powerpc/mpc8xxx: Add memory reset control

JEDEC spec requires the clocks to be stable before deasserting reset
signal for RDIMMs. Clocks start when any chip select is enabled and
clock control register is set. This patch also adds the interface to
toggle memory reset signal if needed by the boards.

Signed-off-by: York Sun <yorksun@freescale.com>
diff --git a/board/freescale/p1010rdb/ddr.c b/board/freescale/p1010rdb/ddr.c
index aa8bada..681f052 100644
--- a/board/freescale/p1010rdb/ddr.c
+++ b/board/freescale/p1010rdb/ddr.c
@@ -139,7 +139,7 @@
 	}
 
 	ddr_size = (phys_size_t) CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
-	fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 0);
+	fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 0, 0);
 
 	if (set_ddr_laws(CONFIG_SYS_DDR_SDRAM_BASE, ddr_size,
 					LAW_TRGT_IF_DDR_1) < 0) {