spi: Extend the core to ease integration of SPI memory controllers
Some controllers are exposing high-level interfaces to access various
kind of SPI memories. Unfortunately they do not fit in the current
spi_controller model and usually have drivers placed in
drivers/mtd/spi-nor which are only supporting SPI NORs and not SPI
memories in general.
This is an attempt at defining a SPI memory interface which works for
all kinds of SPI memories (NORs, NANDs, SRAMs).
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Jagan Teki <jagan@openedev.com>
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index dcd719f..9fbd267 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -18,6 +18,13 @@
if DM_SPI
+config SPI_MEM
+ bool "SPI memory extension"
+ help
+ Enable this option if you want to enable the SPI memory extension.
+ This extension is meant to simplify interaction with SPI memories
+ by providing an high-level interface to send memory-like commands.
+
config ALTERA_SPI
bool "Altera SPI driver"
help
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index 728e30c..bdb5b5a 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -8,6 +8,7 @@
obj-y += spi-uclass.o
obj-$(CONFIG_SANDBOX) += spi-emul-uclass.o
obj-$(CONFIG_SOFT_SPI) += soft_spi.o
+obj-$(CONFIG_SPI_MEM) += spi-mem.o
else
obj-y += spi.o
obj-$(CONFIG_SOFT_SPI) += soft_spi_legacy.o
diff --git a/drivers/spi/spi-mem.c b/drivers/spi/spi-mem.c
new file mode 100644
index 0000000..af9aef0
--- /dev/null
+++ b/drivers/spi/spi-mem.c
@@ -0,0 +1,501 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Exceet Electronics GmbH
+ * Copyright (C) 2018 Bootlin
+ *
+ * Author: Boris Brezillon <boris.brezillon@bootlin.com>
+ */
+
+#ifndef __UBOOT__
+#include <linux/dmaengine.h>
+#include <linux/pm_runtime.h>
+#include "internals.h"
+#else
+#include <spi.h>
+#include <spi-mem.h>
+#endif
+
+#ifndef __UBOOT__
+/**
+ * spi_controller_dma_map_mem_op_data() - DMA-map the buffer attached to a
+ * memory operation
+ * @ctlr: the SPI controller requesting this dma_map()
+ * @op: the memory operation containing the buffer to map
+ * @sgt: a pointer to a non-initialized sg_table that will be filled by this
+ * function
+ *
+ * Some controllers might want to do DMA on the data buffer embedded in @op.
+ * This helper prepares everything for you and provides a ready-to-use
+ * sg_table. This function is not intended to be called from spi drivers.
+ * Only SPI controller drivers should use it.
+ * Note that the caller must ensure the memory region pointed by
+ * op->data.buf.{in,out} is DMA-able before calling this function.
+ *
+ * Return: 0 in case of success, a negative error code otherwise.
+ */
+int spi_controller_dma_map_mem_op_data(struct spi_controller *ctlr,
+ const struct spi_mem_op *op,
+ struct sg_table *sgt)
+{
+ struct device *dmadev;
+
+ if (!op->data.nbytes)
+ return -EINVAL;
+
+ if (op->data.dir == SPI_MEM_DATA_OUT && ctlr->dma_tx)
+ dmadev = ctlr->dma_tx->device->dev;
+ else if (op->data.dir == SPI_MEM_DATA_IN && ctlr->dma_rx)
+ dmadev = ctlr->dma_rx->device->dev;
+ else
+ dmadev = ctlr->dev.parent;
+
+ if (!dmadev)
+ return -EINVAL;
+
+ return spi_map_buf(ctlr, dmadev, sgt, op->data.buf.in, op->data.nbytes,
+ op->data.dir == SPI_MEM_DATA_IN ?
+ DMA_FROM_DEVICE : DMA_TO_DEVICE);
+}
+EXPORT_SYMBOL_GPL(spi_controller_dma_map_mem_op_data);
+
+/**
+ * spi_controller_dma_unmap_mem_op_data() - DMA-unmap the buffer attached to a
+ * memory operation
+ * @ctlr: the SPI controller requesting this dma_unmap()
+ * @op: the memory operation containing the buffer to unmap
+ * @sgt: a pointer to an sg_table previously initialized by
+ * spi_controller_dma_map_mem_op_data()
+ *
+ * Some controllers might want to do DMA on the data buffer embedded in @op.
+ * This helper prepares things so that the CPU can access the
+ * op->data.buf.{in,out} buffer again.
+ *
+ * This function is not intended to be called from SPI drivers. Only SPI
+ * controller drivers should use it.
+ *
+ * This function should be called after the DMA operation has finished and is
+ * only valid if the previous spi_controller_dma_map_mem_op_data() call
+ * returned 0.
+ *
+ * Return: 0 in case of success, a negative error code otherwise.
+ */
+void spi_controller_dma_unmap_mem_op_data(struct spi_controller *ctlr,
+ const struct spi_mem_op *op,
+ struct sg_table *sgt)
+{
+ struct device *dmadev;
+
+ if (!op->data.nbytes)
+ return;
+
+ if (op->data.dir == SPI_MEM_DATA_OUT && ctlr->dma_tx)
+ dmadev = ctlr->dma_tx->device->dev;
+ else if (op->data.dir == SPI_MEM_DATA_IN && ctlr->dma_rx)
+ dmadev = ctlr->dma_rx->device->dev;
+ else
+ dmadev = ctlr->dev.parent;
+
+ spi_unmap_buf(ctlr, dmadev, sgt,
+ op->data.dir == SPI_MEM_DATA_IN ?
+ DMA_FROM_DEVICE : DMA_TO_DEVICE);
+}
+EXPORT_SYMBOL_GPL(spi_controller_dma_unmap_mem_op_data);
+#endif /* __UBOOT__ */
+
+static int spi_check_buswidth_req(struct spi_slave *slave, u8 buswidth, bool tx)
+{
+ u32 mode = slave->mode;
+
+ switch (buswidth) {
+ case 1:
+ return 0;
+
+ case 2:
+ if ((tx && (mode & (SPI_TX_DUAL | SPI_TX_QUAD))) ||
+ (!tx && (mode & (SPI_RX_DUAL | SPI_RX_QUAD))))
+ return 0;
+
+ break;
+
+ case 4:
+ if ((tx && (mode & SPI_TX_QUAD)) ||
+ (!tx && (mode & SPI_RX_QUAD)))
+ return 0;
+
+ break;
+
+ default:
+ break;
+ }
+
+ return -ENOTSUPP;
+}
+
+bool spi_mem_default_supports_op(struct spi_slave *slave,
+ const struct spi_mem_op *op)
+{
+ if (spi_check_buswidth_req(slave, op->cmd.buswidth, true))
+ return false;
+
+ if (op->addr.nbytes &&
+ spi_check_buswidth_req(slave, op->addr.buswidth, true))
+ return false;
+
+ if (op->dummy.nbytes &&
+ spi_check_buswidth_req(slave, op->dummy.buswidth, true))
+ return false;
+
+ if (op->data.nbytes &&
+ spi_check_buswidth_req(slave, op->data.buswidth,
+ op->data.dir == SPI_MEM_DATA_OUT))
+ return false;
+
+ return true;
+}
+EXPORT_SYMBOL_GPL(spi_mem_default_supports_op);
+
+/**
+ * spi_mem_supports_op() - Check if a memory device and the controller it is
+ * connected to support a specific memory operation
+ * @slave: the SPI device
+ * @op: the memory operation to check
+ *
+ * Some controllers are only supporting Single or Dual IOs, others might only
+ * support specific opcodes, or it can even be that the controller and device
+ * both support Quad IOs but the hardware prevents you from using it because
+ * only 2 IO lines are connected.
+ *
+ * This function checks whether a specific operation is supported.
+ *
+ * Return: true if @op is supported, false otherwise.
+ */
+bool spi_mem_supports_op(struct spi_slave *slave,
+ const struct spi_mem_op *op)
+{
+ struct udevice *bus = slave->dev->parent;
+ struct dm_spi_ops *ops = spi_get_ops(bus);
+
+ if (ops->mem_ops && ops->mem_ops->supports_op)
+ return ops->mem_ops->supports_op(slave, op);
+
+ return spi_mem_default_supports_op(slave, op);
+}
+EXPORT_SYMBOL_GPL(spi_mem_supports_op);
+
+/**
+ * spi_mem_exec_op() - Execute a memory operation
+ * @slave: the SPI device
+ * @op: the memory operation to execute
+ *
+ * Executes a memory operation.
+ *
+ * This function first checks that @op is supported and then tries to execute
+ * it.
+ *
+ * Return: 0 in case of success, a negative error code otherwise.
+ */
+int spi_mem_exec_op(struct spi_slave *slave, const struct spi_mem_op *op)
+{
+ struct udevice *bus = slave->dev->parent;
+ struct dm_spi_ops *ops = spi_get_ops(bus);
+ unsigned int pos = 0;
+ const u8 *tx_buf = NULL;
+ u8 *rx_buf = NULL;
+ u8 *op_buf;
+ int op_len;
+ u32 flag;
+ int ret;
+ int i;
+
+ if (!spi_mem_supports_op(slave, op))
+ return -ENOTSUPP;
+
+ if (ops->mem_ops) {
+#ifndef __UBOOT__
+ /*
+ * Flush the message queue before executing our SPI memory
+ * operation to prevent preemption of regular SPI transfers.
+ */
+ spi_flush_queue(ctlr);
+
+ if (ctlr->auto_runtime_pm) {
+ ret = pm_runtime_get_sync(ctlr->dev.parent);
+ if (ret < 0) {
+ dev_err(&ctlr->dev,
+ "Failed to power device: %d\n",
+ ret);
+ return ret;
+ }
+ }
+
+ mutex_lock(&ctlr->bus_lock_mutex);
+ mutex_lock(&ctlr->io_mutex);
+#endif
+ ret = ops->mem_ops->exec_op(slave, op);
+#ifndef __UBOOT__
+ mutex_unlock(&ctlr->io_mutex);
+ mutex_unlock(&ctlr->bus_lock_mutex);
+
+ if (ctlr->auto_runtime_pm)
+ pm_runtime_put(ctlr->dev.parent);
+#endif
+
+ /*
+ * Some controllers only optimize specific paths (typically the
+ * read path) and expect the core to use the regular SPI
+ * interface in other cases.
+ */
+ if (!ret || ret != -ENOTSUPP)
+ return ret;
+ }
+
+#ifndef __UBOOT__
+ tmpbufsize = sizeof(op->cmd.opcode) + op->addr.nbytes +
+ op->dummy.nbytes;
+
+ /*
+ * Allocate a buffer to transmit the CMD, ADDR cycles with kmalloc() so
+ * we're guaranteed that this buffer is DMA-able, as required by the
+ * SPI layer.
+ */
+ tmpbuf = kzalloc(tmpbufsize, GFP_KERNEL | GFP_DMA);
+ if (!tmpbuf)
+ return -ENOMEM;
+
+ spi_message_init(&msg);
+
+ tmpbuf[0] = op->cmd.opcode;
+ xfers[xferpos].tx_buf = tmpbuf;
+ xfers[xferpos].len = sizeof(op->cmd.opcode);
+ xfers[xferpos].tx_nbits = op->cmd.buswidth;
+ spi_message_add_tail(&xfers[xferpos], &msg);
+ xferpos++;
+ totalxferlen++;
+
+ if (op->addr.nbytes) {
+ int i;
+
+ for (i = 0; i < op->addr.nbytes; i++)
+ tmpbuf[i + 1] = op->addr.val >>
+ (8 * (op->addr.nbytes - i - 1));
+
+ xfers[xferpos].tx_buf = tmpbuf + 1;
+ xfers[xferpos].len = op->addr.nbytes;
+ xfers[xferpos].tx_nbits = op->addr.buswidth;
+ spi_message_add_tail(&xfers[xferpos], &msg);
+ xferpos++;
+ totalxferlen += op->addr.nbytes;
+ }
+
+ if (op->dummy.nbytes) {
+ memset(tmpbuf + op->addr.nbytes + 1, 0xff, op->dummy.nbytes);
+ xfers[xferpos].tx_buf = tmpbuf + op->addr.nbytes + 1;
+ xfers[xferpos].len = op->dummy.nbytes;
+ xfers[xferpos].tx_nbits = op->dummy.buswidth;
+ spi_message_add_tail(&xfers[xferpos], &msg);
+ xferpos++;
+ totalxferlen += op->dummy.nbytes;
+ }
+
+ if (op->data.nbytes) {
+ if (op->data.dir == SPI_MEM_DATA_IN) {
+ xfers[xferpos].rx_buf = op->data.buf.in;
+ xfers[xferpos].rx_nbits = op->data.buswidth;
+ } else {
+ xfers[xferpos].tx_buf = op->data.buf.out;
+ xfers[xferpos].tx_nbits = op->data.buswidth;
+ }
+
+ xfers[xferpos].len = op->data.nbytes;
+ spi_message_add_tail(&xfers[xferpos], &msg);
+ xferpos++;
+ totalxferlen += op->data.nbytes;
+ }
+
+ ret = spi_sync(slave, &msg);
+
+ kfree(tmpbuf);
+
+ if (ret)
+ return ret;
+
+ if (msg.actual_length != totalxferlen)
+ return -EIO;
+#else
+
+ /* U-Boot does not support parallel SPI data lanes */
+ if ((op->cmd.buswidth != 1) ||
+ (op->addr.nbytes && op->addr.buswidth != 1) ||
+ (op->dummy.nbytes && op->dummy.buswidth != 1) ||
+ (op->data.nbytes && op->data.buswidth != 1)) {
+ printf("Dual/Quad raw SPI transfers not supported\n");
+ return -ENOTSUPP;
+ }
+
+ if (op->data.nbytes) {
+ if (op->data.dir == SPI_MEM_DATA_IN)
+ rx_buf = op->data.buf.in;
+ else
+ tx_buf = op->data.buf.out;
+ }
+
+ op_len = sizeof(op->cmd.opcode) + op->addr.nbytes + op->dummy.nbytes;
+ op_buf = calloc(1, op_len);
+
+ ret = spi_claim_bus(slave);
+ if (ret < 0)
+ return ret;
+
+ op_buf[pos++] = op->cmd.opcode;
+
+ if (op->addr.nbytes) {
+ for (i = 0; i < op->addr.nbytes; i++)
+ op_buf[pos + i] = op->addr.val >>
+ (8 * (op->addr.nbytes - i - 1));
+
+ pos += op->addr.nbytes;
+ }
+
+ if (op->dummy.nbytes)
+ memset(op_buf + pos, 0xff, op->dummy.nbytes);
+
+ /* 1st transfer: opcode + address + dummy cycles */
+ flag = SPI_XFER_BEGIN;
+ /* Make sure to set END bit if no tx or rx data messages follow */
+ if (!tx_buf && !rx_buf)
+ flag |= SPI_XFER_END;
+
+ ret = spi_xfer(slave, op_len * 8, op_buf, NULL, flag);
+ if (ret)
+ return ret;
+
+ /* 2nd transfer: rx or tx data path */
+ if (tx_buf || rx_buf) {
+ ret = spi_xfer(slave, op->data.nbytes * 8, tx_buf,
+ rx_buf, SPI_XFER_END);
+ if (ret)
+ return ret;
+ }
+
+ spi_release_bus(slave);
+
+ for (i = 0; i < pos; i++)
+ debug("%02x ", op_buf[i]);
+ debug("| [%dB %s] ",
+ tx_buf || rx_buf ? op->data.nbytes : 0,
+ tx_buf || rx_buf ? (tx_buf ? "out" : "in") : "-");
+ for (i = 0; i < op->data.nbytes; i++)
+ debug("%02x ", tx_buf ? tx_buf[i] : rx_buf[i]);
+ debug("[ret %d]\n", ret);
+
+ free(op_buf);
+
+ if (ret < 0)
+ return ret;
+#endif /* __UBOOT__ */
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(spi_mem_exec_op);
+
+/**
+ * spi_mem_adjust_op_size() - Adjust the data size of a SPI mem operation to
+ * match controller limitations
+ * @slave: the SPI device
+ * @op: the operation to adjust
+ *
+ * Some controllers have FIFO limitations and must split a data transfer
+ * operation into multiple ones, others require a specific alignment for
+ * optimized accesses. This function allows SPI mem drivers to split a single
+ * operation into multiple sub-operations when required.
+ *
+ * Return: a negative error code if the controller can't properly adjust @op,
+ * 0 otherwise. Note that @op->data.nbytes will be updated if @op
+ * can't be handled in a single step.
+ */
+int spi_mem_adjust_op_size(struct spi_slave *slave, struct spi_mem_op *op)
+{
+ struct udevice *bus = slave->dev->parent;
+ struct dm_spi_ops *ops = spi_get_ops(bus);
+
+ if (ops->mem_ops && ops->mem_ops->adjust_op_size)
+ return ops->mem_ops->adjust_op_size(slave, op);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(spi_mem_adjust_op_size);
+
+#ifndef __UBOOT__
+static inline struct spi_mem_driver *to_spi_mem_drv(struct device_driver *drv)
+{
+ return container_of(drv, struct spi_mem_driver, spidrv.driver);
+}
+
+static int spi_mem_probe(struct spi_device *spi)
+{
+ struct spi_mem_driver *memdrv = to_spi_mem_drv(spi->dev.driver);
+ struct spi_mem *mem;
+
+ mem = devm_kzalloc(&spi->dev, sizeof(*mem), GFP_KERNEL);
+ if (!mem)
+ return -ENOMEM;
+
+ mem->spi = spi;
+ spi_set_drvdata(spi, mem);
+
+ return memdrv->probe(mem);
+}
+
+static int spi_mem_remove(struct spi_device *spi)
+{
+ struct spi_mem_driver *memdrv = to_spi_mem_drv(spi->dev.driver);
+ struct spi_mem *mem = spi_get_drvdata(spi);
+
+ if (memdrv->remove)
+ return memdrv->remove(mem);
+
+ return 0;
+}
+
+static void spi_mem_shutdown(struct spi_device *spi)
+{
+ struct spi_mem_driver *memdrv = to_spi_mem_drv(spi->dev.driver);
+ struct spi_mem *mem = spi_get_drvdata(spi);
+
+ if (memdrv->shutdown)
+ memdrv->shutdown(mem);
+}
+
+/**
+ * spi_mem_driver_register_with_owner() - Register a SPI memory driver
+ * @memdrv: the SPI memory driver to register
+ * @owner: the owner of this driver
+ *
+ * Registers a SPI memory driver.
+ *
+ * Return: 0 in case of success, a negative error core otherwise.
+ */
+
+int spi_mem_driver_register_with_owner(struct spi_mem_driver *memdrv,
+ struct module *owner)
+{
+ memdrv->spidrv.probe = spi_mem_probe;
+ memdrv->spidrv.remove = spi_mem_remove;
+ memdrv->spidrv.shutdown = spi_mem_shutdown;
+
+ return __spi_register_driver(owner, &memdrv->spidrv);
+}
+EXPORT_SYMBOL_GPL(spi_mem_driver_register_with_owner);
+
+/**
+ * spi_mem_driver_unregister_with_owner() - Unregister a SPI memory driver
+ * @memdrv: the SPI memory driver to unregister
+ *
+ * Unregisters a SPI memory driver.
+ */
+void spi_mem_driver_unregister(struct spi_mem_driver *memdrv)
+{
+ spi_unregister_driver(&memdrv->spidrv);
+}
+EXPORT_SYMBOL_GPL(spi_mem_driver_unregister);
+#endif /* __UBOOT__ */