bcm283x: Add pinctrl driver

The bcm283x family of SoCs have a GPIO controller that also acts as
pinctrl controller.

This patch introduces a new pinctrl driver that can actually properly mux
devices into their device tree defined pin states and is now the primary
owner of the gpio device. The previous GPIO driver gets moved into a
subdevice of the pinctrl driver, bound to the same OF node.

That way whenever a device asks for pinctrl support, it gets it
automatically from the pinctrl driver and GPIO support is still available
in the normal command line phase.

Signed-off-by: Alexander Graf <agraf@suse.de>
diff --git a/MAINTAINERS b/MAINTAINERS
index d459153..aa161c8 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -100,6 +100,7 @@
 F:	drivers/serial/serial_bcm283x_mu.c
 F:	drivers/video/bcm2835.c
 F:	include/dm/platform_data/serial_bcm283x_mu.h
+F:	drivers/pinctrl/broadcom/
 
 ARM FREESCALE IMX
 M:	Stefano Babic <sbabic@denx.de>
diff --git a/arch/arm/mach-bcm283x/include/mach/gpio.h b/arch/arm/mach-bcm283x/include/mach/gpio.h
index daaee52..7b4ddc9 100644
--- a/arch/arm/mach-bcm283x/include/mach/gpio.h
+++ b/arch/arm/mach-bcm283x/include/mach/gpio.h
@@ -61,6 +61,4 @@
 	unsigned long base;
 };
 
-int bcm2835_gpio_get_func_id(struct udevice *dev, unsigned gpio);
-
 #endif /* _BCM2835_GPIO_H_ */
diff --git a/board/raspberrypi/rpi/rpi.c b/board/raspberrypi/rpi/rpi.c
index 3b7a54f..c8924d4 100644
--- a/board/raspberrypi/rpi/rpi.c
+++ b/board/raspberrypi/rpi/rpi.c
@@ -24,6 +24,7 @@
 #include <asm/armv8/mmu.h>
 #endif
 #include <watchdog.h>
+#include <dm/pinctrl.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -430,10 +431,10 @@
 	 * out whether it is available is to check if the RX pin is muxed.
 	 */
 
-	if (uclass_first_device(UCLASS_GPIO, &dev) || !dev)
+	if (uclass_first_device(UCLASS_PINCTRL, &dev) || !dev)
 		return true;
 
-	if (bcm2835_gpio_get_func_id(dev, serial_gpio) != BCM2835_GPIO_ALT5)
+	if (pinctrl_get_gpio_mux(dev, 0, serial_gpio) != BCM2835_GPIO_ALT5)
 		return false;
 
 	return true;
diff --git a/configs/rpi_0_w_defconfig b/configs/rpi_0_w_defconfig
index 1248294..8ed7a58 100644
--- a/configs/rpi_0_w_defconfig
+++ b/configs/rpi_0_w_defconfig
@@ -32,3 +32,7 @@
 CONFIG_CONSOLE_SCROLL_LINES=10
 CONFIG_PHYS_TO_BUS=y
 CONFIG_OF_LIBFDT_OVERLAY=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_FULL=y
+# CONFIG_PINCTRL_GENERIC is not set
+CONFIG_PINCTRL_BCM283X=y
diff --git a/configs/rpi_2_defconfig b/configs/rpi_2_defconfig
index c45ffb6..b30e6e1 100644
--- a/configs/rpi_2_defconfig
+++ b/configs/rpi_2_defconfig
@@ -32,3 +32,7 @@
 CONFIG_CONSOLE_SCROLL_LINES=10
 CONFIG_PHYS_TO_BUS=y
 CONFIG_OF_LIBFDT_OVERLAY=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_FULL=y
+# CONFIG_PINCTRL_GENERIC is not set
+CONFIG_PINCTRL_BCM283X=y
diff --git a/configs/rpi_3_32b_defconfig b/configs/rpi_3_32b_defconfig
index f7aed35..bb40644 100644
--- a/configs/rpi_3_32b_defconfig
+++ b/configs/rpi_3_32b_defconfig
@@ -34,3 +34,7 @@
 CONFIG_CONSOLE_SCROLL_LINES=10
 CONFIG_PHYS_TO_BUS=y
 CONFIG_OF_LIBFDT_OVERLAY=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_FULL=y
+# CONFIG_PINCTRL_GENERIC is not set
+CONFIG_PINCTRL_BCM283X=y
diff --git a/configs/rpi_3_defconfig b/configs/rpi_3_defconfig
index 9416e3b..8306bc2 100644
--- a/configs/rpi_3_defconfig
+++ b/configs/rpi_3_defconfig
@@ -34,3 +34,7 @@
 CONFIG_CONSOLE_SCROLL_LINES=10
 CONFIG_PHYS_TO_BUS=y
 CONFIG_OF_LIBFDT_OVERLAY=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_FULL=y
+# CONFIG_PINCTRL_GENERIC is not set
+CONFIG_PINCTRL_BCM283X=y
diff --git a/configs/rpi_defconfig b/configs/rpi_defconfig
index 3bfa745..a7a079d 100644
--- a/configs/rpi_defconfig
+++ b/configs/rpi_defconfig
@@ -32,3 +32,7 @@
 CONFIG_CONSOLE_SCROLL_LINES=10
 CONFIG_PHYS_TO_BUS=y
 CONFIG_OF_LIBFDT_OVERLAY=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_FULL=y
+# CONFIG_PINCTRL_GENERIC is not set
+CONFIG_PINCTRL_BCM283X=y
diff --git a/drivers/gpio/bcm2835_gpio.c b/drivers/gpio/bcm2835_gpio.c
index beaa218..d68f8df 100644
--- a/drivers/gpio/bcm2835_gpio.c
+++ b/drivers/gpio/bcm2835_gpio.c
@@ -7,6 +7,7 @@
 
 #include <common.h>
 #include <dm.h>
+#include <dm/pinctrl.h>
 #include <errno.h>
 #include <asm/gpio.h>
 #include <asm/io.h>
@@ -14,6 +15,7 @@
 
 struct bcm2835_gpios {
 	struct bcm2835_gpio_regs *reg;
+	struct udevice *pinctrl;
 };
 
 static int bcm2835_gpio_direction_input(struct udevice *dev, unsigned gpio)
@@ -29,7 +31,7 @@
 	return 0;
 }
 
-static int bcm2835_gpio_direction_output(struct udevice *dev, unsigned gpio,
+static int bcm2835_gpio_direction_output(struct udevice *dev, unsigned int gpio,
 					 int value)
 {
 	struct bcm2835_gpios *gpios = dev_get_priv(dev);
@@ -73,19 +75,12 @@
 	return 0;
 }
 
-int bcm2835_gpio_get_func_id(struct udevice *dev, unsigned gpio)
-{
-	struct bcm2835_gpios *gpios = dev_get_priv(dev);
-	u32 val;
-
-	val = readl(&gpios->reg->gpfsel[BCM2835_GPIO_FSEL_BANK(gpio)]);
-
-	return (val >> BCM2835_GPIO_FSEL_SHIFT(gpio) & BCM2835_GPIO_FSEL_MASK);
-}
-
 static int bcm2835_gpio_get_function(struct udevice *dev, unsigned offset)
 {
-	int funcid = bcm2835_gpio_get_func_id(dev, offset);
+	struct bcm2835_gpios *priv = dev_get_priv(dev);
+	int funcid;
+
+	funcid = pinctrl_get_gpio_mux(priv->pinctrl, 0, offset);
 
 	switch (funcid) {
 	case BCM2835_GPIO_OUTPUT:
@@ -97,7 +92,6 @@
 	}
 }
 
-
 static const struct dm_gpio_ops gpio_bcm2835_ops = {
 	.direction_input	= bcm2835_gpio_direction_input,
 	.direction_output	= bcm2835_gpio_direction_output,
@@ -116,15 +110,13 @@
 	uc_priv->gpio_count = BCM2835_GPIO_COUNT;
 	gpios->reg = (struct bcm2835_gpio_regs *)plat->base;
 
+	/* We know we're spawned by the pinctrl driver */
+	gpios->pinctrl = dev->parent;
+
 	return 0;
 }
 
 #if CONFIG_IS_ENABLED(OF_CONTROL)
-static const struct udevice_id bcm2835_gpio_id[] = {
-	{.compatible = "brcm,bcm2835-gpio"},
-	{}
-};
-
 static int bcm2835_gpio_ofdata_to_platdata(struct udevice *dev)
 {
 	struct bcm2835_gpio_platdata *plat = dev_get_platdata(dev);
@@ -142,7 +134,6 @@
 U_BOOT_DRIVER(gpio_bcm2835) = {
 	.name	= "gpio_bcm2835",
 	.id	= UCLASS_GPIO,
-	.of_match = of_match_ptr(bcm2835_gpio_id),
 	.ofdata_to_platdata = of_match_ptr(bcm2835_gpio_ofdata_to_platdata),
 	.platdata_auto_alloc_size = sizeof(struct bcm2835_gpio_platdata),
 	.ops	= &gpio_bcm2835_ops,
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index 7e8e4b0..0a4dd3c 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -306,5 +306,6 @@
 source "drivers/pinctrl/uniphier/Kconfig"
 source "drivers/pinctrl/exynos/Kconfig"
 source "drivers/pinctrl/mvebu/Kconfig"
+source "drivers/pinctrl/broadcom/Kconfig"
 
 endmenu
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index 8c04028..c7135d2 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -22,3 +22,4 @@
 obj-$(CONFIG_PINCTRL_SINGLE)	+= pinctrl-single.o
 obj-$(CONFIG_PINCTRL_STI)	+= pinctrl-sti.o
 obj-$(CONFIG_PINCTRL_STM32)	+= pinctrl_stm32.o
+obj-y				+= broadcom/
diff --git a/drivers/pinctrl/broadcom/Kconfig b/drivers/pinctrl/broadcom/Kconfig
new file mode 100644
index 0000000..4056782
--- /dev/null
+++ b/drivers/pinctrl/broadcom/Kconfig
@@ -0,0 +1,7 @@
+config PINCTRL_BCM283X
+	depends on ARCH_BCM283X && PINCTRL_FULL && OF_CONTROL
+	default y
+	bool "Broadcom 283x family pin control driver"
+	help
+	   Support pin multiplexing and pin configuration control on
+	   Broadcom's 283x family of SoCs.
diff --git a/drivers/pinctrl/broadcom/Makefile b/drivers/pinctrl/broadcom/Makefile
new file mode 100644
index 0000000..2a1e550
--- /dev/null
+++ b/drivers/pinctrl/broadcom/Makefile
@@ -0,0 +1,7 @@
+#
+# Copyright (C) 2018 Alexander Graf <agraf@suse.de>
+#
+# SPDX-License-Identifier:	GPL-2.0
+# https://spdx.org/licenses
+
+obj-$(CONFIG_PINCTRL_BCM283X) += pinctrl-bcm283x.o
diff --git a/drivers/pinctrl/broadcom/pinctrl-bcm283x.c b/drivers/pinctrl/broadcom/pinctrl-bcm283x.c
new file mode 100644
index 0000000..83dde23
--- /dev/null
+++ b/drivers/pinctrl/broadcom/pinctrl-bcm283x.c
@@ -0,0 +1,152 @@
+/*
+ * Copyright (C) 2018 Alexander Graf <agraf@suse.de>
+ *
+ * Based on drivers/pinctrl/mvebu/pinctrl-mvebu.c and
+ *          drivers/gpio/bcm2835_gpio.c
+ *
+ * This driver gets instantiated by the GPIO driver, because both devices
+ * share the same device node.
+ *
+ * SPDX-License-Identifier:	GPL-2.0
+ * https://spdx.org/licenses
+ */
+
+#include <common.h>
+#include <config.h>
+#include <errno.h>
+#include <dm.h>
+#include <dm/pinctrl.h>
+#include <dm/root.h>
+#include <dm/device-internal.h>
+#include <dm/lists.h>
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/gpio.h>
+
+struct bcm283x_pinctrl_priv {
+	u32 *base_reg;
+};
+
+#define MAX_PINS_PER_BANK 16
+
+static void bcm2835_gpio_set_func_id(struct udevice *dev, unsigned int gpio,
+				     int func)
+{
+	struct bcm283x_pinctrl_priv *priv = dev_get_priv(dev);
+	int reg_offset;
+	int field_offset;
+
+	reg_offset = BCM2835_GPIO_FSEL_BANK(gpio);
+	field_offset = BCM2835_GPIO_FSEL_SHIFT(gpio);
+
+	clrsetbits_le32(&priv->base_reg[reg_offset],
+			BCM2835_GPIO_FSEL_MASK << field_offset,
+			(func & BCM2835_GPIO_FSEL_MASK) << field_offset);
+}
+
+static int bcm2835_gpio_get_func_id(struct udevice *dev, unsigned int gpio)
+{
+	struct bcm283x_pinctrl_priv *priv = dev_get_priv(dev);
+	u32 val;
+
+	val = readl(&priv->base_reg[BCM2835_GPIO_FSEL_BANK(gpio)]);
+
+	return (val >> BCM2835_GPIO_FSEL_SHIFT(gpio) & BCM2835_GPIO_FSEL_MASK);
+}
+
+/*
+ * bcm283x_pinctrl_set_state: configure pin functions.
+ * @dev: the pinctrl device to be configured.
+ * @config: the state to be configured.
+ * @return: 0 in success
+ */
+int bcm283x_pinctrl_set_state(struct udevice *dev, struct udevice *config)
+{
+	u32 pin_arr[MAX_PINS_PER_BANK];
+	u32 function;
+	int i, len, pin_count = 0;
+
+	if (!dev_read_prop(config, "brcm,pins", &len) || !len ||
+	    len & 0x3 || dev_read_u32_array(config, "brcm,pins", pin_arr,
+						  len / sizeof(u32))) {
+		debug("Failed reading pins array for pinconfig %s (%d)\n",
+		      config->name, len);
+		return -EINVAL;
+	}
+
+	pin_count = len / sizeof(u32);
+
+	function = dev_read_u32_default(config, "brcm,function", -1);
+	if (function < 0) {
+		debug("Failed reading function for pinconfig %s (%d)\n",
+		      config->name, function);
+		return -EINVAL;
+	}
+
+	for (i = 0; i < pin_count; i++)
+		bcm2835_gpio_set_func_id(dev, pin_arr[i], function);
+
+	return 0;
+}
+
+static int bcm283x_pinctrl_get_gpio_mux(struct udevice *dev, int banknum,
+					int index)
+{
+	if (banknum != 0)
+		return -EINVAL;
+
+	return bcm2835_gpio_get_func_id(dev, index);
+}
+
+static const struct udevice_id bcm2835_pinctrl_id[] = {
+	{.compatible = "brcm,bcm2835-gpio"},
+	{}
+};
+
+int bcm283x_pinctl_probe(struct udevice *dev)
+{
+	struct bcm283x_pinctrl_priv *priv;
+	int ret;
+	struct udevice *pdev;
+
+	priv = dev_get_priv(dev);
+	if (!priv) {
+		debug("%s: Failed to get private\n", __func__);
+		return -EINVAL;
+	}
+
+	priv->base_reg = dev_read_addr_ptr(dev);
+	if (priv->base_reg == (void *)FDT_ADDR_T_NONE) {
+		debug("%s: Failed to get base address\n", __func__);
+		return -EINVAL;
+	}
+
+	/* Create GPIO device as well */
+	ret = device_bind(dev, lists_driver_lookup_name("gpio_bcm2835"),
+			  "gpio_bcm2835", NULL, dev_of_offset(dev), &pdev);
+	if (ret) {
+		/*
+		 * While we really want the pinctrl driver to work to make
+		 * devices go where they should go, the GPIO controller is
+		 * not quite as crucial as it's only rarely used, so don't
+		 * fail here.
+		 */
+		printf("Failed to bind GPIO driver\n");
+	}
+
+	return 0;
+}
+
+static struct pinctrl_ops bcm283x_pinctrl_ops = {
+	.set_state	= bcm283x_pinctrl_set_state,
+	.get_gpio_mux	= bcm283x_pinctrl_get_gpio_mux,
+};
+
+U_BOOT_DRIVER(pinctrl_bcm283x) = {
+	.name		= "bcm283x_pinctrl",
+	.id		= UCLASS_PINCTRL,
+	.of_match	= of_match_ptr(bcm2835_pinctrl_id),
+	.priv_auto_alloc_size = sizeof(struct bcm283x_pinctrl_priv),
+	.ops		= &bcm283x_pinctrl_ops,
+	.probe		= bcm283x_pinctl_probe
+};