diff --git a/include/asm-blackfin/blackfin_local.h b/include/asm-blackfin/blackfin_local.h
new file mode 100644
index 0000000..6f0e662
--- /dev/null
+++ b/include/asm-blackfin/blackfin_local.h
@@ -0,0 +1,215 @@
+/*
+ * U-boot - blackfin_local.h
+ *
+ * Copyright (c) 2005-2007 Analog Devices Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#ifndef __BLACKFIN_LOCAL_H__
+#define __BLACKFIN_LOCAL_H__
+
+#define LO(con32) ((con32) & 0xFFFF)
+#define lo(con32) ((con32) & 0xFFFF)
+#define HI(con32) (((con32) >> 16) & 0xFFFF)
+#define hi(con32) (((con32) >> 16) & 0xFFFF)
+
+#define OFFSET_(x) (x & 0x0000FFFF)
+#define MK_BMSK_(x) (1 << x)
+
+/* Ideally this should be USEC not MSEC, but the USEC multiplication
+ * likes to overflow 32bit quantities which is all our assembler
+ * currently supports ;(
+ */
+#define USEC_PER_MSEC 1000
+#define MSEC_PER_SEC 1000
+#define BFIN_SCLK (100000000)
+#define SCLK_TO_MSEC(sclk) ((MSEC_PER_SEC * ((sclk) / USEC_PER_MSEC)) / (BFIN_SCLK / USEC_PER_MSEC))
+#define MSEC_TO_SCLK(msec) ((((BFIN_SCLK / USEC_PER_MSEC) * (msec)) / MSEC_PER_SEC) * USEC_PER_MSEC)
+
+#include <asm/linkage.h>
+
+#ifndef __ASSEMBLY__
+# ifdef SHARED_RESOURCES
+#  include <asm/shared_resources.h>
+# endif
+
+# include <linux/types.h>
+
+extern u_long get_sclk(void);
+
+# define bfin_revid() (*pCHIPID >> 28)
+
+extern void blackfin_icache_flush_range(const void *, const void *);
+extern void blackfin_dcache_flush_range(const void *, const void *);
+extern void blackfin_dcache_invalidate_range(const void *, const void *);
+
+/* Use DMA to move data from on chip to external memory.  While this is
+ * required for only L1 instruction (it is not directly readable by the
+ * core via data loads), it isn't a huge performance issue for other
+ * regions (it's probably even faster than core load/stores).  However,
+ * the DMA engine does not have access to the L1 scratchpad, and we
+ * cannot use DMA inside of the MMR space.
+ */
+# define addr_bfin_on_chip_mem(addr) \
+	(((unsigned long)(addr) >= 0xef000000 && (unsigned long)addr < SYSMMR_BASE) && \
+	 !((unsigned long)(addr) >= L1_SRAM_SCRATCH && \
+	   (unsigned long)(addr) < L1_SRAM_SCRATCH_END))
+
+# include <asm/system.h>
+
+#if ANOMALY_05000198
+# define NOP_PAD_ANOMALY_05000198 "nop;"
+#else
+# define NOP_PAD_ANOMALY_05000198
+#endif
+
+#define bfin_read8(addr) ({ \
+	uint8_t __v; \
+	__asm__ __volatile__( \
+		NOP_PAD_ANOMALY_05000198 \
+		"%0 = b[%1] (z);" \
+		: "=d" (__v) \
+		: "a" (addr) \
+	); \
+	__v; })
+
+#define bfin_read16(addr) ({ \
+	uint16_t __v; \
+	__asm__ __volatile__( \
+		NOP_PAD_ANOMALY_05000198 \
+		"%0 = w[%1] (z);" \
+		: "=d" (__v) \
+		: "a" (addr) \
+	); \
+	__v; })
+
+#define bfin_read32(addr) ({ \
+	uint32_t __v; \
+	__asm__ __volatile__( \
+		NOP_PAD_ANOMALY_05000198 \
+		"%0 = [%1];" \
+		: "=d" (__v) \
+		: "a" (addr) \
+	); \
+	__v; })
+
+#define bfin_readPTR(addr) bfin_read32(addr)
+
+#define bfin_write8(addr, val) \
+	__asm__ __volatile__( \
+		NOP_PAD_ANOMALY_05000198 \
+		"b[%0] = %1;" \
+		: \
+		: "a" (addr), "d" (val) \
+		: "memory" \
+	)
+
+#define bfin_write16(addr, val) \
+	__asm__ __volatile__( \
+		NOP_PAD_ANOMALY_05000198 \
+		"w[%0] = %1;" \
+		: \
+		: "a" (addr), "d" (val) \
+		: "memory" \
+	)
+
+#define bfin_write32(addr, val) \
+	__asm__ __volatile__( \
+		NOP_PAD_ANOMALY_05000198 \
+		"[%0] = %1;" \
+		: \
+		: "a" (addr), "d" (val) \
+		: "memory" \
+	)
+
+#define bfin_writePTR(addr, val) bfin_write32(addr, val)
+
+/* SSYNC implementation for C file */
+static inline void SSYNC(void)
+{
+	int _tmp;
+	if (ANOMALY_05000312)
+		__asm__ __volatile__(
+			"cli %0;"
+			"nop;"
+			"nop;"
+			"ssync;"
+			"sti %0;"
+			: "=d" (_tmp)
+		);
+	else if (ANOMALY_05000244)
+		__asm__ __volatile__(
+			"nop;"
+			"nop;"
+			"nop;"
+			"ssync;"
+		);
+	else
+		__asm__ __volatile__("ssync;");
+}
+
+/* CSYNC implementation for C file */
+static inline void CSYNC(void)
+{
+	int _tmp;
+	if (ANOMALY_05000312)
+		__asm__ __volatile__(
+			"cli %0;"
+			"nop;"
+			"nop;"
+			"csync;"
+			"sti %0;"
+			: "=d" (_tmp)
+		);
+	else if (ANOMALY_05000244)
+		__asm__ __volatile__(
+			"nop;"
+			"nop;"
+			"nop;"
+			"csync;"
+		);
+	else
+		__asm__ __volatile__("csync;");
+}
+
+#else  /* __ASSEMBLY__ */
+
+/* SSYNC & CSYNC implementations for assembly files */
+
+#define ssync(x) SSYNC(x)
+#define csync(x) CSYNC(x)
+
+#if ANOMALY_05000312
+#define SSYNC(scratch) cli scratch; nop; nop; SSYNC; sti scratch;
+#define CSYNC(scratch) cli scratch; nop; nop; CSYNC; sti scratch;
+
+#elif ANOMALY_05000244
+#define SSYNC(scratch) nop; nop; nop; SSYNC;
+#define CSYNC(scratch) nop; nop; nop; CSYNC;
+
+#else
+#define SSYNC(scratch) SSYNC;
+#define CSYNC(scratch) CSYNC;
+
+#endif /* ANOMALY_05000312 & ANOMALY_05000244 handling */
+
+#endif /* __ASSEMBLY__ */
+
+#endif