diff --git a/drivers/bootcount/Kconfig b/drivers/bootcount/Kconfig
index 0de2b7b..607027c 100644
--- a/drivers/bootcount/Kconfig
+++ b/drivers/bootcount/Kconfig
@@ -144,6 +144,18 @@
 	  is not cleared on softreset.
 	  compatible = "u-boot,bootcount";
 
+config DM_BOOTCOUNT_SYSCON
+	bool "Support SYSCON devices as a backing store for bootcount"
+	select REGMAP
+	select SYSCON
+	help
+	  Enable reading/writing the bootcount value in a DM SYSCON device.
+	  The driver supports a fixed 32 bits size register using the native
+	  endianness. However, this can be controlled from the SYSCON DT node
+	  configuration.
+
+	  Accessing the backend is done using the regmap interface.
+
 endmenu
 
 endif
diff --git a/drivers/bootcount/Makefile b/drivers/bootcount/Makefile
index 12658ff..3a784bb 100644
--- a/drivers/bootcount/Makefile
+++ b/drivers/bootcount/Makefile
@@ -14,3 +14,4 @@
 obj-$(CONFIG_DM_BOOTCOUNT_RTC)  += rtc.o
 obj-$(CONFIG_DM_BOOTCOUNT_I2C_EEPROM)	+= i2c-eeprom.o
 obj-$(CONFIG_DM_BOOTCOUNT_SPI_FLASH)	+= spi-flash.o
+obj-$(CONFIG_DM_BOOTCOUNT_SYSCON) += bootcount_syscon.o
diff --git a/drivers/bootcount/bootcount_syscon.c b/drivers/bootcount/bootcount_syscon.c
new file mode 100644
index 0000000..413fd5b
--- /dev/null
+++ b/drivers/bootcount/bootcount_syscon.c
@@ -0,0 +1,159 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) Vaisala Oyj. All rights reserved.
+ */
+
+#include <common.h>
+#include <bootcount.h>
+#include <dm.h>
+#include <dm/device_compat.h>
+#include <linux/ioport.h>
+#include <regmap.h>
+#include <syscon.h>
+
+#define BYTES_TO_BITS(bytes) ((bytes) << 3)
+#define GEN_REG_MASK(val_size, val_addr)                                       \
+	(GENMASK(BYTES_TO_BITS(val_size) - 1, 0)                               \
+	 << (!!((val_addr) == 0x02) * BYTES_TO_BITS(2)))
+#define GET_DEFAULT_VALUE(val_size)                                            \
+	(CONFIG_SYS_BOOTCOUNT_MAGIC >>                                         \
+	 (BYTES_TO_BITS((sizeof(u32) - (val_size)))))
+
+/**
+ * struct bootcount_syscon_priv - driver's private data
+ *
+ * @regmap: syscon regmap
+ * @reg_addr: register address used to store the bootcount value
+ * @size: size of the bootcount value (2 or 4 bytes)
+ * @magic: magic used to validate/save the bootcount value
+ * @magic_mask: magic value bitmask
+ * @reg_mask: mask used to identify the location of the bootcount value
+ * in the register when 2 bytes length is used
+ * @shift: value used to extract the botcount value from the register
+ */
+struct bootcount_syscon_priv {
+	struct regmap *regmap;
+	fdt_addr_t reg_addr;
+	fdt_size_t size;
+	u32 magic;
+	u32 magic_mask;
+	u32 reg_mask;
+	int shift;
+};
+
+static int bootcount_syscon_set(struct udevice *dev, const u32 val)
+{
+	struct bootcount_syscon_priv *priv = dev_get_priv(dev);
+	u32 regval;
+
+	if ((val & priv->magic_mask) != 0)
+		return -EINVAL;
+
+	regval = (priv->magic & priv->magic_mask) | (val & ~priv->magic_mask);
+
+	if (priv->size == 2) {
+		regval &= 0xffff;
+		regval |= (regval & 0xffff) << BYTES_TO_BITS(priv->size);
+	}
+
+	debug("%s: Prepare to write reg value: 0x%08x with register mask: 0x%08x\n",
+	      __func__, regval, priv->reg_mask);
+
+	return regmap_update_bits(priv->regmap, priv->reg_addr, priv->reg_mask,
+				  regval);
+}
+
+static int bootcount_syscon_get(struct udevice *dev, u32 *val)
+{
+	struct bootcount_syscon_priv *priv = dev_get_priv(dev);
+	u32 regval;
+	int ret;
+
+	ret = regmap_read(priv->regmap, priv->reg_addr, &regval);
+	if (ret)
+		return ret;
+
+	regval &= priv->reg_mask;
+	regval >>= priv->shift;
+
+	if ((regval & priv->magic_mask) == (priv->magic & priv->magic_mask)) {
+		*val = regval & ~priv->magic_mask;
+	} else {
+		dev_err(dev, "%s: Invalid bootcount magic\n", __func__);
+		return -EINVAL;
+	}
+
+	debug("%s: Read bootcount value: 0x%08x from regval: 0x%08x\n",
+	      __func__, *val, regval);
+	return 0;
+}
+
+static int bootcount_syscon_of_to_plat(struct udevice *dev)
+{
+	struct bootcount_syscon_priv *priv = dev_get_priv(dev);
+	fdt_addr_t bootcount_offset;
+	fdt_size_t reg_size;
+
+	priv->regmap = syscon_regmap_lookup_by_phandle(dev, "syscon");
+	if (IS_ERR(priv->regmap)) {
+		dev_err(dev, "%s: Unable to find regmap (%ld)\n", __func__,
+			PTR_ERR(priv->regmap));
+		return PTR_ERR(priv->regmap);
+	}
+
+	priv->reg_addr = dev_read_addr_size_name(dev, "syscon_reg", &reg_size);
+	if (priv->reg_addr == FDT_ADDR_T_NONE) {
+		dev_err(dev, "%s: syscon_reg address not found\n", __func__);
+		return -EINVAL;
+	}
+	if (reg_size != 4) {
+		dev_err(dev, "%s: Unsupported register size: %d\n", __func__,
+			reg_size);
+		return -EINVAL;
+	}
+
+	bootcount_offset = dev_read_addr_size_name(dev, "offset", &priv->size);
+	if (bootcount_offset == FDT_ADDR_T_NONE) {
+		dev_err(dev, "%s: offset configuration not found\n", __func__);
+		return -EINVAL;
+	}
+	if (bootcount_offset + priv->size > reg_size) {
+		dev_err(dev,
+			"%s: Bootcount value doesn't fit in the reserved space\n",
+			__func__);
+		return -EINVAL;
+	}
+	if (priv->size != 2 && priv->size != 4) {
+		dev_err(dev,
+			"%s: Driver supports only 2 and 4 bytes bootcount size\n",
+			__func__);
+		return -EINVAL;
+	}
+
+	priv->magic = GET_DEFAULT_VALUE(priv->size);
+	priv->magic_mask = GENMASK(BYTES_TO_BITS(priv->size) - 1,
+				   BYTES_TO_BITS(priv->size >> 1));
+	priv->shift = !!(bootcount_offset == 0x02) * BYTES_TO_BITS(priv->size);
+	priv->reg_mask = GEN_REG_MASK(priv->size, bootcount_offset);
+
+	return 0;
+}
+
+static const struct bootcount_ops bootcount_syscon_ops = {
+	.get = bootcount_syscon_get,
+	.set = bootcount_syscon_set,
+};
+
+static const struct udevice_id bootcount_syscon_ids[] = {
+	{ .compatible = "u-boot,bootcount-syscon" },
+	{}
+};
+
+U_BOOT_DRIVER(bootcount_syscon) = {
+	.name = "bootcount-syscon",
+	.id = UCLASS_BOOTCOUNT,
+	.of_to_plat = bootcount_syscon_of_to_plat,
+	.priv_auto = sizeof(struct bootcount_syscon_priv),
+	.of_match = bootcount_syscon_ids,
+	.ops = &bootcount_syscon_ops,
+};