cortex-A7 cores that have been optimized for high
reliability and pack the highest level of integration
available for sub-3 W embedded communications processors
with Layerscape architecture and with a comprehensive
enablement model focused on ease of programmability.
Signed-off-by: Alison Wang <alison.wang@freescale.com>
Signed-off-by: Jason Jin <jason.jin@freescale.com>
Signed-off-by: Jingchang Lu <jingchang.lu@freescale.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
diff --git a/arch/arm/include/asm/arch-ls102xa/clock.h b/arch/arm/include/asm/arch-ls102xa/clock.h
new file mode 100644
index 0000000..fd36bb0
--- /dev/null
+++ b/arch/arm/include/asm/arch-ls102xa/clock.h
@@ -0,0 +1,23 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ *
+ */
+
+#ifndef __ASM_ARCH_LS102XA_CLOCK_H_
+#define __ASM_ARCH_LS102XA_CLOCK_H_
+
+#include <common.h>
+
+enum mxc_clock {
+ MXC_ARM_CLK = 0,
+ MXC_UART_CLK,
+ MXC_ESDHC_CLK,
+ MXC_I2C_CLK,
+ MXC_DSPI_CLK,
+};
+
+unsigned int mxc_get_clock(enum mxc_clock clk);
+
+#endif /* __ASM_ARCH_LS102XA_CLOCK_H_ */
diff --git a/arch/arm/include/asm/arch-ls102xa/config.h b/arch/arm/include/asm/arch-ls102xa/config.h
new file mode 100644
index 0000000..08c21af
--- /dev/null
+++ b/arch/arm/include/asm/arch-ls102xa/config.h
@@ -0,0 +1,74 @@
+/*
+ * Copyright 2014, Freescale Semiconductor
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _ASM_ARMV7_LS102XA_CONFIG_
+#define _ASM_ARMV7_LS102XA_CONFIG_
+
+#define CONFIG_SYS_CACHELINE_SIZE 64
+
+#define OCRAM_BASE_ADDR 0x10000000
+#define OCRAM_SIZE 0x00020000
+
+#define CONFIG_SYS_IMMR 0x01000000
+
+#define CONFIG_SYS_FSL_DDR_ADDR (CONFIG_SYS_IMMR + 0x00080000)
+#define CONFIG_SYS_CCI400_ADDR (CONFIG_SYS_IMMR + 0x00180000)
+#define CONFIG_SYS_IFC_ADDR (CONFIG_SYS_IMMR + 0x00530000)
+#define CONFIG_SYS_FSL_ESDHC_ADDR (CONFIG_SYS_IMMR + 0x00560000)
+#define CONFIG_SYS_FSL_SCFG_ADDR (CONFIG_SYS_IMMR + 0x00570000)
+#define CONFIG_SYS_FSL_SERDES_ADDR (CONFIG_SYS_IMMR + 0x00ea0000)
+#define CONFIG_SYS_FSL_GUTS_ADDR (CONFIG_SYS_IMMR + 0x00ee0000)
+#define CONFIG_SYS_FSL_LS1_CLK_ADDR (CONFIG_SYS_IMMR + 0x00ee1000)
+#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR + 0x011c0500)
+#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR + 0x011d0500)
+
+#define CONFIG_SYS_TSEC1_OFFSET 0x01d10000
+#define CONFIG_SYS_TSEC2_OFFSET 0x01d50000
+#define CONFIG_SYS_TSEC3_OFFSET 0x01d90000
+#define CONFIG_SYS_MDIO1_OFFSET 0x01d24000
+
+#define TSEC_BASE_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_TSEC1_OFFSET)
+#define MDIO_BASE_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MDIO1_OFFSET)
+
+#define SCTR_BASE_ADDR (CONFIG_SYS_IMMR + 0x01b00000)
+
+#define I2C1_BASE_ADDR (CONFIG_SYS_IMMR + 0x01180000)
+#define I2C2_BASE_ADDR (CONFIG_SYS_IMMR + 0x01190000)
+#define I2C3_BASE_ADDR (CONFIG_SYS_IMMR + 0x011a0000)
+
+#define WDOG1_BASE_ADDR (CONFIG_SYS_IMMR + 0x01ad0000)
+
+#define QSPI0_BASE_ADDR (CONFIG_SYS_IMMR + 0x00550000)
+#define DSPI1_BASE_ADDR (CONFIG_SYS_IMMR + 0x01100000)
+
+#define LPUART_BASE (CONFIG_SYS_IMMR + 0x01950000)
+
+#ifdef CONFIG_DDR_SPD
+#define CONFIG_SYS_FSL_DDR_BE
+#define CONFIG_VERY_BIG_RAM
+#define CONFIG_SYS_FSL_DDRC_ARM_GEN3
+#define CONFIG_SYS_FSL_DDR
+#define CONFIG_SYS_LS1_DDR_BLOCK1_SIZE ((phys_size_t)2 << 30)
+#define CONFIG_MAX_MEM_MAPPED CONFIG_SYS_LS1_DDR_BLOCK1_SIZE
+#endif
+
+#define CONFIG_SYS_FSL_IFC_BE
+#define CONFIG_SYS_FSL_ESDHC_BE
+#define CONFIG_SYS_FSL_WDOG_BE
+#define CONFIG_SYS_FSL_DSPI_BE
+#define CONFIG_SYS_FSL_QSPI_BE
+
+#define CONFIG_SYS_FSL_SRDS_1
+
+#ifdef CONFIG_LS102XA
+#define CONFIG_MAX_CPUS 2
+#define CONFIG_SYS_FSL_IFC_BANK_COUNT 8
+#define CONFIG_NUM_DDR_CONTROLLERS 1
+#else
+#error SoC not defined
+#endif
+
+#endif /* _ASM_ARMV7_LS102XA_CONFIG_ */
diff --git a/arch/arm/include/asm/arch-ls102xa/fsl_serdes.h b/arch/arm/include/asm/arch-ls102xa/fsl_serdes.h
new file mode 100644
index 0000000..3a92f5a
--- /dev/null
+++ b/arch/arm/include/asm/arch-ls102xa/fsl_serdes.h
@@ -0,0 +1,33 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __FSL_SERDES_H
+#define __FSL_SERDES_H
+
+#include <config.h>
+
+enum srds_prtcl {
+ NONE = 0,
+ PCIE1,
+ PCIE2,
+ SATA1,
+ SGMII_TSEC1,
+ SGMII_TSEC2,
+};
+
+enum srds {
+ FSL_SRDS_1 = 0,
+ FSL_SRDS_2 = 1,
+};
+
+int is_serdes_configured(enum srds_prtcl device);
+void fsl_serdes_init(void);
+const char *serdes_clock_to_string(u32 clock);
+
+int serdes_get_first_lane(u32 sd, enum srds_prtcl device);
+enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane);
+
+#endif /* __FSL_SERDES_H */
diff --git a/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h b/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h
new file mode 100644
index 0000000..7995fe2
--- /dev/null
+++ b/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h
@@ -0,0 +1,493 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __ASM_ARCH_LS102XA_IMMAP_H_
+#define __ASM_ARCH_LS102XA_IMMAP_H_
+
+#define SVR_MAJ(svr) (((svr) >> 4) & 0xf)
+#define SVR_MIN(svr) (((svr) >> 0) & 0xf)
+#define SVR_SOC_VER(svr) (((svr) >> 8) & 0x7ff)
+#define IS_E_PROCESSOR(svr) (svr & 0x80000)
+
+#define SOC_VER_SLS1020 0x00
+#define SOC_VER_LS1020 0x10
+#define SOC_VER_LS1021 0x11
+#define SOC_VER_LS1022 0x12
+
+#define RCWSR0_SYS_PLL_RAT_SHIFT 25
+#define RCWSR0_SYS_PLL_RAT_MASK 0x1f
+#define RCWSR0_MEM_PLL_RAT_SHIFT 16
+#define RCWSR0_MEM_PLL_RAT_MASK 0x3f
+
+#define RCWSR4_SRDS1_PRTCL_SHIFT 24
+#define RCWSR4_SRDS1_PRTCL_MASK 0xff000000
+
+#define TIMER_COMP_VAL 0xffffffff
+#define ARCH_TIMER_CTRL_ENABLE (1 << 0)
+#define SYS_COUNTER_CTRL_ENABLE (1 << 24)
+
+struct sys_info {
+ unsigned long freq_processor[CONFIG_MAX_CPUS];
+ unsigned long freq_systembus;
+ unsigned long freq_ddrbus;
+ unsigned long freq_localbus;
+};
+
+/* Device Configuration and Pin Control */
+struct ccsr_gur {
+ u32 porsr1; /* POR status 1 */
+ u32 porsr2; /* POR status 2 */
+ u8 res_008[0x20-0x8];
+ u32 gpporcr1; /* General-purpose POR configuration */
+ u32 gpporcr2;
+ u32 dcfg_fusesr; /* Fuse status register */
+ u8 res_02c[0x70-0x2c];
+ u32 devdisr; /* Device disable control */
+ u32 devdisr2; /* Device disable control 2 */
+ u32 devdisr3; /* Device disable control 3 */
+ u32 devdisr4; /* Device disable control 4 */
+ u32 devdisr5; /* Device disable control 5 */
+ u8 res_084[0x94-0x84];
+ u32 coredisru; /* uppper portion for support of 64 cores */
+ u32 coredisrl; /* lower portion for support of 64 cores */
+ u8 res_09c[0xa4-0x9c];
+ u32 svr; /* System version */
+ u8 res_0a8[0xb0-0xa8];
+ u32 rstcr; /* Reset control */
+ u32 rstrqpblsr; /* Reset request preboot loader status */
+ u8 res_0b8[0xc0-0xb8];
+ u32 rstrqmr1; /* Reset request mask */
+ u8 res_0c4[0xc8-0xc4];
+ u32 rstrqsr1; /* Reset request status */
+ u8 res_0cc[0xd4-0xcc];
+ u32 rstrqwdtmrl; /* Reset request WDT mask */
+ u8 res_0d8[0xdc-0xd8];
+ u32 rstrqwdtsrl; /* Reset request WDT status */
+ u8 res_0e0[0xe4-0xe0];
+ u32 brrl; /* Boot release */
+ u8 res_0e8[0x100-0xe8];
+ u32 rcwsr[16]; /* Reset control word status */
+ u8 res_140[0x200-0x140];
+ u32 scratchrw[4]; /* Scratch Read/Write */
+ u8 res_210[0x300-0x210];
+ u32 scratchw1r[4]; /* Scratch Read (Write once) */
+ u8 res_310[0x400-0x310];
+ u32 crstsr;
+ u8 res_404[0x550-0x404];
+ u32 sataliodnr;
+ u8 res_554[0x604-0x554];
+ u32 pamubypenr;
+ u32 dmacr1;
+ u8 res_60c[0x740-0x60c]; /* add more registers when needed */
+ u32 tp_ityp[64]; /* Topology Initiator Type Register */
+ struct {
+ u32 upper;
+ u32 lower;
+ } tp_cluster[1]; /* Core Cluster n Topology Register */
+ u8 res_848[0xe60-0x848];
+ u32 ddrclkdr;
+ u8 res_e60[0xe68-0xe64];
+ u32 ifcclkdr;
+ u8 res_e68[0xe80-0xe6c];
+ u32 sdhcpcr;
+};
+
+#define SCFG_SCFGREVCR_REV 0xffffffff
+#define SCFG_SCFGREVCR_NOREV 0
+#define SCFG_ETSECDMAMCR_LE_BD_FR 0xf8001a0f
+#define SCFG_ETSECCMCR_GE2_CLK125 0x04000000
+#define SCFG_PIXCLKCR_PXCKEN 0x80000000
+
+/* Supplemental Configuration Unit */
+struct ccsr_scfg {
+ u32 dpslpcr;
+ u32 resv0[2];
+ u32 etsecclkdpslpcr;
+ u32 resv1[5];
+ u32 fuseovrdcr;
+ u32 pixclkcr;
+ u32 resv2[5];
+ u32 spimsicr;
+ u32 resv3[6];
+ u32 pex1pmwrcr;
+ u32 pex1pmrdsr;
+ u32 resv4[3];
+ u32 usb3prm1cr;
+ u32 usb4prm2cr;
+ u32 pex1rdmsgpldlsbsr;
+ u32 pex1rdmsgpldmsbsr;
+ u32 pex2rdmsgpldlsbsr;
+ u32 pex2rdmsgpldmsbsr;
+ u32 pex1rdmmsgrqsr;
+ u32 pex2rdmmsgrqsr;
+ u32 spimsiclrcr;
+ u32 pex1mscportsr;
+ u32 pex2mscportsr;
+ u32 pex2pmwrcr;
+ u32 resv5[24];
+ u32 mac1_streamid;
+ u32 mac2_streamid;
+ u32 mac3_streamid;
+ u32 pex1_streamid;
+ u32 pex2_streamid;
+ u32 dma_streamid;
+ u32 sata_streamid;
+ u32 usb3_streamid;
+ u32 qe_streamid;
+ u32 sdhc_streamid;
+ u32 adma_streamid;
+ u32 letechsftrstcr;
+ u32 core0_sft_rst;
+ u32 core1_sft_rst;
+ u32 resv6[1];
+ u32 usb_hi_addr;
+ u32 etsecclkadjcr;
+ u32 sai_clk;
+ u32 resv7[1];
+ u32 dcu_streamid;
+ u32 usb2_streamid;
+ u32 ftm_reset;
+ u32 altcbar;
+ u32 qspi_cfg;
+ u32 pmcintecr;
+ u32 pmcintlecr;
+ u32 pmcintsr;
+ u32 qos1;
+ u32 qos2;
+ u32 qos3;
+ u32 cci_cfg;
+ u32 resv8[1];
+ u32 etsecdmamcr;
+ u32 usb3prm3cr;
+ u32 resv9[1];
+ u32 debug_streamid;
+ u32 resv10[5];
+ u32 snpcnfgcr;
+ u32 resv11[1];
+ u32 intpcr;
+ u32 resv12[20];
+ u32 scfgrevcr;
+ u32 coresrencr;
+ u32 pex2pmrdsr;
+ u32 ddrc1cr;
+ u32 ddrc2cr;
+ u32 ddrc3cr;
+ u32 ddrc4cr;
+ u32 ddrgcr;
+ u32 resv13[120];
+ u32 qeioclkcr;
+ u32 etsecmcr;
+ u32 sdhciovserlcr;
+ u32 resv14[61];
+ u32 sparecr;
+};
+
+/* Clocking */
+struct ccsr_clk {
+ struct {
+ u32 clkcncsr; /* core cluster n clock control status */
+ u8 res_004[0x1c];
+ } clkcsr[2];
+ u8 res_040[0x7c0]; /* 0x100 */
+ struct {
+ u32 pllcngsr;
+ u8 res_804[0x1c];
+ } pllcgsr[2];
+ u8 res_840[0x1c0];
+ u32 clkpcsr; /* 0xa00 Platform clock domain control/status */
+ u8 res_a04[0x1fc];
+ u32 pllpgsr; /* 0xc00 Platform PLL General Status */
+ u8 res_c04[0x1c];
+ u32 plldgsr; /* 0xc20 DDR PLL General Status */
+ u8 res_c24[0x3dc];
+};
+
+/* System Counter */
+struct sctr_regs {
+ u32 cntcr;
+ u32 cntsr;
+ u32 cntcv1;
+ u32 cntcv2;
+ u32 resv1[4];
+ u32 cntfid0;
+ u32 cntfid1;
+ u32 resv2[1002];
+ u32 counterid[12];
+};
+
+#define MAX_SERDES 1
+#define SRDS_MAX_LANES 4
+#define SRDS_MAX_BANK 2
+
+#define SRDS_RSTCTL_RST 0x80000000
+#define SRDS_RSTCTL_RSTDONE 0x40000000
+#define SRDS_RSTCTL_RSTERR 0x20000000
+#define SRDS_RSTCTL_SWRST 0x10000000
+#define SRDS_RSTCTL_SDEN 0x00000020
+#define SRDS_RSTCTL_SDRST_B 0x00000040
+#define SRDS_RSTCTL_PLLRST_B 0x00000080
+#define SRDS_PLLCR0_POFF 0x80000000
+#define SRDS_PLLCR0_RFCK_SEL_MASK 0x70000000
+#define SRDS_PLLCR0_RFCK_SEL_100 0x00000000
+#define SRDS_PLLCR0_RFCK_SEL_125 0x10000000
+#define SRDS_PLLCR0_RFCK_SEL_156_25 0x20000000
+#define SRDS_PLLCR0_RFCK_SEL_150 0x30000000
+#define SRDS_PLLCR0_RFCK_SEL_161_13 0x40000000
+#define SRDS_PLLCR0_RFCK_SEL_122_88 0x50000000
+#define SRDS_PLLCR0_PLL_LCK 0x00800000
+#define SRDS_PLLCR0_FRATE_SEL_MASK 0x000f0000
+#define SRDS_PLLCR0_FRATE_SEL_5 0x00000000
+#define SRDS_PLLCR0_FRATE_SEL_3_75 0x00050000
+#define SRDS_PLLCR0_FRATE_SEL_5_15 0x00060000
+#define SRDS_PLLCR0_FRATE_SEL_4 0x00070000
+#define SRDS_PLLCR0_FRATE_SEL_3_12 0x00090000
+#define SRDS_PLLCR0_FRATE_SEL_3 0x000a0000
+#define SRDS_PLLCR1_PLL_BWSEL 0x08000000
+
+struct ccsr_serdes {
+ struct {
+ u32 rstctl; /* Reset Control Register */
+
+ u32 pllcr0; /* PLL Control Register 0 */
+
+ u32 pllcr1; /* PLL Control Register 1 */
+ u32 res_0c; /* 0x00c */
+ u32 pllcr3;
+ u32 pllcr4;
+ u8 res_18[0x20-0x18];
+ } bank[2];
+ u8 res_40[0x90-0x40];
+ u32 srdstcalcr; /* 0x90 TX Calibration Control */
+ u8 res_94[0xa0-0x94];
+ u32 srdsrcalcr; /* 0xa0 RX Calibration Control */
+ u8 res_a4[0xb0-0xa4];
+ u32 srdsgr0; /* 0xb0 General Register 0 */
+ u8 res_b4[0xe0-0xb4];
+ u32 srdspccr0; /* 0xe0 Protocol Converter Config 0 */
+ u32 srdspccr1; /* 0xe4 Protocol Converter Config 1 */
+ u32 srdspccr2; /* 0xe8 Protocol Converter Config 2 */
+ u32 srdspccr3; /* 0xec Protocol Converter Config 3 */
+ u32 srdspccr4; /* 0xf0 Protocol Converter Config 4 */
+ u8 res_f4[0x100-0xf4];
+ struct {
+ u32 lnpssr; /* 0x100, 0x120, ..., 0x1e0 */
+ u8 res_104[0x120-0x104];
+ } srdslnpssr[4];
+ u8 res_180[0x300-0x180];
+ u32 srdspexeqcr;
+ u32 srdspexeqpcr[11];
+ u8 res_330[0x400-0x330];
+ u32 srdspexapcr;
+ u8 res_404[0x440-0x404];
+ u32 srdspexbpcr;
+ u8 res_444[0x800-0x444];
+ struct {
+ u32 gcr0; /* 0x800 General Control Register 0 */
+ u32 gcr1; /* 0x804 General Control Register 1 */
+ u32 gcr2; /* 0x808 General Control Register 2 */
+ u32 sscr0;
+ u32 recr0; /* 0x810 Receive Equalization Control */
+ u32 recr1;
+ u32 tecr0; /* 0x818 Transmit Equalization Control */
+ u32 sscr1;
+ u32 ttlcr0; /* 0x820 Transition Tracking Loop Ctrl 0 */
+ u8 res_824[0x83c-0x824];
+ u32 tcsr3;
+ } lane[4]; /* Lane A, B, C, D, E, F, G, H */
+ u8 res_a00[0x1000-0xa00]; /* from 0xa00 to 0xfff */
+};
+
+#define DDR_SDRAM_CFG 0x470c0008
+#define DDR_CS0_BNDS 0x008000bf
+#define DDR_CS0_CONFIG 0x80014302
+#define DDR_TIMING_CFG_0 0x50550004
+#define DDR_TIMING_CFG_1 0xbcb38c56
+#define DDR_TIMING_CFG_2 0x0040d120
+#define DDR_TIMING_CFG_3 0x010e1000
+#define DDR_TIMING_CFG_4 0x00000001
+#define DDR_TIMING_CFG_5 0x03401400
+#define DDR_SDRAM_CFG_2 0x00401010
+#define DDR_SDRAM_MODE 0x00061c60
+#define DDR_SDRAM_MODE_2 0x00180000
+#define DDR_SDRAM_INTERVAL 0x18600618
+#define DDR_DDR_WRLVL_CNTL 0x8655f605
+#define DDR_DDR_WRLVL_CNTL_2 0x05060607
+#define DDR_DDR_WRLVL_CNTL_3 0x05050505
+#define DDR_DDR_CDR1 0x80040000
+#define DDR_DDR_CDR2 0x00000001
+#define DDR_SDRAM_CLK_CNTL 0x02000000
+#define DDR_DDR_ZQ_CNTL 0x89080600
+#define DDR_CS0_CONFIG_2 0
+#define DDR_SDRAM_CFG_MEM_EN 0x80000000
+
+/* DDR memory controller registers */
+struct ccsr_ddr {
+ u32 cs0_bnds; /* Chip Select 0 Memory Bounds */
+ u32 resv1[1];
+ u32 cs1_bnds; /* Chip Select 1 Memory Bounds */
+ u32 resv2[1];
+ u32 cs2_bnds; /* Chip Select 2 Memory Bounds */
+ u32 resv3[1];
+ u32 cs3_bnds; /* Chip Select 3 Memory Bounds */
+ u32 resv4[25];
+ u32 cs0_config; /* Chip Select Configuration */
+ u32 cs1_config; /* Chip Select Configuration */
+ u32 cs2_config; /* Chip Select Configuration */
+ u32 cs3_config; /* Chip Select Configuration */
+ u32 resv5[12];
+ u32 cs0_config_2; /* Chip Select Configuration 2 */
+ u32 cs1_config_2; /* Chip Select Configuration 2 */
+ u32 cs2_config_2; /* Chip Select Configuration 2 */
+ u32 cs3_config_2; /* Chip Select Configuration 2 */
+ u32 resv6[12];
+ u32 timing_cfg_3; /* SDRAM Timing Configuration 3 */
+ u32 timing_cfg_0; /* SDRAM Timing Configuration 0 */
+ u32 timing_cfg_1; /* SDRAM Timing Configuration 1 */
+ u32 timing_cfg_2; /* SDRAM Timing Configuration 2 */
+ u32 sdram_cfg; /* SDRAM Control Configuration */
+ u32 sdram_cfg_2; /* SDRAM Control Configuration 2 */
+ u32 sdram_mode; /* SDRAM Mode Configuration */
+ u32 sdram_mode_2; /* SDRAM Mode Configuration 2 */
+ u32 sdram_md_cntl; /* SDRAM Mode Control */
+ u32 sdram_interval; /* SDRAM Interval Configuration */
+ u32 sdram_data_init; /* SDRAM Data initialization */
+ u32 resv7[1];
+ u32 sdram_clk_cntl; /* SDRAM Clock Control */
+ u32 resv8[5];
+ u32 init_addr; /* training init addr */
+ u32 init_ext_addr; /* training init extended addr */
+ u32 resv9[4];
+ u32 timing_cfg_4; /* SDRAM Timing Configuration 4 */
+ u32 timing_cfg_5; /* SDRAM Timing Configuration 5 */
+ u32 timing_cfg_6; /* SDRAM Timing Configuration 6 */
+ u32 timing_cfg_7; /* SDRAM Timing Configuration 7 */
+ u32 ddr_zq_cntl; /* ZQ calibration control*/
+ u32 ddr_wrlvl_cntl; /* write leveling control*/
+ u32 resv10[1];
+ u32 ddr_sr_cntr; /* self refresvh counter */
+ u32 ddr_sdram_rcw_1; /* Control Words 1 */
+ u32 ddr_sdram_rcw_2; /* Control Words 2 */
+ u32 resv11[2];
+ u32 ddr_wrlvl_cntl_2; /* write leveling control 2 */
+ u32 ddr_wrlvl_cntl_3; /* write leveling control 3 */
+ u32 resv12[2];
+ u32 ddr_sdram_rcw_3; /* Control Words 3 */
+ u32 ddr_sdram_rcw_4; /* Control Words 4 */
+ u32 ddr_sdram_rcw_5; /* Control Words 5 */
+ u32 ddr_sdram_rcw_6; /* Control Words 6 */
+ u32 resv13[20];
+ u32 sdram_mode_3; /* SDRAM Mode Configuration 3 */
+ u32 sdram_mode_4; /* SDRAM Mode Configuration 4 */
+ u32 sdram_mode_5; /* SDRAM Mode Configuration 5 */
+ u32 sdram_mode_6; /* SDRAM Mode Configuration 6 */
+ u32 sdram_mode_7; /* SDRAM Mode Configuration 7 */
+ u32 sdram_mode_8; /* SDRAM Mode Configuration 8 */
+ u32 sdram_mode_9; /* SDRAM Mode Configuration 9 */
+ u32 sdram_mode_10; /* SDRAM Mode Configuration 10 */
+ u32 sdram_mode_11; /* SDRAM Mode Configuration 11 */
+ u32 sdram_mode_12; /* SDRAM Mode Configuration 12 */
+ u32 sdram_mode_13; /* SDRAM Mode Configuration 13 */
+ u32 sdram_mode_14; /* SDRAM Mode Configuration 14 */
+ u32 sdram_mode_15; /* SDRAM Mode Configuration 15 */
+ u32 sdram_mode_16; /* SDRAM Mode Configuration 16 */
+ u32 resv14[4];
+ u32 timing_cfg_8; /* SDRAM Timing Configuration 8 */
+ u32 timing_cfg_9; /* SDRAM Timing Configuration 9 */
+ u32 resv15[2];
+ u32 sdram_cfg_3; /* SDRAM Control Configuration 3 */
+ u32 resv16[15];
+ u32 deskew_cntl; /* SDRAM Deskew Control */
+ u32 resv17[545];
+ u32 ddr_dsr1; /* Debug Status 1 */
+ u32 ddr_dsr2; /* Debug Status 2 */
+ u32 ddr_cdr1; /* Control Driver 1 */
+ u32 ddr_cdr2; /* Control Driver 2 */
+ u32 resv18[50];
+ u32 ip_rev1; /* IP Block Revision 1 */
+ u32 ip_rev2; /* IP Block Revision 2 */
+ u32 eor; /* Enhanced Optimization Register */
+ u32 resv19[63];
+ u32 mtcr; /* Memory Test Control Register */
+ u32 resv20[7];
+ u32 mtp1; /* Memory Test Pattern 1 */
+ u32 mtp2; /* Memory Test Pattern 2 */
+ u32 mtp3; /* Memory Test Pattern 3 */
+ u32 mtp4; /* Memory Test Pattern 4 */
+ u32 mtp5; /* Memory Test Pattern 5 */
+ u32 mtp6; /* Memory Test Pattern 6 */
+ u32 mtp7; /* Memory Test Pattern 7 */
+ u32 mtp8; /* Memory Test Pattern 8 */
+ u32 mtp9; /* Memory Test Pattern 9 */
+ u32 mtp10; /* Memory Test Pattern 10 */
+ u32 resv21[6];
+ u32 ddr_mt_st_ext_addr; /* Memory Test Start Extended Address */
+ u32 ddr_mt_st_addr; /* Memory Test Start Address */
+ u32 ddr_mt_end_ext_addr; /* Memory Test End Extended Address */
+ u32 ddr_mt_end_addr; /* Memory Test End Address */
+ u32 resv22[36];
+ u32 data_err_inject_hi; /* Data Path Err Injection Mask High */
+ u32 data_err_inject_lo; /* Data Path Err Injection Mask Low */
+ u32 ecc_err_inject; /* Data Path Err Injection Mask ECC */
+ u32 resv23[5];
+ u32 capture_data_hi; /* Data Path Read Capture High */
+ u32 capture_data_lo; /* Data Path Read Capture Low */
+ u32 capture_ecc; /* Data Path Read Capture ECC */
+ u32 resv24[5];
+ u32 err_detect; /* Error Detect */
+ u32 err_disable; /* Error Disable */
+ u32 err_int_en;
+ u32 capture_attributes; /* Error Attrs Capture */
+ u32 capture_address; /* Error Addr Capture */
+ u32 capture_ext_address; /* Error Extended Addr Capture */
+ u32 err_sbe; /* Single-Bit ECC Error Management */
+ u32 resv25[105];
+};
+
+#define CCI400_CTRLORD_TERM_BARRIER 0x00000008
+#define CCI400_CTRLORD_EN_BARRIER 0
+
+/* CCI-400 registers */
+struct ccsr_cci400 {
+ u32 ctrl_ord; /* Control Override */
+ u32 spec_ctrl; /* Speculation Control */
+ u32 secure_access; /* Secure Access */
+ u32 status; /* Status */
+ u32 impr_err; /* Imprecise Error */
+ u8 res_14[0x100 - 0x14];
+ u32 pmcr; /* Performance Monitor Control */
+ u8 res_104[0xfd0 - 0x104];
+ u32 pid[8]; /* Peripheral ID */
+ u32 cid[4]; /* Component ID */
+ struct {
+ u32 snoop_ctrl; /* Snoop Control */
+ u32 sha_ord; /* Shareable Override */
+ u8 res_1008[0x1100 - 0x1008];
+ u32 rc_qos_ord; /* read channel QoS Value Override */
+ u32 wc_qos_ord; /* read channel QoS Value Override */
+ u8 res_1108[0x110c - 0x1108];
+ u32 qos_ctrl; /* QoS Control */
+ u32 max_ot; /* Max OT */
+ u8 res_1114[0x1130 - 0x1114];
+ u32 target_lat; /* Target Latency */
+ u32 latency_regu; /* Latency Regulation */
+ u32 qos_range; /* QoS Range */
+ u8 res_113c[0x2000 - 0x113c];
+ } slave[5]; /* Slave Interface */
+ u8 res_6000[0x9004 - 0x6000];
+ u32 cycle_counter; /* Cycle counter */
+ u32 count_ctrl; /* Count Control */
+ u32 overflow_status; /* Overflow Flag Status */
+ u8 res_9010[0xa000 - 0x9010];
+ struct {
+ u32 event_select; /* Event Select */
+ u32 event_count; /* Event Count */
+ u32 counter_ctrl; /* Counter Control */
+ u32 overflow_status; /* Overflow Flag Status */
+ u8 res_a010[0xb000 - 0xa010];
+ } pcounter[4]; /* Performance Counter */
+ u8 res_e004[0x10000 - 0xe004];
+};
+#endif /* __ASM_ARCH_LS102XA_IMMAP_H_ */
diff --git a/arch/arm/include/asm/arch-ls102xa/imx-regs.h b/arch/arm/include/asm/arch-ls102xa/imx-regs.h
new file mode 100644
index 0000000..f9cd75b
--- /dev/null
+++ b/arch/arm/include/asm/arch-ls102xa/imx-regs.h
@@ -0,0 +1,53 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ *
+ */
+
+#ifndef __ASM_ARCH_IMX_REGS_H__
+#define __ASM_ARCH_IMX_REGS_H__
+
+#define I2C_QUIRK_REG /* enable 8-bit driver */
+
+#ifdef CONFIG_LPUART_32B_REG
+struct lpuart_fsl {
+ u32 baud;
+ u32 stat;
+ u32 ctrl;
+ u32 data;
+ u32 match;
+ u32 modir;
+ u32 fifo;
+ u32 water;
+};
+#else
+struct lpuart_fsl {
+ u8 ubdh;
+ u8 ubdl;
+ u8 uc1;
+ u8 uc2;
+ u8 us1;
+ u8 us2;
+ u8 uc3;
+ u8 ud;
+ u8 uma1;
+ u8 uma2;
+ u8 uc4;
+ u8 uc5;
+ u8 ued;
+ u8 umodem;
+ u8 uir;
+ u8 reserved;
+ u8 upfifo;
+ u8 ucfifo;
+ u8 usfifo;
+ u8 utwfifo;
+ u8 utcfifo;
+ u8 urwfifo;
+ u8 urcfifo;
+ u8 rsvd[28];
+};
+#endif
+
+#endif /* __ASM_ARCH_IMX_REGS_H__ */