diff --git a/board/eltec/bab7xx/asm_init.S b/board/eltec/bab7xx/asm_init.S
new file mode 100644
index 0000000..d739b81
--- /dev/null
+++ b/board/eltec/bab7xx/asm_init.S
@@ -0,0 +1,1487 @@
+/*
+ * (C) Copyright 2001 ELTEC Elektronik AG
+ * Frank Gottschling <fgottschling@eltec.de>
+ *
+ * ELTEC BAB PPC RAM initialization
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <mpc75x.h>
+#include <mpc106.h>
+#include <version.h>
+
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+
+/*
+ * This following contains the entry code for the initialization code
+ * for the MPC 106, a PCI Bridge/Memory Controller.
+ * Register usage:
+ * r0  = ramtest scratch register, toggleError loop counter
+ * r1  = 0xfec0 0cf8 CONFIG_ADDRESS
+ * r2  = 0xfee0 0cfc CONFIG_DATA
+ * r3  = scratch register, subroutine argument and return value, ramtest size
+ * r4  = scratch register, spdRead clock mask, OutHex loop count
+ * r5  = ramtest scratch register
+ * r6  = toggleError 1st value, spdRead port mask
+ * r7  = toggleError 2nd value, ramtest scratch register,
+ *       spdRead scratch register (0x00)
+ * r8  = ramtest scratch register, spdRead scratch register (0x80)
+ * r9  = ramtest scratch register, toggleError loop end, OutHex digit
+ * r10 = ramtest scratch register, spdWriteByte parameter,
+ *        spdReadByte return value, printf pointer to COM1
+ * r11 = startType
+ * r12 = ramtest scratch register, spdRead data mask
+ * r13 = pointer to message block
+ * r14 = pointer to GOT
+ * r15 = scratch register, SPD save
+ * r16 = bank0 size, total memory size
+ * r17 = bank1 size
+ * r18 = bank2 size
+ * r19 = bank3 size
+ * r20 = MCCR1, MSAR1
+ * r21 = MCCR3, MEAR1
+ * r22 = MCCR4, MBER
+ * r23 = EMSAR1
+ * r24 = EMEAR1
+ * r25 = save link register 1st level
+ * r26 = save link register 2nd level
+ * r27 = save link register 3rd level
+ * r30 = pointer to GPIO for spdRead
+ */
+
+
+.globl board_asm_init
+board_asm_init:
+/*
+ * setup pointer to message block
+ */
+    mflr    r25             /* save away link register */
+    bl      get_lnk_reg     /* r3=addr of next instruction */
+    subi    r4, r3, 8       /* r4=board_asm_init addr */
+    addi    r13, r4, (MessageBlock-board_asm_init)
+/*
+ * dcache_disable
+ */
+    mfspr   r3, HID0
+    li      r4, HID0_DCE
+    andc    r3, r3, r4
+    mr      r2, r3
+    ori     r3, r3, HID0_DCI
+    sync
+    mtspr   HID0, r3
+    mtspr   HID0, r2
+    isync
+    sync
+/*
+ * icache_disable
+ */
+    mfspr   r3, HID0
+    li      r4, 0
+    ori     r4, r4, HID0_ICE
+    andc    r3, r3, r4
+    sync
+    mtspr   HID0, r3
+/*
+ * invalidate caches
+ */
+    ori     r3, r3, (HID0_ICE | HID0_ICFI | HID0_DCI | HID0_DCE)
+    or      r4, r4, r3
+    isync
+    mtspr   HID0, r4
+    andc    r4, r4, r3
+    isync
+    mtspr   HID0, r4
+    isync
+/*
+ * icache_enable
+ */
+    mfspr   r3, HID0
+    ori     r3, r3, (HID0_ICE | HID0_ICFI)
+    sync
+    mtspr   HID0, r3
+
+    lis     r1, 0xfec0
+    ori     r1, r1, 0x0cf8
+    lis     r2, 0xfee0
+    ori     r2, r2, 0xcfc
+
+#ifdef CFG_ADDRESS_MAP_A
+/*
+ * Switch to address map A if necessary.
+ */
+    lis     r3, MPC106_REG@h
+    ori     r3, r3, PCI_PICR1
+    stwbrx  r3, 0, r1
+    sync
+    lwbrx   r4, 0, r2
+    sync
+    lis     r0, PICR1_XIO_MODE@h
+    ori     r0, r0, PICR1_XIO_MODE@l
+    andc    r4, r4, r0
+    lis     r0, PICR1_ADDRESS_MAP@h
+    ori     r0, r0, PICR1_ADDRESS_MAP@l
+    or      r4, r4, r0
+    stwbrx  r4, 0, r2
+    sync
+#endif
+
+/*
+ * Do the init for the SIO.
+ */
+    bl      .sioInit
+
+    addi    r3, r13, (MinitLogo-MessageBlock)
+    bl      Printf
+
+    addi    r3, r13, (Mspd01-MessageBlock)
+    bl      Printf
+/*
+ * Memory cofiguration using SPD information stored on the SODIMMs
+ */
+    li      r17, 0
+    li      r18, 0
+    li      r19, 0
+
+    li      r3, 0x0002          /* get RAM type from spd for bank0/1 */
+    bl      spdRead
+
+    cmpi    0, 0, r3, -1        /* error ? */
+    bne     noSpdError
+
+    addi    r3, r13, (Mfail-MessageBlock)
+    bl      Printf
+
+    li      r6, 0xe0            /* error codes in r6 and r7  */
+    li      r7, 0x00
+    b       toggleError         /* fail - loop forever */
+
+noSpdError:
+    mr      r15, r3             /* save r3 */
+
+    addi    r3, r13, (Mok-MessageBlock)
+    bl      Printf
+
+    cmpli   0, 0, r15, 0x0001   /* FPM ? */
+    beq     configFPM
+    cmpli   0, 0, r15, 0x0002   /* EDO ? */
+    beq     configEDO
+    cmpli   0, 0, r15, 0x0004   /* SDRAM ? */
+    beq     configSDRAM
+
+    li      r6, 0xe0            /* error codes in r6 and r7  */
+    li      r7, 0x01
+    b       toggleError         /* fail - loop forever */
+
+configSDRAM:
+    addi    r3, r13, (MsdRam-MessageBlock)
+    bl      Printf
+/*
+ * set the Memory Configuration Reg. 1
+ */
+    li      r3, 0x001f          /* get bank size from spd bank0/1 */
+    bl      spdRead
+
+    andi.   r3, r3, 0x0038
+    beq     SD16MB2B
+
+    li      r3, 0x0011          /* get number of internal banks */
+                                /* from spd for bank0/1 */
+    bl      spdRead
+
+    cmpli   0, 0, r3, 0x02
+    beq     SD64MB2B
+
+    cmpli   0, 0, r3, 0x04
+    beq     SD64MB4B
+
+    li      r6, 0xe0            /* error codes in r6 and r7  */
+    li      r7, 0x02
+    b       toggleError         /* fail - loop forever */
+
+SD64MB2B:
+    li      r20, 0x0005         /* 64-Mbit SDRAM 2 banks */
+    b       SDRow2nd
+
+SD64MB4B:
+    li      r20, 0x0000         /* 64-Mbit SDRAM 4 banks */
+    b       SDRow2nd
+
+SD16MB2B:
+    li      r20, 0x000f         /* 16-Mbit SDRAM 2 banks */
+
+SDRow2nd:
+    li      r3, 0x0102          /* get RAM type spd for bank2/3 */
+    bl      spdRead
+
+    cmpli   0, 0, r3, 0x0004
+    bne     S2D64MB4B           /* bank2/3 isn't present or no SDRAM */
+
+    li      r3, 0x011f          /* get bank size from spd bank2/3 */
+    bl      spdRead
+
+    andi.   r3, r3, 0x0038
+    beq     S2D16MB2B
+/*
+ * set the Memory Configuration Reg. 2
+ */
+    li      r3, 0x0111          /* get number of internal banks */
+                                /* from spd for bank2/3 */
+    bl      spdRead
+
+    cmpli   0, 0, r3, 0x02
+    beq     S2D64MB2B
+
+    cmpli   0, 0, r3, 0x04
+    beq     S2D64MB4B
+
+    li      r6, 0xe0            /* error codes in r6 and r7 */
+    li      r7, 0x03
+    b       toggleError         /* fail - loop forever */
+
+S2D64MB2B:
+    ori     r20, r20, 0x0050    /* 64-Mbit SDRAM 2 banks */
+    b       S2D64MB4B
+
+S2D16MB2B:
+    ori     r20, r20, 0x00f0    /* 16-Mbit SDRAM 2 banks */
+
+/*
+ * set the Memory Configuration Reg. 3
+ */
+S2D64MB4B:
+    lis     r21, 0x8630         /* BSTOPRE = 0x80, REFREC = 6, */
+                                /* RDLAT = 3 */
+
+/*
+ * set the Memory Configuration Reg. 4
+ */
+    lis     r22, 0x2430         /* PRETOACT = 2, ACTOPRE = 4, */
+                                /* WCBUF = 1, RCBUF = 1 */
+    ori     r22, r22, 0x2220    /* SDMODE = 0x022, ACTORW = 2 */
+
+/*
+ * get the size of bank 0-3
+ */
+    li      r3, 0x001f          /* get bank size from spd bank0/1 */
+    bl      spdRead
+
+    rlwinm  r16, r3, 2, 24, 29  /* calculate size in MByte */
+                                /* (128 MB max.) */
+
+    li      r3, 0x0005          /* get number of banks from spd */
+                                /* for bank0/1 */
+    bl      spdRead
+
+    cmpi    0, 0, r3, 2         /* 2 banks ? */
+    bne     SDRAMnobank1
+
+    mr      r17, r16
+
+SDRAMnobank1:
+    addi    r3, r13, (Mspd23-MessageBlock)
+    bl      Printf
+
+    li      r3, 0x0102          /* get RAM type spd for bank2/3 */
+    bl      spdRead
+
+    cmpli   0, 0, r3, 0x0001    /* FPM ? */
+    bne     noFPM23             /* handle as EDO */
+    addi    r3, r13, (Mok-MessageBlock)
+    bl      Printf
+    addi    r3, r13, (MfpmRam-MessageBlock)
+    bl      Printf
+    b       configRAMcommon
+noFPM23:
+    cmpli   0, 0, r3, 0x0002    /* EDO ? */
+    bne     noEDO23
+    addi    r3, r13, (Mok-MessageBlock)
+    bl      Printf
+    addi    r3, r13, (MedoRam-MessageBlock)
+    bl      Printf
+    b       configRAMcommon
+noEDO23:
+    cmpli   0, 0, r3, 0x0004    /* SDRAM ? */
+    bne    noSDRAM23
+    addi    r3, r13, (Mok-MessageBlock)
+    bl      Printf
+    addi    r3, r13, (MsdRam-MessageBlock)
+    bl      Printf
+    b       configSDRAM23
+noSDRAM23:
+    addi    r3, r13, (Mna-MessageBlock)
+    bl      Printf
+    b       configRAMcommon     /* bank2/3 isn't present or no SDRAM */
+
+configSDRAM23:
+    li      r3, 0x011f          /* get bank size from spd bank2/3 */
+    bl      spdRead
+
+    rlwinm  r18, r3, 2, 24, 29  /* calculate size in MByte */
+                                /* (128 MB max.) */
+
+    li      r3, 0x0105          /* get number of banks from */
+                                /* spd bank0/1 */
+    bl      spdRead
+
+    cmpi    0, 0, r3, 2         /* 2 banks ? */
+    bne     SDRAMnobank3
+
+    mr    r19, r18
+
+SDRAMnobank3:
+    b       configRAMcommon
+
+configFPM:
+    addi    r3, r13, (MfpmRam-MessageBlock)
+    bl      Printf
+    b       configEDO0
+/*
+ * set the Memory Configuration Reg. 1
+ */
+configEDO:
+    addi    r3, r13, (MedoRam-MessageBlock)
+    bl      Printf
+configEDO0:
+    lis     r20, MCCR1_TYPE_EDO@h
+
+getSpdRowBank01:
+    li      r3, 0x0003          /* get number of row bits from */
+                                /* spd from bank0/1 */
+    bl      spdRead
+    ori     r20, r20, (MCCR1_BK0_9BITS | MCCR1_BK1_9BITS)
+    cmpli   0, 0, r3, 0x0009    /* bank0 -  9 row bits */
+    beq     getSpdRowBank23
+
+    ori     r20, r20, (MCCR1_BK0_10BITS | MCCR1_BK1_10BITS)
+    cmpli   0, 0, r3, 0x000a    /* bank0 -  10 row bits */
+    beq     getSpdRowBank23
+
+    ori     r20, r20, (MCCR1_BK0_11BITS | MCCR1_BK1_11BITS)
+    cmpli   0, 0, r3, 0x000b    /* bank0 -  11 row bits */
+    beq     getSpdRowBank23
+
+    ori     r20, r20, (MCCR1_BK0_12BITS | MCCR1_BK1_12BITS)
+    cmpli   0, 0, r3, 0x000c    /* bank0 -  12 row bits */
+    beq     getSpdRowBank23
+
+    cmpli   0, 0, r3, 0x000d    /* bank0 -  13 row bits */
+    beq     getSpdRowBank23
+
+    li      r6, 0xe0            /* error codes in r6 and r7 */
+    li      r7, 0x10
+    b       toggleError         /* fail - loop forever */
+
+getSpdRowBank23:
+    li     r3, 0x0103           /* get number of row bits from */
+                                /* spd for bank2/3 */
+    bl      spdRead
+
+    ori     r20, r20, (MCCR1_BK2_9BITS | MCCR1_BK3_9BITS)
+    cmpli   0, 0, r3, 0x0009    /* bank0 -  9 row bits */
+    beq     writeRowBits
+
+    ori     r20, r20, (MCCR1_BK2_10BITS | MCCR1_BK3_10BITS)
+    cmpli   0, 0, r3, 0x000a    /* bank0 -  10 row bits */
+    beq     writeRowBits
+
+    ori     r20, r20, (MCCR1_BK2_11BITS | MCCR1_BK3_11BITS)
+    cmpli   0, 0, r3, 0x000b    /* bank0 -  11 row bits */
+    beq     writeRowBits
+
+    ori     r20, r20, (MCCR1_BK2_12BITS | MCCR1_BK3_12BITS)
+
+/*
+ * set the Memory Configuration Reg. 3
+ */
+writeRowBits:
+    lis     r21, 0x000a         /* CPX = 1, RAS6P = 4 */
+    ori     r21, r21, 0x2293    /* CAS5 = 2, CP4 = 1, */
+                                /* CAS3 = 2, RCD2 = 2, RP = 3 */
+/*
+ * set the Memory Configuration Reg. 4
+ */
+    lis     r22, 0x0010         /* all SDRAM parameter 0, */
+                                /* WCBUF flow through, */
+                                /* RCBUF registered */
+/*
+ * get the size of bank 0-3
+ */
+    li      r3, 0x0003          /* get row bits from spd  bank0/1 */
+    bl      spdRead
+
+    li      r16, 0              /* bank size is: */
+                                /* (8*2^row*2^column)/0x100000 MB */
+    ori     r16, r16, 0x8000
+    rlwnm   r16, r16, r3, 0, 31
+
+    li      r3, 0x0004          /* get column bits from spd bank0/1 */
+    bl      spdRead
+
+    rlwnm   r16, r16, r3, 0, 31
+
+    li      r3, 0x0005          /* get number of banks from */
+                                /* spd for bank0/1 */
+    bl      spdRead
+
+    cmpi    0, 0, r3, 2         /* 2 banks ? */
+    bne     EDOnobank1
+
+    mr      r17, r16
+
+EDOnobank1:
+    addi    r3, r13, (Mspd23-MessageBlock)
+    bl      Printf
+
+    li      r3, 0x0102          /* get RAM type spd for bank2/3 */
+    bl      spdRead
+
+    cmpli   0, 0, r3, 0x0001    /* FPM ? */
+    bne     noFPM231            /* handle as EDO */
+    addi    r3, r13, (Mok-MessageBlock)
+    bl      Printf
+    addi    r3, r13, (MfpmRam-MessageBlock)
+    bl      Printf
+    b       EDObank2
+noFPM231:
+    cmpli   0, 0, r3, 0x0002    /* EDO ? */
+    bne     noEDO231
+    addi    r3, r13, (Mok-MessageBlock)
+    bl      Printf
+    addi    r3, r13, (MedoRam-MessageBlock)
+    bl      Printf
+    b       EDObank2
+noEDO231:
+    cmpli   0, 0, r3, 0x0004    /* SDRAM ? */
+    bne     noSDRAM231
+    addi    r3, r13, (Mok-MessageBlock)
+    bl      Printf
+    addi    r3, r13, (MsdRam-MessageBlock)
+    bl      Printf
+    b       configRAMcommon
+noSDRAM231:
+    addi    r3, r13, (Mfail-MessageBlock)
+    bl      Printf
+    b       configRAMcommon     /* bank2/3 isn't present or no SDRAM */
+
+EDObank2:
+    li      r3, 0x0103          /* get row bits from spd for bank2/3 */
+    bl      spdRead
+
+    li      r18, 0              /* bank size is: */
+                                /* (8*2^row*2^column)/0x100000 MB */
+    ori     r18, r18, 0x8000
+    rlwnm   r18, r18, r3, 0, 31
+
+    li      r3, 0x0104          /* get column bits from spd bank2/3 */
+    bl      spdRead
+
+    rlwnm   r18, r18, r3, 0, 31
+
+    li      r3, 0x0105          /* get number of banks from */
+                                /* spd for bank2/3 */
+    bl      spdRead
+
+    cmpi    0, 0, r3, 2         /* 2 banks ? */
+    bne     configRAMcommon
+
+    mr      r19, r18
+
+configRAMcommon:
+    lis     r1, MPC106_REG_ADDR@h
+    ori     r1, r1, MPC106_REG_ADDR@l
+    lis     r2, MPC106_REG_DATA@h
+    ori     r2, r2, MPC106_REG_DATA@l
+
+    li      r0, 0
+
+/*
+ * If we are already running in RAM (debug mode), we should
+ * NOT reset the MEMGO flag. Otherwise we will stop all memory
+ * accesses.
+ */
+#ifdef IN_RAM
+    lis     r4, MCCR1_MEMGO@h
+    ori     r4, r4, MCCR1_MEMGO@l
+    or      r20, r20, r4
+#endif
+
+/*
+ * set the Memory Configuration Reg. 1
+ */
+    lis     r3, MPC106_REG@h        /* start building new reg number */
+    ori     r3, r3, MPC106_MCCR1    /* register number 0xf0 */
+    stwbrx  r3, r0, r1              /* write this value to CONFIG_ADDR */
+    eieio                           /* make sure mem. access is complete */
+    stwbrx  r20, r0, r2             /* write data to CONFIG_DATA */
+/*
+ * set the Memory Configuration Reg. 3
+ */
+    lis     r3, MPC106_REG@h        /* start building new reg number */
+    ori     r3, r3, MPC106_MCCR3    /* register number 0xf8 */
+    stwbrx  r3, r0, r1              /* write this value to CONFIG_ADDR */
+    eieio                           /* make sure mem. access is complete */
+    stwbrx    r21, r0, r2           /* write data to CONFIG_DATA */
+/*
+ * set the Memory Configuration Reg. 4
+ */
+    lis     r3, MPC106_REG@h        /* start building new reg number */
+    ori     r3, r3, MPC106_MCCR4    /* register number 0xfc */
+    stwbrx  r3, r0, r1              /* write this value to CONFIG_ADDR */
+    eieio                           /* make sure mem. access is complete */
+    stwbrx  r22, r0, r2             /* write data to CONFIG_DATA */
+/*
+ * set the memory boundary registers for bank 0-3
+ */
+    li      r20, 0
+    li      r23, 0
+    li      r24, 0
+    subi    r21, r16, 1         /* calculate end address bank0 */
+    li      r22, (MBER_BANK0)
+
+    cmpi    0, 0, r17, 0        /* bank1 present ? */
+    beq     nobank1
+
+    rlwinm  r3, r16, 8, 16, 23  /* calculate start address of bank1 */
+    or      r20, r20, r3
+    add     r16, r16, r17       /* add to total memory size */
+    subi    r3, r16, 1          /* calculate end address of bank1 */
+    rlwinm  r3, r3, 8, 16, 23
+    or      r21, r21, r3
+    ori     r22, r22, (MBER_BANK1)      /* enable bank1 */
+    b       bank2
+
+nobank1:
+    ori     r23, r23, 0x0300    /* set bank1 start to unused area */
+    ori     r24, r24, 0x0300    /* set bank1 end to unused area */
+
+bank2:
+    cmpi    0, 0, r18, 0        /* bank2 present ? */
+    beq     nobank2
+
+    andi.   r3, r16, 0x00ff     /* calculate start address of bank2 */
+    andi.   r4, r16, 0x0300
+    rlwinm  r3, r3, 16, 8, 15
+    or      r20, r20, r3
+    rlwinm  r3, r4, 8, 8, 15
+    or      r23, r23, r3
+    add     r16, r16, r18       /* add to total memory size */
+    subi    r3, r16, 1          /* calculate end address of bank2 */
+    andi.   r4, r3, 0x0300
+    andi.   r3, r3, 0x00ff
+    rlwinm  r3, r3, 16, 8, 15
+    or      r21, r21, r3
+    rlwinm  r3, r4, 8, 8, 15
+    or      r24, r24, r3
+    ori     r22, r22, (MBER_BANK2)    /* enable bank2 */
+    b       bank3
+
+nobank2:
+    lis     r3, 0x0003
+    or      r23, r23, r3        /* set bank2 start to unused area */
+    or      r24, r24, r3        /* set bank2 end to unused area */
+
+bank3:
+    cmpi    0, 0, r19, 0        /* bank3 present ? */
+    beq     nobank3
+
+    andi.   r3, r16, 0x00ff     /* calculate start address of bank3 */
+    andi.   r4, r16, 0x0300
+    rlwinm  r3, r3, 24, 0, 7
+    or      r20, r20, r3
+    rlwinm  r3, r4, 16, 0, 7
+    or      r23, r23, r3
+    add     r16, r16, r19       /* add to total memory size */
+    subi    r3, r16, 1          /* calculate end address of bank3 */
+    andi.   r4, r3, 0x0300
+    andi.   r3, r3, 0x00ff
+    rlwinm  r3, r3, 24, 0, 7
+    or      r21, r21, r3
+    rlwinm  r3, r4, 16, 0, 7
+    or      r24, r24, r3
+    ori     r22, r22, (MBER_BANK3)    /* enable bank3 */
+    b       writebound
+
+nobank3:
+    lis     r3, 0x0300
+    or      r23, r23, r3        /* set bank3 start to unused area */
+    or      r24, r24, r3        /* set bank3 end to unused area */
+
+writebound:
+    lis     r3, MPC106_REG@h    /* start building new reg number */
+    ori     r3, r3, MPC106_MSAR1    /* register number 0x80 */
+    stwbrx  r3, r0, r1          /* write this value to CONFIG_ADDR */
+    eieio                       /* make sure mem. access is complete */
+    stwbrx  r20, r0, r2         /* write data to CONFIG_DATA */
+
+    lis     r3, MPC106_REG@h    /* start building new reg number */
+    ori     r3, r3, MPC106_MEAR1    /* register number 0x90 */
+    stwbrx  r3, r0, r1          /* write this value to CONFIG_ADDR */
+    eieio                       /* make sure mem. access is complete */
+    stwbrx  r21, r0, r2         /* write data to CONFIG_DATA */
+
+    lis     r3, MPC106_REG@h    /* start building new reg number */
+    ori     r3, r3, MPC106_EMSAR1    /* register number 0x88 */
+    stwbrx  r3, r0, r1          /* write this value to CONFIG_ADDR */
+    eieio                       /* make sure mem. access is complete */
+    stwbrx  r23, r0, r2         /* write data to CONFIG_DATA */
+
+    lis     r3, MPC106_REG@h    /* start building new reg number */
+    ori     r3, r3, MPC106_EMEAR1    /* register number 0x98 */
+    stwbrx  r3, r0, r1          /* write this value to CONFIG_ADDR */
+    eieio                       /* make sure mem. access is complete */
+    stwbrx  r24, r0, r2         /* write data to CONFIG_DATA */
+
+/*
+ * set boundaries of unused banks to unused address space
+ */
+    lis     r4, 0x0303
+    ori     r4, r4, 0x0303      /* bank 4-7 start and end adresses */
+    lis     r3, MPC106_REG@h    /* start building new reg number */
+    ori     r3, r3, MPC106_EMSAR2    /* register number 0x8C */
+    stwbrx  r3, r0, r1          /* write this value to CONFIG_ADDR */
+    eieio                       /* make sure mem. access is complete */
+    stwbrx  r4, r0, r2          /* write data to CONFIG_DATA */
+
+    lis     r3, MPC106_REG@h    /* start building new reg number */
+    ori     r3, r3, MPC106_EMEAR2    /* register number 0x9C */
+    stwbrx  r3, r0, r1          /* write this value to CONFIG_ADDR */
+    eieio                       /* make sure mem. access is complete */
+    stwbrx  r4, r0, r2          /* write data to CONFIG_DATA */
+
+/*
+ * set the Memory Configuration Reg. 2
+ */
+    lis     r3, MPC106_REG@h    /* start building new reg number */
+    ori     r3, r3, MPC106_MCCR2    /* register number 0xf4 */
+    stwbrx  r3, r0, r1          /* write this value to CONFIG_ADDR */
+    eieio                       /* make sure mem. access is complete */
+
+    li      r3, 0x000c          /* get refresh from spd for bank0/1 */
+    bl      spdRead
+
+    cmpi    0, 0, r3, -1        /* error ? */
+    bne     common1
+
+    li      r6, 0xe0            /* error codes in r6 and r7  */
+    li      r7, 0x20
+    b       toggleError         /* fail - loop forever */
+
+common1:
+    andi.   r15, r3, 0x007f     /* mask selfrefresh bit */
+    li      r3, 0x010c          /* get refresh from spd for bank2/3 */
+    bl      spdRead
+
+    cmpi    0, 0, r3, -1        /* error ? */
+    beq     common2
+    andi.   r3, r3, 0x007f      /* mask selfrefresh bit */
+    cmp     0, 0, r3, r15       /* find the lower */
+    blt     common3
+
+common2:
+    mr      r3, r15
+
+common3:
+    li      r4, 0x1010          /* refesh cycle 1028 clocks */
+                                /*  left shifted 2 */
+    cmpli   0, 0, r3, 0x0000    /* 15.6 us ? */
+    beq     writeRefresh
+
+    li      r4, 0x0808          /* refesh cycle 514 clocks */
+                                /* left shifted 2 */
+    cmpli   0, 0, r3, 0x0002    /* 7.8 us ? */
+    beq     writeRefresh
+
+    li      r4, 0x2020          /* refesh cycle 2056 clocks */
+                                /* left shifted 2 */
+    cmpli   0, 0, r3, 0x0003    /* 31.3 us ? */
+    beq     writeRefresh
+
+    li      r4, 0x4040          /* refesh cycle 4112 clocks */
+                                /* left shifted 2 */
+    cmpli   0, 0, r3, 0x0004    /* 62.5 us ? */
+    beq     writeRefresh
+
+    li      r4, 0
+    ori     r4, r4, 0x8080      /* refesh cycle 8224 clocks */
+                                /* left shifted 2 */
+    cmpli   0, 0, r3, 0x0005    /* 125 us ? */
+    beq     writeRefresh
+
+    li      r6, 0xe0            /* error codes in r6 and r7 */
+    li      r7, 0x21
+    b       toggleError         /* fail - loop forever */
+
+writeRefresh:
+    stwbrx  r4, r0, r2          /* write data to CONFIG_DATA */
+
+/*
+ * DRAM BANKS SHOULD BE ENABLED
+ */
+    addi    r3, r13, (Mactivate-MessageBlock)
+    bl      Printf
+    mr      r3, r16
+    bl      OutDec
+    addi    r3, r13, (Mmbyte-MessageBlock)
+    bl      Printf
+
+    lis     r3, MPC106_REG@h    /* start building new reg number */
+    ori     r3, r3, MPC106_MBER /* register number 0xa0 */
+    stwbrx  r3, r0, r1          /* write this value to CONFIG_ADDR */
+    eieio                       /* make sure mem. access is complete */
+    stb     r22, 0(r2)          /* write data to CONFIG_DATA */
+    li      r8, 0x63            /* PGMAX = 99 */
+    stb     r8, 3(r2)           /* write data to CONFIG_DATA */
+
+/*
+ *  DRAM SHOULD NOW BE CONFIGURED AND ENABLED
+ *  MUST WAIT 200us BEFORE ACCESSING
+ */
+    li      r0, 0x7800
+    mtctr   r0
+
+wait200us:
+    bdnz    wait200us
+
+    lis     r3, MPC106_REG@h    /* start building new reg number */
+    ori     r3, r3, MPC106_MCCR1    /* register number 0xf0 */
+    stwbrx  r3, r0, r1          /* write this value to CONFIG_ADDR */
+    eieio                       /* make sure mem. access is complete */
+
+    lwbrx   r4, r0, r2          /* load r4 from CONFIG_DATA */
+
+    lis     r0, MCCR1_MEMGO@h   /* MEMGO=1 */
+    ori     r0, r0, MCCR1_MEMGO@l
+    or      r4, r4, r0          /* set the MEMGO bit */
+    stwbrx  r4, r0, r2          /* write mdfd data to CONFIG_DATA */
+
+    li      r0, 0x7000
+    mtctr   r0
+
+wait8ref:
+    bdnz    wait8ref
+
+    addi    r3, r13, (Mok-MessageBlock)
+    bl      Printf
+
+    mtlr    r25
+    blr
+
+/*
+ * Infinite loop called in case of an error during RAM initialisation.
+ * error codes in r6 and r7.
+ */
+toggleError:
+    li      r0, 0
+    lis     r9, 127
+    ori     r9, r9, 65535
+toggleError1:
+    addic   r0, r0, 1
+    cmpw    cr1, r0, r9
+    ble     cr1, toggleError1
+    li      r0, 0
+    lis     r9, 127
+    ori     r9, r9, 65535
+toggleError2:
+    addic   r0, r0, 1
+    cmpw    cr1, r0, r9
+    ble     cr1, toggleError2
+    b       toggleError
+
+
+/******************************************************************************
+ * This function performs a basic initialisation of the superio chip
+ * to enable basic console output and SPD access during RAM initialisation.
+ *
+ * Upon completion, SIO resource registers are mapped as follows:
+ * Resource     Enabled         Address
+ * UART1        Yes             3F8-3FF COM1
+ * UART2        Yes             2F8-2FF COM2
+ * GPIO         Yes             220-227
+ */
+.set    SIO_LUNINDEX, 0x07      /* SIO LUN index register */
+.set    SIO_CNFG1, 0x21         /* SIO configuration #1 register */
+.set    SIO_PCSCI, 0x23         /* SIO PCS configuration index reg */
+.set    SIO_PCSCD, 0x24         /* SIO PCS configuration data reg */
+.set    SIO_ACTIVATE, 0x30      /* SIO activate register */
+.set    SIO_IOBASEHI, 0x60      /* SIO I/O port base address, 15:8 */
+.set    SIO_IOBASELO, 0x61      /* SIO I/O port base address, 7:0 */
+.set    SIO_LUNENABLE, 0x01     /* SIO LUN enable */
+
+.sioInit:
+    mfspr   r7, 8               /* save link register */
+
+.sioInit_87308:
+
+/*
+ * Get base addr of ISA I/O space
+ */
+    lis     r6, CFG_ISA_IO@h
+    ori     r6, r6, CFG_ISA_IO@l
+
+/*
+ * Set offset to base address for config registers.
+ */
+#if defined(CFG_NS87308_BADDR_0x)
+    addi    r4, r0, 0x0279
+#elif defined(CFG_NS87308_BADDR_10)
+    addi    r4, r0, 0x015C
+#elif defined(CFG_NS87308_BADDR_11)
+    addi    r4, r0, 0x002E
+#endif
+    add     r6, r6, r4          /* add offset to base */
+    or      r3, r6, r6          /* make a copy */
+
+/*
+ * PMC (LUN 8)
+ */
+    addi    r4, r0, SIO_LUNINDEX    /* select PMC LUN */
+    addi    r5, r0, 0x8
+    bl      .sio_bw
+    addi    r4, r0, SIO_IOBASEHI    /* initialize PMC address to 0x460 */
+    addi    r5, r0, 0x04
+    bl      .sio_bw
+    addi    r4, r0, SIO_IOBASELO
+    addi    r5, r0, 0x60
+    bl      .sio_bw
+    addi    r4, r0, SIO_ACTIVATE    /* enable PMC */
+    addi    r5, r0, SIO_LUNENABLE
+    bl      .sio_bw
+
+    lis     r8, CFG_ISA_IO@h
+    ori     r8, r8, 0x0460
+    li      r9, 0x03
+    stb     r9, 0(r8)               /* select PMC2 register */
+    eieio
+    li      r9, 0x00
+    stb     r9, 1(r8)               /* SuperI/O clock src: 24MHz via X1 */
+    eieio
+
+/*
+ * map UART1 (LUN 6) or UART2 (LUN 5) to COM1 (0x3F8)
+ */
+    addi    r4, r0, SIO_LUNINDEX    /* select COM1 LUN */
+    addi    r5, r0, 0x6
+    bl      .sio_bw
+
+    addi    r4, r0, SIO_IOBASEHI    /* initialize COM1 address to 0x3F8 */
+    addi    r5, r0, 0x03
+    bl      .sio_bw
+
+    addi    r4, r0, SIO_IOBASELO
+    addi    r5, r0, 0xF8
+    bl      .sio_bw
+
+    addi    r4, r0, SIO_ACTIVATE    /* enable COM1 */
+    addi    r5, r0, SIO_LUNENABLE
+    bl      .sio_bw
+
+/*
+ * Init COM1 for polled output
+ */
+    lis     r8, CFG_ISA_IO@h
+    ori     r8, r8, 0x03f8
+    li      r9, 0x00
+    stb     r9, 1(r8)           /* int disabled */
+    eieio
+    li      r9, 0x00
+    stb     r9, 4(r8)           /* modem ctrl */
+    eieio
+    li      r9, 0x80
+    stb     r9, 3(r8)           /* link ctrl, bank select */
+    eieio
+    li      r9, 115200/CONFIG_BAUDRATE
+    stb     r9, 0(r8)           /* baud rate (LSB)*/
+    eieio
+    rotrwi  r9, r9, 8
+    stb     r9, 1(r8)           /* baud rate (MSB) */
+    eieio
+    li      r9, 0x03
+    stb     r9, 3(r8)           /* 8 data bits, 1 stop bit, */
+                                /* no parity */
+    eieio
+    li      r9, 0x0b
+    stb     r9, 4(r8)           /* enable the receiver and transmitter */
+    eieio
+
+waitEmpty:
+    lbz     r9, 5(r8)           /* transmit empty */
+    andi.   r9, r9, 0x40
+    beq     waitEmpty
+    li      r9, 0x47
+    stb     r9, 3(r8)           /* send break, 8 data bits, */
+                                /* 2 stop bits, no parity */
+    eieio
+
+    lis     r0, 0x0001
+    mtctr   r0
+
+waitCOM1:
+    lwz     r0, 5(r8)           /* load from port for delay */
+    bdnz    waitCOM1
+
+waitEmpty1:
+    lbz     r9, 5(r8)           /* transmit empty */
+    andi.   r9, r9, 0x40
+    beq     waitEmpty1
+    li      r9, 0x07
+    stb     r9, 3(r8)           /* 8 data bits, 2 stop bits, */
+                                /* no parity */
+    eieio
+
+/*
+ * GPIO (LUN 7)
+ */
+    addi    r4, r0, SIO_LUNINDEX    /* select GPIO LUN */
+    addi    r5, r0, 0x7
+    bl      .sio_bw
+
+    addi    r4, r0, SIO_IOBASEHI    /* initialize GPIO address to 0x220 */
+    addi    r5, r0, 0x02
+    bl      .sio_bw
+
+    addi    r4, r0, SIO_IOBASELO
+    addi    r5, r0, 0x20
+    bl      .sio_bw
+
+    addi    r4, r0, SIO_ACTIVATE    /* enable GPIO */
+    addi    r5, r0, SIO_LUNENABLE
+    bl      .sio_bw
+
+.sioInit_done:
+
+/*
+ * Get base addr of ISA I/O space
+ */
+    lis     r3, CFG_ISA_IO@h
+    ori     r3, r3, CFG_ISA_IO@l
+
+    addi    r3, r3, 0x015C      /* adjust to superI/O 87308 base */
+    or      r6, r3, r3          /* make a copy */
+/*
+ * CS0
+ */
+    addi    r4, r0, SIO_PCSCI   /* select PCSCIR */
+    addi    r5, r0, 0x00
+    bl      .sio_bw
+    addi    r4, r0, SIO_PCSCD   /* select PCSCDR */
+    addi    r5, r0, 0x00
+    bl      .sio_bw
+    addi    r4, r0, SIO_PCSCI   /* select PCSCIR */
+    addi    r5, r0, 0x01
+    bl      .sio_bw
+    addi    r4, r0, SIO_PCSCD   /* select PCSCDR */
+    addi    r5, r0, 0x76
+    bl      .sio_bw
+    addi    r4, r0, SIO_PCSCI   /* select PCSCIR */
+    addi    r5, r0, 0x02
+    bl      .sio_bw
+    addi    r4, r0, SIO_PCSCD   /* select PCSCDR */
+    addi    r5, r0, 0x40
+    bl      .sio_bw
+/*
+ * CS1
+ */
+    addi    r4, r0, SIO_PCSCI   /* select PCSCIR */
+    addi    r5, r0, 0x05
+    bl      .sio_bw
+    addi    r4, r0, SIO_PCSCD   /* select PCSCDR */
+    addi    r5, r0, 0x00
+    bl      .sio_bw
+    addi    r4, r0, SIO_PCSCI   /* select PCSCIR */
+    addi    r5, r0, 0x05
+    bl      .sio_bw
+    addi    r4, r0, SIO_PCSCD   /* select PCSCDR */
+    addi    r5, r0, 0x70
+    bl      .sio_bw
+    addi    r4, r0, SIO_PCSCI   /* select PCSCIR */
+    addi    r5, r0, 0x06
+    bl      .sio_bw
+    addi    r4, r0, SIO_PCSCD   /* select PCSCDR */
+    addi    r5, r0, 0x1C
+    bl      .sio_bw
+/*
+ * CS2
+ */
+    addi    r4, r0, SIO_PCSCI   /* select PCSCIR */
+    addi    r5, r0, 0x08
+    bl      .sio_bw
+    addi    r4, r0, SIO_PCSCD   /* select PCSCDR */
+    addi    r5, r0, 0x00
+    bl      .sio_bw
+    addi    r4, r0, SIO_PCSCI   /* select PCSCIR */
+    addi    r5, r0, 0x09
+    bl      .sio_bw
+    addi    r4, r0, SIO_PCSCD   /* select PCSCDR */
+    addi    r5, r0, 0x71
+    bl      .sio_bw
+    addi    r4, r0, SIO_PCSCI   /* select PCSCIR */
+    addi    r5, r0, 0x0A
+    bl      .sio_bw
+    addi    r4, r0, SIO_PCSCD   /* select PCSCDR */
+    addi    r5, r0, 0x1C
+    bl      .sio_bw
+
+    mtspr   8, r7               /* restore link register */
+    bclr    20, 0               /* return to caller */
+
+/*
+ * this function writes a register to the SIO chip
+ */
+.sio_bw:
+    stb     r4, 0(r3)           /* write index register with register offset */
+    eieio
+    sync
+    stb     r5, 1(r3)           /* 1st write */
+    eieio
+    sync
+    stb     r5, 1(r3)           /* 2nd write */
+    eieio
+    sync
+    bclr    20, 0               /* return to caller */
+/*
+ * this function reads a register from the SIO chip
+ */
+.sio_br:
+    stb     r4, 0(r3)           /* write index register with register offset */
+    eieio
+    sync
+    lbz     r3, 1(r3)           /* retrieve specified reg offset contents */
+    eieio
+    sync
+    bclr    20, 0               /* return to caller */
+
+/*
+ * Print a message to COM1 in polling mode
+ * r10=COM1 port, r3=(char*)string
+ */
+.globl Printf
+Printf:
+    lis     r10, CFG_ISA_IO@h   /* COM1 port */
+    ori     r10, r10, 0x03f8
+
+WaitChr:
+    lbz     r0, 5(r10)          /* read link status */
+    eieio
+    andi.   r0, r0, 0x40        /* mask transmitter empty bit */
+    beq     cr0, WaitChr        /* wait till empty */
+    lbzx    r0, r0, r3          /* get char */
+    stb     r0, 0(r10)          /* write to transmit reg */
+    eieio
+    addi    r3, r3, 1           /* next char */
+    lbzx    r0, r0, r3          /* get char */
+    cmpwi   cr1, r0, 0          /* end of string ? */
+    bne     cr1, WaitChr
+    blr
+
+/*
+ * Print 8/4/2 digits hex value to COM1 in polling mode
+ * r10=COM1 port, r3=val
+ */
+OutHex2:
+    li      r9, 4               /* shift reg for 2 digits */
+    b       OHstart
+OutHex4:
+    li      r9, 12              /* shift reg for 4 digits */
+    b       OHstart
+    .globl OutHex
+OutHex:
+    li      r9, 28              /* shift reg for 8 digits */
+OHstart:
+    lis     r10, CFG_ISA_IO@h   /* COM1 port */
+    ori     r10, r10, 0x03f8
+OutDig:
+    lbz     r0, 5(r10)          /* read link status */
+    eieio
+    andi.   r0, r0, 0x40        /* mask transmitter empty bit */
+    beq     cr0, OutDig
+    sraw    r0, r3, r9
+    clrlwi  r0, r0, 28
+    cmpwi   cr1, r0, 9
+    ble     cr1, digIsNum
+    addic   r0, r0, 55
+    b       nextDig
+digIsNum:
+    addic   r0, r0, 48
+nextDig:
+    stb     r0, 0(r10)          /* write to transmit reg */
+    eieio
+    addic.  r9, r9, -4
+    bge     OutDig
+    blr
+/*
+ * Print 3 digits hdec value to COM1 in polling mode
+ * r10=COM1 port, r3=val, r7=x00, r8=x0, r9=x, r0, r6=scratch
+ */
+.globl OutDec
+OutDec:
+    li      r6, 10
+    divwu   r0, r3, r6          /* r0 = r3 / 10, r9 = r3 mod 10 */
+    mullw   r10, r0, r6
+    subf    r9, r10, r3
+
+    mr      r3, r0
+    divwu   r0, r3, r6          /* r0 = r3 / 10, r8 = r3 mod 10 */
+    mullw   r10, r0, r6
+    subf    r8, r10, r3
+
+    mr      r3, r0
+    divwu   r0, r3, r6          /* r0 = r3 / 10, r7 = r3 mod 10 */
+    mullw   r10, r0, r6
+    subf    r7, r10, r3
+
+    lis     r10, CFG_ISA_IO@h   /* COM1 port */
+    ori     r10, r10, 0x03f8
+
+    or.     r7, r7, r7
+    bne     noblank1
+    li      r3, 0x20
+    b       OutDec4
+
+noblank1:
+    addi    r3, r7, 48          /* convert to ASCII */
+
+OutDec4:
+    lbz     r0, 0(r13)          /* slow down dummy read */
+    lbz     r0, 5(r10)          /* read link status */
+    eieio
+    andi.   r0, r0, 0x40        /* mask transmitter empty bit */
+    beq     cr0, OutDec4
+    stb     r3, 0(r10)          /* x00 to transmit */
+    eieio
+
+    or.     r7, r7, r8
+    beq     OutDec5
+
+    addi    r3, r8, 48          /* convert to ASCII */
+OutDec5:
+    lbz     r0, 0(r13)          /* slow down dummy read */
+    lbz     r0, 5(r10)          /* read link status */
+    eieio
+    andi.   r0, r0, 0x40        /* mask transmitter empty bit */
+    beq     cr0, OutDec5
+    stb     r3, 0(r10)          /* x0  to transmit */
+    eieio
+
+    addi    r3, r9, 48          /* convert to ASCII */
+OutDec6:
+    lbz     r0, 0(r13)          /* slow down dummy read */
+    lbz     r0, 5(r10)          /* read link status */
+    eieio
+    andi.   r0, r0, 0x40        /* mask transmitter empty bit */
+    beq     cr0, OutDec6
+    stb     r3, 0(r10)          /* x   to transmit */
+    eieio
+    blr
+/*
+ * Print a char to COM1 in polling mode
+ * r10=COM1 port, r3=char
+ */
+.globl    OutChr
+OutChr:
+    lis     r10, CFG_ISA_IO@h   /* COM1 port */
+    ori     r10, r10, 0x03f8
+
+OutChr1:
+    lbz     r0, 5(r10)          /* read link status */
+    eieio
+    andi.   r0, r0, 0x40        /* mask transmitter empty bit */
+    beq     cr0, OutChr1        /* wait till empty */
+    stb     r3, 0(r10)          /* write to transmit reg */
+    eieio
+    blr
+/*
+ * Input:  r3 adr to read
+ * Output: r3 val or -1 for error
+ */
+spdRead:
+    mfspr   r26, 8              /* save link register */
+
+    lis     r30, CFG_ISA_IO@h
+    ori     r30, r30, 0x220     /* GPIO Port 1 */
+    li      r7, 0x00
+    li      r8, 0x100
+    and.    r5, r3, r8
+    beq     spdbank0
+    li      r12, 0x08
+    li      r4, 0x10
+    li      r6, 0x18
+    b       spdRead1
+
+spdbank0:
+    li      r12, 0x20           /* set I2C data */
+    li      r4, 0x40            /* set I2C clock */
+    li      r6, 0x60            /* set I2C clock and data */
+
+spdRead1:
+    li      r8, 0x80
+
+    bl      spdStart            /* access I2C bus as master */
+    li      r10, 0xa0           /* write to SPD */
+    bl      spdWriteByte
+    bl      spdReadAck          /* ACK returns in r10 */
+    cmpw    cr0, r10, r7
+    bne     AckErr              /* r10 must be 0, if ACK received */
+    mr      r10, r3             /* adr to read */
+    bl      spdWriteByte
+    bl      spdReadAck
+    cmpw    cr0, r10, r7
+    bne     AckErr
+    bl      spdStart
+    li      r10, 0xa1           /* read from SPD */
+    bl      spdWriteByte
+    bl      spdReadAck
+    cmpw    cr0, r10, r7
+    bne     AckErr
+    bl      spdReadByte         /* return val in r10 */
+    bl      spdWriteAck
+    bl      spdStop             /* release I2C bus */
+    mr      r3, r10
+    mtspr   8, r26              /* restore link register */
+    blr
+/*
+ * ACK error occurred
+ */
+AckErr:
+    bl      spdStop
+    orc     r3, r0, r0          /* return -1 */
+    mtspr   8, r26              /* restore link register */
+    blr
+
+/*
+ * Routines to read from RAM spd.
+ * r30 - GPIO Port1 address in all cases.
+ * r4 - clock mask for SPD
+ * r6 - port mask for SPD
+ * r12 - data mask for SPD
+ */
+waitSpd:
+    li      r0, 0x1000
+    mtctr   r0
+wSpd:
+    bdnz    wSpd
+    bclr    20, 0               /* return to caller */
+
+/*
+ * establish START condition on I2C bus
+ */
+spdStart:
+    mfspr   r27, 8              /* save link register */
+    stb     r6, 0(r30)          /* set SDA and SCL */
+    eieio
+    stb     r6, 1(r30)          /* switch GPIO to output */
+    eieio
+    bl      waitSpd
+    stb     r4, 0(r30)          /* reset SDA */
+    eieio
+    bl      waitSpd
+    stb     r7, 0(r30)          /* reset SCL */
+    eieio
+    bl      waitSpd
+    mtspr   8, r27
+    bclr    20, 0               /* return to caller */
+
+/*
+ * establish STOP condition on I2C bus
+ */
+spdStop:
+    mfspr   r27, 8              /* save link register */
+    stb     r7, 0(r30)          /* reset SCL and SDA */
+    eieio
+    stb     r6, 1(r30)          /* switch GPIO to output */
+    eieio
+    bl      waitSpd
+    stb     r4, 0(r30)          /* set SCL */
+    eieio
+    bl      waitSpd
+    stb     r6, 0(r30)          /* set SDA and SCL */
+    eieio
+    bl      waitSpd
+    stb     r7, 1(r30)          /* switch GPIO to input */
+    eieio
+    mtspr   8, r27
+    bclr    20, 0               /* return to caller */
+
+spdReadByte:
+    mfspr   r27, 8
+    stb     r4, 1(r30)          /* set GPIO for SCL output */
+    eieio
+    li      r9, 0x08
+    li      r10, 0x00
+loopRB:
+    stb     r7, 0(r30)          /* reset SDA and SCL */
+    eieio
+    bl      waitSpd
+    stb     r4, 0(r30)          /* set SCL */
+    eieio
+    bl      waitSpd
+    lbz     r5, 0(r30)          /* read from GPIO Port1 */
+    rlwinm  r10, r10, 1, 0, 31
+    and.    r5, r5, r12
+    beq     clearBit
+    ori     r10, r10, 0x01      /* append _1_ */
+clearBit:
+    stb     r7, 0(r30)          /* reset SCL */
+    eieio
+    bl      waitSpd
+    addic.  r9, r9, -1
+    bne     loopRB
+    mtspr   8, r27
+    bclr    20, 0               /* return (r10) to caller */
+
+/*
+ * spdWriteByte writes bits 24 - 31 of r10 to I2C.
+ * r8 contains bit mask 0x80
+ */
+spdWriteByte:
+    mfspr   r27, 8              /* save link register */
+    li      r9, 0x08            /* write octet */
+    and.    r5, r10, r8
+    bne     sWB1
+    stb     r7, 0(r30)          /* set SDA to _0_ */
+    eieio
+    b       sWB2
+sWB1:
+    stb     r12, 0(r30)         /* set SDA to _1_ */
+    eieio
+sWB2:
+    stb     r6, 1(r30)          /* set GPIO to output */
+    eieio
+loopWB:
+    and.    r5, r10, r8
+    bne     sWB3
+    stb     r7, 0(r30)          /* set SDA to _0_ */
+    eieio
+    b       sWB4
+sWB3:
+    stb     r12, 0(r30)         /* set SDA to _1_ */
+    eieio
+sWB4:
+    bl      waitSpd
+    and.    r5, r10, r8
+    bne     sWB5
+    stb     r4, 0(r30)          /* set SDA to _0_ and SCL */
+    eieio
+    b       sWB6
+sWB5:
+    stb     r6, 0(r30)          /* set SDA to _1_ and SCL */
+    eieio
+sWB6:
+    bl      waitSpd
+    and.    r5, r10, r8
+    bne     sWB7
+    stb     r7, 0(r30)          /* set SDA to _0_ and reset SCL */
+    eieio
+    b       sWB8
+sWB7:
+    stb     r12, 0(r30)         /* set SDA to _1_ and reset SCL */
+    eieio
+sWB8:
+    bl      waitSpd
+    rlwinm  r10, r10, 1, 0, 31  /* next bit */
+    addic.  r9, r9, -1
+    bne     loopWB
+    mtspr   8, r27
+    bclr    20, 0               /* return to caller */
+
+/*
+ * Read ACK from SPD, return value in r10
+ */
+spdReadAck:
+    mfspr   r27, 8              /* save link register */
+    stb     r4, 1(r30)          /* set GPIO to output */
+    eieio
+    stb     r7, 0(r30)          /* reset SDA and SCL */
+    eieio
+    bl      waitSpd
+    stb     r4, 0(r30)          /* set SCL */
+    eieio
+    bl      waitSpd
+    lbz     r10, 0(r30)         /* read GPIO Port 1 and mask SDA */
+    and     r10, r10, r12
+    bl      waitSpd
+    stb     r7, 0(r30)          /* reset SDA and SCL */
+    eieio
+    bl      waitSpd
+    mtspr   8, r27
+    bclr    20, 0               /* return (r10) to caller */
+
+spdWriteAck:
+    mfspr   r27, 8
+    stb     r12, 0(r30)         /* set SCL */
+    eieio
+    stb     r6, 1(r30)          /* set GPIO to output */
+    eieio
+    bl      waitSpd
+    stb     r6, 0(r30)          /* SDA and SCL */
+    eieio
+    bl      waitSpd
+    stb     r12, 0(r30)         /* reset SCL */
+    eieio
+    bl      waitSpd
+    mtspr   8, r27
+    bclr    20, 0               /* return to caller */
+
+get_lnk_reg:
+    mflr    r3                  /* return link reg */
+    blr
+
+/*
+ * Messages for console output
+ */
+.globl MessageBlock
+MessageBlock:
+Mok:
+    .ascii  "OK\015\012\000"
+Mfail:
+    .ascii  "FAILED\015\012\000"
+Mna:
+    .ascii  "NA\015\012\000"
+MinitLogo:
+    .ascii  "\015\012*** ELTEC Elektronik, Mainz ***\015\012"
+    .ascii  "\015\012Initialising RAM\015\012\000"
+Mspd01:
+    .ascii  "       Reading SPD of bank0/1 ..... \000"
+Mspd23:
+    .ascii  "       Reading SPD of bank2/3 ..... \000"
+MfpmRam:
+    .ascii  "       RAM-Type: FPM \015\012\000"
+MedoRam:
+    .ascii  "       RAM-Type: EDO \015\012\000"
+MsdRam:
+    .ascii  "       RAM-Type: SDRAM \015\012\000"
+Mactivate:
+    .ascii  "       Activating \000"
+Mmbyte:
+    .ascii  " MB .......... \000"
+    .align  4
+
+
+
+
+
+
+
+
+
+
+
+
diff --git a/board/eltec/bab7xx/el_srom.c b/board/eltec/bab7xx/el_srom.c
new file mode 100644
index 0000000..56abdc7
--- /dev/null
+++ b/board/eltec/bab7xx/el_srom.c
@@ -0,0 +1,292 @@
+/*
+ * (C) Copyright 2002 ELTEC Elektronik AG
+ * Frank Gottschling <fgottschling@eltec.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include "srom.h"
+
+/*----------------------------------------------------------------------------*/
+/*
+ *  START sequence
+ *        _ _________
+ *  SCLK  _>         \____
+ *        _ ____
+ *  SDIO  _>    \_________
+ *         :    :    :
+ */
+static void eepStart (void)
+{
+    out8(I2C_BUS_DAT, 0x60);     /* SCLK = high  SDIO = high */
+    out8(I2C_BUS_DIR, 0x60);     /* set output direction for SCLK/SDIO */
+    udelay(10);
+    out8(I2C_BUS_DAT, 0x40);     /* SCLK = high  SDIO = low */
+    udelay(10);
+    out8(I2C_BUS_DAT, 0x00);     /* SCLK = low   SDIO = low */
+    udelay(10);
+}
+
+/*----------------------------------------------------------------------------*/
+/*
+ *  STOP sequence
+ *              _______
+ *  SCLK  _____/
+ *        _         ___
+ *  SDIO  _>_______/
+ *         :   :   :
+ */
+static void eepStop (void)
+{
+    out8(I2C_BUS_DAT, 0x00);      /* SCLK = low   SDIO = low */
+    out8(I2C_BUS_DIR, 0x60);      /* set output direction for SCLK/SDIO */
+    udelay(10);
+    out8(I2C_BUS_DAT, 0x40);      /* SCLK = high  SDIO = low */
+    udelay(10);
+    out8(I2C_BUS_DAT, 0x60);      /* SCLK = high  SDIO = high */
+    udelay(10);
+    out8(I2C_BUS_DIR, 0x00);      /* reset to input direction */
+}
+
+/*----------------------------------------------------------------------------*/
+/*
+ *  Read one byte from EEPROM
+ *            ___     ___     ___     ___     ___     ___     ___     ___
+ *  SCLK  ___/   \___/   \___/   \___/   \___/   \___/   \___/   \___/   \
+ *        _________________________________________________________________
+ *  SDIO  >     ^       ^       ^       ^       ^       ^       ^       ^
+ *        :  :   :   :   :   :   :   :   :   :   :   :   :   :   :   :   :
+ */
+static unsigned char eepReadByte (void)
+{
+    register unsigned char buf = 0x00;
+    register int i;
+
+    out8(I2C_BUS_DIR, 0x40);
+
+    for (i = 0; i < 8; i++)
+    {
+        out8(I2C_BUS_DAT, 0x00);    /* SCLK = low   SDIO = high */
+        udelay(10);
+        out8(I2C_BUS_DAT, 0x40);    /* SCLK = high  SDIO = high */
+        udelay(15);
+        buf <<= 1;
+        buf = (in8(I2C_BUS_DAT) & 0x20) ? (buf | 0x01) : (buf & 0xFE);
+        out8(I2C_BUS_DAT, 0x00);    /* SCLK = low   SDIO = high */
+        udelay(10);
+    }
+    return(buf);
+}
+
+/*----------------------------------------------------------------------------*/
+/*
+ *  Write one byte to EEPROM
+ *           ___     ___     ___     ___     ___     ___     ___     ___
+ *  SCLK  __/   \___/   \___/   \___/   \___/   \___/   \___/   \___/   \__
+ *         _______ _______ _______ _______ _______ _______ _______ ________
+ *  SDIO  X_______X_______X_______X_______X_______X_______X_______X________
+ *      :   7   :   6   :   5   :   4   :   3   :   2   :   1   :   0
+ */
+static void eepWriteByte (register unsigned char buf)
+{
+    register int    i;
+
+    (buf & 0x80) ? out8(I2C_BUS_DAT, 0x20) : out8(I2C_BUS_DAT, 0x00);     /* SCLK = low   SDIO = data */
+    out8(I2C_BUS_DIR, 0x60);
+
+    for (i = 7; i >= 0; i--)
+    {
+        (buf & 0x80) ? out8(I2C_BUS_DAT, 0x20) : out8(I2C_BUS_DAT, 0x00); /* SCLK=low  SDIO=data */
+        udelay(10);
+        (buf & 0x80) ? out8(I2C_BUS_DAT, 0x60) : out8(I2C_BUS_DAT, 0x40); /* SCLK=high SDIO=data */
+        udelay(15);
+        (buf & 0x80) ? out8(I2C_BUS_DAT, 0x20) : out8(I2C_BUS_DAT, 0x00); /* SCLK=low  SDIO=data */
+        udelay(10);
+        buf <<= 1;
+    }
+}
+
+/*----------------------------------------------------------------------------*/
+/*
+ *  Read data acknowledge of EEPROM
+ *             _______
+ *  SCLK  ____/       \___
+ *         _______________
+ *  SDIO  >
+ *        :   :   ^   :
+ */
+static int eepReadAck (void)
+{
+    int retval;
+
+    out8(I2C_BUS_DIR, 0x40);
+    out8(I2C_BUS_DAT, 0x00);            /* SCLK = low   SDIO = high */
+    udelay(10);
+    out8(I2C_BUS_DAT, 0x40);            /* SCLK = high  SDIO = high */
+    udelay(10);
+    retval = (in8(I2C_BUS_DAT) & 0x20) ? ERROR : 0;
+    udelay(10);
+    out8(I2C_BUS_DAT, 0x00);            /* SCLK = low   SDIO = high */
+    udelay(10);
+
+    return(retval);
+}
+
+/*----------------------------------------------------------------------------*/
+/*
+ *  Write data acknowledge to EEPROM
+ *             _______
+ *  SCLK  ____/       \___
+ *
+ *  SDIO  >_______________
+ *        :   :       :
+ */
+static void eepWriteAck (unsigned char ack)
+{
+    ack ? out8(I2C_BUS_DAT, 0x20) : out8(I2C_BUS_DAT, 0x00); /* SCLK = low   SDIO = ack */
+    out8(I2C_BUS_DIR, 0x60);
+    udelay(10);
+    ack ? out8(I2C_BUS_DAT, 0x60) : out8(I2C_BUS_DAT, 0x40); /* SCLK = high  SDIO = ack */
+    udelay(15);
+    ack ? out8(I2C_BUS_DAT, 0x20) : out8(I2C_BUS_DAT, 0x00); /* SCLK = low   SDIO = ack */
+    udelay(10);
+}
+
+/*----------------------------------------------------------------------------*/
+/*
+ * Read bytes from EEPROM
+ */
+int el_srom_load (addr, buf, cnt, device, block)
+unsigned char addr;
+unsigned char *buf;
+int cnt;
+unsigned char device;
+unsigned char block;
+{
+    register int i;
+
+    for (i=0;i<cnt;i++)
+    {
+        eepStart();
+        eepWriteByte(0xA0 | device | block);
+        if (eepReadAck() == ERROR)
+        {
+           eepStop();
+            return(ERROR);
+        }
+        eepWriteByte(addr++);
+        if (eepReadAck() == ERROR)
+        {
+            eepStop();
+            return(ERROR);
+        }
+        eepStart();
+
+        eepWriteByte(0xA1 | device | block);
+        if (eepReadAck() == ERROR)
+        {
+            eepStop();
+            return(ERROR);
+        }
+
+        *buf++ = eepReadByte();
+        eepWriteAck(1);
+        eepStop();
+
+        if ((addr == 0) && (i != (cnt-1)))    /* is it the same block ? */
+        {
+            if (block == FIRST_BLOCK)
+                block = SECOND_BLOCK;
+            else
+                return(ERROR);
+        }
+    }
+    return(cnt);
+}
+
+/*----------------------------------------------------------------------------*/
+/*
+ *
+ * Write bytes to EEPROM
+ *
+ */
+int el_srom_store (addr, buf, cnt, device, block)
+unsigned char    addr, *buf, device, block;
+int        cnt;
+{
+    register int i, retVal;
+
+    for (i=0;i<cnt;i++)
+    {
+        retVal = ERROR;
+        do
+        {
+            eepStart();
+            eepWriteByte(0xA0 | device | block);
+            if ((retVal = eepReadAck()) == ERROR)
+                eepStop();
+        } while (retVal == ERROR);
+
+        eepWriteByte(addr++);
+        if (eepReadAck() == ERROR)  return(ERROR);
+
+        if ((addr == 0) && (i != (cnt-1)))    /* is it the same block ? */
+        {
+            if (block == FIRST_BLOCK)
+                block = SECOND_BLOCK;
+            else
+            return(ERROR);
+        }
+
+        eepWriteByte(*buf++);
+        if (eepReadAck() == ERROR)
+            return(ERROR);
+
+        eepStop();
+    }
+    return(cnt);
+}
+
+/*----------------------------------------------------------------------------*/
+/*
+ * calculate checksum for ELTEC revision srom
+ */
+unsigned long el_srom_checksum (ptr, size)
+register unsigned char *ptr;
+unsigned long size;
+{
+    u_long f, accu = 0;
+    u_int  i;
+    u_char byte;
+
+    for (; size; size--)
+    {
+        byte = *ptr++;
+        for (i = 8; i; i--)
+        {
+            f =  ((byte & 1) ^ (accu & 1)) ? 0x84083001 : 0;
+            accu >>= 1; accu ^= f;
+            byte >>= 1;
+        }
+    }
+    return(accu);
+}
+
+/*----------------------------------------------------------------------------*/
diff --git a/board/eltec/bab7xx/u-boot.lds b/board/eltec/bab7xx/u-boot.lds
new file mode 100644
index 0000000..7b10c0d
--- /dev/null
+++ b/board/eltec/bab7xx/u-boot.lds
@@ -0,0 +1,129 @@
+/*
+ * (C) Copyright 2001
+ * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * u-boot.lds - linker script for U-Boot on the Galileo Eval Board.
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    cpu/74xx_7xx/start.o	(.text)
+
+/* store the environment in a seperate sector in the boot flash */
+/*    . = env_offset; */
+/*    common/environment.o(.text) */
+
+    *(.text)
+    *(.fixup)
+    *(.got1)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(.rodata)
+    *(.rodata1)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}