w1: add command for onewire protocol

Add basic command for bus information and read for onewire
bus using Dallas 1-Wire protocol.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
diff --git a/cmd/w1.c b/cmd/w1.c
new file mode 100644
index 0000000..9c95fcf
--- /dev/null
+++ b/cmd/w1.c
@@ -0,0 +1,126 @@
+/* SPDX-License-Identifier: GPL-2.0+
+ *
+ * (C) Copyright 2018
+ * Microchip Technology, Inc.
+ * Eugen Hristev <eugen.hristev@microchip.com>
+ */
+#include <common.h>
+#include <command.h>
+#include <w1.h>
+#include <w1-eeprom.h>
+#include <dm/device-internal.h>
+
+static int w1_bus(void)
+{
+	struct udevice *bus, *dev;
+	int ret;
+
+	ret = w1_get_bus(0, &bus);
+	if (ret) {
+		printf("one wire interface not found\n");
+		return CMD_RET_FAILURE;
+	}
+	printf("Bus %d:\t%s", bus->seq, bus->name);
+	if (device_active(bus))
+		printf("  (active)");
+	printf("\n");
+
+	for (device_find_first_child(bus, &dev);
+	     dev;
+	     device_find_next_child(&dev)) {
+		ret = device_probe(dev);
+
+		printf("\t%s (%d) uclass %s : ", dev->name, dev->seq,
+		       dev->uclass->uc_drv->name);
+
+		if (ret)
+			printf("device error\n");
+		else
+			printf("family 0x%x\n", w1_get_device_family(dev));
+	}
+	return CMD_RET_SUCCESS;
+}
+
+static int w1_read(int argc, char *const argv[])
+{
+	int bus_n = 0, dev_n = 0, offset = 0, len = 512;
+	int i;
+	struct udevice *bus, *dev;
+	int ret;
+	u8 buf[512];
+
+	if (argc > 2)
+		bus_n = simple_strtoul(argv[2], NULL, 10);
+
+	if (argc > 3)
+		dev_n = simple_strtoul(argv[3], NULL, 10);
+
+	if (argc > 4)
+		offset = simple_strtoul(argv[4], NULL, 10);
+
+	if (argc > 5)
+		len = simple_strtoul(argv[5], NULL, 10);
+
+	if (len > 512) {
+		printf("len needs to be <= 512\n");
+		return CMD_RET_FAILURE;
+	}
+
+	ret = w1_get_bus(bus_n, &bus);
+	if (ret) {
+		printf("one wire interface not found\n");
+		return CMD_RET_FAILURE;
+	}
+
+	for (device_find_first_child(bus, &dev), i = 0;
+	   dev && i <= dev_n;
+	   device_find_next_child(&dev), i++) {
+		ret = device_probe(dev);
+		if (!ret && i == dev_n)
+			break;
+	}
+
+	if (i != dev_n || ret || !dev) {
+		printf("invalid dev\n");
+		return CMD_RET_FAILURE;
+	}
+
+	if (strcmp(dev->uclass->uc_drv->name, "w1_eeprom")) {
+		printf("the device present on the interface is of unknown device class\n");
+		return CMD_RET_FAILURE;
+	}
+
+	ret = w1_eeprom_read_buf(dev, offset, (u8 *)buf, len);
+	if (ret) {
+		printf("error reading device %s\n", dev->name);
+		return CMD_RET_FAILURE;
+	}
+
+	for (i = 0; i < len; i++)
+		printf("%x", buf[i]);
+	printf("\n");
+
+	return CMD_RET_SUCCESS;
+}
+
+int do_w1(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
+{
+	if (argc < 2)
+		return CMD_RET_USAGE;
+
+	if (!strcmp(argv[1], "bus"))
+		return w1_bus();
+
+	if (!strcmp(argv[1], "read"))
+		return w1_read(argc, argv);
+
+	return CMD_RET_SUCCESS;
+}
+
+U_BOOT_CMD(w1, 6, 0, do_w1,
+	   "onewire interface utility commands",
+	   "bus - show onewire bus info (all)\n"
+	   "w1 read [<bus> [<dev> [offset [length]]]]"
+	   "    - read from onewire device 'dev' on onewire bus 'bus'"
+	   " starting from offset 'offset' and length 'length'\n"
+	   "      defaults: bus 0, dev 0, offset 0, length 512 bytes.");